| Age | Commit message (Collapse) | Author |
|---|
|
While this code is executed with the wait_lock held, a reader can
acquire the lock without holding wait_lock. The writer side loops
checking the value with the atomic_cond_read_acquire(), but only truly
acquires the lock when the compare-and-exchange is completed
successfully which isn’t ordered. This exposes the window between the
acquire and the cmpxchg to an A-B-A problem which allows reads
following the lock acquisition to observe values speculatively before
the write lock is truly acquired.
We've seen a problem in epoll where the reader does a xchg while
holding the read lock, but the writer can see a value change out from
under it.
Writer | Reader
--------------------------------------------------------------------------------
ep_scan_ready_list() |
|- write_lock_irq() |
|- queued_write_lock_slowpath() |
|- atomic_cond_read_acquire() |
| read_lock_irqsave(&ep->lock, flags);
--> (observes value before unlock) | chain_epi_lockless()
| | epi->next = xchg(&ep->ovflist, epi);
| | read_unlock_irqrestore(&ep->lock, flags);
| |
| atomic_cmpxchg_relaxed() |
|-- READ_ONCE(ep->ovflist); |
A core can order the read of the ovflist ahead of the
atomic_cmpxchg_relaxed(). Switching the cmpxchg to use acquire
semantics addresses this issue at which point the atomic_cond_read can
be switched to use relaxed semantics.
Fixes: b519b56e378ee ("locking/qrwlock: Use atomic_cond_read_acquire() when spinning in qrwlock")
Signed-off-by: Ali Saidi <alisaidi@amazon.com>
[peterz: use try_cmpxchg()]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steve Capper <steve.capper@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Waiman Long <longman@redhat.com>
Tested-by: Steve Capper <steve.capper@arm.com>
|
|
The CXL Identify Memory Device output payload emits capacity in 256MB
units. The driver is treating the capacity field as bytes. This was
missed because QEMU reports bytes when it should report bytes / 256MB.
Fixes: 8adaf747c9f0 ("cxl/mem: Find device capabilities")
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Cc: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/161862021044.3259705.7008520073059739760.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
When I added support to allow generic netlink multicast groups to be
restricted to subscribers with CAP_NET_ADMIN I was unaware that a
genl_bind implementation already existed in the past.
It was reverted due to ABBA deadlock:
1. ->netlink_bind gets called with the table lock held.
2. genetlink bind callback is invoked, it grabs the genl lock.
But when a new genl subsystem is (un)registered, these two locks are
taken in reverse order.
One solution would be to revert again and add a comment in genl
referring 1e82a62fec613, "genetlink: remove genl_bind").
This would need a second change in mptcp to not expose the raw token
value anymore, e.g. by hashing the token with a secret key so userspace
can still associate subflow events with the correct mptcp connection.
However, Paolo Abeni reminded me to double-check why the netlink table is
locked in the first place.
I can't find one. netlink_bind() is already called without this lock
when userspace joins a group via NETLINK_ADD_MEMBERSHIP setsockopt.
Same holds for the netlink_unbind operation.
Digging through the history, commit f773608026ee1
("netlink: access nlk groups safely in netlink bind and getname")
expanded the lock scope.
commit 3a20773beeeeade ("net: netlink: cap max groups which will be considered in netlink_bind()")
... removed the nlk->ngroups access that the lock scope
extension was all about.
Reduce the lock scope again and always call ->netlink_bind without
the table lock.
The Fixes tag should be vs. the patch mentioned in the link below,
but that one got squash-merged into the patch that came earlier in the
series.
Fixes: 4d54cc32112d8d ("mptcp: avoid lock_fast usage in accept path")
Link: https://lore.kernel.org/mptcp/20210213000001.379332-8-mathew.j.martineau@linux.intel.com/T/#u
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Xin Long <lucien.xin@gmail.com>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Sean Tranchetti <stranche@codeaurora.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull io_uring fix from Jens Axboe:
"Fix for a potential hang at exit with SQPOLL from Pavel"
* tag 'io_uring-5.12-2021-04-16' of git://git.kernel.dk/linux-block:
io_uring: fix early sqd_list removal sqpoll hangs
|
|
Fix various kernel-doc warnings in lib/ due to missing or erroneous
function names.
Add kernel-doc for some function parameters that was missing. Use
kernel-doc "Return:" notation in earlycpio.c.
Quietens the following warnings:
lib/earlycpio.c:61: warning: expecting prototype for cpio_data find_cpio_data(). Prototype was for find_cpio_data() instead
lib/lru_cache.c:640: warning: expecting prototype for lc_dump(). Prototype was for lc_seq_dump_details() instead
lru_cache.c:90: warning: Function parameter or member 'cache' not described in 'lc_create'
lib/parman.c:368: warning: expecting prototype for parman_item_del(). Prototype was for parman_item_remove() instead
parman.c:309: warning: Excess function parameter 'prority' description in 'parman_prio_init'
lib/radix-tree.c:703: warning: expecting prototype for __radix_tree_insert(). Prototype was for radix_tree_insert() instead
radix-tree.c:180: warning: Excess function parameter 'addr' description in 'radix_tree_find_next_bit'
radix-tree.c:180: warning: Excess function parameter 'size' description in 'radix_tree_find_next_bit'
radix-tree.c:931: warning: Function parameter or member 'iter' not described in 'radix_tree_iter_replace'
Link: https://lkml.kernel.org/r/20210411221756.15461-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Lars Ellenberg <lars.ellenberg@linbit.com>
Cc: Jiri Pirko <jiri@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
With clang-11+, the code is broken due to my kvmalloc() conversion
(which predated the clang-11 support code) leaving one vmalloc() in
place. Fix that.
Link: https://lkml.kernel.org/r/20210412214210.6e1ecca9cdc5.I24459763acf0591d5e6b31c7e3a59890d802f79c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
READ_ONCE() cannot be used for reading PTEs. Use ptep_get() instead, to
avoid the following errors:
CC mm/ptdump.o
In file included from <command-line>:
mm/ptdump.c: In function 'ptdump_pte_entry':
include/linux/compiler_types.h:320:38: error: call to '__compiletime_assert_207' declared with attribute error: Unsupported access size for {READ,WRITE}_ONCE().
320 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| ^
include/linux/compiler_types.h:301:4: note: in definition of macro '__compiletime_assert'
301 | prefix ## suffix(); \
| ^~~~~~
include/linux/compiler_types.h:320:2: note: in expansion of macro '_compiletime_assert'
320 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| ^~~~~~~~~~~~~~~~~~~
include/asm-generic/rwonce.h:36:2: note: in expansion of macro 'compiletime_assert'
36 | compiletime_assert(__native_word(t) || sizeof(t) == sizeof(long long), \
| ^~~~~~~~~~~~~~~~~~
include/asm-generic/rwonce.h:49:2: note: in expansion of macro 'compiletime_assert_rwonce_type'
49 | compiletime_assert_rwonce_type(x); \
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
mm/ptdump.c:114:14: note: in expansion of macro 'READ_ONCE'
114 | pte_t val = READ_ONCE(*pte);
| ^~~~~~~~~
make[2]: *** [mm/ptdump.o] Error 1
See commit 481e980a7c19 ("mm: Allow arches to provide ptep_get()") and
commit c0e1c8c22beb ("powerpc/8xx: Provide ptep_get() with 16k pages")
for details.
Link: https://lkml.kernel.org/r/912b349e2bcaa88939904815ca0af945740c6bd4.1618478922.git.christophe.leroy@csgroup.eu
Fixes: 30d621f6723b ("mm: add generic ptdump")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Steven Price <steven.price@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Mapping dirty helpers have, so far, been only used on X86, but a port of
vmwgfx to ARM64 exposed a problem which results in a compilation error
on ARM64 systems:
mm/mapping_dirty_helpers.c: In function `wp_clean_pud_entry':
mm/mapping_dirty_helpers.c:172:32: error: implicit declaration of function `pud_dirty'; did you mean `pmd_dirty'? [-Werror=implicit-function-declaration]
This is due to the fact that mapping_dirty_helpers code assumes that
pud_dirty is always defined, which is not the case for architectures
that don't define CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD.
ARM64 arch is a little inconsistent when it comes to PUD hugepage
helpers, e.g. it defines pud_young but not pud_dirty but regardless of
that the core kernel code shouldn't assume that any of the PUD hugepage
helpers are available unless CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD
is defined. This prevents compilation errors whenever one of the
drivers is ported to new architectures.
Link: https://lkml.kernel.org/r/20210409165151.694574-1-zackr@vmware.com
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Thomas Hellstrm (Intel) <thomas_os@shipmail.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The ia64_mf() macro defined in tools/arch/ia64/include/asm/barrier.h is
already defined in <asm/gcc_intrin.h> on ia64 which causes libbpf
failing to build:
CC /usr/src/linux/tools/bpf/bpftool//libbpf/staticobjs/libbpf.o
In file included from /usr/src/linux/tools/include/asm/barrier.h:24,
from /usr/src/linux/tools/include/linux/ring_buffer.h:4,
from libbpf.c:37:
/usr/src/linux/tools/include/asm/../../arch/ia64/include/asm/barrier.h:43: error: "ia64_mf" redefined [-Werror]
43 | #define ia64_mf() asm volatile ("mf" ::: "memory")
|
In file included from /usr/include/ia64-linux-gnu/asm/intrinsics.h:20,
from /usr/include/ia64-linux-gnu/asm/swab.h:11,
from /usr/include/linux/swab.h:8,
from /usr/include/linux/byteorder/little_endian.h:13,
from /usr/include/ia64-linux-gnu/asm/byteorder.h:5,
from /usr/src/linux/tools/include/uapi/linux/perf_event.h:20,
from libbpf.c:36:
/usr/include/ia64-linux-gnu/asm/gcc_intrin.h:382: note: this is the location of the previous definition
382 | #define ia64_mf() __asm__ volatile ("mf" ::: "memory")
|
cc1: all warnings being treated as errors
Thus, remove the definition from tools/arch/ia64/include/asm/barrier.h.
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There is no longer an ia64-specific version of the errno.h header below
arch/ia64/include/uapi/asm/, so trying to build tools/bpf fails with:
CC /usr/src/linux/tools/bpf/bpftool/btf_dumper.o
In file included from /usr/src/linux/tools/include/linux/err.h:8,
from btf_dumper.c:11:
/usr/src/linux/tools/include/uapi/asm/errno.h:13:10: fatal error: ../../../arch/ia64/include/uapi/asm/errno.h: No such file or directory
13 | #include "../../../arch/ia64/include/uapi/asm/errno.h"
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Thus, just remove the inclusion of the ia64-specific errno.h so that the
build will use the generic errno.h header on this target which was used
there anyway as the ia64-specific errno.h was just a wrapper for the
generic header.
Fixes: c25f867ddd00 ("ia64: remove unneeded uapi asm-generic wrappers")
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix IA64 discontig.c Section mismatch warnings.
When CONFIG_SPARSEMEM=y and CONFIG_MEMORY_HOTPLUG=y, the functions
computer_pernodesize() and scatter_node_data() should not be marked as
__meminit because they are needed after init, on any memory hotplug
event. Also, early_nr_cpus_node() is called by compute_pernodesize(),
so early_nr_cpus_node() cannot be __meminit either.
WARNING: modpost: vmlinux.o(.text.unlikely+0x1612): Section mismatch in reference from the function arch_alloc_nodedata() to the function .meminit.text:compute_pernodesize()
The function arch_alloc_nodedata() references the function __meminit compute_pernodesize().
This is often because arch_alloc_nodedata lacks a __meminit annotation or the annotation of compute_pernodesize is wrong.
WARNING: modpost: vmlinux.o(.text.unlikely+0x1692): Section mismatch in reference from the function arch_refresh_nodedata() to the function .meminit.text:scatter_node_data()
The function arch_refresh_nodedata() references the function __meminit scatter_node_data().
This is often because arch_refresh_nodedata lacks a __meminit annotation or the annotation of scatter_node_data is wrong.
WARNING: modpost: vmlinux.o(.text.unlikely+0x1502): Section mismatch in reference from the function compute_pernodesize() to the function .meminit.text:early_nr_cpus_node()
The function compute_pernodesize() references the function __meminit early_nr_cpus_node().
This is often because compute_pernodesize lacks a __meminit annotation or the annotation of early_nr_cpus_node is wrong.
Link: https://lkml.kernel.org/r/20210411001201.3069-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix ia64 generic_defconfig duplicate entries, as warned by:
arch/ia64/configs/generic_defconfig: warning: override: reassigning to symbol ATA: => 58
arch/ia64/configs/generic_defconfig: warning: override: reassigning to symbol ATA_PIIX: => 59
These 2 symbols still have the same value as in the removed lines.
Link: https://lkml.kernel.org/r/20210411020255.18052-1-rdunlap@infradead.org
Fixes: c331649e6371 ("ia64: Use libata instead of the legacy ide driver in defconfigs")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
e1000's #define of CONFIG_RAM_BASE conflicts with a Kconfig symbol in
arch/csky/Kconfig.
The symbol in e1000 has been around longer, so change arch/csky/ to use
DRAM_BASE instead of RAM_BASE to remove the conflict. (although e1000
is also a 2-line change)
Link: https://lkml.kernel.org/r/20210411055335.7111-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Guo Ren <guoren@kernel.org>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
CONFIG_KASAN_STACK and CONFIG_KASAN_STACK_ENABLE both enable KASAN stack
instrumentation, but we should only need one config, so that we remove
CONFIG_KASAN_STACK_ENABLE and make CONFIG_KASAN_STACK workable. see [1].
When enable KASAN stack instrumentation, then for gcc we could do no
prompt and default value y, and for clang prompt and default value n.
This patch fixes the following compilation warning:
include/linux/kasan.h:333:30: warning: 'CONFIG_KASAN_STACK' is not defined, evaluates to 0 [-Wundef]
[akpm@linux-foundation.org: fix merge snafu]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=210221 [1]
Link: https://lkml.kernel.org/r/20210226012531.29231-1-walter-zh.wu@mediatek.com
Fixes: d9b571c885a8 ("kasan: fix KASAN_STACK dependency for HW_TAGS")
Signed-off-by: Walter Wu <walter-zh.wu@mediatek.com>
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
gcc-11 adds support for -fsanitize=kernel-hwaddress, so it becomes
possible to enable CONFIG_KASAN_SW_TAGS.
Unfortunately this fails to build at the moment, because the
corresponding command line arguments use llvm specific syntax.
Change it to use the cc-param macro instead, which works on both clang
and gcc.
[elver@google.com: fixup for "kasan: fix hwasan build for gcc"]
Link: https://lkml.kernel.org/r/YHQZVfVVLE/LDK2v@elver.google.com
Link: https://lkml.kernel.org/r/20210323124112.1229772-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Acked-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix stray kernel-doc warnings in mm/ due to mis-typed or missing function
names.
Quietens these kernel-doc warnings:
mm/mmu_gather.c:264: warning: expecting prototype for tlb_gather_mmu(). Prototype was for __tlb_gather_mmu() instead
mm/oom_kill.c:180: warning: expecting prototype for Check whether unreclaimable slab amount is greater than(). Prototype was for should_dump_unreclaim_slab() instead
mm/shuffle.c:155: warning: expecting prototype for shuffle_free_memory(). Prototype was for __shuffle_free_memory() instead
Link: https://lkml.kernel.org/r/20210411210642.11362-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2021-04-17
The following pull-request contains BPF updates for your *net* tree.
We've added 10 non-merge commits during the last 9 day(s) which contain
a total of 8 files changed, 175 insertions(+), 111 deletions(-).
The main changes are:
1) Fix a potential NULL pointer dereference in libbpf's xsk
umem handling, from Ciara Loftus.
2) Mitigate a speculative oob read of up to map value size by
tightening the masking window, from Daniel Borkmann.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update my email and change myself to Reviewer.
Signed-off-by: Lijun Pan <lijunp213@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update various selftest error messages:
* The 'Rx tried to sub from different maps, paths, or prohibited types'
is reworked into more specific/differentiated error messages for better
guidance.
* The change into 'value -4294967168 makes map_value pointer be out of
bounds' is due to moving the mixed bounds check into the speculation
handling and thus occuring slightly later than above mentioned sanity
check.
* The change into 'math between map_value pointer and register with
unbounded min value' is similarly due to register sanity check coming
before the mixed bounds check.
* The case of 'map access: known scalar += value_ptr from different maps'
now loads fine given masks are the same from the different paths (despite
max map value size being different).
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
|
|
This work tightens the offset mask we use for unprivileged pointer arithmetic
in order to mitigate a corner case reported by Piotr and Benedict where in
the speculative domain it is possible to advance, for example, the map value
pointer by up to value_size-1 out-of-bounds in order to leak kernel memory
via side-channel to user space.
Before this change, the computed ptr_limit for retrieve_ptr_limit() helper
represents largest valid distance when moving pointer to the right or left
which is then fed as aux->alu_limit to generate masking instructions against
the offset register. After the change, the derived aux->alu_limit represents
the largest potential value of the offset register which we mask against which
is just a narrower subset of the former limit.
For minimal complexity, we call sanitize_ptr_alu() from 2 observation points
in adjust_ptr_min_max_vals(), that is, before and after the simulated alu
operation. In the first step, we retieve the alu_state and alu_limit before
the operation as well as we branch-off a verifier path and push it to the
verification stack as we did before which checks the dst_reg under truncation,
in other words, when the speculative domain would attempt to move the pointer
out-of-bounds.
In the second step, we retrieve the new alu_limit and calculate the absolute
distance between both. Moreover, we commit the alu_state and final alu_limit
via update_alu_sanitation_state() to the env's instruction aux data, and bail
out from there if there is a mismatch due to coming from different verification
paths with different states.
Reported-by: Piotr Krysiuk <piotras@gmail.com>
Reported-by: Benedict Schlueter <benedict.schlueter@rub.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Benedict Schlueter <benedict.schlueter@rub.de>
|
|
Add a small sanitize_needed() helper function and move sanitize_val_alu()
out of the main opcode switch. In upcoming work, we'll move sanitize_ptr_alu()
as well out of its opcode switch so this helps to streamline both.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
|
|
Move the bounds check in adjust_ptr_min_max_vals() into a small helper named
sanitize_check_bounds() in order to simplify the former a bit.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
|
|
Consolidate all error handling and provide more user-friendly error messages
from sanitize_ptr_alu() and sanitize_val_alu().
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
|
|
Small refactor with no semantic changes in order to consolidate the max
ptr_limit boundary check.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
|
|
The mixed signed bounds check really belongs into retrieve_ptr_limit()
instead of outside of it in adjust_ptr_min_max_vals(). The reason is
that this check is not tied to PTR_TO_MAP_VALUE only, but to all pointer
types that we handle in retrieve_ptr_limit() and given errors from the latter
propagate back to adjust_ptr_min_max_vals() and lead to rejection of the
program, it's a better place to reside to avoid anything slipping through
for future types. The reason why we must reject such off_reg is that we
otherwise would not be able to derive a mask, see details in 9d7eceede769
("bpf: restrict unknown scalars of mixed signed bounds for unprivileged").
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
|
|
Small refactor to drag off_reg into sanitize_ptr_alu(), so we later on can
use off_reg for generalizing some of the checks for all pointer types.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
|
|
We forbid adding unknown scalars with mixed signed bounds due to the
spectre v1 masking mitigation. Hence this also needs bypass_spec_v1
flag instead of allow_ptr_leaks.
Fixes: 2c78ee898d8f ("bpf: Implement CAP_BPF")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
|
|
The broadcast device is switched to oneshot mode when the system switches
to oneshot mode. If a broadcast clock event device is registered after the
system switched to oneshot mode, it will stay in periodic mode forever.
Ensure that a late registered device which is selected as broadcast device
is initialized in oneshot mode when the system already uses oneshot mode.
[ tglx: Massage changelog ]
Signed-off-by: Jindong Yue <jindong.yue@nxp.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210331083318.21794-1-jindong.yue@nxp.com
|
|
The function tick_check_replacement() is the combination of
tick_check_percpu() and tick_check_preferred(), but tick_check_new_device()
has the same logic open coded.
Use the helper to simplify the code.
[ tglx: Massage changelog ]
Signed-off-by: Wang Wensheng <wangwensheng4@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210326022328.3266-1-wangwensheng4@huawei.com
|
|
The timecounter is not modified in this function. Mark it as const.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210303103544.994855-1-mkl@pengutronix.de
|
|
The write buffer comes from user and should be const.
Constify write buffer in mtd core and across all _write_user_prot_reg()
users. cfi_cmdset_{0001, 0002} and onenand_base will pay the cost of an
explicit cast to discard the const qualifier since the beginning, since
they are using an otp_op_t function prototype that is used for both reads
and writes. mtd_dataflash and SPI NOR will benefit of the const buffer
because they are using different paths for writes and reads.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210403060931.7119-1-tudor.ambarus@microchip.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"A handful of fixes:
- a fix to properly select SPARSEMEM_STATIC on rv32
- a few fixes to kprobes
I don't generally like sending stuff this late, but these all seem
pretty safe"
* tag 'riscv-for-linus-5.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: keep interrupts disabled for BREAKPOINT exception
riscv: kprobes/ftrace: Add recursion protection to the ftrace callback
riscv: add do_page_fault and do_trap_break into the kprobes blacklist
riscv: Fix spelling mistake "SPARSEMEM" to "SPARSMEM"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"Fix kernel compilation when using the LLVM integrated assembly.
A recent commit (2decad92f473, "arm64: mte: Ensure TIF_MTE_ASYNC_FAULT
is set atomically") broke the kernel build when using the LLVM
integrated assembly (only noticeable with clang-12 as MTE is not
supported by earlier versions and the code in question not compiled).
The Fixes: tag in the commit refers to the original patch introducing
subsections for the alternative code sequences"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: alternatives: Move length validation in alternative_{insn, endif}
|
|
Pull drm fixes from Daniel Vetter:
"I pinged the usual suspects, only intel fixes pending"
* tag 'drm-fixes-2021-04-16' of git://anongit.freedesktop.org/drm/drm:
drm/i915/display/vlv_dsi: Do not skip panel_pwr_cycle_delay when disabling the panel
drm/i915: Don't zero out the Y plane's watermarks
drm/i915/dpcd_bl: Don't try vesa interface unless specified by VBT
|
|
The spi controller supports 44-bit address space on AXI in DMA mode,
so set dma_addr_t width to 44-bit to avoid using a swiotlb mapping.
In addition, if dma_map_single fails, it should return immediately
instead of continuing doing the DMA operation which bases on invalid
address.
This fixes the following crash which occurs in reading a big block
from flash:
[ 123.633577] zynqmp-qspi ff0f0000.spi: swiotlb buffer is full (sz: 4194304 bytes), total 32768 (slots), used 0 (slots)
[ 123.644230] zynqmp-qspi ff0f0000.spi: ERR:rxdma:memory not mapped
[ 123.784625] Unable to handle kernel paging request at virtual address 00000000003fffc0
[ 123.792536] Mem abort info:
[ 123.795313] ESR = 0x96000145
[ 123.798351] EC = 0x25: DABT (current EL), IL = 32 bits
[ 123.803655] SET = 0, FnV = 0
[ 123.806693] EA = 0, S1PTW = 0
[ 123.809818] Data abort info:
[ 123.812683] ISV = 0, ISS = 0x00000145
[ 123.816503] CM = 1, WnR = 1
[ 123.819455] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000805047000
[ 123.825887] [00000000003fffc0] pgd=0000000803b45003, p4d=0000000803b45003, pud=0000000000000000
[ 123.834586] Internal error: Oops: 96000145 [#1] PREEMPT SMP
Fixes: 1c26372e5aa9 ("spi: spi-zynqmp-gqspi: Update driver to use spi-mem framework")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Link: https://lore.kernel.org/r/20210416004652.2975446-6-quanyang.wang@windriver.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When handling op->addr, it is using the buffer "tmpbuf" which has been
freed. This will trigger a use-after-free KASAN warning. Let's use
temporary variables to store op->addr.val and op->cmd.opcode to fix
this issue.
Fixes: 1c26372e5aa9 ("spi: spi-zynqmp-gqspi: Update driver to use spi-mem framework")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Link: https://lore.kernel.org/r/20210416004652.2975446-5-quanyang.wang@windriver.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
During a transfer the driver filled the fifo with 4bytes,
even if the data that needs to be transfer is less that 4bytes.
This resulted in slab-out-of-bounds bug in KernelAddressSanitizer.
This patch resolves slab-out-of-bounds bug by filling the fifo
with the number of bytes that needs to transferred.
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>
Link: https://lore.kernel.org/r/20210416004652.2975446-4-quanyang.wang@windriver.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
After calling platform_set_drvdata(pdev, xqspi) in probe, the return
value of dev_get_drvdata(dev) is a pointer to struct zynqmp_qspi but
not struct spi_controller. A wrong structure type passing to the
functions spi_controller_suspend/resume will hang the system.
And we should check the return value of spi_controller_suspend, if
an error is returned, return it to PM subsystem to stop suspend.
Also, GQSPI_EN_MASK should be written to GQSPI_EN_OFST to enable
the spi controller in zynqmp_qspi_resume since it was disabled in
zynqmp_qspi_suspend before.
Fixes: 1c26372e5aa9 ("spi: spi-zynqmp-gqspi: Update driver to use spi-mem framework")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Link: https://lore.kernel.org/r/20210416004652.2975446-3-quanyang.wang@windriver.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The clks "pclk" and "ref_clk" are enabled twice during the probe. The
first time is in the function zynqmp_qspi_probe and the second time is
in zynqmp_qspi_setup_op which is called by devm_spi_register_controller.
Then calling zynqmp_qspi_remove (rmmod this module) to disable these clks
will trigger a warning as below:
[ 309.124604] Unpreparing enabled qspi_ref
[ 309.128641] WARNING: CPU: 1 PID: 537 at drivers/clk/clk.c:824 clk_core_unprepare+0x108/0x110
Since pm_runtime works now, clks can be enabled/disabled by calling
zynqmp_runtime_suspend/resume. So we don't need to enable these clks
explicitly in zynqmp_qspi_setup_op. Remove them to fix this issue.
And remove clk enabling/disabling in zynqmp_qspi_resume because there is
no spi transfer operation so enabling ref_clk is redundant meanwhile pclk
is not disabled for it is shared with other peripherals.
Furthermore replace clk_enable/disable with clk_prepare_enable and
clk_disable_unprepare in runtime_suspend/resume functions.
Fixes: 1c26372e5aa9 ("spi: spi-zynqmp-gqspi: Update driver to use spi-mem framework")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Link: https://lore.kernel.org/r/20210416004652.2975446-2-quanyang.wang@windriver.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use SPDX-License-Identifier: GPL-2.0-only, instead of hand writing it.
This also removes a reference to http://www.xyratex.com which seems to be
down.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
'hpre_cfg_by_dsm' has checked and printed error path internally. It is not
necessary to do it here, so remove it.
It should return error immediately when return value of 'hpre_cfg_by_dsm'
is non-zero, and no need to execute the remaining sentences.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When the received sqe is abnormal, the error message in the sqe written
back by the hardware is printed to help to analyze the abnormal causes.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The return value of 'le32_to_cpu' is unsigned, so change the
variable type from 'int' to 'unsigned int'.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
There are two spaces after return, just keep one.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Debian's clang carries a patch that makes the default FPU mode
'vfp3-d16' instead of 'neon' for 'armv7-a' to avoid generating NEON
instructions on hardware that does not support them:
https://salsa.debian.org/pkg-llvm-team/llvm-toolchain/-/raw/5a61ca6f21b4ad8c6ac4970e5ea5a7b5b4486d22/debian/patches/clang-arm-default-vfp3-on-armv7a.patch
https://bugs.debian.org/841474
https://bugs.debian.org/842142
https://bugs.debian.org/914268
This results in the following build error when clang's integrated
assembler is used because the '.arch' directive overrides the '.fpu'
directive:
arch/arm/crypto/curve25519-core.S:25:2: error: instruction requires: NEON
vmov.i32 q0, #1
^
arch/arm/crypto/curve25519-core.S:26:2: error: instruction requires: NEON
vshr.u64 q1, q0, #7
^
arch/arm/crypto/curve25519-core.S:27:2: error: instruction requires: NEON
vshr.u64 q0, q0, #8
^
arch/arm/crypto/curve25519-core.S:28:2: error: instruction requires: NEON
vmov.i32 d4, #19
^
Shuffle the order of the '.arch' and '.fpu' directives so that the code
builds regardless of the default FPU mode. This has been tested against
both clang with and without Debian's patch and GCC.
Cc: stable@vger.kernel.org
Fixes: d8f1308a025f ("crypto: arm/curve25519 - wire up NEON implementation")
Link: https://github.com/ClangBuiltLinux/continuous-integration2/issues/118
Reported-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Jessica Clarke <jrtc27@jrtc27.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Enable the detection of hangs by setting watchdog timers (WDTs) on
generations that supports that feature.
The default timeout value comes from HW specs. WTDs are reset each time
an accelerator wins arbitration and is able to send/read a command to/from
an accelerator.
The value has added significant margin to make sure there are no spurious
timeouts. The scope of watchdog is per QAT device.
If a timeout is detected, the firmware resets the accelerator and
returns a response descriptor with an appropriate error code.
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add data cleared operation for sge data.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The buffer of the hardware sge needs to be initialized by
soft sgl.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add some dfx logs in some abnormal exit situations.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Delete unneeded variable initialization
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
