summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-04-15cxl/mem: Fix register block offset calculationBen Widawsky
The "Register Offset Low" register of a "DVSEC Register Locator" contains the 64K aligned offset for the registers along with the BAR indicator and an id. The implementation was treating the "Register Block Offset Low" field a value rather than as a pre-aligned component of the 64-bit offset. So, just mask, don't mask and shift (FIELD_GET). The user visible result of this bug is that the driver fails to bind to the device after none of the required blocks are found. This was missed earlier because the primary development done in the QEMU environment only uses 0 offsets, i.e. 0 shifted is still 0. Fixes: 8adaf747c9f0 ("cxl/mem: Find device capabilities") Reported-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Link: https://lore.kernel.org/r/20210415232610.603273-1-ben.widawsky@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-04-15Merge branch 'ch_tlss-fixes'David S. Miller
Vinay Kumar Yadav says: ==================== chelsio/ch_ktls: chelsio inline tls driver bug fixes This series of patches fix following bugs in Chelsio inline tls driver. Patch1: kernel panic. Patch2: connection close issue. Patch3: tcb close call issue. Patch4: unnecessary snd_una update. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-15ch_ktls: do not send snd_una update to TCB in middleVinay Kumar Yadav
snd_una update should not be done when the same skb is being sent out.chcr_short_record_handler() sends it again even though SND_UNA update is already sent for the skb in chcr_ktls_xmit(), which causes mismatch in un-acked TCP seq number, later causes problem in sending out complete record. Fixes: 429765a149f1 ("chcr: handle partial end part of a record") Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-15ch_ktls: tcb close causes tls connection failureVinay Kumar Yadav
HW doesn't need marking TCB closed. This TCB state change sometimes causes problem to the new connection which gets the same tid. Fixes: 34aba2c45024 ("cxgb4/chcr : Register to tls add and del callback") Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-15ch_ktls: fix device connection closeVinay Kumar Yadav
When sge queue is full and chcr_ktls_xmit_wr_complete() returns failure, skb is not freed if it is not the last tls record in this skb, causes refcount never gets freed and tls_dev_del() never gets called on this connection. Fixes: 5a4b9fe7fece ("cxgb4/chcr: complete record tx handling") Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-15ch_ktls: Fix kernel panicVinay Kumar Yadav
Taking page refcount is not ideal and causes kernel panic sometimes. It's better to take tx_ctx lock for the complete skb transmit, to avoid page cleanup if ACK received in middle. Fixes: 5a4b9fe7fece ("cxgb4/chcr: complete record tx handling") Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-15Merge tag 'mlx5-fixes-2021-04-14' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2021-04-14 This series provides 3 small fixes to mlx5 driver. Please pull and let me know if there is any problem. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-15docs: sphinx-pre-install: don't barf on beta Sphinx releasesJonathan Corbet
sphinx-pre-install is picky when it comes to parsing sphinx versions; it failed when run with sphinx 4.0.0b1. Tweak the regex to tolerate a trailing "bN" on the version number. Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-04-15i40e: fix the panic when running bpf in xdpdrv modeJason Xing
Fix this panic by adding more rules to calculate the value of @rss_size_max which could be used in allocating the queues when bpf is loaded, which, however, could cause the failure and then trigger the NULL pointer of vsi->rx_rings. Prio to this fix, the machine doesn't care about how many cpus are online and then allocates 256 queues on the machine with 32 cpus online actually. Once the load of bpf begins, the log will go like this "failed to get tracking for 256 queues for VSI 0 err -12" and this "setup of MAIN VSI failed". Thus, I attach the key information of the crash-log here. BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 RIP: 0010:i40e_xdp+0xdd/0x1b0 [i40e] Call Trace: [2160294.717292] ? i40e_reconfig_rss_queues+0x170/0x170 [i40e] [2160294.717666] dev_xdp_install+0x4f/0x70 [2160294.718036] dev_change_xdp_fd+0x11f/0x230 [2160294.718380] ? dev_disable_lro+0xe0/0xe0 [2160294.718705] do_setlink+0xac7/0xe70 [2160294.719035] ? __nla_parse+0xed/0x120 [2160294.719365] rtnl_newlink+0x73b/0x860 Fixes: 41c445ff0f48 ("i40e: main driver core") Co-developed-by: Shujin Li <lishujin@kuaishou.com> Signed-off-by: Shujin Li <lishujin@kuaishou.com> Signed-off-by: Jason Xing <xingwanli@kuaishou.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-15scripts: kernel-doc: improve parsing for kernel-doc comments syntaxAditya Srivastava
Currently kernel-doc does not identify some cases of probable kernel doc comments, for e.g. pointer used as declaration type for identifier, space separated identifier, etc. Some example of these cases in files can be: i)" * journal_t * jbd2_journal_init_dev() - creates and initialises a journal structure" in fs/jbd2/journal.c ii) "* dget, dget_dlock - get a reference to a dentry" in include/linux/dcache.h iii) " * DEFINE_SEQLOCK(sl) - Define a statically allocated seqlock_t" in include/linux/seqlock.h Also improve identification for non-kerneldoc comments. For e.g., i) " * The following functions allow us to read data using a swap map" in kernel/power/swap.c does follow the kernel-doc like syntax, but the content inside does not adheres to the expected format. Improve parsing by adding support for these probable attempts to write kernel-doc comment. Suggested-by: Jonathan Corbet <corbet@lwn.net> Link: https://lore.kernel.org/lkml/87mtujktl2.fsf@meer.lwn.net Signed-off-by: Aditya Srivastava <yashsri421@gmail.com> Link: https://lore.kernel.org/r/20210414192529.9080-1-yashsri421@gmail.com [ jc: fixed some line-length issues ] Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-04-15docs/zh_CN: two minor fixes in zh_CN/doc-guide/Wu XiangCheng
zh_CN/doc-guide/kernel-doc.rst replace a ref tag to solve docs-next warning zh_CN/doc-guide/parse-headers.rst fix an unperfect word Signed-off-by: Wu XiangCheng <bobwxc@email.cn> Link: https://lore.kernel.org/r/20210414033435.GA27907@bobwxc.top Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-04-15Documentation: dev-tools: Add Testing OverviewDavid Gow
The kernel now has a number of testing and debugging tools, and we've seen a bit of confusion about what the differences between them are. Add a basic documentation outlining the testing tools, when to use each, and how they interact. This is a pretty quick overview rather than the idealised "kernel testing guide" that'd probably be optimal, but given the number of times questions like "When do you use KUnit and when do you use Kselftest?" are being asked, it seemed worth at least having something. Hopefully this can form the basis for more detailed documentation later. Signed-off-by: David Gow <davidgow@google.com> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Daniel Latypov <dlatypov@google.com> Link: https://lore.kernel.org/r/20210415054036.581117-1-davidgow@google.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-04-15docs/zh_CN: add translations in zh_CN/dev-tools/gcovBernard Zhao
Add new zh translations * zh_CN/dev-tools/gcov.rst * zh_CN/dev-tools/index.rst and link them to zh_CN/index.rst Signed-off-by: Bernard Zhao <bernard@vivo.com> Reviewed-by: Wu XiangCheng <bobwxc@email.cn> Reviewed-by: Alex Shi <alexs@kernel.org> Reviewed-by: Fangrui Song <maskray@google.com> Signed-off-by: Wu XiangCheng <bobwxc@email.cn> Link: https://lore.kernel.org/r/20210415054304.GA26689@bobwxc.top Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-04-15i2c: mv64xxx: Fix random system lock caused by runtime PMMarek Behún
I noticed a weird bug with this driver on Marvell CN9130 Customer Reference Board. Sometime after boot, the system locks with the following message: [104.071363] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 The system does not respond afterwards, only warns about RCU stalls. This first appeared with commit e5c02cf54154 ("i2c: mv64xxx: Add runtime PM support"). With further experimentation I discovered that adding a delay into mv64xxx_i2c_hw_init() fixes this issue. This function is called before every xfer, due to how runtime PM works in this driver. It seems that in order to work correctly, a delay is needed after the bus is reset in this function. Since there already is a known erratum with this controller needing a delay, I assume that this is just another place this needs to be applied. Therefore I apply the delay only if errata_delay is true. Signed-off-by: Marek Behún <kabel@kernel.org> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Reviewed-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-04-15Merge tag 'nand/for-5.13' of ↵Richard Weinberger
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next MTD core: * Handle possible -EPROBE_DEFER from parse_mtd_partitions() NAND core: * Fix error handling in nand_prog_page_op() (x2) * Add a helper to retrieve the number of ECC bytes per step * Add a helper to retrieve the number of ECC steps * Let ECC engines advertize the exact number of steps * ECC Hamming: - Populate the public nsteps field - Use the public nsteps field * ECC BCH: - Populate the public nsteps field - Use the public nsteps field Raw NAND core: * Add support for secure regions in NAND memory * Try not to use the ECC private structures * Remove duplicate include in rawnand.h * BBT: - Skip bad blocks when searching for the BBT in NAND Raw NAND controller drivers: * Qcom: - Convert bindings to YAML - Use dma_mapping_error() for error check - Add missing nand_cleanup() in error path - Return actual error code instead of -ENODEV - Update last code word register - Add helper to configure location register - Rename parameter name in macro - Add helper to check last code word - Convert nandc to chip in Read/Write helper - Update register macro name for 0x2c offset * GPMI: - Fix a double free in gpmi_nand_init * Rockchip: - Use flexible-array member instead of zero-length array * Atmel: - Update ecc_stats.corrected counter * MXC: - Remove unneeded of_match_ptr() * R852: - replace spin_lock_irqsave by spin_lock in hard IRQ * Brcmnand: - Move to polling in pio mode on oops write - Read/write oob during EDU transfer - Fix OOB R/W with Hamming ECC * FSMC: - Fix error code in fsmc_nand_probe() * OMAP: - Use ECC information from the generic structures SPI-NAND core: * Add missing MODULE_DEVICE_TABLE() SPI-NAND drivers: * gigadevice: Support GD5F1GQ5UExxG
2021-04-15Merge tag 'spi-nor/for-5.13' of ↵Richard Weinberger
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next SPI NOR core changes: - Add OTP support - Fix module unload while an op in progress - Add various cleanup patches SPI NOR controller drivers changes: - intel-spi: Move platform data header to x86 subfolder
2021-04-15Merge tag 'cfi/for-5.13' of ↵Richard Weinberger
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next CFI changes Just a couple of fixes for v5.13-rc1 * Disable broken buffered writes for CFI chips within ID 0x2201 * Address a Coverity report for unused value
2021-04-15Merge branch 'for-5.12' of ↵Mark Brown
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi into spi-5.13
2021-04-15Merge tag 'acpi-5.12-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Restore the initrd-based ACPI table override functionality broken by one of the recent fixes" * tag 'acpi-5.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: x86: Call acpi_boot_table_init() after acpi_table_upgrade()
2021-04-15Merge tag 'gpio-fixes-for-v5.12-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fix from Bartosz Golaszewski: "A single fix for an older problem with the sysfs interface: do not allow exporting GPIO lines which were marked invalid by the driver" * tag 'gpio-fixes-for-v5.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: sysfs: Obey valid_mask
2021-04-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Jiri Kosina: "The changes are all device/driver specific fixes: - EV_KEY and EV_ABS regression fix for Wacom from Ping Cheng - BIOS-specific quirk to fix some of the AMD_SFH-based systems, from Hans de Goede - other small error handling fixes and device ID additions" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: wacom: set EV_KEY and EV_ABS only for non-HID_GENERIC type of devices AMD_SFH: Add DMI quirk table for BIOS-es which don't set the activestatus bits AMD_SFH: Add sensor_mask module parameter AMD_SFH: Removed unused activecontrolstatus member from the amd_mp2_dev struct HID: wacom: Assign boolean values to a bool variable HID cp2112: fix support for multiple gpiochips HID: alps: fix error return code in alps_input_configured() HID: asus: Add support for 2021 ASUS N-Key keyboard HID: google: add don USB id
2021-04-15arm64: alternatives: Move length validation in alternative_{insn, endif}Nathan Chancellor
After commit 2decad92f473 ("arm64: mte: Ensure TIF_MTE_ASYNC_FAULT is set atomically"), LLVM's integrated assembler fails to build entry.S: <instantiation>:5:7: error: expected assembly-time absolute expression .org . - (664b-663b) + (662b-661b) ^ <instantiation>:6:7: error: expected assembly-time absolute expression .org . - (662b-661b) + (664b-663b) ^ The root cause is LLVM's assembler has a one-pass design, meaning it cannot figure out these instruction lengths when the .org directive is outside of the subsection that they are in, which was changed by the .arch_extension directive added in the above commit. Apply the same fix from commit 966a0acce2fc ("arm64/alternatives: move length validation inside the subsection") to the alternative_endif macro, shuffling the .org directives so that the length validation happen will always happen in the same subsections. alternative_insn has not shown any issue yet but it appears that it could have the same issue in the future so just preemptively change it. Fixes: f7b93d42945c ("arm64/alternatives: use subsections for replacement sequences") Cc: <stable@vger.kernel.org> # 5.8.x Link: https://github.com/ClangBuiltLinux/linux/issues/1347 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Sami Tolvanen <samitolvanen@google.com> Tested-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20210414000803.662534-1-nathan@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-04-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "Just a few driver fixes here" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elants_i2c - drop zero-checking of ABS_MT_TOUCH_MAJOR resolution Input: elants_i2c - fix division by zero if firmware reports zero phys size Input: nspire-keypad - enable interrupts only when opened Input: i8042 - fix Pegatron C15B ID entry Input: n64joy - fix return value check in n64joy_probe() Input: s6sy761 - fix coordinate read bit shift
2021-04-15PM: wakeup: use dev_set_name() directlyAndy Shevchenko
We have open coded dev_set_name() implementation, replace that with a direct call. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-15spi: spi-zynqmp-gqspi: Fix runtime PM imbalance in zynqmp_qspi_probeDinghao Liu
There is a PM usage counter decrement after zynqmp_qspi_init_hw() without any refcount increment, which leads to refcount leak.Add a refcount increment to balance the refcount. Also set auto_runtime_pm to resume suspended spi controller. Fixes: 9e3a000362aec ("spi: zynqmp: Add pm runtime support") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Tested-by: Quanyang Wang <quanyang.wang@windriver.com> Link: https://lore.kernel.org/r/20210415074644.24646-1-dinghao.liu@zju.edu.cn Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-15spi: s3c64xx: constify driver/match dataKrzysztof Kozlowski
The match data (struct s3c64xx_spi_port_config) stored in of_device_id and platform_device_id tables is not modified by the driver and can be handled entirely in a const-way to increase the code safety. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Sylwester Nawrocki <snawrocki@kernel.org> Link: https://lore.kernel.org/r/20210414203343.203119-3-krzysztof.kozlowski@canonical.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-15spi: s3c64xx: correct kerneldoc of s3c64xx_spi_port_configKrzysztof Kozlowski
Correct the name of s3c64xx_spi_port_config structure in kerneldoc: drivers/spi/spi-s3c64xx.c:154: warning: expecting prototype for struct s3c64xx_spi_info. Prototype was for struct s3c64xx_spi_port_config instead Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Sylwester Nawrocki <snawrocki@kernel.org> Link: https://lore.kernel.org/r/20210414203343.203119-2-krzysztof.kozlowski@canonical.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-15spi: s3c64xx: simplify getting of_device_id match dataKrzysztof Kozlowski
Use of_device_get_match_data() to make the code slightly smaller and to remove the of_device_id table forward declaration. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Sylwester Nawrocki <snawrocki@kernel.org> Link: https://lore.kernel.org/r/20210414203343.203119-1-krzysztof.kozlowski@canonical.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-15spi: pxa2xx: Add support for Intel Alder Lake PCH-MJarkko Nikula
Add support for LPSS SPI on Intel Alder Lake PCH-M. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Link: https://lore.kernel.org/r/20210415135917.54144-1-jarkko.nikula@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-15Merge tag 'drm-intel-fixes-2021-04-15' of ↵Daniel Vetter
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes Display panel & power related fixes: - Backlight fix (Lyude) - Display watermark fix (Ville) - VLV panel power fix (Hans) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YHg4nz/ndzDRmPjd@intel.com
2021-04-15Merge branch 'for-next/pac-set-get-enabled-keys' into for-next/coreCatalin Marinas
* for-next/pac-set-get-enabled-keys: : Introduce arm64 prctl(PR_PAC_{SET,GET}_ENABLED_KEYS). arm64: pac: Optimize kernel entry/exit key installation code paths arm64: Introduce prctl(PR_PAC_{SET,GET}_ENABLED_KEYS) arm64: mte: make the per-task SCTLR_EL1 field usable elsewhere
2021-04-15Merge branch 'for-next/mte-async-kernel-mode' into for-next/coreCatalin Marinas
* for-next/mte-async-kernel-mode: : Add MTE asynchronous kernel mode support kasan, arm64: tests supports for HW_TAGS async mode arm64: mte: Report async tag faults before suspend arm64: mte: Enable async tag check fault arm64: mte: Conditionally compile mte_enable_kernel_*() arm64: mte: Enable TCO in functions that can read beyond buffer limits kasan: Add report for async mode arm64: mte: Drop arch_enable_tagging() kasan: Add KASAN mode kernel parameter arm64: mte: Add asynchronous mode support
2021-04-15Merge branches 'for-next/misc', 'for-next/kselftest', 'for-next/xntable', ↵Catalin Marinas
'for-next/vdso', 'for-next/fiq', 'for-next/epan', 'for-next/kasan-vmalloc', 'for-next/fgt-boot-init', 'for-next/vhe-only' and 'for-next/neon-softirqs-disabled', remote-tracking branch 'arm64/for-next/perf' into for-next/core * for-next/misc: : Miscellaneous patches arm64/sve: Add compile time checks for SVE hooks in generic functions arm64/kernel/probes: Use BUG_ON instead of if condition followed by BUG. arm64/sve: Remove redundant system_supports_sve() tests arm64: mte: Remove unused mte_assign_mem_tag_range() arm64: Add __init section marker to some functions arm64/sve: Rework SVE access trap to convert state in registers docs: arm64: Fix a grammar error arm64: smp: Add missing prototype for some smp.c functions arm64: setup: name `tcr` register arm64: setup: name `mair` register arm64: stacktrace: Move start_backtrace() out of the header arm64: barrier: Remove spec_bar() macro arm64: entry: remove test_irqs_unmasked macro ARM64: enable GENERIC_FIND_FIRST_BIT arm64: defconfig: Use DEBUG_INFO_REDUCED * for-next/kselftest: : Various kselftests for arm64 kselftest: arm64: Add BTI tests kselftest/arm64: mte: Report filename on failing temp file creation kselftest/arm64: mte: Fix clang warning kselftest/arm64: mte: Makefile: Fix clang compilation kselftest/arm64: mte: Output warning about failing compiler kselftest/arm64: mte: Use cross-compiler if specified kselftest/arm64: mte: Fix MTE feature detection kselftest/arm64: mte: common: Fix write() warnings kselftest/arm64: mte: user_mem: Fix write() warning kselftest/arm64: mte: ksm_options: Fix fscanf warning kselftest/arm64: mte: Fix pthread linking kselftest/arm64: mte: Fix compilation with native compiler * for-next/xntable: : Add hierarchical XN permissions for all page tables arm64: mm: use XN table mapping attributes for user/kernel mappings arm64: mm: use XN table mapping attributes for the linear region arm64: mm: add missing P4D definitions and use them consistently * for-next/vdso: : Minor improvements to the compat vdso and sigpage arm64: compat: Poison the compat sigpage arm64: vdso: Avoid ISB after reading from cntvct_el0 arm64: compat: Allow signal page to be remapped arm64: vdso: Remove redundant calls to flush_dcache_page() arm64: vdso: Use GFP_KERNEL for allocating compat vdso and signal pages * for-next/fiq: : Support arm64 FIQ controller registration arm64: irq: allow FIQs to be handled arm64: Always keep DAIF.[IF] in sync arm64: entry: factor irq triage logic into macros arm64: irq: rework root IRQ handler registration arm64: don't use GENERIC_IRQ_MULTI_HANDLER genirq: Allow architectures to override set_handle_irq() fallback * for-next/epan: : Support for Enhanced PAN (execute-only permissions) arm64: Support execute-only permissions with Enhanced PAN * for-next/kasan-vmalloc: : Support CONFIG_KASAN_VMALLOC on arm64 arm64: Kconfig: select KASAN_VMALLOC if KANSAN_GENERIC is enabled arm64: kaslr: support randomized module area with KASAN_VMALLOC arm64: Kconfig: support CONFIG_KASAN_VMALLOC arm64: kasan: abstract _text and _end to KERNEL_START/END arm64: kasan: don't populate vmalloc area for CONFIG_KASAN_VMALLOC * for-next/fgt-boot-init: : Booting clarifications and fine grained traps setup arm64: Require that system registers at all visible ELs be initialized arm64: Disable fine grained traps on boot arm64: Document requirements for fine grained traps at boot * for-next/vhe-only: : Dealing with VHE-only CPUs (a.k.a. M1) arm64: Get rid of CONFIG_ARM64_VHE arm64: Cope with CPUs stuck in VHE mode arm64: cpufeature: Allow early filtering of feature override * arm64/for-next/perf: arm64: perf: Remove redundant initialization in perf_event.c perf/arm_pmu_platform: Clean up with dev_printk perf/arm_pmu_platform: Fix error handling perf/arm_pmu_platform: Use dev_err_probe() for IRQ errors docs: perf: Address some html build warnings docs: perf: Add new description on HiSilicon uncore PMU v2 drivers/perf: hisi: Add support for HiSilicon PA PMU driver drivers/perf: hisi: Add support for HiSilicon SLLC PMU driver drivers/perf: hisi: Update DDRC PMU for programmable counter drivers/perf: hisi: Add new functions for HHA PMU drivers/perf: hisi: Add new functions for L3C PMU drivers/perf: hisi: Add PMU version for uncore PMU drivers. drivers/perf: hisi: Refactor code for more uncore PMUs drivers/perf: hisi: Remove unnecessary check of counter index drivers/perf: Simplify the SMMUv3 PMU event attributes drivers/perf: convert sysfs sprintf family to sysfs_emit drivers/perf: convert sysfs scnprintf family to sysfs_emit_at() and sysfs_emit() drivers/perf: convert sysfs snprintf family to sysfs_emit * for-next/neon-softirqs-disabled: : Run kernel mode SIMD with softirqs disabled arm64: fpsimd: run kernel mode NEON with softirqs disabled arm64: assembler: introduce wxN aliases for wN registers arm64: assembler: remove conditional NEON yield macros
2021-04-15arm64/sve: Add compile time checks for SVE hooks in generic functionsMark Brown
The FPSIMD code was relying on IS_ENABLED() checks in system_suppors_sve() to cause the compiler to delete references to SVE functions in some places, add explicit IS_ENABLED() checks back. Fixes: ef9c5d09797d ("arm64/sve: Remove redundant system_supports_sve() tests") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210415121742.36628-1-broonie@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-04-15platform/x86: intel_chtdc_ti_pwrbtn: Fix missing IRQF_ONESHOT as only ↵Guangqing Zhu
threaded handler Coccinelle noticed: drivers/platform/x86/intel_chtdc_ti_pwrbtn.c:59:7-32: ERROR: Threaded IRQ with no primary handler requested without IRQF_ONESHOT Signed-off-by: Guangqing Zhu <zhuguangqing83@gmail.com> Link: https://lore.kernel.org/r/20210415091435.10486-1-zhuguangqing83@gmail.com Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-04-15serial: sh-sci: remove obsolete latency workaroundUlrich Hecht
Since the transition to hrtimers there is no more need to set a minimum RX timeout to work around latency issues. Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu> Link: https://lore.kernel.org/r/20210415093547.21639-1-uli+renesas@fpond.eu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-15platform/x86: gigabyte-wmi: add X570 AORUS ELITEJulian Labus
Add the X570 AORUS ELITE to gigabyte_wmi_known_working_platforms Signed-off-by: Julian Labus <julian@labus-online.de> Acked-By: Thomas Weißschuh <thomas@weissschuh.net> Link: https://lore.kernel.org/r/20210415074526.1782-1-julian@labus-online.de Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-04-15platform/x86: thinkpad_acpi: Add labels to the first 2 temperature sensorsHans de Goede
On EC version 3, the first 2 temperature sensors are always CPU and GPU add labels for these. This changes e.g. the "sensors" command output on a X1C8 from: thinkpad-isa-0000 Adapter: ISA adapter fan1: 2694 RPM temp1: +42.0°C temp2: N/A temp3: +33.0°C temp4: +0.0°C temp5: +35.0°C temp6: +42.0°C temp7: +42.0°C temp8: N/A into: thinkpad-isa-0000 Adapter: ISA adapter fan1: 2694 RPM CPU: +42.0°C GPU: N/A temp3: +33.0°C temp4: +0.0°C temp5: +35.0°C temp6: +42.0°C temp7: +42.0°C temp8: N/A Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210413072112.183550-1-hdegoede@redhat.com
2021-04-15Merge tag 'icc-5.13-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next Georgi writes: interconnect changes for 5.13 These are the interconnect changes for the 5.13-rc1 merge window with the highlights being drivers for two new platforms. Driver changes: - New driver for SM8350 platforms. - New driver for SDM660 platforms. Signed-off-by: Georgi Djakov <djakov@kernel.org> * tag 'icc-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc: interconnect: qcom: sm8350: Add missing link between nodes interconnect: qcom: sm8350: Use the correct ids interconnect: qcom: sdm660: Fix kerneldoc warning MAINTAINERS: icc: add interconnect tree interconnect: qcom: Add SM8350 interconnect provider driver dt-bindings: interconnect: Add Qualcomm SM8350 DT bindings interconnect: qcom: icc-rpm: record slave RPM id in error log interconnect: qcom: Add SDM660 interconnect provider driver dt-bindings: interconnect: Add bindings for Qualcomm SDM660 NoC
2021-04-15PM / wakeup: use dev_set_name() directlyAndy Shevchenko
We have open coded dev_set_name() implementation, replace that with a direct call. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210414125310.10900-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-15software node: Allow node addition to already existing deviceHeikki Krogerus
If the node is added to an already exiting device, the node needs to be also linked to the device separately. This will make sure the reference count is kept in balance also when the node is injected to a device afterwards. Fixes: e68d0119e328 ("software node: Introduce device_add_software_node()") Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210414075438.64547-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-15tty: clean include/linux/tty.h upGreg Kroah-Hartman
There are a lot of tty-core-only functions that are listed in include/linux/tty.h. Move them to drivers/tty/tty.h so that no one else can accidentally call them or think that they are public functions. Cc: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20210408125134.3016837-14-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-15tty: move some tty-only functions to drivers/tty/tty.hGreg Kroah-Hartman
The flow change and restricted_tty_write() logic is internal to the tty core only, so move it out of the include/linux/tty.h file. Cc: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20210408125134.3016837-12-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-15tty: make tty_release_redirect() staticGreg Kroah-Hartman
No one calls this outside of the tty_io.c file, so mark this static and do not export the symbol anymore. Cc: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20210408125134.3016837-11-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-15tty: move some internal tty lock enums and functions out of tty.hGreg Kroah-Hartman
Move the TTY_LOCK_* enums and tty_ldisc lock functions out of the global tty.h into the local header file to clean things up. Cc: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20210408125134.3016837-10-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-15tty: audit: move some local functions out of tty.hGreg Kroah-Hartman
The functions tty_audit_add_data() and tty_audit_tiocsti() are local to the tty core code, and do not need to be in a "kernel-wide" header file so move them to drivers/tty/tty.h Cc: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20210408125134.3016837-9-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-15tty: tty.h: remove tty_info()Greg Kroah-Hartman
No one is calling this macro, and no one should, so remove it from the .h file. Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20210408125134.3016837-3-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-15tty: create internal tty.h fileGreg Kroah-Hartman
There are a number of functions and #defines in include/linux/tty.h that do not belong there as they are private to the tty core code. Create an initial drivers/tty/tty.h file and copy the odd "tty logging" macros into it to seed the file with some initial things that we know nothing outside of the tty core should be calling. Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20210408125134.3016837-2-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-15tty: n_gsm: check error while registering tty devicesHillf Danton
Add the error path for registering tty devices and roll back in case of error in bid to avoid the UAF like the below one reported. Plus syzbot reported general protection fault in cdev_del() on Sep 24, 2020 and both cases are down to the kobject_put() in tty_cdev_add(). ------------[ cut here ]------------ refcount_t: underflow; use-after-free. WARNING: CPU: 1 PID: 8923 at lib/refcount.c:28 refcount_warn_saturate+0x1cf/0x210 -origin/lib/refcount.c:28 Modules linked in: CPU: 1 PID: 8923 Comm: executor Not tainted 5.12.0-rc5+ #8 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:refcount_warn_saturate+0x1cf/0x210 -origin/lib/refcount.c:28 Code: 4f ff ff ff e8 32 fa b5 fe 48 c7 c7 3d f8 f6 86 e8 d6 ab c6 fe c6 05 7c 34 67 04 01 48 c7 c7 68 f8 6d 86 31 c0 e8 81 2e 9d fe <0f> 0b e9 22 ff ff ff e8 05 fa b5 fe 48 c7 c7 3e f8 f6 86 e8 a9 ab RSP: 0018:ffffc90001633c60 EFLAGS: 00010246 RAX: 15d08b2e34b77800 RBX: 0000000000000003 RCX: ffff88804c056c80 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000003 R08: ffffffff813767aa R09: 0001ffffffffffff R10: 0001ffffffffffff R11: ffff88804c056c80 R12: ffff888040b7d000 R13: ffff88804c206938 R14: ffff88804c206900 R15: ffff888041b18488 FS: 00000000022c9940(0000) GS:ffff88807ec00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f9f9b122008 CR3: 0000000044b4b000 CR4: 0000000000750ee0 PKRU: 55555554 Call Trace: __refcount_sub_and_test -origin/./include/linux/refcount.h:283 [inline] __refcount_dec_and_test -origin/./include/linux/refcount.h:315 [inline] refcount_dec_and_test -origin/./include/linux/refcount.h:333 [inline] kref_put -origin/./include/linux/kref.h:64 [inline] kobject_put+0x17b/0x180 -origin/lib/kobject.c:753 cdev_del+0x4b/0x50 -origin/fs/char_dev.c:597 tty_unregister_device+0x99/0xd0 -origin/drivers/tty/tty_io.c:3343 gsmld_detach_gsm -origin/drivers/tty/n_gsm.c:2409 [inline] gsmld_close+0x6c/0x140 -origin/drivers/tty/n_gsm.c:2478 tty_ldisc_close -origin/drivers/tty/tty_ldisc.c:488 [inline] tty_ldisc_kill -origin/drivers/tty/tty_ldisc.c:636 [inline] tty_ldisc_release+0x1b6/0x400 -origin/drivers/tty/tty_ldisc.c:809 tty_release_struct+0x19/0xb0 -origin/drivers/tty/tty_io.c:1714 tty_release+0x9ad/0xa00 -origin/drivers/tty/tty_io.c:1885 __fput+0x260/0x4e0 -origin/fs/file_table.c:280 ____fput+0x11/0x20 -origin/fs/file_table.c:313 task_work_run+0x8e/0x110 -origin/kernel/task_work.c:140 tracehook_notify_resume -origin/./include/linux/tracehook.h:189 [inline] exit_to_user_mode_loop -origin/kernel/entry/common.c:174 [inline] exit_to_user_mode_prepare+0x16b/0x1a0 -origin/kernel/entry/common.c:208 __syscall_exit_to_user_mode_work -origin/kernel/entry/common.c:290 [inline] syscall_exit_to_user_mode+0x20/0x40 -origin/kernel/entry/common.c:301 do_syscall_64+0x45/0x80 -origin/arch/x86/entry/common.c:56 entry_SYSCALL_64_after_hwframe+0x44/0xae Reported-by: syzbot+c49fe6089f295a05e6f8@syzkaller.appspotmail.com Reported-and-tested-by: Hao Sun <sunhao.th@gmail.com> Signed-off-by: Hillf Danton <hdanton@sina.com> Link: https://lore.kernel.org/r/20210412035758.1974-1-hdanton@sina.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-15dt-bindings: serial: 8250: add aspeed, lpc-io-reg and aspeed, lpc-interruptsZev Weiss
These correspond to the existing lpc_address, sirq, and sirq_polarity sysfs attributes; the second element of aspeed,lpc-interrupts provides a replacement for the deprecated aspeed,sirq-polarity-sense property. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Link: https://lore.kernel.org/r/20210412034712.16778-5-zev@bewilderbeest.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-14 04:28:25 +0000