summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-04-13staging: vc04_services: TODO: remove trailing whitespaceMitali Borkar
Removed trailing whitespace to adhere to linux kernel coding style. Reported by checkpatch. Signed-off-by: Mitali Borkar <mitaliborkar810@gmail.com> Link: https://lore.kernel.org/r/5a54a06bae846f1f037165c0c7ba7ffe5a55a4a8.1618223171.git.mitaliborkar810@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-13platform/x86: intel_pmc_core: export platform global reset bits via etr3 ↵Tamar Mashiah
sysfs file During PCH (platform/board) manufacturing process a global platform reset has to be induced in order for the configuration changes take the effect upon following platform reset. This is an internal platform state and is not intended to be used in the regular platform resets. The setting is exposed via ETR3 (Extended Test Mode Register 3). After the manufacturing process is completed the register cannot be written anymore and is hardware locked. This setting was commonly done by accessing PMC registers via /dev/mem but due to security concerns /dev/mem access is much more restricted, hence the reason for exposing this setting via the dedicated sysfs interface. To prevent post manufacturing abuse the register is protected by hardware locking and the file is set to read-only mode via is_visible handler. The register in MMIO space is defined for Cannon Lake and newer PCHs. Cc: Hans de Goede <hdegoede@redhat.com> Cc: David E Box <david.e.box@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Tamar Mashiah <tamar.mashiah@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20210411141532.3004893-1-tomas.winkler@intel.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-04-13platform/x86: thinkpad_acpi: Correct thermal sensor allocationMark Pearson
On recent Thinkpad platforms it was reported that temp sensor 11 was always incorrectly displaying 66C. It turns out the reason for this is that this location in EC RAM is not a temperature sensor but is the power supply ID (offset 0xC2). Based on feedback from the Lenovo firmware team the EC RAM version can be determined and for the current version (3) only the 0x78 to 0x7F range is used for temp sensors. I don't have any details for earlier versions so I have left the implementation unaltered there. Note - in this block only 0x78 and 0x79 are officially designated (CPU & GPU sensors). The use of the other locations in the block will vary from platform to platform; but the existing logic to detect a sensor presence holds. Signed-off-by: Mark Pearson <markpearson@lenovo.com> Link: https://lore.kernel.org/r/20210407212015.298222-1-markpearson@lenovo.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-04-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Fix NAT IPv6 offload in the flowtable. 2) icmpv6 is printed as unknown in /proc/net/nf_conntrack. 3) Use div64_u64() in nft_limit, from Eric Dumazet. 4) Use pre_exit to unregister ebtables and arptables hooks, from Florian Westphal. 5) Fix out-of-bound memset in x_tables compat match/target, also from Florian. 6) Clone set elements expression to ensure proper initialization. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-13netfilter: nftables: clone set element expression templatePablo Neira Ayuso
memcpy() breaks when using connlimit in set elements. Use nft_expr_clone() to initialize the connlimit expression list, otherwise connlimit garbage collector crashes when walking on the list head copy. [ 493.064656] Workqueue: events_power_efficient nft_rhash_gc [nf_tables] [ 493.064685] RIP: 0010:find_or_evict+0x5a/0x90 [nf_conncount] [ 493.064694] Code: 2b 43 40 83 f8 01 77 0d 48 c7 c0 f5 ff ff ff 44 39 63 3c 75 df 83 6d 18 01 48 8b 43 08 48 89 de 48 8b 13 48 8b 3d ee 2f 00 00 <48> 89 42 08 48 89 10 48 b8 00 01 00 00 00 00 ad de 48 89 03 48 83 [ 493.064699] RSP: 0018:ffffc90000417dc0 EFLAGS: 00010297 [ 493.064704] RAX: 0000000000000000 RBX: ffff888134f38410 RCX: 0000000000000000 [ 493.064708] RDX: 0000000000000000 RSI: ffff888134f38410 RDI: ffff888100060cc0 [ 493.064711] RBP: ffff88812ce594a8 R08: ffff888134f38438 R09: 00000000ebb9025c [ 493.064714] R10: ffffffff8219f838 R11: 0000000000000017 R12: 0000000000000001 [ 493.064718] R13: ffffffff82146740 R14: ffff888134f38410 R15: 0000000000000000 [ 493.064721] FS: 0000000000000000(0000) GS:ffff88840e440000(0000) knlGS:0000000000000000 [ 493.064725] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 493.064729] CR2: 0000000000000008 CR3: 00000001330aa002 CR4: 00000000001706e0 [ 493.064733] Call Trace: [ 493.064737] nf_conncount_gc_list+0x8f/0x150 [nf_conncount] [ 493.064746] nft_rhash_gc+0x106/0x390 [nf_tables] Reported-by: Laura Garcia Liebana <nevola@gmail.com> Fixes: 409444522976 ("netfilter: nf_tables: add elements with stateful expressions") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-04-13netfilter: x_tables: fix compat match/target pad out-of-bound writeFlorian Westphal
xt_compat_match/target_from_user doesn't check that zeroing the area to start of next rule won't write past end of allocated ruleset blob. Remove this code and zero the entire blob beforehand. Reported-by: syzbot+cfc0247ac173f597aaaa@syzkaller.appspotmail.com Reported-by: Andy Nguyen <theflow@google.com> Fixes: 9fa492cdc160c ("[NETFILTER]: x_tables: simplify compat API") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-04-12ethtool: fix kdoc attr nameJakub Kicinski
Add missing 't' in attrtype. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-12net: phy: marvell: fix detection of PHY on Topaz switchesPali Rohár
Since commit fee2d546414d ("net: phy: marvell: mv88e6390 temperature sensor reading"), Linux reports the temperature of Topaz hwmon as constant -75°C. This is because switches from the Topaz family (88E6141 / 88E6341) have the address of the temperature sensor register different from Peridot. This address is instead compatible with 88E1510 PHYs, as was used for Topaz before the above mentioned commit. Create a new mapping table between switch family and PHY ID for families which don't have a model number. And define PHY IDs for Topaz and Peridot families. Create a new PHY ID and a new PHY driver for Topaz's internal PHY. The only difference from Peridot's PHY driver is the HWMON probing method. Prior this change Topaz's internal PHY is detected by kernel as: PHY [...] driver [Marvell 88E6390] (irq=63) And afterwards as: PHY [...] driver [Marvell 88E6341 Family] (irq=63) Signed-off-by: Pali Rohár <pali@kernel.org> BugLink: https://github.com/globalscaletechnologies/linux/issues/1 Fixes: fee2d546414d ("net: phy: marvell: mv88e6390 temperature sensor reading") Reviewed-by: Marek Behún <kabel@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-12Merge series "Minor updates for hisi-sfc-v3xx" from Yicong Yang ↵Mark Brown
<yangyicong@hisilicon.com>: This series fix a potential interrupt race condition and cleanup the ACPI protection for the driver. Change since v1: - reword the commit in patch #2 Link: https://lore.kernel.org/linux-spi/1617881505-51552-1-git-send-email-yangyicong@hisilicon.com/ Yicong Yang (2): spi: hisi-sfc-v3xx: fix potential irq race condition spi: hisi-sfc-v3xx: drop unnecessary ACPI_PTR and related ifendif protection drivers/spi/spi-hisi-sfc-v3xx.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) -- 2.8.1
2021-04-12x86/sgx: Mark sgx_vepc_vm_ops staticWei Yongjun
Fix the following sparse warning: arch/x86/kernel/cpu/sgx/virt.c:95:35: warning: symbol 'sgx_vepc_vm_ops' was not declared. Should it be static? This symbol is not used outside of virt.c so mark it static. [ bp: Massage commit message. ] Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20210412160023.193850-1-weiyongjun1@huawei.com
2021-04-12ACPI: scan: Utilize match_string() APIAndy Shevchenko
We have already an API to match a string in the array of strings. Utilize it instead of open coded analogues. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-12dmaengine: idxd: fix wq cleanup of WQCFG registersDave Jiang
A pre-release silicon erratum workaround where wq reset does not clear WQCFG registers was leaked into upstream code. Use wq reset command instead of blasting the MMIO region. This also address an issue where we clobber registers in future devices. Fixes: da32b28c95a7 ("dmaengine: idxd: cleanup workqueue config after disabling") Reported-by: Shreenivaas Devarajan <shreenivaas.devarajan@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/161824330020.881560.16375921906426627033.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-04-12dmaengine: idxd: clear MSIX permission entry on shutdownDave Jiang
Add disabling/clearing of MSIX permission entries on device shutdown to mirror the enabling of the MSIX entries on probe. Current code left the MSIX enabled and the pasid entries still programmed at device shutdown. Fixes: 8e50d392652f ("dmaengine: idxd: Add shared workqueue support") Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/161824457969.882533.6020239898682672311.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-04-12spi: spi-zynqmp-gqspi: Fix missing unlock on error in zynqmp_qspi_exec_op()Wei Yongjun
Add the missing unlock before return from function zynqmp_qspi_exec_op() in the error handling case. Fixes: a0f65be6e880 ("spi: spi-zynqmp-gqspi: add mutex locking for exec_op") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20210412160025.194171-1-weiyongjun1@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-12spi: hisi-sfc-v3xx: drop unnecessary ACPI_PTR and related ifendif protectionYicong Yang
We use ACPI_PTR() and related ifendif protection for the id table. This is unnecessary as the struct acpi_device_id is defined in mod_devicetable.h and doesn't rely on ACPI. The driver doesn't use any ACPI apis, so it can be compiled in the ACPI=n case with no warnings. So remove the ACPI_PTR and related ifendif protection, also replace the header acpi.h with mod_devicetable.h. Acked-by: John Garry <john.garry@huawei.com> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Link: https://lore.kernel.org/r/1618228708-37949-3-git-send-email-yangyicong@hisilicon.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-12spi: hisi-sfc-v3xx: fix potential irq race conditionYicong Yang
We mask the irq when the command completion is timeout. This won't stop the already running irq handler. Use sychronize_irq() after we mask the irq, to make sure there is no running handler. Acked-by: John Garry <john.garry@huawei.com> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Link: https://lore.kernel.org/r/1618228708-37949-2-git-send-email-yangyicong@hisilicon.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-12Merge tag 'm68knommu-for-v5.12-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu Pull m68knommu fix from Greg Ungerer: "Some m68k platforms with a non-zero memory base fail to boot with the recent flatmem changes. This is a single regression fix to the pfn offset for that case" * tag 'm68knommu-for-v5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: fix flatmem memory model setup
2021-04-12Merge tag 'usb-v5.13-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-next Peter writes: Several Cadence3 improvements are introduced in v5.13-rc1: - Add recovery during resume if the controller was lost power at system suspend - Reduce DMA memory footprint - Other small improvements * tag 'usb-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb: usb: cdnsp: Fixes issue with Configure Endpoint command usb: cdnsp: remove redundant initialization of variable ret usb: cdns3: delete repeated clear operations usb: cdns3: Optimize DMA request buffer allocation usb: cdns3: Use dma_pool_* api to alloc trb pool usb: cdns3: fix static checker warning. usb: cdns3: imx: mark cdns_imx_system_resume as __maybe_unused usb: cdns3: trace: delete the trace parameter for request->trb usb: cdns3: imx: add power lost support for system resume usb: cdns3: add power lost support for system resume
2021-04-12ARM: dts: at91: sama5d2/trivial: fix letter case for etm hex addressNicolas Ferre
Fix the etm node hex address to lower case for matching regexp specification and removing the additional warning that looks like: arch/arm/boot/dts/at91-sama5d2_ptc_ek.dt.yaml: /: 'etm@73C000' does not match any of the regexes: '@(0|[1-9a-f][0-9a-f]*)$', '^[^@]+$', 'pinctrl-[0-9]+' Reported-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-12Merge branch 'opp/linux-next' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull OPP (Operating Performance Points) framework updates for v5.13 from Viresh Kumar: "This adds devm variants for OPP APIs and updates few of the users as well (Yangtao Li and Dmitry Osipenko)." * 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: memory: samsung: exynos5422-dmc: Convert to use resource-managed OPP API drm/panfrost: Convert to use resource-managed OPP API drm/lima: Convert to use resource-managed OPP API mmc: sdhci-msm: Convert to use resource-managed OPP API spi: spi-qcom-qspi: Convert to use resource-managed OPP API spi: spi-geni-qcom: Convert to use resource-managed OPP API serial: qcom_geni_serial: Convert to use resource-managed OPP API opp: Change return type of devm_pm_opp_attach_genpd() opp: Change return type of devm_pm_opp_register_set_opp_helper() opp: Add devres wrapper for dev_pm_opp_of_add_table opp: Add devres wrapper for dev_pm_opp_set_supported_hw opp: Add devres wrapper for dev_pm_opp_set_regulators opp: Add devres wrapper for dev_pm_opp_set_clkname
2021-04-12Merge branch 'cpufreq/arm/linux-next' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull ARM cpufreq updates for v5.13 from Viresh Kumar: "- Fix typos in s5pv210 cpufreq driver (Bhaskar Chowdhury). - Armada 37xx: Fix cpufreq changing base CPU speed to 800 MHz from 1000 MHz (Pali Rohár and Marek Behún). - cpufreq-dt: Return -EPROBE_DEFER on failure to add table (Quanyang Wang). - Minor cleanup in cppc driver (Tom Saeger). - Add frequency invariance support for CPPC driver and generalize freq invariance support arch-topology driver (Viresh Kumar)." * 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: cpufreq: armada-37xx: Fix module unloading cpufreq: armada-37xx: Remove cur_frequency variable cpufreq: armada-37xx: Fix determining base CPU frequency cpufreq: armada-37xx: Fix driver cleanup when registration failed clk: mvebu: armada-37xx-periph: Fix workaround for switching from L1 to L0 clk: mvebu: armada-37xx-periph: Fix switching CPU freq from 250 Mhz to 1 GHz cpufreq: armada-37xx: Fix the AVS value for load L1 clk: mvebu: armada-37xx-periph: remove .set_parent method for CPU PM clock cpufreq: armada-37xx: Fix setting TBG parent for load levels cpufreq: dt: dev_pm_opp_of_cpumask_add_table() may return -EPROBE_DEFER cpufreq: cppc: simplify default delay_us setting cpufreq: Rudimentary typos fix in the file s5pv210-cpufreq.c cpufreq: CPPC: Add support for frequency invariance arch_topology: Export arch_freq_scale and helpers arch_topology: Allow multiple entities to provide sched_freq_tick() callback arch_topology: Rename freq_scale as arch_freq_scale
2021-04-12arm64: mte: Ensure TIF_MTE_ASYNC_FAULT is set atomicallyCatalin Marinas
The entry from EL0 code checks the TFSRE0_EL1 register for any asynchronous tag check faults in user space and sets the TIF_MTE_ASYNC_FAULT flag. This is not done atomically, potentially racing with another CPU calling set_tsk_thread_flag(). Replace the non-atomic ORR+STR with an STSET instruction. While STSET requires ARMv8.1 and an assembler that understands LSE atomics, the MTE feature is part of ARMv8.5 and already requires an updated assembler. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Fixes: 637ec831ea4f ("arm64: mte: Handle synchronous and asynchronous tag check faults") Cc: <stable@vger.kernel.org> # 5.10.x Reported-by: Will Deacon <will@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20210409173710.18582-1-catalin.marinas@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2021-04-12Revert "usb: Link the ports to the connectors they are attached to"Greg Kroah-Hartman
This reverts commit 63cd78617350dae99cc5fbd8f643b83ee819fe33 as it causes a build error: depmod: ERROR: Cycle detected: usbcore -> typec -> usbcore depmod: ERROR: Found 2 modules in dependency cycles! Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Link: https://lore.kernel.org/r/20210412213655.3776e15e@canb.auug.org.au Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-12usb: cdnsp: Fixes issue with Configure Endpoint commandPawel Laszczak
Patch adds flag EP_UNCONFIGURED to detect whether endpoint was unconfigured. This flag is set in cdnsp_reset_device after Reset Device command. Among others this command disables all non control endpoints. Flag is used in cdnsp_gadget_ep_disable to protect controller against invoking Configure Endpoint command on disabled endpoint. Lack of this protection in some cases caused that Configure Endpoint command completed with Context State Error code completion. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Peter Chen <peter.chen@kernel.org>
2021-04-12usb: cdnsp: remove redundant initialization of variable retColin Ian King
The variable ret is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Peter Chen <peter.chen@kernel.org>
2021-04-12usb: cdns3: delete repeated clear operationsWang Qing
dma_alloc_coherent already zeroes out memory, so memset is not needed. Signed-off-by: Wang Qing <wangqing@vivo.com> Reviewed-by: Pawel Laszczak <pawell@cadence.com> Acked-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Peter Chen <peter.chen@kernel.org>
2021-04-12usb: cdns3: Optimize DMA request buffer allocationSanket Parmar
dma_alloc_coherent() might fail on the platform with a small DMA region. To avoid such failure in cdns3_prepare_aligned_request_buf(), dma_alloc_coherent() is replaced with dma_alloc_noncoherent() to allocate aligned request buffer of dynamic length. Reported-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Sanket Parmar <sparmar@cadence.com> Signed-off-by: Peter Chen <peter.chen@kernel.org>
2021-04-12usb: cdns3: Use dma_pool_* api to alloc trb poolSanket Parmar
Allocation of DMA coherent memory in atomic context using dma_alloc_coherent() might fail on platforms with smaller DMA region. To fix it, dma_alloc_coherent() is replaced with dma_pool API to allocate a smaller chunk of DMA coherent memory for TRB rings. Reported-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Sanket Parmar <sparmar@cadence.com> Signed-off-by: Peter Chen <peter.chen@kernel.org>
2021-04-12usb: cdns3: fix static checker warning.Frank Li
The patch c450e48eb570: "usb: cdns3: add power lost support for system resume" from Feb 18, 2021, leads to the following static checker warning: drivers/usb/cdns3/core.c:551 cdns_resume() error: uninitialized symbol 'ret'. drivers/usb/cdns3/core.c 544 545 if (!role_changed) { 546 if (cdns->role == USB_ROLE_HOST) 547 ret = cdns_drd_host_on(cdns); 548 else if (cdns->role == USB_ROLE_DEVICE) 549 ret = cdns_drd_gadget_on(cdns); "ret" is uninitialized at else branch. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Frank Li <frank.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@kernel.org>
2021-04-12usb: cdns3: imx: mark cdns_imx_system_resume as __maybe_unusedWei Yongjun
The function cdns_imx_system_resume() may have no callers depending on configuration, so it must be marked __maybe_unused to avoid harmless warning: drivers/usb/cdns3/cdns3-imx.c:378:12: warning: 'cdns_imx_system_resume' defined but not used [-Wunused-function] 378 | static int cdns_imx_system_resume(struct device *dev) | ^~~~~~~~~~~~~~~~~~~~~~ Fixes: 67982dfa59de ("usb: cdns3: imx: add power lost support for system resume") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Peter Chen <peter.chen@kernel.org>
2021-04-12usb: cdns3: trace: delete the trace parameter for request->trbPeter Chen
It is not correct using %pa to print virtual address of request->trb, and it is hard to print its physical address due to the virtual address is zero before using. It could use index (start_trb/end_trb) to know the current trb position, so no matter virtual address or physical address for request-trb is not so meaningful. Reported-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Peter Chen <peter.chen@kernel.org>
2021-04-12usb: cdns3: imx: add power lost support for system resumeFrank Li
imx need special handle when controller lost power Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Frank Li <frank.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@kernel.org>
2021-04-12usb: cdns3: add power lost support for system resumeFrank Li
If the controller lost its power during the system suspend, we need to do all initialiation operations. Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Frank Li <frank.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@kernel.org>
2021-04-12drm/i915/display/vlv_dsi: Do not skip panel_pwr_cycle_delay when disabling ↵Hans de Goede
the panel After the recently added commit fe0f1e3bfdfe ("drm/i915: Shut down displays gracefully on reboot"), the DSI panel on a Cherry Trail based Predia Basic tablet would no longer properly light up after reboot. I've managed to reproduce this without rebooting by doing: chvt 3; echo 1 > /sys/class/graphics/fb0/blank;\ echo 0 > /sys/class/graphics/fb0/blank Which rapidly turns the panel off and back on again. The vlv_dsi.c code uses an intel_dsi_msleep() helper for the various delays used for panel on/off, since starting with MIPI-sequences version >= 3 the delays are already included inside the MIPI-sequences. The problems exposed by the "Shut down displays gracefully on reboot" change, show that using this helper for the panel_pwr_cycle_delay is not the right thing to do. This has not been noticed until now because normally the panel never is cycled off and directly on again in quick succession. Change the msleep for the panel_pwr_cycle_delay to a normal msleep() call to avoid the panel staying black after a quick off + on cycle. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Fixes: fe0f1e3bfdfe ("drm/i915: Shut down displays gracefully on reboot") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210325114823.44922-1-hdegoede@redhat.com (cherry picked from commit 2878b29fc25a0dac0e1c6c94177f07c7f94240f0) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2021-04-12drm/i915: Don't zero out the Y plane's watermarksVille Syrjälä
Don't zero out the watermarks for the Y plane since we've already computed them when computing the UV plane's watermarks (since the UV plane always appears before ethe Y plane when iterating through the planes). This leads to allocating no DDB for the Y plane since .min_ddb_alloc also gets zeroed. And that of course leads to underruns when scanning out planar formats. Cc: stable@vger.kernel.org Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Fixes: dbf71381d733 ("drm/i915: Nuke intel_atomic_crtc_state_for_each_plane_state() from skl+ wm code") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210327005945.4929-1-ville.syrjala@linux.intel.com Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> (cherry picked from commit f99b805fb9413ff007ca0b6add871737664117dd) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2021-04-12drm/i915/dpcd_bl: Don't try vesa interface unless specified by VBTLyude Paul
Looks like that there actually are another subset of laptops on the market that don't support the Intel HDR backlight interface, but do advertise support for the VESA DPCD backlight interface despite the fact it doesn't seem to work. Note though I'm not entirely clear on this - on one of the machines where this issue was observed, I also noticed that we appeared to be rejecting the VBT defined backlight frequency in intel_dp_aux_vesa_calc_max_backlight(). It's noted in this function that: /* Use highest possible value of Pn for more granularity of brightness * adjustment while satifying the conditions below. * ... * - FxP is within 25% of desired value. * Note: 25% is arbitrary value and may need some tweak. */ So it's possible that this value might just need to be tweaked, but for now let's just disable the VESA backlight interface unless it's specified in the VBT just to be safe. We might be able to try enabling this again by default in the future. Fixes: 2227816e647a ("drm/i915/dp: Allow forcing specific interfaces through enable_dpcd_backlight") Cc: Jani Nikula <jani.nikula@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Bugzilla: https://gitlab.freedesktop.org/drm/intel/-/issues/3169 Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210318170204.513000-1-lyude@redhat.com (cherry picked from commit 9e2eb6d5380e9dadcd2baecb51f238e5eba94bee) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2021-04-12x86/asm: Ensure asm/proto.h can be included stand-aloneJan Kiszka
Fix: ../arch/x86/include/asm/proto.h:14:30: warning: ‘struct task_struct’ declared \ inside parameter list will not be visible outside of this definition or declaration long do_arch_prctl_64(struct task_struct *task, int option, unsigned long arg2); ^~~~~~~~~~~ .../arch/x86/include/asm/proto.h:40:34: warning: ‘struct task_struct’ declared \ inside parameter list will not be visible outside of this definition or declaration long do_arch_prctl_common(struct task_struct *task, int option, ^~~~~~~~~~~ if linux/sched.h hasn't be included previously. This fixes a build error when this header is used outside of the kernel tree. [ bp: Massage commit message. ] Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/b76b4be3-cf66-f6b2-9a6c-3e7ef54f9845@web.de
2021-04-12arm64: fpsimd: run kernel mode NEON with softirqs disabledArd Biesheuvel
Kernel mode NEON can be used in task or softirq context, but only in a non-nesting manner, i.e., softirq context is only permitted if the interrupt was not taken at a point where the kernel was using the NEON in task context. This means all users of kernel mode NEON have to be aware of this limitation, and either need to provide scalar fallbacks that may be much slower (up to 20x for AES instructions) and potentially less safe, or use an asynchronous interface that defers processing to a later time when the NEON is guaranteed to be available. Given that grabbing and releasing the NEON is cheap, we can relax this restriction, by increasing the granularity of kernel mode NEON code, and always disabling softirq processing while the NEON is being used in task context. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20210302090118.30666-4-ardb@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-04-12arm64: assembler: introduce wxN aliases for wN registersArd Biesheuvel
The AArch64 asm syntax has this slightly tedious property that the names used in mnemonics to refer to registers depend on whether the opcode in question targets the entire 64-bits (xN), or only the least significant 8, 16 or 32 bits (wN). When writing parameterized code such as macros, this can be annoying, as macro arguments don't lend themselves to indexed lookups, and so generating a reference to wN in a macro that receives xN as an argument is problematic. For instance, an upcoming patch that modifies the implementation of the cond_yield macro to be able to refer to 32-bit registers would need to modify invocations such as cond_yield 3f, x8 to cond_yield 3f, 8 so that the second argument can be token pasted after x or w to emit the correct register reference. Unfortunately, this interferes with the self documenting nature of the first example, where the second argument is obviously a register, whereas in the second example, one would need to go and look at the code to find out what '8' means. So let's fix this by defining wxN aliases for all xN registers, which resolve to the 32-bit alias of each respective 64-bit register. This allows the macro implementation to paste the xN reference after a w to obtain the correct register name. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20210302090118.30666-3-ardb@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-04-12arm64: assembler: remove conditional NEON yield macrosArd Biesheuvel
The users of the conditional NEON yield macros have all been switched to the simplified cond_yield macro, and so the NEON specific ones can be removed. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20210302090118.30666-2-ardb@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-04-12s390/entry: save the caller of psw_idleVasily Gorbik
Currently psw_idle does not allocate a stack frame and does not save its r14 and r15 into the save area. Even though this is valid from call ABI point of view, because psw_idle does not make any calls explicitly, in reality psw_idle is an entry point for controlled transition into serving interrupts. So, in practice, psw_idle stack frame is analyzed during stack unwinding. Depending on build options that r14 slot in the save area of psw_idle might either contain a value saved by previous sibling call or complete garbage. [task 0000038000003c28] do_ext_irq+0xd6/0x160 [task 0000038000003c78] ext_int_handler+0xba/0xe8 [task *0000038000003dd8] psw_idle_exit+0x0/0x8 <-- pt_regs ([task 0000038000003dd8] 0x0) [task 0000038000003e10] default_idle_call+0x42/0x148 [task 0000038000003e30] do_idle+0xce/0x160 [task 0000038000003e70] cpu_startup_entry+0x36/0x40 [task 0000038000003ea0] arch_call_rest_init+0x76/0x80 So, to make a stacktrace nicer and actually point for the real caller of psw_idle in this frequently occurring case, make psw_idle save its r14. [task 0000038000003c28] do_ext_irq+0xd6/0x160 [task 0000038000003c78] ext_int_handler+0xba/0xe8 [task *0000038000003dd8] psw_idle_exit+0x0/0x6 <-- pt_regs ([task 0000038000003dd8] arch_cpu_idle+0x3c/0xd0) [task 0000038000003e10] default_idle_call+0x42/0x148 [task 0000038000003e30] do_idle+0xce/0x160 [task 0000038000003e70] cpu_startup_entry+0x36/0x40 [task 0000038000003ea0] arch_call_rest_init+0x76/0x80 Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-04-12s390/entry: avoid setting up backchain in ext|io handlersVasily Gorbik
Currently when interrupt arrives to cpu while in kernel context INT_HANDLER macro (used for ext_int_handler and io_int_handler) allocates new stack frame and pt_regs on the kernel stack and sets up the backchain to jump over the pt_regs to the frame which has been interrupted. This is not ideal to two reasons: 1. This hides the fact that kernel stack contains interrupt frame in it and hence breaks arch_stack_walk_reliable(), which needs to know that to guarantee "reliability" and checks that there are no pt_regs on the way. 2. It breaks the backchain unwinder logic, which assumes that the next stack frame after an interrupt frame is reliable, while it is not. In some cases (when r14 contains garbage) this leads to early unwinding termination with an error, instead of marking frame as unreliable and continuing. To address that, only set backchain to 0. Fixes: 56e62a737028 ("s390: convert to generic entry") Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-04-12USB: serial: cp210x: add gpio-configuration debug printkJohan Hovold
Add a debug printk to dump the GPIO configuration stored in EEPROM during probe. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-12USB: serial: cp210x: provide gpio valid maskJohan Hovold
Use the new GPIO valid-mask feature to inform gpiolib which pins are available for use instead of handling that in a request callback. This also allows user space to figure out which pins are available through the chardev interface without having to request each pin in turn. Note that the return value when requesting an unavailable pin will now be -EINVAL instead of -ENODEV. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-04-12m68k: Add missing mmap_read_lock() to sys_cacheflush()Liam Howlett
When the superuser flushes the entire cache, the mmap_read_lock() is not taken, but mmap_read_unlock() is called. Add the missing mmap_read_lock() call. Fixes: cd2567b6850b1648 ("m68k: call find_vma with the mmap_sem held in sys_cacheflush()") Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Link: https://lore.kernel.org/r/20210407200032.764445-1-Liam.Howlett@Oracle.com Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2021-04-12dmaengine: plx_dma: add a missing put_device() on error pathDan Carpenter
Add a missing put_device(&pdev->dev) if the call to dma_async_device_register(dma); fails. Fixes: 905ca51e63be ("dmaengine: plx-dma: Introduce PLX DMA engine PCI driver skeleton") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Link: https://lore.kernel.org/r/YFnq/0IQzixtAbC1@mwanda Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-04-12staging: vchiq_core: split exit conditionsStefan Wahren
Some exit conditions are rather complex. So better split them up. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/1618164700-21150-11-git-send-email-stefan.wahren@i2se.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-12staging: vchiq_core: fix if alignmentsStefan Wahren
This fixes the alignment of some if statements. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/1618164700-21150-10-git-send-email-stefan.wahren@i2se.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-12staging: vchiq_core: introduce SLOT_QUEUE_INDEX_FROM_POS_MASKEDStefan Wahren
Define a macro which already masked the result of SLOT_QUEUE_INDEX_FROM_POS. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/1618164700-21150-9-git-send-email-stefan.wahren@i2se.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-12staging: vchiq_core: use BITSET_WORD macroStefan Wahren
Use this macro to make the index retrieval less opaque. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/1618164700-21150-8-git-send-email-stefan.wahren@i2se.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-15 03:41:14 +0000