Age | Commit message (Collapse) | Author |
|
Storing the index for poll services in a local var will increase the
readability of the second loop. Also we get the rid off the checkpatch
issue about the line ending with a square bracket.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1618164700-21150-7-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In case there is no service pointer provided, we can skip these polling.
Use a goto to reduce the indentation, which is necessary for the following
patches. Btw fix the brace alignment of the loops.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1618164700-21150-6-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Exit early allow us to reduce the indention in vchiq_open_service_internal()
and vchiq_set_service_option(). Btw we can avoid the multi-line assignments
of quota.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1618164700-21150-5-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Additional curly braces around cases are a bit harder to read. So
change the scope of service quota to get the rid off those braces.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1618164700-21150-4-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Readibility and following clean-ups will benefit from the shorter name.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1618164700-21150-3-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is no need for variable status. So drop it and improve readability.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1618164700-21150-2-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
pm_runtime_get_sync() will increase the runtime PM counter
even it returns an error. Thus a pairing decrement is needed
to prevent refcount leak. Fix this by replacing this API with
pm_runtime_resume_and_get(), which will not change the runtime
PM counter on error.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210409082805.23643-1-dinghao.liu@zju.edu.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Removed unnecessary ftrace-like logging by simply deleting that statement
as we have other modes of logging like ftrace.
Reported by checkpatch.
Signed-off-by: Mitali Borkar <mitaliborkar810@gmail.com>
Link: https://lore.kernel.org/r/YHMy457UGosfeaC0@kali
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
fix following W=1 compiler issue:
drivers/staging/rtl8723bs/hal/sdio_halinit.c:
In function '_ReadAdapterInfo8723BS':
drivers/staging/rtl8723bs/hal/sdio_halinit.c:1156:16:
warning: variable 'start' set but not used [-Wunused-but-set-variable]
1156 | unsigned long start;
| ^~~~~
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Link: https://lore.kernel.org/r/ce1faa15052b519738656e11658dee93f9e91c29.1618145345.git.fabioaiuto83@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The next instruction for both 'goto exit' jump statements is to
execute the exit jump instructions regardless. We can safely
remove all jump statements from __init rtw_drv_entry()
Signed-off-by: Bryan Brattlof <hello@bryanbrattlof.com>
Link: https://lore.kernel.org/r/20210411133625.38195-1-hello@bryanbrattlof.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This backslash should be deleted - looks like leftover and not needed.
Signed-off-by: Dmitrii Wolf <dev.dragon@bk.ru>
Link: https://lore.kernel.org/r/20210411120301.6549-1-dev.dragon@bk.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Change controlling expressions within 'if' statements: don't compare
with 'true'.
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20210411110458.15955-5-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Change the type of fw_current_in_ps_mode from u8 to bool, because
it is used everywhere as a bool and, accordingly, it should be
declared as a bool.
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20210411110458.15955-4-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Correct misspelled words in comments of several files. Issue (largely)
detected by checkpatch.pl.
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20210411110458.15955-3-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove camelcase in bFwCurrentInPSMode, a variable used by code
of several subdirectories/files of the driver. Issue detected by
checkpatch.pl. Delete the unnecessary "b" (that stands for "byte") from
the beginning of the name.
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20210411110458.15955-2-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In the first list_for_each_entry() macro of dma_async_device_register,
it gets the chan from list and calls __dma_async_device_channel_register
(..,chan). We can see that chan->local is allocated by alloc_percpu() and
it is freed chan->local by free_percpu(chan->local) when
__dma_async_device_channel_register() failed.
But after __dma_async_device_channel_register() failed, the caller will
goto err_out and freed the chan->local in the second time by free_percpu().
The cause of this problem is forget to set chan->local to NULL when
chan->local was freed in __dma_async_device_channel_register(). My
patch sets chan->local to NULL when the callee failed to avoid double free.
Fixes: d2fb0a0438384 ("dmaengine: break out channel registration")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20210331014458.3944-1-lyl2019@mail.ustc.edu.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Some architectures do not provide devm_*() APIs. Hence make the driver
dependent on HAVE_IOMEM.
Fixes: dbde5c2934d1 ("dw_dmac: use devm_* functions to simplify code")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20210324141757.24710-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
WQ size can only be changed when the device is disabled. Current code
allows change when device is enabled but wq is disabled. Change the check
to detect device state.
Fixes: c52ca478233c ("dmaengine: idxd: add configuration component of driver")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/161782558755.107710.18138252584838406025.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add the missing unlock before return from function usbip_sockfd_store()
in the error handling case.
Fixes: bd8b82042269 ("usbip: vudc synchronize sysfs code paths")
Reported-by: Hulk Robot <hulkci@huawei.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/r/20210408112305.1022247-1-yebin10@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The operation capability register is 256bits. The current output only
prints out the first 64bits. Fix to output the entire 256bits. The current
code omits operation caps from IAX devices.
Fixes: c52ca478233c ("dmaengine: idxd: add configuration component of driver")
Reported-by: Lucas Van <lucas.van@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/161645624963.2003736.829798666998490151.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The delta_rec_size and crc_val in the completion record should
be 32bits and not 16bits.
Fixes: bfe1d56091c1 ("dmaengine: idxd: Init and probe for Intel data accelerators")
Reported-by: Nikhil Rao <nikhil.rao@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/161645618572.2003490.14466173451736323035.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Current code blindly writes over the SWERR and the OVERFLOW bits. Write
back the bits actually read instead so the driver avoids clobbering the
OVERFLOW bit that comes after the register is read.
Fixes: bfe1d56091c1 ("dmaengine: idxd: Init and probe for Intel data accelerators")
Reported-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/161352082229.3511254.1002151220537623503.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The rxchannel id is updated by the driver using the
port no value, but this does not ensure that the value
is correct. So now rx channel value is obtained from
etoc channel map value.
Fixes: 567be3a5d227 ("crypto: chelsio - Use multiple txq/rxq per...")
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Check within geneve_xmit_skb/geneve6_xmit_skb that sk_buff structure
is large enough to include IPv4 or IPv6 header, and reject if not. The
geneve_xmit_skb portion and overall idea was contributed by Eric Dumazet.
Fixes a KMSAN-found uninit-value bug reported by syzbot at:
https://syzkaller.appspot.com/bug?id=abe95dc3e3e9667fc23b8d81f29ecad95c6f106f
Suggested-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+2e406a9ac75bb71d4b7a@syzkaller.appspotmail.com
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the probe fails, we must disable the regulator that was previously
enabled.
This patch is a follow-up to commit ac88c531a5b3
("net: davicom: Fix regulator not turned off on failed probe") which missed
one case.
Fixes: 7994fe55a4a2 ("dm9000: Add regulator and reset support to dm9000")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update maintainer entry for freescale fec driver.
Suggested-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Detected a broken boot on mcf54415, likely introduced from
commit 4bfc848e0981
("m68k/mm: enable use of generic memory_model.h for !DISCONTIGMEM")
Fix ARCH_PFN_OFFSET to be a pfn.
Signed-off-by: Angelo Dureghello <angelo@kernel-space.org>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"One more patch that we'd like to get to 5.12 before release.
It's changing where and how the superblock is stored in the zoned
mode. It is an on-disk format change but so far there are no
implications for users as the proper mkfs support hasn't been merged
and is waiting for the kernel side to settle.
Until now, the superblocks were derived from the zone index, but zone
size can differ per device. This is changed to be based on fixed
offset values, to make it independent of the device zone size.
The work on that got a bit delayed, we discussed the exact locations
to support potential device sizes and usecases. (Partially delayed
also due to my vacation.) Having that in the same release where the
zoned mode is declared usable is highly desired, there are userspace
projects that need to be updated to recognize the feature. Pushing
that to the next release would make things harder to test"
* tag 'for-5.12-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: zoned: move superblock logging zone location
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixlets from Ingo Molnar:
"Two minor fixes: one for a Clang warning, the other improves an
ambiguous/confusing kernel log message"
* tag 'locking-urgent-2021-04-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
lockdep: Address clang -Wformat warning printing for %hd
lockdep: Add a missing initialization hint to the "INFO: Trying to register non-static key" message
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Fix the vDSO exception handling return path to disable interrupts
again.
- A fix for the CE collector to return the proper return values to its
callers which are used to convey what the collector has done with the
error address.
* tag 'x86_urgent_for_v5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/traps: Correct exc_general_protection() and math_error() return paths
RAS/CEC: Correct ce_add_elem()'s returned values
|
|
This change adds KASAN-KUnit tests support for the async HW_TAGS mode.
In async mode, tag fault aren't being generated synchronously when a
bad access happens, but are instead explicitly checked for by the kernel.
As each KASAN-KUnit test expect a fault to happen before the test is over,
check for faults as a part of the test handler.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/r/20210315132019.33202-10-vincenzo.frascino@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
When MTE async mode is enabled TFSR_EL1 contains the accumulative
asynchronous tag check faults for EL1 and EL0.
During the suspend/resume operations the firmware might perform some
operations that could change the state of the register resulting in
a spurious tag check fault report.
Report asynchronous tag faults before suspend and clear the TFSR_EL1
register after resume to prevent this to happen.
Cc: Will Deacon <will@kernel.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/r/20210315132019.33202-9-vincenzo.frascino@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
MTE provides a mode that asynchronously updates the TFSR_EL1 register
when a tag check exception is detected.
To take advantage of this mode the kernel has to verify the status of
the register at:
1. Context switching
2. Return to user/EL0 (Not required in entry from EL0 since the kernel
did not run)
3. Kernel entry from EL1
4. Kernel exit to EL1
If the register is non-zero a trace is reported.
Add the required features for EL1 detection and reporting.
Note: ITFSB bit is set in the SCTLR_EL1 register hence it guaranties that
the indirect writes to TFSR_EL1 are synchronized at exception entry to
EL1. On the context switch path the synchronization is guarantied by the
dsb() in __switch_to().
The dsb(nsh) in mte_check_tfsr_exit() is provisional pending
confirmation by the architects.
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/r/20210315132019.33202-8-vincenzo.frascino@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
mte_enable_kernel_*() are not needed if KASAN_HW is disabled.
Add ash defines around the functions to conditionally compile the
functions.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20210315132019.33202-7-vincenzo.frascino@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
load_unaligned_zeropad() and __get/put_kernel_nofault() functions can
read past some buffer limits which may include some MTE granule with a
different tag.
When MTE async mode is enabled, the load operation crosses the boundaries
and the next granule has a different tag the PE sets the TFSR_EL1.TF1 bit
as if an asynchronous tag fault is happened.
Enable Tag Check Override (TCO) in these functions before the load and
disable it afterwards to prevent this to happen.
Note: The same condition can be hit in MTE sync mode but we deal with it
through the exception handling.
In the current implementation, mte_async_mode flag is set only at boot
time but in future kasan might acquire some runtime features that
that change the mode dynamically, hence we disable it when sync mode is
selected for future proof.
Cc: Will Deacon <will@kernel.org>
Reported-by: Branislav Rankov <Branislav.Rankov@arm.com>
Tested-by: Branislav Rankov <Branislav.Rankov@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/r/20210315132019.33202-6-vincenzo.frascino@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
KASAN provides an asynchronous mode of execution.
Add reporting functionality for this mode.
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Link: https://lore.kernel.org/r/20210315132019.33202-5-vincenzo.frascino@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
arch_enable_tagging() was left in memory.h after the introduction of
async mode to not break the bysectability of the KASAN KUNIT tests.
Remove the function now that KASAN has been fully converted.
Cc: Will Deacon <will@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/r/20210315132019.33202-4-vincenzo.frascino@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Architectures supported by KASAN_HW_TAGS can provide a sync or async mode
of execution. On an MTE enabled arm64 hw for example this can be identified
with the synchronous or asynchronous tagging mode of execution.
In synchronous mode, an exception is triggered if a tag check fault occurs.
In asynchronous mode, if a tag check fault occurs, the TFSR_EL1 register is
updated asynchronously. The kernel checks the corresponding bits
periodically.
KASAN requires a specific kernel command line parameter to make use of this
hw features.
Add KASAN HW execution mode kernel command line parameter.
Note: This patch adds the kasan.mode kernel parameter and the
sync/async kernel command line options to enable the described features.
[ Add a new var instead of exposing kasan_arg_mode to be consistent with
flags for other command line arguments. ]
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Link: https://lore.kernel.org/r/20210315132019.33202-3-vincenzo.frascino@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
MTE provides an asynchronous mode for detecting tag exceptions. In
particular instead of triggering a fault the arm64 core updates a
register which is checked by the kernel after the asynchronous tag
check fault has occurred.
Add support for MTE asynchronous mode.
The exception handling mechanism will be added with a future patch.
Note: KASAN HW activates async mode via kasan.mode kernel parameter.
The default mode is set to synchronous.
The code that verifies the status of TFSR_EL1 will be added with a
future patch.
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/r/20210315132019.33202-2-vincenzo.frascino@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
As suggested by Arnd Bergmann, the newly added mmc aliases
should be board specific, so move them from the general dtsi
to the individual boards.
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20210324122235.1059292-7-heiko@sntech.de
|
|
As suggested by Arnd Bergmann, the newly added mmc aliases
should be board specific, so move them from the general dtsi
to the individual boards.
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20210324122235.1059292-6-heiko@sntech.de
|
|
As suggested by Arnd Bergmann, the newly added mmc aliases
should be board specific, so move them from the general dtsi
to the individual boards.
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20210324122235.1059292-5-heiko@sntech.de
|
|
As suggested by Arnd Bergmann, the newly added mmc aliases
should be board specific, so move them from the general dtsi
to the individual boards.
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20210324122235.1059292-4-heiko@sntech.de
|
|
As suggested by Arnd Bergmann, the newly added mmc aliases
should be board specific, so move them from the general dtsi
to the individual boards.
For the Engicam-boards this means a split as the core
boards contains the emmc while the commit baseboard handles
sdmmc and sdio.
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20210324122235.1059292-3-heiko@sntech.de
|
|
As suggested by Arnd Bergmann, mmc-aliases are supposed to be
board-specific, so move the newly added general aliases to
the board-level on rv1108-based boards.
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20210324122235.1059292-2-heiko@sntech.de
|
|
As suggested by Arnd Bergmann, mmc-aliases are supposed to be
board-specific, so move the newly added general aliases to
the board-level on rk322x-based boards.
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20210324122235.1059292-1-heiko@sntech.de
|
|
This reverts commit 04b8edad262eec0d153005973dfbdd83423c0dcb.
mx25l51245g and mx66l51235l have the same flash ID. The flash
detection returns the first entry in the flash_info array that
matches the flash ID that was read, thus for the 0xc2201a ID,
mx25l51245g was always hit, introducing a regression for
mx66l51235l.
If one wants to differentiate the flash names, a better fix would be
to differentiate between the two at run-time, depending on SFDP,
and choose the correct name from a list of flash names, depending on
the SFDP differentiator.
Fixes: 04b8edad262e ("mtd: spi-nor: macronix: Add support for mx25l51245g")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210402082031.19055-2-tudor.ambarus@microchip.com
|
|
If rmmod the driver during read or write, the driver will release the
resources which are used during read or write, so it is possible to
refer to NULL pointer.
Use the testcase "mtd_debug read /dev/mtd0 0xc00000 0x400000 dest_file &
sleep 0.5;rmmod spi_hisi_sfc_v3xx.ko", the issue can be reproduced in
hisi_sfc_v3xx driver.
To avoid the issue, fill the interface _get_device and _put_device of
mtd_info to grab the reference to the spi controller driver module, so
the request of rmmod the driver is rejected before read/write is finished.
Fixes: b199489d37b2 ("mtd: spi-nor: add the framework for SPI NOR")
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Tested-by: Michael Walle <michael@walle.cc>
Tested-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1617262486-4223-1-git-send-email-yangyicong@hisilicon.com
|