| Age | Commit message (Collapse) | Author |
|---|
|
Make sure that n_channels is set after allocating the
struct cfg80211_registered_device::int_scan_req member. Seen with
syzkaller:
UBSAN: array-index-out-of-bounds in net/mac80211/scan.c:1208:5
index 0 is out of range for type 'struct ieee80211_channel *[] __counted_by(n_channels)' (aka 'struct ieee80211_channel *[]')
This was missed in the initial conversions because I failed to locate
the allocation likely due to the "sizeof(void *)" not matching the
"channels" array type.
Reported-by: syzbot+4bcdddd48bb6f0be0da1@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/lkml/680fd171.050a0220.2b69d1.045e.GAE@google.com/
Fixes: e3eac9f32ec0 ("wifi: cfg80211: Annotate struct cfg80211_scan_request with __counted_by")
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/20250509184641.work.542-kees@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Microdia JP001 does not support reading the sample rate which leads to
many lines of "cannot get freq at ep 0x84".
This patch adds the USB ID to quirks.c and avoids those error messages.
usb 7-4: New USB device found, idVendor=0c45, idProduct=636b, bcdDevice= 1.00
usb 7-4: New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 7-4: Product: JP001
usb 7-4: Manufacturer: JP001
usb 7-4: SerialNumber: JP001
usb 7-4: 3:1: cannot get freq at ep 0x84
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicolas Chauvet <kwizart@gmail.com>
Link: https://patch.msgid.link/20250515102132.73062-1-kwizart@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Commit 157ae5ffd76a dmaengine: mediatek: Fix a possible deadlock error
in mtk_cqdma_tx_status() fixed locks but kept unused varibale leading to
warning and build failure (due to warning treated as errors)
drivers/dma/mediatek/mtk-cqdma.c: In function 'mtk_cqdma_find_active_desc':
drivers/dma/mediatek/mtk-cqdma.c:423:23: error: unused variable 'flags' [-Werror=unused-variable]
423 | unsigned long flags;
| ^~~~~
Fix by dropping this unused flag
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 157ae5ffd76a ("dmaengine: mediatek: Fix a possible deadlock error in mtk_cqdma_tx_status()")
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
If ntuple filters count is modified followed by
unicast filters count using devlink then the ntuple count
set by user is ignored and all the ntuple filters are
being reallocated. Fix this by storing the ntuple count
set by user. Without this patch, say if user tries
to modify ntuple count as 8 followed by ucast filter count as 4
using devlink commands then ntuple count is being reverted to
default value 16 i.e, not retaining user set value 8.
Fixes: 39c469188b6d ("octeontx2-pf: Add ucast filter count configurability via devlink.")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1747054357-5850-1-git-send-email-sbhatta@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Matthew Wilcox (Oracle) <willy@infradead.org> says:
FUSE already uses folios for its symlinks. Mirror that conversion in
the generic code and the NFS code. That lets us get rid of a few
folio->page->folio conversions in this path, and some of the few
remaining users of read_cache_page() / read_mapping_page().
* patches from https://lore.kernel.org/20250514171316.3002934-1-willy@infradead.org:
fs: Pass a folio to page_put_link()
nfs: Use a folio in nfs_get_link()
fs: Convert __page_get_link() to use a folio
Link: https://lore.kernel.org/20250514171316.3002934-1-willy@infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
All callers now have a folio. Pass it to page_put_link(), saving a
hidden call to compound_head(). Also add kernel-doc for page_get_link()
and page_put_link().
Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Link: https://lore.kernel.org/20250514171316.3002934-4-willy@infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Mirror the changes to __page_get_link() by retrieving a folio from
the page cache instead of a page. Removes two hidden calls to
compound_head().
Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Link: https://lore.kernel.org/20250514171316.3002934-3-willy@infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Retrieve a folio from the page cache instead of a page and operate
on it. Removes two hidden calls to compound_head().
Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Link: https://lore.kernel.org/20250514171316.3002934-2-willy@infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Try and make a few filesystem operations killable on the VFS
inode->i_mutex level.
* patches from https://lore.kernel.org/20250513150327.1373061-1-max.kellermann@ionos.com:
fs/read_write: make default_llseek() killable
fs/open: make do_truncate() killable
fs/open: make chmod_common() and chown_common() killable
include/linux/fs.h: add inode_lock_killable()
Link: https://lore.kernel.org/20250513150327.1373061-1-max.kellermann@ionos.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Allows killing processes that are waiting for the inode lock.
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Link: https://lore.kernel.org/20250513150327.1373061-4-max.kellermann@ionos.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Allows killing processes that are waiting for the inode lock.
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Link: https://lore.kernel.org/20250513150327.1373061-3-max.kellermann@ionos.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Allows killing processes that are waiting for the inode lock.
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Link: https://lore.kernel.org/20250513150327.1373061-2-max.kellermann@ionos.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Prepare for making inode operations killable while they're waiting for
the lock.
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Link: https://lore.kernel.org/20250513150327.1373061-1-max.kellermann@ionos.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Ensure that the hdr_trans_tlv command is included in the broadcast wtbl to
prevent the IPv6 and multicast packet from being dropped by the chip.
Cc: stable@vger.kernel.org
Fixes: cb1353ef3473 ("wifi: mt76: mt7925: integrate *mlo_sta_cmd and *sta_cmd")
Reported-by: Benjamin Xiao <fossben@pm.me>
Tested-by: Niklas Schnelle <niks@kernel.org>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://lore.kernel.org/lkml/EmWnO5b-acRH1TXbGnkx41eJw654vmCR-8_xMBaPMwexCnfkvKCdlU5u19CGbaapJ3KRu-l3B-tSUhf8CCQwL0odjo6Cd5YG5lvNeB-vfdg=@pm.me/
Link: https://patch.msgid.link/20250509010421.403022-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
This is a preparation for large readdir buffers in fuse.
Simply setting the fuse buffer size to the userspace buffer size should
work, the record sizes are similar (fuse's is slightly larger than libc's,
so no overflow should ever happen).
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
Link: https://lore.kernel.org/20250513151012.1476536-1-mszeredi@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
A warning on driver removal started occurring after commit 9dd05df8403b
("net: warn if NAPI instance wasn't shut down"). Disable tx napi before
deleting it in mt76_dma_cleanup().
WARNING: CPU: 4 PID: 18828 at net/core/dev.c:7288 __netif_napi_del_locked+0xf0/0x100
CPU: 4 UID: 0 PID: 18828 Comm: modprobe Not tainted 6.15.0-rc4 #4 PREEMPT(lazy)
Hardware name: ASUS System Product Name/PRIME X670E-PRO WIFI, BIOS 3035 09/05/2024
RIP: 0010:__netif_napi_del_locked+0xf0/0x100
Call Trace:
<TASK>
mt76_dma_cleanup+0x54/0x2f0 [mt76]
mt7921_pci_remove+0xd5/0x190 [mt7921e]
pci_device_remove+0x47/0xc0
device_release_driver_internal+0x19e/0x200
driver_detach+0x48/0x90
bus_remove_driver+0x6d/0xf0
pci_unregister_driver+0x2e/0xb0
__do_sys_delete_module.isra.0+0x197/0x2e0
do_syscall_64+0x7b/0x160
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Tested with mt7921e but the same pattern can be actually applied to other
mt76 drivers calling mt76_dma_cleanup() during removal. Tx napi is enabled
in their *_dma_init() functions and only toggled off and on again inside
their suspend/resume/reset paths. So it should be okay to disable tx
napi in such a generic way.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 2ac515a5d74f ("mt76: mt76x02: use napi polling for tx cleanup")
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Tested-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250506115540.19045-1-pchelkin@ispras.ru
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
On our HDFS servers with 12 HDDs per server, a HDFS datanode[0] startup
involves scanning all files and caching their metadata (including dentries
and inodes) in memory. Each HDD contains approximately 2 million files,
resulting in a total of ~20 million cached dentries after initialization.
To minimize dentry reclamation, we set vfs_cache_pressure to 1. Despite
this configuration, memory pressure conditions can still trigger
reclamation of up to 50% of cached dentries, reducing the cache from 20
million to approximately 10 million entries. During the subsequent cache
rebuild period, any HDFS datanode restart operation incurs substantial
latency penalties until full cache recovery completes.
To maintain service stability, we need to preserve more dentries during
memory reclamation. The current minimum reclaim ratio (1/100 of total
dentries) remains too aggressive for our workload. This patch introduces
vfs_cache_pressure_denom for more granular cache pressure control. The
configuration [vfs_cache_pressure=1, vfs_cache_pressure_denom=10000]
effectively maintains the full 20 million dentry cache under memory
pressure, preventing datanode restart performance degradation.
Link: https://hadoop.apache.org/docs/r1.2.1/hdfs_design.html#NameNode+and+DataNodes [0]
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/20250511083624.9305-1-laoar.shao@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When getting the directory contents, the entries are first fetched to a
kernel buffer, then they are copied to userspace with dir_emit(). This
second phase is non-blocking as long as the userspace buffer is not paged
out, making it interruptible makes zero sense.
Overload d_type as flags, since it only uses 4 bits from 32.
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Link: https://lore.kernel.org/20250513112335.1473177-1-mszeredi@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Add proper pahole version dependency to CONFIG_GENDWARFKSYMS to avoid
module loading errors
- Fix UAPI header tests for the OpenRISC architecture
- Add dependency on the libdw package in Debian and RPM packages
- Disable -Wdefault-const-init-unsafe warnings on Clang
- Make "make clean ARCH=um" also clean the arch/x86/ directory
- Revert the use of -fmacro-prefix-map=, which causes issues with
debugger usability
* tag 'kbuild-fixes-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: fix typos "module.builtin" to "modules.builtin"
Revert "kbuild, rust: use -fremap-path-prefix to make paths relative"
Revert "kbuild: make all file references relative to source root"
kbuild: fix dependency on sorttable
init: remove unused CONFIG_CC_CAN_LINK_STATIC
um: let 'make clean' properly clean underlying SUBARCH as well
kbuild: Disable -Wdefault-const-init-unsafe
kbuild: rpm-pkg: Add (elfutils-devel or libdw-devel) to BuildRequires
kbuild: deb-pkg: Add libdw-dev:native to Build-Depends-Arch
usr/include: openrisc: don't HDRTEST bpf_perf_event.h
kbuild: Require pahole <v1.28 or >v1.29 with GENDWARFKSYMS on X86
|
|
Michael Kelley says:
====================
hv_netvsc: Fix error "nvsp_rndis_pkt_complete error status: 2"
Starting with commit dca5161f9bd0 in the 6.3 kernel, the Linux driver
for Hyper-V synthetic networking (netvsc) occasionally reports
"nvsp_rndis_pkt_complete error status: 2".[1] This error indicates
that Hyper-V has rejected a network packet transmit request from the
guest, and the outgoing network packet is dropped. Higher level
network protocols presumably recover and resend the packet so there is
no functional error, but performance is slightly impacted. Commit
dca5161f9bd0 is not the cause of the error -- it only added reporting
of an error that was already happening without any notice. The error
has presumably been present since the netvsc driver was originally
introduced into Linux.
This patch set fixes the root cause of the problem, which is that the
netvsc driver in Linux may send an incorrectly formatted VMBus message
to Hyper-V when transmitting the network packet. The incorrect
formatting occurs when the rndis header of the VMBus message crosses a
page boundary due to how the Linux skb head memory is aligned. In such
a case, two PFNs are required to describe the location of the rndis
header, even though they are contiguous in guest physical address
(GPA) space. Hyper-V requires that two PFNs be in a single "GPA range"
data struture, but current netvsc code puts each PFN in its own GPA
range, which Hyper-V rejects as an error in the case of the rndis
header.
The incorrect formatting occurs only for larger packets that netvsc
must transmit via a VMBus "GPA Direct" message. There's no problem
when netvsc transmits a smaller packet by copying it into a pre-
allocated send buffer slot because the pre-allocated slots don't have
page crossing issues.
After commit 14ad6ed30a10 in the 6.14 kernel, the error occurs much
more frequently in VMs with 16 or more vCPUs. It may occur every few
seconds, or even more frequently, in a ssh session that outputs a lot
of text. Commit 14ad6ed30a10 subtly changes how skb head memory is
allocated, making it much more likely that the rndis header will cross
a page boundary when the vCPU count is 16 or more. The changes in
commit 14ad6ed30a10 are perfectly valid -- they just had the side
effect of making the netvsc bug more prominent.
One fix is to check for adjacent PFNs in vmbus_sendpacket_pagebuffer()
and just combine them into a single GPA range. Such a fix is very
contained. But conceptually it is fixing the problem at the wrong
level. So this patch set takes the broader approach of maintaining
the already known grouping of contiguous PFNs at a higher level in
the netvsc driver code, and propagating that grouping down to the
creation of the VMBus message to send to Hyper-V. Maintaining the
grouping fixes this problem, and has the added benefit of allowing
netvsc_dma_map() to make fewer calls to dma_map_single() to do bounce
buffering in CoCo VMs.
Patch 1 is a preparatory change to allow vmbus_sendpacket_mpb_desc()
to specify multiple GPA ranges. In current code
vmbus_sendpacket_mpb_desc() is used only by the storvsc synthetic SCSI
driver, and it always creates a single GPA range.
Patch 2 updates the netvsc driver to use vmbus_sendpacket_mpb_desc()
instead of vmbus_sendpacket_pagebuffer(). Because the higher levels of
netvsc still don't group contiguous PFNs, this patch is functionally
neutral. The VMBus message to Hyper-V still has many GPA ranges, each
with a single PFN. But it lays the groundwork for the next patch.
Patch 3 changes the higher levels of netvsc to preserve the already
known grouping of contiguous PFNs. When the contiguous groupings are
passed to vmbus_sendpacket_mpb_desc(), GPA ranges containing multiple
PFNs are produced, as expected by Hyper-V. This is point at which the
core problem is fixed.
Patches 4 and 5 remove code that is no longer necessary after the
previous patches.
These changes provide a net reduction of about 65 lines of code, which
is an added benefit.
These changes have been tested in normal VMs, in SEV-SNP and TDX CoCo
VMs, and in Dv6-series VMs where the netvsp implementation is in the
OpenHCL paravisor instead of the Hyper-V host.
These changes are built against kernel version 6.15-rc6.
[1] https://bugzilla.kernel.org/show_bug.cgi?id=217503
====================
Link: https://patch.msgid.link/20250513000604.1396-1-mhklinux@outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With the netvsc driver changed to use vmbus_sendpacket_mpb_desc()
instead of vmbus_sendpacket_pagebuffer(), the latter has no remaining
callers. Remove it.
Cc: <stable@vger.kernel.org> # 6.1.x
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Link: https://patch.msgid.link/20250513000604.1396-6-mhklinux@outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
init_page_array() now always creates a single page buffer array entry
for the rndis message, even if the rndis message crosses a page
boundary. As such, the number of page buffer array entries used for
the rndis message must no longer be tracked -- it is always just 1.
Remove the rmsg_pgcnt field and use "1" where the value is needed.
Cc: <stable@vger.kernel.org> # 6.1.x
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Link: https://patch.msgid.link/20250513000604.1396-5-mhklinux@outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Starting with commit dca5161f9bd0 ("hv_netvsc: Check status in
SEND_RNDIS_PKT completion message") in the 6.3 kernel, the Linux
driver for Hyper-V synthetic networking (netvsc) occasionally reports
"nvsp_rndis_pkt_complete error status: 2".[1] This error indicates
that Hyper-V has rejected a network packet transmit request from the
guest, and the outgoing network packet is dropped. Higher level
network protocols presumably recover and resend the packet so there is
no functional error, but performance is slightly impacted. Commit
dca5161f9bd0 is not the cause of the error -- it only added reporting
of an error that was already happening without any notice. The error
has presumably been present since the netvsc driver was originally
introduced into Linux.
The root cause of the problem is that the netvsc driver in Linux may
send an incorrectly formatted VMBus message to Hyper-V when
transmitting the network packet. The incorrect formatting occurs when
the rndis header of the VMBus message crosses a page boundary due to
how the Linux skb head memory is aligned. In such a case, two PFNs are
required to describe the location of the rndis header, even though
they are contiguous in guest physical address (GPA) space. Hyper-V
requires that two rndis header PFNs be in a single "GPA range" data
struture, but current netvsc code puts each PFN in its own GPA range,
which Hyper-V rejects as an error.
The incorrect formatting occurs only for larger packets that netvsc
must transmit via a VMBus "GPA Direct" message. There's no problem
when netvsc transmits a smaller packet by copying it into a pre-
allocated send buffer slot because the pre-allocated slots don't have
page crossing issues.
After commit 14ad6ed30a10 ("net: allow small head cache usage with
large MAX_SKB_FRAGS values") in the 6.14-rc4 kernel, the error occurs
much more frequently in VMs with 16 or more vCPUs. It may occur every
few seconds, or even more frequently, in an ssh session that outputs a
lot of text. Commit 14ad6ed30a10 subtly changes how skb head memory is
allocated, making it much more likely that the rndis header will cross
a page boundary when the vCPU count is 16 or more. The changes in
commit 14ad6ed30a10 are perfectly valid -- they just had the side
effect of making the netvsc bug more prominent.
Current code in init_page_array() creates a separate page buffer array
entry for each PFN required to identify the data to be transmitted.
Contiguous PFNs get separate entries in the page buffer array, and any
information about contiguity is lost.
Fix the core issue by having init_page_array() construct the page
buffer array to represent contiguous ranges rather than individual
pages. When these ranges are subsequently passed to
netvsc_build_mpb_array(), it can build GPA ranges that contain
multiple PFNs, as required to avoid the error "nvsp_rndis_pkt_complete
error status: 2". If instead the network packet is sent by copying
into a pre-allocated send buffer slot, the copy proceeds using the
contiguous ranges rather than individual pages, but the result of the
copying is the same. Also fix rndis_filter_send_request() to construct
a contiguous range, since it has its own page buffer array.
This change has a side benefit in CoCo VMs in that netvsc_dma_map()
calls dma_map_single() on each contiguous range instead of on each
page. This results in fewer calls to dma_map_single() but on larger
chunks of memory, which should reduce contention on the swiotlb.
Since the page buffer array now contains one entry for each contiguous
range instead of for each individual page, the number of entries in
the array can be reduced, saving 208 bytes of stack space in
netvsc_xmit() when MAX_SKG_FRAGS has the default value of 17.
[1] https://bugzilla.kernel.org/show_bug.cgi?id=217503
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217503
Cc: <stable@vger.kernel.org> # 6.1.x
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Link: https://patch.msgid.link/20250513000604.1396-4-mhklinux@outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
netvsc currently uses vmbus_sendpacket_pagebuffer() to send VMBus
messages. This function creates a series of GPA ranges, each of which
contains a single PFN. However, if the rndis header in the VMBus
message crosses a page boundary, the netvsc protocol with the host
requires that both PFNs for the rndis header must be in a single "GPA
range" data structure, which isn't possible with
vmbus_sendpacket_pagebuffer(). As the first step in fixing this, add a
new function netvsc_build_mpb_array() to build a VMBus message with
multiple GPA ranges, each of which may contain multiple PFNs. Use
vmbus_sendpacket_mpb_desc() to send this VMBus message to the host.
There's no functional change since higher levels of netvsc don't
maintain or propagate knowledge of contiguous PFNs. Based on its
input, netvsc_build_mpb_array() still produces a separate GPA range
for each PFN and the behavior is the same as with
vmbus_sendpacket_pagebuffer(). But the groundwork is laid for a
subsequent patch to provide the necessary grouping.
Cc: <stable@vger.kernel.org> # 6.1.x
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Link: https://patch.msgid.link/20250513000604.1396-3-mhklinux@outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
vmbus_sendpacket_mpb_desc() is currently used only by the storvsc driver
and is hardcoded to create a single GPA range. To allow it to also be
used by the netvsc driver to create multiple GPA ranges, no longer
hardcode as having a single GPA range. Allow the calling driver to
specify the rangecount in the supplied descriptor.
Update the storvsc driver to reflect this new approach.
Cc: <stable@vger.kernel.org> # 6.1.x
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Link: https://patch.msgid.link/20250513000604.1396-2-mhklinux@outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm fixes from Jarkko Sakkinen:
"A few last minute fixes for v6.15"
* tag 'tpmdd-next-6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: tis: Double the timeout B to 4s
char: tpm: tpm-buf: Add sanity check fallback in read helpers
tpm: Mask TPM RC in tpm2_start_auth_session()
|
|
Each CGX block supports 4 logical MACs (LMACS). Receive
counters CGX_CMR_RX_STAT0-8 are per LMAC and CGX_CMR_RX_STAT9-12
are per CGX.
Due a bug in previous patch, stale Per CGX counters values observed.
Fixes: 66208910e57a ("octeontx2-af: Support to retrieve CGX LMAC stats")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://patch.msgid.link/20250513071554.728922-1-hkelam@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since MTK_ESW_BIT is a bit number rather than a bitmap, it causes
MTK_HAS_CAPS to produce incorrect results. This leads to the ETH
driver not declaring MAC capabilities correctly for the MT7988 ESW.
Fixes: 445eb6448ed3 ("net: ethernet: mtk_eth_soc: add basic support for MT7988 SoC")
Signed-off-by: Bo-Cun Chen <bc-bocun.chen@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/b8b37f409d1280fad9c4d32521e6207f63cd3213.1747110258.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For the new SW-FW interaction, missing the error return if there is an
unknown command. It causes the driver to mistakenly believe that the
interaction is complete. This problem occurs when new driver is paired
with old firmware, which does not support the new mailbox commands.
Fixes: 2e5af6b2ae85 ("net: txgbe: Add basic support for new AML devices")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/64DBB705D35A0016+20250513021009.145708-4-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For the new SW-FW interaction, the timeout waiting for the firmware to
return is too short. So that some mailbox commands cannot be completed.
Use the 'timeout' parameter instead of fixed timeout value for flexible
configuration.
Fixes: 2e5af6b2ae85 ("net: txgbe: Add basic support for new AML devices")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/5D5BDE3EA501BDB8+20250513021009.145708-3-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the new firmware version, the shadow ram reserves some space to store
I2C information, so the checksum calculation needs to skip this section.
Otherwise, the driver will fail to probe because the invalid EEPROM
checksum.
Fixes: 2e5af6b2ae85 ("net: txgbe: Add basic support for new AML devices")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1C6BF7A937237F5A+20250513021009.145708-2-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
MASCEC hardware block has a field called maximum transmit size for
TX secy. Max packet size going out of MCS block has be programmed
taking into account full packet size which has L2 header,SecTag
and ICV. MACSEC offload driver is configuring max transmit size as
macsec interface MTU which is incorrect. Say with 1500 MTU of real
device, macsec interface created on top of real device will have MTU of
1468(1500 - (SecTag + ICV)). This is causing packets from macsec
interface of size greater than or equal to 1468 are not getting
transmitted out because driver programmed max transmit size as 1468
instead of 1514(1500 + ETH_HDR_LEN).
Fixes: c54ffc73601c ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1747053756-4529-1-git-send-email-sbhatta@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some TC filters have actions listed as indexed arrays of nests
and some as just nests. They are all indexed arrays, the handling
is common across filters.
Fixes: 2267672a6190 ("doc/netlink/specs: Update the tc spec")
Link: https://patch.msgid.link/20250513221638.842532-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix up spelling of two attribute names. These are clearly typoes
and will prevent C codegen from working. Let's treat this as
a fix to get the correction into users' hands ASAP, and prevent
anyone depending on the wrong names.
Fixes: a1bcfde83669 ("doc/netlink/specs: Add a spec for tc")
Link: https://patch.msgid.link/20250513221316.841700-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With some Infineon chips the timeouts in tpm_tis_send_data (both B and
C) can reach up to about 2250 ms.
Timeout C is retried since
commit de9e33df7762 ("tpm, tpm_tis: Workaround failed command reception on Infineon devices")
Timeout B still needs to be extended.
The problem is most commonly encountered with context related operation
such as load context/save context. These are issued directly by the
kernel, and there is no retry logic for them.
When a filesystem is set up to use the TPM for unlocking the boot fails,
and restarting the userspace service is ineffective. This is likely
because ignoring a load context/save context result puts the real TPM
state and the TPM state expected by the kernel out of sync.
Chips known to be affected:
tpm_tis IFX1522:00: 2.0 TPM (device-id 0x1D, rev-id 54)
Description: SLB9672
Firmware Revision: 15.22
tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1B, rev-id 22)
Firmware Revision: 7.83
tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1A, rev-id 16)
Firmware Revision: 5.63
Link: https://lore.kernel.org/linux-integrity/Z5pI07m0Muapyu9w@kitsune.suse.cz/
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Fix Smatch-detected issue:
drivers/char/tpm/tpm-buf.c:208 tpm_buf_read_u8() error:
uninitialized symbol 'value'.
drivers/char/tpm/tpm-buf.c:225 tpm_buf_read_u16() error:
uninitialized symbol 'value'.
drivers/char/tpm/tpm-buf.c:242 tpm_buf_read_u32() error:
uninitialized symbol 'value'.
Zero-initialize the return values in tpm_buf_read_u8(), tpm_buf_read_u16(),
and tpm_buf_read_u32() to guard against uninitialized data in case of a
boundary overflow.
Add defensive initialization ensures the return values are always defined,
preventing undefined behavior if the unexpected happens.
Signed-off-by: Purva Yeshi <purvayeshi550@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
tpm2_start_auth_session() does not mask TPM RC correctly from the callers:
[ 28.766528] tpm tpm0: A TPM error (2307) occurred start auth session
Process TPM RCs inside tpm2_start_auth_session(), and map them to POSIX
error codes.
Cc: stable@vger.kernel.org # v6.10+
Fixes: 699e3efd6c64 ("tpm: Add HMAC session start and end functions")
Reported-by: Herbert Xu <herbert@gondor.apana.org.au>
Closes: https://lore.kernel.org/linux-integrity/Z_NgdRHuTKP6JK--@gondor.apana.org.au/
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix potential endless loop when discarding a block group when
disabling discard
- reinstate message when setting a large value of mount option 'commit'
- fix a folio leak when async extent submission fails
* tag 'for-6.15-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: add back warning for mount option commit values exceeding 300
btrfs: fix folio leak in submit_one_async_extent()
btrfs: fix discard worker infinite loop after disabling discard
|
|
cifs_prepare_read() might be called with a disconnected channel, where
TCP_Server_Info::max_read is set to zero due to reconnect, so calling
->negotiate_rize() will set @rsize to default min IO size (64KiB) and
then logging
CIFS: VFS: SMB: Zero rsize calculated, using minimum value
65536
If the reconnect happens in cifsd thread, cifs_renegotiate_iosize()
will end up being called and then @rsize set to the expected value.
Since we can't rely on the value of @server->max_read by the time we
call cifs_prepare_read(), try to ->negotiate_rize() only if
@cifs_sb->ctx->rsize is zero.
Reported-by: Steve French <stfrench@microsoft.com>
Fixes: c59f7c9661b9 ("smb: client: ensure aligned IO sizes")
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The response buffer for the CREATE request handled by smb311_posix_mkdir()
is leaked on the error path (goto err_free_rsp_buf) because the structure
pointer *rsp passed to free_rsp_buf() is not assigned until *after* the
error condition is checked.
As *rsp is initialised to NULL, free_rsp_buf() becomes a no-op and the leak
is instead reported by __kmem_cache_shutdown() upon subsequent rmmod of
cifs.ko if (and only if) the error path has been hit.
Pass rsp_iov.iov_base to free_rsp_buf() instead, similar to the code in
other functions in smb2pdu.c for which *rsp is assigned late.
Cc: stable@vger.kernel.org
Signed-off-by: Jethro Donaldson <devel@jro.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Adds support for a revision of the Turtle Beach Recon Wired Controller,
the Turtle Beach Stealth Ultra, and the PowerA Wired Controller.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250513225950.2719387-1-vi@endrift.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
fsck_err() needs the btree transaction passed to it if there is one - so
that it can unlock/relock around prompting userspace for fixing the
error.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Fsck wants to do transaction commits from an outer context; it may have
other repair to do (i.e. duplicate backpointers).
But when calling backpointer_not_found() from runtime code, i.e. runtime
self healing, we should be doing the commit - the outer context expects
to just be doing lookups.
This fixes bugs where we get stuck spinning, reported as "RCU lock hold
time warnings.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Since bch2_seek_pagecache_data() searches for dirty data, we only want
to call it for holes in the extents btree - otherwise we have an
accidental O(n^2), as we repeatedly search the same range.
Reported-by: Marcin Mirosław <marcin@mejor.pl>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
set_should_be_locked() needs to be called before peek_key_cache(), which
traverses other paths and may do a trans unlock/relock.
This fixes an assertion pop in path_peek_slot(), when the path we're
using is unexpectedly not uptodate.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Before invoking bch2_accounting_mem_mod_locked in
bch2_gc_accounting_done, we already write locked mark_lock,
in bch2_accounting_mem_insert, we lock mark_lock again.
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Prevent jobs that do lots of scanning (i.e. evacuatee, scrub) from
causing OOMs.
The shrinker code seems to be having issues when it doesn't do any
freeing because it's just flipping off the acccessed bit - and the
accessed bit shouldn't be set on first use anyways.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When the journal is low on space, we might do discards from
journal_res_get() -> journal_entry_open().
Make sure we set j->can_discard correctly, so that if we're low on space
but not because discards aren't keeping up we don't livelock.
Fixes: 8e4d28036c29 ("bcachefs: Don't aggressively discard the journal")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This fixes btree locking assert pops users were seeing during evacuate:
https://github.com/koverstreet/bcachefs/issues/878
May 09 22:45:02 sharon kernel: bcachefs (68116e25-fa2d-4c6f-86c7-e8b431d792ae): bch2_btree_insert_node(): node not locked at level 1
May 09 22:45:02 sharon kernel: bch2_btree_node_rewrite [bcachefs]: watermark=btree no_check_rw alloc l=0-1 mode=none nodes_written=0 cl.remaining=2 journal_seq=0
May 09 22:45:02 sharon kernel: path: idx 1 ref 1:0 S B btree=alloc level=0 pos 0:3699637:0 0:3698012:1-0:3699637:0 bch2_move_btree.isra.0+0x1db/0x490 [bcachefs] uptodate 0 locks_want 2
May 09 22:45:02 sharon kernel: l=0 locks intent seq 4 node ffff8bd700c93600
May 09 22:45:02 sharon kernel: l=1 locks unlocked seq 1712 node ffff8bd6fd5e7a00
May 09 22:45:02 sharon kernel: l=2 locks unlocked seq 2295 node ffff8bd6cc725400
May 09 22:45:02 sharon kernel: l=3 locks unlocked seq 0 node 0000000000000000
Evacuate walks btree nodes with bch2_btree_iter_next_node() and rewrites
them, bch2_btree_update_start() upgrades the path to take intent locks
as far as it needs to.
But next_node() does low level unlock/relock calls on individual nodes,
and didn't handle the case where a path is supposed to be holding
multiple intent locks. If a path has locks_want > 1, it needs to be
either holding locks on all the btree nodes (at each level) requested,
or none of them.
Fix this with a bch2_btree_path_downgrade().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Fix bch2_bkey_clear_needs_rebalance(): indirect extents are never
supposed to have bch_extent_rebalance stripped off, because that's how
we get the IO path options when we don't have the original inode it
belonged to.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
