summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-07-20arm64: perf: Add cap_user_time_shortPeter Zijlstra
This completes the ARM64 cap_user_time support. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Leo Yan <leo.yan@linaro.org> Link: https://lore.kernel.org/r/20200716051130.4359-7-leo.yan@linaro.org Signed-off-by: Will Deacon <will@kernel.org>
2020-07-20perf: Add perf_event_mmap_page::cap_user_time_short ABIPeter Zijlstra
In order to support short clock counters, provide an ABI extension. As a whole: u64 time, delta, cyc = read_cycle_counter(); + if (cap_user_time_short) + cyc = time_cycle + ((cyc - time_cycle) & time_mask); delta = mul_u64_u32_shr(cyc, time_mult, time_shift); if (cap_user_time_zero) time = time_zero + delta; delta += time_offset; Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Leo Yan <leo.yan@linaro.org> Link: https://lore.kernel.org/r/20200716051130.4359-6-leo.yan@linaro.org Signed-off-by: Will Deacon <will@kernel.org>
2020-07-20arm64: perf: Only advertise cap_user_time for arch_timerPeter Zijlstra
When sched_clock is running on anything other than arch_timer, don't advertise cap_user_time*. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Leo Yan <leo.yan@linaro.org> Link: https://lore.kernel.org/r/20200716051130.4359-5-leo.yan@linaro.org Requested-by: Will Deacon <will@kernel.org> Signed-off-by: Will Deacon <will@kernel.org>
2020-07-20arm64: perf: Implement correct cap_user_timePeter Zijlstra
As reported by Leo; the existing implementation is broken when the clock and counter don't intersect at 0. Use the sched_clock's struct clock_read_data information to correctly implement cap_user_time and cap_user_time_zero. Note that the ARM64 counter is architecturally only guaranteed to be 56bit wide (implementations are allowed to be wider) and the existing perf ABI cannot deal with wrap-around. This implementation should also be faster than the old; seeing how we don't need to recompute mult and shift all the time. [leoyan: Use mul_u64_u32_shr() to convert cyc to ns to avoid overflow] Reported-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Leo Yan <leo.yan@linaro.org> Link: https://lore.kernel.org/r/20200716051130.4359-4-leo.yan@linaro.org Signed-off-by: Will Deacon <will@kernel.org>
2020-07-20time/sched_clock: Use raw_read_seqcount_latch()Ahmed S. Darwish
sched_clock uses seqcount_t latching to switch between two storage places protected by the sequence counter. This allows it to have interruptible, NMI-safe, seqcount_t write side critical sections. Since 7fc26327b756 ("seqlock: Introduce raw_read_seqcount_latch()"), raw_read_seqcount_latch() became the standardized way for seqcount_t latch read paths. Due to the dependent load, it also has one read memory barrier less than the currently used raw_read_seqcount() API. Use raw_read_seqcount_latch() for the seqcount_t latch read path. Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Leo Yan <leo.yan@linaro.org> Link: https://lkml.kernel.org/r/20200625085745.GD117543@hirez.programming.kicks-ass.net Link: https://lkml.kernel.org/r/20200715092345.GA231464@debian-buster-darwi.lab.linutronix.de Link: https://lore.kernel.org/r/20200716051130.4359-3-leo.yan@linaro.org References: 1809bfa44e10 ("timers, sched/clock: Avoid deadlock during read from NMI") Signed-off-by: Will Deacon <will@kernel.org>
2020-07-20sched_clock: Expose struct clock_read_dataPeter Zijlstra
In order to support perf_event_mmap_page::cap_time features, an architecture needs, aside from a userspace readable counter register, to expose the exact clock data so that userspace can convert the counter register into a correct timestamp. Provide struct clock_read_data and two (seqcount) helpers so that architectures (arm64 in specific) can expose the numbers to userspace. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Leo Yan <leo.yan@linaro.org> Link: https://lore.kernel.org/r/20200716051130.4359-2-leo.yan@linaro.org Signed-off-by: Will Deacon <will@kernel.org>
2020-07-20arm64: perf: Correct the event index in sysfsShaokun Zhang
When PMU event ID is equal or greater than 0x4000, it will be reduced by 0x4000 and it is not the raw number in the sysfs. Let's correct it and obtain the raw event ID. Before this patch: cat /sys/bus/event_source/devices/armv8_pmuv3_0/events/sample_feed event=0x001 After this patch: cat /sys/bus/event_source/devices/armv8_pmuv3_0/events/sample_feed event=0x4001 Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Cc: Will Deacon <will@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1592487344-30555-3-git-send-email-zhangshaokun@hisilicon.com [will: fixed formatting of 'if' condition] Signed-off-by: Will Deacon <will@kernel.org>
2020-07-20zonefs: count pages after truncating the iteratorJohannes Thumshirn
Count pages after possibly truncating the iterator to the maximum zone append size, not before. Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
2020-07-20zonefs: Fix compilation warningDamien Le Moal
Avoid the compilation warning "Variable 'ret' is reassigned a value before the old one has been used." in zonefs_create_zgroup() by setting ret for the error path only if an error happens. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
2020-07-20s390/bpf: implement BPF_PROBE_MEMIlya Leoshkevich
This is a s390 port of x86 commit 3dec541b2e63 ("bpf: Add support for BTF pointers to x86 JIT"). Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-20s390/kernel: expand exception table logic to allow new handling optionsIlya Leoshkevich
This is a s390 port of commit 548acf19234d ("x86/mm: Expand the exception table logic to allow new handling options"), which is needed for implementing BPF_PROBE_MEM on s390. The new handler field is made 64-bit in order to allow pointing from dynamically allocated entries to handlers in kernel text. Unlike on x86, NULL is used instead of ex_handler_default. This is because exception tables are used by boot/text_dma.S, and it would be a pain to preserve ex_handler_default. The new infrastructure is ignored in early_pgm_check_handler, since there is no pt_regs. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-20s390/kernel: unify EX_TABLE* implementationsIlya Leoshkevich
Replace three implementations with one using using __stringify_in_c macro conveniently "borrowed" from powerpc and microblaze. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-20s390/mm: allow order 10 allocationsHeiko Carstens
Get rid of FORCE_MAX_ZONEORDER which limited allocations to order 8 (= 1MB) and use the default, which allows for order 10 (= 4MB) allocations. Given that s390 allows less than the default this caused some memory allocation problems more or less unique to s390 from time to time. Note: this was originally introduced with commit 684de39bd795 ("[S390] Fix IPL from NSS.") in order to support Named Saved Segments, which could start/end at an arbitrary 1 megabyte boundary and also before support for sparsemem vmemmmap was enabled. Since NSS support is gone, but sparsemem vmemmap support is available this limitation can go away. Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-20s390/mm: avoid trimming to MAX_ORDERHeiko Carstens
Trimming to MAX_ORDER was originally done in order to avoid to set HOLES_IN_ZONE, which in turn would enable a quite expensive pfn_valid() check. pfn_valid() however only checks if a struct page exists for a given pfn. With sparsemen vmemmap there are always struct pages, since memmaps are allocated for whole sections. Therefore remove the HOLES_IN_ZONE comment and the trimming. Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-20s390/qdio: remove internal polling in non-thinint pathJulian Wiedmann
For non-thinint devices in LPAR, qdio polls an idle Input Queue for a little while to catch more work. But platform support for thinints has been around practically _forever_ by now, so this micro-optimization is seeing 0 actual use. Remove it to reduce the overall complexity of the hot path. In the meantime we also grew support for driver-level polling (eg. NAPI in qeth), so it's quite questionable how useful this would actually be on current kernels. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-20s390/qdio: allow to scan all 128 Input SBALsJulian Wiedmann
The comment is inaccurate, qdio_inbound_q_moved() and/or its callers no longer get confused by a count of 128 completed SBALs. Scanning all 128 SBALs at once can improve IRQ reduction (as we now place the ACK at the right spot), and reduce the amount of processing needed to handle all completed SBALs. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-20s390/qdio: fix statistics for 128 SBALsJulian Wiedmann
Old code would only scan up to 127 SBALs at once. So the last statistics bucket was set aside to count "discovered 127 SBALs with new work" events. But nowadays we allow to scan all 128 SBALs for Output Queues, and a subsequent patch will introduce the same for Input Queues. So fix up the accounting to use the last bucket only when all 128 SBALs have been discovered with new work. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-20s390/mm: fix typo in commentHeiko Carstens
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-20staging: comedi: addi_apci_1564: check INSN_CONFIG_DIGITAL_TRIG shiftIan Abbott
The `INSN_CONFIG` comedi instruction with sub-instruction code `INSN_CONFIG_DIGITAL_TRIG` includes a base channel in `data[3]`. This is used as a right shift amount for other bitmask values without being checked. Shift amounts greater than or equal to 32 will result in undefined behavior. Add code to deal with this. Fixes: 1e15687ea472 ("staging: comedi: addi_apci_1564: add Change-of-State interrupt subdevice and required functions") Cc: <stable@vger.kernel.org> #3.17+ Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20200717145257.112660-4-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-20staging: comedi: addi_apci_1500: check INSN_CONFIG_DIGITAL_TRIG shiftIan Abbott
The `INSN_CONFIG` comedi instruction with sub-instruction code `INSN_CONFIG_DIGITAL_TRIG` includes a base channel in `data[3]`. This is used as a right shift amount for other bitmask values without being checked. Shift amounts greater than or equal to 32 will result in undefined behavior. Add code to deal with this, adjusting the checks for invalid channels so that enabled channel bits that would have been lost by shifting are also checked for validity. Only channels 0 to 15 are valid. Fixes: a8c66b684efaf ("staging: comedi: addi_apci_1500: rewrite the subdevice support functions") Cc: <stable@vger.kernel.org> #4.0+: ef75e14a6c93: staging: comedi: verify array index is correct before using it Cc: <stable@vger.kernel.org> #4.0+ Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20200717145257.112660-5-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-20staging: comedi: addi_apci_1032: check INSN_CONFIG_DIGITAL_TRIG shiftIan Abbott
The `INSN_CONFIG` comedi instruction with sub-instruction code `INSN_CONFIG_DIGITAL_TRIG` includes a base channel in `data[3]`. This is used as a right shift amount for other bitmask values without being checked. Shift amounts greater than or equal to 32 will result in undefined behavior. Add code to deal with this. Fixes: 33cdce6293dcc ("staging: comedi: addi_apci_1032: conform to new INSN_CONFIG_DIGITAL_TRIG") Cc: <stable@vger.kernel.org> #3.8+ Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20200717145257.112660-3-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-20staging: comedi: ni_6527: fix INSN_CONFIG_DIGITAL_TRIG supportIan Abbott
`ni6527_intr_insn_config()` processes `INSN_CONFIG` comedi instructions for the "interrupt" subdevice. When `data[0]` is `INSN_CONFIG_DIGITAL_TRIG` it is configuring the digital trigger. When `data[2]` is `COMEDI_DIGITAL_TRIG_ENABLE_EDGES` it is configuring rising and falling edge detection for the digital trigger, using a base channel number (or shift amount) in `data[3]`, a rising edge bitmask in `data[4]` and falling edge bitmask in `data[5]`. If the base channel number (shift amount) is greater than or equal to the number of channels (24) of the digital input subdevice, there are no changes to the rising and falling edges, so the mask of channels to be changed can be set to 0, otherwise the mask of channels to be changed, and the rising and falling edge bitmasks are shifted by the base channel number before calling `ni6527_set_edge_detection()` to change the appropriate registers. Unfortunately, the code is comparing the base channel (shift amount) to the interrupt subdevice's number of channels (1) instead of the digital input subdevice's number of channels (24). Fix it by comparing to 32 because all shift amounts for an `unsigned int` must be less than that and everything from bit 24 upwards is ignored by `ni6527_set_edge_detection()` anyway. Fixes: 110f9e687c1a8 ("staging: comedi: ni_6527: support INSN_CONFIG_DIGITAL_TRIG") Cc: <stable@vger.kernel.org> # 3.17+ Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20200717145257.112660-2-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-20Merge tag 'misc-habanalabs-fixes-2020-07-19' of ↵Greg Kroah-Hartman
git://people.freedesktop.org/~gabbayo/linux into char-misc-linus Oded writes: This tag contains a single bug fix for 5.8-rc7: - Check that an index is in valid range before using it to access an array. The index is received from the user. This is to prevent a possible out-of-bounds access error. * tag 'misc-habanalabs-fixes-2020-07-19' of git://people.freedesktop.org/~gabbayo/linux: habanalabs: prevent possible out-of-bounds array access
2020-07-20Merge tag 'fpga-late-fixes-for-5.8' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga into char-misc-linus Moritz writes: FPGA manager fixes for 5.8 Here are two (late) dfl fixes for the the 5.8 release. Matthew's fix addresses an issue in the reset of a port. Xu'x fix addresses a linter warning. All patches have been reviewed on the mailing list, and have been in the last few linux-next releases (as part of my fixes branch) without issues. Signed-off-by: Moritz Fischer <mdf@kernel.org> * tag 'fpga-late-fixes-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga: fpga: dfl: fix bug in port reset handshake fpga: dfl: pci: reduce the scope of variable 'ret'
2020-07-20net: ieee802154: adf7242: Replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Link: https://lore.kernel.org/r/20200719113142.58304-1-grandmaster@al2klimov.de Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2020-07-20ARM: dts: imx6qdl-icore: Fix OTG_ID pin and sdcard detectMichael Trimarchi
The current pin muxing scheme muxes GPIO_1 pad for USB_OTG_ID because of which when card is inserted, usb otg is enumerated and the card is never detected. [ 64.492645] cfg80211: failed to load regulatory.db [ 64.492657] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 76.343711] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 76.349742] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 2 [ 76.388862] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 76.396650] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08 [ 76.405412] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 76.412763] usb usb2: Product: EHCI Host Controller [ 76.417666] usb usb2: Manufacturer: Linux 5.8.0-rc1-next-20200618 ehci_hcd [ 76.424623] usb usb2: SerialNumber: ci_hdrc.0 [ 76.431755] hub 2-0:1.0: USB hub found [ 76.435862] hub 2-0:1.0: 1 port detected The TRM mentions GPIO_1 pad should be muxed/assigned for card detect and ENET_RX_ER pad for USB_OTG_ID for proper operation. This patch fixes pin muxing as per TRM and is tested on a i.Core 1.5 MX6 DL SOM. [ 22.449165] mmc0: host does not support reading read-only switch, assuming write-enable [ 22.459992] mmc0: new high speed SDHC card at address 0001 [ 22.469725] mmcblk0: mmc0:0001 EB1QT 29.8 GiB [ 22.478856] mmcblk0: p1 p2 Fixes: 6df11287f7c9 ("ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual initial support") Cc: stable@vger.kernel.org Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-20ARM: dts: imx6sx-sabreauto: Fix the phy-mode on fec2Fabio Estevam
Commit 0672d22a1924 ("ARM: dts: imx: Fix the AR803X phy-mode") fixed the phy-mode for fec1, but missed to fix it for the fec2 node. Fix fec2 to also use "rgmii-id" as the phy-mode. Cc: <stable@vger.kernel.org> Fixes: 0672d22a1924 ("ARM: dts: imx: Fix the AR803X phy-mode") Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-20ARM: dts: imx6sx-sdb: Fix the phy-mode on fec2Fabio Estevam
Commit 0672d22a1924 ("ARM: dts: imx: Fix the AR803X phy-mode") fixed the phy-mode for fec1, but missed to fix it for the fec2 node. Fix fec2 to also use "rgmii-id" as the phy-mode. Cc: <stable@vger.kernel.org> Fixes: 0672d22a1924 ("ARM: dts: imx: Fix the AR803X phy-mode") Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-19bonding: check error value of register_netdevice() immediatelyTaehee Yoo
If register_netdevice() is failed, net_device should not be used because variables are uninitialized or freed. So, the routine should be stopped immediately. But, bond_create() doesn't check return value of register_netdevice() immediately. That will result in a panic because of using uninitialized or freed memory. Test commands: modprobe netdev-notifier-error-inject echo -22 > /sys/kernel/debug/notifier-error-inject/netdev/\ actions/NETDEV_REGISTER/error modprobe bonding max_bonds=3 Splat looks like: [ 375.028492][ T193] general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b6b: 0000 [#1] SMP DEBUG_PAGEALLOC PTI [ 375.033207][ T193] CPU: 2 PID: 193 Comm: kworker/2:2 Not tainted 5.8.0-rc4+ #645 [ 375.036068][ T193] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 375.039673][ T193] Workqueue: events linkwatch_event [ 375.041557][ T193] RIP: 0010:dev_activate+0x4a/0x340 [ 375.043381][ T193] Code: 40 a8 04 0f 85 db 00 00 00 8b 83 08 04 00 00 85 c0 0f 84 0d 01 00 00 31 d2 89 d0 48 8d 04 40 48 c1 e0 07 48 03 83 00 04 00 00 <48> 8b 48 10 f6 41 10 01 75 08 f0 80 a1 a0 01 00 00 fd 48 89 48 08 [ 375.050267][ T193] RSP: 0018:ffff9f8facfcfdd8 EFLAGS: 00010202 [ 375.052410][ T193] RAX: 6b6b6b6b6b6b6b6b RBX: ffff9f8fae6ea000 RCX: 0000000000000006 [ 375.055178][ T193] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9f8fae6ea000 [ 375.057762][ T193] RBP: ffff9f8fae6ea000 R08: 0000000000000000 R09: 0000000000000000 [ 375.059810][ T193] R10: 0000000000000001 R11: 0000000000000000 R12: ffff9f8facfcfe08 [ 375.061892][ T193] R13: ffffffff883587e0 R14: 0000000000000000 R15: ffff9f8fae6ea580 [ 375.063931][ T193] FS: 0000000000000000(0000) GS:ffff9f8fbae00000(0000) knlGS:0000000000000000 [ 375.066239][ T193] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 375.067841][ T193] CR2: 00007f2f542167a0 CR3: 000000012cee6002 CR4: 00000000003606e0 [ 375.069657][ T193] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 375.071471][ T193] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 375.073269][ T193] Call Trace: [ 375.074005][ T193] linkwatch_do_dev+0x4d/0x50 [ 375.075052][ T193] __linkwatch_run_queue+0x10b/0x200 [ 375.076244][ T193] linkwatch_event+0x21/0x30 [ 375.077274][ T193] process_one_work+0x252/0x600 [ 375.078379][ T193] ? process_one_work+0x600/0x600 [ 375.079518][ T193] worker_thread+0x3c/0x380 [ 375.080534][ T193] ? process_one_work+0x600/0x600 [ 375.081668][ T193] kthread+0x139/0x150 [ 375.082567][ T193] ? kthread_park+0x90/0x90 [ 375.083567][ T193] ret_from_fork+0x22/0x30 Fixes: e826eafa65c6 ("bonding: Call netif_carrier_off after register_netdevice") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19arm64: dts: clearfog-gt-8k: fix switch link configurationRussell King
The commit below caused a regression for clearfog-gt-8k, where the link between the switch and the host does not come up. Investigation revealed two issues: - MV88E6xxx DSA no longer allows an in-band link to come up as the link is programmed to be forced down. Commit "net: dsa: mv88e6xxx: fix in-band AN link establishment" addresses this. - The dts configured dissimilar link modes at each end of the host to switch link; the host was configured using a fixed link (so has no in-band status) and the switch was configured to expect in-band status. With both issues fixed, the regression is resolved. Fixes: 34b5e6a33c1a ("net: dsa: mv88e6xxx: Configure MAC when using fixed link") Reported-by: Martin Rowe <martin.p.rowe@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net: dsa: mv88e6xxx: fix in-band AN link establishmentRussell King
If in-band negotiation or fixed-link modes are specified for a DSA port, the DSA code will force the link down during initialisation. For fixed-link mode, this is fine, as phylink will manage the link state. However, for in-band mode, phylink expects the PCS to detect link, which will not happen if the link is forced down. There is a related issue that in in-band mode, the link could come up while we are making configuration changes, so we should force the link down prior to reconfiguring the interface mode. This patch addresses both issues. Fixes: 3be98b2d5fbc ("net: dsa: Down cpu/dsa ports phylink will control") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20drm/lima: fix wait pp reset timeoutQiang Yu
PP bcast is marked as doing async reset after job is done. When resume after suspend, each PP is reset individually, so no need to reset in PP bcast resume. But I forgot to clear the PP bcast async reset mark so call into async wait before job run and gets timeout. Closes: https://gitlab.freedesktop.org/lima/linux/-/issues/34 Fixes: 3446d7e9883d ("drm/lima: add resume/suspend callback for each ip") Reviewed-by: Erico Nunes <nunes.erico@gmail.com> Signed-off-by: Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200719073050.776962-1-yuq825@gmail.com
2020-07-19copy_xstate_to_kernel: Fix typo which caused GDB regressionKevin Buettner
This fixes a regression encountered while running the gdb.base/corefile.exp test in GDB's test suite. In my testing, the typo prevented the sw_reserved field of struct fxregs_state from being output to the kernel XSAVES area. Thus the correct mask corresponding to XCR0 was not present in the core file for GDB to interrogate, resulting in the following behavior: [kev@f32-1 gdb]$ ./gdb -q testsuite/outputs/gdb.base/corefile/corefile testsuite/outputs/gdb.base/corefile/corefile.core Reading symbols from testsuite/outputs/gdb.base/corefile/corefile... [New LWP 232880] warning: Unexpected size of section `.reg-xstate/232880' in core file. With the typo fixed, the test works again as expected. Signed-off-by: Kevin Buettner <kevinb@redhat.com> Fixes: 9e4636545933 ("copy_xstate_to_kernel(): don't leave parts of destination uninitialized") Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-07-19Linux 5.8-rc6v5.8-rc6Linus Torvalds
2020-07-19Merge branch 'net-smc-fixes'David S. Miller
Karsten Graul says: ==================== net/smc: fixes 2020-07-16 Please apply the following patch series for smc to netdev's net tree. The patches address problems caused by late or unexpected link layer control packets, dma sync calls for unmapped memory, freed buffers that are not removed from the buffer list and a possible null pointer access that results in a crash. v1->v2: in patch 4, improve patch description and correct the comment for the new mutex ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net/smc: fix restoring of fallback changesKarsten Graul
When a listen socket is closed then all non-accepted sockets in its accept queue are to be released. Inside __smc_release() the helper smc_restore_fallback_changes() restores the changes done to the socket without to check if the clcsocket has a file set. This can result in a crash. Fix this by checking the file pointer first. Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Fixes: f536dffc0b79 ("net/smc: fix closing of fallback SMC sockets") Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net/smc: remove freed buffer from listKarsten Graul
Two buffers are allocated for each SMC connection. Each buffer is added to a buffer list after creation. When the second buffer allocation fails, the first buffer is freed but not deleted from the list. This might result in crashes when another connection picks up the freed buffer later and starts to work with it. Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Fixes: 6511aad3f039 ("net/smc: change smc_buf_free function parameters") Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net/smc: do not call dma sync for unmapped memoryKarsten Graul
The dma related ...sync_sg... functions check the link state before the dma function is actually called. But the check in smc_link_usable() allows links in ACTIVATING state which are not yet mapped to dma memory. Under high load it may happen that the sync_sg functions are called for such a link which results in an debug output like DMA-API: mlx5_core 0002:00:00.0: device driver tries to sync DMA memory it has not allocated [device address=0x0000000103370000] [size=65536 bytes] To fix that introduce a helper to check for the link state ACTIVE and use it where appropriate. And move the link state update to ACTIVATING to the end of smcr_link_init() when most initial setup is done. Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Fixes: d854fcbfaeda ("net/smc: add new link state and related helpers") Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net/smc: fix handling of delete link requestsKarsten Graul
As smc client the delete link requests are assigned to the flow when _any_ flow is active. This may break other flows that do not expect delete link requests during their handling. Fix that by assigning the request only when an add link flow is active. With that fix the code for smc client and smc server is the same, so remove the separate handling. Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Fixes: 9ec6bf19ec8b ("net/smc: llc_del_link_work and use the LLC flow for delete link") Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net/smc: move add link processing for new device into llc layerKarsten Graul
When a new ib device is up smc will send an add link invitation to the peer if needed. This is currently done with rudimentary flow control. Under high workload these add link invitations can disturb other llc flows because they arrive unexpected. Fix this by integrating the invitations into the normal llc event flow and handle them as a flow. While at it, check for already assigned requests in the flow before the new add link request is assigned. Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Fixes: 1f90a05d9ff9 ("net/smc: add smcr_port_add() and smcr_link_up() processing") Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net/smc: drop out-of-flow llc response messagesKarsten Graul
To be save from unexpected or late llc response messages check if the arrived message fits to the current flow type and drop out-of-flow messages. And drop it when there is already a response assigned to the flow. Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Fixes: ef79d439cd12 ("net/smc: process llc responses in tasklet context") Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net/smc: protect smc ib device initializationKarsten Graul
Before an smc ib device is used the first time for an smc link it is lazily initialized. When there are 2 active link groups and a new ib device is brought online then it might happen that 2 link creations run in parallel and enter smc_ib_setup_per_ibdev(). Both allocate new send and receive completion queues on the device, but only one set of them keeps assigned and the other leaks. Fix that by protecting the setup and cleanup code using a mutex. Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Fixes: f3c1deddb21c ("net/smc: separate function for link initialization") Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net/smc: fix link lookup for new rdma connectionsKarsten Graul
For new rdma connections the SMC server assigns the link and sends the link data in the clc accept message. To match the correct link use not only the qp_num but also the gid and the mac of the links. If there are equal qp_nums for different links the wrong link would be chosen. Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Fixes: 0fb0b02bd6fd ("net/smc: adapt SMC client code to use the LLC flow") Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net/smc: clear link during SMC client link down processingKarsten Graul
In a link-down condition we notify the SMC server and expect that the server will finally trigger the link clear processing on the client side. This could fail when anything along this notification path goes wrong. Clear the link as part of SMC client link-down processing to prevent dangling links. Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Fixes: 541afa10c126 ("net/smc: add smcr_port_err() and smcr_link_down() processing") Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net/smc: handle unexpected response types for confirm linkKarsten Graul
A delete link could arrive during confirm link processing. Handle this situation directly in smc_llc_srv_conf_link() rather than using the logic in smc_llc_wait() to avoid the unexpected message handling there. Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Fixes: 1551c95b6124 ("net/smc: final part of add link processing as SMC server") Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19Merge tag 'perf-tools-fixes-2020-07-19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into master Pull perf tooling fixes from Arnaldo Carvalho de Melo: - Update hashmap.h from libbpf and kvm.h from x86's kernel UAPI. - Set opt->set in libsubcmd's OPT_CALLBACK_SET(). This fixes 'perf record --switch-output-event event-name' usage" * tag 'perf-tools-fixes-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: tools arch kvm: Sync kvm headers with the kernel sources perf tools: Sync hashmap.h with libbpf's libsubcmd: Fix OPT_CALLBACK_SET()
2020-07-19Merge tag 'x86-urgent-2020-07-19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master Pull x86 fixes from Thomas Gleixner: "A pile of fixes for x86: - Fix the I/O bitmap invalidation on XEN PV, which was overlooked in the recent ioperm/iopl rework. This caused the TSS and XEN's I/O bitmap to get out of sync. - Use the proper vectors for HYPERV. - Make disabling of stack protector for the entry code work with GCC builds which enable stack protector by default. Removing the option is not sufficient, it needs an explicit -fno-stack-protector to shut it off. - Mark check_user_regs() noinstr as it is called from noinstr code. The missing annotation causes it to be placed in the text section which makes it instrumentable. - Add the missing interrupt disable in exc_alignment_check() - Fixup a XEN_PV build dependency in the 32bit entry code - A few fixes to make the Clang integrated assembler happy - Move EFI stub build to the right place for out of tree builds - Make prepare_exit_to_usermode() static. It's not longer called from ASM code" * tag 'x86-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot: Don't add the EFI stub to targets x86/entry: Actually disable stack protector x86/ioperm: Fix io bitmap invalidation on Xen PV x86: math-emu: Fix up 'cmp' insn for clang ias x86/entry: Fix vectors to IDTENTRY_SYSVEC for CONFIG_HYPERV x86/entry: Add compatibility with IAS x86/entry/common: Make prepare_exit_to_usermode() static x86/entry: Mark check_user_regs() noinstr x86/traps: Disable interrupts in exc_aligment_check() x86/entry/32: Fix XEN_PV build dependency
2020-07-19Merge tag 'timers-urgent-2020-07-19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master Pull timer fixes from Thomas Gleixner: "Two fixes for the timer wheel: - A timer which is already expired at enqueue time can set the base->next_expiry value backwards. As a consequence base->clk can be set back as well. This can lead to timers expiring early. Add a sanity check to prevent this. - When a timer is queued with an expiry time beyond the wheel capacity then it should be queued in the bucket of the last wheel level which is expiring last. The code adjusted the expiry time to the maximum wheel capacity, which is only correct when the wheel clock is 0. Aside of that the check whether the delta is larger than wheel capacity does not check the delta, it checks the expiry value itself. As a result timers can expire at random. Fix this by checking the right variable and adjust expiry time so it becomes base->clock plus capacity which places it into the outmost bucket in the last wheel level" * tag 'timers-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timer: Fix wheel index calculation on last level timer: Prevent base->clk from moving backward
2020-07-19Merge tag 'sched-urgent-2020-07-19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master Pull scheduler fixes from Thomas Gleixner: "A set of scheduler fixes: - Plug a load average accounting race which was introduced with a recent optimization casing load average to show bogus numbers. - Fix the rseq CPU id initialization for new tasks. sched_fork() does not update the rseq CPU id so the id is the stale id of the parent task, which can cause user space data corruption. - Handle a 0 return value of task_h_load() correctly in the load balancer, which does not decrease imbalance and therefore pulls until the maximum number of loops is reached, which might be all tasks just created by a fork bomb" * tag 'sched-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: handle case of task_h_load() returning 0 sched: Fix unreliable rseq cpu_id for new tasks sched: Fix loadavg accounting race
2020-07-19Merge tag 'irq-urgent-2020-07-19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master Pull irq fixes from Thomas Gleixner: "Two fixes for the interrupt subsystem: - Make the handling of the firmware node consistent and do not free the node after the domain has been created successfully. The core code stores a pointer to it which can lead to a use after free or double free. This used to "work" because the pointer was not stored when the initial code was written, but at some point later it was required to store it. Of course nobody noticed that the existing users break that way. - Handle affinity setting on inactive interrupts correctly when hierarchical irq domains are enabled. When interrupts are inactive with the modern hierarchical irqdomain design, the interrupt chips are not necessarily in a state where affinity changes can be handled. The legacy irq chip design allowed this because interrupts are immediately fully initialized at allocation time. X86 has a hacky workaround for this, but other implementations do not. This cased malfunction on GIC-V3. Instead of playing whack a mole to find all affected drivers, change the core code to store the requested affinity setting and then establish it when the interrupt is allocated, which makes the X86 hack go away" * tag 'irq-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/affinity: Handle affinity setting on inactive interrupts correctly irqdomain/treewide: Keep firmware node unconditionally allocated
generated by cgit (git 2.34.1) at 2025-09-15 00:53:40 +0000