| Age | Commit message (Collapse) | Author |
|---|
|
The mechanism to save/restore MSRs during S3 suspend/resume checks for
the MSR validity during suspend, and only restores the MSR if its a
valid MSR. This is not optimal, as an invalid MSR will unnecessarily
throw an exception for every suspend cycle. The more invalid MSRs,
higher the impact will be.
Check and save the MSR validity at setup. This ensures that only valid
MSRs that are guaranteed to not throw an exception will be attempted
during suspend.
Fixes: 7a9c2dd08ead ("x86/pm: Introduce quirk framework to save/restore extra MSR registers around suspend/resume")
Suggested-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently when XDP rings are created, each descriptor gets its DD bit
set, which turns out to be the wrong approach as it can lead to a
situation where more descriptors get cleaned than it was supposed to,
e.g. when AF_XDP busy poll is run with a large batch size. In this
situation, the driver would request for more buffers than it is able to
handle.
Fix this by not setting the DD bits in ice_xdp_alloc_setup_rings(). They
should be initialized to zero instead.
Fixes: 9610bd988df9 ("ice: optimize XDP_TX workloads")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Shwetha Nagaraju <shwetha.nagaraju@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
ICE_DOWN is dedicated for pf->state. Check for ICE_VSI_DOWN being set on
vsi->state in ice_xsk_wakeup().
Fixes: 2d4238f55697 ("ice: Add support for AF_XDP")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Shwetha Nagaraju <shwetha.nagaraju@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Unfortunately, the ice driver doesn't respect the RCU critical section that
XSK wakeup is surrounded with. To fix this, add synchronize_rcu() calls to
paths that destroy resources that might be in use.
This was addressed in other AF_XDP ZC enabled drivers, for reference see
for example commit b3873a5be757 ("net/i40e: Fix concurrency issues
between config flow and XSK")
Fixes: efc2214b6047 ("ice: Add support for XDP")
Fixes: 2d4238f55697 ("ice: Add support for AF_XDP")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Shwetha Nagaraju <shwetha.nagaraju@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- prevent deleting subvolume with active swapfile
- fix qgroup reserve limit calculation overflow
- remove device count in superblock and its item in one transaction so
they cant't get out of sync
- skip defragmenting an isolated sector, this could cause some extra IO
- unify handling of mtime/permissions in hole punch with fallocate
- zoned mode fixes:
- remove assert checking for only single mode, we have the
DUP mode implemented
- fix potential lockdep warning while traversing devices
when checking for zone activation
* tag 'for-5.18-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: prevent subvol with swapfile from being deleted
btrfs: do not warn for free space inode in cow_file_range
btrfs: avoid defragging extents whose next extents are not targets
btrfs: fix fallocate to use file_modified to update permissions consistently
btrfs: remove device item and update super block in the same transaction
btrfs: fix qgroup reserve overflow the qgroup limit
btrfs: zoned: remove left over ASSERT checking for single profile
btrfs: zoned: traverse devices under chunk_mutex in btrfs_can_activate_zone
|
|
At the moment the GIC IRQ domain translation routine happily converts
ACPI table GSI numbers below 16 to GIC SGIs (Software Generated
Interrupts aka IPIs). On the Devicetree side we explicitly forbid this
translation, actually the function will never return HWIRQs below 16 when
using a DT based domain translation.
We expect SGIs to be handled in the first part of the function, and any
further occurrence should be treated as a firmware bug, so add a check
and print to report this explicitly and avoid lengthy debug sessions.
Fixes: 64b499d8df40 ("irqchip/gic-v3: Configure SGIs as standard interrupts")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220404110842.2882446-1-andre.przywara@arm.com
|
|
It turns out that our polling of RWP is totally wrong when checking
for it in the redistributors, as we test the *distributor* bit index,
whereas it is a different bit number in the RDs... Oopsie boo.
This is embarassing. Not only because it is wrong, but also because
it took *8 years* to notice the blunder...
Just fix the damn thing.
Fixes: 021f653791ad ("irqchip: gic-v3: Initial support for GICv3")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Link: https://lore.kernel.org/r/20220315165034.794482-2-maz@kernel.org
|
|
The way KVM drives GICv4.{0,1} is as follows:
- vcpu_load() makes the VPE resident, instructing the RD to start
scanning for interrupts
- just before entering the guest, we check that the RD has finished
scanning and that we can start running the vcpu
- on preemption, we deschedule the VPE by making it invalid on
the RD
However, we are preemptible between the first two steps. If it so
happens *and* that the RD was still scanning, we nonetheless write
to the GICR_VPENDBASER register while Dirty is set, and bad things
happen (we're in UNPRED land).
This affects both the 4.0 and 4.1 implementations.
Make sure Dirty is cleared before performing the deschedule,
meaning that its_clear_vpend_valid() becomes a sort of full VPE
residency barrier.
Reported-by: Jingyi Wang <wangjingyi11@huawei.com>
Tested-by: Nianyao Tang <tangnianyao@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Fixes: 57e3cebd022f ("KVM: arm64: Delay the polling of the GICR_VPENDBASER.Dirty bit")
Link: https://lore.kernel.org/r/4aae10ba-b39a-5f84-754b-69c2eb0a2c03@huawei.com
|
|
If devm_platform_ioremap_resource() fails, it never returns
NULL, replace NULL check with IS_ERR().
Fixes: a6199bb514d8 ("irqchip: Add Qualcomm MPM controller driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220316025100.1758413-1-yangyingliang@huawei.com
|
|
If MAILBOX is n, building fails:
drivers/irqchip/irq-qcom-mpm.o: In function `mpm_pd_power_off':
irq-qcom-mpm.c:(.text+0x174): undefined reference to `mbox_send_message'
irq-qcom-mpm.c:(.text+0x174): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `mbox_send_message'
Make QCOM_MPM depends on MAILBOX to fix this.
Fixes: a6199bb514d8 ("irqchip: Add Qualcomm MPM controller driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220317131956.30004-1-yuehaibing@huawei.com
|
|
In 6f98a4bfee72 ("random: block in /dev/urandom"), we tried to make a
successful try_to_generate_entropy() call *required* if the RNG was not
already initialized. Unfortunately, weird architectures and old
userspaces combined in TCG test harnesses, making that change still not
realistic, so it was reverted in 0313bc278dac ("Revert "random: block in
/dev/urandom"").
However, rather than making a successful try_to_generate_entropy() call
*required*, we can instead make it *best-effort*.
If try_to_generate_entropy() fails, it fails, and nothing changes from
the current behavior. If it succeeds, then /dev/urandom becomes safe to
use for free. This way, we don't risk the regression potential that led
to us reverting the required-try_to_generate_entropy() call before.
Practically speaking, this means that at least on x86, /dev/urandom
becomes safe. Probably other architectures with working cycle counters
will also become safe. And architectures with slow or broken cycle
counters at least won't be affected at all by this change.
So it may not be the glorious "all things are unified!" change we were
hoping for initially, but practically speaking, it makes a positive
impact.
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Now that all in-kernel users of default_attrs for the kobj_type are gone
and converted to properly use the default_groups pointer instead, it can
be safely removed.
There is one standard way to create sysfs files in a kobj_type, and not
two like before, causing confusion as to which should be used.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Link: https://lore.kernel.org/r/20220106133151.607703-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There are currently 2 ways to create a set of sysfs files for a
kobj_type, through the default_attrs field, and the default_groups
field. Move the pseries vas sysfs code to use default_groups field
which has been the preferred way since aa30f47cf666 ("kobject: Add
support for default attribute groups to kobj_type") so that we can soon
get rid of the obsolete default_attrs field.
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Haren Myneni <haren@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/20220329142552.558339-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The request to aqquire gem resources is failing for DSB in rare
scenario where it is busy and the register programming will be done
through mmio fallback path.
DSB has extra advantage of faster register programming which may
go away through mmio path. Adding wait for gem resource also may
not be right as anyways losing time.
To make the CI execution happy replaced drm_err() to drm_info()
for printing debug info during dsb buffer preparation.
v1: Initial version.
v2: Added print for mmio fallback at out label. [Nirmoy]
v3: Improved debug message. [Nirmoy]
Cc: Nirmoy Das <nirmoy.das@linux.intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220325161140.11906-1-animesh.manna@intel.com
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
|
|
VRF devices are the loopbacks for VRFs, and a loopback can not be
assigned to a VRF. Accordingly, the condition in ip6_pkt_drop should
be '||' not '&&'.
Fixes: 1d3fd8a10bed ("vrf: Use orig netdev to count Ip6InNoRoutes and a fresh route lookup when sending dest unreach")
Reported-by: Pudak, Filip <Filip.Pudak@windriver.com>
Reported-by: Xiao, Jiguang <Jiguang.Xiao@windriver.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220404150908.2937-1-dsahern@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Tony Nguyen says:
====================
ice bug fixes
Alice Michael says:
There were a couple of bugs that have been found and
fixed by Anatolii in the ice driver. First he fixed
a bug on ring creation by setting the default value
for the teid. Anatolli also fixed a bug with deleting
queues in ice_vc_dis_qs_msg based on their enablement.
---
v2: Remove empty lines between tags
The following are changes since commit 458f5d92df4807e2a7c803ed928369129996bf96:
sfc: Do not free an empty page_ring
and are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue 100GbE
====================
Link: https://lore.kernel.org/r/20220404183548.3422851-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Disable check for queue being enabled in ice_vc_dis_qs_msg, because
there could be a case when queues were created, but were not enabled.
We still need to delete those queues.
Normal workflow for VF looks like:
Enable path:
VIRTCHNL_OP_ADD_ETH_ADDR (opcode 10)
VIRTCHNL_OP_CONFIG_VSI_QUEUES (opcode 6)
VIRTCHNL_OP_ENABLE_QUEUES (opcode 8)
Disable path:
VIRTCHNL_OP_DISABLE_QUEUES (opcode 9)
VIRTCHNL_OP_DEL_ETH_ADDR (opcode 11)
The issue appears only in stress conditions when VF is enabled and
disabled very fast.
Eventually there will be a case, when queues are created by
VIRTCHNL_OP_CONFIG_VSI_QUEUES, but are not enabled by
VIRTCHNL_OP_ENABLE_QUEUES.
In turn, these queues are not deleted by VIRTCHNL_OP_DISABLE_QUEUES,
because there is a check whether queues are enabled in
ice_vc_dis_qs_msg.
When we bring up the VF again, we will see the "Failed to set LAN Tx queue
context" error during VIRTCHNL_OP_CONFIG_VSI_QUEUES step. This
happens because old 16 queues were not deleted and VF requests to create
16 more, but ice_sched_get_free_qparent in ice_ena_vsi_txq would fail to
find a parent node for first newly requested queue (because all nodes
are allocated to 16 old queues).
Testing Hints:
Just enable and disable VF fast enough, so it would be disabled before
reaching VIRTCHNL_OP_ENABLE_QUEUES.
while true; do
ip link set dev ens785f0v0 up
sleep 0.065 # adjust delay value for you machine
ip link set dev ens785f0v0 down
done
Fixes: 77ca27c41705 ("ice: add support for virtchnl_queue_select.[tx|rx]_queues bitmap")
Signed-off-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Alice Michael <alice.michael@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When VF is freshly created, but not brought up, ring->txq_teid
value is by default set to 0.
But 0 is a valid TEID. On some platforms the Root Node of
Tx scheduler has a TEID = 0. This can cause issues as shown below.
The proper way is to set ring->txq_teid to ICE_INVAL_TEID (0xFFFFFFFF).
Testing Hints:
echo 1 > /sys/class/net/ens785f0/device/sriov_numvfs
ip link set dev ens785f0v0 up
ip link set dev ens785f0v0 down
If we have freshly created VF and quickly turn it on and off, so there
would be no time to reach VIRTCHNL_OP_CONFIG_VSI_QUEUES stage, then
VIRTCHNL_OP_DISABLE_QUEUES stage will fail with error:
[ 639.531454] disable queue 89 failed 14
[ 639.532233] Failed to disable LAN Tx queues, error: ICE_ERR_AQ_ERROR
[ 639.533107] ice 0000:02:00.0: Failed to stop Tx ring 0 on VSI 5
The reason for the fail is that we are trying to send AQ command to
delete queue 89, which has never been created and receive an "invalid
argument" error from firmware.
As this queue has never been created, it's teid and ring->txq_teid
have default value 0.
ice_dis_vsi_txq has a check against non-existent queues:
node = ice_sched_find_node_by_teid(pi->root, q_teids[i]);
if (!node)
continue;
But on some platforms the Root Node of Tx scheduler has a teid = 0.
Hence, ice_sched_find_node_by_teid finds a node with teid = 0 (it is
pi->root), and we go further to submit an erroneous request to firmware.
Fixes: 37bb83901286 ("ice: Move common functions out of ice_main.c part 7/7")
Signed-off-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Alice Michael <alice.michael@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This node pointer is returned by of_find_compatible_node() with
refcount incremented. Calling of_node_put() to aovid the refcount leak.
Fixes: d346c9e86d86 ("dpaa2-ptp: reuse ptp_qoriq driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220404125336.13427-1-linmq006@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
nft_*.c files whose NFT_EXPR_STATEFUL flag is set on need to
use __GFP_ACCOUNT flag for objects that are dynamically
allocated from the packet path.
Such objects are allocated inside nft_expr_ops->init() callbacks
executed in task context while processing netlink messages.
In addition, this patch adds accounting to nft_set_elem_expr_clone()
used for the same purposes.
Signed-off-by: Vasily Averin <vvs@openvz.org>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Use dma_resv_get_singleton() here to eventually get more than one write
fence as single fence.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Lyude Paul <lyude@redhat.com>
Cc: nouveau@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220321135856.1331-14-christian.koenig@amd.com
|
|
There were a few patches left in drm-misc-next-fixes, let's bring them
into drm-misc-fixes.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
Let's start the 5.18 fixes cycle.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
Let's start the 5.19 development cycle.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
Since not all compilers have a function attribute to disable KCOV
instrumentation, objtool can rewrite KCOV instrumentation in noinstr
functions as per commit:
f56dae88a81f ("objtool: Handle __sanitize_cov*() tail calls")
However, this has subtle interaction with the SLS validation from
commit:
1cc1e4c8aab4 ("objtool: Add straight-line-speculation validation")
In that when a tail-call instrucion is replaced with a RET an
additional INT3 instruction is also written, but is not represented in
the decoded instruction stream.
This then leads to false positive missing INT3 objtool warnings in
noinstr code.
Instead of adding additional struct instruction objects, mark the RET
instruction with retpoline_safe to suppress the warning (since we know
there really is an INT3).
Fixes: 1cc1e4c8aab4 ("objtool: Add straight-line-speculation validation")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220323230712.GA8939@worktop.programming.kicks-ass.net
|
|
Objtool reports:
arch/x86/crypto/poly1305-x86_64.o: warning: objtool: poly1305_blocks_avx() falls through to next function poly1305_blocks_x86_64()
arch/x86/crypto/poly1305-x86_64.o: warning: objtool: poly1305_emit_avx() falls through to next function poly1305_emit_x86_64()
arch/x86/crypto/poly1305-x86_64.o: warning: objtool: poly1305_blocks_avx2() falls through to next function poly1305_blocks_x86_64()
Which reads like:
0000000000000040 <poly1305_blocks_x86_64>:
40: f3 0f 1e fa endbr64
...
0000000000000400 <poly1305_blocks_avx>:
400: f3 0f 1e fa endbr64
404: 44 8b 47 14 mov 0x14(%rdi),%r8d
408: 48 81 fa 80 00 00 00 cmp $0x80,%rdx
40f: 73 09 jae 41a <poly1305_blocks_avx+0x1a>
411: 45 85 c0 test %r8d,%r8d
414: 0f 84 2a fc ff ff je 44 <poly1305_blocks_x86_64+0x4>
...
These are simple conditional tail-calls and *should* be recognised as
such by objtool, however due to a mistake in commit 08f87a93c8ec
("objtool: Validate IBT assumptions") this is failing.
Specifically, the jump_dest is +4, this means the instruction pointed
at will not be ENDBR and as such it will fail the second clause of
is_first_func_insn() that was supposed to capture this exact case.
Instead, have is_first_func_insn() look at the previous instruction.
Fixes: 08f87a93c8ec ("objtool: Validate IBT assumptions")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220322115125.811582125@infradead.org
|
|
The macro __WARN_FLAGS() uses a local variable named "f". This being a
common name, there is a risk of shadowing other variables.
For example, GCC would yield:
| In file included from ./include/linux/bug.h:5,
| from ./include/linux/cpumask.h:14,
| from ./arch/x86/include/asm/cpumask.h:5,
| from ./arch/x86/include/asm/msr.h:11,
| from ./arch/x86/include/asm/processor.h:22,
| from ./arch/x86/include/asm/timex.h:5,
| from ./include/linux/timex.h:65,
| from ./include/linux/time32.h:13,
| from ./include/linux/time.h:60,
| from ./include/linux/stat.h:19,
| from ./include/linux/module.h:13,
| from virt/lib/irqbypass.mod.c:1:
| ./include/linux/rcupdate.h: In function 'rcu_head_after_call_rcu':
| ./arch/x86/include/asm/bug.h:80:21: warning: declaration of 'f' shadows a parameter [-Wshadow]
| 80 | __auto_type f = BUGFLAG_WARNING|(flags); \
| | ^
| ./include/asm-generic/bug.h:106:17: note: in expansion of macro '__WARN_FLAGS'
| 106 | __WARN_FLAGS(BUGFLAG_ONCE | \
| | ^~~~~~~~~~~~
| ./include/linux/rcupdate.h:1007:9: note: in expansion of macro 'WARN_ON_ONCE'
| 1007 | WARN_ON_ONCE(func != (rcu_callback_t)~0L);
| | ^~~~~~~~~~~~
| In file included from ./include/linux/rbtree.h:24,
| from ./include/linux/mm_types.h:11,
| from ./include/linux/buildid.h:5,
| from ./include/linux/module.h:14,
| from virt/lib/irqbypass.mod.c:1:
| ./include/linux/rcupdate.h:1001:62: note: shadowed declaration is here
| 1001 | rcu_head_after_call_rcu(struct rcu_head *rhp, rcu_callback_t f)
| | ~~~~~~~~~~~~~~~^
For reference, sparse also warns about it, c.f. [1].
This patch renames the variable from f to __flags (with two underscore
prefixes as suggested in the Linux kernel coding style [2]) in order
to prevent collisions.
[1] https://lore.kernel.org/all/CAFGhKbyifH1a+nAMCvWM88TK6fpNPdzFtUXPmRGnnQeePV+1sw@mail.gmail.com/
[2] Linux kernel coding style, section 12) Macros, Enums and RTL,
paragraph 5) namespace collisions when defining local variables in
macros resembling functions
https://www.kernel.org/doc/html/latest/process/coding-style.html#macros-enums-and-rtl
Fixes: bfb1a7c91fb7 ("x86/bug: Merge annotate_reachable() into_BUG_FLAGS() asm")
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20220324023742.106546-1-mailhol.vincent@wanadoo.fr
|
|
Our YCbCr output is always supposed to be limited range BT.709.
That's what we send with native HDMI. The conn_state->colorspace
stuff is entirely independent of that and is not supposed to alter
the generated output in any way. If we want a way to do that then
we need a new proprty for it.
Make it so that the RGB->YCbCr conversion when performed by the
DPF will match the BT.709 we would transmit with native HDMI.
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220322120015.28074-12-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
|
|
With native HDMI we allow the user to override the mode with
something that may not respect the downstream (sink,dual-mode adapter)
TMDS clock limits. Let's reuse the same logic for DP HDMI DFPs
so that behaviour is more or less uniform.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220322120015.28074-11-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
|
|
Currently we only support "4:2:0 also" modes on native HDMI.
Extend that support for DP as well.
With all the HDMI DFP TMDS clock handling sorted out this
is now going to work for both native DP and DP->HDMI
converters. As with native HDMI we first check if RGB
output is possible, and if not we try YCbCr 4:2:0 instead.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220322120015.28074-10-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
|
|
Rework the HDMI DFP TMDS clock checks to also check at 8bpc.
Previously we only checked the deep color cases. But I suppose
a sink could potentially declare "4:2:0 also" modes that only
actually fit within its own limits when using 4:2:0. Even if
that is too nuts to be real there is no real harm in running
through the full checks for everything.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220322120015.28074-9-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
|
|
Hoist the drm_mode_is_420_only() from intel_dp_output_format()
into the caller. This will allow intel_dp_output_format() to be
reused for "4:2:0 also" modes.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220322120015.28074-8-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
|
|
Prefer to use intel_connector over drm_connector. Also clean
up the related variable names a bit.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220322120015.28074-7-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
|
|
Consolidate the double pfit call, and reorder things so that
intel_dp_output_format() and intel_dp_compute_link_config() are
back-to-back. They are intimately related, and will need to be
called twice to properly handle the "4:2:0 also" modes.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220322120015.28074-6-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
|
|
intel_dp_hdmi_ycbcr420() does account for native DP 4:2:0
output as well, so lets rename it a bit.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220322120015.28074-5-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
|
|
Declutter intel_dp_compute_config() a bit by moving the
has_audio computation into a helper. HDMI already does the same thing.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220322120015.28074-4-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
|
|
Currently we only look at the DFPs max TMDS clock limit when
considering whether the mode is valid, or whether we can do
deep color. The sink's max TMDS clock limit may be lower than
the DFPs, so we need to account for it as well.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4095
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2844
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220322120015.28074-3-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
|
|
We're currently duplicating the DFP min/max TMDS clock checks
in .mode_valid() and .compute_config(). Extract a helper suitable
for both use cases.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220322120015.28074-2-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
|
|
When enable a cgroup event, cpuctx->cgrp setting is conditional
on the current task cgrp matching the event's cgroup, so have to
do it for every new event. It brings complexity but no advantage.
To keep it simple, this patch would always set cpuctx->cgrp
when enable the first cgroup event, and reset to NULL when disable
the last cgroup event.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220329154523.86438-5-zhouchengming@bytedance.com
|
|
There is a race problem that can trigger WARN_ON_ONCE(cpuctx->cgrp)
in perf_cgroup_switch().
CPU1 CPU2
perf_cgroup_sched_out(prev, next)
cgrp1 = perf_cgroup_from_task(prev)
cgrp2 = perf_cgroup_from_task(next)
if (cgrp1 != cgrp2)
perf_cgroup_switch(prev, PERF_CGROUP_SWOUT)
cgroup_migrate_execute()
task->cgroups = ?
perf_cgroup_attach()
task_function_call(task, __perf_cgroup_move)
perf_cgroup_sched_in(prev, next)
cgrp1 = perf_cgroup_from_task(prev)
cgrp2 = perf_cgroup_from_task(next)
if (cgrp1 != cgrp2)
perf_cgroup_switch(next, PERF_CGROUP_SWIN)
__perf_cgroup_move()
perf_cgroup_switch(task, PERF_CGROUP_SWOUT | PERF_CGROUP_SWIN)
The commit a8d757ef076f ("perf events: Fix slow and broken cgroup
context switch code") want to skip perf_cgroup_switch() when the
perf_cgroup of "prev" and "next" are the same.
But task->cgroups can change in concurrent with context_switch()
in cgroup_migrate_execute(). If cgrp1 == cgrp2 in sched_out(),
cpuctx won't do sched_out. Then task->cgroups changed cause
cgrp1 != cgrp2 in sched_in(), cpuctx will do sched_in. So trigger
WARN_ON_ONCE(cpuctx->cgrp).
Even though __perf_cgroup_move() will be synchronized as the context
switch disables the interrupt, context_switch() still can see the
task->cgroups is changing in the middle, since task->cgroups changed
before sending IPI.
So we have to combine perf_cgroup_sched_in() into perf_cgroup_sched_out(),
unified into perf_cgroup_switch(), to fix the incosistency between
perf_cgroup_sched_out() and perf_cgroup_sched_in().
But we can't just compare prev->cgroups with next->cgroups to decide
whether to skip cpuctx sched_out/in since the prev->cgroups is changing
too. For example:
CPU1 CPU2
cgroup_migrate_execute()
prev->cgroups = ?
perf_cgroup_attach()
task_function_call(task, __perf_cgroup_move)
perf_cgroup_switch(task)
cgrp1 = perf_cgroup_from_task(prev)
cgrp2 = perf_cgroup_from_task(next)
if (cgrp1 != cgrp2)
cpuctx sched_out/in ...
task_function_call() will return -ESRCH
In the above example, prev->cgroups changing cause (cgrp1 == cgrp2)
to be true, so skip cpuctx sched_out/in. And later task_function_call()
would return -ESRCH since the prev task isn't running on cpu anymore.
So we would leave perf_events of the old prev->cgroups still sched on
the CPU, which is wrong.
The solution is that we should use cpuctx->cgrp to compare with
the next task's perf_cgroup. Since cpuctx->cgrp can only be changed
on local CPU, and we have irq disabled, we can read cpuctx->cgrp to
compare without holding ctx lock.
Fixes: a8d757ef076f ("perf events: Fix slow and broken cgroup context switch code")
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220329154523.86438-4-zhouchengming@bytedance.com
|
|
Since we use perf_cgroup_set_timestamp() to start cgroup time and
set active to 1, then use update_cgrp_time_from_cpuctx() to stop
cgroup time and set active to 0.
We can use info->active directly to check if cgroup is active.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220329154523.86438-3-zhouchengming@bytedance.com
|
|
The current code pass task around for ctx_sched_in(), only
to get perf_cgroup of the task, then update the timestamp
of it and its ancestors and set them to active.
But we can use cpuctx->cgrp to get active perf_cgroup and
its ancestors since cpuctx->cgrp has been set before
ctx_sched_in().
This patch remove the task argument in ctx_sched_in()
and cleanup related code.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220329154523.86438-2-zhouchengming@bytedance.com
|
|
On Sapphire Rapids, the FRONTEND_RETIRED.MS_FLOWS event requires the
FRONTEND MSR value 0x8. However, the current FRONTEND MSR mask doesn't
support it.
Update intel_spr_extra_regs[] to support it.
Fixes: 61b985e3e775 ("perf/x86/intel: Add perf core PMU support for Sapphire Rapids")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1648482543-14923-2-git-send-email-kan.liang@linux.intel.com
|
|
The INST_RETIRED.PREC_DIST event (0x0100) doesn't count on SPR.
perf stat -e cpu/event=0xc0,umask=0x0/,cpu/event=0x0,umask=0x1/ -C0
Performance counter stats for 'CPU(s) 0':
607,246 cpu/event=0xc0,umask=0x0/
0 cpu/event=0x0,umask=0x1/
The encoding for INST_RETIRED.PREC_DIST is pseudo-encoding, which
doesn't work on the generic counters. However, current perf extends its
mask to the generic counters.
The pseudo event-code for a fixed counter must be 0x00. Check and avoid
extending the mask for the fixed counter event which using the
pseudo-encoding, e.g., ref-cycles and PREC_DIST event.
With the patch,
perf stat -e cpu/event=0xc0,umask=0x0/,cpu/event=0x0,umask=0x1/ -C0
Performance counter stats for 'CPU(s) 0':
583,184 cpu/event=0xc0,umask=0x0/
583,048 cpu/event=0x0,umask=0x1/
Fixes: 2de71ee153ef ("perf/x86/intel: Fix ICL/SPR INST_RETIRED.PREC_DIST encodings")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1648482543-14923-1-git-send-email-kan.liang@linux.intel.com
|
|
It was reported that some perf event setup can make fork failed on
ARM64. It was the case of a group of mixed hw and sw events and it
failed in perf_event_init_task() due to armpmu_event_init().
The ARM PMU code checks if all the events in a group belong to the
same PMU except for software events. But it didn't set the event_caps
of inherited events and no longer identify them as software events.
Therefore the test failed in a child process.
A simple reproducer is:
$ perf stat -e '{cycles,cs,instructions}' perf bench sched messaging
# Running 'sched/messaging' benchmark:
perf: fork(): Invalid argument
The perf stat was fine but the perf bench failed in fork(). Let's
inherit the event caps from the parent.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20220328200112.457740-1-namhyung@kernel.org
|
|
The uncore PMU of the Raptor Lake is the same as Alder Lake.
Add new PCIIDs of IMC for Raptor Lake.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/1647366360-82824-4-git-send-email-kan.liang@linux.intel.com
|
|
Raptor Lake is Intel's successor to Alder lake. PPERF and SMI_COUNT MSRs
are also supported.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/1647366360-82824-3-git-send-email-kan.liang@linux.intel.com
|
|
Raptor Lake is Intel's successor to Alder lake. From the perspective of
Intel cstate residency counters, there is nothing changed compared with
Alder lake.
Share adl_cstates with Alder lake.
Update the comments for Raptor Lake.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/1647366360-82824-2-git-send-email-kan.liang@linux.intel.com
|
|
From PMU's perspective, Raptor Lake is the same as the Alder Lake. The
only difference is the event list, which will be supported in the perf
tool later.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/1647366360-82824-1-git-send-email-kan.liang@linux.intel.com
|
|
The local_lock() is now using a proper static inline function which is
enough for llvm to accept that the variable is used.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220328145810.86783-4-bigeasy@linutronix.de
|
