summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-12-16use __netdev_notify_peers in ibmvnicLijun Pan
Start to use the lockless version of netdev_notify_peers. Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-16net: core: introduce __netdev_notify_peersLijun Pan
There are some use cases for netdev_notify_peers in the context when rtnl lock is already held. Introduce lockless version of netdev_notify_peers call to save the extra code to call call_netdevice_notifiers(NETDEV_NOTIFY_PEERS, dev); call_netdevice_notifiers(NETDEV_RESEND_IGMP, dev); After that, convert netdev_notify_peers to call the new helper. Suggested-by: Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-16net: allwinner: Fix some resources leak in the error handling path of the ↵Christophe JAILLET
probe and in the remove function 'irq_of_parse_and_map()' should be balanced by a corresponding 'irq_dispose_mapping()' call. Otherwise, there is some resources leaks. Add such a call in the error handling path of the probe function and in the remove function. Fixes: 492205050d77 ("net: Add EMAC ethernet driver found on Allwinner A10 SoC's") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20201214202117.146293-1-christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-16Merge tag 'seccomp-v5.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull seccomp updates from Kees Cook: "The major change here is finally gaining seccomp constant-action bitmaps, which internally reduces the seccomp overhead for many real-world syscall filters to O(1), as discussed at Plumbers this year. - Improve seccomp performance via constant-action bitmaps (YiFei Zhu & Kees Cook) - Fix bogus __user annotations (Jann Horn) - Add missed CONFIG for improved selftest coverage (Mickaël Salaün)" * tag 'seccomp-v5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: selftests/seccomp: Update kernel config seccomp: Remove bogus __user annotations seccomp/cache: Report cache data through /proc/pid/seccomp_cache xtensa: Enable seccomp architecture tracking sh: Enable seccomp architecture tracking s390: Enable seccomp architecture tracking riscv: Enable seccomp architecture tracking powerpc: Enable seccomp architecture tracking parisc: Enable seccomp architecture tracking csky: Enable seccomp architecture tracking arm: Enable seccomp architecture tracking arm64: Enable seccomp architecture tracking selftests/seccomp: Compare bitmap vs filter overhead x86: Enable seccomp architecture tracking seccomp/cache: Add "emulator" to check if filter is constant allow seccomp/cache: Lookup syscall allowlist bitmap for fast path
2020-12-16Merge tag 'pstore-v5.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull pstore updates from Kees Cook: - Clean up unused but exposed API (Christoph Hellwig) - Provide KCONFIG for default size of kmsg buffer (Vasile-Laurentiu Stanimir) * tag 'pstore-v5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: pstore: Move kmsg_bytes default into Kconfig pstore/blk: remove {un,}register_pstore_blk pstore/blk: update the command line example pstore/zone: cap the maximum device size
2020-12-16Merge tag 'gcc-plugins-v5.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull gcc-plugins updates from Kees Cook: - Clean up gcc plugin builds now that GCC must be 4.9+ (Masahiro Yamada) - Update MAINTAINERS (Kees Cook) * tag 'gcc-plugins-v5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: MAINTAINERS: Drop inactive gcc-plugins maintainer gcc-plugins: simplify GCC plugin-dev capability test gcc-plugins: remove code for GCC versions older than 4.9
2020-12-16ethtool: fix string set id checkMichal Kubecek
Syzbot reported a shift of a u32 by more than 31 in strset_parse_request() which is undefined behavior. This is caused by range check of string set id using variable ret (which is always 0 at this point) instead of id (string set id from request). Fixes: 71921690f974 ("ethtool: provide string sets with STRSET_GET request") Reported-by: syzbot+96523fb438937cd01220@syzkaller.appspotmail.com Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Link: https://lore.kernel.org/r/b54ed5c5fd972a59afea3e1badfb36d86df68799.1607952208.git.mkubecek@suse.cz Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-16Merge tag 'Smack-for-5.11' of git://github.com/cschaufler/smack-nextLinus Torvalds
Pull smack updates from Casey Schaufler: "There are no functional changes. Just one minor code clean-up and a set of corrections in function header comments" * tag 'Smack-for-5.11' of git://github.com/cschaufler/smack-next: security/smack: remove unused varible 'rc' Smack: fix kernel-doc interface on functions
2020-12-16net: mscc: ocelot: Fix a resource leak in the error handling path of the ↵Christophe JAILLET
probe function In case of error after calling 'ocelot_init()', it must be undone by a corresponding 'ocelot_deinit()' call, as already done in the remove function. Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201213114838.126922-1-christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-16net/connector: Add const qualifier to cb_idGeoff Levand
The connector driver never modifies any cb_id passed to it, so add a const qualifier to those arguments so callers can declare their struct cb_id as a constant object. Fixes build warnings like these when passing a constant struct cb_id: warning: passing argument 1 of ‘cn_add_callback’ discards ‘const’ qualifier from pointer target Signed-off-by: Geoff Levand <geoff@infradead.org> Link: https://lore.kernel.org/r/a9e49c9e-67fa-16e7-0a6b-72f6bd30c58a@infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-16Merge tag 'integrity-v5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity Pull integrity subsystem updates from Mimi Zohar: "Just three patches here. Other integrity changes are being upstreamed via EFI (defines a common EFI secure and trusted boot IMA policy) and BPF LSM (exporting the IMA file cache hash info based on inode). The three patches included here: - bug fix: fail calculating the file hash, when a file not opened for read and the attempt to re-open it for read fails. - defer processing the "ima_appraise" boot command line option to avoid enabling different modes (e.g. fix, log) to when the secure boot flag is available on arm. - defines "ima-buf" as the default IMA buffer measurement template in preparation for the builtin integrity "critical data" policy" * tag 'integrity-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: ima: Don't modify file descriptor mode on the fly ima: select ima-buf template for buffer measurement ima: defer arch_ima_get_secureboot() call to IMA init time
2020-12-16net: bcmgenet: Fix a resource leak in an error handling path in the probe ↵Christophe JAILLET
functin If the 'register_netdev()' call fails, we must undo a previous 'bcmgenet_mii_init()' call. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20201212182005.120437-1-christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-16dpaa2-eth: fix the size of the mapped SGT bufferIoana Ciornei
This patch fixes an error condition triggered when the code path which transmits a S/G frame descriptor when the skb's headroom is not enough for DPAA2's needs. We are greated with a splat like the one below when a SGT structure is recycled and that is because even though a dma_unmap is performed on the Tx confirmation path, the unmap is not done with the proper size. [ 714.464927] WARNING: CPU: 13 PID: 0 at drivers/iommu/io-pgtable-arm.c:281 __arm_lpae_map+0x2d4/0x30c (...) [ 714.465343] Call trace: [ 714.465348] __arm_lpae_map+0x2d4/0x30c [ 714.465353] __arm_lpae_map+0x114/0x30c [ 714.465357] __arm_lpae_map+0x114/0x30c [ 714.465362] __arm_lpae_map+0x114/0x30c [ 714.465366] arm_lpae_map+0xf4/0x180 [ 714.465373] arm_smmu_map+0x4c/0xc0 [ 714.465379] __iommu_map+0x100/0x2bc [ 714.465385] iommu_map_atomic+0x20/0x30 [ 714.465391] __iommu_dma_map+0xb0/0x110 [ 714.465397] iommu_dma_map_page+0xb8/0x120 [ 714.465404] dma_map_page_attrs+0x1a8/0x210 [ 714.465413] __dpaa2_eth_tx+0x384/0xbd0 [fsl_dpaa2_eth] [ 714.465421] dpaa2_eth_tx+0x84/0x134 [fsl_dpaa2_eth] [ 714.465427] dev_hard_start_xmit+0x10c/0x2b0 [ 714.465433] sch_direct_xmit+0x1a0/0x550 (...) The dpaa2-eth driver uses an area of software annotations to transmit necessary information from the Tx path to the Tx confirmation one. This SWA structure has a different layout for each kind of frame that we are dealing with: linear, S/G or XDP. The commit referenced was incorrectly setting up the 'sgt_size' field for the S/G type of SWA even though we are dealing with a linear skb here. Fixes: d70446ee1f40 ("dpaa2-eth: send a scatter-gather FD instead of realloc-ing") Reported-by: Daniel Thompson <daniel.thompson@linaro.org> Tested-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Link: https://lore.kernel.org/r/20201211171607.108034-1-ciorneiioana@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-16Merge tag 'selinux-pr-20201214' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull selinux updates from Paul Moore: "While we have a small number of SELinux patches for v5.11, there are a few changes worth highlighting: - Change the LSM network hooks to pass flowi_common structs instead of the parent flowi struct as the LSMs do not currently need the full flowi struct and they do not have enough information to use it safely (missing information on the address family). This patch was discussed both with Herbert Xu (representing team netdev) and James Morris (representing team LSMs-other-than-SELinux). - Fix how we handle errors in inode_doinit_with_dentry() so that we attempt to properly label the inode on following lookups instead of continuing to treat it as unlabeled. - Tweak the kernel logic around allowx, auditallowx, and dontauditx SELinux policy statements such that the auditx/dontauditx are effective even without the allowx statement. Everything passes our test suite" * tag 'selinux-pr-20201214' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: lsm,selinux: pass flowi_common instead of flowi to the LSM hooks selinux: Fix fall-through warnings for Clang selinux: drop super_block backpointer from superblock_security_struct selinux: fix inode_doinit_with_dentry() LABEL_INVALID error handling selinux: allow dontauditx and auditallowx rules to take effect without allowx selinux: fix error initialization in inode_doinit_with_dentry()
2020-12-16net: dsa: qca: ar9331: fix sleeping function called from invalid context bugOleksij Rempel
With lockdep enabled, we will get following warning: ar9331_switch ethernet.1:10 lan0 (uninitialized): PHY [!ahb!ethernet@1a000000!mdio!switch@10:00] driver [Qualcomm Atheros AR9331 built-in PHY] (irq=13) BUG: sleeping function called from invalid context at kernel/locking/mutex.c:935 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 18, name: kworker/0:1 INFO: lockdep is turned off. irq event stamp: 602 hardirqs last enabled at (601): [<8073fde0>] _raw_spin_unlock_irq+0x3c/0x80 hardirqs last disabled at (602): [<8073a4f4>] __schedule+0x184/0x800 softirqs last enabled at (0): [<80080f60>] copy_process+0x578/0x14c8 softirqs last disabled at (0): [<00000000>] 0x0 CPU: 0 PID: 18 Comm: kworker/0:1 Not tainted 5.10.0-rc3-ar9331-00734-g7d644991df0c #31 Workqueue: events deferred_probe_work_func Stack : 80980000 80980000 8089ef70 80890000 804b5414 80980000 00000002 80b53728 00000000 800d1268 804b5414 ffffffde 00000017 800afe08 81943860 0f5bfc32 00000000 00000000 8089ef70 819436c0 ffffffea 00000000 00000000 00000000 8194390c 808e353c 0000000f 66657272 80980000 00000000 00000000 80890000 804b5414 80980000 00000002 80b53728 00000000 00000000 00000000 80d40000 ... Call Trace: [<80069ce0>] show_stack+0x9c/0x140 [<800afe08>] ___might_sleep+0x220/0x244 [<8073bfb0>] __mutex_lock+0x70/0x374 [<8073c2e0>] mutex_lock_nested+0x2c/0x38 [<804b5414>] regmap_update_bits_base+0x38/0x8c [<804ee584>] regmap_update_bits+0x1c/0x28 [<804ee714>] ar9331_sw_unmask_irq+0x34/0x60 [<800d91f0>] unmask_irq+0x48/0x70 [<800d93d4>] irq_startup+0x114/0x11c [<800d65b4>] __setup_irq+0x4f4/0x6d0 [<800d68a0>] request_threaded_irq+0x110/0x190 [<804e3ef0>] phy_request_interrupt+0x4c/0xe4 [<804df508>] phylink_bringup_phy+0x2c0/0x37c [<804df7bc>] phylink_of_phy_connect+0x118/0x130 [<806c1a64>] dsa_slave_create+0x3d0/0x578 [<806bc4ec>] dsa_register_switch+0x934/0xa20 [<804eef98>] ar9331_sw_probe+0x34c/0x364 [<804eb48c>] mdio_probe+0x44/0x70 [<8049e3b4>] really_probe+0x30c/0x4f4 [<8049ea10>] driver_probe_device+0x264/0x26c [<8049bc10>] bus_for_each_drv+0xb4/0xd8 [<8049e684>] __device_attach+0xe8/0x18c [<8049ce58>] bus_probe_device+0x48/0xc4 [<8049db70>] deferred_probe_work_func+0xdc/0xf8 [<8009ff64>] process_one_work+0x2e4/0x4a0 [<800a0770>] worker_thread+0x2a8/0x354 [<800a774c>] kthread+0x16c/0x174 [<8006306c>] ret_from_kernel_thread+0x14/0x1c ar9331_switch ethernet.1:10 lan1 (uninitialized): PHY [!ahb!ethernet@1a000000!mdio!switch@10:02] driver [Qualcomm Atheros AR9331 built-in PHY] (irq=13) DSA: tree 0 setup To fix it, it is better to move access to MDIO register to the .irq_bus_sync_unlock call back. Fixes: ec6698c272de ("net: dsa: add support for Atheros AR9331 built-in switch") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20201211110317.17061-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-16Merge tag 'audit-pr-20201214' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit Pull audit updates from Paul Moore: "A small set of audit patches for v5.11 with four patches in total and only one of any real significance. Richard's patch to trigger accompanying records causes the kernel to emit additional related records when an audit event occurs; helping provide some much needed context to events in the audit log. It is also worth mentioning that this is a revised patch based on an earlier attempt that had to be reverted in the v5.8 time frame. Everything passes our test suite, and with no problems reported please merge this for v5.11" * tag 'audit-pr-20201214' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: audit: replace atomic_add_return() audit: fix macros warnings audit: trigger accompanying records when no rules present audit: fix a kernel-doc markup
2020-12-16Merge branch 'i40e-ice-af_xdp-zc-fixes'Jakub Kicinski
Björn Töpel says: ==================== i40e/ice AF_XDP ZC fixes This series address two crashes in the AF_XDP zero-copy mode for ice and i40e. More details in each individual the commit message. ==================== Link: https://lore.kernel.org/r/20201211145712.72957-1-bjorn.topel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-16i40e, xsk: clear the status bits for the next_to_use descriptorBjörn Töpel
On the Rx side, the next_to_use index points to the next item in the HW ring to be refilled/allocated, and next_to_clean points to the next item to potentially be processed. When the HW Rx ring is fully refilled, i.e. no packets has been processed, the next_to_use will be next_to_clean - 1. When the ring is fully processed next_to_clean will be equal to next_to_use. The latter case is where a bug is triggered. If the next_to_use bits are not cleared, and the "fully processed" state is entered, a stale descriptor can be processed. The skb-path correctly clear the status bit for the next_to_use descriptor, but the AF_XDP zero-copy path did not do that. This change adds the status bits clearing of the next_to_use descriptor. Fixes: 3b4f0b66c2b3 ("i40e, xsk: Migrate to new MEM_TYPE_XSK_BUFF_POOL") Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-16ice, xsk: clear the status bits for the next_to_use descriptorBjörn Töpel
On the Rx side, the next_to_use index points to the next item in the HW ring to be refilled/allocated, and next_to_clean points to the next item to potentially be processed. When the HW Rx ring is fully refilled, i.e. no packets has been processed, the next_to_use will be next_to_clean - 1. When the ring is fully processed next_to_clean will be equal to next_to_use. The latter case is where a bug is triggered. If the next_to_use bits are not cleared, and the "fully processed" state is entered, a stale descriptor can be processed. The skb-path correctly clear the status bit for the next_to_use descriptor, but the AF_XDP zero-copy path did not do that. This change adds the status bits clearing of the next_to_use descriptor. Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-16Merge tag 'printk-for-5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk updates from Petr Mladek: - Finally allow parallel writes and reads into/from the lockless ringbuffer. But it is not a complete solution. Readers are still serialized against each other. And nested writes are still prevented by printk_safe per-CPU buffers. - Use ttynull as the ultimate fallback for /dev/console. - Officially allow disabling console output by using console="" or console=null - A few code cleanups * tag 'printk-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: printk: remove logbuf_lock writer-protection of ringbuffer printk: inline log_output(),log_store() in vprintk_store() printk: remove obsolete dead assignment printk/console: Allow to disable console output by using console="" or console=null init/console: Use ttynull as a fallback when there is no console printk: ringbuffer: Reference text_data_ring directly in callees.
2020-12-16Merge tags 'spi-nor/for-5.11' and 'nand/for-5.11' into mtd/nextMiquel Raynal
SPI NOR core changes: - Initial support for stateful Octal DTR mode using volatile settings - Preliminary support for JEDEC 251 (xSPI) and JEDEC 216D standards - Support for Cypress Semper flash - Support to specify ECC block size of SPI NOR flashes - Fixes to avoid clearing of non-volatile Block Protection bits at probe Generic NAND core: * ECC management: - Add an I/O request tweaking mechanism - Entire rework of the software BCH ECC driver, creation of a real ECC engine, getting rid of raw NAND structures, migration to more generic prototypes, misc fixes and style cleanup. Moved now to the Generic NAND layer. - Entire rework of the software Hamming ECC driver, creation of a real ECC engine, getting rid of raw NAND structures, misc renames, comment updates, cleanup, and style fixes. Moved now to the generic NAND layer. - Necessary plumbing at the NAND level to retrieve generic NAND ECC engines (softwares and on-die). - Update of the bindings. Raw NAND core: * Geting rid of the chip->ecc.priv entry. * Fix miscellaneous typos in kernel-doc Raw NAND controller drivers: * AU1550: Ensure the presence of the right includes * Davinci: Do not use extra dereferencing * GPMI: - Fix the driver only sense CS0 R/B issue - Fix the random DMA timeout issue - Use a single line for of_device_id - Use of_device_get_match_data() - Fix reference count leak in gpmi ops - Cleanup makefile - Fix binding matching of clocks on different SoCs * Ingenic: remove redundant get_device() in ingenic_ecc_get() * Intel LGM: New NAND controller driver * Marvell: Drop useless line * Meson: - Fix a resource leak in init - Fix meson_nfc_dma_buffer_release() arguments * mxc: - Use device_get_match_data() - Use a single line for of_device_id - Remove platform data support * Qcom: - Add support for SDX55 - Support for IPQ6018 QPIC NAND controller - Fix DMA sync on FLASH_STATUS register read * Rockchip: New NAND controller driver for RK3308, RK2928 and others * Sunxi: Add MDMA support SPI-NAND core: * Creation of a SPI-NAND on-die ECC engine * Move ECC related definitions earlier in the driver * Fix typo in comment * Fill a default ECC provider/algorithm * Remove outdated comment * Fix OOB read * Allow the case where there is no ECC engine * Use the external ECC engine logic SPI-NAND chip drivers: * Micron: - Add support for MT29F2G01AAAED - Use more specific names * Macronix: - Add support for MX35LFxG24AD - Add support for MX35LFxGE4AD Others: * onenand: Use mtd->oops_panic_write as condition * plat-ram: correctly free memory on error path in platram_probe()
2020-12-16lan743x: fix rx_napi_poll/interrupt ping-pongSven Van Asbroeck
Even if there is more rx data waiting on the chip, the rx napi poll fn will never run more than once - it will always read a few buffers, then bail out and re-arm interrupts. Which results in ping-pong between napi and interrupt. This defeats the purpose of napi, and is bad for performance. Fix by making the rx napi poll behave identically to other ethernet drivers: 1. initialize rx napi polling with an arbitrary budget (64). 2. in the polling fn, return full weight if rx queue is not depleted, this tells the napi core to "keep polling". 3. update the rx tail ("ring the doorbell") once for every 8 processed rx ring buffers. Thanks to Jakub Kicinski, Eric Dumazet and Andrew Lunn for their expert opinions and suggestions. Tested with 20 seconds of full bandwidth receive (iperf3): rx irqs softirqs(NET_RX) ----------------------------- before 23827 33620 after 129 4081 Tested-by: Sven Van Asbroeck <thesven73@gmail.com> # lan7430 Fixes: 23f0703c125be ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com> Link: https://lore.kernel.org/r/20201215161954.5950-1-TheSven73@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-16char: ipmi: convert comma to semicolonZheng Yongjun
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Message-Id: <20201216132615.15529-1-zhengyongjun3@huawei.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2020-12-16fs/lockd: convert comma to semicolonZheng Yongjun
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-12-16NFSv4.2: fix error return on memory allocation failureColin Ian King
Currently when an alloc_page fails the error return is not set in variable err and a garbage initialized value is returned. Fix this by setting err to -ENOMEM before taking the error return path. Addresses-Coverity: ("Uninitialized scalar variable") Fixes: a1f26739ccdc ("NFSv4.2: improve page handling for GETXATTR") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-12-16writeback: don't warn on an unregistered BDI in __mark_inode_dirtyChristoph Hellwig
BDIs get unregistered during device removal, and this WARN can be trivially triggered by hot-removing a NVMe device while running fsx It is otherwise harmless as we still hold a BDI reference, and the writeback has been shut down already. Link: https://lore.kernel.org/r/20200928122613.434820-1-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2020-12-16Merge branch 'for-5.11/wacom' into for-linusJiri Kosina
2020-12-16Merge branch 'for-5.11/sony' into for-linusJiri Kosina
- DS4 power and firmware reporting fixes, from Roderick Colenbrander - support for ghlive PS3/WII u dongles, from Pascal Giard
2020-12-16Merge branch 'for-5.11/intel-ish' into for-linusJiri Kosina
2020-12-16Merge branch 'for-5.11/i2c-hid' into for-linusJiri Kosina
- error reporting fix from Coiby Xu
2020-12-16Merge branch 'for-5.11/elecom' into for-linusJiri Kosina
- support for EX-G M-XGL20DLBK device, from YOSHIOKA Takuma
2020-12-16Merge branch 'for-5.11/core' into for-linusJiri Kosina
- increase of maximum HID report size to 16KB in order to support some of the modern devices, from Dean Camera - control interface support for hidraw, from Dean Camera - stylus battery reporting improvement, from Dmitry Torokhov
2020-12-16Merge branch 'for-5.11/asus' into for-linusJiri Kosina
Support for ASUS N-Key keyboard, from Luke D Jones
2020-12-16Merge branch 'for-5.11/amd-sfh-hid' into for-linusJiri Kosina
From Sandeep Singh. AMD SFH (Sensor Fusion Hub) is HID based driver.SFH FW is part of MP2 processor (MP2 which is an ARM core connected to x86 for processing sensor data) and it runs on MP2 where in the driver resides on X86. The driver functionalities are divided into three parts: 1: amd-mp2-pcie:- This part of the module will communicate with MP2 firmware. MP2 which is exposed as a PCI device to the X86, uses mailboxes to talk to MP2 firmware to send/receive commands. 2: Client Layer:- This part of the driver will use DRAM data and convert the data into HID format based on HID reports. 3: Transport layer :- This part of the driver the will communicate with HID core.Communication between devices and HID core is mostly done via HID reports In terms of architecture, it resembles like ISH (Intel Integrated Sensor Hub). However the major difference is all the hid reports are generated as part of the kernel driver. AMD SFH is integrated as a part of SoC, starting from 17h family of processors. The solution is working well on several OEM products. AMD SFH uses HID over PCIe bus.
2020-12-16netfilter: nftables: fix incorrect increment of loop counterColin Ian King
The intention of the err_expr cleanup path is to iterate over the allocated expr_array objects and free them, starting from i - 1 and working down to the start of the array. Currently the loop counter is being incremented instead of decremented and also the index i is being used instead of k, repeatedly destroying the same expr_array element. Fix this by decrementing k and using k as the index into expr_array. Addresses-Coverity: ("Infinite loop") Fixes: 8cfd9b0f8515 ("netfilter: nftables: generalize set expressions support") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-12-16Merge tag 'fallthrough-fixes-clang-5.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull fallthrough fixes from Gustavo A. R. Silva: "Fix many fall-through warnings when building with Clang 12.0.0 using -Wimplicit-fallthrough. - powerpc: boot: include compiler_attributes.h (Nick Desaulniers) - Revert "lib: Revert use of fallthrough pseudo-keyword in lib/" (Nick Desaulniers) - powerpc: fix -Wimplicit-fallthrough (Nick Desaulniers) - lib: Fix fall-through warnings for Clang (Gustavo A. R. Silva)" * tag 'fallthrough-fixes-clang-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: lib: Fix fall-through warnings for Clang powerpc: fix -Wimplicit-fallthrough Revert "lib: Revert use of fallthrough pseudo-keyword in lib/" powerpc: boot: include compiler_attributes.h
2020-12-16Merge tag 'linux-kselftest-kunit-5.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kunit updates from Shuah Khan: - documentation update and fix to kunit_tool to parse diagnostic messages correctly from David Gow - Support for Parameterized Testing and fs/ext4 test updates to use KUnit parameterized testing feature from Arpitha Raghunandan - Helper to derive file names depending on --build_dir argument from Andy Shevchenko * tag 'linux-kselftest-kunit-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: fs: ext4: Modify inode-test.c to use KUnit parameterized testing feature kunit: Support for Parameterized Testing kunit: kunit_tool: Correctly parse diagnostic messages Documentation: kunit: provide guidance for testing many inputs kunit: Introduce get_file_path() helper
2020-12-16Merge tag 'linux-kselftest-next-5.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest updates from Shuah Khan: - Much needed gpio test Makefile cleanup to various problems with test dependencies and build errors from Michael Ellerman - Enabling vDSO test on non x86 platforms from Vincenzo Frascino - Fix intel_pstate to replace deprecated ftime() usages with clock_gettime() from Tommi Rantala - cgroup test build fix on older releases from Sachin Sant - A couple of spelling mistake fixes * tag 'linux-kselftest-next-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/cgroup: Fix build on older distros selftests/run_kselftest.sh: fix dry-run typo tool: selftests: fix spelling typo of 'writting' selftests/memfd: Fix implicit declaration warnings selftests: intel_pstate: ftime() is deprecated selftests/gpio: Add to CLEAN rule rather than overriding selftests/gpio: Fix build when source tree is read only selftests/gpio: Move include of lib.mk up selftests/gpio: Use TEST_GEN_PROGS_EXTENDED kselftest: Extend vdso correctness test to clock_gettime64 kselftest: Move test_vdso to the vDSO test suite kselftest: Extend vDSO selftest to clock_getres kselftest: Extend vDSO selftest kselftest: Enable vDSO test on non x86 platforms
2020-12-16Merge tag 'linux-kselftest-fixes-5.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fixes from Shuah Khan: "Build fixes for clone3 and rseq tests" * tag 'linux-kselftest-fixes-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/clone3: Fix build error rseq/selftests: Fix MEMBARRIER_CMD_PRIVATE_EXPEDITED_RSEQ build error under other arch.
2020-12-16Merge tag 'asm-generic-timers-5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic cross-architecture timer cleanup from Arnd Bergmann: "This cleans up two ancient timer features that were never completed in the past, CONFIG_GENERIC_CLOCKEVENTS and CONFIG_ARCH_USES_GETTIMEOFFSET. There was only one user left for the ARCH_USES_GETTIMEOFFSET variant of clocksource implementations, the ARM EBSA110 platform. Rather than changing to use modern timekeeping, we remove the platform entirely as Russell no longer uses his machine and nobody else seems to have one any more. The conditional code for using arch_gettimeoffset() is removed as a result. For CONFIG_GENERIC_CLOCKEVENTS, there are still a couple of platforms not using clockevent drivers: parisc, ia64, most of m68k, and one Arm platform. These all do timer ticks slighly differently, and this gets cleaned up to the point they at least all call the same helper function. Instead of most platforms using 'select GENERIC_CLOCKEVENTS' in Kconfig, the polarity is now reversed, with the few remaining ones selecting LEGACY_TIMER_TICK instead" * tag 'asm-generic-timers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: timekeeping: default GENERIC_CLOCKEVENTS to enabled timekeeping: remove xtime_update m68k: remove timer_interrupt() function m68k: change remaining timers to legacy_timer_tick m68k: m68328: use legacy_timer_tick() m68k: sun3/sun3c: use legacy_timer_tick m68k: split heartbeat out of timer function m68k: coldfire: use legacy_timer_tick() parisc: use legacy_timer_tick ARM: rpc: use legacy_timer_tick ia64: convert to legacy_timer_tick timekeeping: add CONFIG_LEGACY_TIMER_TICK timekeeping: remove arch_gettimeoffset net: remove am79c961a driver ARM: remove ebsa110 platform
2020-12-15Merge tag 'asm-generic-mmu-context-5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic mmu-context cleanup from Arnd Bergmann: "This is a cleanup series from Nicholas Piggin, preparing for later changes. The asm/mmu_context.h header are generalized and common code moved to asm-gneneric/mmu_context.h. This saves a bit of code and makes it easier to change in the future" * tag 'asm-generic-mmu-context-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (25 commits) h8300: Fix generic mmu_context build m68k: mmu_context: Fix Sun-3 build xtensa: use asm-generic/mmu_context.h for no-op implementations x86: use asm-generic/mmu_context.h for no-op implementations um: use asm-generic/mmu_context.h for no-op implementations sparc: use asm-generic/mmu_context.h for no-op implementations sh: use asm-generic/mmu_context.h for no-op implementations s390: use asm-generic/mmu_context.h for no-op implementations riscv: use asm-generic/mmu_context.h for no-op implementations powerpc: use asm-generic/mmu_context.h for no-op implementations parisc: use asm-generic/mmu_context.h for no-op implementations openrisc: use asm-generic/mmu_context.h for no-op implementations nios2: use asm-generic/mmu_context.h for no-op implementations nds32: use asm-generic/mmu_context.h for no-op implementations mips: use asm-generic/mmu_context.h for no-op implementations microblaze: use asm-generic/mmu_context.h for no-op implementations m68k: use asm-generic/mmu_context.h for no-op implementations ia64: use asm-generic/mmu_context.h for no-op implementations hexagon: use asm-generic/mmu_context.h for no-op implementations csky: use asm-generic/mmu_context.h for no-op implementations ...
2020-12-15Merge tag 'asm-generic-cleanup-5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic cleanups from Arnd Bergmann: "These are a couple of compiler warning fixes to make 'make W=2' less noisy, as well as some fixes to code comments in asm-generic" * tag 'asm-generic-cleanup-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: syscalls: Fix file comments for syscalls implemented in kernel/sys.c ctype.h: remove duplicate isdigit() helper qspinlock: use signed temporaries for cmpxchg asm-generic: fix ffs -Wshadow warning asm-generic: percpu: avoid Wshadow warning asm-generic/sembuf: Update architecture related information in comment
2020-12-15Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge yet more updates from Andrew Morton: - lots of little subsystems - a few post-linux-next MM material. Most of the rest awaits more merging of other trees. Subsystems affected by this series: alpha, procfs, misc, core-kernel, bitmap, lib, lz4, checkpatch, nilfs, kdump, rapidio, gcov, bfs, relay, resource, ubsan, reboot, fault-injection, lzo, apparmor, and mm (swap, memory-hotplug, pagemap, cleanups, and gup). * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (86 commits) mm: fix some spelling mistakes in comments mm: simplify follow_pte{,pmd} mm: unexport follow_pte_pmd apparmor: remove duplicate macro list_entry_is_head() lib/lzo/lzo1x_compress.c: make lzogeneric1x_1_compress() static fault-injection: handle EI_ETYPE_TRUE reboot: hide from sysfs not applicable settings reboot: allow to override reboot type if quirks are found reboot: remove cf9_safe from allowed types and rename cf9_force reboot: allow to specify reboot mode via sysfs reboot: refactor and comment the cpu selection code lib/ubsan.c: mark type_check_kinds with static keyword kcov: don't instrument with UBSAN ubsan: expand tests and reporting ubsan: remove UBSAN_MISC in favor of individual options ubsan: enable for all*config builds ubsan: disable UBSAN_TRAP for all*config ubsan: disable object-size sanitizer under GCC ubsan: move cc-option tests into Kconfig ubsan: remove redundant -Wno-maybe-uninitialized ...
2020-12-15mm: fix some spelling mistakes in commentsHaitao Shi
Fix some spelling mistakes in comments: udpate ==> update succesful ==> successful exmaple ==> example unneccessary ==> unnecessary stoping ==> stopping uknown ==> unknown Link: https://lkml.kernel.org/r/20201127011747.86005-1-shihaitao1@huawei.com Signed-off-by: Haitao Shi <shihaitao1@huawei.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Souptick Joarder <jrdr.linux@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15mm: simplify follow_pte{,pmd}Christoph Hellwig
Merge __follow_pte_pmd, follow_pte_pmd and follow_pte into a single follow_pte function and just pass two additional NULL arguments for the two previous follow_pte callers. [sfr@canb.auug.org.au: merge fix for "s390/pci: remove races against pte updates"] Link: https://lkml.kernel.org/r/20201111221254.7f6a3658@canb.auug.org.au Link: https://lkml.kernel.org/r/20201029101432.47011-3-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15mm: unexport follow_pte_pmdChristoph Hellwig
Patch series "simplify follow_pte a bit". This small series drops the not needed follow_pte_pmd exports, and simplifies the follow_pte family of functions a bit. This patch (of 2): follow_pte_pmd() is only used by the DAX code, which can't be modular. Link: https://lkml.kernel.org/r/20201029101432.47011-2-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15apparmor: remove duplicate macro list_entry_is_head()Andy Shevchenko
Strangely I hadn't had noticed the existence of the list_entry_is_head() in apparmor code when added the same one in the list.h. Luckily it's fully identical and didn't break builds. In any case we don't need a duplicate anymore, thus remove it from apparmor code. Link: https://lkml.kernel.org/r/20201208100639.88182-1-andriy.shevchenko@linux.intel.com Fixes: e130816164e244 ("include/linux/list.h: add a macro to test if entry is pointing to the head") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: John Johansen <john.johansen@canonical.com> Cc: James Morris <jmorris@namei.org> Cc: "Serge E . Hallyn " <serge@hallyn.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15lib/lzo/lzo1x_compress.c: make lzogeneric1x_1_compress() staticJason Yan
Fix the following sparse warning: lib/lzo/lzo1x_compress.c:304:5: warning: symbol 'lzogeneric1x_1_compress' was not declared. Should it be static? Link: https://lkml.kernel.org/r/20201020031415.136874-1-yanaijie@huawei.com Signed-off-by: Jason Yan <yanaijie@huawei.com> Cc: Dave Rodgman <dave.rodgman@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15fault-injection: handle EI_ETYPE_TRUEBarnabás Pőcze
Commit af3b854492f351d1 ("mm/page_alloc.c: allow error injection") introduced EI_ETYPE_TRUE, but did not extend * lib/error-inject.c:error_type_string(), and * kernel/fail_function.c:adjust_error_retval() to accommodate for this change. Handle EI_ETYPE_TRUE in both functions appropriately by * returning "TRUE" in error_type_string(), * adjusting the return value to true (1) in adjust_error_retval(). Furthermore, simplify the logic of handling EI_ETYPE_NULL in adjust_error_retval(). Link: https://lkml.kernel.org/r/njB1czX0ZgWPR9h61euHIBb5bEyePw9D4D2m3i5lc9Cl96P8Q1308dTcmsEZW7Vtz3Ifz4do-rOtSfuFTyGoEDYokkK2aUqBePVptzZEWfU=@protonmail.com Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15reboot: hide from sysfs not applicable settingsMatteo Croce
Not all the reboot settings from both the kernel command line or sysfs interface are available to all platforms. Filter out reboot_type and reboot_force which are x86 only, and also remove reboot_cpu on kernels without SMP support. This saves some space, and avoid confusing the user with settings which will have no effect. Link: https://lkml.kernel.org/r/20201130173717.198952-3-mcroce@linux.microsoft.com Signed-off-by: Matteo Croce <mcroce@microsoft.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit (git 2.34.1) at 2025-09-14 21:10:06 +0000