| Age | Commit message (Collapse) | Author |
|---|
|
For storing a value to a queue attribute, the queue_attr_store function
first freezes the queue (->q_usage_counter(io)) and then acquire
->sysfs_lock. This seems not correct as the usual ordering should be to
acquire ->sysfs_lock before freezing the queue. This incorrect ordering
causes the following lockdep splat which we are able to reproduce always
simply by accessing /sys/kernel/debug file using ls command:
[ 57.597146] WARNING: possible circular locking dependency detected
[ 57.597154] 6.12.0-10553-gb86545e02e8c #20 Tainted: G W
[ 57.597162] ------------------------------------------------------
[ 57.597168] ls/4605 is trying to acquire lock:
[ 57.597176] c00000003eb56710 (&mm->mmap_lock){++++}-{4:4}, at: __might_fault+0x58/0xc0
[ 57.597200]
but task is already holding lock:
[ 57.597207] c0000018e27c6810 (&sb->s_type->i_mutex_key#3){++++}-{4:4}, at: iterate_dir+0x94/0x1d4
[ 57.597226]
which lock already depends on the new lock.
[ 57.597233]
the existing dependency chain (in reverse order) is:
[ 57.597241]
-> #5 (&sb->s_type->i_mutex_key#3){++++}-{4:4}:
[ 57.597255] down_write+0x6c/0x18c
[ 57.597264] start_creating+0xb4/0x24c
[ 57.597274] debugfs_create_dir+0x2c/0x1e8
[ 57.597283] blk_register_queue+0xec/0x294
[ 57.597292] add_disk_fwnode+0x2e4/0x548
[ 57.597302] brd_alloc+0x2c8/0x338
[ 57.597309] brd_init+0x100/0x178
[ 57.597317] do_one_initcall+0x88/0x3e4
[ 57.597326] kernel_init_freeable+0x3cc/0x6e0
[ 57.597334] kernel_init+0x34/0x1cc
[ 57.597342] ret_from_kernel_user_thread+0x14/0x1c
[ 57.597350]
-> #4 (&q->debugfs_mutex){+.+.}-{4:4}:
[ 57.597362] __mutex_lock+0xfc/0x12a0
[ 57.597370] blk_register_queue+0xd4/0x294
[ 57.597379] add_disk_fwnode+0x2e4/0x548
[ 57.597388] brd_alloc+0x2c8/0x338
[ 57.597395] brd_init+0x100/0x178
[ 57.597402] do_one_initcall+0x88/0x3e4
[ 57.597410] kernel_init_freeable+0x3cc/0x6e0
[ 57.597418] kernel_init+0x34/0x1cc
[ 57.597426] ret_from_kernel_user_thread+0x14/0x1c
[ 57.597434]
-> #3 (&q->sysfs_lock){+.+.}-{4:4}:
[ 57.597446] __mutex_lock+0xfc/0x12a0
[ 57.597454] queue_attr_store+0x9c/0x110
[ 57.597462] sysfs_kf_write+0x70/0xb0
[ 57.597471] kernfs_fop_write_iter+0x1b0/0x2ac
[ 57.597480] vfs_write+0x3dc/0x6e8
[ 57.597488] ksys_write+0x84/0x140
[ 57.597495] system_call_exception+0x130/0x360
[ 57.597504] system_call_common+0x160/0x2c4
[ 57.597516]
-> #2 (&q->q_usage_counter(io)#21){++++}-{0:0}:
[ 57.597530] __submit_bio+0x5ec/0x828
[ 57.597538] submit_bio_noacct_nocheck+0x1e4/0x4f0
[ 57.597547] iomap_readahead+0x2a0/0x448
[ 57.597556] xfs_vm_readahead+0x28/0x3c
[ 57.597564] read_pages+0x88/0x41c
[ 57.597571] page_cache_ra_unbounded+0x1ac/0x2d8
[ 57.597580] filemap_get_pages+0x188/0x984
[ 57.597588] filemap_read+0x13c/0x4bc
[ 57.597596] xfs_file_buffered_read+0x88/0x17c
[ 57.597605] xfs_file_read_iter+0xac/0x158
[ 57.597614] vfs_read+0x2d4/0x3b4
[ 57.597622] ksys_read+0x84/0x144
[ 57.597629] system_call_exception+0x130/0x360
[ 57.597637] system_call_common+0x160/0x2c4
[ 57.597647]
-> #1 (mapping.invalidate_lock#2){++++}-{4:4}:
[ 57.597661] down_read+0x6c/0x220
[ 57.597669] filemap_fault+0x870/0x100c
[ 57.597677] xfs_filemap_fault+0xc4/0x18c
[ 57.597684] __do_fault+0x64/0x164
[ 57.597693] __handle_mm_fault+0x1274/0x1dac
[ 57.597702] handle_mm_fault+0x248/0x484
[ 57.597711] ___do_page_fault+0x428/0xc0c
[ 57.597719] hash__do_page_fault+0x30/0x68
[ 57.597727] do_hash_fault+0x90/0x35c
[ 57.597736] data_access_common_virt+0x210/0x220
[ 57.597745] _copy_from_user+0xf8/0x19c
[ 57.597754] sel_write_load+0x178/0xd54
[ 57.597762] vfs_write+0x108/0x6e8
[ 57.597769] ksys_write+0x84/0x140
[ 57.597777] system_call_exception+0x130/0x360
[ 57.597785] system_call_common+0x160/0x2c4
[ 57.597794]
-> #0 (&mm->mmap_lock){++++}-{4:4}:
[ 57.597806] __lock_acquire+0x17cc/0x2330
[ 57.597814] lock_acquire+0x138/0x400
[ 57.597822] __might_fault+0x7c/0xc0
[ 57.597830] filldir64+0xe8/0x390
[ 57.597839] dcache_readdir+0x80/0x2d4
[ 57.597846] iterate_dir+0xd8/0x1d4
[ 57.597855] sys_getdents64+0x88/0x2d4
[ 57.597864] system_call_exception+0x130/0x360
[ 57.597872] system_call_common+0x160/0x2c4
[ 57.597881]
other info that might help us debug this:
[ 57.597888] Chain exists of:
&mm->mmap_lock --> &q->debugfs_mutex --> &sb->s_type->i_mutex_key#3
[ 57.597905] Possible unsafe locking scenario:
[ 57.597911] CPU0 CPU1
[ 57.597917] ---- ----
[ 57.597922] rlock(&sb->s_type->i_mutex_key#3);
[ 57.597932] lock(&q->debugfs_mutex);
[ 57.597940] lock(&sb->s_type->i_mutex_key#3);
[ 57.597950] rlock(&mm->mmap_lock);
[ 57.597958]
*** DEADLOCK ***
[ 57.597965] 2 locks held by ls/4605:
[ 57.597971] #0: c0000000137c12f8 (&f->f_pos_lock){+.+.}-{4:4}, at: fdget_pos+0xcc/0x154
[ 57.597989] #1: c0000018e27c6810 (&sb->s_type->i_mutex_key#3){++++}-{4:4}, at: iterate_dir+0x94/0x1d4
Prevent the above lockdep warning by acquiring ->sysfs_lock before
freezing the queue while storing a queue attribute in queue_attr_store
function. Later, we also found[1] another function __blk_mq_update_nr_
hw_queues where we first freeze queue and then acquire the ->sysfs_lock.
So we've also updated lock ordering in __blk_mq_update_nr_hw_queues
function and ensured that in all code paths we follow the correct lock
ordering i.e. acquire ->sysfs_lock before freezing the queue.
[1] https://lore.kernel.org/all/CAFj5m9Ke8+EHKQBs_Nk6hqd=LGXtk4mUxZUN5==ZcCjnZSBwHw@mail.gmail.com/
Reported-by: kjain@linux.ibm.com
Fixes: af2814149883 ("block: freeze the queue in queue_attr_store")
Tested-by: kjain@linux.ibm.com
Cc: hch@lst.de
Cc: axboe@kernel.dk
Cc: ritesh.list@gmail.com
Cc: ming.lei@redhat.com
Cc: gjoyce@linux.ibm.com
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241210144222.1066229-1-nilay@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of fixes; all look small, device-specific and boring"
* tag 'sound-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: Intel: sof_sdw: Add space for a terminator into DAIs array
ASoC: fsl_spdif: change IFACE_PCM to IFACE_MIXER
ASoC: fsl_xcvr: change IFACE_PCM to IFACE_MIXER
ASoC: tas2781: Fix calibration issue in stress test
ASoC: audio-graph-card: Call of_node_put() on correct node
ASoC: amd: yc: Fix the wrong return value
ALSA: control: Avoid WARN() for symlink errors
sound: usb: format: don't warn that raw DSD is unsupported
sound: usb: enable DSD output for ddHiFi TC44C
ALSA: hda/realtek: Add new alc2xx-fixup-headset-mic model
ALSA: hda/ca0132: Use standard HD-audio quirk matching helpers
ALSA: usb-audio: Add implicit feedback quirk for Yamaha THR5
ALSA: hda/realtek - Add support for ASUS Zen AIO 27 Z272SD_A272SD audio
ALSA: hda/realtek: Fix headset mic on Acer Nitro 5
ALSA: hda: cs35l56: Remove calls to cs35l56_force_sync_asp1_registers_from_cache()
|
|
Pull documentation fix from Jonathan Corbet:
"A single fix for a docs-build regression caused by the
EXPORT_SYMBOL_NS() mass change"
* tag 'docs-6.13-fix' of git://git.lwn.net/linux:
scripts/kernel-doc: Get -export option working again
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fix from Vlastimil Babka:
- Fix for memcg unreclaimable slab stats drift when post-charging large
kmalloc allocations (Shakeel Butt)
* tag 'slab-for-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
memcg: slub: fix SUnreclaim for post charged objects
|
|
Merge series from Shengjiu Wang <shengjiu.wang@nxp.com>:
This function is base on the accelerator implementation
for compress API:
04177158cf98 ("ALSA: compress_offload: introduce accel operation mode")
Audio signal processing also has the requirement for memory to
memory similar as Video.
This asrc memory to memory (memory ->asrc->memory) case is a non
real time use case.
User fills the input buffer to the asrc module, after conversion, then asrc
sends back the output buffer to user. So it is not a traditional ALSA playback
and capture case.
Because we had implemented the "memory -> asrc ->i2s device-> codec"
use case in ALSA. Now the "memory->asrc->memory" needs
to reuse the code in asrc driver, so the patch 1 and patch 2 is for refining
the code to make it can be shared by the "memory->asrc->memory"
driver.
Other change is to add memory to memory support for two kinds of i.MX ASRC
modules.
|
|
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
This series adds KUnit tests for the cs_dsp module.
Most of the functionality in cs_dsp is for downloading firmware to
DSP memory and interacting with "control" words defined in that
memory. This doesn't require any emulation of running firmware,
because it is only reading and writing registers. So the testing can
be done using a dummy regmap. The way this is used to perform testing
is described in more detail in the commit message for each test.
ADSP1 is not tested because this was only used by the WM2200 codec,
a long-obsolete part that was discontinued in 2015.
|
|
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
A new set of tokens have been added to SOF topology to indicate that the pause
operation is supported or not on the given PCM device.
Pause is an optional feature that depends on pipeline, topology and modules
used by the PCM.
Add a pause_supported flag to snd_sof_pcm_stream and use this flag in Intel
platform code to keep the pause support enabled or to disable it.
|
|
It appears that the relatively popular RK3399 SoC has been put together
using a large amount of illicit substances, as experiments reveal that its
integration of GIC500 exposes the *secure* programming interface to
non-secure.
This has some pretty bad effects on the way priorities are handled, and
results in a dead machine if booting with pseudo-NMI enabled
(irqchip.gicv3_pseudo_nmi=1) if the kernel contains 18fdb6348c480 ("arm64:
irqchip/gic-v3: Select priorities at boot time"), which relies on the
priorities being programmed using the NS view.
Let's restore some sanity by going one step further and disable security
altogether in this case. This is not any worse, and puts us in a mode where
priorities actually make some sense.
Huge thanks to Mark Kettenis who initially identified this issue on
OpenBSD, and to Chen-Yu Tsai who reported the problem in Linux.
Fixes: 18fdb6348c480 ("arm64: irqchip/gic-v3: Select priorities at boot time")
Reported-by: Mark Kettenis <mark.kettenis@xs4all.nl>
Reported-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Chen-Yu Tsai <wens@csie.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20241213141037.3995049-1-maz@kernel.org
|
|
percpu_base is used in various percpu functions that expect variable in
__percpu address space. Correct the declaration of percpu_base to
void __iomem * __percpu *percpu_base;
to declare the variable as __percpu pointer.
The patch fixes several sparse warnings:
irq-gic.c:1172:44: warning: incorrect type in assignment (different address spaces)
irq-gic.c:1172:44: expected void [noderef] __percpu *[noderef] __iomem *percpu_base
irq-gic.c:1172:44: got void [noderef] __iomem *[noderef] __percpu *
...
irq-gic.c:1231:43: warning: incorrect type in argument 1 (different address spaces)
irq-gic.c:1231:43: expected void [noderef] __percpu *__pdata
irq-gic.c:1231:43: got void [noderef] __percpu *[noderef] __iomem *percpu_base
There were no changes in the resulting object files.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/all/20241213145809.2918-2-ubizjak@gmail.com
|
|
Instead of returning a generic NULL on error from
drm_dp_tunnel_mgr_create(), use error pointers with informative codes
to align the function with stub that is executed when
CONFIG_DRM_DISPLAY_DP_TUNNEL is unset. This will also trigger IS_ERR()
in current caller (intel_dp_tunnerl_mgr_init()) instead of bypassing it
via NULL pointer.
v2: use error codes inside drm_dp_tunnel_mgr_create() instead of handling
on caller's side (Michal, Imre)
v3: fixup commit message and add "CC"/"Fixes" lines (Andi),
mention aligning function code with stub
Fixes: 91888b5b1ad2 ("drm/i915/dp: Add support for DP tunnel BW allocation")
Cc: Imre Deak <imre.deak@intel.com>
Cc: <stable@vger.kernel.org> # v6.9+
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7q4fpnmmztmchczjewgm6igy55qt6jsm7tfd4fl4ucfq6yg2oy@q4lxtsu6445c
|
|
With KASAN enabled, clang fails to optimize the inline version of
vdec_vp9_slice_map_counts_eob_coef() properly, leading to kilobytes
of temporary values spilled to the stack:
drivers/media/platform/mediatek/vcodec/decoder/vdec/vdec_vp9_req_lat_if.c:1526:12: error: stack frame size (2160) exceeds limit (2048) in 'vdec_vp9_slice_update_prob' [-Werror,-Wframe-larger-than]
This seems to affect all versions of clang including the latest (clang-20),
but the degree of stack overhead is different per release.
Marking the function as noinline_for_stack is harmless here and avoids
the problem completely.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Make queue_iostats_passthrough_show() report 0/1 in sysfs instead of 0/4.
This patch fixes the following sparse warning:
block/blk-sysfs.c:266:31: warning: incorrect type in argument 1 (different base types)
block/blk-sysfs.c:266:31: expected unsigned long var
block/blk-sysfs.c:266:31: got restricted blk_flags_t
Cc: Keith Busch <kbusch@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Fixes: 110234da18ab ("block: enable passthrough command statistics")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241212212941.1268662-4-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move a statement that occurs in both branches of an if-statement in front
of the if-statement. Fix a typo in a source code comment. No functionality
has been changed.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20241212212941.1268662-3-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Since commit fde02699c242 ("block: mq-deadline: Remove support for zone
write locking"), the local variable 'insert_before' is assigned once and
is used once. Hence remove this local variable.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20241212212941.1268662-2-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When using svcr_in to check ZA and Streaming Mode, we should make sure
that the value in x2 is correct, otherwise it may trigger an Illegal
instruction if FEAT_SVE and !FEAT_SME.
Fixes: 43e3f85523e4 ("kselftest/arm64: Add SME support to syscall ABI test")
Signed-off-by: Weizhao Ouyang <o451686892@gmail.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241211111639.12344-1-o451686892@gmail.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
When a PASID is used for SVA by a device, it's possible that the PASID
entry is cleared before the device flushes all ongoing DMA requests and
removes the SVA domain. This can occur when an exception happens and the
process terminates before the device driver stops DMA and calls the
iommu driver to unbind the PASID.
There's no need to drain the PRQ in the mm release path. Instead, the PRQ
will be drained in the SVA unbind path.
Unfortunately, commit c43e1ccdebf2 ("iommu/vt-d: Drain PRQs when domain
removed from RID") changed this behavior by unconditionally draining the
PRQ in intel_pasid_tear_down_entry(). This can lead to a potential
sleeping-in-atomic-context issue.
Smatch static checker warning:
drivers/iommu/intel/prq.c:95 intel_iommu_drain_pasid_prq()
warn: sleeping in atomic context
To avoid this issue, prevent draining the PRQ in the SVA mm release path
and restore the previous behavior.
Fixes: c43e1ccdebf2 ("iommu/vt-d: Drain PRQs when domain removed from RID")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-iommu/c5187676-2fa2-4e29-94e0-4a279dc88b49@stanley.mountain/
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20241212021529.1104745-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The qi_batch is allocated when assigning cache tag for a domain. While
for nested parent domain, it is missed. Hence, when trying to map pages
to the nested parent, NULL dereference occurred. Also, there is potential
memleak since there is no lock around domain->qi_batch allocation.
To solve it, add a helper for qi_batch allocation, and call it in both
the __cache_tag_assign_domain() and __cache_tag_assign_parent_domain().
BUG: kernel NULL pointer dereference, address: 0000000000000200
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 8104795067 P4D 0
Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 223 UID: 0 PID: 4357 Comm: qemu-system-x86 Not tainted 6.13.0-rc1-00028-g4b50c3c3b998-dirty #2632
Call Trace:
? __die+0x24/0x70
? page_fault_oops+0x80/0x150
? do_user_addr_fault+0x63/0x7b0
? exc_page_fault+0x7c/0x220
? asm_exc_page_fault+0x26/0x30
? cache_tag_flush_range_np+0x13c/0x260
intel_iommu_iotlb_sync_map+0x1a/0x30
iommu_map+0x61/0xf0
batch_to_domain+0x188/0x250
iopt_area_fill_domains+0x125/0x320
? rcu_is_watching+0x11/0x50
iopt_map_pages+0x63/0x100
iopt_map_common.isra.0+0xa7/0x190
iopt_map_user_pages+0x6a/0x80
iommufd_ioas_map+0xcd/0x1d0
iommufd_fops_ioctl+0x118/0x1c0
__x64_sys_ioctl+0x93/0xc0
do_syscall_64+0x71/0x140
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fixes: 705c1cdf1e73 ("iommu/vt-d: Introduce batched cache invalidation")
Cc: stable@vger.kernel.org
Co-developed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20241210130322.17175-1-yi.l.liu@intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The current implementation removes cache tags after disabling ATS,
leading to potential memory leaks and kernel crashes. Specifically,
CACHE_TAG_DEVTLB type cache tags may still remain in the list even
after the domain is freed, causing a use-after-free condition.
This issue really shows up when multiple VFs from different PFs
passed through to a single user-space process via vfio-pci. In such
cases, the kernel may crash with kernel messages like:
BUG: kernel NULL pointer dereference, address: 0000000000000014
PGD 19036a067 P4D 1940a3067 PUD 136c9b067 PMD 0
Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 74 UID: 0 PID: 3183 Comm: testCli Not tainted 6.11.9 #2
RIP: 0010:cache_tag_flush_range+0x9b/0x250
Call Trace:
<TASK>
? __die+0x1f/0x60
? page_fault_oops+0x163/0x590
? exc_page_fault+0x72/0x190
? asm_exc_page_fault+0x22/0x30
? cache_tag_flush_range+0x9b/0x250
? cache_tag_flush_range+0x5d/0x250
intel_iommu_tlb_sync+0x29/0x40
intel_iommu_unmap_pages+0xfe/0x160
__iommu_unmap+0xd8/0x1a0
vfio_unmap_unpin+0x182/0x340 [vfio_iommu_type1]
vfio_remove_dma+0x2a/0xb0 [vfio_iommu_type1]
vfio_iommu_type1_ioctl+0xafa/0x18e0 [vfio_iommu_type1]
Move cache_tag_unassign_domain() before iommu_disable_pci_caps() to fix
it.
Fixes: 3b1d9e2b2d68 ("iommu/vt-d: Add cache tag assignment interface")
Cc: stable@vger.kernel.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20241129020506.576413-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Commit eaf62ce1563b ("arm64/signal: Set up and restore the GCS
context for signal handlers") introduced a potential failure point
at the end of setup_return(). This is unfortunate as it is too late
to deliver a SIGSEGV: if that SIGSEGV is handled, the subsequent
sigreturn will end up returning to the original handler, which is
not the intention (since we failed to deliver that signal).
Make sure this does not happen by calling gcs_signal_entry()
at the very beginning of setup_return(), and add a comment just
after to discourage error cases being introduced from that point
onwards.
While at it, also take care of copy_siginfo_to_user(): since it may
fail, we shouldn't be calling it after setup_return() either. Call
it before setup_return() instead, and move the setting of X1/X2
inside setup_return() where it belongs (after the "point of no
failure").
Background: the first part of setup_rt_frame(), including
setup_sigframe(), has no impact on the execution of the interrupted
thread. The signal frame is written to the stack, but the stack
pointer remains unchanged. Failure at this stage can be recovered by
a SIGSEGV handler, and sigreturn will restore the original context,
at the point where the original signal occurred. On the other hand,
once setup_return() has updated registers including SP, the thread's
control flow has been modified and we must deliver the original
signal.
Fixes: eaf62ce1563b ("arm64/signal: Set up and restore the GCS context for signal handlers")
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241210160940.2031997-1-kevin.brodsky@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm FF-A fix for v6.13
A single fix to address a possible race around setting ffa_dev->properties
in ffa_device_register() by updating ffa_device_register() to take all
the partition information received from the firmware and updating the
struct ffa_device accordingly before registering the device to the
bus/driver model in the kernel.
* tag 'ffa-fix-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Fix the race around setting ffa_dev->properties
Link: https://lore.kernel.org/r/20241210101113.3232602-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The following definitions have no users: SOF_DAI_STREAM() and SOF_FORMATS,
they can be dropped from the header file.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://patch.msgid.link/20241213131717.24071-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the SOF_IPC4_MOD_EXT_PARAM_SIZE() macro to set the param size in the
extension part of the IPC message for clarity.
No Functional change as the PARMA_SIZE offset is at 0.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20241213132110.27800-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Test that the cs_dsp_client_ops callbacks are called when expected.
pre_run, post_run - when cs_dsp_run() is called.
pre_stop, post_stop - when cs_dsp_stop() is called
control_add - when a WMFW is loaded
control_remove - when cs_dsp_remove() is called
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241212143725.1381013-13-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add tests for various types of errors and illegal values in
wmfw files. This covers buffer overflows as well as general
unsupported field values.
There are several sets of test cases to cover various different
versions of the wmfw file format.
V0 format was only used on the earlier ADSP2 devices. It does
not have algorithm blocks.
V1 format is used on all ADSP2 versions. It added algorithm
blocks and firmware coefficient descriptor blocks. Strings
are stored in fixed-length arrays.
V2 format is used on all ADSP2 versions. It is similar to V1
but space for strings is variable-length with either an 8-bit
or 16-bit length field.
V3 format is used on Halo Core DSPs and is mostly identical to
the V3 format.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241212143725.1381013-12-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add tests for various types of errors and illegal values in
bin files. This covers buffer overflows as well as general
unsupported field values.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241212143725.1381013-11-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add KUnit test cases for control read/write.
Tests cases cover general reading and writing of controls:
1) Read/write at offset position in control.
2) Read/write of various lengths less than length of the control.
3) Rejecting illegal arguments.
The test cases are run for ADSP2 with 16-bit registers, ADSP2
with 32-bit registers and Halo Core with 32-bit registers. The
ADSP2 cases are further divided into runs for V1 and V2 format
WMFW files, because there are differences in how V1 and V2
defines controls.
The obsolete V0 format does not have controls, so no testing of
that format is needed.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241212143725.1381013-10-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add KUnit test cases for the caching of control content.
The test cases can be divided into four groups:
1) The cache is correctly initialized when the firmware is first
downloaded.
2) Reads return the correct data.
3) Writes update the registers and cache.
4) If a value has been written to the control it is retained in
the cache and written out to the registers when the firmware
is started.
There are multiple test suites to cover:
- V1 and V2 format files on 16-bit and 32-bit ADSP2.
- V3 format files on Halo Core DSPs.
V1 format files, and some V2 format files, didn't provide access
flags for the controls. There are a couple of test cases for
unspecified flags to ensure backwards compatibility with the
original implementation of these older firmware versions.
The obsolete V0 format does not have controls, so no testing of
that format is needed.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241212143725.1381013-9-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add KUnit test cases for parsing of firmware controls out of the
wmfw. These test cases are only testing that the data in the wmfw
is correctly interpreted and entered into the list of controls.
The test cases can be roughly divided into three types:
1) The correct values are extracted from the wmfw.
2) Variable-length strings are handled correctly.
3) Controls are correctly identified as unique or identical.
There are multiple test suites to cover:
- V1 and V2 format files on 16-bit and 32-bit ADSP2.
- V3 format files on Halo Core DSPs.
V1 format does not have named controls, and the strings in the
coefficient descriptor are fixed-length fields. On V2 and V3 format
the controls are named and all strings are variable-length.
The obsolete V0 format does not have controls, so no testing of
that format is needed.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241212143725.1381013-8-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This adds a KUnit test suite to test downloading wmfw files.
The general technique is
1. Create mock wmfw file content
2. Tell cs_dsp to download the wmfw file
3. Check in the emulated regmap registers that the correct values have
been written to DSP memory
4. Drop the regmap cache for the expected written registers and then do a
regcache_sync() to check for unexpected writes to other registers.
The test covers ADSP2 v1 and v2, and HALO Core DSPs. (ADSP1 is very
obsolete so isn't tested).
There is a large number of test cases and parameterized variants of tests
because of the many different addressing schemes supported by the Cirrus
devices. The DSP has 2 or 3 memory spaces: XM, YM and ZM. The DSP sees
these using its native addressing, which is word-addressed (not
byte-addressed). The host sees these through one of several register
mappings (depending on the DSP type and parent codec family). The
registers have three different addressing schemes: 16-bit registers
addressed by register number, 32-bit registers addressed by register
number, or 32-bit registers addressed by byte (with a stride of 4). In
addition to these multiple addressing schemes, the Halo Core DSPs have a
"packed" register mapping that maps 4 DSP words into 3 registers. In
addition to this there are 4 versions of the wmfw file format to be
tested.
The test cases intentionally have relatively little factoring-out of
similar code. This makes it much easier to visually verify that a test
case is testing correctly, and what exactly it is testing. Factoring out
large amounts of code into helper functions tends to obscure what the
actual test procedure is, so increasing the chance of hidden errors where
test cases don't actually test as intended.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241212143725.1381013-7-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This adds a KUnit test suite to test downloading bin files.
The general technique is
1. Create mock bin file content
2. Tell cs_dsp to download the bin file
3. Check in the emulated regmap registers that the correct values have
been written to DSP memory
4. Drop the regmap cache for the expected written registers and then do a
regcache_sync() to check for unexpected writes to other registers.
The test covers ADSP2 v1 and v2, and HALO Core DSPs. (ADSP1 is very
obsolete so isn't tested).
There is a large number of test cases and parameterized variants of tests
because of the many different addressing schemes supported by the Cirrus
devices. The DSP has 2 or 3 memory spaces: XM, YM and ZM. The DSP sees
these using its native addressing, which is word-addressed (not
byte-addressed). The host sees these through one of several register
mappings (depending on the DSP type and parent codec family). The
registers have three different addressing schemes: 16-bit registers
addressed by register number, 32-bit registers addressed by register
number, or 32-bit registers addressed by byte (with a stride of 4). In
addition to these multiple addressing schemes, the Halo Core DSPs have a
"packed" register mapping that maps 4 DSP words into 3 registers. The bin
file addresses the data blob relative to the base address of an algorithm,
which has to be calculated in both DSP words (for the DSP to access) and
register addresses (for the host).
This results in many different addressing schemes used in parallel, hence
the complexity of the address and size manipulation in the test cases:
word addresses in DSP memory, byte offsets, word offsets, register
addresses (either byte-addressed 32-bit or index-addressed 16-bit), and
packed register addresses.
The test cases intentionally have relatively little factoring-out of
similar code. This makes it much easier to visually verify that a test
case is testing correctly, and what exactly it is testing. Factoring out
large amounts of code into helper functions tends to obscure what the
actual test procedure is, so increasing the chance of hidden errors where
test cases don't actually test as intended.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241212143725.1381013-6-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a mock firmware file that emulates what the firmware build tools
would normally create. This will be used by KUnit tests to generate a
test bin file.
The data payload in a bin is an opaque blob, so the mock bin only needs
to generate the appropriate file header and description block for each
payload blob.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241212143725.1381013-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a mock firmware file that emulates what the firmware build tools
would normally create. This will be used by KUnit tests to generate a
test wmfw file.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241212143725.1381013-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add helper functions to implement an emulation of the DSP memory map.
There are three main groups of functionality:
1. Define a mock cs_dsp_region table.
2. Calculate the addresses of memory and algorithms from the firmware
header in XM.
3. Build a mock XM header in emulated XM.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241212143725.1381013-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a mock regmap implementation to act as a simulated DSP for KUnit
testing. This is built as a utility module so that it could be used by
clients of cs_dsp to create a mock "DSP" for their own testing.
cs_dsp interacts with the DSP only through registers. Most of the
register space of the DSP is RAM. ADSP cores have a small set of control
registers. HALO Core DSPs have a much larger set of control registers but
only a small subset are used.
Most writes are "blind" in the sense that cs_dsp does not expect to
receive any sort of response from the DSP. So there isn't any need to
emulate a "DSP", only a set of registers that can be written and read
back.
The idea of the mock regmap is to use the cache to accumulate writes
which can then be tested against the values that are expected to be in
the registers.
Stray writes can be detected by dropping the cache entries for all
addresses that should have been written and then issuing a regcache_sync().
If this causes bus writes it means there were writes to unexpected
registers.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241212143725.1381013-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If the stream's pause_supported flag is false then mask out the PAUSE
support, so user space will be prevented to use it.
Introduce a module parameter to ignore the pause_supported flag, named as
force_pause_support to allow testing of the PAUSE feature.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://patch.msgid.link/20241213101123.27318-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
New tokens are added to topology:
1202: SOF_TKN_STREAM_PLAYBACK_PAUSE_SUPPORTED
1203: SOF_TKN_STREAM_CAPTURE_PAUSE_SUPPORTED
The new tokens are used to advertise support for PAUSE/RESUME operation on
a PCM device depending on firmware product, use case, pipeline topology.
The snd_sof_pcm_stream.pause_supported is updated to reflect the advertised
value for the PCM device.
If the token does not exist then the pause_supported is set to false.
Note: it is up to the platform code to use this flag to decide to advertise
the PAUSE support for user space or not.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://patch.msgid.link/20241213101123.27318-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The "ATHEROS ATH GENERIC UTILITIES" entry shares the same git tree as
the ATH10K, ATH11K, and ATH12K entries which I already maintain, so
add me to that entry as well.
Signed-off-by: Jeff Johnson <jjohnson@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241212-ath-maintainer-v1-1-7ea5e86780a8@kernel.org
|
|
We had BE201 hard coded.
Look at the RF_ID and decide based on its value.
Fixes: 6795a37161fb ("wifi: iwlwifi: Print a specific device name.")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241212132940.b9eebda1ca60.I36791a134ed5e538e059418eb6520761da97b44c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
dlserver time is accounted when:
- dlserver is active and the dlserver proxies the cfs task.
- dlserver is active but deferred and cfs task runs after being picked
through the normal fair class pick.
dl_server_update is called in two places to make sure that both the
above times are accounted for. But it doesn't check if dlserver is
active or not. Now that we have this dl_server_active flag, we can
consolidate dl_server_update into one place and all we need to check is
whether dlserver is active or not. When dlserver is active there is only
two possible conditions:
- dlserver is deferred.
- cfs task is running on behalf of dlserver.
Fixes: a110a81c52a9 ("sched/deadline: Deferrable dl server")
Signed-off-by: "Vineeth Pillai (Google)" <vineeth@bitbyteword.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Marcel Ziswiler <marcel.ziswiler@codethink.co.uk> # ROCK 5B
Link: https://lore.kernel.org/r/20241213032244.877029-2-vineeth@bitbyteword.org
|
|
dlserver can get dequeued during a dlserver pick_task due to the delayed
deueue feature and this can lead to issues with dlserver logic as it
still thinks that dlserver is on the runqueue. The dlserver throttling
and replenish logic gets confused and can lead to double enqueue of
dlserver.
Double enqueue of dlserver could happend due to couple of reasons:
Case 1
------
Delayed dequeue feature[1] can cause dlserver being stopped during a
pick initiated by dlserver:
__pick_next_task
pick_task_dl -> server_pick_task
pick_task_fair
pick_next_entity (if (sched_delayed))
dequeue_entities
dl_server_stop
server_pick_task goes ahead with update_curr_dl_se without knowing that
dlserver is dequeued and this confuses the logic and may lead to
unintended enqueue while the server is stopped.
Case 2
------
A race condition between a task dequeue on one cpu and same task's enqueue
on this cpu by a remote cpu while the lock is released causing dlserver
double enqueue.
One cpu would be in the schedule() and releasing RQ-lock:
current->state = TASK_INTERRUPTIBLE();
schedule();
deactivate_task()
dl_stop_server();
pick_next_task()
pick_next_task_fair()
sched_balance_newidle()
rq_unlock(this_rq)
at which point another CPU can take our RQ-lock and do:
try_to_wake_up()
ttwu_queue()
rq_lock()
...
activate_task()
dl_server_start() --> first enqueue
wakeup_preempt() := check_preempt_wakeup_fair()
update_curr()
update_curr_task()
if (current->dl_server)
dl_server_update()
enqueue_dl_entity() --> second enqueue
This bug was not apparent as the enqueue in dl_server_start doesn't
usually happen because of the defer logic. But as a side effect of the
first case(dequeue during dlserver pick), dl_throttled and dl_yield will
be set and this causes the time accounting of dlserver to messup and
then leading to a enqueue in dl_server_start.
Have an explicit flag representing the status of dlserver to avoid the
confusion. This is set in dl_server_start and reset in dlserver_stop.
Fixes: 63ba8422f876 ("sched/deadline: Introduce deadline servers")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: "Vineeth Pillai (Google)" <vineeth@bitbyteword.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Marcel Ziswiler <marcel.ziswiler@codethink.co.uk> # ROCK 5B
Link: https://lkml.kernel.org/r/20241213032244.877029-1-vineeth@bitbyteword.org
|
|
The shutdown function can be called when the display is already
unprepared. For example during reboot this trigger a kernel
backlog. Calling the drm_panel_unprepare, allow us to avoid
to trigger the kernel warning.
Fixes: 2e87bad7cd33 ("drm/panel: Add Synaptics R63353 panel driver")
Tested-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Link: https://lore.kernel.org/r/20241205163002.1804784-1-dario.binacchi@amarulasolutions.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241205163002.1804784-1-dario.binacchi@amarulasolutions.com
|
|
The DSI host must be enabled for the panel to be initialized in
prepare(). Set the prepare_prev_first flag to guarantee this.
This fixes the panel operation on NXP i.MX8MP SoC / Samsung DSIM
DSI host.
Fixes: 849b2e3ff969 ("drm/panel: Add Sitronix ST7701 panel driver")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Link: https://lore.kernel.org/r/20241124224812.150263-1-marex@denx.de
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241124224812.150263-1-marex@denx.de
|
|
mipi_dsi_device_register_full() never returns NULL pointer, it
will return ERR_PTR() when it fails, so replace the check with
IS_ERR().
Fixes: 623a3531e9cf ("drm/panel: Add driver for Novatek NT35950 DSI DriverIC panels")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241029123957.1588-1-yangyingliang@huaweicloud.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241029123957.1588-1-yangyingliang@huaweicloud.com
|
|
drm_mode_duplicate() could return NULL due to lack of memory,
which will then call NULL pointer dereference. Add a check to
prevent it.
Fixes: 0ef94554dc40 ("drm/panel: himax-hx83102: Break out as separate driver")
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241025073408.27481-3-zhangzekun11@huawei.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241025073408.27481-3-zhangzekun11@huawei.com
|
|
Register m2m platform device,that user can
use M2M feature.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Link: https://patch.msgid.link/20241212074509.3445859-7-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Register m2m platform device, that user can
use M2M feature.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Link: https://patch.msgid.link/20241212074509.3445859-6-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Implement the ASRC memory to memory function using
the compress framework, user can use this function with
compress ioctl interface.
This feature can be shared by ASRC and EASRC drivers
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Link: https://patch.msgid.link/20241212074509.3445859-5-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ASRC can be used on memory to memory case, define several
functions for m2m usage and export them as function pointer.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Link: https://patch.msgid.link/20241212074509.3445859-4-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ASRC can be used on memory to memory case, define several
functions for m2m usage.
m2m_prepare: prepare for the start step
m2m_start: the start step
m2m_unprepare: unprepare for stop step, optional
m2m_stop: stop step
m2m_check_format: check format is supported or not
m2m_calc_out_len: calculate output length according to input length
m2m_get_maxburst: burst size for dma
m2m_pair_suspend: suspend function of pair, optional.
m2m_pair_resume: resume function of pair
get_output_fifo_size: get remaining data size in FIFO
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Link: https://patch.msgid.link/20241212074509.3445859-3-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add 'pcm_format' for struct snd_codec, add 'pcm_formats' for
struct snd_codec_desc, these are used for accelerator usage.
Current accelerator example is sample rate converter (SRC).
Define struct snd_codec_desc_src for descript minmum and maxmum
sample rates. And add 'src_d' in union snd_codec_options
structure. These are mainly used for capbility query.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://patch.msgid.link/20241212074509.3445859-2-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
