| Age | Commit message (Collapse) | Author |
|---|
|
Convert the mtk-pmic-keys to DT schema format.
The old binding was missing documentation for key press/release
interrupts, even though it was supported in hardware and driver,
so support for the same was added during the conversion.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220914103021.43593-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Noticed this while trying to debug some unrelated issues: this laptop has
the ability to use rmi4 but doesn't by default. So let's fix that.
Tested locally, including mouse buttons, on my ThinkPad P1 G3. This might
also enable the X1 Extreme G3, but I don't have such a system to test
locally (presumably Mark can chime in if that's the case).
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20220909202127.141761-1-lyude@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Some devices expose an ultra-low-power (ULP) mode entry mask for
each channel. If the mask is set, the device cannot enter ULP so
long as the corresponding channel remains in an active state.
The vendor has advised setting the mask for any disabled channel.
To accommodate this suggestion, initially set all masks and then
clear them only if specified in the device tree.
Fixes: e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20220908131548.48120-8-jeff@labundy.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Add a check to prevent sending undefined events, which ultimately
map to SYN_REPORT.
Fixes: e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20220908131548.48120-7-jeff@labundy.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
According to the datasheets, writing only 0xFF is sufficient to
elicit a communication window. Remove the superfluous 0x00 from
the force communication command.
Fixes: e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20220908131548.48120-6-jeff@labundy.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Add support for PMIC Keys of the MT6331 PMIC.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20220913123941.385349-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Delete the redundant word 'to'.
Signed-off-by: wangjianli <wangjianli@cdjrlc.com>
Link: https://lore.kernel.org/r/20220908131043.37099-1-wangjianli@cdjrlc.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
An effort has been made to support every official model and firmware
version I could track down info on. The following controllers _should_
have working paddles with this PR:
- Xbox Elite (**untested**)
- Xbox Elite Series 2 on early firmwares (**untested**)
- Xbox Elite Series 2 on v4 firmwares (Tested v4.8.1908.0)
- Xbox Elite Series 2 on v5 pre-BLE firmwares (**untested**)
- Xbox Elite Series 2 on v5 post-BLE firmwares (Tested v5.13.3143.0)
This patch also introduces correct handling for the Elite 1 controller
and properly suppresses paddle inputs when using a custom profile slot.
Starting with firmware v5.11, certain inputs for the Elite 2 were moved
to an extra packet that is not enabled by default.
We must first manually enable this extra packet in order to correctly
process paddle input data with these later firmwares.
Signed-off-by: Christopher Crockett <chaorace@gmail.com>
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Tested-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20220818154411.510308-5-rojtberg@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Newer gamepads turn themselves off when the mode button is held down.
For XBOX360W gamepads we must do this in the driver.
Do not use BIT() macro for consistency within the file.
Signed-off-by: Santosh De Massari <s.demassari@gmail.com>
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Link: https://lore.kernel.org/r/20220818154411.510308-4-rojtberg@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Suspending and resuming the system can sometimes cause the out
URB to get hung after a reset_resume. This causes LED setting
and force feedback to break on resume. To avoid this, just drop
the reset_resume callback so the USB core rebinds xpad to the
wireless pads on resume if a reset happened.
A nice side effect of this change is the LED ring on wireless
controllers is now set correctly on system resume.
Cc: stable@vger.kernel.org
Fixes: 4220f7db1e42 ("Input: xpad - workaround dead irq_out after suspend/ resume")
Signed-off-by: Cameron Gutman <aicommander@gmail.com>
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Link: https://lore.kernel.org/r/20220818154411.510308-3-rojtberg@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
This is based on multiple commits at https://github.com/paroj/xpad
Cc: stable@vger.kernel.org
Signed-off-by: Jasper Poppe <jgpoppe@gmail.com>
Signed-off-by: Jeremy Palmer <jpalmer@linz.govt.nz>
Signed-off-by: Ruineka <ruinairas1992@gmail.com>
Signed-off-by: Cleber de Mattos Casali <clebercasali@gmail.com>
Signed-off-by: Kyle Gospodnetich <me@kylegospodneti.ch>
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Link: https://lore.kernel.org/r/20220818154411.510308-2-rojtberg@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
STMPE driver does not require a specific node name anymore, only the
compatible is checked, update binding according to this.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220712163345.445811-6-francesco.dolcini@toradex.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The driver core now has the ability to handle the creation and removal
of device-specific sysfs files, let's use it instead of registering and
unregistering attributes by hand.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220903051119.1332808-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The driver core now has the ability to handle the creation and removal
of device-specific sysfs files, let's use it instead of registering and
unregistering attributes by hand.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220903051119.1332808-2-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The driver core now has the ability to handle the creation and removal
of device-specific sysfs files, let's use it instead of registering and
unregistering attributes by hand.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220903051119.1332808-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Add RT5120 PMIC power key support.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1660100142-32493-4-git-send-email-u0084500@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Clarify properties definition, drop unused pinctrl-2 state 'gpio'.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220712101619.326120-3-francesco.dolcini@toradex.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Any IIO ADC can be used with the driver, so do not depend
on VF610_ADC.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20220712101619.326120-2-francesco.dolcini@toradex.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
With the new PM macros (DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()), the
compiler has visibility to see that the functions are not used when
!CONFIG_PM and hence, remove the dead code. As such, there's no need
for '__maybe_unused'.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220829131553.690063-11-nuno.sa@analog.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Support feeding VCC through a regulator.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220829131553.690063-10-nuno.sa@analog.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Optionally reset the device during probe.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220829131553.690063-9-nuno.sa@analog.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Just some code cleanup regarding coding style. With the introduction of
the bits.h macros changes in the code are indeed introduced.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220829131553.690063-8-nuno.sa@analog.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
There's no need for an extra check for 'client-irq'. Just let it fail when
calling 'request_irq()'.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220829131553.690063-7-nuno.sa@analog.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Add device tree bindings for the adp5588-keys driver.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220829131553.690063-6-nuno.sa@analog.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Use firmware properties (eg: OF) to get the device specific
configuration. This change just replaces the platform data since there
was no platform using it and so, it makes no sense having both.
Special note to the PULL-UP disable setting that is now supported as
part of the gpio subsystem (using 'set_config()' callback).
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220829131553.690063-5-nuno.sa@analog.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Don't continue in code paths after some error is found. It makes no
sense to do any other device configuration if a previous one failed.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220829131553.690063-4-nuno.sa@analog.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
With commit 9d2b2e83ef27 ("Input: adp5588-keys - support gpi key events as
'gpio keys'") the irchip functionality is directly supported in the input
driver as the main goal of these pins is to be used as gpio keys. Hence,
this driver can be removed.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220829131553.690063-3-nuno.sa@analog.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
This change replaces the support for GPIs as key event generators.
Instead of reporting the events directly, we add a gpio based irqchip
so that these events can be consumed by keys defined in the gpio-keys
driver (as it's goal is indeed for keys on GPIOs capable of generating
interrupts). With this, the gpio-adp5588 driver can also be dropped.
The basic idea is that all the pins that are not being used as part of
the keymap matrix can be possibly requested as GPIOs by gpio-keys
(it's also fine to use these pins as plain interrupts though that's not
really the point).
Since the gpiochip now also has irqchip capabilities, we should only
remove it after we free the device interrupt (otherwise we could, in
theory, be handling GPIs interrupts while the gpiochip is concurrently
removed). Thus the call 'adp5588_gpio_add()' is moved and since the
setup phase also needs to come before making the gpios visible, we also
need to move 'adp5588_setup()'.
While at it, always select GPIOLIB so that we don't need to use #ifdef
guards.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220829131553.690063-2-nuno.sa@analog.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
As a preparation to unexport of_gpio_named_count(), convert the
driver to use gpiod_count() instead.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220830183552.50695-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
There is no such dependency in the driver, but it's implicitly
used to have OF property APIs available. Replace that by device
property API and get rid of OF_GPIO dependency.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220830182839.47965-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Add a new iforce_device entry to support the Boeder Force Feedback Wheel
device.
Signed-off-by: Greg Tulli <greg.iforce@gmail.com>
Link: https://lore.kernel.org/r/3256420-c8ac-31b-8499-3c488a9880fd@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
syzbot is reporting hung task at __input_unregister_device() [1], for
iforce_close() waiting at wait_event_interruptible() with dev->mutex held
is blocking input_disconnect_device() from __input_unregister_device().
It seems that the cause is simply that commit c2b27ef672992a20 ("Input:
iforce - wait for command completion when closing the device") forgot to
call wake_up() after clear_bit().
Fix this problem by introducing a helper that calls clear_bit() followed
by wake_up_all().
Reported-by: syzbot <syzbot+deb6abc36aad4008f407@syzkaller.appspotmail.com>
Fixes: c2b27ef672992a20 ("Input: iforce - wait for command completion when closing the device")
Tested-by: syzbot <syzbot+deb6abc36aad4008f407@syzkaller.appspotmail.com>
Suggested-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Co-developed-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Link: https://lore.kernel.org/r/887021c3-4f13-40ce-c8b9-aa6e09faa3a7@I-love.SAKURA.ne.jp
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Add compatible string for GT1158 missing from the previous patch.
Fixes: 425fe4709c76 ("Input: goodix - add support for GT1158")
Signed-off-by: Jarrah Gosbell <kernel@undef.tools>
Link: https://lore.kernel.org/r/20220813043821.9981-1-kernel@undef.tools
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Maintainers of the directory Documentation/devicetree/bindings/input
are also the maintainers of the corresponding directory
include/dt-bindings/input.
Add the file entry for include/dt-bindings/input to the appropriate
section in MAINTAINERS.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20220613115654.28117-1-lukas.bulwahn@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220818210156.8143-1-wsa+renesas@sang-engineering.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Add the module alias so the rk805-pwrkey driver will
autoload when built as a module.
Fixes: 5a35b85c2d92 ("Input: add power key driver for Rockchip RK805 PMIC")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20220612225437.3628788-1-pbrobinson@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220818210022.6865-1-wsa+renesas@sang-engineering.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Add polled input device support to the adc-joystick driver. This is
useful for devices which do not have hardware capable triggers on
their SARADC. Code modified from adc-joystick.c changes made by Maya
Matuszczyk.
Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20220816210440.14260-3-macroalpha82@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Add poll-interval support for the adc-joystick documentation. This is
an optional value and if not provided the adc-joystick works as it
does today (with buffers). If this value is provided, the adc-joystick
driver is polled at the specified interval. The existing attribute of
"poll-interval" was used instead of complying with property-units.yaml
after discussion of the issue on the mailing list.
Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Artur Rojek <contact@artur-rojek.eu>
Link: https://lore.kernel.org/r/20220816210440.14260-2-macroalpha82@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Add a driver to get the button events from the panel and provide
them to userspace with the input subsystem. The panel is
connected with I2C and controls the bus, so the driver registers
as an I2C slave device.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> # I2C slave parts
Link: https://lore.kernel.org/r/20220809204147.238132-3-eajames@linux.ibm.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Document the bindings for the IBM Operation Panel, which provides
a simple interface to control a server. It has a display and three
buttons.
Also update MAINTAINERS for the new file.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220809204147.238132-2-eajames@linux.ibm.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into next
Sync up with the latest I2C code base to get updated prototype of I2C
bus remove() method.
|
|
The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)
So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.
Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/*
Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5
Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio
Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860
Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b
Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes
Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
All platforms that provide a teardown callback return 0. New users are
supposed to not make use of platform support, so there is no
functionality lost.
This patch is a preparation for making i2c remove callbacks return void.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Returning an error value in an i2c remove callback results in a generic
error message being emitted by the i2c core, but otherwise it doesn't
make a difference. The device goes away anyhow and the devm cleanups are
called.
So instead of triggering the generic i2c error message, emit a more
helpful message if a problem occurs and return 0 to suppress the generic
message.
This patch is a preparation for making i2c remove callbacks return void.
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
The mutex might still be in use until the devm cleanup callback
devm_led_classdev_flash_release() is called. This only happens some time
after lm3601x_remove() completed.
Fixes: e63a744871a3 ("leds: lm3601x: Convert class registration to device managed")
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Returning an error value from an i2c remove callback results in an error
message being emitted by the i2c core, but otherwise it doesn't make a
difference. The device goes away anyhow and the devm cleanups are
called.
As lm3697_remove() already emits an error message on failure and the
additional error message by the i2c core doesn't add any useful
information, don't pass the error value up the stack. Instead continue
to clean up and return 0.
This patch is a preparation for making i2c remove callbacks return void.
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
A remove callback that just returns 0 is equivalent to no callback at all
as can be seen in i2c_device_remove(). So simplify accordingly.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
|
|
Radix tree header includes gfp.h for __GFP_BITS_SHIFT only. Now we
have gfp_types.h for this.
Fixes powerpc allmodconfig build:
In file included from include/linux/nodemask.h:97,
from include/linux/mmzone.h:17,
from include/linux/gfp.h:7,
from include/linux/radix-tree.h:12,
from include/linux/idr.h:15,
from include/linux/kernfs.h:12,
from include/linux/sysfs.h:16,
from include/linux/kobject.h:20,
from include/linux/pci.h:35,
from arch/powerpc/kernel/prom_init.c:24:
include/linux/random.h: In function 'add_latent_entropy':
>> include/linux/random.h:25:46: error: 'latent_entropy' undeclared (first use in this function); did you mean 'add_latent_entropy'?
25 | add_device_randomness((const void *)&latent_entropy, sizeof(latent_entropy));
| ^~~~~~~~~~~~~~
| add_latent_entropy
include/linux/random.h:25:46: note: each undeclared identifier is reported only once for each function it appears in
Reported-by: kernel test robot <lkp@intel.com>
CC: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
