summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-03-04iommu: Don't use lazy flush for untrusted deviceLu Baolu
The lazy IOTLB flushing setup leaves a time window, in which the device can still access some system memory, which has already been unmapped by the device driver. It's not suitable for untrusted devices. A malicious device might use this to attack the system by obtaining data that it shouldn't obtain. Fixes: c588072bba6b5 ("iommu/vt-d: Convert intel iommu driver to the iommu ops") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20210225061454.2864009-1-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-03-04iommu/tegra-smmu: Fix mc errors on tegra124-nyanNicolin Chen
Commit 25938c73cd79 ("iommu/tegra-smmu: Rework tegra_smmu_probe_device()") removed certain hack in the tegra_smmu_probe() by relying on IOMMU core to of_xlate SMMU's SID per device, so as to get rid of tegra_smmu_find() and tegra_smmu_configure() that are typically done in the IOMMU core also. This approach works for both existing devices that have DT nodes and other devices (like PCI device) that don't exist in DT, on Tegra210 and Tegra3 upon testing. However, Page Fault errors are reported on tegra124-Nyan: tegra-mc 70019000.memory-controller: display0a: read @0xfe056b40: EMEM address decode error (SMMU translation error [--S]) tegra-mc 70019000.memory-controller: display0a: read @0xfe056b40: Page fault (SMMU translation error [--S]) After debugging, I found that the mentioned commit changed some function callback sequence of tegra-smmu's, resulting in enabling SMMU for display client before display driver gets initialized. I couldn't reproduce exact same issue on Tegra210 as Tegra124 (arm-32) differs at arch-level code. Actually this Page Fault is a known issue, as on most of Tegra platforms, display gets enabled by the bootloader for the splash screen feature, so it keeps filling the framebuffer memory. A proper fix to this issue is to 1:1 linear map the framebuffer memory to IOVA space so the SMMU will have the same address as the physical address in its page table. Yet, Thierry has been working on the solution above for a year, and it hasn't merged. Therefore, let's partially revert the mentioned commit to fix the errors. The reason why we do a partial revert here is that we can still set priv in ->of_xlate() callback for PCI devices. Meanwhile, devices existing in DT, like display, will go through tegra_smmu_configure() at the stage of bus_set_iommu() when SMMU gets probed(), as what it did before we merged the mentioned commit. Once we have the linear map solution for framebuffer memory, this change can be cleaned away. [Big thank to Guillaume who reported and helped debugging/verification] Fixes: 25938c73cd79 ("iommu/tegra-smmu: Rework tegra_smmu_probe_device()") Reported-by: Guillaume Tucker <guillaume.tucker@collabora.com> Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com> Tested-by: Guillaume Tucker <guillaume.tucker@collabora.com> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20210218220702.1962-1-nicoleotsuka@gmail.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-03-04iommu/amd: Fix sleeping in atomic in increase_address_space()Andrey Ryabinin
increase_address_space() calls get_zeroed_page(gfp) under spin_lock with disabled interrupts. gfp flags passed to increase_address_space() may allow sleeping, so it comes to this: BUG: sleeping function called from invalid context at mm/page_alloc.c:4342 in_atomic(): 1, irqs_disabled(): 1, pid: 21555, name: epdcbbf1qnhbsd8 Call Trace: dump_stack+0x66/0x8b ___might_sleep+0xec/0x110 __alloc_pages_nodemask+0x104/0x300 get_zeroed_page+0x15/0x40 iommu_map_page+0xdd/0x3e0 amd_iommu_map+0x50/0x70 iommu_map+0x106/0x220 vfio_iommu_type1_ioctl+0x76e/0x950 [vfio_iommu_type1] do_vfs_ioctl+0xa3/0x6f0 ksys_ioctl+0x66/0x70 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x4e/0x100 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by moving get_zeroed_page() out of spin_lock/unlock section. Fixes: 754265bcab ("iommu/amd: Fix race in increase_address_space()") Signed-off-by: Andrey Ryabinin <arbn@yandex-team.com> Acked-by: Will Deacon <will@kernel.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210217143004.19165-1-arbn@yandex-team.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-03-04ALSA: usb-audio: Apply the control quirk to Plantronics headsetsTakashi Iwai
Other Plantronics headset models seem requiring the same workaround as C320-M to add the 20ms delay for the control messages, too. Apply the workaround generically for devices with the vendor ID 0x047f. Note that the problem didn't surface before 5.11 just with luck. Since 5.11 got a big code rewrite about the stream handling, the parameter setup procedure has changed, and this seemed triggering the problem more often. BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1182552 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210304085009.4770-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-03-04ALSA: usb-audio: Fix "cannot get freq eq" errors on Dell AE515 sound barTakashi Iwai
Dell AE515 sound bar (413c:a506) spews the error messages when the driver tries to read the current sample frequency, hence it needs to be on the list in snd_usb_get_sample_rate_quirk(). BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=211551 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210304083021.2152-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-03-04ALSA: hda: ignore invalid NHLT tableMark Pearson
On some Lenovo systems if the microphone is disabled in the BIOS only the NHLT table header is created, with no data. This means the endpoints field is not correctly set to zero - leading to an unintialised variable and hence invalid descriptors are parsed leading to page faults. The Lenovo firmware team is addressing this, but adding a check preventing invalid tables being parsed is worthwhile. Tested on a Lenovo T14. Tested-by: Philipp Leskovitz <philipp.leskovitz@secunet.com> Reported-by: Philipp Leskovitz <philipp.leskovitz@secunet.com> Signed-off-by: Mark Pearson <markpearson@lenovo.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210302141003.7342-1-markpearson@lenovo.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-03-04arch/parisc/kernel: remove duplicate include in ptraceZhang Yunkai
'linux/compat.h' included in 'arch/parisc/kernel/ptrace.c' is duplicated. It is also included in the 24th line. Signed-off-by: Zhang Yunkai <zhang.yunkai@zte.com.cn> Signed-off-by: Helge Deller <deller@gmx.de>
2021-03-04ALSA: usb-audio: Disable USB autosuspend properly in setup_disable_autosuspend()Kai-Heng Feng
Rear audio on Lenovo ThinkStation P620 stops working after commit 1965c4364bdd ("ALSA: usb-audio: Disable autosuspend for Lenovo ThinkStation P620"): [ 6.013526] usbcore: registered new interface driver snd-usb-audio [ 6.023064] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1 [ 6.023083] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4 [ 6.023090] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1 [ 6.023098] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4 [ 6.023103] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1 [ 6.023110] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4 [ 6.045846] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1 [ 6.045866] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4 [ 6.045877] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1 [ 6.045886] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4 [ 6.045894] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1 [ 6.045908] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4 I overlooked the issue because when I was working on the said commit, only the front audio is tested. Apology for that. Changing supports_autosuspend in driver is too late for disabling autosuspend, because it was already used by USB probe routine, so it can break the balance on the following code that depends on supports_autosuspend. Fix it by using usb_disable_autosuspend() helper, and balance the suspend count in disconnect callback. Fixes: 1965c4364bdd ("ALSA: usb-audio: Disable autosuspend for Lenovo ThinkStation P620") Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210304043419.287191-1-kai.heng.feng@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-03-03drm/amdgpu: fix parameter error of RREG32_PCIE() in amdgpu_regs_pcieKevin Wang
the register offset isn't needed division by 4 to pass RREG32_PCIE() Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-03-03drm/amd/display: fix the return of the uninitialized value in retColin Ian King
Currently if stream->signal is neither SIGNAL_TYPE_DISPLAY_PORT_MST or SIGNAL_TYPE_DISPLAY_PORT then variable ret is uninitialized and this is checked for > 0 at the end of the function. Ret should be initialized, I believe setting it to zero is a correct default. Addresses-Coverity: ("Uninitialized scalar variable") Fixes: bd0c064c161c ("drm/amd/display: Add return code instead of boolean for future use") Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-03drm/amdgpu: enable BACO runpm by default on sienna cichlid and navy flounderAlex Deucher
It works fine and was only disabled because primary GPUs don't enter runpm if there is a console bound to the fbdev due to the kmap. This will at least allow runpm on secondary cards. Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-03drm/amd/pm: correct Arcturus mmTHM_BACO_CNTL register addressEvan Quan
Arcturus has a different register address from other SMU V11 ASICs. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-03-03drm/amdgpu/swsmu/vangogh: Only use RLCPowerNotify msg for disableAlex Deucher
Per discussions with PMFW team, the driver only needs to notify the PMFW when the RLC is disabled. The RLC FW will notify the PMFW directly when it's enabled. Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-03drm/amdgpu/pm: make unsupported power profile messages debugAlex Deucher
Making them an error confuses users and the errors are harmless as not all asics support all profiles. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1488 Acked-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-03drm/amdgpu:disable VCN for Navi12 SKUAsher.Song
Navi12 0x7360/C7 SKU has no video support, so remove it. Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Asher.Song <Asher.Song@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-03-03drm/amdgpu: Only check for S0ix if AMD_PMC is configuredAlex Deucher
The S0ix check only makes sense if the AMD PMC driver is present. We need to use the legacy S3 pathes when the PMC driver is not present. Reviewed-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-03-04netfilter: nftables: bogus check for netlink portID with table ownerPablo Neira Ayuso
The existing branch checks for 0 != table->nlpid which always evaluates true for tables that have an owner. Fixes: 6001a930ce03 ("netfilter: nftables: introduce table ownership") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-03-04netfilter: nftables: fix possible double hook unregistration with table ownerPablo Neira Ayuso
Skip hook unregistration of owner tables from the netns exit path, nft_rcv_nl_event() unregisters the table hooks before tearing down the table content. Fixes: 6001a930ce03 ("netfilter: nftables: introduce table ownership") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-03-03rtnetlink: using dev_base_seq from target netzhang kai
Signed-off-by: zhang kai <zhangkaiheb@126.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-03net: 9p: advance iov on empty readJisheng Zhang
I met below warning when cating a small size(about 80bytes) txt file on 9pfs(msize=2097152 is passed to 9p mount option), the reason is we miss iov_iter_advance() if the read count is 0 for zerocopy case, so we didn't truncate the pipe, then iov_iter_pipe() thinks the pipe is full. Fix it by removing the exception for 0 to ensure to call iov_iter_advance() even on empty read for zerocopy case. [ 8.279568] WARNING: CPU: 0 PID: 39 at lib/iov_iter.c:1203 iov_iter_pipe+0x31/0x40 [ 8.280028] Modules linked in: [ 8.280561] CPU: 0 PID: 39 Comm: cat Not tainted 5.11.0+ #6 [ 8.281260] RIP: 0010:iov_iter_pipe+0x31/0x40 [ 8.281974] Code: 2b 42 54 39 42 5c 76 22 c7 07 20 00 00 00 48 89 57 18 8b 42 50 48 c7 47 08 b [ 8.283169] RSP: 0018:ffff888000cbbd80 EFLAGS: 00000246 [ 8.283512] RAX: 0000000000000010 RBX: ffff888000117d00 RCX: 0000000000000000 [ 8.283876] RDX: ffff88800031d600 RSI: 0000000000000000 RDI: ffff888000cbbd90 [ 8.284244] RBP: ffff888000cbbe38 R08: 0000000000000000 R09: ffff8880008d2058 [ 8.284605] R10: 0000000000000002 R11: ffff888000375510 R12: 0000000000000050 [ 8.284964] R13: ffff888000cbbe80 R14: 0000000000000050 R15: ffff88800031d600 [ 8.285439] FS: 00007f24fd8af600(0000) GS:ffff88803ec00000(0000) knlGS:0000000000000000 [ 8.285844] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8.286150] CR2: 00007f24fd7d7b90 CR3: 0000000000c97000 CR4: 00000000000406b0 [ 8.286710] Call Trace: [ 8.288279] generic_file_splice_read+0x31/0x1a0 [ 8.289273] ? do_splice_to+0x2f/0x90 [ 8.289511] splice_direct_to_actor+0xcc/0x220 [ 8.289788] ? pipe_to_sendpage+0xa0/0xa0 [ 8.290052] do_splice_direct+0x8b/0xd0 [ 8.290314] do_sendfile+0x1ad/0x470 [ 8.290576] do_syscall_64+0x2d/0x40 [ 8.290818] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 8.291409] RIP: 0033:0x7f24fd7dca0a [ 8.292511] Code: c3 0f 1f 80 00 00 00 00 4c 89 d2 4c 89 c6 e9 bd fd ff ff 0f 1f 44 00 00 31 8 [ 8.293360] RSP: 002b:00007ffc20932818 EFLAGS: 00000206 ORIG_RAX: 0000000000000028 [ 8.293800] RAX: ffffffffffffffda RBX: 0000000001000000 RCX: 00007f24fd7dca0a [ 8.294153] RDX: 0000000000000000 RSI: 0000000000000003 RDI: 0000000000000001 [ 8.294504] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000 [ 8.294867] R10: 0000000001000000 R11: 0000000000000206 R12: 0000000000000003 [ 8.295217] R13: 0000000000000001 R14: 0000000000000001 R15: 0000000000000000 [ 8.295782] ---[ end trace 63317af81b3ca24b ]--- Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-03Revert "r8152: adjust the settings about MAC clock speed down for RTL8153"Hayes Wang
This reverts commit 134f98bcf1b898fb9d6f2b91bc85dd2e5478b4b8. The r8153_mac_clk_spd() is used for RTL8153A only, because the register table of RTL8153B is different from RTL8153A. However, this function would be called when RTL8153B calls r8153_first_init() and r8153_enter_oob(). That causes RTL8153B becomes unstable when suspending and resuming. The worst case may let the device stop working. Besides, revert this commit to disable MAC clock speed down for RTL8153A. It would avoid the known issue when enabling U1. The data of the first control transfer may be wrong when exiting U1. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-03net: l2tp: reduce log level of messages in receive path, add counter insteadMatthias Schiffer
Commit 5ee759cda51b ("l2tp: use standard API for warning log messages") changed a number of warnings about invalid packets in the receive path so that they are always shown, instead of only when a special L2TP debug flag is set. Even with rate limiting these warnings can easily cause significant log spam - potentially triggered by a malicious party sending invalid packets on purpose. In addition these warnings were noticed by projects like Tunneldigger [1], which uses L2TP for its data path, but implements its own control protocol (which is sufficiently different from L2TP data packets that it would always be passed up to userspace even with future extensions of L2TP). Some of the warnings were already redundant, as l2tp_stats has a counter for these packets. This commit adds one additional counter for invalid packets that are passed up to userspace. Packets with unknown session are not counted as invalid, as there is nothing wrong with the format of these packets. With the additional counter, all of these messages are either redundant or benign, so we reduce them to pr_debug_ratelimited(). [1] https://github.com/wlanslovenija/tunneldigger/issues/160 Fixes: 5ee759cda51b ("l2tp: use standard API for warning log messages") Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-03net: macb: Add default usrio config to default gem configAtish Patra
There is no usrio config defined for default gem config leading to a kernel panic devices that don't define a data. This issue can be reprdouced with microchip polar fire soc where compatible string is defined as "cdns,macb". Fixes: edac63861db7 ("add userio bits as platform configuration") Signed-off-by: Atish Patra <atish.patra@wdc.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-03Merge tag 'wireless-drivers-2021-03-03' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.12 Second set of fixes for v5.12. Only three iwlwifi fixes this time, the crash with MVM being the most important one and reported by multiple people. iwlwifi * fix kernel crash regression when using LTO with MVM devices * fix printk format warnings * fix potential deadlock found by lockdep ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-03ALSA: usb: Add Plantronics C320-M USB ctrl msg delay quirkJohn Ernberg
The microphone in the Plantronics C320-M headset will randomly fail to initialize properly, at least when using Microsoft Teams. Introducing a 20ms delay on the control messages appears to resolve the issue. Link: https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/issues/1065 Tested-by: Andreas Kempe <kempe@lysator.liu.se> Signed-off-by: John Ernberg <john.ernberg@actia.se> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210303181405.39835-1-john.ernberg@actia.se Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-03-03ACPI: bus: Constify is_acpi_node() and friends (part 2)Andy Shevchenko
Commit 8b9d6802583a ("ACPI: Constify acpi_bus helper functions, switch to macros") only changed functions for CONFIG_ACPI=y case. This part adjusts the rest. Fixes: 8b9d6802583a ("ACPI: Constify acpi_bus helper functions, switch to macros") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-03-03RDMA/uverbs: Fix kernel-doc warning of _uverbs_allocLeon Romanovsky
Fix the following W=1 compilation warning: drivers/infiniband/core/uverbs_ioctl.c:108: warning: expecting prototype for uverbs_alloc(). Prototype was for _uverbs_alloc() instead Fixes: 461bb2eee4e1 ("IB/uverbs: Add a simple allocator to uverbs_attr_bundle") Link: https://lore.kernel.org/r/20210302074214.1054299-3-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-03-03RDMA/mlx5: Set correct kernel-doc identifierLeon Romanovsky
The W=1 allmodconfig build produces the following warning: drivers/infiniband/hw/mlx5/odp.c:1086: warning: wrong kernel-doc identifier on line: * Parse a series of data segments for page fault handling. Fix it by changing /** to be /* as it is written in kernel-doc documentation. Fixes: 5e769e444d26 ("RDMA/hw/mlx5/odp: Fix formatting and add missing descriptions in 'pagefault_data_segments()'") Link: https://lore.kernel.org/r/20210302074214.1054299-2-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-03-03docs: networking: drop special stable handlingJakub Kicinski
Leave it to Greg. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-03net: stmmac: fix incorrect DMA channel intr enable setting of EQoS v4.10Ong Boon Leong
We introduce dwmac410_dma_init_channel() here for both EQoS v4.10 and above which use different DMA_CH(n)_Interrupt_Enable bit definitions for NIE and AIE. Fixes: 48863ce5940f ("stmmac: add DMA support for GMAC 4.xx") Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Ramesh Babu B <ramesh.babu.b@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-03ibmvnic: Fix possibly uninitialized old_num_tx_queues variable warning.Michal Suchanek
GCC 7.5 reports: ../drivers/net/ethernet/ibm/ibmvnic.c: In function 'ibmvnic_reset_init': ../drivers/net/ethernet/ibm/ibmvnic.c:5373:51: warning: 'old_num_tx_queues' may be used uninitialized in this function [-Wmaybe-uninitialized] ../drivers/net/ethernet/ibm/ibmvnic.c:5373:6: warning: 'old_num_rx_queues' may be used uninitialized in this function [-Wmaybe-uninitialized] The variable is initialized only if(reset) and used only if(reset && something) so this is a false positive. However, there is no reason to not initialize the variables unconditionally avoiding the warning. Fixes: 635e442f4a48 ("ibmvnic: merge ibmvnic_reset_init and ibmvnic_init") Signed-off-by: Michal Suchanek <msuchanek@suse.de> Reviewed-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-03octeontx2-af: cn10k: fix an array overflow in is_lmac_valid()Dan Carpenter
The value of "lmac_id" can be controlled by the user and if it is larger then the number of bits in long then it reads outside the bitmap. The highest valid value is less than MAX_LMAC_PER_CGX (4). Fixes: 91c6945ea1f9 ("octeontx2-af: cn10k: Add RPM MAC support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-03iwlwifi: don't call netif_napi_add() with rxq->lock held (was Re: Lockdep ↵Jiri Kosina
warning in iwl_pcie_rx_handle()) We can't call netif_napi_add() with rxq-lock held, as there is a potential for deadlock as spotted by lockdep (see below). rxq->lock is not protecting anything over the netif_napi_add() codepath anyway, so let's drop it just before calling into NAPI. ======================================================== WARNING: possible irq lock inversion dependency detected 5.12.0-rc1-00002-gbada49429032 #5 Not tainted -------------------------------------------------------- irq/136-iwlwifi/565 just changed the state of lock: ffff89f28433b0b0 (&rxq->lock){+.-.}-{2:2}, at: iwl_pcie_rx_handle+0x7f/0x960 [iwlwifi] but this lock took another, SOFTIRQ-unsafe lock in the past: (napi_hash_lock){+.+.}-{2:2} and interrupts could create inverse lock ordering between them. other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(napi_hash_lock); local_irq_disable(); lock(&rxq->lock); lock(napi_hash_lock); <Interrupt> lock(&rxq->lock); *** DEADLOCK *** 1 lock held by irq/136-iwlwifi/565: #0: ffff89f2b1440170 (sync_cmd_lockdep_map){+.+.}-{0:0}, at: iwl_pcie_irq_handler+0x5/0xb30 the shortest dependencies between 2nd lock and 1st lock: -> (napi_hash_lock){+.+.}-{2:2} { HARDIRQ-ON-W at: lock_acquire+0x277/0x3d0 _raw_spin_lock+0x2c/0x40 netif_napi_add+0x14b/0x270 e1000_probe+0x2fe/0xee0 [e1000e] local_pci_probe+0x42/0x90 pci_device_probe+0x10b/0x1c0 really_probe+0xef/0x4b0 driver_probe_device+0xde/0x150 device_driver_attach+0x4f/0x60 __driver_attach+0x9c/0x140 bus_for_each_dev+0x79/0xc0 bus_add_driver+0x18d/0x220 driver_register+0x5b/0xf0 do_one_initcall+0x5b/0x300 do_init_module+0x5b/0x21c load_module+0x1dae/0x22c0 __do_sys_finit_module+0xad/0x110 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae SOFTIRQ-ON-W at: lock_acquire+0x277/0x3d0 _raw_spin_lock+0x2c/0x40 netif_napi_add+0x14b/0x270 e1000_probe+0x2fe/0xee0 [e1000e] local_pci_probe+0x42/0x90 pci_device_probe+0x10b/0x1c0 really_probe+0xef/0x4b0 driver_probe_device+0xde/0x150 device_driver_attach+0x4f/0x60 __driver_attach+0x9c/0x140 bus_for_each_dev+0x79/0xc0 bus_add_driver+0x18d/0x220 driver_register+0x5b/0xf0 do_one_initcall+0x5b/0x300 do_init_module+0x5b/0x21c load_module+0x1dae/0x22c0 __do_sys_finit_module+0xad/0x110 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae INITIAL USE at: lock_acquire+0x277/0x3d0 _raw_spin_lock+0x2c/0x40 netif_napi_add+0x14b/0x270 e1000_probe+0x2fe/0xee0 [e1000e] local_pci_probe+0x42/0x90 pci_device_probe+0x10b/0x1c0 really_probe+0xef/0x4b0 driver_probe_device+0xde/0x150 device_driver_attach+0x4f/0x60 __driver_attach+0x9c/0x140 bus_for_each_dev+0x79/0xc0 bus_add_driver+0x18d/0x220 driver_register+0x5b/0xf0 do_one_initcall+0x5b/0x300 do_init_module+0x5b/0x21c load_module+0x1dae/0x22c0 __do_sys_finit_module+0xad/0x110 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae } ... key at: [<ffffffffae84ef38>] napi_hash_lock+0x18/0x40 ... acquired at: _raw_spin_lock+0x2c/0x40 netif_napi_add+0x14b/0x270 _iwl_pcie_rx_init+0x1f4/0x710 [iwlwifi] iwl_pcie_rx_init+0x1b/0x3b0 [iwlwifi] iwl_trans_pcie_start_fw+0x2ac/0x6a0 [iwlwifi] iwl_mvm_load_ucode_wait_alive+0x116/0x460 [iwlmvm] iwl_run_init_mvm_ucode+0xa4/0x3a0 [iwlmvm] iwl_op_mode_mvm_start+0x9ed/0xbf0 [iwlmvm] _iwl_op_mode_start.isra.4+0x42/0x80 [iwlwifi] iwl_opmode_register+0x71/0xe0 [iwlwifi] iwl_mvm_init+0x34/0x1000 [iwlmvm] do_one_initcall+0x5b/0x300 do_init_module+0x5b/0x21c load_module+0x1dae/0x22c0 __do_sys_finit_module+0xad/0x110 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae [ ... lockdep output trimmed .... ] Fixes: 25edc8f259c7106 ("iwlwifi: pcie: properly implement NAPI") Signed-off-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/nycvar.YFH.7.76.2103021134060.12405@cbobk.fhfr.pm
2021-03-03iwlwifi: fix ARCH=i386 compilation warningsPierre-Louis Bossart
An unsigned long variable should rely on '%lu' format strings, not '%zd' Fixes: a1a6a4cf49ece ("iwlwifi: pnvm: implement reading PNVM from UEFI") Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210302011640.1276636-1-pierre-louis.bossart@linux.intel.com
2021-03-03iwlwifi: mvm: add terminate entry for dmi_system_id tablesWei Yongjun
Make sure dmi_system_id tables are NULL terminated. This crashed when LTO was enabled: BUG: KASAN: global-out-of-bounds in dmi_check_system+0x5a/0x70 Read of size 1 at addr ffffffffc16af750 by task NetworkManager/1913 CPU: 4 PID: 1913 Comm: NetworkManager Not tainted 5.12.0-rc1+ #10057 Hardware name: LENOVO 20THCTO1WW/20THCTO1WW, BIOS N2VET27W (1.12 ) 12/21/2020 Call Trace: dump_stack+0x90/0xbe print_address_description.constprop.0+0x1d/0x140 ? dmi_check_system+0x5a/0x70 ? dmi_check_system+0x5a/0x70 kasan_report.cold+0x7b/0xd4 ? dmi_check_system+0x5a/0x70 __asan_load1+0x4d/0x50 dmi_check_system+0x5a/0x70 iwl_mvm_up+0x1360/0x1690 [iwlmvm] ? iwl_mvm_send_recovery_cmd+0x270/0x270 [iwlmvm] ? setup_object.isra.0+0x27/0xd0 ? kasan_poison+0x20/0x50 ? ___slab_alloc.constprop.0+0x483/0x5b0 ? mempool_kmalloc+0x17/0x20 ? ftrace_graph_ret_addr+0x2a/0xb0 ? kasan_poison+0x3c/0x50 ? cfg80211_iftype_allowed+0x2e/0x90 [cfg80211] ? __kasan_check_write+0x14/0x20 ? mutex_lock+0x86/0xe0 ? __mutex_lock_slowpath+0x20/0x20 __iwl_mvm_mac_start+0x49/0x290 [iwlmvm] iwl_mvm_mac_start+0x37/0x50 [iwlmvm] drv_start+0x73/0x1b0 [mac80211] ieee80211_do_open+0x53e/0xf10 [mac80211] ? ieee80211_check_concurrent_iface+0x266/0x2e0 [mac80211] ieee80211_open+0xb9/0x100 [mac80211] __dev_open+0x1b8/0x280 Fixes: a2ac0f48a07c ("iwlwifi: mvm: implement approved list for the PPAG feature") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Victor Michel <vic.michel.web@gmail.com> Acked-by: Luca Coelho <luciano.coelho@intel.com> [kvalo@codeaurora.org: improve commit log] Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210223140039.1708534-1-weiyongjun1@huawei.com
2021-03-03tpm: Remove unintentional dump_stack() callJarkko Sakkinen
Somewhere along the line, probably during a rebase, an unintentional dump_stack() got included. Revert this change. Reported-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Fixes: 90cba8d20f8b ("tpm/ppi: Constify static struct attribute_group") Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2021-03-03ALSA: hda/realtek: Apply dual codec quirks for MSI Godlike X570 boardTakashi Iwai
There is another MSI board (1462:cc34) that has dual Realtek codecs, and we need to apply the existing quirk for fixing the conflicts of Master control. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=211743 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210303142346.28182-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-03-03rsxx: Return -EFAULT if copy_to_user() failsDan Carpenter
The copy_to_user() function returns the number of bytes remaining but we want to return -EFAULT to the user if it can't complete the copy. The "st" variable only holds zero on success or negative error codes on failure so the type should be int. Fixes: 36f988e978f8 ("rsxx: Adding in debugfs entries.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-03-03ALSA: hda/realtek: Add quirk for Intel NUC 10Werner Sembach
This adds a new SND_PCI_QUIRK(...) and applies it to the Intel NUC 10 devices. This fixes the issue of the devices not having audio input and output on the headset jack because the kernel does not recognize when something is plugged in. The new quirk was inspired by the quirk for the Intel NUC 8 devices, but it turned out that the NUC 10 uses another pin. This information was acquired by black box testing likely pins. Co-developed-by: Eckhart Mohr <e.mohr@tuxedocomputers.com> Signed-off-by: Eckhart Mohr <e.mohr@tuxedocomputers.com> Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210302180414.23194-1-wse@tuxedocomputers.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-03-03xen: fix p2m size in dom0 for disabled memory hotplug caseJuergen Gross
Since commit 9e2369c06c8a18 ("xen: add helpers to allocate unpopulated memory") foreign mappings are using guest physical addresses allocated via ZONE_DEVICE functionality. This will result in problems for the case of no balloon memory hotplug being configured, as the p2m list will only cover the initial memory size of the domain. Any ZONE_DEVICE allocated address will be outside the p2m range and thus a mapping can't be established with that memory address. Fix that by extending the p2m size for that case. At the same time add a check for a to be created mapping to be within the p2m limits in order to detect errors early. While changing a comment, remove some 32-bit leftovers. This is XSA-369. Fixes: 9e2369c06c8a18 ("xen: add helpers to allocate unpopulated memory") Cc: <stable@vger.kernel.org> # 5.9 Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2021-03-03xen-netback: respect gnttab_map_refs()'s return valueJan Beulich
Commit 3194a1746e8a ("xen-netback: don't "handle" error by BUG()") dropped respective a BUG_ON() without noticing that with this the variable's value wouldn't be consumed anymore. With gnttab_set_map_op() setting all status fields to a non-zero value, in case of an error no slot should have a status of GNTST_okay (zero). This is part of XSA-367. Cc: <stable@vger.kernel.org> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/d933f495-619a-0086-5fb4-1ec3cf81a8fc@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-03-03Xen/gnttab: handle p2m update errors on a per-slot basisJan Beulich
Bailing immediately from set_foreign_p2m_mapping() upon a p2m updating error leaves the full batch in an ambiguous state as far as the caller is concerned. Instead flags respective slots as bad, unmapping what was mapped there right away. HYPERVISOR_grant_table_op()'s return value and the individual unmap slots' status fields get used only for a one-time - there's not much we can do in case of a failure. Note that there's no GNTST_enomem or alike, so GNTST_general_error gets used. The map ops' handle fields get overwritten just to be on the safe side. This is part of XSA-367. Cc: <stable@vger.kernel.org> Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/96cccf5d-e756-5f53-b91a-ea269bfb9be0@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-03-02Merge tag 'misc-5.12-2021-03-02' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull misc fixes from Jens Axboe: "Two misc fixes that don't belong in other branches: - Fix a regression with ia64 signals, introduced by the TIF_NOTIFY_SIGNAL change in 5.11. - Fix the current swapfile regression from this merge window" * tag 'misc-5.12-2021-03-02' of git://git.kernel.dk/linux-block: swap: fix swapfile read/write offset ia64: don't call handle_signal() unless there's actually a signal queued
2021-03-02swap: fix swapfile read/write offsetJens Axboe
We're not factoring in the start of the file for where to write and read the swapfile, which leads to very unfortunate side effects of writing where we should not be... Fixes: 48d15436fde6 ("mm: remove get_swap_bio") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-03-02ia64: don't call handle_signal() unless there's actually a signal queuedJens Axboe
Sergei and John both reported that ia64 failed to boot in 5.11, and it was related to signals. Turns out the ia64 signal handling is a bit odd, it doesn't check the return value of get_signal() for whether there's a signal to deliver or not. With the introduction of TIF_NOTIFY_SIGNAL, then task_work could trigger it. Fix it by only calling handle_signal() if we actually have a real signal to deliver. This brings it in line with all other archs, too. Fixes: b269c229b0e8 ("ia64: add support for TIF_NOTIFY_SIGNAL") Reported-by: Sergei Trofimovich <slyich@gmail.com> Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Tested-by: Sergei Trofimovich <slyich@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-03-02net: ethernet: mtk-star-emac: fix wrong unmap in RX handlingBiao Huang
mtk_star_dma_unmap_rx() should unmap the dma_addr of old skb rather than that of new skb. Assign new_dma_addr to desc_data.dma_addr after all handling of old skb ends to avoid unexpected receive side error. Fixes: f96e9641e92b ("net: ethernet: mtk-star-emac: fix error path in RX handling") Signed-off-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-02stmmac: intel: Fix mdio bus registration issue for TGL-H/ADL-SWong Vee Khee
On Intel platforms which consist of two Ethernet Controllers such as TGL-H and ADL-S, a unique MDIO bus id is required for MDIO bus to be successful registered: [ 13.076133] sysfs: cannot create duplicate filename '/class/mdio_bus/stmmac-1' [ 13.083404] CPU: 8 PID: 1898 Comm: systemd-udevd Tainted: G U 5.11.0-net-next #106 [ 13.092410] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-S ADP-S DRR4 CRB, BIOS ADLIFSI1.R00.1494.B00.2012031421 12/03/2020 [ 13.105709] Call Trace: [ 13.108176] dump_stack+0x64/0x7c [ 13.111553] sysfs_warn_dup+0x56/0x70 [ 13.115273] sysfs_do_create_link_sd.isra.2+0xbd/0xd0 [ 13.120371] device_add+0x4df/0x840 [ 13.123917] ? complete_all+0x2a/0x40 [ 13.127636] __mdiobus_register+0x98/0x310 [libphy] [ 13.132572] stmmac_mdio_register+0x1c5/0x3f0 [stmmac] [ 13.137771] ? stmmac_napi_add+0xa5/0xf0 [stmmac] [ 13.142493] stmmac_dvr_probe+0x806/0xee0 [stmmac] [ 13.147341] intel_eth_pci_probe+0x1cb/0x250 [dwmac_intel] [ 13.152884] pci_device_probe+0xd2/0x150 [ 13.156897] really_probe+0xf7/0x4d0 [ 13.160527] driver_probe_device+0x5d/0x140 [ 13.164761] device_driver_attach+0x4f/0x60 [ 13.168996] __driver_attach+0xa2/0x140 [ 13.172891] ? device_driver_attach+0x60/0x60 [ 13.177300] bus_for_each_dev+0x76/0xc0 [ 13.181188] bus_add_driver+0x189/0x230 [ 13.185083] ? 0xffffffffc0795000 [ 13.188446] driver_register+0x5b/0xf0 [ 13.192249] ? 0xffffffffc0795000 [ 13.195577] do_one_initcall+0x4d/0x210 [ 13.199467] ? kmem_cache_alloc_trace+0x2ff/0x490 [ 13.204228] do_init_module+0x5b/0x21c [ 13.208031] load_module+0x2a0c/0x2de0 [ 13.211838] ? __do_sys_finit_module+0xb1/0x110 [ 13.216420] __do_sys_finit_module+0xb1/0x110 [ 13.220825] do_syscall_64+0x33/0x40 [ 13.224451] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 13.229515] RIP: 0033:0x7fc2b1919ccd [ 13.233113] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 93 31 0c 00 f7 d8 64 89 01 48 [ 13.251912] RSP: 002b:00007ffcea2e5b98 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 13.259527] RAX: ffffffffffffffda RBX: 0000560558920f10 RCX: 00007fc2b1919ccd [ 13.266706] RDX: 0000000000000000 RSI: 00007fc2b1a881e3 RDI: 0000000000000012 [ 13.273887] RBP: 0000000000020000 R08: 0000000000000000 R09: 0000000000000000 [ 13.281036] R10: 0000000000000012 R11: 0000000000000246 R12: 00007fc2b1a881e3 [ 13.288183] R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffcea2e5d58 [ 13.295389] libphy: mii_bus stmmac-1 failed to register Fixes: 88af9bd4efbd ("stmmac: intel: Add ADL-S 1Gbps PCI IDs") Fixes: 8450e23f142f ("stmmac: intel: Add PCI IDs for TGL-H platform") Signed-off-by: Wong Vee Khee <vee.khee.wong@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-02ftrace: Have recordmcount use w8 to read relp->r_info in arm64_is_fake_mcountChen Jun
On little endian system, Use aarch64_be(gcc v7.3) downloaded from linaro.org to build image with CONFIG_CPU_BIG_ENDIAN = y, CONFIG_FTRACE = y, CONFIG_DYNAMIC_FTRACE = y. gcc will create symbols of _mcount but recordmcount can not create mcount_loc for *.o. aarch64_be-linux-gnu-objdump -r fs/namei.o | grep mcount 00000000000000d0 R_AARCH64_CALL26 _mcount ... 0000000000007190 R_AARCH64_CALL26 _mcount The reason is than funciton arm64_is_fake_mcount can not work correctly. A symbol of _mcount in *.o compiled with big endian compiler likes: 00 00 00 2d 00 00 01 1b w(rp->r_info) will return 0x2d instead of 0x011b. Because w() takes uint32_t as parameter, which truncates rp->r_info. Use w8() instead w() to read relp->r_info Link: https://lkml.kernel.org/r/20210222135840.56250-1-chenjun102@huawei.com Fixes: ea0eada45632 ("recordmcount: only record relocation of type R_AARCH64_CALL26 on arm64.") Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Chen Jun <chenjun102@huawei.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-03-02parisc: Enable -mlong-calls gcc option with CONFIG_COMPILE_TESTHelge Deller
The kernel test robot reported multiple linkage problems like this: hppa64-linux-ld: init/main.o(.init.text+0x56c): cannot reach printk init/main.o: in function `unknown_bootoption': (.init.text+0x56c): relocation truncated to fit: R_PARISC_PCREL22F against symbol `printk' defined in .text.unlikely section in kernel/printk/printk.o There are two ways to solve it: a) Enable the -mlong-call compiler option (CONFIG_MLONGCALLS), b) Add long branch stub support in 64-bit linker. While b) is the long-term solution, this patch works around the issue by automatically enabling the CONFIG_MLONGCALLS option when CONFIG_COMPILE_TEST is set, which indicates that a non-production kernel (e.g. 0-day kernel) is built. Signed-off-by: Helge Deller <deller@gmx.de> Reported-by: kernel test robot <lkp@intel.com> Fixes: 00e35f2b0e8a ("parisc: Enable -mlong-calls gcc option by default when !CONFIG_MODULES") Cc: stable@vger.kernel.org # v5.6+
2021-03-02pstore/ram: Rate-limit "uncorrectable error in header" messageDmitry Osipenko
There is a quite huge "uncorrectable error in header" flood in KMSG on a clean system boot since there is no pstore buffer saved in RAM. Let's silence the redundant noisy messages by rate-limiting the printk message. Now there are maximum 10 messages printed repeatedly instead of 35+. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210302095850.30894-1-digetx@gmail.com
generated by cgit (git 2.34.1) at 2025-09-13 15:03:50 +0000