| Age | Commit message (Collapse) | Author |
|---|
|
Aborts all requeued commands prior to killing the request_queue. For
commands that time out on a dying request queue, set the "Do Not Retry"
bit on the command status so the command cannot be requeued. Finanally, if
the driver is requested to abort a command it did not start, do nothing.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
This protects admin queue access on shutdown. When the controller is
disabled, the queue is frozen to prevent new entry, and unfrozen on
resume, and fixes cq_vector signedness to not suspend a queue twice.
Since unfreezing the queue makes it available for commands, it requires
the queue be initialized, so this moves this part after that.
Special handling is done when the device is unresponsive during
shutdown. This can be optimized to not require subsequent commands to
timeout, but saving that fix for later.
This patch also removes the kill signals in this path that were left-over
artifacts from the blk-mq conversion and no longer necessary.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
add -lrt to fix undefined reference to `clock_gettime'
error seen when the test is compiled using gcc 4.6.4.
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
|
|
Since there is no gendisk associated with the admin queue, the driver
needs to hold a reference to it until all open references to the
controller are closed.
This also combines queue cleanup with freeing the tag set since these
should not be separate.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Once the nvme callback is set for a request, the driver can start it
and make it available for timeout handling. For timed out commands on a
device that is not initialized, this fixes potential deadlocks that can
occur on startup and shutdown when a device is unresponsive since they
can now be cancelled.
Asynchronous requests do not have any expected timeout, so these are
using the new "REQ_NO_TIMEOUT" request flags.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Requests that haven't been started prior to a queue dying can be ended
in error without waiting for them to start and time out.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Added code comment to explain why this is done.
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Some types of requests may be started that are not gauranteed to ever
complete. This adds a request flag that a driver can use so mark the
request as such.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Adds a helper function a driver can use to abort requeued requests in
case any are pending when h/w queues are being removed.
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Kicking requeued requests will start h/w queues in a work_queue, which
may alter the driver's requested state to temporarily stop them. This
patch exports a method to cancel the q->requeue_work so a driver can be
assured stopped h/w queues won't be started up before it is ready.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Drivers can iterate over all allocated request tags, but their callback
needs a way to know if the driver started the request in the first place.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
When the queue is set to dying, wake up tasks that are waiting on frozen
queue so they realize it is dying and abandon their request.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Modified by me to add a code comment on the need for the wakeup.
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
When perf report on TUI shows callchain it checks first node has
siblings to determine whether it needs to print percentage value.
But it missed a case that first node is NULL. So sometimes it segfaults
like below:
$ perf top -g
perf: Segmentation fault
-------- backtrace --------
perf[0x4fcefb]
/usr/lib/libc.so.6(+0x33b20)[0x7f2a35839b20]
perf(rb_next+0x8)[0x47d3d8]
perf[0x4f6058]
perf[0x4f833b]
perf[0x4f8610]
perf[0x4f209e]
perf(ui_browser__run+0x3a)[0x4f2e6a]
perf[0x4f94ee]
perf(perf_evlist__tui_browse_hists+0x94)[0x4fbbf4]
perf[0x444d10]
/usr/lib/libpthread.so.0(+0x7314)[0x7f2a37070314]
/usr/lib/libc.so.6(clone+0x6d)[0x7f2a358ee5bd]
$ addr2line -e `which perf` 0x4f6058
/home/namhyung/project/linux/tools/perf/ui/browsers/hists.c:553
I don't know why the backtrace didn't print some symbols..
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Fixes: 4087d11cd945 ("perf hists browser: Print overhead percent value for first-level callchain")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1419401076-21700-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Markus reported that "perf top -g" can leak ~300MB per second on his
machine. This is partly because it missed to free callchains when hist
entries are deleted. Fix it.
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20141230053813.GD6081@sejong
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When perf report --children resorts output fields, it tries to put
caller above the callee. But this was only meaningful for a same thread
and doing this requires callchain enabled. So fix its check before
comparing the callchain depth.
This also changes the hist accumulation tests: In test 3, xmalloc in
bash thread should be above than other perf threads due to alphabetical
order of comm string. Also it's under page_fault in bash thread since
alphabetical order of dso name. The sys_perf_event_open in perf thread
is put on the last line since it's self overhead is 0.
In test 4, the sys_perf_event_open is put above other perf entries that
have same children overhead since its callchain depth is smaller.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1419309381-2593-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In case kasprintf() fails in xen_setup_timer() we assign name to the
static string "<timer kasprintf failed>". We, however, don't check
that fact before issuing kfree() in xen_teardown_timer(), kernel is
supposed to crash with 'kernel BUG at mm/slub.c:3341!'
Solve the issue by making name a fixed length string inside struct
xen_clock_event_device. 16 bytes should be enough.
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
|
|
If the non-RAM regions in the e820 memory map are larger than the size
of the initial balloon, a BUG was triggered as the frames are remaped
beyond the limit of the linear p2m. The frames are remapped into the
initial balloon area (xen_extra_mem) but not enough of this is
available.
Ensure enough extra memory regions are added for these remapped
frames.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
|
|
This accounting is just used to print a diagnostic message that isn't
very useful.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
|
|
With recent changes in p2m we now have legitimate cases when
p2m memory needs to be freed during early boot (i.e. before
slab is initialized).
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
|
|
The early ioremap support introduced by patch bf4b558eba92
("arm64: add early_ioremap support") failed to add a call to
early_ioremap_reset() at an appropriate time. Without this call,
invocations of early_ioremap etc. that are done too late will go
unnoticed and may cause corruption.
This is exactly what happened when the first user of this feature
was added in patch f84d02755f5a ("arm64: add EFI runtime services").
The early mapping of the EFI memory map is unmapped during an early
initcall, at which time the early ioremap support is long gone.
Fix by adding the missing call to early_ioremap_reset() to
setup_arch(), and move the offending early_memunmap() to right after
the point where the early mapping of the EFI memory map is last used.
Fixes: f84d02755f5a ("arm64: add EFI runtime services")
Cc: <stable@vger.kernel.org>
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
pmd_to_page() is only available if USE_SPLIT_PMD_PTLOCKS is defined.
The use of pmd_to_page in the gmap code can cause compile errors if
NR_CPUS is smaller than SPLIT_PTLOCK_CPUS. Do not use pmd_to_page
outside of USE_SPLIT_PMD_PTLOCKS sections.
Reported-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
"
- 'perf probe' should fall back to find probe point in symbols when failing
to do so in a debuginfo file (Masami Hiramatsu)
- Fix 'perf probe' crash in dwarf_getcfi_elf (Namhyung Kim)
- Fix shell completion with 'perf list' --raw-dump option (Taesoo Kim)
- Fix 'perf diff' to sort by baseline field by default (Namhyung Kim)
"
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://people.freedesktop.org/~gabbayo/linux into drm-fixes
- Complete overhaul to the main IOCTL function, kfd_ioctl(), according to
drm_ioctl() example. This includes changing the IOCTL definitions, so it
breaks compatibility with previous versions of the userspace. However,
because the kernel was not officialy released yet, and this the first
kernel that includes amdkfd, I assume I can still do that at this stage.
- A couple of bug fixes for the non-HWS path (used for bring-ups and
debugging purposes only).
* tag 'amdkfd-fixes-2015-01-06' of git://people.freedesktop.org/~gabbayo/linux:
drm/amdkfd: rewrite kfd_ioctl() according to drm_ioctl()
drm/amdkfd: reformat IOCTL definitions to drm-style
drm/amdkfd: Do copy_to/from_user in general kfd_ioctl()
drm/amdkfd: unmap VMID<-->PASID when relesing VMID (non-HWS)
drm/radeon: Assign VMID to PASID for IH in non-HWS mode
drm/radeon: do not leave queue acquired if timeout happens in kgd_hqd_destroy()
drm/amdkfd: Load mqd to hqd in non-HWS mode
drm/amd: Fixing typos in kfd<->kgd interface
|
|
into drm-fixes
some minor radeon fixes.
* 'drm-fixes-3.19' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: integer underflow in radeon_cp_dispatch_texture()
drm/radeon: adjust default bapm settings for KV
drm/radeon: properly filter DP1.2 4k modes on non-DP1.2 hw
drm/radeon: fix sad_count check for dce3
drm/radeon: KV has three PPLLs (v2)
|
|
git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes
- Fix BUG() on !SMP builds
- Fix for OOPS on pre-NV50 that snuck into -next
- MCP7[789A] hang fix where firmware hasn't already setup NISO pollers
- NV4x IGP MSI disable, it doesn't appear to work correctly
- Add GK208B to recognised boards (no code change aside from adding
chipset recognition)
* 'linux-3.19' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
drm/nouveau/nouveau: Do not BUG_ON(!spin_is_locked()) on UP
drm/nv4c/mc: disable msi
drm/nouveau/fb/ram/mcp77: enable NISO poller
drm/nouveau/fb/ram/mcp77: use carveout reg to determine size
drm/nouveau/fb/ram/mcp77: subclass nouveau_ram
drm/nouveau: wake up the card if necessary during gem callbacks
drm/nouveau/device: Add support for GK208B, resolves bug 86935
drm/nouveau: fix missing return statement in nouveau_ttm_tt_unpopulate
drm/nouveau/bios: fix oops on pre-nv50 chipsets
|
|
The sh73a0 INTC can't mask interrupts properly most likely due to a
hardware bug. Set the .control_parent flag to delegate masking to the
parent interrupt controller, like was already done for irqpin1.
Without this, accessing the three-axis digital accelerometer ADXL345
on kzm9g through /dev/input/event1 causes an interrupt storm, which
requires a power-cycle to recover from.
This was inspired by a patch for arch/arm/boot/dts/sh73a0.dtsi from
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fixes: 341eb5465f67437a ("ARM: shmobile: INTC External IRQ pin driver on sh73a0")
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
Now local variables kernel_x_start and kernel_x_end defined using
'unsigned long' type which is wrong because they represent physical
memory range and will be calculated wrongly if LPAE is enabled.
As result, all following code in map_lowmem() will not work correctly.
For example, Keystone 2 boot is broken because
kernel_x_start == 0x0000 0000
kernel_x_end == 0x0080 0000
instead of
kernel_x_start == 0x0000 0008 0000 0000
kernel_x_end == 0x0000 0008 0080 0000
and as result whole low memory will be mapped with MT_MEMORY_RW
permissions by code (start > kernel_x_end):
} else if (start >= kernel_x_end) {
map.pfn = __phys_to_pfn(start);
map.virtual = __phys_to_virt(start);
map.length = end - start;
map.type = MT_MEMORY_RW;
create_mapping(&map);
}
Hence, fix it by using phys_addr_t type for variables kernel_x_start
and kernel_x_end.
Tested-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Currently the arm page table dumping code starts dumping page tables
from USER_PGTABLES_CEILING. This is unnecessary for skipping any entries
related to userspace as the swapper_pg_dir does not contain such
entries, and results in a couple of unfortuante side effects.
Firstly, any kernel mappings which might exist below
USER_PGTABLES_CEILING will not be accounted in the dump output. This
masks any entries erroneously created below this address.
Secondly, if the final page table entry walked is part of a valid
mapping the page table dumping code will not log the region this entry
is part of, as the final note_page call in walk_pgd will trigger an
early return when 0 < USER_PGTABLES_CEILING. Luckily this isn't seen on
contemporary systems as they typically don't have enough RAM to extend
the linear mapping right to the end of the address space.
Due to the way addr is constructed in the walk_* functions, it can never
be less than USER_PGTABLES_CEILING when walking the page tables, so it
is not necessary to avoid dereferencing invalid table addresses. The
existing checks for st->current_prot and st->marker[1].start_address are
sufficient to ensure we will not print and/or dereference garbage when
trying to log information.
This patch removes both problematic uses of USER_PGTABLES_CEILING from
the arm page table dumping code, preventing both of these issues. We
will now report any low mappings, and the final note_page call will not
return early, ensuring all regions are logged.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
A struct xdr_stream at a page boundary might point to the end of one
page or the beginning of the next, but xdr_truncate_encode isn't
prepared to handle the former.
This can cause corruption of NFSv4 READDIR replies in the case that a
readdir entry that would have exceeded the client's dircount/maxcount
limit would have ended exactly on a 4k page boundary. You're more
likely to hit this case on large directories.
Other xdr_truncate_encode callers are probably also affected.
Reported-by: Holger Hoffstätte <holger.hoffstaette@googlemail.com>
Tested-by: Holger Hoffstätte <holger.hoffstaette@googlemail.com>
Fixes: 3e19ce762b53 "rpc: xdr_truncate_encode"
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Currently, nfs4_set_delegation takes a reference to an existing
delegation and then checks to see if there is a conflict. If there is
one, then it doesn't release that reference.
Change the code to take the reference after the check and only if there
is no conflict.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
We store it in the tag set, we don't need it in the hardware queue.
While removing cmd_size, place ->queue_num further down to avoid
a hole on 64-bit archs. It's not used in any fast paths, so we
can safely move it.
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Current vfio-pci just supports normal pci device, so vfio_pci_probe() will
return if the pci device is not a normal device. While current code makes a
mistake. PCI_HEADER_TYPE is the offset in configuration space of the device
type, but we use this value to mask the type value.
This patch fixs this by do the check directly on the pci_dev->hdr_type.
Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Cc: stable@vger.kernel.org # v3.6+
|
|
Include rcupdate.h header to provide call_rcu() definition. This was implicitly
being provided by slab.h file which include srcu.h somewhere in its include
hierarchy which in-turn included rcupdate.h.
Lately, tinification effort added support to remove srcu entirely because of
which we are encountering build errors like
lib/assoc_array.c: In function 'assoc_array_apply_edit':
lib/assoc_array.c:1426:2: error: implicit declaration of function 'call_rcu' [-Werror=implicit-function-declaration]
cc1: some warnings being treated as errors
Fix these by including rcupdate.h explicitly.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Reported-by: Scott Wood <scottwood@freescale.com>
|
|
Although the 't->length' is a big-endian value, it's used without any
conversion. This means that the driver always uses 'length' parameter.
Fixes: 555e8a8f7f14("ALSA: fireworks: Add command/response functionality into hwdep interface")
Reported-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The gpio4 and gpio5 are in 0xf7fc0000 apb which is located in the SM domain.
This patch moves gpio4 and gpio5 to the correct location. This patch also
renames them as the following to match the names we internally used in
marvell:
gpio4 -> sm_gpio1
gpio5 -> sm_gpio0
porte -> portf
portf -> porte
This also matches what we did for BG2 and BG2CD's SM GPIO.
Cc: stable@vger.kernel.org # 3.16+
Fixes: cedf57fc4f2f ("ARM: dts: berlin: add the BG2Q GPIO nodes")
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
|
|
There's no card detection for the eMMC, so this patch adds the missing
broken-cd property. This patch also sets bus width as 8 to add
MMC_CAP_8_BIT_DATA in the Host capabilities.
Cc: stable@vger.kernel.org # 3.16+
Fixes: 3047086dfd56 ("ARM: dts: berlin: enable SD card reader and eMMC for the BG2Q DMP")
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
|
|
On BG2Q, the sdhci2 host uses nfcecc for "io" clk and nfc for "core" clk.
The shdci2 can't work without this patch due to the "core" clk is gated.
Cc: stable@vger.kernel.org # 3.16+
Fixes: 0d859a6a9d14 ("ARM: dts: berlin: add the SDHCI nodes for the BG2Q")
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
|
|
Since the ctemp is used for rcar_thermal_write() in
rcar_thermal_update_temp(), the type of 'ctemp' should be "u32" instead
of "int". This patch also changes type of the helper variables 'old'
and 'new'.
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
|
|
On R-Mobile APE6, since it has 3 thermal zones, ENR register
has enable bits in bit 19-16, bit 11-8 and bit 3-0.
However, on R-Car gen2, since it has 1 thermal zone, ENR register has
enable bits in bit 3-0. (In other words, the write value should always
be 0 for bit 31-4 of ENR register.)
So, this patch fixes the ENR register value using I/O resource sets.
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
|
|
On next-20150105, defconfig compilation breaks with:
arch/arm64/kernel/smp_spin_table.c:80:2: error: implicit declaration of function ‘ioremap_cache’ [-Werror=implicit-function-declaration]
arch/arm64/kernel/smp_spin_table.c:92:2: error: implicit declaration of function ‘writeq_relaxed’ [-Werror=implicit-function-declaration]
arch/arm64/kernel/smp_spin_table.c:101:2: error: implicit declaration of function ‘iounmap’ [-Werror=implicit-function-declaration]
Fix by including asm/io.h, which contains definitions or prototypes
for these macros or functions.
This second version incorporates a comment from Mark Rutland
<mark.rutland@arm.com> to keep the includes in alphabetical order
by filename.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Paul Walmsley <pwalmsley@nvidia.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
On next-20150105, defconfig compilation breaks with:
arch/arm64/kernel/module.c:408:4: error: implicit declaration of function ‘apply_alternatives’ [-Werror=implicit-function-declaration]
Fix by including asm/alternative.h, where the apply_alternatives()
prototype is declared.
This second version incorporates a comment from Mark Rutland
<mark.rutland@arm.com> to keep the includes in alphabetical order
by filename.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Paul Walmsley <pwalmsley@nvidia.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
On next-20150105, defconfig compilation breaks with:
./arch/arm64/include/asm/arch_timer.h:112:2: error: implicit declaration of function ‘BUG’ [-Werror=implicit-function-declaration]
Fix by including linux/bug.h, where the BUG macro is defined.
This second version incorporates a comment from Mark Rutland
<mark.rutland@arm.com> to keep the includes in alphabetical order
by filename.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Paul Walmsley <pwalmsley@nvidia.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
On next-20150105, defconfig compilation breaks with:
./arch/arm64/include/asm/processor.h:47:32: error: ‘PHYS_MASK’ undeclared (first use in this function)
Fix by including asm/pgtable-hwdef.h, where PHYS_MASK is defined.
This second version incorporates a comment from Mark Rutland
<mark.rutland@arm.com> to keep the includes in alphabetical order
by filename.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Paul Walmsley <pwalmsley@nvidia.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
We don't currently check a number of registers exposed to AArch32 guests
(MVFR{0,1,2}_EL1 and ID_DFR0_EL1), despite the fact these describe
AArch32 feature support exposed to userspace and KVM guests similarly to
AArch64 registers which we do check. We do not expect these registers to
vary across a set of CPUs.
This patch adds said registers to the cpuinfo framework and sanity
checks. No sanity check failures have been observed on a current ARMv8
big.LITTLE platform (Juno).
Cc: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Suzuki K. Poulose <suzuki.poulose@arm.com>
Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
prepare_to_copy() was removed from all architectures supported at that
time in commit 55ccf3fe3f9a ("fork: move the real prepare_to_copy()
users to arch_dup_task_struct()"). Remove it from arm64 as well.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Commit 97b56be10352a70c (arm64: compat: Enable bpf syscall) made the
usual mistake of forgetting to update __NR_compat_syscalls. Due to this,
when el0_sync_compat calls el0_svc_naked, the test against sc_nr
(__NR_compat_syscalls) will fail, and we'll call ni_sys, returning
-ENOSYS to userspace.
This patch bumps __NR_compat_syscalls appropriately, enabling the use of
the bpf syscall from compat tasks.
Due to the reorganisation of unistd{,32}.h as part of commit
f3e5c847ec3d12b4 (arm64: Add __NR_* definitions for compat syscalls) it
is not currently possible to include both headers and sanity-check the
value of __NR_compat_syscalls at build-time to prevent this from
happening again. Additional rework is required to make such niceties a
possibility.
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
commit 8b38694a2dc8b18374310df50174f1e4376d6824
vhost/net: virtio 1.0 byte swap
had this chunk:
- heads[headcount - 1].len += datalen;
+ heads[headcount - 1].len = cpu_to_vhost32(vq, len - datalen);
This adds datalen with the wrong sign, causing guest panics.
Fixes: 8b38694a2dc8b18374310df50174f1e4376d6824
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Suggested-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Currently disable_irq() doesn't work for pinctrl-st driver, due to
missing irq_disable hook in the driver.
disable_irq() is required only for level-triggered interrupts, which
is not the case normally.
Signed-off-by: Pankaj Dev <pankaj.dev@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Using the sysfs inteface to inspect the pins configuration
the system can walk around a path which acquires the same
mutex twice.
On STiH407 platform, for example :
cat /sys/kernel/debug/pinctrl/920f080.pin-controller-front0/pinconf-pins
hangs the kernel and never returns.
With this patch the mutex is temporary freed.
Signed-off-by: Francesco Virlinzi <francesco.virlinzi@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
dln2_gpio_direction_output() ignored the state passed into it. Fix it.
Also make dln2_gpio_pin_set_out_val return int, so we can check the error value.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Tested-by: Daniel Baluta <daniel.baluta@intel.com>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Octavian Purdila <octavian.purdila@intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
