| Age | Commit message (Collapse) | Author |
|---|
|
When new_curseg() is allocating a new segment, if mode=fragment:xxx is
switched on in large section scenario, __get_next_segno() will select
the next segno randomly in the range of [0, maxsegno] in order to
fragment segments.
If the candidate segno is free, get_new_segment() will use it directly
as the new segment.
However, if the section of the candidate is not empty, and some other
segments have already been used, and have a different type (e.g NODE)
with the candidate (e.g DATA), GC will complain inconsistent segment
type later.
This could be reproduced by the following steps:
dd if=/dev/zero of=test.img bs=1M count=10240
mkfs.f2fs -s 128 test.img
mount -t f2fs test.img /mnt -o mode=fragment:block
echo 1 > /sys/fs/f2fs/loop0/max_fragment_chunk
echo 512 > /sys/fs/f2fs/loop0/max_fragment_hole
dd if=/dev/zero of=/mnt/testfile bs=4K count=100
umount /mnt
F2FS-fs (loop0): Inconsistent segment (4377) type [0, 1] in SSA and SIT
In order to allow simulating segment fragmentation in large section
scenario, this patch reduces the candidate range:
* if curseg is the last segment in the section, return curseg->segno
to make get_new_segment() itself find the next free segment.
* if curseg is in the middle of the section, select candicate randomly
in the range of [curseg + 1, last_seg_in_the_same_section] to keep
type consistent.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Sheng Yong <shengyong@oppo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Commit 59c9081bc86e ("f2fs: allow write page cache when writting cp")
allows write() to write data to page cache during checkpoint, so block
count fields like .total_valid_block_count, .alloc_valid_block_count
and .rf_node_block_count may encounter race condition as below:
CP Thread A
- write_checkpoint
- block_operations
- f2fs_down_write(&sbi->node_change)
- __prepare_cp_block
: ckpt->valid_block_count = .total_valid_block_count
- f2fs_up_write(&sbi->node_change)
- write
- f2fs_preallocate_blocks
- f2fs_map_blocks(,F2FS_GET_BLOCK_PRE_AIO)
- f2fs_map_lock
- f2fs_down_read(&sbi->node_change)
- f2fs_reserve_new_blocks
- inc_valid_block_count
: percpu_counter_add(&sbi->alloc_valid_block_count, count)
: sbi->total_valid_block_count += count
- f2fs_up_read(&sbi->node_change)
- do_checkpoint
: sbi->last_valid_block_count = sbi->total_valid_block_count
: percpu_counter_set(&sbi->alloc_valid_block_count, 0)
: percpu_counter_set(&sbi->rf_node_block_count, 0)
- fsync
- need_do_checkpoint
- f2fs_space_for_roll_forward
: alloc_valid_block_count was reset to zero,
so, it may missed last data during checkpoint
Let's change to update .total_valid_block_count, .alloc_valid_block_count
and .rf_node_block_count in block_operations(), then their access can be
protected by .node_change and .cp_rwsem lock, so that it can avoid above
race condition.
Fixes: 59c9081bc86e ("f2fs: allow write page cache when writting cp")
Cc: Yunlei He <heyunlei@oppo.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
The lazytime/nolazytime options are now handled in the VFS, and are
never seen in filesystem parsers, so remove handling of these
options from f2fs.
Note: when lazytime support was added in 6d94c74ab85f it made
lazytime the default in default_options() - as a result, lazytime
cannot be disabled (because Opt_nolazytime is never seen in f2fs
parsing).
If lazytime is desired to be configurable, and default off is OK,
default_options() could be updated to stop setting it by default
and allow mount option control.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch fixes a potentially null pointer being accessed by
is_end_zone_blkaddr() that checks the last block of a zone
when f2fs is mounted as a single device.
Fixes: e067dc3c6b9c ("f2fs: maintain six open zones for zoned devices")
Signed-off-by: Daejun Park <daejun7.park@samsung.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Reviewed-by: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
The original function call passed size of smap->bucket before the number of
buckets which raises the error 'calloc-transposed-args' on compilation.
Vlastimil Babka added:
The order of parameters can be traced back all the way to 6ac99e8f23d4
("bpf: Introduce bpf sk local storage") accross several refactorings,
and that's why the commit is used as a Fixes: tag.
In v6.10-rc1, a different commit 2c321f3f70bc ("mm: change inlined
allocation helpers to account at the call site") however exposed the
order of args in a way that gcc-14 has enough visibility to start
warning about it, because (in !CONFIG_MEMCG case) bpf_map_kvcalloc is
then a macro alias for kvcalloc instead of a static inline wrapper.
To sum up the warning happens when the following conditions are all met:
- gcc-14 is used (didn't see it with gcc-13)
- commit 2c321f3f70bc is present
- CONFIG_MEMCG is not enabled in .config
- CONFIG_WERROR turns this from a compiler warning to error
Fixes: 6ac99e8f23d4 ("bpf: Introduce bpf sk local storage")
Reviewed-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Christian Kujau <lists@nerdbynature.de>
Signed-off-by: Mohammad Shehar Yaar Tausif <sheharyaar48@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://lore.kernel.org/r/20240710100521.15061-2-vbabka@suse.cz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Merge series from Guenter Roeck <linux@roeck-us.net>:
regmap_multi_reg_read() is similar to regmap_bilk_read() but reads from
an array of non-sequential registers. It is helpful if multiple non-
sequential registers need to be read in a single operation which would
otherwise have to be mutex protected.
The name of the new function was chosen to match the existing function
regmap_multi_reg_write().
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"21 hotfixes, 15 of which are cc:stable.
No identifiable theme here - all are singleton patches, 19 are for MM"
* tag 'mm-hotfixes-stable-2024-07-10-13-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (21 commits)
mm/hugetlb: fix kernel NULL pointer dereference when migrating hugetlb folio
mm/hugetlb: fix potential race in __update_and_free_hugetlb_folio()
filemap: replace pte_offset_map() with pte_offset_map_nolock()
arch/xtensa: always_inline get_current() and current_thread_info()
sched.h: always_inline alloc_tag_{save|restore} to fix modpost warnings
MAINTAINERS: mailmap: update Lorenzo Stoakes's email address
mm: fix crashes from deferred split racing folio migration
lib/build_OID_registry: avoid non-destructive substitution for Perl < 5.13.2 compat
mm: gup: stop abusing try_grab_folio
nilfs2: fix kernel bug on rename operation of broken directory
mm/hugetlb_vmemmap: fix race with speculative PFN walkers
cachestat: do not flush stats in recency check
mm/shmem: disable PMD-sized page cache if needed
mm/filemap: skip to create PMD-sized page cache if needed
mm/readahead: limit page cache size in page_cache_ra_order()
mm/filemap: make MAX_PAGECACHE_ORDER acceptable to xarray
mm/damon/core: merge regions aggressively when max_nr_regions is unmet
Fix userfaultfd_api to return EINVAL as expected
mm: vmalloc: check if a hash-index is in cpu_possible_mask
mm: prevent derefencing NULL ptr in pfn_section_valid()
...
|
|
The vmd driver creates a "domain" symlink in sysfs for each VMD bridge.
Previously this symlink was created after pci_bus_add_devices() added
devices below the VMD bridge and emitted udev events to announce them to
userspace.
This led to a race between userspace consumers of the udev events and the
kernel creation of the symlink. One such consumer is mdadm, which
assembles block devices into a RAID array, and for devices below a VMD
bridge, mdadm depends on the "domain" symlink.
If mdadm loses the race, it may be unable to assemble a RAID array, which
may cause a boot failure or other issues, with complaints like this:
(udev-worker)[2149]: nvme1n1: '/sbin/mdadm -I /dev/nvme1n1'(err) 'mdadm: Unable to get real path for '/sys/bus/pci/drivers/vmd/0000:c7:00.5/domain/device''
(udev-worker)[2149]: nvme1n1: '/sbin/mdadm -I /dev/nvme1n1'(err) 'mdadm: /dev/nvme1n1 is not attached to Intel(R) RAID controller.'
(udev-worker)[2149]: nvme1n1: '/sbin/mdadm -I /dev/nvme1n1'(err) 'mdadm: No OROM/EFI properties for /dev/nvme1n1'
(udev-worker)[2149]: nvme1n1: '/sbin/mdadm -I /dev/nvme1n1'(err) 'mdadm: no RAID superblock on /dev/nvme1n1.'
(udev-worker)[2149]: nvme1n1: Process '/sbin/mdadm -I /dev/nvme1n1' failed with exit code 1.
This symptom prevents the OS from booting successfully.
After a NVMe disk is probed/added by the nvme driver, udevd invokes mdadm
to detect if there is a mdraid associated with this NVMe disk, and mdadm
determines if a NVMe device is connected to a particular VMD domain by
checking the "domain" symlink. For example:
Thread A Thread B Thread mdadm
vmd_enable_domain
pci_bus_add_devices
__driver_probe_device
...
work_on_cpu
schedule_work_on
: wakeup Thread B
nvme_probe
: wakeup scan_work
to scan nvme disk
and add nvme disk
then wakeup udevd
: udevd executes
mdadm command
flush_work main
: wait for nvme_probe done ...
__driver_probe_device find_driver_devices
: probe next nvme device : 1) Detect domain symlink
... 2) Find domain symlink
... from vmd sysfs
... 3) Domain symlink not
... created yet; failed
sysfs_create_link
: create domain symlink
Create the VMD "domain" symlink before invoking pci_bus_add_devices() to
avoid this race.
Suggested-by: Adrian Huang <ahuang12@lenovo.com>
Link: https://lore.kernel.org/linux-pci/20240605124844.24293-1-sjiwei@163.com
Signed-off-by: Jiwei Sun <sunjw10@lenovo.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Nirmal Patel <nirmal.patel@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"One core change that moves a disk start message to a location where it
will only be printed once instead of twice plus a couple of error
handling race fixes in the ufs driver"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd: Do not repeat the starting disk message
scsi: ufs: core: Fix ufshcd_abort_one racing issue
scsi: ufs: core: Fix ufshcd_clear_cmd racing issue
|
|
Clang warns (or errors with CONFIG_WERROR=y):
drivers/clk/sophgo/clk-sg2042-pll.c:396:6: error: variable 'ret' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
396 | if (sg2042_pll_enable(pll, 0)) {
| ^~~~~~~~~~~~~~~~~~~~~~~~~
drivers/clk/sophgo/clk-sg2042-pll.c:418:9: note: uninitialized use occurs here
418 | return ret;
| ^~~
drivers/clk/sophgo/clk-sg2042-pll.c:396:2: note: remove the 'if' if its condition is always false
396 | if (sg2042_pll_enable(pll, 0)) {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
397 | pr_warn("Can't disable pll(%s), status error\n", pll->hw.init->name);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
398 | goto out;
| ~~~~~~~~~
399 | }
| ~
drivers/clk/sophgo/clk-sg2042-pll.c:393:9: note: initialize the variable 'ret' to silence this warning
393 | int ret;
| ^
| = 0
1 error generated.
sg2042_pll_enable() only ever returns zero, so this situation cannot
happen, but clang does not perform interprocedural analysis, so it
cannot know this to avoid the warning. Make it clearer to the compiler
by making sg2042_pll_enable() void and eliminate the error handling in
sg2042_clk_pll_set_rate(), which clears up the warning, as ret will
always be initialized.
Fixes: 48cf7e01386e ("clk: sophgo: Add SG2042 clock driver")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20240710-clk-sg2042-fix-sometimes-uninitialized-pll_set_rate-v1-1-538fa82dd539@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
In general it's a good idea to avoid using bare unreachable() because it
introduces undefined behavior in compiled code. but it caused a compilation warning,
Using BUG() instead of unreachable() to resolve compilation warnings.
Fixes the following warnings:
drivers/clk/sophgo/clk-cv18xx-ip.o: warning: objtool: mmux_round_rate() falls through to next function bypass_div_round_rate()
Fixes: 80fd61ec46124 ("clk: sophgo: Add clock support for CV1800 SoC")
Signed-off-by: Li Qiang <liqiang01@kylinos.cn>
Link: https://lore.kernel.org/r/c8e66d51f880127549e2a3e623be6787f62b310d.1720506143.git.liqiang01@kylinos.cn
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
We should allow RXDMA only if the reset was really successful, so clear
the flag after the reset call.
Fixes: 0e864b552b23 ("i2c: rcar: reset controller is mandatory for Gen3+")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
For CONFIG_DEBUG_OBJECTS_WORK=y kernels sscs.work defined by
INIT_WORK_ONSTACK() is initialized by debug_object_init_on_stack() for
the debug check in __init_work() to work correctly.
But this lacks the counterpart to remove the tracked object from debug
objects again, which will cause a debug object warning once the stack is
freed.
Add the missing destroy_work_on_stack() invocation to cure that.
[ tglx: Massaged changelog ]
Signed-off-by: Zqiang <qiang.zhang1211@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20240704065213.13559-1-qiang.zhang1211@gmail.com
|
|
The sbi_ecall() function arguments are not in the same order as the
ecall arguments, so we end up re-ordering the registers before the
ecall which is useless and costly.
So simply reorder the arguments in the same way as expected by ecall.
Instead of reordering directly the arguments of sbi_ecall(), use a proxy
macro since the current ordering is more natural.
Before:
Dump of assembler code for function sbi_ecall:
0xffffffff800085e0 <+0>: add sp,sp,-32
0xffffffff800085e2 <+2>: sd s0,24(sp)
0xffffffff800085e4 <+4>: mv t1,a0
0xffffffff800085e6 <+6>: add s0,sp,32
0xffffffff800085e8 <+8>: mv t3,a1
0xffffffff800085ea <+10>: mv a0,a2
0xffffffff800085ec <+12>: mv a1,a3
0xffffffff800085ee <+14>: mv a2,a4
0xffffffff800085f0 <+16>: mv a3,a5
0xffffffff800085f2 <+18>: mv a4,a6
0xffffffff800085f4 <+20>: mv a5,a7
0xffffffff800085f6 <+22>: mv a6,t3
0xffffffff800085f8 <+24>: mv a7,t1
0xffffffff800085fa <+26>: ecall
0xffffffff800085fe <+30>: ld s0,24(sp)
0xffffffff80008600 <+32>: add sp,sp,32
0xffffffff80008602 <+34>: ret
After:
Dump of assembler code for function __sbi_ecall:
0xffffffff8000b6b2 <+0>: add sp,sp,-32
0xffffffff8000b6b4 <+2>: sd s0,24(sp)
0xffffffff8000b6b6 <+4>: add s0,sp,32
0xffffffff8000b6b8 <+6>: ecall
0xffffffff8000b6bc <+10>: ld s0,24(sp)
0xffffffff8000b6be <+12>: add sp,sp,32
0xffffffff8000b6c0 <+14>: ret
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Yunhui Cui <cuiyunhui@bytedance.com>
Link: https://lore.kernel.org/r/20240322112629.68170-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
These are useful for measuring the latency of SBI calls. The SBI HSM
extension is excluded because those functions are called from contexts
such as cpuidle where instrumentation is not allowed.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240321230131.1838105-1-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
Allwinner SoC device tree changes for 6.11 part 2
One additional peripheral enabled for the H616.
- H616 crypto engine added
* tag 'sunxi-dt-for-6.11-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: h616: add crypto engine node
Link: https://lore.kernel.org/r/Zo7O73Afx7lZcBRi@wens.tw
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/drivers
Allwinner SoC driver changes for 6.11 part 2
One additional minor cleanup
- Const-ify |struct regmap_config| in SRAM driver
- Const-ify |struct regmap_bus| in Allwinner RSB bus driver
* tag 'sunxi-drivers-for-6.11-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
bus: sunxi-rsb: Constify struct regmap_bus
soc: sunxi: sram: Constify struct regmap_config
Link: https://lore.kernel.org/r/Zo7T4YsfamN0PbYK@wens.tw
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
As suggested by the B-ext spec, the Zbc (carry-less multiplication)
instructions can be used to accelerate CRC calculations. Currently, the
crc32 is the most widely used crc function inside kernel, so this patch
focuses on the optimization of just the crc32 APIs.
Compared with the current table-lookup based optimization, Zbc based
optimization can also achieve large stride during CRC calculation loop,
meantime, it avoids the memory access latency of the table-lookup based
implementation and it reduces memory footprint.
If Zbc feature is not supported in a runtime environment, then the
table-lookup based implementation would serve as fallback via alternative
mechanism.
By inspecting the vmlinux built by gcc v12.2.0 with default optimization
level (-O2), we can see below instruction count change for each 8-byte
stride in the CRC32 loop:
rv64: crc32_be (54->31), crc32_le (54->13), __crc32c_le (54->13)
rv32: crc32_be (50->32), crc32_le (50->16), __crc32c_le (50->16)
The compile target CPU is little endian, extra effort is needed for byte
swapping for the crc32_be API, thus, the instruction count change is not
as significant as that in the *_le cases.
This patch is tested on QEMU VM with the kernel CRC32 selftest for both
rv64 and rv32. Running the CRC32 selftest on a real hardware (SpacemiT K1)
with Zbc extension shows 65% and 125% performance improvement respectively
on crc32_test() and crc32c_test().
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240621054707.1847548-1-xiao.w.wang@intel.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
A gang submit won't work if the VMID is reserved and we can't flush out
VM changes from multiple engines at the same time.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 320debca1ba3a81c87247eac84eff976ead09ee0)
|
|
Use clamp() instead of duplicating its implementation.
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Link: https://lore.kernel.org/r/20240710143309.706135-2-thorsten.blum@toblux.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
`sun8i_r40_ccu_regmap_config` is not modified and can be declared as
const to move its data to a read-only section.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240703-clk-const-regmap-v1-9-7d15a0671d6f@gmail.com
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Geliang Tang says:
====================
v2:
- only check the first "link" (link_nl) in test_mixed_links().
- Drop patch 2 in v1.
This patchset fixes a segfault and a bpf object leak in test_progs.
It is a resend patch 1 out of "skip ENOTSUPP BPF selftests" set as Eduard
suggested. Together with another fix for xdp_adjust_tail.
====================
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
If bpf_object__load() fails in test_xdp_adjust_frags_tail_grow(), "obj"
opened before this should be closed. So use "goto out" to close it instead
of using "return" here.
Fixes: 110221081aac ("bpf: selftests: update xdp_adjust_tail selftest to include xdp frags")
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/f282a1ed2d0e3fb38cceefec8e81cabb69cab260.1720615848.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Run bpf_tcp_ca selftests (./test_progs -t bpf_tcp_ca) on a Loongarch
platform, some "Segmentation fault" errors occur:
'''
test_dctcp:PASS:bpf_dctcp__open_and_load 0 nsec
test_dctcp:FAIL:bpf_map__attach_struct_ops unexpected error: -524
#29/1 bpf_tcp_ca/dctcp:FAIL
test_cubic:PASS:bpf_cubic__open_and_load 0 nsec
test_cubic:FAIL:bpf_map__attach_struct_ops unexpected error: -524
#29/2 bpf_tcp_ca/cubic:FAIL
test_dctcp_fallback:PASS:dctcp_skel 0 nsec
test_dctcp_fallback:PASS:bpf_dctcp__load 0 nsec
test_dctcp_fallback:FAIL:dctcp link unexpected error: -524
#29/4 bpf_tcp_ca/dctcp_fallback:FAIL
test_write_sk_pacing:PASS:open_and_load 0 nsec
test_write_sk_pacing:FAIL:attach_struct_ops unexpected error: -524
#29/6 bpf_tcp_ca/write_sk_pacing:FAIL
test_update_ca:PASS:open 0 nsec
test_update_ca:FAIL:attach_struct_ops unexpected error: -524
settcpca:FAIL:setsockopt unexpected setsockopt: \
actual -1 == expected -1
(network_helpers.c:99: errno: No such file or directory) \
Failed to call post_socket_cb
start_test:FAIL:start_server_str unexpected start_server_str: \
actual -1 == expected -1
test_update_ca:FAIL:ca1_ca1_cnt unexpected ca1_ca1_cnt: \
actual 0 <= expected 0
#29/9 bpf_tcp_ca/update_ca:FAIL
#29 bpf_tcp_ca:FAIL
Caught signal #11!
Stack trace:
./test_progs(crash_handler+0x28)[0x5555567ed91c]
linux-vdso.so.1(__vdso_rt_sigreturn+0x0)[0x7ffffee408b0]
./test_progs(bpf_link__update_map+0x80)[0x555556824a78]
./test_progs(+0x94d68)[0x5555564c4d68]
./test_progs(test_bpf_tcp_ca+0xe8)[0x5555564c6a88]
./test_progs(+0x3bde54)[0x5555567ede54]
./test_progs(main+0x61c)[0x5555567efd54]
/usr/lib64/libc.so.6(+0x22208)[0x7ffff2aaa208]
/usr/lib64/libc.so.6(__libc_start_main+0xac)[0x7ffff2aaa30c]
./test_progs(_start+0x48)[0x55555646bca8]
Segmentation fault
'''
This is because BPF trampoline is not implemented on Loongarch yet,
"link" returned by bpf_map__attach_struct_ops() is NULL. test_progs
crashs when this NULL link passes to bpf_link__update_map(). This
patch adds NULL checks for all links in bpf_tcp_ca to fix these errors.
If "link" is NULL, goto the newly added label "out" to destroy the skel.
v2:
- use "goto out" instead of "return" as Eduard suggested.
Fixes: 06da9f3bd641 ("selftests/bpf: Test switching TCP Congestion Control algorithms.")
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/r/b4c841492bd4ed97964e4e61e92827ce51bf1dc9.1720615848.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
If CONFIG_ZSWAP is set to N, it means zswap cannot be enabled.
zswap_never_enabled() should return true.
The only effect of this issue is that with Barry's latest large folio
swapin patches for zram ("mm: support mTHP swap-in for zRAM-like
swapfile"), we will always fallback to order-0 swapin, even mistakenly
when !CONFIG_ZSWAP.
Basically this bug makes Barry's in progress patches not work at all.
The API was created to inform the mm core that zswap has never been
enabled, allowing the mm core to perform mTHP swap-in. This is a
transitional solution until zswap supports mTHP. If zswap has been
enabled, performing mTHP swap-in will result in corrupted data. You
may find the answer in the mTHP swap-in series:
https://lore.kernel.org/linux-mm/CAJD7tkZ4FQr6HZpduOdvmqgg_-whuZYE-Bz5O2t6yzw6Yg+v1A@mail.gmail.com/
Link: https://lkml.kernel.org/r/20240629232231.42394-1-21cnbao@gmail.com
Fixes: 0300e17d67c3 ("mm: zswap: add zswap_never_enabled()")
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Chris Li <chrisl@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The optimization of list_empty(&folio->_deferred_list) aimed to prevent
increasing the PTL duration when a large folio is partially unmapped, for
example, from subpage 0 to subpage (nr - 2).
But Ryan's commit 5ed890ce5147 ("mm: vmscan: avoid split during
shrink_folio_list()") actually splits this kind of large folios. This
makes the "optimization" useless.
Additionally, the list_empty() technically required a data_race()
annotation.
Link: https://lkml.kernel.org/r/20240629234155.53524-1-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The prefetchw() is introduced from an ancient patch[1].
The change log says:
The basic idea is to free higher order pages instead of going
through every single one. Also, some unnecessary atomic operations
are done away with and replaced with non-atomic equivalents, and
prefetching is done where it helps the most. For a more in-depth
discusion of this patch, please see the linux-ia64 archives (topic
is "free bootmem feedback patch").
So there are several changes improve the bootmem freeing, in which the
most basic idea is freeing higher order pages. And as Matthew says,
"Itanium CPUs of this era had no prefetchers."
I did 10 round bootup tests before and after this change, the data doesn't
prove prefetchw() help speeding up bootmem freeing. The sum of the 10
round bootmem freeing time after prefetchw() removal even 5.2% faster than
before.
[1]: https://lore.kernel.org/linux-ia64/40F46962.4090604@sgi.com/
Link: https://lkml.kernel.org/r/20240702020931.7061-1-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The functions set_max_threads() and task_struct_whitelist() are only used
by fork_init() during bootup.
Let's add __init tag to them.
Link: https://lkml.kernel.org/r/20240701013410.17260-2-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Since we plan to move the accounting into __free_pages_core(),
totalram_pages may not represent the total usable pages on system at this
point when defer_init is enabled.
Instead we can get the total usable pages from memblock directly.
Link: https://lkml.kernel.org/r/20240701013410.17260-1-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
CONFIG_MEMCG_KMEM used to be a user-visible option for whether slab
tracking is enabled. It has been default-enabled and equivalent to
CONFIG_MEMCG for almost a decade. We've only grown more kernel memory
accounting sites since, and there is no imaginable cgroup usecase going
forward that wants to track user pages but not the multitude of
user-drivable kernel allocations.
Link: https://lkml.kernel.org/r/20240701153148.452230-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Memcg v1-specific fields serve a buffer function between read-mostly and
update often parts of the mem_cgroup_per_node structure. If
CONFIG_MEMCG_V1 is not set and these fields are not present, an explicit
cacheline padding is needed.
Link: https://lkml.kernel.org/r/20240701185932.704807-2-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Suggested-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
After the grouping of the cgroup v1-related fields and the corresponding
reorganization of the struct mem_cgroup, the existing cache line padding
doesn't make much sense anymore. Let's drop it for now and put back to
new places, if necessary.
Link: https://lkml.kernel.org/r/20240701185932.704807-1-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Suggested-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Readers of DAMON subsystem documents index would want to further learn how
they can use DAMON from the user-space. Add the link to the admin guide.
Link: https://lkml.kernel.org/r/20240701192706.51415-10-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DAMON subsystem documents index page provides a short intro of DAMON core
concepts. Add links to sections of the design document to let users
easily browse to the details.
Link: https://lkml.kernel.org/r/20240701192706.51415-9-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Readers of the design document would wonder how they can configure and use
specific DAMON features. Add links to sections of DAMON sysfs interface
usage document that provides the answers for easier browsing.
Link: https://lkml.kernel.org/r/20240701192706.51415-8-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
'Modules' section
'Programmable Modules' section provides high level descriptions of the
DAMON API-based kernel modules layer. But 'Modules' section, which is at
the end of the document, provides every detail about the layer including
that of 'Programmable Modules' section.
Since the brief summary of the layers at the beginning of the document has
a link to the 'Modules' section, browsing to the section is not that
difficult. Remove 'Programmable Modules' section in favor of 'Modules'
section and reducing duplicates.
Link: https://lkml.kernel.org/r/20240701192706.51415-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
'Operations Set Layer' section
'Configurable Operations Set' section is for providing a description of
the pluggability of the operations set layer. Just after that,
'Operations Set Layer' section, which is dedicated for the entire things
of the layer, follows. The layout is odd, and some descriptions are
duplicated. Move 'Configurable Operations Set' section into 'Operations
Set Layer' and re-write some of the detailed descriptions.
Link: https://lkml.kernel.org/r/20240701192706.51415-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DAMON design document briefly explains the overall layers architecture
first, and then provides detailed explanations of each layer with
dedicated sections. Letting readers go directly to the detailed sections
for specific layers could help easy browsing of the not-very-short
document. Add links from the overall summary to the sections of details.
Link: https://lkml.kernel.org/r/20240701192706.51415-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DAMON user-space tool (damo) provides access pattern snapshot feature,
which is expected to be frequently used for real time access pattern
analysis. The snapshot output is also showing what DAMON provides on its
own, including the 'age' information.
In contrast, the recorded access patterns, which is shown as an example
usage on the quick start section, shows what users can make from what
DAMON provided. It includes information that generated outside of DAMON
and makes the 'age' concept bit unclear. Hence snapshot output is easier
at understanding the raw realtime output of DAMON. Add the snapshot usage
example on the quick start section.
Link: https://lkml.kernel.org/r/20240701192706.51415-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DAMON design document is not explaining how min_nr_regions limit is kept,
and what happens if the number of regions exceeds max_nr_regions. Add
more clarification for those.
Link: https://lkml.kernel.org/r/20240701192706.51415-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Docs/damon: minor fixups and improvements".
Fixup typos, clarify regions merging operation design with recent change,
add access pattern snapshot example use case, and improve readability of
the design document and subsystem documents index by
reorganizing/wordsmithing and adding links to other sections and/or
documents for easy browsing.
This patch (of 9):
Fix two typos. The first one is just a simple typo: s/accurach/accuracy/
The second one is made by the author being out of their mind. 'Region
Based Sampling' section of the doc is mistakenly calling the access
frequency counter of region as 'nr_regions'. Fix it with the correct
name, 'nr_accesses'.
Link: https://lkml.kernel.org/r/20240701192706.51415-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20240701192706.51415-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 19eaf44954df ("mm: thp: support allocation of anonymous multi-size
THP") added mTHP support for anonymous shmem. We can configure different
policies through the multi-size THP sysfs interface for anonymous shmem.
But when we configure the "advise" policy of
/sys/kernel/mm/transparent_hugepage/hugepages-xxxkB/shmem_enabled, we
cannot write the "advise", but write the "madvise", which is unreasonable.
We should keep the output and input values consistent, which is more
convenient for users.
Link: https://lkml.kernel.org/r/20240628032327.16987-1-libang.li@antgroup.com
Fixes: 61a57f1b1da9 ("mm: shmem: add multi-size THP sysfs interface for anonymous shmem")
Signed-off-by: Bang Li <libang.li@antgroup.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Bang Li <libang.li@antgroup.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Centralize the _GNU_SOURCE definition to CFLAGS in lib.mk. Remove
redundant defines from Makefiles that import lib.mk. Convert any usage of
"#define _GNU_SOURCE 1" to "#define _GNU_SOURCE".
This uses the form "-D_GNU_SOURCE=", which is equivalent to
"#define _GNU_SOURCE".
Otherwise using "-D_GNU_SOURCE" is equivalent to "-D_GNU_SOURCE=1" and
"#define _GNU_SOURCE 1", which is less commonly seen in source code and
would require many changes in selftests to avoid redefinition warnings.
Link: https://lkml.kernel.org/r/20240625223454.1586259-2-edliaw@google.com
Signed-off-by: Edward Liaw <edliaw@google.com>
Suggested-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: André Almeida <andrealmeid@igalia.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Kees Cook <kees@kernel.org>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Both Ryan and Chris have been utilizing the small test program to aid in
debugging and identifying issues with swap entry allocation. While a real
or intricate workload might be more suitable for assessing the correctness
and effectiveness of the swap allocation policy, a small test program
presents a simpler means of understanding the problem and initially
verifying the improvements being made.
Let's endeavor to integrate it into tools/mm. Although it presently only
accommodates 64KB and 4KB, I'm optimistic that we can expand its
capabilities to support multiple sizes and simulate more complex systems
in the future as required.
Basically, we have
1. Use MADV_PAGEPUT for rapid swap-out, putting the swap allocation
code under high exercise in a short time.
2. Use MADV_DONTNEED to simulate the behavior of libc and Java heap in
freeing memory, as well as for munmap, app exits, or OOM killer
scenarios. This ensures new mTHP is always generated, released or
swapped out, similar to the behavior on a PC or Android phone where
many applications are frequently started and terminated.
3. Swap in with or without the "-a" option to observe how fragments
due to swap-in and the incoming swap-in of large folios will impact
swap-out fallback.
Due to 2, we ensure a certain proportion of mTHP. Similarly, because of
3, we maintain a certain proportion of small folios, as we don't support
large folios swap-in, meaning any swap-in will immediately result in small
folios. Therefore, with both 2 and 3, we automatically achieve a system
containing both mTHP and small folios. Additionally, 1 provides the
ability to continuously swap them out.
We can also use "-s" to add a dedicated small folios memory area.
[akpm@linux-foundation.org: thp_swap_allocator_test.c needs mman.h, per Kairui Song]
Link: https://lkml.kernel.org/r/20240622071231.576056-2-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Acked-by: Chris Li <chrisl@kernel.org>
Tested-by: Chris Li <chrisl@kernel.org>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Tested-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kairui Song <kasong@tencent.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Pull VFIO fix from Alex Williamson:
- Recent stable backports are exposing a bug introduced in the v6.10
development cycle where a counter value is uninitialized. This leads
to regressions in userspace drivers like QEMU where where the kernel
might ask for an arbitrary buffer size or return out of memory itself
based on a bogus value. Zero initialize the counter. (Yi Liu)
* tag 'vfio-v6.10' of https://github.com/awilliam/linux-vfio:
vfio/pci: Init the count variable in collecting hot-reset devices
|
|
Geliang Tang says:
====================
v11:
- new patches 2, 4, 6.
- drop expect_errno from network_helper_opts as Eduard and Martin
suggested.
- drop sockmap_ktls patches from this set.
v10:
- a new patch 10 is added.
- patches 1-6, 8-9 unchanged, only commit logs updated.
- "err = -errno" is used in patches 7, 11, 12 to get the real error
number before checking value of "err".
v9:
- new patches 5-7, new struct member expect_errno for network_helper_opts.
- patches 1-4, 8-9 unchanged.
- update patches 10-11 to make sure all tests pass.
v8:
- only patch 8 updated, to fix errors reported by CI.
v7:
- address Martin's comments in v6. (thanks)
- use MAX(opts->backlog, 0) instead of opts->backlog.
- use connect_to_fd_opts instead connect_to_fd.
- more ASSERT_* to check errors.
v6:
- update patch 6 as Daniel suggested. (thanks)
v5:
- keep make_server and make_client as Eduard suggested.
v4:
- a new patch to use make_sockaddr in sockmap_ktls.
- a new patch to close fd in error path in drop_on_reuseport.
- drop make_server() in patch 7.
- drop make_client() too in patch 9.
v3:
- a new patch to add backlog for network_helper_opts.
- use start_server_str in sockmap_ktls now, not start_server.
v2:
- address Eduard's comments in v1. (thanks)
- fix errors reported by CI.
This patch set uses network helpers in sk_lookup, and drop the local
helpers inetaddr_len() and make_socket().
====================
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
This patch uses public helper connect_fd_to_fd() exported in
network_helpers.h instead of using getsockname() + connect() in
run_lookup_prog() in prog_tests/sk_lookup.c. This can simplify
the code.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/7077c277cde5a1864cdc244727162fb75c8bb9c5.1720515893.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
This patch uses public helper start_server_addr() in udp_recv_send()
in prog_tests/sk_lookup.c to simplify the code.
And use ASSERT_OK_FD() to check fd returned by start_server_addr().
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/f11cabfef4a2170ecb66a1e8e2e72116d8f621b3.1720515893.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
This patch uses public helper start_server_str() to simplify make_server()
in prog_tests/sk_lookup.c.
Add a callback setsockopts() to do all sockopts, set it to post_socket_cb
pointer of struct network_helper_opts. And add a new struct cb_opts to save
the data needed to pass to the callback. Then pass this network_helper_opts
to start_server_str().
Also use ASSERT_OK_FD() to check fd returned by start_server_str().
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/5981539f5591d2c4998c962ef2bf45f34c940548.1720515893.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
In the error path when update_lookup_map() fails in drop_on_reuseport in
prog_tests/sk_lookup.c, "server1", the fd of server 1, should be closed.
This patch fixes this by using "goto close_srv1" lable instead of "detach"
to close "server1" in this case.
Fixes: 0ab5539f8584 ("selftests/bpf: Tests for BPF_SK_LOOKUP attach point")
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/86aed33b4b0ea3f04497c757845cff7e8e621a2d.1720515893.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
