| Age | Commit message (Collapse) | Author |
|---|
|
The currently supported minimum gcc version is 5.1. Before that, the
PIC register, when generating Position Independent Code, was considered
"fixed" in the sense that it wasn't in the set of registers available to
the compiler's register allocator. Which, on x86-32, is already a very
small set.
What is more, the register allocator was unable to satisfy extended asm
"=b" constraints. (Yes, PIC code uses %ebx on 32-bit as the base reg.)
With gcc 5.1:
"Reuse of the PIC hard register, instead of using a fixed register,
was implemented on x86/x86-64 targets. This improves generated PIC
code performance as more hard registers can be used. Shared libraries
can significantly benefit from this optimization. Currently it is
switched on only for x86/x86-64 targets. As RA infrastructure is already
implemented for PIC register reuse, other targets might follow this in
the future."
(from: https://gcc.gnu.org/gcc-5/changes.html)
which basically means that the register allocator has a higher degree
of freedom when handling %ebx, including reloading it with the correct
value before a PIC access.
Furthermore:
arch/x86/Makefile:
# Never want PIC in a 32-bit kernel, prevent breakage with GCC built
# with nonstandard options
KBUILD_CFLAGS += -fno-pic
$ gcc -Wp,-MMD,arch/x86/boot/.cpuflags.o.d ... -fno-pic ... -D__KBUILD_MODNAME=kmod_cpuflags -c -o arch/x86/boot/cpuflags.o arch/x86/boot/cpuflags.c
so the 32-bit workaround in cpuid_count() is fixing exactly nothing
because 32-bit configs don't even allow PIC builds.
As to 64-bit builds: they're done using -mcmodel=kernel which produces
RIP-relative addressing for PIC builds and thus does not apply here
either.
So get rid of the thing and make cpuid_count() nice and simple.
There should be no functional changes resulting from this.
[ bp: Expand commit message. ]
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221104124546.196077-1-ubizjak@gmail.com
|
|
When running as a Xen PV guest there is no need for setting up the
realmode trampoline, as realmode isn't supported in this environment.
Trying to setup the trampoline has been proven to be problematic in
some cases, especially when trying to debug early boot problems with
Xen requiring to keep the EFI boot-services memory mapped (some
firmware variants seem to claim basically all memory below 1Mb for boot
services).
Introduce new x86_platform_ops operations for that purpose, which can
be set to a NOP by the Xen PV specific kernel boot code.
[ bp: s/call_init_real_mode/do_init_real_mode/ ]
Fixes: 084ee1c641a0 ("x86, realmode: Relocator for realmode code")
Suggested-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221123114523.3467-1-jgross@suse.com
|
|
The EFI handover protocol permits a bootloader to invoke the kernel as a
EFI PE/COFF application, while passing a bootparams struct as a third
argument to the entrypoint function call.
This has no basis in the UEFI specification, and there are better ways
to pass additional data to a UEFI application (UEFI configuration
tables, UEFI variables, UEFI protocols) than going around the
StartImage() boot service and jumping to a fixed offset in the loaded
image, just to call a different function that takes a third parameter.
The reason for handling struct bootparams in the bootloader was that the
EFI stub could only load initrd images from the EFI system partition,
and so passing it via struct bootparams was needed for loaders like
GRUB, which pass the initrd in memory, and may load it from anywhere,
including from the network. Another motivation was EFI mixed mode, which
could not use the initrd loader in the EFI stub at all due to 32/64 bit
incompatibilities (which will be fixed shortly [0]), and could not
invoke the ordinary PE/COFF entry point either, for the same reasons.
Given that loaders such as GRUB already carried the bootparams handling
in order to implement non-EFI boot, retaining that code and just passing
bootparams to the EFI stub was a reasonable choice (although defining an
alternate entrypoint could have been avoided.) However, the GRUB side
changes never made it upstream, and are only shipped by some of the
distros in their downstream versions.
In the meantime, EFI support has been added to other Linux architecture
ports, as well as to U-boot and systemd, including arch-agnostic methods
for passing initrd images in memory [1], and for doing mixed mode boot
[2], none of them requiring anything like the EFI handover protocol. So
given that only out-of-tree distro GRUB relies on this, let's permit it
to be omitted from the build, in preparation for retiring it completely
at a later date. (Note that systemd-boot does have an implementation as
well, but only uses it as a fallback for booting images that do not
implement the LoadFile2 based initrd loading method, i.e., v5.8 or older)
[0] https://lore.kernel.org/all/20220927085842.2860715-1-ardb@kernel.org/
[1] ec93fc371f01 ("efi/libstub: Add support for loading the initrd from a device path")
[2] 97aa276579b2 ("efi/x86: Add true mixed mode entry point into .compat section")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221122161017.2426828-18-ardb@kernel.org
|
|
Avoid building the mem_encrypt.o object if memory encryption support is
not enabled to begin with.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221122161017.2426828-17-ardb@kernel.org
|
|
Make get_sev_encryption_bit() follow the ordinary i386 calling
convention, and only call it if CONFIG_AMD_MEM_ENCRYPT is actually
enabled. This clarifies the calling code, and makes it more
maintainable.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221122161017.2426828-16-ardb@kernel.org
|
|
Now that the startup32_check_sev_cbit() routine can execute from
anywhere and behaves like an ordinary function, it can be moved where it
belongs.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221122161017.2426828-15-ardb@kernel.org
|
|
Move startup32_check_sev_cbit() into the .text section and turn it into
an ordinary function using the ordinary 32-bit calling convention,
instead of saving/restoring the registers that are known to be live at
the only call site. This improves maintainability, and makes it possible
to move this function out of head_64.S and into a separate compilation
unit that is specific to memory encryption.
Note that this requires the call site to be moved before the mixed mode
check, as %eax will be live otherwise.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221122161017.2426828-14-ardb@kernel.org
|
|
Now that startup32_load_idt() has been refactored into an ordinary
callable function, move it into mem-encrypt.S where it belongs.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221122161017.2426828-13-ardb@kernel.org
|
|
Convert startup32_load_idt() into an ordinary function and move it into
the .text section. This involves turning the rva() immediates into ones
derived from a local label, and preserving/restoring the %ebp and %ebx
as per the calling convention.
Also move the #ifdef to the only existing call site. This makes it clear
that the function call does nothing if support for memory encryption is
not compiled in.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221122161017.2426828-12-ardb@kernel.org
|
|
In preparation for moving startup32_load_idt() out of head_64.S and
turning it into an ordinary function using the ordinary 32-bit calling
convention, pull the global variable reference to boot32_idt up into
startup32_load_idt() so that startup32_set_idt_entry() does not need to
discover its own runtime physical address, which will no longer be
correlated with startup_32 once this code is moved into .text.
While at it, give startup32_set_idt_entry() static linkage.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221122161017.2426828-11-ardb@kernel.org
|
|
Avoid touching register %ecx in startup32_set_idt_entry(), by folding
the MOV, SHL and ORL instructions into a single ORL which no longer
requires a temp register.
This permits ECX to be used as a function argument in a subsequent
patch.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221122161017.2426828-10-ardb@kernel.org
|
|
Tweak the asm and remove some redundant instructions. While at it,
fix the associated comment for style and correctness.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221122161017.2426828-9-ardb@kernel.org
|
|
There is no need for head_32.S and head_64.S both declaring a copy of
the global 'image_offset' variable, so drop those and make the extern C
declaration the definition.
When image_offset is moved to the .c file, it needs to be placed
particularly in the .data section because it lands by default in the
.bss section which is cleared too late, in .Lrelocated, before the first
access to it and thus garbage gets read, leading to SEV guests exploding
in early boot.
This happens only when the SEV guest kernel is loaded through grub. If
supplied with qemu's -kernel command line option, that memory is always
cleared upfront by qemu and all is fine there.
[ bp: Expand commit message with SEV aspect. ]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221122161017.2426828-8-ardb@kernel.org
|
|
Move the implementation of efi32_pe_entry() into efi-mixed.S, which is a
more suitable location that only gets built if EFI mixed mode is
actually enabled.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221122161017.2426828-7-ardb@kernel.org
|
|
Move the efi32_entry() routine out of head_64.S and into efi-mixed.S,
which reduces clutter in the complicated startup routines. It also
permits linkage of some symbols used by code to be made local.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221122161017.2426828-6-ardb@kernel.org
|
|
Move efi32_pe_entry() into the .text section, so that it can be moved
out of head_64.S and into a separate compilation unit in a subsequent
patch.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221122161017.2426828-5-ardb@kernel.org
|
|
Move the logic that chooses between the different EFI entrypoints out of
the 32-bit boot path, and into a 64-bit helper that can perform the same
task much more cleanly. While at it, document the mixed mode boot flow
in a code comment.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221122161017.2426828-4-ardb@kernel.org
|
|
Move the code that stores the arguments passed to the EFI entrypoint
into the .text section, so that it can be moved into a separate
compilation unit in a subsequent patch.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221122161017.2426828-3-ardb@kernel.org
|
|
In preparation for moving the mixed mode specific code out of head_64.S,
rename the existing file to clarify that it contains more than just the
mixed mode thunk.
While at it, clean up the Makefile rules that add it to the build.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221122161017.2426828-2-ardb@kernel.org
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing/probes fixes from Steven Rostedt:
- Fix possible NULL pointer dereference on trace_event_file in
kprobe_event_gen_test_exit()
- Fix NULL pointer dereference for trace_array in
kprobe_event_gen_test_exit()
- Fix memory leak of filter string for eprobes
- Fix a possible memory leak in rethook_alloc()
- Skip clearing aggrprobe's post_handler in kprobe-on-ftrace case which
can cause a possible use-after-free
- Fix warning in eprobe filter creation
- Fix eprobe filter creation as it picked the wrong event for the
fields
* tag 'trace-probes-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/eprobe: Fix eprobe filter to make a filter correctly
tracing/eprobe: Fix warning in filter creation
kprobes: Skip clearing aggrprobe's post_handler in kprobe-on-ftrace case
rethook: fix a potential memleak in rethook_alloc()
tracing/eprobe: Fix memory leak of filter string
tracing: kprobe: Fix potential null-ptr-deref on trace_array in kprobe_event_gen_test_exit()
tracing: kprobe: Fix potential null-ptr-deref on trace_event_file in kprobe_event_gen_test_exit()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix polling to block on watermark like the reads do, as user space
applications get confused when the select says read is available, and
then the read blocks
- Fix accounting of ring buffer dropped pages as it is what is used to
determine if the buffer is empty or not
- Fix memory leak in tracing_read_pipe()
- Fix struct trace_array warning about being declared in parameters
- Fix accounting of ftrace pages used in output at start up.
- Fix allocation of dyn_ftrace pages by subtracting one from order
instead of diving it by 2
- Static analyzer found a case were a pointer being used outside of a
NULL check (rb_head_page_deactivate())
- Fix possible NULL pointer dereference if kstrdup() fails in
ftrace_add_mod()
- Fix memory leak in test_gen_synth_cmd() and test_empty_synth_event()
- Fix bad pointer dereference in register_synth_event() on error path
- Remove unused __bad_type_size() method
- Fix possible NULL pointer dereference of entry in list 'tr->err_log'
- Fix NULL pointer deference race if eprobe is called before the event
setup
* tag 'trace-v6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix race where eprobes can be called before the event
tracing: Fix potential null-pointer-access of entry in list 'tr->err_log'
tracing: Remove unused __bad_type_size() method
tracing: Fix wild-memory-access in register_synth_event()
tracing: Fix memory leak in test_gen_synth_cmd() and test_empty_synth_event()
ftrace: Fix null pointer dereference in ftrace_add_mod()
ring_buffer: Do not deactivate non-existant pages
ftrace: Optimize the allocation for mcount entries
ftrace: Fix the possible incorrect kernel message
tracing: Fix warning on variable 'struct trace_array'
tracing: Fix memory leak in tracing_read_pipe()
ring-buffer: Include dropped pages in counting dirty patches
tracing/ring-buffer: Have polling block on watermark
|
|
The flag that tells the event to call its triggers after reading the event
is set for eprobes after the eprobe is enabled. This leads to a race where
the eprobe may be triggered at the beginning of the event where the record
information is NULL. The eprobe then dereferences the NULL record causing
a NULL kernel pointer bug.
Test for a NULL record to keep this from happening.
Link: https://lore.kernel.org/linux-trace-kernel/20221116192552.1066630-1-rafaelmendsr@gmail.com/
Link: https://lore.kernel.org/linux-trace-kernel/20221117214249.2addbe10@gandalf.local.home
Cc: Linux Trace Kernel <linux-trace-kernel@vger.kernel.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 7491e2c442781 ("tracing: Add a probe that attaches to trace events")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reported-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Do not hold fpregs lock when inheriting FPU permissions because the
fpregs lock disables preemption on RT but fpu_inherit_perms() does
spin_lock_irq(), which, on RT, uses rtmutexes and they need to be
preemptible.
- Check the page offset and the length of the data supplied by
userspace for overflow when specifying a set of pages to add to an
SGX enclave
* tag 'x86_urgent_for_v6.1_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Drop fpregs lock before inheriting FPU permissions
x86/sgx: Add overflow check in sgx_validate_offset_length()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Fix a small race on the task's exit path where there's a
misunderstanding whether the task holds rq->lock or not
- Prevent processes from getting killed when using deprecated or
unknown rseq ABI flags in order to be able to fuzz the rseq() syscall
with syzkaller
* tag 'sched_urgent_for_v6.1_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Fix race in task_call_func()
rseq: Use pr_warn_once() when deprecated/unknown ABI flags are encountered
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Fix an intel PT erratum where CPUs do not support single range output
for more than 4K
- Fix a NULL ptr dereference which can happen after an NMI interferes
with the event enabling dance in amd_pmu_enable_all()
- Free the events array too when freeing uncore contexts on CPU online,
thereby fixing a memory leak
- Improve the pending SIGTRAP check
* tag 'perf_urgent_for_v6.1_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/pt: Fix sampling using single range output
perf/x86/amd: Fix crash due to race between amd_pmu_enable_all, perf NMI and throttling
perf/x86/amd/uncore: Fix memory leak for events array
perf: Improve missing SIGTRAP checking
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Borislav Petkov:
- Fix a build error with clang 11
* tag 'locking_urgent_for_v6.1_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking: Fix qspinlock/x86 inline asm error
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
- Fix writable sections being moved into the rodata region.
Thanks to Nicholas Piggin and Christophe Leroy.
* tag 'powerpc-6.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Fix writable sections being moved into the rodata region
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Five small fixes, all in drivers.
Most of these are error leg freeing issues, with the only really user
visible one being the zfcp fix"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: iscsi: Fix possible memory leak when device_register() failed
scsi: zfcp: Fix double free of FSF request when qdio send fails
scsi: scsi_debug: Fix possible UAF in sdebug_add_host_helper()
scsi: target: tcm_loop: Fix possible name leak in tcm_loop_setup_hba_bus()
scsi: mpi3mr: Suppress command reply debug prints
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Preset accessed bits in Intel VT-d page-directory entries to avoid
hardware error
- Set supervisor bit only when Intel IOMMU has the SRS capability
* tag 'iommu-fixes-v6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Set SRE bit only when hardware has SRS cap
iommu/vt-d: Preset Access bit for IOVA in FL non-leaf paging entries
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Update MAINTAINERS with Nathan and Nicolas as new Kbuild reviewers
- Increment the debian revision for deb-pkg builds
* tag 'kbuild-fixes-v6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Restore .version auto-increment behaviour for Debian packages
MAINTAINERS: Add linux-kbuild's patchwork
MAINTAINERS: Remove Michal Marek from Kbuild maintainers
MAINTAINERS: Add Nathan and Nicolas to Kbuild reviewers
|
|
Pull cifs fixes from Steve French:
- two missing and one incorrect return value checks
- fix leak on tlink mount failure
* tag '6.1-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: add check for returning value of SMB2_set_info_init
cifs: Fix wrong return value checking when GETFLAGS
cifs: add check for returning value of SMB2_close_init
cifs: Fix connections leak when tlink setup failed
|
|
SRS cap is the hardware cap telling if the hardware IOMMU can support
requests seeking supervisor privilege or not. SRE bit in scalable-mode
PASID table entry is treated as Reserved(0) for implementation not
supporting SRS cap.
Checking SRS cap before setting SRE bit can avoid the non-recoverable
fault of "Non-zero reserved field set in PASID Table Entry" caused by
setting SRE bit while there is no SRS cap support. The fault messages
look like below:
DMAR: DRHD: handling fault status reg 2
DMAR: [DMA Read NO_PASID] Request device [00:0d.0] fault addr 0x1154e1000
[fault reason 0x5a]
SM: Non-zero reserved field set in PASID Table Entry
Fixes: 6f7db75e1c46 ("iommu/vt-d: Add second level page table interface")
Cc: stable@vger.kernel.org
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Link: https://lore.kernel.org/r/20221115070346.1112273-1-tina.zhang@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20221116051544.26540-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The A/D bits are preseted for IOVA over first level(FL) usage for both
kernel DMA (i.e, domain typs is IOMMU_DOMAIN_DMA) and user space DMA
usage (i.e., domain type is IOMMU_DOMAIN_UNMANAGED).
Presetting A bit in FL requires to preset the bit in every related paging
entries, including the non-leaf ones. Otherwise, hardware may treat this
as an error. For example, in a case of ECAP_REG.SMPWC==0, DMA faults might
occur with below DMAR fault messages (wrapped for line length) dumped.
DMAR: DRHD: handling fault status reg 2
DMAR: [DMA Read NO_PASID] Request device [aa:00.0] fault addr 0x10c3a6000
[fault reason 0x90]
SM: A/D bit update needed in first-level entry when set up in no snoop
Fixes: 289b3b005cb9 ("iommu/vt-d: Preset A/D bits for user space DMA usage")
Cc: stable@vger.kernel.org
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Link: https://lore.kernel.org/r/20221113010324.1094483-1-tina.zhang@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20221116051544.26540-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a fix for 8042 to stop leaking platform device on unload
- a fix for Goodix touchscreens on devices like Nanote UMPC-01 where we
need to reset controller to load config from firmware
- a workaround for Acer Switch to avoid interrupt storm from home and
power buttons
- a workaround for more ASUS ZenBook models to detect keyboard
controller
- a fix for iforce driver to properly handle communication errors
- touchpad on HP Laptop 15-da3001TU switched to RMI mode
* tag 'input-for-v6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: i8042 - fix leaking of platform device on module removal
Input: i8042 - apply probe defer to more ASUS ZenBook models
Input: soc_button_array - add Acer Switch V 10 to dmi_use_low_level_irq[]
Input: soc_button_array - add use_low_level_irq module parameter
Input: iforce - invert valid length check when fetching device IDs
Input: goodix - try resetting the controller when no config is set
dt-bindings: input: touchscreen: Add compatible for Goodix GT7986U chip
Input: synaptics - switch touchpad on HP Laptop 15-da3001TU to RMI mode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs
Pull zonefs fixes from Damien Le Moal:
- Fix the IO error recovery path for failures happening in the last
zone of device, and that zone is a "runt" zone (smaller than the
other zone). The current code was failing to properly obtain a zone
report in that case.
- Remove the unused to_attr() function as it is unused, causing
compilation warnings with clang.
* tag 'zonefs-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: Remove to_attr() helper function
zonefs: fix zone report size in __zonefs_io_error()
|
|
Avoid resetting the module-wide i8042_platform_device pointer in
i8042_probe() or i8042_remove(), so that the device can be properly
destroyed by i8042_exit() on module unload.
Fixes: 9222ba68c3f4 ("Input: i8042 - add deferred probe support")
Signed-off-by: Chen Jun <chenjun102@huawei.com>
Link: https://lore.kernel.org/r/20221109034148.23821-1-chenjun102@huawei.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Pull io_uring fixes from Jens Axboe:
"This is mostly fixing issues around the poll rework, but also two
tweaks for the multishot handling for accept and receive.
All stable material"
* tag 'io_uring-6.1-2022-11-18' of git://git.kernel.dk/linux:
io_uring: disallow self-propelled ring polling
io_uring: fix multishot recv request leaks
io_uring: fix multishot accept request leaks
io_uring: fix tw losing poll events
io_uring: update res mask in io_poll_check_events
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Fix a build error with CONFIG_CFI_CLANG + CONFIG_FTRACE when
CONFIG_FUNCTION_GRAPH_TRACER is not enabled.
- Fix a BUG_ON triggered by the page table checker due to incorrect
file_map_count for non-leaf pmd/pud (the arm64
pmd_user_accessible_page() not checking whether it's a leaf entry).
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/mm: fix incorrect file_map_count for non-leaf pmd/pud
arm64: ftrace: Define ftrace_stub_graph only with FUNCTION_GRAPH_TRACER
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Christoph:
- Two more bogus nid quirks (Bean Huo, Tiago Dias Ferreira)
- Memory leak fix in nvmet (Sagi Grimberg)
- Regression fix for block cgroups pinning the wrong blkcg, causing
leaks of cgroups and blkcgs (Chris)
- UAF fix for drbd setup error handling (Dan)
- Fix DMA alignment propagation in DM (Keith)
* tag 'block-6.1-2022-11-18' of git://git.kernel.dk/linux:
dm-log-writes: set dma_alignment limit in io_hints
dm-integrity: set dma_alignment limit in io_hints
block: make blk_set_default_limits() private
dm-crypt: provide dma_alignment limit in io_hints
block: make dma_alignment a stacking queue_limit
nvmet: fix a memory leak in nvmet_auth_set_key
nvme-pci: add NVME_QUIRK_BOGUS_NID for Netac NV7000
drbd: use after free in drbd_create_device()
nvme-pci: add NVME_QUIRK_BOGUS_NID for Micron Nitro
blk-cgroup: properly pin the parent in blkcg_css_online
|
|
Pull drm fixes from Dave Airlie:
"I guess the main question is are things settling down, and I'd say
kinda, these are all pretty small fixes, nothing big stands out
really, just seems to be quite a few of them.
Mostly amdgpu and core fixes, with some i915, tegra, vc4, panel bits.
core:
- Fix potential memory leak in drm_dev_init()
- Fix potential null-ptr-deref in drm_vblank_destroy_worker()
- Revert hiding unregistered connectors from userspace, as it breaks
on DP-MST
- Add workaround for DP++ dual mode adaptors that don't support i2c
subaddressing
i915:
- Fix uaf with lmem_userfault_list handling
amdgpu:
- gang submit fixes
- Fix a possible memory leak in ganng submit error path
- DP tunneling fixes
- DCN 3.1 page flip fix
- DCN 3.2.x fixes
- DCN 3.1.4 fixes
- Don't expose degamma on hardware that doesn't support it
- BACO fixes for SMU 11.x
- BACO fixes for SMU 13.x
- Virtual display fix for devices with no display hardware
amdkfd:
- Memory limit regression fix
tegra:
- tegra20 GART fix
vc4:
- Fix error handling in vc4_atomic_commit_tail()
lima:
- Set lima's clkname corrrectly when regulator is missing
panel:
- Set bpc for logictechno panels"
* tag 'drm-fixes-2022-11-19' of git://anongit.freedesktop.org/drm/drm: (28 commits)
gpu: host1x: Avoid trying to use GART on Tegra20
drm/display: Don't assume dual mode adaptors support i2c sub-addressing
drm/amd/pm: fix SMU13 runpm hang due to unintentional workaround
drm/amd/pm: enable runpm support over BACO for SMU13.0.7
drm/amd/pm: enable runpm support over BACO for SMU13.0.0
drm/amdgpu: there is no vbios fb on devices with no display hw (v2)
drm/amdkfd: Fix a memory limit issue
drm/amdgpu: disable BACO support on more cards
drm/amd/display: don't enable DRM CRTC degamma property for DCE
drm/amd/display: Set max for prefetch lines on dcn32
drm/amd/display: use uclk pstate latency for fw assisted mclk validation dcn32
drm/amd/display: Fix prefetch calculations for dcn32
drm/amd/display: Fix optc2_configure warning on dcn314
drm/amd/display: Fix calculation for cursor CAB allocation
Revert "drm: hide unregistered connectors from GETCONNECTOR IOCTL"
drm/amd/display: Support parsing VRAM info v3.0 from VBIOS
drm/amd/display: Fix invalid DPIA AUX reply causing system hang
drm/amdgpu: Add psp_13_0_10_ta firmware to modinfo
drm/amd/display: Add HUBP surface flip interrupt handler
drm/amd/display: Fix access timeout to DPIA AUX at boot time
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Fix deadlock in discontiguous saved segments (DCSS) block device
driver. When adding a disk and scanning partitions the scan would not
break out early without a missed flag.
- Avoid using global register variable for current_stack_pointer due to
an old bug in gcc versions prior to gcc-8.4. Due to this bug a broken
code is generated, which leads to stack corruptions.
* tag 's390-6.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: avoid using global register for current_stack_pointer
s390/dcssblk: fix deadlock when adding a DCSS
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix misbehavior if list_versions DM ioctl races with module loading
- Fix missing decrement of no_sleep_enabled if dm_bufio_client_create
failed
- Allow DM integrity devices to be activated in read-only mode
* tag 'for-6.1/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm integrity: clear the journal on suspend
dm integrity: flush the journal on suspend
dm bufio: Fix missing decrement of no_sleep_enabled if dm_bufio_client_create failed
dm ioctl: fix misbehavior if list_versions races with module loading
|
|
https://gitlab.freedesktop.org/drm/tegra into drm-fixes
drm/tegra: Fixes for v6.1-rc6
This contains a single fix that avoids using the GART on Tegra20 because
it doesn't work well with the way the Tegra DRM driver tries to use it.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221118121614.3511110-1-thierry.reding@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are a number of USB driver fixes and new device ids for 6.1-rc6.
Included in here are:
- new usb-serial device ids
- dwc3 driver fixes for reported problems
- cdns3 driver fixes
- new USB device quirks
- typec driver fixes
- extcon USB typec driver fix
All of these have been in linux-next with no reported issues"
* tag 'usb-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: option: add u-blox LARA-L6 modem
USB: serial: option: add u-blox LARA-R6 00B modem
USB: serial: option: remove old LARA-R6 PID
USB: serial: option: add Fibocom FM160 0x0111 composition
usb: add NO_LPM quirk for Realforce 87U Keyboard
usb: cdns3: host: fix endless superspeed hub port reset
usb: chipidea: fix deadlock in ci_otg_del_timer
usb: dwc3: Do not get extcon device when usb-role-switch is used
usb: typec: tipd: Prevent uninitialized event{1,2} in IRQ handler
usb: typec: mux: Enter safe mode only when pins need to be reconfigured
extcon: usbc-tusb320: Call the Type-C IRQ handler only if a port is registered
Revert "usb: dwc3: disable USB core PHY management"
usb: dwc3: gadget: Return -ESHUTDOWN on ep disable
USB: bcma: Make GPIO explicitly optional
USB: serial: option: add Sierra Wireless EM9191
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fix from Greg KH:
"Here is a single staging driver fix for 6.1-rc6.
It resolves a bogus signed character test as pointed out, and fixed
by, Jason in the rtl8192e driver
It has been in linux-next for a few weeks now with no reported
problems"
* tag 'staging-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: rtl8192e: remove bogus ssid character sign test
|
|
The page table check trigger BUG_ON() unexpectedly when collapse hugepage:
------------[ cut here ]------------
kernel BUG at mm/page_table_check.c:82!
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
Dumping ftrace buffer:
(ftrace buffer empty)
Modules linked in:
CPU: 6 PID: 68 Comm: khugepaged Not tainted 6.1.0-rc3+ #750
Hardware name: linux,dummy-virt (DT)
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : page_table_check_clear.isra.0+0x258/0x3f0
lr : page_table_check_clear.isra.0+0x240/0x3f0
[...]
Call trace:
page_table_check_clear.isra.0+0x258/0x3f0
__page_table_check_pmd_clear+0xbc/0x108
pmdp_collapse_flush+0xb0/0x160
collapse_huge_page+0xa08/0x1080
hpage_collapse_scan_pmd+0xf30/0x1590
khugepaged_scan_mm_slot.constprop.0+0x52c/0xac8
khugepaged+0x338/0x518
kthread+0x278/0x2f8
ret_from_fork+0x10/0x20
[...]
Since pmd_user_accessible_page() doesn't check if a pmd is leaf, it
decrease file_map_count for a non-leaf pmd comes from collapse_huge_page().
and so trigger BUG_ON() unexpectedly.
Fix this problem by using pmd_leaf() insteal of pmd_present() in
pmd_user_accessible_page(). Moreover, use pud_leaf() for
pud_user_accessible_page() too.
Fixes: 42b2547137f5 ("arm64/mm: enable ARCH_SUPPORTS_PAGE_TABLE_CHECK")
Reported-by: Denys Vlasenko <dvlasenk@redhat.com>
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20221117075602.2904324-2-liushixin2@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are a number of small tty and serial driver fixes for 6.1-rc6.
They all resolve reported problems:
- kernel doc build problems with the -rc1 serial driver documentation
update
- n_gsm reported problems
- imx serial driver missing callback
- lots of tiny 8250 driver fixes for reported issues.
All of these have been in linux-next for over a week with no reported
problems"
* tag 'tty-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
docs/driver-api/miscellaneous: Remove kernel-doc of serial_core.c
serial: 8250: Flush DMA Rx on RLSI
serial: 8250_lpss: Use 16B DMA burst with Elkhart Lake
serial: 8250_lpss: Configure DMA also w/o DMA filter
serial: 8250: Fall back to non-DMA Rx if IIR_RDI occurs
tty: n_gsm: fix sleep-in-atomic-context bug in gsm_control_send
Revert "tty: n_gsm: replace kicktimer with delayed_work"
Revert "tty: n_gsm: avoid call of sleeping functions from atomic context"
serial: imx: Add missing .thaw_noirq hook
tty: serial: fsl_lpuart: don't break the on-going transfer when global reset
serial: 8250: omap: Flush PM QOS work on remove
serial: 8250: omap: Fix unpaired pm_runtime_put_sync() in omap8250_remove()
serial: 8250_omap: remove wait loop from Errata i202 workaround
serial: 8250: omap: Fix missing PM runtime calls for omap8250_set_mctrl()
serial: 8250: 8250_omap: Avoid RS485 RTS glitch on ->set_termios()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are two small driver core fixes for 6.1-rc6:
- utsname fix, this one should already be in your tree as it came
from a different tree earlier.
- kernfs bugfix for a much reported syzbot report that seems to keep
getting triggered.
Both of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
kernfs: Fix spurious lockdep warning in kernfs_find_and_get_node_by_id()
kernel/utsname_sysctl.c: Add missing enum uts_proc value
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc and other driver fixes for 6.1-rc6 to
resolve some reported problems. Included in here are:
- iio driver fixes
- binder driver fix
- nvmem driver fix
- vme_vmci information leak fix
- parport fix
- slimbus configuration fix
- coreboot firmware bugfix
- speakup build fix and crash fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (22 commits)
firmware: coreboot: Register bus in module init
nvmem: u-boot-env: fix crc32_data_offset on redundant u-boot-env
slimbus: qcom-ngd: Fix build error when CONFIG_SLIM_QCOM_NGD_CTRL=y && CONFIG_QCOM_RPROC_COMMON=m
docs: update mediator contact information in CoC doc
slimbus: stream: correct presence rate frequencies
nvmem: lan9662-otp: Fix compatible string
binder: validate alloc->mm in ->mmap() handler
parport_pc: Avoid FIFO port location truncation
siox: fix possible memory leak in siox_device_add()
misc/vmw_vmci: fix an infoleak in vmci_host_do_receive_datagram()
speakup: replace utils' u_char with unsigned char
speakup: fix a segfault caused by switching consoles
tools: iio: iio_generic_buffer: Fix read size
iio: imu: bno055: uninitialized variable bug in bno055_trigger_handler()
iio: adc: at91_adc: fix possible memory leak in at91_adc_allocate_trigger()
iio: adc: mp2629: fix potential array out of bound access
iio: adc: mp2629: fix wrong comparison of channel
iio: pressure: ms5611: changed hardcoded SPI speed to value limited
iio: pressure: ms5611: fixed value compensation bug
iio: accel: bma400: Ensure VDDIO is enable defore reading the chip ID.
...
|
