summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-02-02drm/amd/display: revert "Reset fifo after enable otg"Zhan Liu
[Why] This change causes regression, that prevents some systems from lighting up internal displays. [How] Revert this patch until a new solution is ready. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Zhan Liu <Zhan.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-02-02drm/amd/display: watermark latencies is not enough on DCN31Paul Hsieh
[Why] The original latencies were causing underflow in some modes. Resolution: 2880x1620@60p when HDR enable [How] 1. Replace with the up-to-date watermark values based on new measurments 2. Correct the ddr_wm_table name to DDR5 on DCN31 Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Paul Hsieh <paul.hsieh@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-02-02drm/amd/display: Update watermark values for DCN301Agustin Gutierrez
[Why] There is underflow / visual corruption DCN301, for high bandwidth MST DSC configurations such as 2x1440p144 or 2x4k60. [How] Use up-to-date watermark values for DCN301. Reviewed-by: Zhan Liu <zhan.liu@amd.com> Signed-off-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-02-02drm/amdgpu: fix a potential GPU hang on cyan skillfishLang Yu
We observed a GPU hang when querying GMC CG state(i.e., cat amdgpu_pm_info) on cyan skillfish. Acctually, cyan skillfish doesn't support any CG features. Just prevent it from accessing GMC CG registers. Signed-off-by: Lang Yu <Lang.Yu@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-02-02drm/amd: Only run s3 or s0ix if system is configured properlyMario Limonciello
This will cause misconfigured systems to not run the GPU suspend routines. * In APUs that are properly configured system will go into s2idle. * In APUs that are intended to be S3 but user selects s2idle the GPU will stay fully powered for the suspend. * In APUs that are intended to be s2idle and system misconfigured the GPU will stay fully powered for the suspend. * In systems that are intended to be s2idle, but AMD dGPU is also present, the dGPU will go through S3 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-02drm/amd: add support to check whether the system is set to s3Mario Limonciello
This will be used to help make decisions on what to do in misconfigured systems. v2: squash in semicolon fix from Stephen Rothwell Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-02Merge tag 'nfsd-5.17-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd fixes from Chuck Lever: "Notable bug fixes: - Ensure SM_NOTIFY doesn't crash the NFS server host - Ensure NLM locks are cleaned up after client reboot - Fix a leak of internal NFSv4 lease information" * tag 'nfsd-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: nfsd: nfsd4_setclientid_confirm mistakenly expires confirmed client. lockd: fix failure to cleanup client locks lockd: fix server crash on reboot of client holding lock
2022-02-02md: fix NULL pointer deref with nowait but no mddev->queueSong Liu
Leon reported NULL pointer deref with nowait support: [ 15.123761] device-mapper: raid: Loading target version 1.15.1 [ 15.124185] device-mapper: raid: Ignoring chunk size parameter for RAID 1 [ 15.124192] device-mapper: raid: Choosing default region size of 4MiB [ 15.129524] BUG: kernel NULL pointer dereference, address: 0000000000000060 [ 15.129530] #PF: supervisor write access in kernel mode [ 15.129533] #PF: error_code(0x0002) - not-present page [ 15.129535] PGD 0 P4D 0 [ 15.129538] Oops: 0002 [#1] PREEMPT SMP NOPTI [ 15.129541] CPU: 5 PID: 494 Comm: ldmtool Not tainted 5.17.0-rc2-1-mainline #1 9fe89d43dfcb215d2731e6f8851740520778615e [ 15.129546] Hardware name: Gigabyte Technology Co., Ltd. X570 AORUS ELITE/X570 AORUS ELITE, BIOS F36e 10/14/2021 [ 15.129549] RIP: 0010:blk_queue_flag_set+0x7/0x20 [ 15.129555] Code: 00 00 00 0f 1f 44 00 00 48 8b 35 e4 e0 04 02 48 8d 57 28 bf 40 01 \ 00 00 e9 16 c1 be ff 66 0f 1f 44 00 00 0f 1f 44 00 00 89 ff <f0> 48 0f ab 7e 60 \ 31 f6 89 f7 c3 66 66 2e 0f 1f 84 00 00 00 00 00 [ 15.129559] RSP: 0018:ffff966b81987a88 EFLAGS: 00010202 [ 15.129562] RAX: ffff8b11c363a0d0 RBX: ffff8b11e294b070 RCX: 0000000000000000 [ 15.129564] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000000000000001d [ 15.129566] RBP: ffff8b11e294b058 R08: 0000000000000000 R09: 0000000000000000 [ 15.129568] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8b11e294b070 [ 15.129570] R13: 0000000000000000 R14: ffff8b11e294b000 R15: 0000000000000001 [ 15.129572] FS: 00007fa96e826780(0000) GS:ffff8b18deb40000(0000) knlGS:0000000000000000 [ 15.129575] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 15.129577] CR2: 0000000000000060 CR3: 000000010b8ce000 CR4: 00000000003506e0 [ 15.129580] Call Trace: [ 15.129582] <TASK> [ 15.129584] md_run+0x67c/0xc70 [md_mod 1e470c1b6bcf1114198109f42682f5a2740e9531] [ 15.129597] raid_ctr+0x134a/0x28ea [dm_raid 6a645dd7519e72834bd7e98c23497eeade14cd63] [ 15.129604] ? dm_split_args+0x63/0x150 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e] [ 15.129615] dm_table_add_target+0x188/0x380 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e] [ 15.129625] table_load+0x13b/0x370 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e] [ 15.129635] ? dev_suspend+0x2d0/0x2d0 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e] [ 15.129644] ctl_ioctl+0x1bd/0x460 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e] [ 15.129655] dm_ctl_ioctl+0xa/0x20 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e] [ 15.129663] __x64_sys_ioctl+0x8e/0xd0 [ 15.129667] do_syscall_64+0x5c/0x90 [ 15.129672] ? syscall_exit_to_user_mode+0x23/0x50 [ 15.129675] ? do_syscall_64+0x69/0x90 [ 15.129677] ? do_syscall_64+0x69/0x90 [ 15.129679] ? syscall_exit_to_user_mode+0x23/0x50 [ 15.129682] ? do_syscall_64+0x69/0x90 [ 15.129684] ? do_syscall_64+0x69/0x90 [ 15.129686] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 15.129689] RIP: 0033:0x7fa96ecd559b [ 15.129692] Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c \ c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff \ ff 73 01 c3 48 8b 0d a5 a8 0c 00 f7 d8 64 89 01 48 [ 15.129696] RSP: 002b:00007ffcaf85c258 EFLAGS: 00000206 ORIG_RAX: 0000000000000010 [ 15.129699] RAX: ffffffffffffffda RBX: 00007fa96f1b48f0 RCX: 00007fa96ecd559b [ 15.129701] RDX: 00007fa97017e610 RSI: 00000000c138fd09 RDI: 0000000000000003 [ 15.129702] RBP: 00007fa96ebab583 R08: 00007fa97017c9e0 R09: 00007ffcaf85bf27 [ 15.129704] R10: 0000000000000001 R11: 0000000000000206 R12: 00007fa97017e610 [ 15.129706] R13: 00007fa97017e640 R14: 00007fa97017e6c0 R15: 00007fa97017e530 [ 15.129709] </TASK> This is caused by missing mddev->queue check for setting QUEUE_FLAG_NOWAIT Fix this by moving the QUEUE_FLAG_NOWAIT logic to under mddev->queue check. Fixes: f51d46d0e7cb ("md: add support for REQ_NOWAIT") Reported-by: Leon Möller <jkhsjdhjs@totally.rip> Tested-by: Leon Möller <jkhsjdhjs@totally.rip> Cc: Vishal Verma <vverma@digitalocean.com> Signed-off-by: Song Liu <song@kernel.org>
2022-02-02kunit: fix missing f in f-string in run_checks.pyDaniel Latypov
We're missing the `f` prefix to have python do string interpolation, so we'd never end up printing what the actual "unexpected" error is. Fixes: ee92ed38364e ("kunit: add run_checks.py script to validate kunit changes") Signed-off-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: David Gow <davidgow@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-02-02Merge tag 'fsnotify_for_v5.17-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull fanotify fix from Jan Kara: "Fix stale file descriptor in copy_event_to_user" * tag 'fsnotify_for_v5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: fanotify: Fix stale file descriptor in copy_event_to_user()
2022-02-02Merge tag 'linux-kselftest-kunit-fixes-5.17-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull KUnit fixes from Shuah Khan: "A single fix to an error seen on qemu due to a missing import" * tag 'linux-kselftest-kunit-fixes-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: tool: Import missing importlib.abc
2022-02-02libceph: optionally use bounce buffer on recv path in crc modeIlya Dryomov
Both msgr1 and msgr2 in crc mode are zero copy in the sense that message data is read from the socket directly into the destination buffer. We assume that the destination buffer is stable (i.e. remains unchanged while it is being read to) though. Otherwise, CRC errors ensue: libceph: read_partial_message 0000000048edf8ad data crc 1063286393 != exp. 228122706 libceph: osd1 (1)192.168.122.1:6843 bad crc/signature libceph: bad data crc, calculated 57958023, expected 1805382778 libceph: osd2 (2)192.168.122.1:6876 integrity error, bad crc Introduce rxbounce option to enable use of a bounce buffer when receiving message data. In particular this is needed if a mapped image is a Windows VM disk, passed to QEMU. Windows has a system-wide "dummy" page that may be mapped into the destination buffer (potentially more than once into the same buffer) by the Windows Memory Manager in an effort to generate a single large I/O [1][2]. QEMU makes a point of preserving overlap relationships when cloning I/O vectors, so krbd gets exposed to this behaviour. [1] "What Is Really in That MDL?" https://docs.microsoft.com/en-us/previous-versions/windows/hardware/design/dn614012(v=vs.85) [2] https://blogs.msmvps.com/kernelmustard/2005/05/04/dummy-pages/ URL: https://bugzilla.redhat.com/show_bug.cgi?id=1973317 Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org>
2022-02-02libceph: make recv path in secure mode work the same as send pathIlya Dryomov
The recv path of secure mode is intertwined with that of crc mode. While it's slightly more efficient that way (the ciphertext is read into the destination buffer and decrypted in place, thus avoiding two potentially heavy memory allocations for the bounce buffer and the corresponding sg array), it isn't really amenable to changes. Sacrifice that edge and align with the send path which always uses a full-sized bounce buffer (currently there is no other way -- if the kernel crypto API ever grows support for streaming (piecewise) en/decryption for GCM [1], we would be able to easily take advantage of that on both sides). [1] https://lore.kernel.org/all/20141225202830.GA18794@gondor.apana.org.au/ Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org>
2022-02-02Merge tag 'pinctrl-v5.17-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Most interesting and urgent is the Intel stuff affecting Chromebooks and laptops. - Fix up group name building on the Intel Thunderbay - Fix interrupt problems on the Intel Cherryview - Fix some pin data on the Sunxi H616 - Fix up the CONFIG_PINCTRL_ST Kconfig sort order as noted during the merge window - Fix an unexpected interrupt problem on the Intel Sunrisepoint - Fix a glitch when updating IRQ flags on all Intel pin controllers - Revert a Zynqmp patch to unify the pin naming, let's find some better solution - Fix some error paths in the Broadcom BCM2835 driver - Fix a Kconfig problem pertaining to the BCM63XX drivers - Fix the regmap support in the Microchip SGPIO driver" * tag 'pinctrl-v5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: microchip-sgpio: Fix support for regmap pinctrl: bcm63xx: fix unmet dependency on REGMAP for GPIO_REGMAP pinctrl: bcm2835: Fix a few error paths pinctrl: zynqmp: Revert "Unify pin naming" pinctrl: intel: Fix a glitch when updating IRQ flags on a preconfigured line pinctrl: intel: fix unexpected interrupt pinctrl: Place correctly CONFIG_PINCTRL_ST in the Makefile pinctrl: sunxi: Fix H616 I2S3 pin data pinctrl: cherryview: Trigger hwirq0 for interrupt-lines without a mapping pinctrl: thunderbay: rework loops looking for groups names pinctrl: thunderbay: comment process of building functions a bit
2022-02-02net: sparx5: do not refer to skb after passing it onSteen Hegelund
Do not try to use any SKB fields after the packet has been passed up in the receive stack. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Link: https://lore.kernel.org/r/20220202083039.3774851-1-steen.hegelund@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-02ima: Do not print policy rule with inactive LSM labelsStefan Berger
Before printing a policy rule scan for inactive LSM labels in the policy rule. Inactive LSM labels are identified by args_p != NULL and rule == NULL. Fixes: 483ec26eed42 ("ima: ima/lsm policy rule loading logic bug fixes") Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Cc: <stable@vger.kernel.org> # v5.6+ Acked-by: Christian Brauner <brauner@kernel.org> [zohar@linux.ibm.com: Updated "Fixes" tag] Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2022-02-02ima: Allow template selection with ima_template[_fmt]= after ima_hash=Roberto Sassu
Commit c2426d2ad5027 ("ima: added support for new kernel cmdline parameter ima_template_fmt") introduced an additional check on the ima_template variable to avoid multiple template selection. Unfortunately, ima_template could be also set by the setup function of the ima_hash= parameter, when it calls ima_template_desc_current(). This causes attempts to choose a new template with ima_template= or with ima_template_fmt=, after ima_hash=, to be ignored. Achieve the goal of the commit mentioned with the new static variable template_setup_done, so that template selection requests after ima_hash= are not ignored. Finally, call ima_init_template_list(), if not already done, to initialize the list of templates before lookup_template_desc() is called. Reported-by: Guo Zihua <guozihua@huawei.com> Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Cc: stable@vger.kernel.org Fixes: c2426d2ad5027 ("ima: added support for new kernel cmdline parameter ima_template_fmt") Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2022-02-02ima: Remove ima_policy file before directoryStefan Berger
The removal of ima_dir currently fails since ima_policy still exists, so remove the ima_policy file before removing the directory. Fixes: 4af4662fa4a9 ("integrity: IMA policy") Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Cc: <stable@vger.kernel.org> Acked-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2022-02-02integrity: check the return value of audit_log_start()Xiaoke Wang
audit_log_start() returns audit_buffer pointer on success or NULL on error, so it is better to check the return value of it. Fixes: 3323eec921ef ("integrity: IMA as an integrity service provider") Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com> Cc: <stable@vger.kernel.org> Reviewed-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2022-02-02selinux: fix double free of cond_list on error pathsVratislav Bendel
On error path from cond_read_list() and duplicate_policydb_cond_list() the cond_list_destroy() gets called a second time in caller functions, resulting in NULL pointer deref. Fix this by resetting the cond_list_len to 0 in cond_list_destroy(), making subsequent calls a noop. Also consistently reset the cond_list pointer to NULL after freeing. Cc: stable@vger.kernel.org Signed-off-by: Vratislav Bendel <vbendel@redhat.com> [PM: fix line lengths in the description] Signed-off-by: Paul Moore <paul@paul-moore.com>
2022-02-02NFS: Avoid duplicate uncached readdir calls on eofTrond Myklebust
If we've reached the end of the directory, then cache that information in the context so that we don't need to do an uncached readdir in order to rediscover that fact. Fixes: 794092c57f89 ("NFS: Do uncached readdir when we're seeking a cookie in an empty page cache") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2022-02-02NFS: Don't skip directory entries when doing uncached readdirtrondmy@kernel.org
Ensure that we initialise desc->cache_entry_index correctly in uncached_readdir(). Fixes: d1bacf9eb2fd ("NFS: add readdir cache array") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2022-02-02NFS: Don't overfill uncached readdir pagestrondmy@kernel.org
If we're doing an uncached read of the directory, then we ideally want to read only the exact set of entries that will fit in the buffer supplied by the getdents() system call. So unlike the case where we're reading into the page cache, let's send only one READDIR call, before trying to fill up the buffer. Fixes: 35df59d3ef69 ("NFS: Reduce number of RPC calls when doing uncached readdir") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2022-02-02Partially revert "net/smc: Add netlink net namespace support"Dmitry V. Levin
The change of sizeof(struct smc_diag_linkinfo) by commit 79d39fc503b4 ("net/smc: Add netlink net namespace support") introduced an ABI regression: since struct smc_diag_lgrinfo contains an object of type "struct smc_diag_linkinfo", offset of all subsequent members of struct smc_diag_lgrinfo was changed by that change. As result, applications compiled with the old version of struct smc_diag_linkinfo will receive garbage in struct smc_diag_lgrinfo.role if the kernel implements this new version of struct smc_diag_linkinfo. Fix this regression by reverting the part of commit 79d39fc503b4 that changes struct smc_diag_linkinfo. After all, there is SMC_GEN_NETLINK interface which is good enough, so there is probably no need to touch the smc_diag ABI in the first place. Fixes: 79d39fc503b4 ("net/smc: Add netlink net namespace support") Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Reviewed-by: Karsten Graul <kgraul@linux.ibm.com> Link: https://lore.kernel.org/r/20220202030904.GA9742@altlinux.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-02Merge tag 'kvm-riscv-fixes-5.17-1' of https://github.com/kvm-riscv/linux ↵Paolo Bonzini
into HEAD KVM/riscv fixes for 5.17, take #1 - Rework guest entry logic - Make CY, TM, and IR counters accessible in VU mode - Fix SBI implementation version
2022-02-02block: fix DIO handling regressions in blkdev_read_iter()Ilya Dryomov
Commit ceaa762527f4 ("block: move direct_IO into our own read_iter handler") introduced several regressions for bdev DIO: 1. read spanning EOF always returns 0 instead of the number of bytes read. This is because "count" is assigned early and isn't updated when the iterator is truncated: $ lsblk -o name,size /dev/vdb NAME SIZE vdb 1G $ xfs_io -d -c 'pread -b 4M 1021M 4M' /dev/vdb read 0/4194304 bytes at offset 1070596096 0.000000 bytes, 0 ops; 0.0007 sec (0.000000 bytes/sec and 0.0000 ops/sec) instead of $ xfs_io -d -c 'pread -b 4M 1021M 4M' /dev/vdb read 3145728/4194304 bytes at offset 1070596096 3 MiB, 1 ops; 0.0007 sec (3.865 GiB/sec and 1319.2612 ops/sec) 2. truncated iterator isn't reexpanded 3. iterator isn't reverted on blkdev_direct_IO() error 4. zero size read no longer skips atime update Fixes: ceaa762527f4 ("block: move direct_IO into our own read_iter handler") Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220201100420.25875-1-idryomov@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-02-02Merge tag 'mlx5-fixes-2022-02-01' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2022-02-01 This series provides bug fixes to mlx5 driver. Please pull and let me know if there is any problem. Sorry about the long series, but I had to move the top two patches from net-next to net to help avoiding a build break when kspp branch is merged into linus-next on next merge window. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-02fbcon: Add option to enable legacy hardware accelerationHelge Deller
Add a config option CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION to enable bitblt and fillrect hardware acceleration in the framebuffer console. If disabled, such acceleration will not be used, even if it is supported by the graphics hardware driver. If you plan to use DRM as your main graphics output system, you should disable this option since it will prevent compiling in code which isn't used later on when DRM takes over. For all other configurations, e.g. if none of your graphic cards support DRM (yet), DRM isn't available for your architecture, or you can't be sure that the graphic card in the target system will support DRM, you most likely want to enable this option. In the non-accelerated case (e.g. when DRM is used), the inlined fb_scrollmode() function is hardcoded to return SCROLL_REDRAW and as such the compiler is able to optimize much unneccesary code away. In this v3 patch version I additionally changed the GETVYRES() and GETVXRES() macros to take a pointer to the fbcon_display struct. This fixes the build when console rotation is enabled and helps the compiler again to optimize out code. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # v5.10+ Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220202135531.92183-4-deller@gmx.de
2022-02-02Revert "fbcon: Disable accelerated scrolling"Helge Deller
This reverts commit 39aead8373b3c20bb5965c024dfb51a94e526151. Revert the first (of 2) commits which disabled scrolling acceleration in fbcon/fbdev. It introduced a regression for fbdev-supported graphic cards because of the performance penalty by doing screen scrolling by software instead of using the existing graphic card 2D hardware acceleration. Console scrolling acceleration was disabled by dropping code which checked at runtime the driver hardware capabilities for the BINFO_HWACCEL_COPYAREA or FBINFO_HWACCEL_FILLRECT flags and if set, it enabled scrollmode SCROLL_MOVE which uses hardware acceleration to move screen contents. After dropping those checks scrollmode was hard-wired to SCROLL_REDRAW instead, which forces all graphic cards to redraw every character at the new screen position when scrolling. This change effectively disabled all hardware-based scrolling acceleration for ALL drivers, because now all kind of 2D hardware acceleration (bitblt, fillrect) in the drivers isn't used any longer. The original commit message mentions that only 3 DRM drivers (nouveau, omapdrm and gma500) used hardware acceleration in the past and thus code for checking and using scrolling acceleration is obsolete. This statement is NOT TRUE, because beside the DRM drivers there are around 35 other fbdev drivers which depend on fbdev/fbcon and still provide hardware acceleration for fbdev/fbcon. The original commit message also states that syzbot found lots of bugs in fbcon and thus it's "often the solution to just delete code and remove features". This is true, and the bugs - which actually affected all users of fbcon, including DRM - were fixed, or code was dropped like e.g. the support for software scrollback in vgacon (commit 973c096f6a85). So to further analyze which bugs were found by syzbot, I've looked through all patches in drivers/video which were tagged with syzbot or syzkaller back to year 2005. The vast majority fixed the reported issues on a higher level, e.g. when screen is to be resized, or when font size is to be changed. The few ones which touched driver code fixed a real driver bug, e.g. by adding a check. But NONE of those patches touched code of either the SCROLL_MOVE or the SCROLL_REDRAW case. That means, there was no real reason why SCROLL_MOVE had to be ripped-out and just SCROLL_REDRAW had to be used instead. The only reason I can imagine so far was that SCROLL_MOVE wasn't used by DRM and as such it was assumed that it could go away. That argument completely missed the fact that SCROLL_MOVE is still heavily used by fbdev (non-DRM) drivers. Some people mention that using memcpy() instead of the hardware acceleration is pretty much the same speed. But that's not true, at least not for older graphic cards and machines where we see speed decreases by factor 10 and more and thus this change leads to console responsiveness way worse than before. That's why the original commit is to be reverted. By reverting we reintroduce hardware-based scrolling acceleration and fix the performance regression for fbdev drivers. There isn't any impact on DRM when reverting those patches. Signed-off-by: Helge Deller <deller@gmx.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Sven Schnelle <svens@stackframe.org> Cc: stable@vger.kernel.org # v5.10+ Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220202135531.92183-3-deller@gmx.de
2022-02-02Revert "fbdev: Garbage collect fbdev scrolling acceleration, part 1 (from ↵Helge Deller
TODO list)" This reverts commit b3ec8cdf457e5e63d396fe1346cc788cf7c1b578. Revert the second (of 2) commits which disabled scrolling acceleration in fbcon/fbdev. It introduced a regression for fbdev-supported graphic cards because of the performance penalty by doing screen scrolling by software instead of using the existing graphic card 2D hardware acceleration. Console scrolling acceleration was disabled by dropping code which checked at runtime the driver hardware capabilities for the BINFO_HWACCEL_COPYAREA or FBINFO_HWACCEL_FILLRECT flags and if set, it enabled scrollmode SCROLL_MOVE which uses hardware acceleration to move screen contents. After dropping those checks scrollmode was hard-wired to SCROLL_REDRAW instead, which forces all graphic cards to redraw every character at the new screen position when scrolling. This change effectively disabled all hardware-based scrolling acceleration for ALL drivers, because now all kind of 2D hardware acceleration (bitblt, fillrect) in the drivers isn't used any longer. The original commit message mentions that only 3 DRM drivers (nouveau, omapdrm and gma500) used hardware acceleration in the past and thus code for checking and using scrolling acceleration is obsolete. This statement is NOT TRUE, because beside the DRM drivers there are around 35 other fbdev drivers which depend on fbdev/fbcon and still provide hardware acceleration for fbdev/fbcon. The original commit message also states that syzbot found lots of bugs in fbcon and thus it's "often the solution to just delete code and remove features". This is true, and the bugs - which actually affected all users of fbcon, including DRM - were fixed, or code was dropped like e.g. the support for software scrollback in vgacon (commit 973c096f6a85). So to further analyze which bugs were found by syzbot, I've looked through all patches in drivers/video which were tagged with syzbot or syzkaller back to year 2005. The vast majority fixed the reported issues on a higher level, e.g. when screen is to be resized, or when font size is to be changed. The few ones which touched driver code fixed a real driver bug, e.g. by adding a check. But NONE of those patches touched code of either the SCROLL_MOVE or the SCROLL_REDRAW case. That means, there was no real reason why SCROLL_MOVE had to be ripped-out and just SCROLL_REDRAW had to be used instead. The only reason I can imagine so far was that SCROLL_MOVE wasn't used by DRM and as such it was assumed that it could go away. That argument completely missed the fact that SCROLL_MOVE is still heavily used by fbdev (non-DRM) drivers. Some people mention that using memcpy() instead of the hardware acceleration is pretty much the same speed. But that's not true, at least not for older graphic cards and machines where we see speed decreases by factor 10 and more and thus this change leads to console responsiveness way worse than before. That's why the original commit is to be reverted. By reverting we reintroduce hardware-based scrolling acceleration and fix the performance regression for fbdev drivers. There isn't any impact on DRM when reverting those patches. Signed-off-by: Helge Deller <deller@gmx.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Sven Schnelle <svens@stackframe.org> Cc: stable@vger.kernel.org # v5.16+ Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220202135531.92183-2-deller@gmx.de
2022-02-02RISC-V: KVM: Fix SBI implementation versionAnup Patel
The SBI implementation version returned by KVM RISC-V should be the Host Linux version code. Fixes: c62a76859723 ("RISC-V: KVM: Add SBI v0.2 base extension") Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Anup Patel <anup@brainfault.org>
2022-02-02RISC-V: KVM: make CY, TM, and IR counters accessible in VU modeMayuresh Chitale
Those applications that run in VU mode and access the time CSR cause a virtual instruction trap as Guest kernel currently does not initialize the scounteren CSR. To fix this, we should make CY, TM, and IR counters accessibile by default in VU mode (similar to OpenSBI). Fixes: a33c72faf2d73 ("RISC-V: KVM: Implement VCPU create, init and destroy functions") Cc: stable@vger.kernel.org Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com> Signed-off-by: Anup Patel <anup@brainfault.org>
2022-02-02kvm/riscv: rework guest entry logicMark Rutland
In kvm_arch_vcpu_ioctl_run() we enter an RCU extended quiescent state (EQS) by calling guest_enter_irqoff(), and unmask IRQs prior to exiting the EQS by calling guest_exit(). As the IRQ entry code will not wake RCU in this case, we may run the core IRQ code and IRQ handler without RCU watching, leading to various potential problems. Additionally, we do not inform lockdep or tracing that interrupts will be enabled during guest execution, which caan lead to misleading traces and warnings that interrupts have been enabled for overly-long periods. This patch fixes these issues by using the new timing and context entry/exit helpers to ensure that interrupts are handled during guest vtime but with RCU watching, with a sequence: guest_timing_enter_irqoff(); guest_state_enter_irqoff(); < run the vcpu > guest_state_exit_irqoff(); < take any pending IRQs > guest_timing_exit_irqoff(); Since instrumentation may make use of RCU, we must also ensure that no instrumented code is run during the EQS. I've split out the critical section into a new kvm_riscv_enter_exit_vcpu() helper which is marked noinstr. Fixes: 99cdc6c18c2d815e ("RISC-V: Add initial skeletal KVM support") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Anup Patel <anup@brainfault.org> Cc: Atish Patra <atishp@atishpatra.org> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Tested-by: Anup Patel <anup@brainfault.org> Signed-off-by: Anup Patel <anup@brainfault.org>
2022-02-02perf/x86/intel/pt: Fix crash with stop filters in single-range modeTristan Hume
Add a check for !buf->single before calling pt_buffer_region_size in a place where a missing check can cause a kernel crash. Fixes a bug introduced by commit 670638477aed ("perf/x86/intel/pt: Opportunistically use single range output mode"), which added a support for PT single-range output mode. Since that commit if a PT stop filter range is hit while tracing, the kernel will crash because of a null pointer dereference in pt_handle_status due to calling pt_buffer_region_size without a ToPA configured. The commit which introduced single-range mode guarded almost all uses of the ToPA buffer variables with checks of the buf->single variable, but missed the case where tracing was stopped by the PT hardware, which happens when execution hits a configured stop filter. Tested that hitting a stop filter while PT recording successfully records a trace with this patch but crashes without this patch. Fixes: 670638477aed ("perf/x86/intel/pt: Opportunistically use single range output mode") Signed-off-by: Tristan Hume <tristan@thume.ca> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@kernel.org Link: https://lkml.kernel.org/r/20220127220806.73664-1-tristan@thume.ca
2022-02-02perf: uapi: Document perf_event_attr::sig_data truncation on 32 bit ↵Marco Elver
architectures Due to the alignment requirements of siginfo_t, as described in 3ddb3fd8cdb0 ("signal, perf: Fix siginfo_t by avoiding u64 on 32-bit architectures"), siginfo_t::si_perf_data is limited to an unsigned long. However, perf_event_attr::sig_data is an u64, to avoid having to deal with compat conversions. Due to being an u64, it may not immediately be clear to users that sig_data is truncated on 32 bit architectures. Add a comment to explicitly point this out, and hopefully help some users save time by not having to deduce themselves what's happening. Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Marco Elver <elver@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Link: https://lore.kernel.org/r/20220131103407.1971678-3-elver@google.com
2022-02-02selftests/perf_events: Test modification of perf_event_attr::sig_dataMarco Elver
Test that PERF_EVENT_IOC_MODIFY_ATTRIBUTES correctly modifies perf_event_attr::sig_data as well. Signed-off-by: Marco Elver <elver@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Link: https://lore.kernel.org/r/20220131103407.1971678-2-elver@google.com
2022-02-02perf: Copy perf_event_attr::sig_data on modificationMarco Elver
The intent has always been that perf_event_attr::sig_data should also be modifiable along with PERF_EVENT_IOC_MODIFY_ATTRIBUTES, because it is observable by user space if SIGTRAP on events is requested. Currently only PERF_TYPE_BREAKPOINT is modifiable, and explicitly copies relevant breakpoint-related attributes in hw_breakpoint_copy_attr(). This misses copying perf_event_attr::sig_data. Since sig_data is not specific to PERF_TYPE_BREAKPOINT, introduce a helper to copy generic event-type-independent attributes on modification. Fixes: 97ba62b27867 ("perf: Add support for SIGTRAP on perf events") Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Marco Elver <elver@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Link: https://lore.kernel.org/r/20220131103407.1971678-1-elver@google.com
2022-02-02x86/perf: Default set FREEZE_ON_SMI for allPeter Zijlstra
Kyle reported that rr[0] has started to malfunction on Comet Lake and later CPUs due to EFI starting to make use of CPL3 [1] and the PMU event filtering not distinguishing between regular CPL3 and SMM CPL3. Since this is a privilege violation, default disable SMM visibility where possible. Administrators wanting to observe SMM cycles can easily change this using the sysfs attribute while regular users don't have access to this file. [0] https://rr-project.org/ [1] See the Intel white paper "Trustworthy SMM on the Intel vPro Platform" at https://bugzilla.kernel.org/attachment.cgi?id=300300, particularly the end of page 5. Reported-by: Kyle Huey <me@kylehuey.com> Suggested-by: Andrew Cooper <Andrew.Cooper3@citrix.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@kernel.org Link: https://lkml.kernel.org/r/YfKChjX61OW4CkYm@hirez.programming.kicks-ass.net
2022-02-02KVM: s390: Return error on SIDA memop on normal guestJanis Schoetterl-Glausch
Refuse SIDA memops on guests which are not protected. For normal guests, the secure instruction data address designation, which determines the location we access, is not under control of KVM. Fixes: 19e122776886 (KVM: S390: protvirt: Introduce instruction data area bounce buffer) Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com> Cc: stable@vger.kernel.org Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
2022-02-02nvme-rdma: fix possible use-after-free in transport error_recovery workSagi Grimberg
While nvme_rdma_submit_async_event_work is checking the ctrl and queue state before preparing the AER command and scheduling io_work, in order to fully prevent a race where this check is not reliable the error recovery work must flush async_event_work before continuing to destroy the admin queue after setting the ctrl state to RESETTING such that there is no race .submit_async_event and the error recovery handler itself changing the ctrl state. Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2022-02-02nvme-tcp: fix possible use-after-free in transport error_recovery workSagi Grimberg
While nvme_tcp_submit_async_event_work is checking the ctrl and queue state before preparing the AER command and scheduling io_work, in order to fully prevent a race where this check is not reliable the error recovery work must flush async_event_work before continuing to destroy the admin queue after setting the ctrl state to RESETTING such that there is no race .submit_async_event and the error recovery handler itself changing the ctrl state. Tested-by: Chris Leech <cleech@redhat.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2022-02-02nvme: fix a possible use-after-free in controller reset during loadSagi Grimberg
Unlike .queue_rq, in .submit_async_event drivers may not check the ctrl readiness for AER submission. This may lead to a use-after-free condition that was observed with nvme-tcp. The race condition may happen in the following scenario: 1. driver executes its reset_ctrl_work 2. -> nvme_stop_ctrl - flushes ctrl async_event_work 3. ctrl sends AEN which is received by the host, which in turn schedules AEN handling 4. teardown admin queue (which releases the queue socket) 5. AEN processed, submits another AER, calling the driver to submit 6. driver attempts to send the cmd ==> use-after-free In order to fix that, add ctrl state check to validate the ctrl is actually able to accept the AER submission. This addresses the above race in controller resets because the driver during teardown should: 1. change ctrl state to RESETTING 2. flush async_event_work (as well as other async work elements) So after 1,2, any other AER command will find the ctrl state to be RESETTING and bail out without submitting the AER. Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2022-02-01Merge branch '1GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-02-01 This series contains updates to e1000e driver only. Sasha removes CSME handshake with TGL platform as this is not supported and is causing hardware unit hangs to be reported. * '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: e1000e: Handshake with CSME starts from ADL platforms e1000e: Separate ADP board type from TGP ==================== Link: https://lore.kernel.org/r/20220201173754.580305-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-01net/mlx5e: Avoid field-overflowing memcpy()Kees Cook
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally writing across neighboring fields. Use flexible arrays instead of zero-element arrays (which look like they are always overflowing) and split the cross-field memcpy() into two halves that can be appropriately bounds-checked by the compiler. We were doing: #define ETH_HLEN 14 #define VLAN_HLEN 4 ... #define MLX5E_XDP_MIN_INLINE (ETH_HLEN + VLAN_HLEN) ... struct mlx5e_tx_wqe *wqe = mlx5_wq_cyc_get_wqe(wq, pi); ... struct mlx5_wqe_eth_seg *eseg = &wqe->eth; struct mlx5_wqe_data_seg *dseg = wqe->data; ... memcpy(eseg->inline_hdr.start, xdptxd->data, MLX5E_XDP_MIN_INLINE); target is wqe->eth.inline_hdr.start (which the compiler sees as being 2 bytes in size), but copying 18, intending to write across start (really vlan_tci, 2 bytes). The remaining 16 bytes get written into wqe->data[0], covering byte_count (4 bytes), lkey (4 bytes), and addr (8 bytes). struct mlx5e_tx_wqe { struct mlx5_wqe_ctrl_seg ctrl; /* 0 16 */ struct mlx5_wqe_eth_seg eth; /* 16 16 */ struct mlx5_wqe_data_seg data[]; /* 32 0 */ /* size: 32, cachelines: 1, members: 3 */ /* last cacheline: 32 bytes */ }; struct mlx5_wqe_eth_seg { u8 swp_outer_l4_offset; /* 0 1 */ u8 swp_outer_l3_offset; /* 1 1 */ u8 swp_inner_l4_offset; /* 2 1 */ u8 swp_inner_l3_offset; /* 3 1 */ u8 cs_flags; /* 4 1 */ u8 swp_flags; /* 5 1 */ __be16 mss; /* 6 2 */ __be32 flow_table_metadata; /* 8 4 */ union { struct { __be16 sz; /* 12 2 */ u8 start[2]; /* 14 2 */ } inline_hdr; /* 12 4 */ struct { __be16 type; /* 12 2 */ __be16 vlan_tci; /* 14 2 */ } insert; /* 12 4 */ __be32 trailer; /* 12 4 */ }; /* 12 4 */ /* size: 16, cachelines: 1, members: 9 */ /* last cacheline: 16 bytes */ }; struct mlx5_wqe_data_seg { __be32 byte_count; /* 0 4 */ __be32 lkey; /* 4 4 */ __be64 addr; /* 8 8 */ /* size: 16, cachelines: 1, members: 3 */ /* last cacheline: 16 bytes */ }; So, split the memcpy() so the compiler can reason about the buffer sizes. "pahole" shows no size nor member offset changes to struct mlx5e_tx_wqe nor struct mlx5e_umr_wqe. "objdump -d" shows no meaningful object code changes (i.e. only source line number induced differences and optimizations). Fixes: b5503b994ed5 ("net/mlx5e: XDP TX forwarding support") Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-02-01net/mlx5e: Use struct_group() for memcpy() regionKees Cook
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally writing across neighboring fields. Use struct_group() in struct vlan_ethhdr around members h_dest and h_source, so they can be referenced together. This will allow memcpy() and sizeof() to more easily reason about sizes, improve readability, and avoid future warnings about writing beyond the end of h_dest. "pahole" shows no size nor member offset changes to struct vlan_ethhdr. "objdump -d" shows no object code changes. Fixes: 34802a42b352 ("net/mlx5e: Do not modify the TX SKB") Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-02-01net/mlx5e: Avoid implicit modify hdr for decap drop ruleRoi Dayan
Currently the driver adds implicit modify hdr action for decap rules on tunnel devices if the port is an ovs port. This is also done if the action is drop and makes the modify hdr redundant and also the FW doesn't support it and will generate a syndrome. kernel: mlx5_core 0000:08:00.0: mlx5_cmd_check:777:(pid 102063): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x8708c3) Fix it by adding the implicit modify hdr only for fwd actions. Fixes: b16eb3c81fe2 ("net/mlx5: Support internal port as decap route device") Fixes: 077cdda764c7 ("net/mlx5e: TC, Fix memory leak with rules with internal port") Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Ariel Levkovich <lariel@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-02-01net/mlx5e: IPsec: Fix tunnel mode crypto offload for non TCP/UDP trafficRaed Salem
IPsec Tunnel mode crypto offload software parser (SWP) setting in data path currently always set the inner L4 offset regardless of the encapsulated L4 header type and whether it exists in the first place, this breaks non TCP/UDP traffic as such. Set the SWP inner L4 offset only when the IPsec tunnel encapsulated L4 header protocol is TCP/UDP. While at it fix inner ip protocol read for setting MLX5_ETH_WQE_SWP_INNER_L4_UDP flag to address the case where the ip header protocol is IPv6. Fixes: f1267798c980 ("net/mlx5: Fix checksum issue of VXLAN and IPsec crypto offload") Signed-off-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-02-01net/mlx5e: IPsec: Fix crypto offload for non TCP/UDP encapsulated trafficRaed Salem
IPsec crypto offload always set the ethernet segment checksum flags with the inner L4 header checksum flag enabled for encapsulated IPsec offloaded packet regardless of the encapsulated L4 header type, and even if it doesn't exists in the first place, this breaks non TCP/UDP traffic as such. Set the inner L4 checksum flag only when the encapsulated L4 header protocol is TCP/UDP using software parser swp_inner_l4_offset field as indication. Fixes: 5cfb540ef27b ("net/mlx5e: Set IPsec WAs only in IP's non checksum partial case.") Signed-off-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-02-01net/mlx5e: Don't treat small ceil values as unlimited in HTB offloadMaxim Mikityanskiy
The hardware spec defines max_average_bw == 0 as "unlimited bandwidth". max_average_bw is calculated as `ceil / BYTES_IN_MBIT`, which can become 0 when ceil is small, leading to an undesired effect of having no bandwidth limit. This commit fixes it by rounding up small values of ceil to 1 Mbit/s. Fixes: 214baf22870c ("net/mlx5e: Support HTB offload") Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-02-01net/mlx5: E-Switch, Fix uninitialized variable modactMaor Dickman
The variable modact is not initialized before used in command modify header allocation which can cause command to fail. Fix by initializing modact with zeros. Addresses-Coverity: ("Uninitialized scalar variable") Fixes: 8f1e0b97cc70 ("net/mlx5: E-Switch, Mark miss packets with new chain id mapping") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
generated by cgit (git 2.34.1) at 2025-09-11 10:32:13 +0000