summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-01-13Merge tag 'drm-msm-fixes-2023-01-12' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-fixes msm-fixes for v6.3-rc4 Display Fixes: - Fix the documentation for dpu_encoder_phys_wb_init() and dpu_encoder_phys_wb_setup_fb() APIs to address doc warnings - Remove vcca-supply and vdds-supply as mandatory for 14nm PHY and 10nm PHY DT schemas respectively as they are not present on some SOCs using these PHYs - Add the dsi-phy-regulator-ldo-mode to dsi-phy-28nm.yaml as it was missed out during txt to yaml migration - Remove operating-points-v2 and power-domain as a required property for the DSI controller as thats not the case for every SOC - Fix the description from display escape clock to display core clock in the dsi controller yaml - Fix the memory leak for mdp1-mem path for the cases when we return early after failing to get mdp0-mem ICC paths for msm - Fix error handling path in msm_hdmi_dev_probe() to release the phy ref count when devm_pm_runtime_enable() fails - Fix the dp_aux_isr() routine to make sure it doesnt incorrectly signal the aux transaction as complete if the ISR was not an AUX isr. This fixes a big hitter stability bug on chromebooks. - Add protection against null pointer dereference when there is no kms object as in the case of headless adreno GPU in the shutdown path. GPU Fixes: - a5xx: fix quirks to actually be a bitmask and not overwrite each other - a6xx: fix gx halt sequence to avoid 1000ms hang on some devices - kexec shutdown fix - fix potential double free Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGv7=in_MHW3kdkhqh7ZFoVCmnikmr29YYHCXR=7aOEneg@mail.gmail.com
2023-01-12bpf: hash map, avoid deadlock with suitable hash maskTonghao Zhang
The deadlock still may occur while accessed in NMI and non-NMI context. Because in NMI, we still may access the same bucket but with different map_locked index. For example, on the same CPU, .max_entries = 2, we update the hash map, with key = 4, while running bpf prog in NMI nmi_handle(), to update hash map with key = 20, so it will have the same bucket index but have different map_locked index. To fix this issue, using min mask to hash again. Fixes: 20b6cc34ea74 ("bpf: Avoid hashtab deadlock with map_locked") Signed-off-by: Tonghao Zhang <tong@infragraf.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Martin KaFai Lau <martin.lau@linux.dev> Cc: Song Liu <song@kernel.org> Cc: Yonghong Song <yhs@fb.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Stanislav Fomichev <sdf@google.com> Cc: Hao Luo <haoluo@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Hou Tao <houtao1@huawei.com> Acked-by: Yonghong Song <yhs@fb.com> Acked-by: Hou Tao <houtao1@huawei.com> Link: https://lore.kernel.org/r/20230111092903.92389-1-tong@infragraf.org Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2023-01-13Merge tag 'drm-intel-fixes-2023-01-12' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Reserve enough fence slot for i915_vma_unbind_vsync (Nirmoy) - Fix potential use after free (Rob Clark) - Reset engines twice in case of reset failure (Chris) - Use multi-cast registers for SVG Unit registers (Gustavo) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Y8AbHelGeXc5eQ8U@intel.com
2023-01-13Merge tag 'amd-drm-fixes-6.2-2023-01-11' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.2-2023-01-11: amdgpu: - SMU13 fan speed fix - SMU13 fix power cap handling - SMU13 BACO fix - Fix a possible segfault in bo validation error case - Delay removal of firmware framebuffer - Fix error when unloading amdkfd: - SVM fix when clearing vram - GC11 fix for multi-GPU Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230112033004.8184-1-alexander.deucher@amd.com
2023-01-13Merge tag 'drm-misc-fixes-2023-01-12' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Several fixes for amdgpu (all addressing issues with fences), yet another orientation quirk for a Lenovo device, a use-after-free fix for virtio, a regression fix in TTM and a performance regression in drm buddy. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20230112130954.pxt77g3a7rokha42@houat
2023-01-12Merge tag 'net-6.2-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from rxrpc. The rxrpc changes are noticeable large: to address a recent regression has been necessary completing the threaded refactor. Current release - regressions: - rxrpc: - only disconnect calls in the I/O thread - move client call connection to the I/O thread - fix incoming call setup race - eth: mlx5: - restore pkt rate policing support - fix memory leak on updating vport counters Previous releases - regressions: - gro: take care of DODGY packets - ipv6: deduct extension header length in rawv6_push_pending_frames - tipc: fix unexpected link reset due to discovery messages Previous releases - always broken: - sched: disallow noqueue for qdisc classes - eth: ice: fix potential memory leak in ice_gnss_tty_write() - eth: ixgbe: fix pci device refcount leak - eth: mlx5: - fix command stats access after free - fix macsec possible null dereference when updating MAC security entity (SecY)" * tag 'net-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (64 commits) r8152: add vendor/device ID pair for Microsoft Devkit net: stmmac: add aux timestamps fifo clearance wait bnxt: make sure we return pages to the pool net: hns3: fix wrong use of rss size during VF rss config ipv6: raw: Deduct extension header length in rawv6_push_pending_frames net: lan966x: check for ptp to be enabled in lan966x_ptp_deinit() net: sched: disallow noqueue for qdisc classes iavf/iavf_main: actually log ->src mask when talking about it igc: Fix PPS delta between two synchronized end-points ixgbe: fix pci device refcount leak octeontx2-pf: Fix resource leakage in VF driver unbind selftests/net: l2_tos_ttl_inherit.sh: Ensure environment cleanup on failure. selftests/net: l2_tos_ttl_inherit.sh: Run tests in their own netns. selftests/net: l2_tos_ttl_inherit.sh: Set IPv6 addresses with "nodad". net/mlx5e: Fix macsec possible null dereference when updating MAC security entity (SecY) net/mlx5e: Fix macsec ssci attribute handling in offload path net/mlx5: E-switch, Coverity: overlapping copy net/mlx5e: Don't support encap rules with gbp option net/mlx5: Fix ptp max frequency adjustment range net/mlx5e: Fix memory leak on updating vport counters ...
2023-01-12Merge tag 's390-6.2-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Heiko Carstens: - Add various missing READ_ONCE() to cmpxchg() loops prevent the compiler from potentially generating incorrect code. This includes a rather large change to the s390 specific hardware sampling code and its current use of cmpxchg_double(). Do the fix now to get it out of the way of Peter Zijlstra's cmpxchg128() work, and have something that can be backported. The added new code includes a private 128 bit cmpxchg variant which will be removed again after Peter's rework is available. Also note that this 128 bit cmpxchg variant is used to implement 128 bit READ_ONCE(), while strictly speaking it wouldn't be necessary, and _READ_ONCE() should also be sufficient; even though it isn't obvious for all converted locations that this is the case. Therefore use this implementation for for the sake of clarity and consistency for now. - Fix ipl report address handling to avoid kdump failures/hangs. - Fix misuse of #(el)if in kernel decompressor. - Define RUNTIME_DISCARD_EXIT to fix link error with GNU ld < 2.36, caused by the recently changed discard behaviour. - Make sure _edata and _end symbols are always page aligned. - The current header guard DEBUG_H in one of the s390 specific header files is too generic and conflicts with the ath9k wireless driver. Add an _ASM_S390_ prefix to the guard to make it unique. - Update defconfigs. * tag 's390-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: update defconfigs KVM: s390: interrupt: use READ_ONCE() before cmpxchg() s390/percpu: add READ_ONCE() to arch_this_cpu_to_op_simple() s390/cpum_sf: add READ_ONCE() semantics to compare and swap loops s390/kexec: fix ipl report address for kdump s390: fix -Wundef warning for CONFIG_KERNEL_ZSTD s390: define RUNTIME_DISCARD_EXIT to fix link error with GNU ld < 2.36 s390: expicitly align _edata and _end symbols on page boundary s390/debug: add _ASM_S390_ prefix to header guard
2023-01-12Merge tag 'for-linus-6.2-rc4-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: - two cleanup patches - a fix of a memory leak in the Xen pvfront driver - a fix of a locking issue in the Xen hypervisor console driver * tag 'for-linus-6.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/pvcalls: free active map buffer on pvcalls_front_free_map hvc/xen: lock console list traversal x86/xen: Remove the unused function p2m_index() xen: make remove callback of xen driver void returned
2023-01-12Merge tag 'timers-urgent-2023-01-12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer doc fixes from Ingo Molnar: - Fix various DocBook formatting errors in kernel/time/ that generated (justified) warnings during a kernel-doc build. * tag 'timers-urgent-2023-01-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: time: Fix various kernel-doc problems
2023-01-12Merge tag 'perf-urgent-2023-01-12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf events hw enablement from Ingo Molnar: - More hardware-enablement for Intel Meteor Lake & Emerald Rapid systems: pure model ID enumeration additions that do not affect other systems. * tag 'perf-urgent-2023-01-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/uncore: Add Emerald Rapids perf/x86/msr: Add Emerald Rapids perf/x86/msr: Add Meteor Lake support perf/x86/cstate: Add Meteor Lake support
2023-01-12Merge tag 'sched-urgent-2023-01-12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: - Fix scheduler frequency invariance bug related to overly long tickless periods triggering an integer overflow and disabling the feature. - Fix use-after-free bug in dup_user_cpus_ptr(). - Fix do_set_cpus_allowed() deadlock scenarios related to calling kfree() with the pi_lock held. NOTE: the rcu_free() is the 'lazy' solution here - we looked at patches to free the structure after the pi_lock got dropped, but that looked quite a bit messier - and none of this is truly performance critical. We can revisit this if it's too lazy of a solution ... * tag 'sched-urgent-2023-01-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/core: Use kfree_rcu() in do_set_cpus_allowed() sched/core: Fix use-after-free bug in dup_user_cpus_ptr() sched/core: Fix arch_scale_freq_tick() on tickless systems
2023-01-12Merge tag 'core-urgent-2023-01-12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fix from Ingo Molnar: - Fix objtool to be more permissive with hand-written assembly that uses non-function symbols in executable sections. * tag 'core-urgent-2023-01-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Tolerate STT_NOTYPE symbols at end of section
2023-01-12Merge tag 'urgent-nolibc.2023.01.09a' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull nolibc fixes from Paul McKenney: - The fd_set structure was incorrectly defined as arrays of u32 instead of long, which breaks BE64. Fix courtesy of Sven Schnelle. - S_ISxxx macros were incorrectly testing the bits after applying them instead of bitwise ANDing S_FMT with the value. Fix from Warner Losh. - The mips code was randomly broken due to an unprotected "noreorder" directive in the _start code that could prevent the assembler from filling delayed slots. This in turn resulted in random other instructions being placed into those slots. Fix courtesy of Willy Tarreau. - The current nolibc header layout refrains from including files that are not explicitly included by the code using nolibc. Unfortunately, this causes build failures when such files contain definitions that are used (for example) by libgcc. Example definitions include raise() and memset(), which are called by some architectures, but only at certain optimization levels. Fix courtesy of Willy Tarreau. - gcc 11.3 in ARM thumb2 mode at -O2 recognized a memset() construction inside the memset() definition. The compiler replaced this construction with a call to... memset(). Userland cannot be forced to build with -ffreestanding, so an empty asm() statement was introduced into the loop the loop in order to prevent the compiler from making this unproductive transformation. Fix courtesy of Willy Tarreau. - Most of the O_* macros were wrong on RISCV because their octal values were coded as hexadecimal. This resulted in the getdents64() selftest failing. Fix courtesy of Willy Tarreau. This was tested on x86_64, i386, armv5, armv7, thumb1, thumb2, mips and riscv, all at -O0, -Os and -O3. * tag 'urgent-nolibc.2023.01.09a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: tools/nolibc: fix the O_* fcntl/open macro definitions for riscv tools/nolibc: prevent gcc from making memset() loop over itself tools/nolibc: fix missing includes causing build issues at -O0 tools/nolibc: restore mips branch ordering in the _start block tools/nolibc: Fix S_ISxxx macros nolibc: fix fd_set type
2023-01-12kselftest: Fix error message for unconfigured LLVM buildsMark Brown
We are missing a ) when we attempt to complain about not having enough configuration for clang, resulting in the rather inscrutable error: ../lib.mk:23: *** unterminated call to function 'error': missing ')'. Stop. Add the required ) so we print the message we were trying to print. Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-01-12platform/x86: int3472/discrete: Ensure the clk/power enable pins are in ↵Hans de Goede
output mode acpi_get_and_request_gpiod() does not take a gpio_lookup_flags argument specifying that the pins direction should be initialized to a specific value. This means that in some cases the pins might be left in input mode, causing the gpiod_set() calls made to enable the clk / regulator to not work. One example of this problem is the clk-enable GPIO for the ov01a1s sensor on a Dell Latitude 9420 being left in input mode causing the clk to never get enabled. Explicitly set the direction of the pins to output to fix this. Fixes: 5de691bffe57 ("platform/x86: Add intel_skl_int3472 driver") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Reviewed-by: Daniel Scally <djrscally@gmail.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Link: https://lore.kernel.org/r/20230111201426.947853-1-hdegoede@redhat.com
2023-01-12platform/x86/amd: Fix refcount leak in amd_pmc_probeMiaoqian Lin
pci_get_domain_bus_and_slot() takes reference, the caller should release the reference by calling pci_dev_put() after use. Call pci_dev_put() in the error path to fix this. Fixes: 3d7d407dfb05 ("platform/x86: amd-pmc: Add support for AMD Spill to DRAM STB feature") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20221229072534.1381432-1-linmq006@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-01-12platform/x86: intel/pmc/core: Add Meteor Lake mobile supportGayatri Kammela
Add Meteor Lake mobile support to pmc core driver. Meteor Lake mobile parts reuse all the Meteor Lake PCH IPs. Cc: David E Box <david.e.box@linux.intel.com> Signed-off-by: Gayatri Kammela <gayatri.kammela@linux.intel.com> Link: https://lore.kernel.org/r/20221228230553.2497183-1-gayatri.kammela@linux.intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-01-12platform/x86: simatic-ipc: add another modelHenning Schild
Add IPC PX-39A support. Signed-off-by: Henning Schild <henning.schild@siemens.com> Link: https://lore.kernel.org/r/20221222103720.8546-3-henning.schild@siemens.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-01-12platform/x86: simatic-ipc: correct name of a modelHenning Schild
What we called IPC427G should be renamed to BX-39A to be more in line with the actual product name. Signed-off-by: Henning Schild <henning.schild@siemens.com> Link: https://lore.kernel.org/r/20221222103720.8546-2-henning.schild@siemens.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-01-12md: fix incorrect declaration about claim_rdev in md_import_deviceAdrian Huang
Commit fb541ca4c365 ("md: remove lock_bdev / unlock_bdev") removes wrappers for blkdev_get/blkdev_put. However, the uninitialized local static variable of pointer type 'claim_rdev' in md_import_device() is NULL, which leads to the following warning call trace: WARNING: CPU: 22 PID: 1037 at block/bdev.c:577 bd_prepare_to_claim+0x131/0x150 CPU: 22 PID: 1037 Comm: mdadm Not tainted 6.2.0-rc3+ #69 .. RIP: 0010:bd_prepare_to_claim+0x131/0x150 .. Call Trace: <TASK> ? _raw_spin_unlock+0x15/0x30 ? iput+0x6a/0x220 blkdev_get_by_dev.part.0+0x4b/0x300 md_import_device+0x126/0x1d0 new_dev_store+0x184/0x240 md_attr_store+0x80/0xf0 kernfs_fop_write_iter+0x128/0x1c0 vfs_write+0x2be/0x3c0 ksys_write+0x5f/0xe0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc It turns out the md device cannot be used: md: could not open device unknown-block(259,0). md: md127 stopped. Fix the issue by declaring the local static variable of struct type and passing the pointer of the variable to blkdev_get_by_dev(). Fixes: fb541ca4c365 ("md: remove lock_bdev / unlock_bdev") Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Adrian Huang <ahuang12@lenovo.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Song Liu <song@kernel.org>
2023-01-12platform/x86: dell-privacy: Only register SW_CAMERA_LENS_COVER if presentHans de Goede
Unlike keys where userspace only reacts to keypresses, userspace may act on switches in both (0 and 1) of their positions. For example if a SW_TABLET_MODE switch is registered then GNOME will not automatically show the onscreen keyboard when a text field gets focus on touchscreen devices when SW_TABLET_MODE reports 0 and when SW_TABLET_MODE reports 1 libinput will block (filter out) builtin keyboard and touchpad events. So to avoid unwanted side-effects EV_SW type inputs should only be registered if they are actually present, only register SW_CAMERA_LENS_COVER if it is actually there. Fixes: 8af9fa37b8a3 ("platform/x86: dell-privacy: Add support for Dell hardware privacy") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20221221220724.119594-2-hdegoede@redhat.com
2023-01-12platform/x86: dell-privacy: Fix SW_CAMERA_LENS_COVER reportingHans de Goede
Use KE_VSW instead of KE_SW for the SW_CAMERA_LENS_COVER key_entry and get the value of the switch from the status field when handling SW_CAMERA_LENS_COVER events, instead of always reporting 0. Also correctly set the initial SW_CAMERA_LENS_COVER value. Fixes: 8af9fa37b8a3 ("platform/x86: dell-privacy: Add support for Dell hardware privacy") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20221221220724.119594-1-hdegoede@redhat.com
2023-01-12platform/x86: asus-wmi: Don't load fan curves without fanThomas Weißschuh
If we do not have a fan it does not make sense to load curves for it. This removes the following warnings from the kernel log: asus_wmi: fan_curve_get_factory_default (0x00110024) failed: -19 asus_wmi: fan_curve_get_factory_default (0x00110025) failed: -19 Fixes: a2bdf10ce96e ("platform/x86: asus-wmi: Increase FAN_CURVE_BUF_LEN to 32") Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20221221-asus-fan-v1-3-e07f3949725b@weissschuh.net Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-01-12platform/x86: asus-wmi: Ignore fan on E410MAThomas Weißschuh
The ASUS VivoBook has a fan device described in its ACPI tables but does not actually contain any physical fan. Use the quirk to inhibit fan handling. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20221221-asus-fan-v1-2-e07f3949725b@weissschuh.net Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-01-12platform/x86: asus-wmi: Add quirk wmi_ignore_fanThomas Weißschuh
Some laptops have a fan device listed in their ACPI tables but do not actually contain a fan. Introduce a quirk that can be used to override the fan detection logic. This was observed with a ASUS VivoBook E410MA running firmware E410MAB.304. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20221221-asus-fan-v1-1-e07f3949725b@weissschuh.net Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-01-13phy: renesas: r8a779f0-eth-serdes: Fix register settingYoshihiro Shimoda
Fix register setting which is typo in r8a779f0_eth_serdes_chan_setting(). Fixes: 742859441d44 ("phy: renesas: Add Renesas Ethernet SERDES driver for R-Car S4-8") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20221226064216.3895421-1-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-12platform/x86: asus-nb-wmi: Add alternate mapping for KEY_SCREENLOCKHans de Goede
The 0x33 keycode is emitted by Fn + F6 on a ASUS FX705GE laptop. Reported-by: Nemcev Aleksey <Nemcev_Aleksey@inbox.ru> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230112181841.84652-1-hdegoede@redhat.com
2023-01-12platform/x86: asus-nb-wmi: Add alternate mapping for KEY_CAMERAThomas Weißschuh
This keycode is emitted on a Asus VivoBook E410MAB with firmware E410MAB.304. The physical key has a strikken-through camera printed on it. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20221216-asus-key-v1-1-45da124119a3@weissschuh.net Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-01-12phy: usb: sunplus: Fix potential null-ptr-deref in sp_usb_phy_probe()Shang XiaoJing
sp_usb_phy_probe() will call platform_get_resource_byname() that may fail and return NULL. devm_ioremap() will use usbphy->moon4_res_mem->start as input, which may causes null-ptr-deref. Check the ret value of platform_get_resource_byname() to avoid the null-ptr-deref. Fixes: 99d9ccd97385 ("phy: usb: Add USB2.0 phy driver for Sunplus SP7021") Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com> Link: https://lore.kernel.org/r/20221125021222.25687-1-shangxiaojing@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-12platform/surface: aggregator: Add missing call to ssam_request_sync_free()Maximilian Luz
Although rare, ssam_request_sync_init() can fail. In that case, the request should be freed via ssam_request_sync_free(). Currently it is leaked instead. Fix this. Fixes: c167b9c7e3d6 ("platform/surface: Add Surface Aggregator subsystem") Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com> Link: https://lore.kernel.org/r/20221220175608.1436273-1-luzmaximilian@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-01-12platform/surface: aggregator: Ignore command messages not intended for usMaximilian Luz
It is possible that we (the host/kernel driver) receive command messages that are not intended for us. Ignore those for now. The whole story is a bit more complicated: It is possible to enable debug output on SAM, which is sent via SSH command messages. By default this output is sent to a debug connector, with its own target ID (TID=0x03). It is possible to override the target of the debug output and set it to the host/kernel driver. This, however, does not change the original target ID of the message. Meaning, we receive messages with TID=0x03 (debug) but expect to only receive messages with TID=0x00 (host). The problem is that the different target ID also comes with a different scope of request IDs. In particular, these do not follow the standard event rules (i.e. do not fall into a set of small reserved values). Therefore, current message handling interprets them as responses to pending requests and tries to match them up via the request ID. However, these debug output messages are not in fact responses, and therefore this will at best fail to find the request and at worst pass on the wrong data as response for a request. Therefore ignore any command messages not intended for us (host) for now. We can implement support for the debug messages once we have a better understanding of them. Note that this may also provide a bit more stability and avoid some driver confusion in case any other targets want to talk to us in the future, since we don't yet know what to do with those as well. A warning for the dropped messages should suffice for now and also give us a chance of discovering new targets if they come along without any potential for bugs/instabilities. Fixes: c167b9c7e3d6 ("platform/surface: Add Surface Aggregator subsystem") Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com> Link: https://lore.kernel.org/r/20221202223327.690880-2-luzmaximilian@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-01-12Merge tag 'nvme-6.2-2023-01-12' of git://git.infradead.org/nvme into block-6.2Jens Axboe
Pull NVMe fixes from Christoph: "nvme fixes for Linux 6.2 - Identify quirks for Apple controllers (Hector Martin) - fix error handling in nvme_pci_enable (Tong Zhang) - refuse unprivileged passthrough on partitions (Christoph Hellwig) - fix MAINTAINERS to not match nvmem subsystem headers (Russell King)" * tag 'nvme-6.2-2023-01-12' of git://git.infradead.org/nvme: MAINTAINERS: stop nvme matching for nvmem files nvme: don't allow unprivileged passthrough on partitions nvme: replace the "bool vec" arguments with flags in the ioctl path nvme: remove __nvme_ioctl nvme-pci: fix error handling in nvme_pci_enable() nvme-pci: add NVME_QUIRK_IDENTIFY_CNS quirk to Apple T2 controllers nvme-apple: add NVME_QUIRK_IDENTIFY_CNS quirk to fix regression
2023-01-12io_uring/poll: attempt request issue after racy poll wakeupJens Axboe
If we have multiple requests waiting on the same target poll waitqueue, then it's quite possible to get a request triggered and get disappointed in not being able to make any progress with it. If we race in doing so, we'll potentially leave the poll request on the internal tables, but removed from the waitqueue. That means that any subsequent trigger of the poll waitqueue will not kick that request into action, causing an application to potentially wait for completion of a request that will never happen. Fix this by adding a new poll return state, IOU_POLL_REISSUE. Rather than have complicated logic for how to re-arm a given type of request, just punt it for a reissue. While in there, move the 'ret' variable to the only section where it gets used. This avoids confusion the scope of it. Cc: stable@vger.kernel.org Fixes: eb0089d629ba ("io_uring: single shot poll removal optimisation") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-12platform/x86: touchscreen_dmi: Add info for the CSL Panther Tab HDMichael Klein
Add touchscreen info for the CSL Panther Tab HD. Signed-off-by: Michael Klein <m.klein@mvz-labor-lb.de> Link: https://lore.kernel.org/r/20221220121103.uiwn5l7fii2iggct@LLGMVZLB-0037 Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-01-12USB: serial: option: add Quectel EM05-G (GR) modemDuke Xin(辛安文)
The EM05-G (GR) modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively: "RMNET" : AT + DIAG + NMEA + Modem + QMI "MBIM" : MBIM + AT + DIAG + NMEA + Modem The detailed description of the USB configuration for each mode as follows: RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0313 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0313 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Duke Xin(辛安文) <duke_xinanwen@163.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2023-01-12USB: serial: option: add Quectel EM05-G (CS) modemDuke Xin(辛安文)
The EM05-G (CS) modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively: "RMNET" : AT + DIAG + NMEA + Modem + QMI "MBIM" : MBIM + AT + DIAG + NMEA + Modem The detailed description of the USB configuration for each mode as follows: RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=030C Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=030C Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Duke Xin(辛安文) <duke_xinanwen@163.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2023-01-12cifs: Fix uninitialized memory read for smb311 posix symlink createVolker Lendecke
If smb311 posix is enabled, we send the intended mode for file creation in the posix create context. Instead of using what's there on the stack, create the mfsymlink file with 0644. Fixes: ce558b0e17f8a ("smb3: Add posix create context for smb3.11 posix mounts") Cc: stable@vger.kernel.org Signed-off-by: Volker Lendecke <vl@samba.org> Reviewed-by: Tom Talpey <tom@talpey.com> Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-01-12btrfs: do not abort transaction on failure to update log rootFilipe Manana
When syncing a log, if we fail to update a log root in the log root tree, we are aborting the transaction if the failure was not -ENOSPC. This is excessive because there is a chance that a transaction commit can succeed, and therefore avoid to turn the filesystem into RO mode. All we need to be careful about is to mark the log for a full commit, which we already do, to make sure no one commits a super block pointing to an outdated log root tree. So don't abort the transaction if we fail to update a log root in the log root tree, and log an error if the failure is not -ENOSPC, so that it does not go completely unnoticed. CC: stable@vger.kernel.org # 6.0+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-01-12btrfs: do not abort transaction on failure to write log tree when syncing logFilipe Manana
When syncing the log, if we fail to write log tree extent buffers, we mark the log for a full commit and abort the transaction. However we don't need to abort the transaction, all we really need to do is to make sure no one can commit a superblock pointing to new log tree roots. Just because we got a failure writing extent buffers for a log tree, it does not mean we will also fail to do a transaction commit. One particular case is if due to a bug somewhere, when writing log tree extent buffers, the tree checker detects some corruption and the writeout fails because of that. Aborting the transaction can be very disruptive for a user, specially if the issue happened on a root filesystem. One example is the scenario in the Link tag below, where an isolated corruption on log tree leaves was causing transaction aborts when syncing the log. Link: https://lore.kernel.org/linux-btrfs/ae169fc6-f504-28f0-a098-6fa6a4dfb612@leemhuis.info/ CC: stable@vger.kernel.org # 5.15+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-01-12btrfs: add missing setup of log for full commit at add_conflicting_inode()Filipe Manana
When logging conflicting inodes, if we reach the maximum limit of inodes, we return BTRFS_LOG_FORCE_COMMIT to force a transaction commit. However we don't mark the log for full commit (with btrfs_set_log_full_commit()), which means that once we leave the log transaction and before we commit the transaction, some other task may sync the log, which is incomplete as we have not logged all conflicting inodes, leading to some inconsistent in case that log ends up being replayed. So also call btrfs_set_log_full_commit() at add_conflicting_inode(). Fixes: e09d94c9e448 ("btrfs: log conflicting inodes without holding log mutex of the initial inode") CC: stable@vger.kernel.org # 6.1 Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-01-12btrfs: fix directory logging due to race with concurrent index key deletionFilipe Manana
Sometimes we log a directory without holding its VFS lock, so while we logging it, dir index entries may be added or removed. This typically happens when logging a dentry from a parent directory that points to a new directory, through log_new_dir_dentries(), or when while logging some other inode we also need to log its parent directories (through btrfs_log_all_parents()). This means that while we are at log_dir_items(), we may not find a dir index key we found before, because it was deleted in the meanwhile, so a call to btrfs_search_slot() may return 1 (key not found). In that case we return from log_dir_items() with a success value (the variable 'err' has a value of 0). This can lead to a few problems, specially in the case where the variable 'last_offset' has a value of (u64)-1 (and it's initialized to that when it was declared): 1) By returning from log_dir_items() with success (0) and a value of (u64)-1 for '*last_offset_ret', we end up not logging any other dir index keys that follow the missing, just deleted, index key. The (u64)-1 value makes log_directory_changes() not call log_dir_items() again; 2) Before returning with success (0), log_dir_items(), will log a dir index range item covering a range from the last old dentry index (stored in the variable 'last_old_dentry_offset') to the value of 'last_offset'. If 'last_offset' has a value of (u64)-1, then it means if the log is persisted and replayed after a power failure, it will cause deletion of all the directory entries that have an index number between last_old_dentry_offset + 1 and (u64)-1; 3) We can end up returning from log_dir_items() with ctx->last_dir_item_offset having a lower value than inode->last_dir_index_offset, because the former is set to the current key we are processing at process_dir_items_leaf(), and at the end of log_directory_changes() we set inode->last_dir_index_offset to the current value of ctx->last_dir_item_offset. So if for example a deletion of a lower dir index key happened, we set ctx->last_dir_item_offset to that index value, then if we return from log_dir_items() because btrfs_search_slot() returned 1, we end up returning from log_dir_items() with success (0) and then log_directory_changes() sets inode->last_dir_index_offset to a lower value than it had before. This can result in unpredictable and unexpected behaviour when we need to log again the directory in the same transaction, and can result in ending up with a log tree leaf that has duplicated keys, as we do batch insertions of dir index keys into a log tree. So fix this by making log_dir_items() move on to the next dir index key if it does not find the one it was looking for. Reported-by: David Arendt <admin@prnet.org> Link: https://lore.kernel.org/linux-btrfs/ae169fc6-f504-28f0-a098-6fa6a4dfb612@leemhuis.info/ CC: stable@vger.kernel.org # 4.14+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-01-12btrfs: fix missing error handling when logging directory itemsFilipe Manana
When logging a directory, at log_dir_items(), if we get an error when attempting to search the subvolume tree for a dir index item, we end up returning 0 (success) from log_dir_items() because 'err' is left with a value of 0. This can lead to a few problems, specially in the case the variable 'last_offset' has a value of (u64)-1 (and it's initialized to that when it was declared): 1) By returning from log_dir_items() with success (0) and a value of (u64)-1 for '*last_offset_ret', we end up not logging any other dir index keys that follow the missing, just deleted, index key. The (u64)-1 value makes log_directory_changes() not call log_dir_items() again; 2) Before returning with success (0), log_dir_items(), will log a dir index range item covering a range from the last old dentry index (stored in the variable 'last_old_dentry_offset') to the value of 'last_offset'. If 'last_offset' has a value of (u64)-1, then it means if the log is persisted and replayed after a power failure, it will cause deletion of all the directory entries that have an index number between last_old_dentry_offset + 1 and (u64)-1; 3) We can end up returning from log_dir_items() with ctx->last_dir_item_offset having a lower value than inode->last_dir_index_offset, because the former is set to the current key we are processing at process_dir_items_leaf(), and at the end of log_directory_changes() we set inode->last_dir_index_offset to the current value of ctx->last_dir_item_offset. So if for example a deletion of a lower dir index key happened, we set ctx->last_dir_item_offset to that index value, then if we return from log_dir_items() because btrfs_search_slot() returned an error, we end up returning without any error from log_dir_items() and then log_directory_changes() sets inode->last_dir_index_offset to a lower value than it had before. This can result in unpredictable and unexpected behaviour when we need to log again the directory in the same transaction, and can result in ending up with a log tree leaf that has duplicated keys, as we do batch insertions of dir index keys into a log tree. Fix this by setting 'err' to the value of 'ret' in case btrfs_search_slot() or btrfs_previous_item() returned an error. That will result in falling back to a full transaction commit. Reported-by: David Arendt <admin@prnet.org> Link: https://lore.kernel.org/linux-btrfs/ae169fc6-f504-28f0-a098-6fa6a4dfb612@leemhuis.info/ Fixes: e02119d5a7b4 ("Btrfs: Add a write ahead tree log to optimize synchronous operations") CC: stable@vger.kernel.org # 4.14+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-01-12NFSD: replace delayed_work with work_struct for nfsd_client_shrinkerDai Ngo
Since nfsd4_state_shrinker_count always calls mod_delayed_work with 0 delay, we can replace delayed_work with work_struct to save some space and overhead. Also add the call to cancel_work after unregister the shrinker in nfs4_state_shutdown_net. Signed-off-by: Dai Ngo <dai.ngo@oracle.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2023-01-12r8152: add vendor/device ID pair for Microsoft DevkitAndre Przywara
The Microsoft Devkit 2023 is a an ARM64 based machine featuring a Realtek 8153 USB3.0-to-GBit Ethernet adapter. As in their other machines, Microsoft uses a custom USB device ID. Add the respective ID values to the driver. This makes Ethernet work on the MS Devkit device. The chip has been visually confirmed to be a RTL8153. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Link: https://lore.kernel.org/r/20230111133228.190801-1-andre.przywara@arm.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-12drm/vc4: bo: Fix drmm_mutex_init memory hogMaxime Ripard
Commit 374146cad469 ("drm/vc4: Switch to drmm_mutex_init") converted, among other functions, vc4_create_object() to use drmm_mutex_init(). However, that function is used to allocate a BO, and therefore the mutex needs to be freed much sooner than when the DRM device is removed from the system. For each buffer allocation we thus end up allocating a small structure as part of the DRM-managed mechanism that is never freed, eventually leading us to no longer having any free memory anymore. Let's switch back to mutex_init/mutex_destroy to deal with it properly. Fixes: 374146cad469 ("drm/vc4: Switch to drmm_mutex_init") Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20230112091243.490799-1-maxime@cerno.tech
2023-01-12drm: Optimize drm buddy top-down allocation methodArunpravin Paneer Selvam
We are observing performance drop in many usecases which include games, 3D benchmark applications,etc.. To solve this problem, We are strictly not allowing top down flag enabled allocations to steal the memory space from cpu visible region. The idea is, we are sorting each order list entries in ascending order and compare the last entry of each order list in the freelist and return the max block. This patch improves the 3D benchmark scores and solves fragmentation issues. All drm buddy selftests are verfied. drm_buddy: pass:6 fail:0 skip:0 total:6 Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230112120027.3072-1-Arunpravin.PaneerSelvam@amd.com Signed-off-by: Christian König <christian.koenig@amd.com> CC: Cc: stable@vger.kernel.org # 5.18+
2023-01-12drm/ttm: Fix a regression causing kernel oops'esZack Rusin
The branch is explicitly taken if ttm == NULL which means that to avoid a null pointer reference the ttm object can not be used inside. Switch back to dst_mem to avoid kernel oops'es. This fixes kernel oops'es with any buffer objects which don't have ttm_tt, e.g. with vram based screen objects on vmwgfx. Signed-off-by: Zack Rusin <zackr@vmware.com> Fixes: e3c92eb4a84f ("drm/ttm: rework on ttm_resource to use size_t type") Cc: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com> Cc: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230111175015.1134923-1-zack@kde.org Signed-off-by: Christian König <christian.koenig@amd.com>
2023-01-12Merge tag 'spi-fix-v6.2-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: - Fixes for long standing issues with accesses to spidev->spi during teardown in the spidev userspace driver. - Rename the newly added spi-cs-setup-ns DT property to be more in line with our other delay properties before it becomes ABI. - A few driver specific fixes. * tag 'spi-fix-v6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: spidev: remove debug messages that access spidev->spi without locking spi: spidev: fix a race condition when accessing spidev->spi spi: Rename spi-cs-setup-ns property to spi-cs-setup-delay-ns spi: dt-bindings: Rename spi-cs-setup-ns to spi-cs-setup-delay-ns spi: cadence: Fix busy cycles calculation spi: mediatek: Enable irq before the spi registration
2023-01-12Merge tag 'regulator-fix-v6.2-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "A couple of small driver specific fixes, one of which I queued for 6.1 but didn't actually send out so has had *plenty* of testing in -next" * tag 'regulator-fix-v6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: qcom-rpmh: PM8550 ldo11 regulator is an nldo regulator: da9211: Use irq handler when ready
2023-01-12Merge tag 'mtd/fixes-for-6.2-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD fixes from Miquel Raynal: - cfi: Allow building spi-intel standalone to avoid build issues - parsers: scpart: Fix __udivdi3 undefined on mips - parsers: tplink_safeloader: Fix potential memory leak during parsing - Update email of Tudor Ambarus * tag 'mtd/fixes-for-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: MAINTAINERS: Update email of Tudor Ambarus mtd: cfi: allow building spi-intel standalone mtd: parsers: scpart: fix __udivdi3 undefined on mips mtd: parsers: Fix potential memory leak in mtd_parser_tplink_safeloader_parse()
generated by cgit (git 2.34.1) at 2025-09-12 16:02:42 +0000