| Age | Commit message (Collapse) | Author |
|---|
|
When the user moves a running task to a new rdtgroup using the task's
file interface or by deleting its rdtgroup, the resulting change in
CLOSID/RMID must be immediately propagated to the PQR_ASSOC MSR on the
task(s) CPUs.
x86 allows reordering loads with prior stores, so if the task starts
running between a task_curr() check that the CPU hoisted before the
stores in the CLOSID/RMID update then it can start running with the old
CLOSID/RMID until it is switched again because __rdtgroup_move_task()
failed to determine that it needs to be interrupted to obtain the new
CLOSID/RMID.
Refer to the diagram below:
CPU 0 CPU 1
----- -----
__rdtgroup_move_task():
curr <- t1->cpu->rq->curr
__schedule():
rq->curr <- t1
resctrl_sched_in():
t1->{closid,rmid} -> {1,1}
t1->{closid,rmid} <- {2,2}
if (curr == t1) // false
IPI(t1->cpu)
A similar race impacts rdt_move_group_tasks(), which updates tasks in a
deleted rdtgroup.
In both cases, use smp_mb() to order the task_struct::{closid,rmid}
stores before the loads in task_curr(). In particular, in the
rdt_move_group_tasks() case, simply execute an smp_mb() on every
iteration with a matching task.
It is possible to use a single smp_mb() in rdt_move_group_tasks(), but
this would require two passes and a means of remembering which
task_structs were updated in the first loop. However, benchmarking
results below showed too little performance impact in the simple
approach to justify implementing the two-pass approach.
Times below were collected using `perf stat` to measure the time to
remove a group containing a 1600-task, parallel workload.
CPU: Intel(R) Xeon(R) Platinum P-8136 CPU @ 2.00GHz (112 threads)
# mkdir /sys/fs/resctrl/test
# echo $$ > /sys/fs/resctrl/test/tasks
# perf bench sched messaging -g 40 -l 100000
task-clock time ranges collected using:
# perf stat rmdir /sys/fs/resctrl/test
Baseline: 1.54 - 1.60 ms
smp_mb() every matching task: 1.57 - 1.67 ms
[ bp: Massage commit message. ]
Fixes: ae28d1aae48a ("x86/resctrl: Use an IPI instead of task_work_add() to update PQR_ASSOC MSR")
Fixes: 0efc89be9471 ("x86/intel_rdt: Update task closid immediately on CPU in rmdir and unmount")
Signed-off-by: Peter Newman <peternewman@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20221220161123.432120-1-peternewman@google.com
|
|
A previous commit split the hash table for polled requests into two
parts, but didn't get the fdinfo output updated. This means that it's
less useful for debugging, as we may think a given request is not pending
poll.
Fix this up by dumping the locked hash table contents too.
Fixes: 9ca9fb24d5fe ("io_uring: mutex locked poll hashing")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Since
72cbc8f04fe2 ("x86/PAT: Have pat_enabled() properly reflect state when running on Xen")
PAT can be enabled without MTRR.
This has resulted in problems e.g. for a SEV-SNP guest running under Hyper-V,
when trying to establish a new mapping via memremap() with WB caching mode, as
pat_x_mtrr_type() will call mtrr_type_lookup(), which in turn is returning
MTRR_TYPE_INVALID due to MTRR being disabled in this configuration.
The result is a mapping with UC- caching, leading to severe performance
degradation.
Fix that by handling MTRR_TYPE_INVALID the same way as MTRR_TYPE_WRBACK
in pat_x_mtrr_type() because MTRR_TYPE_INVALID means MTRRs are disabled.
[ bp: Massage commit message. ]
Fixes: 72cbc8f04fe2 ("x86/PAT: Have pat_enabled() properly reflect state when running on Xen")
Reported-by: Michael Kelley (LINUX) <mikelley@microsoft.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20230110065427.20767-1-jgross@suse.com
|
|
After applying an engine reset, on some platforms like Jasperlake, we
occasionally detect that the engine state is not cleared until shortly
after the resume. As we try to resume the engine with volatile internal
state, the first request fails with a spurious CS event (it looks like
it reports a lite-restore to the hung context, instead of the expected
idle->active context switch).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221212161338.1007659-1-andi.shyti@linux.intel.com
(cherry picked from commit 3db9d590557da3aa2c952f2fecd3e9b703dad790)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The memory map was wrong. Fix it to prevent the device from randomly
rebooting.
Fixes: 0f5cdb31e850 ("arm64: dts: qcom: Add Xiaomi Libra (Mi 4C) device tree")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221219131918.446587-2-konrad.dybcio@linaro.org
|
|
MSM8992 uses the same mutex hardware as MSM8994. This was wrong
from the start, but never presented as an issue until the sfpb
compatible was given different driver data.
Fixes: 6a6d1978f9c0 ("arm64: dts: msm8992 SoC and LG Bullhead (Nexus 5X) support")
Reported-by: Eugene Lepshy <fekz115@gmail.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221219131918.446587-1-konrad.dybcio@linaro.org
|
|
If an error occurs after a successful pm_genpd_init() call, it should be
undone by a corresponding pm_genpd_remove().
Add the missing call in the error handling path, as already done in the
remove function.
Fixes: bf6910abf548 ("power: avs: Add support for CPR (Core Power Reduction)")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/0f520597dbad89ab99c217c8986912fa53eaf5f9.1671293108.git.christophe.jaillet@wanadoo.fr
|
|
Add reserved regions for memory hole and tz app mem to prevent
rebooting. Also enable cont_splash_mem, it is the same as the
generic 8994 one.
Reported-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Dominik Kobinski <dominikkobinski314@gmail.com>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221230194845.57780-1-dominikkobinski314@gmail.com
|
|
In 746bd29e348f99b4 ("perf build: Use tools/lib headers from install
path") we stopped having the tools/lib/ directory from the kernel
sources in the header include path unconditionally, which breaks the
build on systems with older versions of libbpf-devel, in this case 0.7.0
as some of the structures and function declarations present in the newer
version of libbpf included in the kernel sources (tools/lib/bpf) are not
anymore used, just the ones in the system libbpf.
So instead of trying to provide alternative functions when the
libbpf-bpf_program__set_insns feature test fails, fail a
LIBBPF_DYNAMIC=1 build (requesting the use of the system's libbpf) and
emit this build error message:
$ make LIBBPF_DYNAMIC=1 -C tools/perf
Makefile.config:593: *** Error: libbpf devel library needs to be >= 0.8.0 to build with LIBBPF_DYNAMIC, update or build statically with the version that comes with the kernel sources. Stop.
$
For v6.3 these tests will be revamped and we'll require libbpf 1.0 as a
minimal version for using LIBBPF_DYNAMIC=1, most distros should have it
by now or at v6.3 time.
Fixes: 746bd29e348f99b4 ("perf build: Use tools/lib headers from install path")
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/CAP-5=fVa51_URGsdDFVTzpyGmdDRj_Dj2EKPuDHNQ0BYgMSzUA@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When aops->write_begin() does not initialize fsdata, KMSAN may report
an error passing the latter to aops->write_end().
Fix this by unconditionally initializing fsdata.
Fixes: f2b6a16eb8f5 ("fs: affs convert to new aops")
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Alexander Potapenko <glider@google.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The $(LIBBPF) target should only be a dependency of prepare if the
static version of libbpf is needed. Add a new LIBBPF_STATIC variable
that is set by Makefile.config. Use LIBBPF_STATIC to determine whether
the CFLAGS, etc. need updating and for adding $(LIBBPF) as a prepare
dependency.
As Makefile.config isn't loaded for "clean" as a target, always set
LIBBPF_OUTPUT regardless of whether it is needed for $(LIBBPF). This
is done to minimize conditional logic for $(LIBBPF)-clean.
This issue and an original fix was reported by Mike Leach in:
https://lore.kernel.org/lkml/20230105172243.7238-1-mike.leach@linaro.org/
Fixes: 746bd29e348f99b4 ("perf build: Use tools/lib headers from install path")
Reported-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: bpf@vger.kernel.org
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20230106151320.619514-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
kernel sources
While doing 'make -C tools/perf build-test' one can notice error
messages while trying to install libtraceevent plugins, stop doing that
as libtraceevent isn't anymore a homie.
These are the warnings dealt with:
make_install_prefix_slash_O: make install prefix=/tmp/krava/
failed to find: /tmp/krava/etc/bash_completion.d/perf
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_cfg80211.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_scsi.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_xen.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_function.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_sched_switch.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_mac80211.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_kvm.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_kmem.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_hrtimer.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_jbd2.so
Fixes: 4171925aa9f3f7bf ("tools lib traceevent: Remove libtraceevent")
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/Y7xXz+TSpiCbQGjw@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
recent tracepoint restructuring
Commit 11e9734bcb6a7361 ("mm/slab_common: unify NUMA and UMA version of
tracepoints") adds the field "node" into the tracepoints 'kmalloc' and
'kmem_cache_alloc', so this patch modifies the event process function to
support the field "node".
If field "node" is detected by checking function evsel__field(), it
stats the cross allocation.
When the "node" value is NUMA_NO_NODE (-1), it means the memory can be
allocated from any memory node, in this case, we don't account it as a
cross allocation.
Fixes: 11e9734bcb6a7361 ("mm/slab_common: unify NUMA and UMA version of tracepoints")
Reported-by: Ravi Bangoria <ravi.bangoria@amd.com>
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: https://lore.kernel.org/r/20230108062400.250690-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Commit 11e9734bcb6a7361 ("mm/slab_common: unify NUMA and UMA version of
tracepoints") removed tracepoints 'kmalloc_node' and
'kmem_cache_alloc_node', we need to consider the tool should be backward
compatible.
If it detect the tracepoint "kmem:kmalloc_node", this patch enables the
legacy tracepoints, otherwise, it will ignore them.
Fixes: 11e9734bcb6a7361 ("mm/slab_common: unify NUMA and UMA version of tracepoints")
Reported-by: Ravi Bangoria <ravi.bangoria@amd.com>
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: https://lore.kernel.org/r/20230108062400.250690-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Including libbpf header files should be guarded by HAVE_LIBBPF_SUPPORT.
In bpf_counter.h, move the skeleton utilities under HAVE_BPF_SKEL.
Fixes: d6a735ef3277c45f ("perf bpf_counter: Move common functions to bpf_counter.h")
Reported-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Mike Leach <mike.leach@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20230105172243.7238-1-mike.leach@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This commit addresses the following erroneous situation with file-based
kdump executed on a system with a valid IPL report.
On s390, a kdump kernel, its initrd and IPL report if present are loaded
into a special and reserved on boot memory region - crashkernel. When
a system crashes and kdump was activated before, the purgatory code
is entered first which swaps the crashkernel and [0 - crashkernel size]
memory regions. Only after that the kdump kernel is entered. For this
reason, the pointer to an IPL report in lowcore must point to the IPL report
after the swap and not to the address of the IPL report that was located in
crashkernel memory region before the swap. Failing to do so, makes the
kdump's decompressor try to read memory from the crashkernel memory region
which already contains the production's kernel memory.
The situation described above caused spontaneous kdump failures/hangs
on systems where the Secure IPL is activated because on such systems
an IPL report is always present. In that case kdump's decompressor tried
to parse an IPL report which frequently lead to illegal memory accesses
because an IPL report contains addresses to various data.
Cc: <stable@vger.kernel.org>
Fixes: 99feaa717e55 ("s390/kexec_file: Create ipl report and pass to next kernel")
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The fsl-asoc-card AC'97 support currently tries to route to Playback and
Capture widgets provided by the AC'97 CODEC. This doesn't work since the
generic AC'97 driver registers with an "AC97" at the front of the stream
and hence widget names, update to reflect reality. It's not clear to me
if or how this ever worked.
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230106-asoc-udoo-probe-v1-2-a5d7469d4f67@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The SSI driver calls the AC'97 playback and transmit streams "AC97 Playback"
and "AC97 Capture" respectively. This is the same name used by the generic
AC'97 CODEC driver in ASoC, creating confusion for the Freescale ASoC card
when it attempts to use these widgets in routing. Add a "CPU" in the name
like the regular DAIs registered by the driver to disambiguate.
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230106-asoc-udoo-probe-v1-1-a5d7469d4f67@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Instead of preventing adding AP_VLAN to MLO enabled APs, this check was
preventing adding more than one 4-addr AP_VLAN regardless of the MLO status.
Fix this by adding missing extra checks.
Fixes: ae960ee90bb1 ("wifi: mac80211: prevent VLANs on MLDs")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20221214130326.37756-1-nbd@nbd.name
Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When multiple interfaces are present in the local interface
list, new skb copy is taken before rx processing except for
the first interface. The address translation happens each
time only on the original skb since the hdr pointer is not
updated properly to the newly created skb.
As a result frames start to drop in userspace when address
based checks or search fails.
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Link: https://lore.kernel.org/r/20221208040050.25922-1-quic_srirrama@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Reset multiple BSSID options when all AP related configurations are
reset in ieee80211_stop_ap().
Stale values result in HWSIM test failures (e.g. p2p_group_cli_invalid),
if run after 'he_ap_ema'.
Reported-by: Jouni Malinen <j@w1.fi>
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Link: https://lore.kernel.org/r/20221221185616.11514-1-quic_alokad@quicinc.com
Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
mac80211 must not enable aggregation wile transmitting a fragmented
MPDU. Enforce that for mac80211 internal TX queues (iTXQs).
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/oe-lkp/202301021738.7cd3e6ae-oliver.sang@intel.com
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Link: https://lore.kernel.org/r/20230106223141.98696-1-alexander@wetzel-home.de
Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
ieee80211_tx_ba_session_handle_start() may get NULL for sdata when a
deauthentication is ongoing.
Here a trace triggering the race with the hostapd test
multi_ap_fronthaul_on_ap:
(gdb) list *drv_ampdu_action+0x46
0x8b16 is in drv_ampdu_action (net/mac80211/driver-ops.c:396).
391 int ret = -EOPNOTSUPP;
392
393 might_sleep();
394
395 sdata = get_bss_sdata(sdata);
396 if (!check_sdata_in_driver(sdata))
397 return -EIO;
398
399 trace_drv_ampdu_action(local, sdata, params);
400
wlan0: moving STA 02:00:00:00:03:00 to state 3
wlan0: associated
wlan0: deauthenticating from 02:00:00:00:03:00 by local choice (Reason: 3=DEAUTH_LEAVING)
wlan3.sta1: Open BA session requested for 02:00:00:00:00:00 tid 0
wlan3.sta1: dropped frame to 02:00:00:00:00:00 (unauthorized port)
wlan0: moving STA 02:00:00:00:03:00 to state 2
wlan0: moving STA 02:00:00:00:03:00 to state 1
wlan0: Removed STA 02:00:00:00:03:00
wlan0: Destroyed STA 02:00:00:00:03:00
BUG: unable to handle page fault for address: fffffffffffffb48
PGD 11814067 P4D 11814067 PUD 11816067 PMD 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 2 PID: 133397 Comm: kworker/u16:1 Tainted: G W 6.1.0-rc8-wt+ #59
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-20220807_005459-localhost 04/01/2014
Workqueue: phy3 ieee80211_ba_session_work [mac80211]
RIP: 0010:drv_ampdu_action+0x46/0x280 [mac80211]
Code: 53 48 89 f3 be 89 01 00 00 e8 d6 43 bf ef e8 21 46 81 f0 83 bb a0 1b 00 00 04 75 0e 48 8b 9b 28 0d 00 00 48 81 eb 10 0e 00 00 <8b> 93 58 09 00 00 f6 c2 20 0f 84 3b 01 00 00 8b 05 dd 1c 0f 00 85
RSP: 0018:ffffc900025ebd20 EFLAGS: 00010287
RAX: 0000000000000000 RBX: fffffffffffff1f0 RCX: ffff888102228240
RDX: 0000000080000000 RSI: ffffffff918c5de0 RDI: ffff888102228b40
RBP: ffffc900025ebd40 R08: 0000000000000001 R09: 0000000000000001
R10: 0000000000000001 R11: 0000000000000000 R12: ffff888118c18ec0
R13: 0000000000000000 R14: ffffc900025ebd60 R15: ffff888018b7efb8
FS: 0000000000000000(0000) GS:ffff88817a600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: fffffffffffffb48 CR3: 0000000105228006 CR4: 0000000000170ee0
Call Trace:
<TASK>
ieee80211_tx_ba_session_handle_start+0xd0/0x190 [mac80211]
ieee80211_ba_session_work+0xff/0x2e0 [mac80211]
process_one_work+0x29f/0x620
worker_thread+0x4d/0x3d0
? process_one_work+0x620/0x620
kthread+0xfb/0x120
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30
</TASK>
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Link: https://lore.kernel.org/r/20221230121850.218810-2-alexander@wetzel-home.de
Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When a running wake_tx_queue() call is aborted due to a hw queue stop
the corresponding iTXQ is not always correctly marked for resumption:
wake_tx_push_queue() can stops the queue run without setting
@IEEE80211_TXQ_STOP_NETIF_TX.
Without the @IEEE80211_TXQ_STOP_NETIF_TX flag __ieee80211_wake_txqs()
will not schedule a new queue run and remaining frames in the queue get
stuck till another frame is queued to it.
Fix the issue for all drivers - also the ones with custom wake_tx_queue
callbacks - by moving the logic into ieee80211_tx_dequeue() and drop the
redundant @txqs_stopped.
@IEEE80211_TXQ_STOP_NETIF_TX is also renamed to @IEEE80211_TXQ_DIRTY to
better describe the flag.
Fixes: c850e31f79f0 ("wifi: mac80211: add internal handler for wake_tx_queue")
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Link: https://lore.kernel.org/r/20221230121850.218810-1-alexander@wetzel-home.de
Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There are some codepaths that do not initialize rx->link_sta properly. This
causes a crash in places which assume that rx->link_sta is valid if rx->sta
is valid.
One known instance is triggered by __ieee80211_rx_h_amsdu being called from
fast-rx. It results in a crash like this one:
BUG: kernel NULL pointer dereference, address: 00000000000000a8
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page PGD 0 P4D 0
Oops: 0002 [#1] PREEMPT SMP PTI
CPU: 1 PID: 506 Comm: mt76-usb-rx phy Tainted: G E 6.1.0-debian64x+1.7 #3
Hardware name: ZOTAC ZBOX-ID92/ZBOX-IQ01/ZBOX-ID92/ZBOX-IQ01, BIOS B220P007 05/21/2014
RIP: 0010:ieee80211_deliver_skb+0x62/0x1f0 [mac80211]
Code: 00 48 89 04 24 e8 9e a7 c3 df 89 c0 48 03 1c c5 a0 ea 39 a1 4c 01 6b 08 48 ff 03 48
83 7d 28 00 74 11 48 8b 45 30 48 63 55 44 <48> 83 84 d0 a8 00 00 00 01 41 8b 86 c0
11 00 00 8d 50 fd 83 fa 01
RSP: 0018:ffff999040803b10 EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffffb9903f496480 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff999040803ce0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8d21828ac900
R13: 000000000000004a R14: ffff8d2198ed89c0 R15: ffff8d2198ed8000
FS: 0000000000000000(0000) GS:ffff8d24afe80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000a8 CR3: 0000000429810002 CR4: 00000000001706e0
Call Trace:
<TASK>
__ieee80211_rx_h_amsdu+0x1b5/0x240 [mac80211]
? ieee80211_prepare_and_rx_handle+0xcdd/0x1320 [mac80211]
? __local_bh_enable_ip+0x3b/0xa0
ieee80211_prepare_and_rx_handle+0xcdd/0x1320 [mac80211]
? prepare_transfer+0x109/0x1a0 [xhci_hcd]
ieee80211_rx_list+0xa80/0xda0 [mac80211]
mt76_rx_complete+0x207/0x2e0 [mt76]
mt76_rx_poll_complete+0x357/0x5a0 [mt76]
mt76u_rx_worker+0x4f5/0x600 [mt76_usb]
? mt76_get_min_avg_rssi+0x140/0x140 [mt76]
__mt76_worker_fn+0x50/0x80 [mt76]
kthread+0xed/0x120
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30
Since the initialization of rx->link and rx->link_sta is rather convoluted
and duplicated in many places, clean it up by using a helper function to
set it.
Fixes: ccdde7c74ffd ("wifi: mac80211: properly implement MLO key handling")
Fixes: b320d6c456ff ("wifi: mac80211: use correct rx link_sta instead of default")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20221230200747.19040-1-nbd@nbd.name
[remove unnecessary rx->sta->sta.mlo check]
Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
With 'GNU assembler (GNU Binutils for Debian) 2.39.90.20221231' the
build now reports:
arch/x86/realmode/rm/../../boot/bioscall.S: Assembler messages:
arch/x86/realmode/rm/../../boot/bioscall.S:35: Warning: found `movsd'; assuming `movsl' was meant
arch/x86/realmode/rm/../../boot/bioscall.S:70: Warning: found `movsd'; assuming `movsl' was meant
arch/x86/boot/bioscall.S: Assembler messages:
arch/x86/boot/bioscall.S:35: Warning: found `movsd'; assuming `movsl' was meant
arch/x86/boot/bioscall.S:70: Warning: found `movsd'; assuming `movsl' was meant
Which is due to:
PR gas/29525
Note that with the dropped CMPSD and MOVSD Intel Syntax string insn
templates taking operands, mixed IsString/non-IsString template groups
(with memory operands) cannot occur anymore. With that
maybe_adjust_templates() becomes unnecessary (and is hence being
removed).
More details: https://sourceware.org/bugzilla/show_bug.cgi?id=29525
Borislav Petkov further explains:
" the particular problem here is is that the 'd' suffix is
"conflicting" in the sense that you can have SSE mnemonics like movsD %xmm...
and the same thing also for string ops (which is the case here) so apparently
the agreement in binutils land is to use the always accepted suffixes 'l' or 'q'
and phase out 'd' slowly... "
Fixes: 7a734e7dd93b ("x86, setup: "glove box" BIOS calls -- infrastructure")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/Y71I3Ex2pvIxMpsP@hirez.programming.kicks-ass.net
|
|
Pull ksmb server fixes from Steve French:
- fix possible infinite loop in socket handler
- fix possible panic in ntlmv2 authentication
- fix error handling on tree connect
* tag '6.2-rc3-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix infinite loop in ksmbd_conn_handler_loop()
ksmbd: check nt_len to be at least CIFS_ENCPWD_SIZE in ksmbd_decode_ntlmssp_auth_blob
ksmbd: send proper error response in smb2_tree_connect()
|
|
Because typing is hard...
Fixes: 0862ff059c9e ("sh/mm: Make pmd_t similar to pte_t")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This fixes a potential memory leak of dma_fence objects in the CS code
as well as glitches in firefox because of missing pipeline sync.
v2: use the scheduler instead of the fence context
Signed-off-by: Christian König <christian.koenig@amd.com>
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2323
Tested-by: Michal Kubecek mkubecek@suse.cz
Tested-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230109130120.73389-1-christian.koenig@amd.com
|
|
During setup, there is a possible race between a page invalidate
and hardware programming. Add a covering invalidate over the user
target range during setup. If anything within that range is
invalidated during setup, fail the setup. Once set up, each
TID will have its own invalidate callback and invalidate.
Fixes: 3889551db212 ("RDMA/hfi1: Use mmu_interval_notifier_insert for user_exp_rcv")
Signed-off-by: Dean Luick <dean.luick@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Link: https://lore.kernel.org/r/167328549178.1472310.9867497376936699488.stgit@awfm-02.cornelisnetworks.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
When a user expected receive page is unmapped, it should be
immediately removed from hardware rather than depend on a
reaction from user space.
Fixes: 2677a7680e77 ("IB/hfi1: Fix memory leak during unexpected shutdown")
Signed-off-by: Dean Luick <dean.luick@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Link: https://lore.kernel.org/r/167328548663.1472310.7871808081861622659.stgit@awfm-02.cornelisnetworks.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Fix three error exit issues in expected receive setup.
Re-arrange error exits to increase readability.
Issues and fixes:
1. Possible missed page unpin if tidlist copyout fails and
not all pinned pages where made part of a TID.
Fix: Unpin the unused pages.
2. Return success with unset return values tidcnt and length
when no pages were pinned.
Fix: Return -ENOSPC if no pages were pinned.
3. Return success with unset return values tidcnt and length when
no rcvarray entries available.
Fix: Return -ENOSPC if no rcvarray entries are available.
Fixes: 7e7a436ecb6e ("staging/hfi1: Add TID entry program function body")
Fixes: 97736f36dbeb ("IB/hfi1: Validate page aligned for a given virtual addres")
Fixes: f404ca4c7ea8 ("IB/hfi1: Refactor hfi_user_exp_rcv_setup() IOCTL")
Signed-off-by: Dean Luick <dean.luick@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Link: https://lore.kernel.org/r/167328548150.1472310.1492305874804187634.stgit@awfm-02.cornelisnetworks.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
To avoid a race, reserve the number of user expected
TIDs before setup.
Fixes: 7e7a436ecb6e ("staging/hfi1: Add TID entry program function body")
Signed-off-by: Dean Luick <dean.luick@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Link: https://lore.kernel.org/r/167328547636.1472310.7419712824785353905.stgit@awfm-02.cornelisnetworks.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
A zero length user buffer makes no sense and the code
does not handle it correctly. Instead, reject a
zero length as invalid.
Fixes: 97736f36dbeb ("IB/hfi1: Validate page aligned for a given virtual addres")
Signed-off-by: Dean Luick <dean.luick@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Link: https://lore.kernel.org/r/167328547120.1472310.6362802432127399257.stgit@awfm-02.cornelisnetworks.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
When registering a new DMA MR after selecting the best aligned page size
for it, we iterate over the given sglist to split each entry to smaller,
aligned to the selected page size, DMA blocks.
In given circumstances where the sg entry and page size fit certain
sizes and the sg entry is not aligned to the selected page size, the
total size of the aligned pages we need to cover the sg entry is >= 4GB.
Under this circumstances, while iterating page aligned blocks, the
counter responsible for counting how much we advanced from the start of
the sg entry is overflowed because its type is u32 and we pass 4GB in
size. This can lead to an infinite loop inside the iterator function
because the overflow prevents the counter to be larger
than the size of the sg entry.
Fix the presented problem by changing the advancement condition to
eliminate overflow.
Backtrace:
[ 192.374329] efa_reg_user_mr_dmabuf
[ 192.376783] efa_register_mr
[ 192.382579] pgsz_bitmap 0xfffff000 rounddown 0x80000000
[ 192.386423] pg_sz [0x80000000] umem_length[0xc0000000]
[ 192.392657] start 0x0 length 0xc0000000 params.page_shift 31 params.page_num 3
[ 192.399559] hp_cnt[3], pages_in_hp[524288]
[ 192.403690] umem->sgt_append.sgt.nents[1]
[ 192.407905] number entries: [1], pg_bit: [31]
[ 192.411397] biter->__sg_nents [1] biter->__sg [0000000008b0c5d8]
[ 192.415601] biter->__sg_advance [665837568] sg_dma_len[3221225472]
[ 192.419823] biter->__sg_nents [1] biter->__sg [0000000008b0c5d8]
[ 192.423976] biter->__sg_advance [2813321216] sg_dma_len[3221225472]
[ 192.428243] biter->__sg_nents [1] biter->__sg [0000000008b0c5d8]
[ 192.432397] biter->__sg_advance [665837568] sg_dma_len[3221225472]
Fixes: a808273a495c ("RDMA/verbs: Add a DMA iterator to return aligned contiguous memory blocks")
Signed-off-by: Yonatan Nachum <ynachum@amazon.com>
Link: https://lore.kernel.org/r/20230109133711.13678-1-ynachum@amazon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
resources allocated like mcam entries to support the Ntuple feature
and hash tables for the tc feature are not getting freed in driver
unbind. This patch fixes the issue.
Fixes: 2da489432747 ("octeontx2-pf: devlink params support to set mcam entry count")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Link: https://lore.kernel.org/r/20230109061325.21395-1-hkelam@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The correct address offset is 0x12100.
Fixes: 31be791e26cf ("arm64: dts: marvell: Add UART1-3 for AC5/AC5X")
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Guillaume Nault says:
====================
selftests/net: Isolate l2_tos_ttl_inherit.sh in its own netns.
l2_tos_ttl_inherit.sh uses a veth pair to run its tests, but only one
of the veth interfaces runs in a dedicated netns. The other one remains
in the initial namespace where the existing network configuration can
interfere with the setup used for the tests.
Isolate both veth devices in their own netns and ensure everything gets
cleaned up when the script exits.
Link: https://lore.kernel.org/netdev/924f1062-ab59-9b88-3b43-c44e73a30387@alu.unizg.hr/
====================
Link: https://lore.kernel.org/r/cover.1673191942.git.gnault@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use 'set -e' and an exit handler to stop the script if a command fails
and ensure the test environment is cleaned up in any case. Also, handle
the case where the script is interrupted by SIGINT.
The only command that's expected to fail is 'wait $ping_pid', since
it's killed by the script. Handle this case with '|| true' to make it
play well with 'set -e'.
Finally, return the Kselftest SKIP code (4) when the script breaks
because of an environment problem or a command line failure. The 0 and
1 return codes should now reliably indicate that all tests have been
run (0: all tests run and passed, 1: all tests run but at least one
failed, 4: test script didn't run completely).
Fixes: b690842d12fd ("selftests/net: test l2 tunnel TOS/TTL inheriting")
Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This selftest currently runs half in the current namespace and half in
a netns of its own. Therefore, the test can fail if the current
namespace is already configured with incompatible parameters (for
example if it already has a veth0 interface).
Adapt the script to put both ends of the veth pair in their own netns.
Now veth0 is created in NS0 instead of the current namespace, while
veth1 is set up in NS1 (instead of the 'testing' netns).
The user visible netns names are randomised to minimise the risk of
conflicts with already existing namespaces. The cleanup() function
doesn't need to remove the virtual interface anymore: deleting NS0 and
NS1 automatically removes the virtual interfaces they contained.
We can remove $ns, which was only used to run ip commands in the
'testing' netns (let's use the builtin "-netns" option instead).
However, we still need a similar functionality as ping and tcpdump
now need to run in NS0. So we now have $RUN_NS0 for that.
Fixes: b690842d12fd ("selftests/net: test l2 tunnel TOS/TTL inheriting")
Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The ping command can run before DAD completes. In that case, ping may
fail and break the selftest.
We don't need DAD here since we're working on isolated device pairs.
Fixes: b690842d12fd ("selftests/net: test l2 tunnel TOS/TTL inheriting")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
As reported by syzbot [1], kvcalloc() cannot work with __GFP_NOFAIL.
Let's use kcalloc() instead.
[1] https://lore.kernel.org/r/0000000000007796bd05f1852ec2@google.com
Reported-by: syzbot+c3729cda01706a04fb98@syzkaller.appspotmail.com
Fixes: fe3e5914e6dc ("erofs: try to leave (de)compressed_pages on stack if possible")
Fixes: 4f05687fd703 ("erofs: introduce struct z_erofs_decompress_backend")
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230110074927.41651-1-hsiangkao@linux.alibaba.com
|
|
Effective offset to add to length was being incorrectly calculated,
which resulted in iomap->length being set to 0, triggering a WARN_ON
in iomap_iter_done().
Fix that, and describe it in comments.
This was reported as a crash by syzbot under an issue about a warning
encountered in iomap_iter_done(), but unrelated to erofs.
C reproducer: https://syzkaller.appspot.com/text?tag=ReproC&x=1037a6b2880000
Kernel config: https://syzkaller.appspot.com/text?tag=KernelConfig&x=e2021a61197ebe02
Dashboard link: https://syzkaller.appspot.com/bug?extid=a8e049cd3abd342936b6
Reported-by: syzbot+a8e049cd3abd342936b6@syzkaller.appspotmail.com
Suggested-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Siddh Raman Pant <code@siddh.me>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20221209102151.311049-1-code@siddh.me
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Add the 'HP Engage Flex Mini' device to the force connect list to
enable audio through HDMI.
Signed-off-by: Adrian Chan <adchan@google.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230109210520.16060-1-adchan@google.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The nvme patterns detect all include files starting with nvme, which
also picks up the nvmem subsystem header files. Fix this by using
a more specific pattern.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
[hch: switched to a purely inclusive pattern instead of excluding nvmem*]
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Passthrough commands can always access the entire device, and thus
submitting them on partitions is an privelege escalation.
In hindsight we should have never allowed any passthrough commands on
partitions, but it's probably too late to change that decision now.
Fixes: e4fbcf32c860 ("nvme: identify-namespace without CAP_SYS_ADMIN")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
|
|
To prepare for passing down more information, replace the boolean
vec argument with a more extensible flags one.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
|
|
Open code __nvme_ioctl in the two callers to make future changes that
pass down additional paramters in the ioctl path easier.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
|
|
There are two issues in nvme_pci_enable():
1) If pci_alloc_irq_vectors() fails, device is left enabled. Fix this by
adding a goto disable statement.
2) nvme_pci_configure_admin_queue could return -ENODEV, in this case,
we will need to free IRQ properly. Otherwise the following warning
could be triggered:
[ 5.286752] WARNING: CPU: 0 PID: 33 at kernel/irq/irqdomain.c:253 irq_domain_remove+0x12d/0x140
[ 5.290547] Call Trace:
[ 5.290626] <TASK>
[ 5.290695] msi_remove_device_irq_domain+0xc9/0xf0
[ 5.290843] msi_device_data_release+0x15/0x80
[ 5.290978] release_nodes+0x58/0x90
[ 5.293788] WARNING: CPU: 0 PID: 33 at kernel/irq/msi.c:276 msi_device_data_release+0x76/0x80
[ 5.297573] Call Trace:
[ 5.297651] <TASK>
[ 5.297719] release_nodes+0x58/0x90
[ 5.297831] devres_release_all+0xef/0x140
[ 5.298339] device_unbind_cleanup+0x11/0xc0
[ 5.298479] really_probe+0x296/0x320
Fixes: a6ee7f19ebfd ("nvme-pci: call nvme_pci_configure_admin_queue from nvme_pci_enable")
Co-developed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
This mirrors the quirk added to Apple Silicon controllers in apple.c.
These controllers do not support the Active NS ID List command and
behave identically to the SoC version judging by existing user
reports/syslogs, so will need the same fix. This quirk reverts
back to NVMe 1.0 behavior and disables the broken commands.
Fixes: 811f4de0344d ("nvme: avoid fallback to sequential scan due to transient issues")
Signed-off-by: Hector Martin <marcan@marcan.st>
Tested-by: Orlando Chamberlain <orlandoch.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
