summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-08-19arm64: dts: ls1028a: Add properties node for Display output pixel clockWen He
The LS1028A has a clock domain PXLCLK0 used for the Display output interface in the display core, independent of the system bus frequency, for flexible clock design. This display core has its own pixel clock. This patch enable the pixel clock provider on the LS1028A. Signed-off-by: Wen He <wen.he_1@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-19arm64: dts: lx2160a: Fix incorrect I2C clock dividerChuanhua Han
Lx2160a platform, the i2c input clock is actually platform pll CLK / 16 (this is the hardware connection), other clock divider can not get the correct i2c clock, resulting in the output of SCL pin clock is not accurate. Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Acked-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-19arm64: dts: ls1028a: Fix incorrect I2C clock dividerChuanhua Han
Ls1028a platform, the i2c input clock is actually platform pll CLK / 4 (this is the hardware connection), other clock divider can not get the correct i2c clock, resulting in the output of SCL pin clock is not accurate. Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Acked-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-19arm64: dts: ls1012a: Fix incorrect I2C clock dividerChuanhua Han
Ls1012a platform, the i2c input clock is actually platform pll CLK / 4 (this is the hardware connection), other clock divider can not get the correct i2c clock, resulting in the output of SCL pin clock is not accurate. Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Acked-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-19arm64: dts: ls1088a: Fix incorrect I2C clock dividerChuanhua Han
Ls1088a platform, the i2c input clock is actually platform pll CLK / 8 (this is the hardware connection), other clock divider can not get the correct i2c clock, resulting in the output of SCL pin clock is not accurate. Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Acked-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-19arm64: dts: ls1028a: fix gpio nodesSong Hui
Update the nodes to include little-endian property to be consistent with the hardware. Signed-off-by: Song Hui <hui.song_1@nxp.com> Acked-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-19arm64: dts: ls1028a: Add Thermal Monitor Unit nodeYuantian Tang
The Thermal Monitoring Unit (TMU) monitors and reports the temperature from 2 remote temperature measurement sites located on ls1028a chip. Add TMU dts node to enable this feature. Signed-off-by: Yuantian Tang <andy.tang@nxp.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-19arm64: dts: renesas: r8a77980: Fix IPMMU-VC0 base addressGeert Uytterhoeven
According to the R-Car Gen3 Hardware Manual Errata for Rev 1.50 of Feb 12, 2019, the base address of the IPMMU-VC0 block on R-Car V3H is 0xfe990000. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
2019-08-19arm64: dts: renesas: ebisu, draak: Limit EtherAVB to 100MbpsSimon Horman
* According to the R-Car Gen3 Hardware Manual Errata for Rev 1.00 of August 24, 2018, the TX clock internal delay mode isn't supported on R-Car E3 (r8a77990) and D3 (r8a77995). * TX clock internal delay mode is required for reliable 1Gbps communication using the KSZ9031RNX phy present on the Ebisu and Draak boards. Thus, the E3 based Ebisu and D3 based Draak boards can not reliably use 1Gbps and the speed should be limited to 100Mbps. Based on work by Kazuya Mizuguchi. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-08-19arm64: dts: renesas: hihope-common: Add HDMI audio supportFabrizio Castro
This patch adds support for HDMI audio to the device tree common to the HiHope RZ/G2M and the HiHope RZ/G2N. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-08-19ARM: dts: r8a7779: Use SYSC "always-on" PM Domain for HSCIFGeert Uytterhoeven
Hook up HSCIF serial devices that are part of the CPG/MSTP Clock Domain to the SYSC "always-on" PM Domain, for a more consistent device-power-area description in DT. Cfr. commit 751e29bbb64ad091 ("ARM: dts: r8a7779: Use SYSC "always-on" PM Domain"). Fixes: 055d15a88f66b096 ("ARM: dts: r8a7779: Add HSCIF0/1 device nodes") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
2019-08-19ARM: vf610-zii-cfu1: Add node for switch watchdogAndrey Smirnov
Add I2C child node for switch watchdog present on CFU1. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Cory Tusar <cory.tusar@zii.aero> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Chris Healy <cphealy@gmail.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Tested-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-19ARM: dts: imx6: drop gpmi-nand address and size cellsMarco Felsch
Since commit fe2585e9c29a ("doc: dt: mtd: support partitions in a special 'partitions' subnode") and commit 5cfdedb7b9a0 ("mtd: ofpart: move ofpart partitions to a dedicated dt node") the partitioning should be within a partitions sub-node. Baseboard device trees following that scheme will get a dtc warning due to the predefined #address-cells and #size-cells properties: arch/arm/boot/dts/imx6qdl.dtsi:171.26-189.5: Warning (avoid_unnecessary_addr_size): /soc/gpmi-nand@112000: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property I found no upstream imx6 baseboard using the old partitioning scheme, so we can drop the two properties to avoid such warnings. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-19ARM: dts: imx6: replace simple-bus by simple-mfd for anatopMarco Felsch
Replace it to fix the following DTC warnings: arch/arm/boot/dts/imx6qdl.dtsi:702.19-715.7: Warning (simple_bus_reg): /soc/aips-bus@2000000/anatop@20c8000/regulator-1p1: missing or empty reg/ranges property arch/arm/boot/dts/imx6qdl.dtsi:717.19-730.7: Warning (simple_bus_reg): /soc/aips-bus@2000000/anatop@20c8000/regulator-3p0: missing or empty reg/ranges property arch/arm/boot/dts/imx6qdl.dtsi:732.19-745.7: Warning (simple_bus_reg): /soc/aips-bus@2000000/anatop@20c8000/regulator-2p5: missing or empty reg/ranges property arch/arm/boot/dts/imx6qdl.dtsi:747.32-762.7: Warning (simple_bus_reg): /soc/aips-bus@2000000/anatop@20c8000/regulator-vddcore: missing or empty reg/ranges property arch/arm/boot/dts/imx6qdl.dtsi:764.29-779.7: Warning (simple_bus_reg): /soc/aips-bus@2000000/anatop@20c8000/regulator-vddpu: missing or empty reg/ranges property arch/arm/boot/dts/imx6qdl.dtsi:781.31-796.7: Warning (simple_bus_reg): /soc/aips-bus@2000000/anatop@20c8000/regulator-vddsoc: missing or empty reg/ranges property Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-19ARM: dts: imx6qdl-colibri: add phy to fecPhilippe Schenker
Add the phy-node and mdio bus to the fec-node, represented as is on hardware. This commit includes micrel,led-mode that is set to the default value, prepared for someone who wants to change this. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-19ARM: dts: imx7-colibri: add recovery for I2C for iMX7Oleksandr Suvorov
- add recovery mode for applicable i2c buses for Colibri iMX7 module. Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-19ARM: dts: imx7-colibri: Add sleep pinctrl to ethernetPhilippe Schenker
Add sleep pinmux to the fec so it can properly sleep. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-19ARM: dts: imx7-colibri: prepare module device tree for FlexCANPhilippe Schenker
Prepare FlexCAN use on SODIMM 55/63 178/188. Those SODIMM pins are compatible for CAN bus use with several modules from the Colibri family. Add Better drivestrength and also add flexcan2. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-19ARM: dts: imx7-colibri: disable HS400Stefan Agner
Force HS200 by masking bit 63 of the SDHCI capability register. The i.MX ESDHC driver uses SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400. With that the stack checks bit 63 to descide whether HS400 is available. Using sdhci-caps-mask allows to mask bit 63. The stack then selects HS200 as operating mode. This prevents rare communication errors with minimal effect on performance: sdhci-esdhc-imx 30b60000.usdhc: warning! HS400 strobe DLL status REF not lock! Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-19ARM: dts: imx7-colibri: make sure module supplies are always onMarcel Ziswiler
Prevent regulators from being switched off. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-19ARM: dts: imx7d: cl-som-imx7: add compatible for phyAndré Draszik
While not strictly needed as "ethernet-phy-ieee802.3-c22" is assumed by default if not given explicitly, having the compatible string here makes it more clear what this is and which driver handles this - an Ethernet phy attached to mdio, handled by of_mdio.c Signed-off-by: André Draszik <git@andred.net> CC: Ilya Ledvich <ilya@compulab.co.il> CC: Igor Grinberg <grinberg@compulab.co.il> CC: Rob Herring <robh+dt@kernel.org> CC: Mark Rutland <mark.rutland@arm.com> CC: Shawn Guo <shawnguo@kernel.org> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Pengutronix Kernel Team <kernel@pengutronix.de> CC: Fabio Estevam <festevam@gmail.com> CC: NXP Linux Team <linux-imx@nxp.com> CC: devicetree@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-19ARM: dts: imx7d: cl-som-imx7: make ethernet work againAndré Draszik
Recent changes to the atheros at803x driver caused ethernet to stop working on this board. In particular commit 6d4cd041f0af ("net: phy: at803x: disable delay only for RGMII mode") and commit cd28d1d6e52e ("net: phy: at803x: Disable phy delay for RGMII mode") fix the AR8031 driver to configure the phy's (RX/TX) delays as per the 'phy-mode' in the device tree. This now prevents ethernet from working on this board. It used to work before those commits, because the AR8031 comes out of reset with RX delay enabled, and the at803x driver didn't touch the delay configuration at all when "rgmii" mode was selected, and because arch/arm/mach-imx/mach-imx7d.c:ar8031_phy_fixup() unconditionally enables TX delay. Since above commits ar8031_phy_fixup() also has no effect anymore, and the end-result is that all delays are disabled in the phy, no ethernet. Update the device tree to restore functionality. Signed-off-by: André Draszik <git@andred.net> CC: Ilya Ledvich <ilya@compulab.co.il> CC: Igor Grinberg <grinberg@compulab.co.il> CC: Rob Herring <robh+dt@kernel.org> CC: Mark Rutland <mark.rutland@arm.com> CC: Shawn Guo <shawnguo@kernel.org> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Pengutronix Kernel Team <kernel@pengutronix.de> CC: Fabio Estevam <festevam@gmail.com> CC: NXP Linux Team <linux-imx@nxp.com> CC: devicetree@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-19ARM: dts: imx6ul: Add csi nodeSébastien Szymanski
Add csi node for i.MX6UL SoC. Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-16arm64: dts: qcom: qcs404-evb: Mark WCSS clocks protectedBjorn Andersson
'7d0c76bdf227 ("clk: qcom: Add WCSS gcc clock control for QCS404")' introduces two new clocks to gcc. These are not used before clk_disable_unused() and as such the clock framework tries to disable them. But on the EVB these registers are only accessible through TrustZone, so these clocks must be marked as "protected" to prevent the clock code from touching them. Numerical values are used as the constants are not yet available in a common tree. Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org> Reported-by: Mark Brown <broonie@kernel.org> Reported-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-16ARM: dts: add device tree for Mecer Xtreme Mini S6Justin Swartz
The Mecer Xtreme Mini S6 features a Rockchip RK3229 SoC, 1GB DDR3 RAM, 8GB eMMC, MicroSD port, 10/100Mbps Ethernet, Realtek 8723BS WLAN module, 2 x USB 2.0 ports, HDMI output, and S/PDIF output. Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-08-16arm64: dts: rockchip: Add dts for Leez RK3399 P710 SBCAndy Yan
P710 is a RK3399 based SBC, designed by Leez [0]. Specification - Rockchip RK3399 - 4/2GB LPDDR4 - TF sd scard slot - eMMC - M.2 B-Key for 4G LTE - AP6256 for WiFi + BT - Gigabit ethernet - HDMI out - 40 pin header - USB 2.0 x 2 - USB 3.0 x 1 - USB 3.0 Type-C x 1 - TYPE-C Power supply [0]https://leez.lenovo.com Signed-off-by: Andy Yan <andyshrk@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-08-16arm64: dts: rockchip: enable internal SPI flash for RockPro64.Andrius Štikonas
The rockpro64 contains a nor-flash chip connected to spi1. Signed-off-by: Andrius Štikonas <andrius@stikonas.eu> [a number of cleanups] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-08-16Revert "ARM: dts: rockchip: add startup delay to rk3288-veyron panel-regulators"Douglas Anderson
This reverts commit 1f45e8c6d0161f044d679f242fe7514e2625af4a. This 100 ms mystery delay is not on downstream kernels and no longer seems needed on upstream kernels either [1]. Presumably something in the meantime has made things better. A few possibilities for patches that have landed in the meantime that could have made this better are commit 3157694d8c7f ("pwm-backlight: Add support for PWM delays proprieties."), commit 5fb5caee92ba ("pwm-backlight: Enable/disable the PWM before/after LCD enable toggle."), and commit 6d5922dd0d60 ("ARM: dts: rockchip: set PWM delay backlight settings for Veyron") Let's revert and get our 100 ms back. [1] https://lkml.kernel.org/r/2226970.BAPq4liE1j@diego Signed-off-by: Douglas Anderson <dianders@chromium.org> [rebased on top of the recent veyron display cleanup] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-08-15Merge tag 'tags/bcm2835-dt-next-2019-08-15' into devicetree/nextFlorian Fainelli
This pull request prepares the BCM2835 DTS files for the introduction of the new SoC BCM2711. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2019-08-15ARM: dts: bcm283x: Enable HDMI at board levelStefan Wahren
There might be headless setups of the Compute Module without HDMI, so better enable HDMI at board level. Btw this allows moving HDMI base definition into upcoming bcm2835-common.dtsi. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Eric Anholt <eric@anholt.net>
2019-08-14Merge tag 'vexpress-dt-updates-5.4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/dt ARMv7 Vexpress DTS updates for v5.4 Couple of updates adding missing: SPDX GPL-2.0 license identifier and newline at the end of the file * tag 'vexpress-dt-updates-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: ARM: dts: vexpress: Add missing newline at end of file ARM: dts: vexpress: add missing SPDX GPL-2.0 license identifier Link: https://lore.kernel.org/r/20190814172425.26089-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-14Merge tag 'juno-update-5.4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/dt ARMv8 Juno/FVP update for v5.4 Single patch removing optional 'max-memory-bandwidth' property for CLCD that enables to allocate and use 32bpp buffers(used on FVP for Android development) * tag 'juno-update-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: arm64: dts: fast models: Remove clcd's max-memory-bandwidth Link: https://lore.kernel.org/r/20190814172408.25995-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-14Merge tag 'renesas-arm64-dt-for-v5.4-tag1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM64 DT updates for v5.4 - CAN, BT, and WLAN support for the HiHope RZ/G2[MN] boards, - Sound support for RZ/G2M, - Sort nodes in various SoC and board DTSes, - Small fixes and improvements. * tag 'renesas-arm64-dt-for-v5.4-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (23 commits) arm64: dts: renesas: ulcb: Sort nodes arm64: dts: renesas: ulcb-kf: Sort nodes arm64: dts: renesas: salvator-common: Sort nodes arm64: dts: renesas: r8a7796: salvator-xs: Sort nodes arm64: dts: renesas: r8a7796: salvator-x: Sort nodes arm64: dts: renesas: r8a7795: salvator-xs: Sort nodes arm64: dts: renesas: r8a7795: salvator-x: Sort nodes arm64: dts: renesas: r8a7795-es1: salvator-x: Sort nodes arm64: dts: renesas: r8a77965: Sort nodes arm64: dts: renesas: r8a7795-es1: Sort nodes arm64: dts: renesas: r8a7795: Sort nodes arm64: dts: renesas: r8a774a1: Add SSIU support for sound arm64: dts: renesas: r8a774a1: Use extended audio dmac registers arm64: dts: renesas: hihope-common: Add WLAN support arm64: dts: renesas: hihope-common: Add BT support arm64: dts: renesas: hihope-common: Add PCA9654 I/O expander arm64: dts: renesas: hihope-rzg2-ex: Enable CAN interfaces arm64: dts: renesas: r8a774a1: Add CANFD support arm64: dts: renesas: r8a774a1: Add missing assigned-clocks for CAN[01] arm64: dts: renesas: r8a774c0: Add missing assigned-clocks for CAN[01] ... Link: https://lore.kernel.org/r/20190802120355.1430-2-geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-14ARM: dts: aspeed: Add Mihawk BMC platformBen Pai
The Mihawk BMC is an ASPEED ast2500 based BMC that is part of an OpenPower Power9 server. Signed-off-by: Ben Pai <Ben_Pai@wistron.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-08-14ARM: dts: aspeed: fp5280g2: Fix power supply addressJohn Wang
There are two PSU on i2c11. PSU0's address is 0x58, PSU1's address is `0x59`, not `0x5a`. Signed-off-by: John Wang <wangzqbj@inspur.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-08-13Merge tag 'gemini-dts-v5.4-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt DTS updates for the Gemini platform: - Fix up some pin config confusion - Use redboot partition parsing on the SL93512r - Mount root on mtdblock3 by default * tag 'gemini-dts-v5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: dts: gemini: Mount root from mtdblock3 ARM: dts: gemini: Switch to redboot partition parsing ARM: dts: gemini: Fix up confused pin settings Link: https://lore.kernel.org/r/CACRpkdarsQNfXgXMQKfYwOyiqhKY67gKd3ufQ+wexwO3v=LE5w@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-13Merge tag 'stm32-dt-for-v5.4-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt STM32 DT updates for v5.4, round 1 Highlights: ---------- MPU part: -Add FMC2 NAND controller support on stm32mp157c-ev1. -Add M4 remoteproc support: -Add support in stm32mp157c.dtsi. -Declare copro reserved memories region on stm32mp157 EV1 and DK1 boards. -Enable M4 copro support on stm32mp157 EV1 and DK1. -Add booster for ADC on stm32mp157c. -Add audio codec support on stm32mp157 DK1. MCU part: -Remove fixed regulator unit address on stm32429i-eval used by ADC. -Add missing vdd-supply required by ADC on stm32429i-eval and stm32h743i-eval. -Add pwm cells on f746 and f429. * tag 'stm32-dt-for-v5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (21 commits) ARM: dts: stm32: remove useless pinctrl entries in stm32mp157-pinctrl ARM: dts: stm32: add phy-dsi-supply property on stm32mp157c-ev1 ARM: dts: stm32: add audio codec support on stm32mp157a-dk1 board ARM: dts: stm32: add syscfg to ADC on stm32mp157c ARM: dts: stm32: add pwm cells to stm32f746 ARM: dts: stm32: add pwm cells to stm32f429 ARM: dts: stm32: add pwm cells to stm32mp157c ARM: dts: stm32: fix -Wall W=1 compilation in stm32mp157 pinctrl for mcan ARM: dts: stm32: add booster for ADC analog switches on stm32mp157c ARM: dts: stm32: enable m4 coprocessor support on STM32MP157a-dk1 ARM: dts: stm32: declare copro reserved memories on STM32MP157a-dk1 ARM: dts: stm32: enable m4 coprocessor support on STM32MP157c-ed1 ARM: dts: stm32: declare copro reserved memories on STM32MP157c-ed1 ARM: dts: stm32: add m4 remoteproc support on STM32MP157c ARM: dts: stm32: add missing vdda-supply to adc on stm32h743i-eval ARM: dts: stm32: add missing vdda-supply to adc on stm32429i-eval ARM: dts: stm32: remove fixed regulator unit address on stm32429i-eval ARM: dts: stm32: enable FMC2 NAND controller on stm32mp157c-ev1 ARM: dts: stm32: add FMC2 NAND controller pins muxing on stm32mp157c-ev1 ARM: dts: stm32: add FMC2 NAND controller support on stm32mp157c ... Link: https://lore.kernel.org/r/482a2a40-a246-6654-7e3b-8e38b137752f@st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-13Merge tag 'renesas-dt-bindings-for-v5.4-tag1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas DT binding updates for v5.4 - RZ/G2 updates for the R-Car CAN and CANFD DT bindings. * tag 'renesas-dt-bindings-for-v5.4-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: dt-bindings: can: rcar_can: Complete documentation for RZ/G2[EM] dt-bindings: can: rcar_canfd: document r8a774a1 support Link: https://lore.kernel.org/r/20190802120355.1430-4-geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-13Merge tag 'ux500-dts-v5.4-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into arm/dt This are some DTS changes for the Ux500 for the v5.4 kernel cycle: - Update the CoreSight blocks to use the latest and greatest bindings - Push the thermal driver config down to the main SoC DTSI as it applies to all ASICs. - Set a pull-up on the ST UIB right. * tag 'ux500-dts-v5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ARM: dts: ux500: set pull-up on STUIB STMPE IRQ line ARM: dts: ux500: Fix up the thermal nodes ARM: dts: ste: Update coresight DT bindings Link: https://lore.kernel.org/r/CACRpkdbKX7a15SC-zwxmH_ygGzOKrn0h-pzzm22UpRcLRfRVNA@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-13ARM: dts: Update the NSPIRE DTS files for DRMLinus Walleij
The DRM subsystem graphics drivers require more granular definition of the connection between display drivers and panels, and a proper panel compatible. This utilizes the bindings merged to the DRM subsystem to properly define the display on the NSPIRE devices. We also do away with the undocumented DT binding "lcd-type". We add both the clocks to the CLCD block so the driver have full control over its clocking. Link: https://lore.kernel.org/r/20190810074230.6492-1-linus.walleij@linaro.org Cc: Daniel Tang <dt.tangr@gmail.com> Cc: Fabian Vogt <fabian@ritter-vogt.de> Tested-by: Fabian Vogt <fabian@ritter-vogt.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-13ARM: dts: nomadik: Set up the CS GPIO rightLinus Walleij
Now that the SPI GPIO driver knows how to handle these chip select GPIOs and we get nasty messages about the core having to enforce active low on the GPIO, fix this up by actually requesting the CS GPIO line as active low. Link: https://lore.kernel.org/r/20190813072731.4558-1-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-13ARM: dts: am335x-boneblue: Use of am335x-osd335x-common.dtsiDavid Lechner
This makes use of the am335x-osd335x-common.dtsi file that contains the common device tree components for Octavo Systems AM335x System-in- Package that is used on the BeagleBone Blue. This has two minor side-effects: 1. pinmux_i2c0_pins is renamed to pinmux-i2c0-pins 2. the 1000MHz cpufreq operating point is enabled Cc: Robert Nelson <robertcnelson@gmail.com> Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-13ARM: dts: gta04: define chosen/stdout-pathH. Nikolaus Schaller
This allows to remove the console= entry in the kernel command line. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-13ARM: dts: omap3-n950-n9: Remove regulator-boot-off propertyEzequiel Garcia
This property was never supported upstream. Get rid of it. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-13ARM: dts: am335x-cm-t335: Remove regulator-boot-off propertyEzequiel Garcia
This property was never supported upstream. Get rid of it. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-12dt-bindings: add vendor prefix "acme" for "Acme Systems srl"Uwe Kleine-König
Add prefix for Acme Systems srl https://www.acmesystems.it Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Link: https://lore.kernel.org/r/20190728210403.2730-2-uwe@kleine-koenig.org Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-12ARM: dts: bcm283x: Define memory at board levelStefan Wahren
Now with the varity of several RPi boards, the memory should be defined at board level. This step gives us the chance to fix the memory size of the RPi 1 B+, Zero (incl. W) and Compute Module 1. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Acked-by: Eric Anholt <eric@anholt.net>
2019-08-12ARM: dts: bcm283x: Define MMC interfaces at board levelStefan Wahren
Starting with RPi 4 this is the first board, which doesn't use sdhost as default SD interface. So the MMC interfaces should be defined finally at board level. Since all boards using sdhci already does this, we can drop the pinctrl part from bcm2835-rpi.dtsi. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Acked-by: Eric Anholt <eric@anholt.net>
2019-08-12ARM: dts: meson8b: odroidc1: use the MAC address stored in the eFuseMartin Blumenstingl
Odroid-C1 uses the MAC address stored in eFuse at offset 0x1b4 (which is defined as a "standard" offset for all Meson8 and Meson8b boards, but testing shows that MXQ doesn't have the eFuse values programmed and EC-100 stores it's MAC address in eMMC). Add the nvmem cell which points to the MAC address and asssign it to the Ethernet controller as "mac-address". As result of this the MAC address which is stored in the eFuse is now assigned to the Ethernet controller and consistent across reboots. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-12arm64: dts: meson-g12b-odroid-n2: enable DVFSNeil Armstrong
Enable DVFS for the Odroid-N2 by setting the clock, OPP and supply for each cores of each CPU clusters. The first cluster uses the "VDDCPU_B" power supply, and the second cluster uses the "VDDCPU_A" power supply. Each power supply can achieve 0.73V to 1.01V using 2 distinct PWM outputs clocked at 800KHz with an inverse duty-cycle. DVFS has been tested by running the arm64 cpuburn at [1] and cycling between all the possible cpufreq translations of each cluster and checking the final frequency using the clock-measurer, script at [2]. [1] https://github.com/ssvb/cpuburn-arm/blob/master/cpuburn-a53.S [2] https://gist.github.com/superna9999/d4de964dbc0f84b7d527e1df2ddea25f Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
generated by cgit (git 2.34.1) at 2025-09-13 04:31:19 +0000