summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-08-28IB/ucma: Fix theoretical user triggered use-after-freeJason Gunthorpe
Something like this: CPU A CPU B Acked-by: Sean Hefty <sean.hefty@intel.com> ======================== ================================ ucma_destroy_id() wait_for_completion() .. anything ucma_put_ctx() complete() .. continues ... ucma_leave_multicast() mutex_lock(mut) atomic_inc(ctx->ref) mutex_unlock(mut) ucma_free_ctx() ucma_cleanup_multicast() mutex_lock(mut) kfree(mc) rdma_leave_multicast(mc->ctx->cm_id,.. Fix it by latching the ref at 0. Once it goes to 0 mc and ctx cannot leave the mutex(mut) protection. The other atomic_inc in ucma_get_ctx is OK because mutex(mut) protects it from racing with ucma_destroy_id. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Acked-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-28iw_cxgb4: set the default MPA version to 2Hariprasad S
This enables ORD/IRD negotiation and its about time to enable it by default Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-28RDMA/iser: Limit sgs to the device fastreg depthSteve Wise
Currently the sg tablesize, which dictates fast register page list depth to use, does not take into account the limits of the rdma device. So adjust it once we discover the device fastreg max depth limit. Also adjust the max_sectors based on the resulting sg tablesize. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-28IB/mlx5: Remove dead code from alloc_cached_mr()Roland Dreier
The only place that assigns mr inside the loop already does a break. So "if (mr)" will never be true here since the function initializes mr to NULL at the top. We can just drop the extra if and break here. Signed-off-by: Roland Dreier <roland@purestorage.com> Acked-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-28IB/qib: Change lkey table allocation to support more MRsMike Marciniszyn
The lkey table is allocated with with a get_user_pages() with an order based on a number of index bits from a module parameter. The underlying kernel code cannot allocate that many contiguous pages. There is no reason the underlying memory needs to be physically contiguous. This patch: - switches the allocation/deallocation to vmalloc/vfree - caps the number of bits to 23 to insure at least 1 generation bit o this matches the module parameter description Cc: stable@vger.kernel.org Reviewed-by: Vinit Agnihotri <vinit.abhay.agnihotri@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-28mlx5: Expose correct page_size_cap in device attributesSagi Grimberg
Should be all the page sizes that are supported by the device. Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-28mlx5: Fix missing device local_dma_lkeySagi Grimberg
The mlx5 driver exposes device capability IB_DEVICE_LOCAL_DMA_LKEY but does not set the the device local_dma_lkey. This breaks rpcrdma drivers. Query and set this lkey when creating the device resources. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-28Input: max8997_haptic - fix module aliasJavier Martinez Canillas
The driver is a platform driver and not a I2C driver so its modalias should be exported with MODULE_DEVICE_TABLE(platform,...) instead of MODULE_DEVICE_TABLE(i2c,...). Also, remove the unnecessary MODULE_ALIAS("platform:max8997-haptic") now that the correct module alias is created. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-08-28Input: elan_i2c - fix typos for validpage_countBenson Leung
Search for "vaildpage_count" and replace with "validpage_count". Signed-off-by: Benson Leung <bleung@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-08-29PM / Domains: Fix typo in description of genpd_dev_pm_detach()Jon Hunter
The function genpd_dev_pm_detach() detaches a device from a PM domain, however, in the description, the "dev" argument for the function is described as the device to "attach" instead of "detach". Correct this. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-29PM / Domains: Remove unusable governor dummiesGeert Uytterhoeven
The governor dummies for the !CONFIG_PM_GENERIC_DOMAINS case are unusable, as a governors is always referred to by taking its address, which you can't do with a literal NULL pointer. I.e. pm_genpd_init(genpd, &simple_qos_governor, false); fails to compile with: error: lvalue required as unary '&' operand Hence just remove the governor dummies. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-29PM / Domains: Make pm_genpd_init() available to modulesRajendra Nayak
Export symbol pm_genpd_init so it can be used in loadable kernel modules Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-29PM / domains: Align column headers and data in pm_genpd_summary outputGeert Uytterhoeven
"domain": header is indented by 4, data by 0 spaces => 0 spaces "/device": header is indented by 11, data by 4 spaces => 4 spaces "slaves": header is indented by 47, data by 49 spaces => 48 spaces Ruler: 1234567890123456789012345678901234567890123456789012345678901234567890 Before: domain status slaves /device runtime status ---------------------------------------------------------------------- a3sp on a2us /devices/platform/e60b0000.i2c suspended After: domain status slaves /device runtime status ---------------------------------------------------------------------- a3sp on a2us /devices/platform/e60b0000.i2c suspended Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-29powercap / RAPL: disable the 2nd power limit properlySeiichi Ikarashi
Let rapl_unregister_powercap() disable the second power limit only if it exists. Intel64 SDM Vol.3 14.9 says that the package domain has it but neither the power plane domain nor the DRAM domain has it. Signed-off-by: Seiichi Ikarashi <s.ikarashi@jp.fujitsu.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-29tools: cpupower: Fix error when running cpupower monitorShreyas B. Prabhu
get_cpu_topology() tries to get topology info from all cpus by reading files in the topology sysfs dir. If a cpu is offlined, since it doesn't have topology dir, this function fails and returns -1. This causes functions relying on get_cpu_topology() to fail. For example- $ cpupower monitor Cannot read number of available processors Fix this by skipping fetching topology info for offline cpus. Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com> Reported-by: Pavaman Subramaniyam <pavsubra@linux.vnet.ibm.com> Acked-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter/IPVS updates for your net-next tree. In sum, patches to address fallout from the previous round plus updates from the IPVS folks via Simon Horman, they are: 1) Add a new scheduler to IPVS: The weighted overflow scheduling algorithm directs network connections to the server with the highest weight that is currently available and overflows to the next when active connections exceed the node's weight. From Raducu Deaconu. 2) Fix locking ordering in IPVS, always take rtnl_lock in first place. Patch from Julian Anastasov. 3) Allow to indicate the MTU to the IPVS in-kernel state sync daemon. From Julian Anastasov. 4) Enhance multicast configuration for the IPVS state sync daemon. Also from Julian. 5) Resolve sparse warnings in the nf_dup modules. 6) Fix a linking problem when CONFIG_NF_DUP_IPV6 is not set. 7) Add ICMP codes 5 and 6 to IPv6 REJECT target, they are more informative subsets of code 1. From Andreas Herz. 8) Revert the jumpstack size calculation from mark_source_chains due to chain depth miscalculations, from Florian Westphal. 9) Calm down more sparse warning around the Netfilter tree, again from Florian Westphal. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28Merge branch 'bpf_trace_printk-percent-s'David S. Miller
Alexei Starovoitov says: ==================== support for '%s' in bpf_trace_printk v2->v3: fix the comment to mention that strncpy_from_unsafe() returns the length of the string including the trailing NUL. v1->v2: patch 1: generalize FETCH_FUNC_NAME(memory, string) into strncpy_from_unsafe() patch 2: use it in bpf_trace_printk ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28bpf: add support for %s specifier to bpf_trace_printk()Alexei Starovoitov
%s specifier makes bpf program and kernel debugging easier. To make sure that trace_printk won't crash the unsafe string is copied into stack and unsafe pointer is substituted. The following C program: #include <linux/fs.h> int foo(struct pt_regs *ctx, struct filename *filename) { void *name = 0; bpf_probe_read(&name, sizeof(name), &filename->name); bpf_trace_printk("executed %s\n", name); return 0; } when attached to kprobe do_execve() will produce output in /sys/kernel/debug/tracing/trace_pipe : make-13492 [002] d..1 3250.997277: : executed /bin/sh sh-13493 [004] d..1 3250.998716: : executed /usr/bin/gcc gcc-13494 [002] d..1 3250.999822: : executed /usr/lib/gcc/x86_64-linux-gnu/4.7/cc1 gcc-13495 [002] d..1 3251.006731: : executed /usr/bin/as gcc-13496 [002] d..1 3251.011831: : executed /usr/lib/gcc/x86_64-linux-gnu/4.7/collect2 collect2-13497 [000] d..1 3251.012941: : executed /usr/bin/ld Suggested-by: Brendan Gregg <brendan.d.gregg@gmail.com> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28lib: introduce strncpy_from_unsafe()Alexei Starovoitov
generalize FETCH_FUNC_NAME(memory, string) into strncpy_from_unsafe() and fix sparse warnings that were present in original implementation. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28netpoll: warn on netpoll_send_udp users who haven't disabled irqsNikolay Aleksandrov
Make sure we catch future netpoll_send_udp users who use it without disabling irqs and also as a hint for poll_controller users. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-29netfilter: nfnetlink: work around wrong endianess in res_id fieldPablo Neira Ayuso
The convention in nfnetlink is to use network byte order in every header field as well as in the attribute payload. The initial version of the batching infrastructure assumes that res_id comes in host byte order though. The only client of the batching infrastructure is nf_tables, so let's add a workaround to address this inconsistency. We currently have 11 nfnetlink subsystems according to NFNL_SUBSYS_COUNT, so we can assume that the subsystem 2560, ie. htons(10), will not be allocated anytime soon, so it can be an alias of nf_tables from the nfnetlink batching path when interpreting the res_id field. Based on original patch from Florian Westphal. Reported-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-08-29netfilter: ipset: Fixing unnamed union initElad Raz
In continue to proposed Vinson Lee's post [1], this patch fixes compilation issues founded at gcc 4.4.7. The initialization of .cidr field of unnamed unions causes compilation error in gcc 4.4.x. References Visible links [1] https://lkml.org/lkml/2015/7/5/74 Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-08-28Merge branch 'phylib-simplifications'David S. Miller
Sergei Shtylyov says: ==================== Some phylib simplifications Here's 2 patches against DaveM's 'net-next.git' repo. We simplify a bogus string of type casts in the 1st patch and make the code respect some coding standards of the networking code in the 2nd one. I may follow with fixing of checkpatch.pl's complaints. if I have time.. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28phylib: simplify NULL checksSergei Shtylyov
Fix scripts/checkpatch.pl's messages like: CHECK: Comparison to NULL could be written "!phydrv->read_mmd_indirect" BTW, it doesn't detect the reversed comparisons (which I've fixed as well). Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28phylib: simplify bogus phy_device_create() resultSergei Shtylyov
Get rid of the bogus string of type casts where ERR_PTR() is enough. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28net: sched: don't break line in tc_classify loop notificationDaniel Borkmann
Just some minor noise follow-up to address some stylistic issues of commit 3b3ae880266d ("net: sched: consolidate tc_classify{,_compat}"). Accidentally v1 instead of v2 of that commit got applied, so this patch adds the relative diff. Suggested-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28sfc: Allow driver to cope with a lower number of VIs than it needs for RSSShradha Shah
Previously, the driver would refuse to load if it couldn't secure enough VIs from the MC to fulfill its RSS requirements. This was causing probe to fail on later functions in configurations where we'd run out of VIs, such as having many VFs. This change allows the driver to load with fewer VIs, down to a minimum of 2. A warning will be printed saying that RSS requirements were not met, possibly affecting performance. efx->max_tx_channels needs to be set to avoid going down the failure path in efx_probe_nic() immediately in the loop after the probe() NIC-type function. Also, Set rc=ENOSPC when bombing out of efx_probe_nic due to lack of VIs. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28Merge branches 'pci/enumeration' and 'pci/misc' into nextBjorn Helgaas
* pci/enumeration: PCI: Set MPS to match upstream bridge PCI: Move MPS configuration check to pci_configure_device() PCI: Drop references acquired by of_parse_phandle() PCI/MSI: Remove unused pcibios_msi_controller() hook ARM/PCI: Remove msi_controller from struct pci_sys_data ARM/PCI, designware, xilinx: Use pci_scan_root_bus_msi() PCI: Add pci_scan_root_bus_msi() ARM/PCI: Replace panic with WARN messages on failures PCI: generic: Add arm64 support PCI: Build setup-irq.o for arm64 PCI: generic: Remove dependency on ARM-specific struct hw_pci ARM/PCI: Set MPS before pci_bus_add_devices() * pci/misc: PCI: Disable async suspend/resume for JMicron multi-function SATA/AHCI
2015-08-28cxgb4: Force uninitialized state if FW in adapter is unsupportedHariprasad Shenai
Forcing uninitialized state allows us to upgrade and reinitialize the adapter. FW_VERSION_T4 = 1.4.0.0 FW_VERSION_T5 = 0.0.0.0 FW_VERSION_T6 = 0.0.0.0 At this point driver supports above and greater than above version. If FW in adapter < min FW_VERSION driver supports tries to upgrade the FW If FW in adapter >= FW_VERSION driver supports then it follows normal path Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-mergeDavid S. Miller
Antonio Quartulli says: ==================== Included changes: - code beautification - remove obsolete 'deleted' attribute for bat-gw node - increase internal version number - prevent potential access to netdev object after deregistration - set needed_head/tail_room for batman virtual interface ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28openswitch: fix typo CONFIG_NF_CONNTRACK_LABELValentin Rothberg
Fix typo in conntrack.c s/CONFIG_NF_CONNTRACK_LABEL/CONFIG_NF_CONNTRACK_LABELS/ Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28Merge branch 'vrf-inetpeer'David S. Miller
David Ahern says: ==================== net: Refactor inetpeer cache and add support for VRFs Per Dave's comment on the version 1 patch adding VRF support to inetpeer cache by explicitly making the address + index a key. Refactored the inetpeer code in the process; mostly impacts the use by tcp_metrics. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28net: Add support for VRFs to inetpeer cacheDavid Ahern
inetpeer caches based on address only, so duplicate IP addresses within a namespace return the same cached entry. Enhance the ipv4 address key to contain both the IPv4 address and VRF device index. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28net: Refactor inetpeer address structDavid Ahern
Move the inetpeer_addr_base union to inetpeer_addr and drop inetpeer_addr_base. Both the a6 and in6_addr overlays are not needed; drop the __be32 version and rename in6 to a6 for consistency with ipv4. Add a new u32 array to the union which removes the need for the typecast in the compare function and the use of a consistent arg for both ipv4 and ipv6 addresses which makes the compare function more readable. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28net: Add helper function to compare inetpeer addressesDavid Ahern
tcp_metrics and inetpeer both have functions to compare inetpeer addresses. Consolidate into 1 version. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28net: Add set,get helpers for inetpeer addressesDavid Ahern
Use inetpeer set,get helpers in tcp_metrics rather than peeking into the inetpeer_addr struct. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28net: Introduce ipv4_addr_hash and use it for tcp metricsDavid Ahern
Refactors a common line into helper function. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28net: Add ethernet header for pass through VRF deviceDavid Ahern
The change to use a custom dst broke tcpdump captures on the VRF device: $ tcpdump -n -i vrf10 ... 05:32:29.009362 IP 10.2.1.254 > 10.2.1.2: ICMP echo request, id 21989, seq 1, length 64 05:32:29.009855 00:00:40:01:8d:36 > 45:00:00:54:d6:6f, ethertype Unknown (0x0a02), length 84: 0x0000: 0102 0a02 01fe 0000 9181 55e5 0001 bd11 ..........U..... 0x0010: da55 0000 0000 bb5d 0700 0000 0000 1011 .U.....]........ 0x0020: 1213 1415 1617 1819 1a1b 1c1d 1e1f 2021 ...............! 0x0030: 2223 2425 2627 2829 2a2b 2c2d 2e2f 3031 "#$%&'()*+,-./01 0x0040: 3233 3435 3637 234567 Local packets going through the VRF device are missing an ethernet header. Fix by adding one and then stripping it off before pushing back to the IP stack. With this patch you get the expected dumps: ... 05:36:15.713944 IP 10.2.1.254 > 10.2.1.2: ICMP echo request, id 23795, seq 1, length 64 05:36:15.714160 IP 10.2.1.2 > 10.2.1.254: ICMP echo reply, id 23795, seq 1, length 64 ... Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28net/xen-netfront: only napi_synchronize() if runningChas Williams
If an interface isn't running napi_synchronize() will hang forever. [ 392.248403] rmmod R running task 0 359 343 0x00000000 [ 392.257671] ffff88003760fc88 ffff880037193b40 ffff880037193160 ffff88003760fc88 [ 392.267644] ffff880037610000 ffff88003760fcd8 0000000100014c22 ffffffff81f75c40 [ 392.277524] 0000000000bc7010 ffff88003760fca8 ffffffff81796927 ffffffff81f75c40 [ 392.287323] Call Trace: [ 392.291599] [<ffffffff81796927>] schedule+0x37/0x90 [ 392.298553] [<ffffffff8179985b>] schedule_timeout+0x14b/0x280 [ 392.306421] [<ffffffff810f91b9>] ? irq_free_descs+0x69/0x80 [ 392.314006] [<ffffffff811084d0>] ? internal_add_timer+0xb0/0xb0 [ 392.322125] [<ffffffff81109d07>] msleep+0x37/0x50 [ 392.329037] [<ffffffffa00ec79a>] xennet_disconnect_backend.isra.24+0xda/0x390 [xen_netfront] [ 392.339658] [<ffffffffa00ecadc>] xennet_remove+0x2c/0x80 [xen_netfront] [ 392.348516] [<ffffffff81481c69>] xenbus_dev_remove+0x59/0xc0 [ 392.356257] [<ffffffff814e7217>] __device_release_driver+0x87/0x120 [ 392.364645] [<ffffffff814e7cf8>] driver_detach+0xb8/0xc0 [ 392.371989] [<ffffffff814e6e69>] bus_remove_driver+0x59/0xe0 [ 392.379883] [<ffffffff814e84f0>] driver_unregister+0x30/0x70 [ 392.387495] [<ffffffff814814b2>] xenbus_unregister_driver+0x12/0x20 [ 392.395908] [<ffffffffa00ed89b>] netif_exit+0x10/0x775 [xen_netfront] [ 392.404877] [<ffffffff81124e08>] SyS_delete_module+0x1d8/0x230 [ 392.412804] [<ffffffff8179a8ee>] system_call_fastpath+0x12/0x71 Signed-off-by: Chas Williams <3chas3@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28IGMP: Inhibit reports for local multicast groupsPhilip Downey
The range of addresses between 224.0.0.0 and 224.0.0.255 inclusive, is reserved for the use of routing protocols and other low-level topology discovery or maintenance protocols, such as gateway discovery and group membership reporting. Multicast routers should not forward any multicast datagram with destination addresses in this range, regardless of its TTL. Currently, IGMP reports are generated for this reserved range of addresses even though a router will ignore this information since it has no purpose. However, the presence of reserved group addresses in an IGMP membership report uses up network bandwidth and can also obscure addresses of interest when inspecting membership reports using packet inspection or debug messages. Although the RFCs for the various version of IGMP (e.g.RFC 3376 for v3) do not specify that the reserved addresses be excluded from membership reports, it should do no harm in doing so. In particular there should be no adverse effect in any IGMP snooping functionality since 224.0.0.x is specifically excluded as per RFC 4541 (IGMP and MLD Snooping Switches Considerations) section 2.1.2. Data Forwarding Rules: 2) Packets with a destination IP (DIP) address in the 224.0.0.X range which are not IGMP must be forwarded on all ports. IGMP reports for local multicast groups can now be optionally inhibited by means of a system control variable (by setting the value to zero) e.g.: echo 0 > /proc/sys/net/ipv4/igmp_link_local_mcast_reports To retain backwards compatibility the previous behaviour is retained by default on system boot or reverted by setting the value back to non-zero e.g.: echo 1 > /proc/sys/net/ipv4/igmp_link_local_mcast_reports Signed-off-by: Philip Downey <pdowney@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28r8169: Add software counter for multicast packagesCorinna Vinschen
The multicast hardware counter on 8168/8111 chips is only 32 bit while the statistics in struct rtnl_link_stats64 are 64 bit. Given that statistics are requested on an irregular basis, an overflow of the hardware counter can go unnoticed. To count even very large numbers of multicast packets reliably, add a software counter and remove previously applied code to fill the multicast field requested by @rtl8169_get_stats64 with the values read from the rx_multicast hardware counter. Signed-off-by: Corinna Vinschen <vinschen@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28scsi_dh: return SCSI_DH_NOTCONN in scsi_dh_activate()Hannes Reinecke
When calling scsi_dh_activate() we should be returning SCSI_DH_NOTCONN if the device handler couldn't be attached. Reviewed-by: Bart van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-28scsi_dh: don't allow to detach device handlers at runtimeChristoph Hellwig
The I/O submission and completion paths call into the device handler without any synchronization agains detachment. So disallow detaching device handlers at runtime. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-28scsi_dh: add a common helper to get a scsi_device from a request_queueChristoph Hellwig
And cleanup the various messy opencoded versions of this. Note that this moves the sdev_state checks outside the queue_lock coverage, but as we don't hold the lock over the activation they are only advisory anyway. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-28scsi_dh: kill struct scsi_dh_dataChristoph Hellwig
Add a ->handler and a ->handler_data field to struct scsi_device and kill this indirection. Also move struct scsi_device_handler to scsi_dh.h so that changes to it don't require rebuilding every SCSI LLDD. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-28scsi_dh: move device matching to the core codeChristoph Hellwig
Add a single list of devices that need non-ALUA device handlers to the core scsi_dh code so that we can autoload the modules for them at probe time. While this is a little ugly in terms of architecture it actually significantly simplifies the code in addition to the new autoloading functionality. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-28scsi_dh: integrate into the core SCSI codeChristoph Hellwig
Stop building scsi_dh as a separate module and integrate it fully into the core SCSI code with explicit callouts at bus scan time. For now the callouts are placed at the same point as the old bus notifiers were called, but in the future we will be able to look at ALUA INQUIRY data earlier on. Note that this also means that the device handler modules need to be loaded by the time we scan the bus. The next patches will add support for autoloading device handlers at bus scan time to make sure they are always loaded if they are enabled in the kernel config. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-28scsi_dh: move to drivers/scsiChristoph Hellwig
Prepare for building scsi_dh.c into the core SCSI module by moving it to drivers/scsi. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-28dm-mpath, scsi_dh: request scsi_dh modules in scsi_dh, not dm-mpathChristoph Hellwig
This way we can reused the same code any attachment method, not just those requested from dm-mpath. [jejb: fixup checkpatch error] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-28dm-mpath, scsi_dh: don't let dm detach device handlersChristoph Hellwig
While allowing dm-mpath to attach device handlers is a functionality we need for backwards compatibility reason there is no reason to reference count them and detach them if dm-mpath stops using the device for some reason. If the device handler works for the given device it can just stay attached, and we can take the retain_hw_handler codepath. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Hannes Reinecke <hare@Suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
generated by cgit (git 2.34.1) at 2025-09-21 19:57:53 +0000