summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-03-02drm/ast: Fix incorrect register check for DRAM widthTimothy Pearson
During DRAM initialization on certain ASpeed devices, an incorrect bit (bit 10) was checked in the "SDRAM Bus Width Status" register to determine DRAM width. Query bit 6 instead in accordance with the Aspeed AST2050 datasheet v1.05. Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-03-02ARM: dts: porter: remove enable prop from HS-USB device nodeSergei Shtylyov
In the final versions of the Porter board (called "PORTER_C") Renesas decided to get rid of the Maxim Integrated MAX3355 OTG chip and didn't add any other provision to differ the host/gadget mode, so we'll have to remove no longer valid "renesas,enable-gpio" property from the HS-USB device node. Hopefully, the earlier revisions of the board were never seen in the wild... Fixes: c794f6a09a25 ("ARM: shmobile: porter: add HS-USB DT support") Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-03-01Merge tag 'usb-ci-v4.5-rc7' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-linus Peter writes: One bug-fix using ID wakeup, this bug is existed once this driver has written.
2016-03-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull d_inode/d_flags race fix from Al Viro. I love this fix. Not only does it fix the race in the dentry type handling, it entirely gets rid of the nasty and subtle memory ordering rules for d_type and d_inode, and replaces them with the basic dentry locking rules (sequence numbers under RCU, d_lock elsewhere). * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: use ->d_seq to get coherency between ->d_inode and ->d_flags
2016-03-01of_mdio: fix kernel-doc for of_phy_connect()Sergei Shtylyov
The 'flags' parameter of the of_phy_connect() function wasn't described in the kernel-doc comment... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-01sctp: sctp_remaddr_seq_show use the wrong variable to dump transport infoXin Long
Now in sctp_remaddr_seq_show(), we use variable *tsp to get the param *v. but *tsp is also used to traversal transport_addr_list, which will cover the previous value, and make sctp_transport_put work on the wrong transport. So fix it by adding a new variable to get the param *v. Fixes: fba4c330c5b9 ("sctp: hold transport before we access t->asoc in sctp proc") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-01sctp: lack the check for ports in sctp_v6_cmp_addrXin Long
As the member .cmp_addr of sctp_af_inet6, sctp_v6_cmp_addr should also check the port of addresses, just like sctp_v4_cmp_addr, cause it's invoked by sctp_cmp_addr_exact(). Now sctp_v6_cmp_addr just check the port when two addresses have different family, and lack the port check for two ipv6 addresses. that will make sctp_hash_cmp() cannot work well. so fix it by adding ports comparison in sctp_v6_cmp_addr(). Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-01parisc: Wire up copy_file_range syscallHelge Deller
Signed-off-by: Helge Deller <deller@gmx.de>
2016-03-01parisc: Fix ptrace syscall number and return value modificationHelge Deller
Mike Frysinger reported that his ptrace testcase showed strange behaviour on parisc: It was not possible to avoid a syscall and the return value of a syscall couldn't be changed. To modify a syscall number, we were missing to save the new syscall number to gr20 which is then picked up later in assembly again. The effect that the return value couldn't be changed is a side-effect of another bug in the assembly code. When a process is ptraced, userspace expects each syscall to report entrance and exit of a syscall. If a syscall number was given which doesn't exist, we jumped to the normal syscall exit code instead of informing userspace that the (non-existant) syscall exits. This unexpected behaviour confuses userspace and thus the bug was misinterpreted as if we can't change the return value. This patch fixes both problems and was tested on 64bit kernel with 32bit userspace. Signed-off-by: Helge Deller <deller@gmx.de> Cc: Mike Frysinger <vapier@gentoo.org> Cc: stable@vger.kernel.org # v4.0+ Tested-by: Mike Frysinger <vapier@gentoo.org>
2016-03-01Merge branch 'phy-micrel-fixes'David S. Miller
Alexandre Belloni says: ==================== phy: micrel: fix issues with interrupt on atmel boards Since the phy is not polled anymore, there were issues getting a link on the sama5d* xplained boards. I'm not too sure about were those fixes should go and I'm wondering whether the first one shoud be made generic. For the second one, I found the PHY_HAS_MAGICANEG flag that is not used and I wondering whether this is related to that kind of issue. I had a quick look at the history and could'nt find its use. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-01phy: micrel: Disable auto negotiation on startupAlexandre Belloni
Disable auto negotiation on init to properly detect an already plugged cable at boot. At boot, when the phy is started, it is in the PHY_UP state. However, if a cable is plugged at boot, because auto negociation is already enabled at the time we get the first interrupt, the phy is already running. But the state machine then switches from PHY_UP to PHY_AN and calls phy_start_aneg(). phy_start_aneg() will not do anything because aneg is already enabled on the phy. It will then wait for a interrupt before going further. This interrupt will never happen unless the cable is unplugged and then replugged. It was working properly before 321beec5047a (net: phy: Use interrupts when available in NOLINK state) because switching to NOLINK meant starting polling the phy, even if IRQ were enabled. Fixes: 321beec5047a (net: phy: Use interrupts when available in NOLINK state) Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-01phy: micrel: Ensure interrupts are reenabled on resumeAlexandre Belloni
At least on ksz8081, when getting back from power down, interrupts are disabled. ensure they are reenabled if they were previously enabled. This fixes resuming which is failing on the xplained boards from atmel since 321beec5047a (net: phy: Use interrupts when available in NOLINK state) Fixes: 321beec5047a (net: phy: Use interrupts when available in NOLINK state) Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-01parisc: Use parentheses around expression in floppy.hHelge Deller
David Binderman reported a style issue in the floppy.h header file: arch/parisc/include/asm/floppy.h:221: (style) Boolean result is used in bitwise operation. Clarify expression with parentheses. Reported-by: David Binderman <dcb314@hotmail.com> Cc: David Binderman <dcb314@hotmail.com> Signed-off-by: Helge Deller <deller@gmx.de>
2016-03-01ppp: lock ppp->flags in ppp_read() and ppp_poll()Guillaume Nault
ppp_read() and ppp_poll() can be called concurrently with ppp_ioctl(). In this case, ppp_ioctl() might call ppp_ccp_closed(), which may update ppp->flags while ppp_read() or ppp_poll() is reading it. The update done by ppp_ccp_closed() isn't atomic due to the bit mask operation ('ppp->flags &= ~(SC_CCP_OPEN | SC_CCP_UP)'), so concurrent readers might get transient values. Reading incorrect ppp->flags may disturb the 'ppp->flags & SC_LOOP_TRAFFIC' test in ppp_read() and ppp_poll(), which in turn can lead to improper decision on whether the PPP unit file is ready for reading or not. Since ppp_ccp_closed() is protected by the Rx and Tx locks (with ppp_lock()), taking the Rx lock is enough for ppp_read() and ppp_poll() to guarantee that ppp_ccp_closed() won't update ppp->flags concurrently. The same reasoning applies to ppp->n_channels. The 'n_channels' field can also be written to concurrently by ppp_ioctl() (through ppp_connect_channel() or ppp_disconnect_channel()). These writes aren't atomic (simple increment/decrement), but are protected by both the Rx and Tx locks (like in the ppp->flags case). So holding the Rx lock before reading ppp->n_channels also prevents concurrent writes. Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-01bna: fix list corruptionIvan Vecera
Use list_move_tail() to move MAC address entry from list of pending to list of active entries. Simple list_add_tail() leaves the entry also in the first list, this leads to list corruption. Cc: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Acked-by: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-01Merge tag 'linux-can-fixes-for-4.5-20160226' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2016-02-26 this is a pull request of one patch for net. The patch by Maximilain Schneider fixes a kfree() problem during disconnect in the gs_usb driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-01ALSA: seq: oss: Don't drain at closing a clientTakashi Iwai
The OSS sequencer client tries to drain the pending events at releasing. Unfortunately, as spotted by syzkaller fuzzer, this may lead to an unkillable process state when the event has been queued at the far future. Since the process being released can't be signaled any longer, it remains and waits for the echo-back event in that far future. Back to history, the draining feature was implemented at the time we misinterpreted POSIX definition for blocking file operation. Actually, such a behavior is superfluous at release, and we should just release the device as is instead of keeping it up forever. This patch just removes the draining call that may block the release for too long time unexpectedly. BugLink: http://lkml.kernel.org/r/CACT4Y+Y4kD-aBGj37rf-xBw9bH3GMU6P+MYg4W1e-s-paVD2pg@mail.gmail.com Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-01i2c: brcmstb: allocate correct amount of memory for regmapWolfram Sang
We want the size of the struct, not of a pointer to it. To be future proof, just dereference the pointer to get the desired type. Fixes: dd1aa2524bc5 ("i2c: brcmstb: Add Broadcom settop SoC i2c controller driver") Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2016-03-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
Pull sparc fixes from David Miller: 1) System call tracing doesn't handle register contents properly across the trace. From Mike Frysinger. 2) Hook up copy_file_range 3) Build fix for 32-bit with newer tools. 4) New sun4v watchdog driver, from Wim Coekaerts. 5) Set context system call has to allow for servicable faults when we flush the register windows to memory * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Fix sparc64_set_context stack handling. sparc32: Add -Wa,-Av8 to KBUILD_CFLAGS. Add sun4v_wdt watchdog driver sparc: Fix system call tracing register handling. sparc: Hook up copy_file_range syscall.
2016-03-01CIFS: Fix duplicate line introduced by clone_file_range patchSteve French
Commit 04b38d601239b4 ("vfs: pull btrfs clone API to vfs layer") added a duplicated line (in cifsfs.c) which causes a sparse compile warning. Signed-off-by: Steve French <steve.french@primarydata.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-03-02drm/exynos/dsi: use core helper to create DSI packetAndrzej Hajda
Core provides generic helper to create DSI packet, use it instead of custom code. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-03-01drm/exynos: use real device for DMA-mapping operationsMarek Szyprowski
This patch changes device pointer provided to all calls to DMA-mapping subsystem from the virtual exynos-drm 'device' to the real device pointer of one of the CRTC devices (decon, fimd or mixer). This way no more hacks will be needed to configure proper DMA-mapping address space on the common virtual exynos-drm device. This change also removes the need for some hacks in IOMMU related code. It also finally solves the problem of Exynos DRM driver not working on ARM64 architecture, which provides noop-based DMA-mapping operations for virtual platform devices. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-03-01mac80211: minstrel_ht: fix a logic error in RTS/CTS handlingFelix Fietkau
RTS/CTS needs to be enabled if the rate is a fallback rate *or* if it's a dual-stream rate and the sta is in dynamic SMPS mode. Cc: stable@vger.kernel.org Fixes: a3ebb4e1b763 ("mac80211: minstrel_ht: handle peers in dynamic SMPS") Reported-by: Matías Richart <mrichart@fing.edu.uy> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-03-01mac80211: Fix Public Action frame RX in AP modeJouni Malinen
Public Action frames use special rules for how the BSSID field (Address 3) is set. A wildcard BSSID is used in cases where the transmitter and recipient are not members of the same BSS. As such, we need to accept Public Action frames with wildcard BSSID. Commit db8e17324553 ("mac80211: ignore frames between TDLS peers when operating as AP") added a rule that drops Action frames to TDLS-peers based on an Action frame having different DA (Address 1) and BSSID (Address 3) values. This is not correct since it misses the possibility of BSSID being a wildcard BSSID in which case the Address 1 would not necessarily match. Fix this by allowing mac80211 to accept wildcard BSSID in an Action frame when in AP mode. Fixes: db8e17324553 ("mac80211: ignore frames between TDLS peers when operating as AP") Cc: stable@vger.kernel.org Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-03-01mac80211: check PN correctly for GCMP-encrypted fragmented MPDUsJohannes Berg
Just like for CCMP we need to check that for GCMP the fragments have PNs that increment by one; the spec was updated to fix this security issue and now has the following text: The receiver shall discard MSDUs and MMPDUs whose constituent MPDU PN values are not incrementing in steps of 1. Adapt the code for CCMP to work for GCMP as well, luckily the relevant fields already alias each other so no code duplication is needed (just check the aliasing with BUILD_BUG_ON.) Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-03-01drm/exynos: refactor driver and device registration codeMarek Szyprowski
This patch refactors driver and device registration by moving all drivers to the common array. This way additional flags can be added later for new features. #ifdef-based code has been replaced by IS_ENABLED() macro usage. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-03-01drm/exynos: use arch independent types in uapi headerAndrzej Hajda
User API structs should not use types which size/alignment/padding depends on architecture. The patch fixes it for all structures except drm_exynos_g2d_userptr, as g2d related stuff seems to be more complicated and will be reviewed/adjusted later. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-03-01drm/exynos: remove platform data structures and include/drm/exynos_drm.hAndrzej Hajda
Platform data structures are not used for long time so the whole header file can be safely removed. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-03-01drm/exynos/fimc: remove unused camera interface polarization codeAndrzej Hajda
Polarization was never configured for DRM-FIMC device, so fimc_set_polarity function did nothing. In fact DRM does not use camera interface so there is no point in configuring it. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-03-01drm/exynos: remove struct exynos_drm_panel_infoAndrzej Hajda
struct exynos_drm_panel_info is not used anymore, except exynos_dp, which can integrate useful fields directly into its context. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-03-01drm/exynos: add exynos5420 support for fimdChanho Park
This patch adds a exynos5420 driver data to support mic_bypass option to bypass the mic from display out path. The mic(Mobile image compressor) compresses RGB data from fimd and send the compressed data to the mipi dsi. The bypass option can be founded from system register and the bit is 11. The option bit has been introduced since exynos5420. The only difference between exynos5250 and exynos5420/exynos5422 is existence of the bit. Until the MIC is defined and enabled from device tree, the bypass mic will be default option. Signed-off-by: Chanho Park <chanho61.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-03-01drm/exynos: use DIV_ROUND_CLOSEST to find the closest divChanho Park
This patch uses DIV_ROUND_CLOSEST instead of DIV_ROUND_UP The DIV_ROUND_CLOSEST can be used to find the closest integer value when we divide some integers. Signed-off-by: Chanho Park <chanho61.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-03-01drm/exynos: remove incorrect ccflags from MakefileAndrzej Hajda
Include directories are provided by core already, adding them in driver is redundand and causes warnings in case of out-of-tree build. v2: - fixed include in exynos_drm_iommu.c - typo in commit message Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-03-01drm/exynos/decon: make irq handler staticAndrzej Hajda
The function is used only locally. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-03-01drm/exynos/hdmi: remove unused variableAndrzej Hajda
The variable is unused for long time. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-03-01drm/exynos/dsi: constify read only structuresAndrzej Hajda
All global variables are read only. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-03-01drm/exynos/dsi: replace registry access macros with functionsAndrzej Hajda
Functions are preferred over macros as more type-safe. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-03-01drm/exynos: support exynos5422 mipi-dsiChanho Park
This patch supports mipi dsi for exynos5422. The dsi register offsets of the exynos5422 are similar with exynos5433. However, the values of the registers are quite different from the exynos5433. For example, the exynos5422 uses sw reset like previous chips. Signed-off-by: Chanho Park <chanho61.park@samsung.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-03-01drm/exynos/decon: fix disable clocks orderAndrzej Hajda
Decon requires that clocks should be disabled in reverse order. Otherwise system hangs. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-03-01drm/exynos: fix incorrect cpu address for dma_mmap_attrs()Marek Szyprowski
dma_mmap_attrs() should be called with cpu address returned by dma_alloc_attrs(). Existing code however passed pages array base as cpu address. This worked only by a pure luck on ARM architecture. This patch fixes this issue. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-03-01drm/exynos: exynos5433_decon: fix wrong state in decon_vblank_enableMarek Szyprowski
BIT_IRQS_ENABLED was never set because of incorrect test in decon_vlank_enable() function, what resulted in lack of enabling vblank support. This patch fixes this issue. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-03-01drm/exynos: exynos5433_decon: fix wrong state assignment in decon_enableMarek Szyprowski
Patch ebf3fd403b79ba6561bd1a4bb5a7cacc99da08e5 ("drm/exynos: add pm_runtime to DECON 5433") removed some code from decon_enable() function, but it left set_bit(BIT_SUSPENDED, &ctx->flags) call, which was earlier called only in error path. This patch removes it, what finally lets driver to go out of suspended state. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-03-01drm/exynos: dsi: restore support for drm bridgeMarek Szyprowski
This patch fixes issue introduced by commit cf67cc9a29ac19c98bc4fa0e6d14b0c1f592d322 ("drm/exynos: remove struct exynos_drm_display"), which removed assigning of drm bridge to drm encoder. Lack of it caused that no bridge callbacks were called on encoder enable/disable actions. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-03-01drm/exynos: mic: make all functions staticMarek Szyprowski
There is no point exposing all internal functions to global kernel name space, so make all internals functions static. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-03-01drm/exynos: mic: convert to component frameworkMarek Szyprowski
MIC is SoC component and important part of kms pipeline on Exynos5433, so convert it to use component framework like other KMS/CRTC drivers. MIC driver is already listed on KMS component driver list in Exynos DRM core, so without this conversion, initialization of Exynos DRM core fails on Exynos 5433 SoC. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-03-01drm/exynos: mic: use devm_clk interfaceMarek Szyprowski
Drivers should use devm_clk* interface instead of of_clk* functions. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-03-01drm/exynos: fix types for compilation on 64bit architecturesMarek Szyprowski
This patch fixes compilation warnings (on 64bit architectures) and bugs related to casting pointers through 32bit integers. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-03-01drm/exynos: ipp: fix incorrect format specifiers in debug messagesMarek Szyprowski
Drivers should use %p for printing pointers instead of hardcoding them as hexadecimal integers. This patch fixes compilation warnings on 64bit architectures. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-03-01drm/exynos: depend on ARCH_EXYNOS for DRM_EXYNOSJoonyoung Shim
Because PLAT_SAMSUNG isn't include exynos SoCs for arm64, but ARCH_EXYNOS can do it. And it also needs to add ARCH_S3C64XX instead of PLAT_SAMSUNG. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-03-01ALSA: usb-audio: Add a quirk for Plantronics DA45Dennis Kadioglu
Plantronics DA45 does not support reading the sample rate which leads to many lines of "cannot get freq at ep 0x4" and "cannot get freq at ep 0x84". This patch adds the USB ID of the DA45 to quirks.c and avoids those error messages. Signed-off-by: Dennis Kadioglu <denk@post.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit (git 2.34.1) at 2025-09-13 02:44:20 +0000