Age | Commit message (Collapse) | Author |
|
quirk set"
This reverts commit 5d5323a6f3625f101dbfa94ba3ef7706cce38760.
That commit effectively disabled Intel host initiated U1/U2 lpm for devices
with periodic endpoints.
Before that commit we disabled host initiated U1/U2 lpm if the exit latency
was larger than any periodic endpoint service interval, this is according
to xhci spec xhci 1.1 specification section 4.23.5.2
After that commit we incorrectly checked that service interval was smaller
than U1/U2 inactivity timeout. This is not relevant, and can't happen for
Intel hosts as previously set U1/U2 timeout = 105% * service interval.
Patch claimed it solved cases where devices can't be enumerated because of
bandwidth issues. This might be true but it's a side effect of accidentally
turning off lpm.
exit latency calculations have been revised since then
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210820123503.2605901-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Only TDs with status TD_CLEARING_CACHE will be given back after
cache is cleared with a set TR deq command.
xhci_invalidate_cached_td() failed to set the TD_CLEARING_CACHE status
for some cancelled TDs as it assumed an endpoint only needs to clear the
TD it stopped on.
This isn't always true. For example with streams enabled an endpoint may
have several stream rings, each stopping on a different TDs.
Note that if an endpoint has several stream rings, the current code
will still only clear the cache of the stream pointed to by the last
cancelled TD in the cancel list.
This patch only focus on making sure all canceled TDs are given back,
avoiding hung task after device removal.
Another fix to solve clearing the caches of all stream rings with
cancelled TDs is needed, but not as urgent.
This issue was simultanously discovered and debugged by
by Tao Wang, with a slightly different fix proposal.
Fixes: 674f8438c121 ("xhci: split handling halted endpoints into two steps")
Cc: <stable@vger.kernel.org> #5.12
Reported-by: Tao Wang <wat@codeaurora.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210820123503.2605901-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Removes static char buffer usage in the following decode functions:
xhci_decode_ctrl_ctx()
xhci_decode_slot_context()
xhci_decode_usbsts()
xhci_decode_doorbell()
xhci_decode_ep_context()
Caller must provide a buffer to use.
In tracing use __get_str() as recommended to pass buffer.
Minor changes are needed in other xhci code as these functions are also
used elsewhere
Cc: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210820123503.2605901-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Removes static char buffer usage in the following decode functions:
xhci_decode_trb()
xhci_decode_ptortsc()
Caller must provide a buffer to use.
In tracing use __get_str() as recommended to pass buffer.
Minor chanes are needed in xhci debugfs code as these functions are also
used there. Changes include moving XHCI_MSG_MAX definititon from
xhci-trace.h to xhci.h
Cc: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210820123503.2605901-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This adds a function for what has been magic register writes so far.
It's based on recent changes to vendor drivers r8101, r8168, r8125,
and deals with events that trigger an early ASPM L1 exit.
Description of the bits has been kindly provided by Realtek.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This change extends the existing GRO coalesce test to
allow running on top of a veth pair, so that no H/W dep
is required to run them.
By default gro.sh will use the veth backend, and will try
to use exiting H/W in loopback mode if a specific device
name is provided with the '-i' command line option.
No functional change is intended for the loopback-based
tests, just move all the relevant initialization/cleanup
code into the related script.
Introduces a new initialization helper script for the
veth backend, and plugs the correct helper script according
to the provided command line.
Additionally, enable veth-based tests by default.
v1 -> v2:
- drop unused code in setup_veth_ns() - Willem
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
* for-next/entry:
: More entry.S clean-ups and conversion to C.
arm64: entry: call exit_to_user_mode() from C
arm64: entry: move bulk of ret_to_user to C
arm64: entry: clarify entry/exit helpers
arm64: entry: consolidate entry/exit helpers
|
|
remote-tracking branch 'arm64/for-next/perf' into for-next/core
* arm64/for-next/perf:
arm64/perf: Replace '0xf' instances with ID_AA64DFR0_PMUVER_IMP_DEF
* for-next/mte:
: Miscellaneous MTE improvements.
arm64/cpufeature: Optionally disable MTE via command-line
arm64: kasan: mte: remove redundant mte_report_once logic
arm64: kasan: mte: use a constant kernel GCR_EL1 value
arm64: avoid double ISB on kernel entry
arm64: mte: optimize GCR_EL1 modification on kernel entry/exit
Documentation: document the preferred tag checking mode feature
arm64: mte: introduce a per-CPU tag checking mode preference
arm64: move preemption disablement to prctl handlers
arm64: mte: change ASYNC and SYNC TCF settings into bitfields
arm64: mte: rename gcr_user_excl to mte_ctrl
arm64: mte: avoid TFSRE0_EL1 related operations unless in async mode
* for-next/misc:
: Miscellaneous updates.
arm64: Do not trap PMSNEVFR_EL1
arm64: mm: fix comment typo of pud_offset_phys()
arm64: signal32: Drop pointless call to sigdelsetmask()
arm64/sve: Better handle failure to allocate SVE register storage
arm64: Document the requirement for SCR_EL3.HCE
arm64: head: avoid over-mapping in map_memory
arm64/sve: Add a comment documenting the binutils needed for SVE asm
arm64/sve: Add some comments for sve_save/load_state()
arm64: replace in_irq() with in_hardirq()
arm64: mm: Fix TLBI vs ASID rollover
arm64: entry: Add SYM_CODE annotation for __bad_stack
arm64: fix typo in a comment
arm64: move the (z)install rules to arch/arm64/Makefile
arm64/sve: Make fpsimd_bind_task_to_cpu() static
arm64: unnecessary end 'return;' in void functions
arm64/sme: Document boot requirements for SME
arm64: use __func__ to get function name in pr_err
arm64: SSBS/DIT: print SSBS and DIT bit when printing PSTATE
arm64: cpufeature: Use defined macro instead of magic numbers
arm64/kexec: Test page size support with new TGRAN range values
* for-next/kselftest:
: Kselftest additions for arm64.
kselftest/arm64: signal: Add a TODO list for signal handling tests
kselftest/arm64: signal: Add test case for SVE register state in signals
kselftest/arm64: signal: Verify that signals can't change the SVE vector length
kselftest/arm64: signal: Check SVE signal frame shows expected vector length
kselftest/arm64: signal: Support signal frames with SVE register data
kselftest/arm64: signal: Add SVE to the set of features we can check for
kselftest/arm64: pac: Fix skipping of tests on systems without PAC
kselftest/arm64: mte: Fix misleading output when skipping tests
kselftest/arm64: Add a TODO list for floating point tests
kselftest/arm64: Add tests for SVE vector configuration
kselftest/arm64: Validate vector lengths are set in sve-probe-vls
kselftest/arm64: Provide a helper binary and "library" for SVE RDVL
kselftest/arm64: Ignore check_gcr_el1_cswitch binary
|
|
These 2 functions are unused, so they can be simply removed
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Acked-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/d591e29d77da73790c71f7a8e508a8b16fd48f65.1629789580.git.paskripkin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 31c00d2aeaa2 ("arm64: Disable fine grained traps on boot") zeroed
the fine grained trap registers to prevent unwanted register traps from
occuring. However, for the PMSNEVFR_EL1 register, the corresponding
HDFG{R,W}TR_EL2.nPMSNEVFR_EL1 fields must be 1 to disable trapping. Set
both fields to 1 if FEAT_SPEv1p2 is detected to disable read and write
traps.
Fixes: 31c00d2aeaa2 ("arm64: Disable fine grained traps on boot")
Cc: <stable@vger.kernel.org> # 5.13.x
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210824154523.906270-1-alexandru.elisei@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Remove the condition with no effect (if == else) in rtw_led.c
file.
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Saurav Girepunje <saurav.girepunje@gmail.com>
Link: https://lore.kernel.org/r/YSFgrLUfXzgcT6k4@user
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There are only two definitions from ethernet.h used in the driver.
Namely:
#define ETHERNET_HEADER_SIZE 14 /* Ethernet Header Length */
#define LLC_HEADER_SIZE 6 /* LLC Header Length */
Both are only used in the file core/rtw_recv.c. Replace the usage of
ETHERNET_HEADER_SIZE with ETH_HLEN, move the definition of LLC_HEADER_SIZE
into rtw_recv.h and remove the now unused ethernet.h header file.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210824123621.10801-4-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The struct ip_options declared in ip.h is only unsed in the optlength
macro which is also defined in ip.h and not used in the driver code.
All other definitions/declarations in ip.h are duplicated from
<include/uapi/linux/ip.h>. Remove the ip.h header file and its includes.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210824123621.10801-3-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
All constants, declarations and macros in if_ether.h are either
duplicated from <uapi/linux/if_ether.h> or unused. Remove the file
if_ether.h and its includes.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210824123621.10801-2-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
rtw_deinit_intf_priv() always return success, so there is no need in
return value
Acked-by: Michael Straube <straube.linux@gmail.com>
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Acked-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20210823184059.19742-1-paskripkin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use is_multicast_ether_addr instead of custom macro IS_MCAST, the
buffer is properly aligned.
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210823120106.9633-9-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use is_multicast_ether_addr instead of custom macro IS_MCAST, the
buffer is properly aligned.
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210823120106.9633-8-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use is_multicast_ether_addr instead of custom macro IS_MCAST, all
buffers are properly aligned.
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210823120106.9633-7-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use is_multicast_ether_addr instead of custom macro IS_MCAST, all
buffers are properly aligned.
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210823120106.9633-6-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use is_multicast_ether_addr instead of custom macro IS_MCAST, all
buffers are properly aligned.
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210823120106.9633-5-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use is_multicast_ether_addr instead of custom macro IS_MCAST, the
buffer is properly aligned.
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210823120106.9633-4-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use is_multicast_ether_addr instead of custom macro IS_MCAST, the
buffer is properly aligned.
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210823120106.9633-3-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add __aligned(2) to eth address buffers in structs rx_pkt_attrib and
pkt_attrib to ensure proper alignment for usage with functions from
<linux/etherdevice.h>
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210823120106.9633-2-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove unnecessary parentheses to improve readability.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210822114014.21584-2-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
if (0) is never true, remove code that is never executed.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210822114014.21584-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The driver is for chips that do not operate in the 5 GHz band.
Remove some 5 GHz related code.
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Acked-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210823193028.12391-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
All functions declared in the cmd_osdep.h header file are only used in
a single c source file. Make the functions static and remove the header
file and its includes.
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210821155151.25822-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The 16- and 32-bit quantities in the dhcp message definition must be
big endian.
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Link: https://lore.kernel.org/r/20210821151459.26078-1-Larry.Finger@lwfinger.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove forward declaration of Efuse_Read1ByteFromFakeContent function
from core/rtw_efuse.c, as the function is defined in full directly
after this and therefore this forward declaration is redundant.
In addition, convert the storage class of the function to static, as the
function is only used with rtw_efuse.c, and tidy up the signature
alignment.
Acked-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Acked-by: Michael Straube<straube.linux@gmail.com>
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210821105615.6307-1-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The "pbackup_remainder_ie" variable is not freed when "pwps_ie_src" is null
Fixes: 15865124feed ("staging: r8188eu: introduce new core dir for RTL8188eu driver")
Acked-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Xiangyang Zhang <xyz.sun.ok@gmail.com>
Link: https://lore.kernel.org/r/20210821081824.14745-1-xyz.sun.ok@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Set the pipe for reading or writing in usbctrl_vendorreq only once.
There's no need to set it again for every retry.
This patch is an adaptation of commit 889ed8b5e374 ("staging: rtl8188eu:
set pipe only once") for the new r8188eu driver.
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Acked-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210821164859.4351-10-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove function pointers which are not used by the r8188eu driver.
Acked-by: Michael Straube <straube.linux@gmail.com>
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210821164859.4351-9-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove unnecessary variables, check the length.
Acked-by: Michael Straube <straube.linux@gmail.com>
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210821164859.4351-8-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove unnecessary variables, summarize declarations and assignments.
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Acked-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210821164859.4351-7-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove unnecessary variables, summarize declarations and assignments.
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Acked-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210821164859.4351-6-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The VENDOR_READ and VENDOR_WRITE defines are not used.
Acked-by: Michael Straube <straube.linux@gmail.com>
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210821164859.4351-5-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace the numeric values with USB constants to make their
meaning clearer.
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Acked-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210821164859.4351-4-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
At the moment, usbctrl_vendorreq's requesttype parameter must be set to
1 for reading and 0 for writing. It's then converted to the actual
bmRequestType for the USB control request. We can simplify the code and
avoid this conversion if the caller passes the actual bmRequestType.
This patch is an adaptation of commit 788fde031027 ("staging: rtl8188eu:
use actual request type as parameter") for the new r8188eu driver.
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Acked-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210821164859.4351-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
_HCI_OPS_OS_C_ is not used in the r8188eu driver. Remove it.
Acked-by: Michael Straube <straube.linux@gmail.com>
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210821164859.4351-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
name is a const char * by default. This type should be ok for r8188eu.
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Acked-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210821164859.4351-1-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The header file ehternet.h defines only two constants.
#define ETHERNET_HEADER_SIZE 14 /* Ethernet Header Length */
#define LLC_HEADER_SIZE 6 /* LLC Header Length */
Both are only used in the file core/rtw_recv.c and ETHERNET_HEADER_SIZE
just duplicates the in-kernel constant ETH_HLEN. Replace the usage of
ETHERNET_HEADER_SIZE with ETH_HLEN, move the definition of LLC_HEADER_SIZE
into rtw_rev.h (renamed to LLC_HEADER_LENGTH) and remove the now unused
header file ethernet.h.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210825100842.13217-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
As noted in the "Deprecated Interfaces, Language Features, Attributes,
and Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead
to values wrapping around and a smaller allocation being made than the
caller was expecting. Using those allocations could lead to linear
overflows of heap memory and other misbehaviors.
In this case these aren't actually dynamic sizes: both sides of the
multiplication are constant values. However it is best to refactor these
anyway, just to keep the open-coded math idiom out of code.
So, use the purpose specific kcalloc() function instead of the argument
size * count in the kzalloc() function.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Len Baker <len.baker@gmx.com>
Link: https://lore.kernel.org/r/20210824090039.GA7999@titan
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Initialize the pre_cmd_cnt, post_cmd_cnt and rf_cmd_cnt variables in the
definition block as it is not necessary to do this in the middle of the
function.
Signed-off-by: Len Baker <len.baker@gmx.com>
Link: https://lore.kernel.org/r/20210824073643.GA7396@titan
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Avoid CameCase in the names of all local variables inside the function
rtl8192_phy_SwChnlStepByStep().
Signed-off-by: Len Baker <len.baker@gmx.com>
Link: https://lore.kernel.org/r/20210824072545.7321-2-len.baker@gmx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
remove rtw_set_802_11_bssid() function left unused
after wext routines removal.
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Link: https://lore.kernel.org/r/b3d1756b6ae4be7ca4fc50e12bd7e10587a6020c.1629727333.git.fabioaiuto83@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
remove functions that once were meant to notify
wext events to userspace. Now they are donig nothing
useful so just remove them.
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Link: https://lore.kernel.org/r/0d745350ff3d411dda329b8c1e2261361570db6e.1629727333.git.fabioaiuto83@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
fix the following post-commit hook checkpatch issue:
CHECK: Logical continuations should be on the previous line
52: FILE: drivers/staging/rtl8723bs/os_dep/ioctl_linux.c:389:
+ if (padapter->securitypriv.dot11PrivacyAlgrthm == _TKIP_
+ || padapter->securitypriv.dot11PrivacyAlgrthm
== _TKIP_WTMIC_
CHECK: Logical continuations should be on the previous line
53: FILE: drivers/staging/rtl8723bs/os_dep/ioctl_linux.c:390:
+ || padapter->securitypriv.dot11PrivacyAlgrthm
== _TKIP_WTMIC_
+ || padapter->securitypriv.dot11PrivacyAlgrthm
== _AES_)
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Link: https://lore.kernel.org/r/5d4e7ab18005e69e8cc162619149d6fa93568875.1629727333.git.fabioaiuto83@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
fix the following post commit hook checkpatch issues:
ERROR: code indent should use tabs where possible
2463: FILE: drivers/staging/rtl8723bs/os_dep/ioctl_linux.c:388:
+ if (padapter->securitypriv.dot11PrivacyAlgrthm == _TKIP_$
ERROR: code indent should use tabs where possible
2464: FILE: drivers/staging/rtl8723bs/os_dep/ioctl_linux.c:389:
+ || padapter->securitypriv.dot11PrivacyAlgrthm
== _TKIP_WTMIC_$
ERROR: code indent should use tabs where possible
2465: FILE: drivers/staging/rtl8723bs/os_dep/ioctl_linux.c:390:
+ || padapter->securitypriv.dot11PrivacyAlgrthm == _AES_)$
ERROR: code indent should use tabs where possible
2466: FILE: drivers/staging/rtl8723bs/os_dep/ioctl_linux.c:391:
+ /* WPS open need to enable multicast */$
ERROR: code indent should use tabs where possible
2467: FILE: drivers/staging/rtl8723bs/os_dep/ioctl_linux.c:392:
+ /* check_fwstate(&padapter->mlmepriv,
WIFI_UNDER_WPS) == true) */$
ERROR: code indent should use tabs where possible
2468: FILE: drivers/staging/rtl8723bs/os_dep/ioctl_linux.c:393:
+ rtw_hal_set_hwreg(padapter, HW_VAR_OFF_RCR_AM,
null_addr);$
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Link: https://lore.kernel.org/r/aa394052c8d81b4a00356adf5f98fc3c81f8b1d9.1629727333.git.fabioaiuto83@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
cfg80211 has been fully implemented so
remove all wext and wext private handlers and their
registration.
Now wext userspace calls can be managed via
cfg80211 wext compatibility.
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Link: https://lore.kernel.org/r/61c4bb20bbb6ce30e4ddd01aa73de3f686a99445.1629727333.git.fabioaiuto83@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When nothing is connected to pcie ports, each port is set to reset state.
When this occurs, next access result in a hang on boot as follows:
mt7621-pci 1e140000.pcie: pcie0 no card, disable it (RST & CLK)
mt7621-pci 1e140000.pcie: pcie1 no card, disable it (RST & CLK)
mt7621-pci 1e140000.pcie: pcie2 no card, disable it (RST & CLK)
[ HANGS HERE ]
Fix this just detecting 'nothing is connected state' to avoid next accesses
to pcie port related configuration registers.
Fixes: b99cc3a2b6b6 ("staging: mt7621-pci: avoid custom 'map_irq' function")
Cc: stable <stable@vger.kernel.org>
Reported-by: DENG Qingfang <dqfext@gmail.com>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20210823170803.2108-1-sergio.paracuellos@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|