summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-04-11arm64: mm: always map fixmap at page granularityMark Rutland
Today the fixmap code largely maps elements at PAGE_SIZE granularity, but we special-case the FDT mapping such that it can be mapped with 2M block mappings when 4K pages are in use. The original rationale for this was simplicity, but it has some unfortunate side-effects, and complicates portions of the fixmap code (i.e. is not so simple after all). The FDT can be up to 2M in size but is only required to have 8-byte alignment, and so it may straddle a 2M boundary. Thus when using 2M block mappings we may map up to 4M of memory surrounding the FDT. This is unfortunate as most of that memory will be unrelated to the FDT, and any pages which happen to share a 2M block with the FDT will by mapped with Normal Write-Back Cacheable attributes, which might not be what we want elsewhere (e.g. for carve-outs using Non-Cacheable attributes). The logic to handle mapping the FDT with 2M blocks requires some special cases in the fixmap code, and ties it to the early page table configuration by virtue of the SWAPPER_TABLE_SHIFT and SWAPPER_BLOCK_SIZE constants used to determine the granularity used to map the FDT. This patch simplifies the FDT logic and removes the unnecessary mappings of surrounding pages by always mapping the FDT at page granularity as with all other fixmap mappings. To do so we statically reserve multiple PTE tables to cover the fixmap VA range. Since the FDT can be at most 2M, for 4K pages we only need to allocate a single additional PTE table, and for 16K and 64K pages the existing single PTE table is sufficient. The PTE table allocation scales with the number of slots reserved in the fixmap, and so this also makes it easier to add more fixmap entries if we require those in future. Our VA layout means that the fixmap will always fall within a single PMD table (and consequently, within a single PUD/P4D/PGD entry), which we can verify at compile time with a static_assert(). With that assert a number of runtime warnings become impossible, and are removed. I've boot-tested this patch with both 4K and 64K pages. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Will Deacon <will@kernel.org> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Link: https://lore.kernel.org/r/20230406152759.4164229-4-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2023-04-11arm64: mm: move fixmap code to its own fileMark Rutland
Over time, arm64's mm/mmu.c has become increasingly large and painful to navigate. Move the fixmap code to its own file where it can be understood in isolation. There should be no functional change as a result of this patch. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Will Deacon <will@kernel.org> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Link: https://lore.kernel.org/r/20230406152759.4164229-3-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2023-04-11arm64: add FIXADDR_TOT_{START,SIZE}Mark Rutland
Currently arm64's FIXADDR_{START,SIZE} definitions only cover the runtime fixmap slots (and not the boot-time fixmap slots), but the code for creating the fixmap assumes that these definitions cover the entire fixmap range. This means that the ptdump boundaries are reported in a misleading way, missing the VA region of the runtime slots. In theory this could also cause the fixmap creation to go wrong if the boot-time fixmap slots end up spilling into a separate PMD entry, though luckily this is not currently the case in any configuration. While it seems like we could extend FIXADDR_{START,SIZE} to cover the entire fixmap area, core code relies upon these *only* covering the runtime slots. For example, fix_to_virt() and virt_to_fix() try to reject manipulation of the boot-time slots based upon FIXADDR_{START,SIZE}, while __fix_to_virt() and __virt_to_fix() can handle any fixmap slot. This patch follows the lead of x86 in commit: 55f49fcb879fbeeb ("x86/mm: Fix overlap of i386 CPU_ENTRY_AREA with FIX_BTMAP") ... and add new FIXADDR_TOT_{START,SIZE} definitions which cover the entire fixmap area, using these for the fixmap creation and ptdump code. As the boot-time fixmap slots are now rejected by fix_to_virt(), the early_fixmap_init() code is changed to consistently use __fix_to_virt(), as it already does in a few cases. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Will Deacon <will@kernel.org> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Link: https://lore.kernel.org/r/20230406152759.4164229-2-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2023-04-11drm/vmwgfx: remove unused vmw_overlay functionTom Rix
clang with W=1 reports drivers/gpu/drm/vmwgfx/vmwgfx_overlay.c:56:35: error: unused function 'vmw_overlay' [-Werror,-Wunused-function] static inline struct vmw_overlay *vmw_overlay(struct drm_device *dev) ^ This function is not used, so remove it. Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Zack Rusin <zackr@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230321182414.1826372-1-trix@redhat.com
2023-04-11arm64: stacktrace: always inline core stacktrace functionsMark Rutland
The arm64 stacktrace code can be used in kprobe context, and so cannot be safely probed. Some (but not all) of the unwind functions are annotated with `NOKPROBE_SYMBOL()` to ensure this, with others markes as `__always_inline`, relying on the top-level unwind function being marked as `noinstr`. This patch has stacktrace.c consistently mark the internal stacktrace functions as `__always_inline`, removing the need for NOKPROBE_SYMBOL() as the top-level unwind function (arch_stack_walk()) is marked as `noinstr`. This is more consistent and is a simpler pattern to follow for future additions to stacktrace.c. There should be no functional change as a result of this patch. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Kalesh Singh <kaleshsingh@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Madhavan T. Venkataraman <madvenka@linux.microsoft.com> Cc: Mark Brown <broonie@kernel.org> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20230411162943.203199-4-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2023-04-11arm64: stacktrace: move dump functions to end of fileMark Rutland
For historical reasons, the backtrace dumping functions are placed in the middle of stacktrace.c, despite using functions defined later. For clarity, and to make subsequent refactoring easier, move the dumping functions to the end of stacktrace.c There should be no functional change as a result of this patch. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Kalesh Singh <kaleshsingh@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Madhavan T. Venkataraman <madvenka@linux.microsoft.com> Cc: Mark Brown <broonie@kernel.org> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20230411162943.203199-3-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2023-04-11arm64: stacktrace: recover return address for first entryMark Rutland
The function which calls the top-level backtracing function may have been instrumented with ftrace and/or kprobes, and hence the first return address may have been rewritten. Factor out the existing fgraph / kretprobes address recovery, and use this for the first address. As the comment for the fgraph case isn't all that helpful, I've also dropped that. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Kalesh Singh <kaleshsingh@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Madhavan T. Venkataraman <madvenka@linux.microsoft.com> Cc: Mark Brown <broonie@kernel.org> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20230411162943.203199-2-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2023-04-11remoteproc: imx_dsp_rproc: Fix kernel test robot sparse warningMathieu Poirier
This patch fixes the kernel test robot warning reported here: https://lore.kernel.org/bpf/642f916b.pPIKZ%2Fl%2F%2Fbw8tvIH%25lkp@intel.com/T/ Fixes: 408ec1ff0caa ("remoteproc: imx_dsp_rproc: Add custom memory copy implementation for i.MX DSP Cores") Link: https://lore.kernel.org/r/20230407161429.3973177-1-mathieu.poirier@linaro.org Tested-by: Iuliana Prodan <iuliana.prodan@nxp.com> Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2023-04-11Merge tag 'mtd/fixes-for-6.3-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull mtd fixes from Miquel Raynal: "Core fix: - mtdblock: Tolerate corrected bit-flips Raw NAND fixes: - meson: Fix bitmask for length in command word - stm32_fmc2: - Remove unsupported EDO mode - Use timings.mode instead of checking tRC_min. The first patch is the real fix but nowadays we use timings.mode instead of bare timings, so in order to ease the backports, the fix was split into two steps, the first one easy to backport on older kernels, the second one just as a follow-up so recent stable kernels would look like the mainline" * tag 'mtd/fixes-for-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: rawnand: meson: fix bitmask for length in command word mtdblock: tolerate corrected bit-flips mtd: rawnand: stm32_fmc2: use timings.mode instead of checking tRC_min mtd: rawnand: stm32_fmc2: remove unsupported EDO mode
2023-04-11arm64: ftrace: Simplify get_ftrace_pltFlorent Revest
Following recent refactorings, the get_ftrace_plt function only ever gets called with addr = FTRACE_ADDR so its code can be simplified to always return the ftrace trampoline plt. Signed-off-by: Florent Revest <revest@chromium.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20230405180250.2046566-3-revest@chromium.org Signed-off-by: Will Deacon <will@kernel.org>
2023-04-11arm64: ftrace: Add direct call supportFlorent Revest
This builds up on the CALL_OPS work which extends the ftrace patchsite on arm64 with an ops pointer usable by the ftrace trampoline. This ops pointer is valid at all time. Indeed, it is either pointing to ftrace_list_ops or to the single ops which should be called from that patchsite. There are a few cases to distinguish: - If a direct call ops is the only one tracing a function: - If the direct called trampoline is within the reach of a BL instruction -> the ftrace patchsite jumps to the trampoline - Else -> the ftrace patchsite jumps to the ftrace_caller trampoline which reads the ops pointer in the patchsite and jumps to the direct call address stored in the ops - Else -> the ftrace patchsite jumps to the ftrace_caller trampoline and its ops literal points to ftrace_list_ops so it iterates over all registered ftrace ops, including the direct call ops and calls its call_direct_funcs handler which stores the direct called trampoline's address in the ftrace_regs and the ftrace_caller trampoline will return to that address instead of returning to the traced function Signed-off-by: Florent Revest <revest@chromium.org> Co-developed-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20230405180250.2046566-2-revest@chromium.org Signed-off-by: Will Deacon <will@kernel.org>
2023-04-11Merge tag 'trace-direct-v6.3-rc3' of ↵Will Deacon
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace into for-next/ftrace Pull in ftrace trampoline updates from Steve so that we can implement support for direct calls for arm64 on top: tracing: Direct trampoline updates Updates to the direct trampoline to allow ARM64 to have direct trampolines.
2023-04-11media: i2c: imx290: Add missing \n on dev_err_probe() messageAlexander Stein
Also dev_err_probe message require a trailing \n. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-11media: ccs: Document CCS static data file namesSakari Ailus
Document the firmware file names for CCS static data for CCS, SMIA++ and SMIA devices. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-11media: ccs: Differentiate SMIA and MIPI vendors in static dataSakari Ailus
MIPI CCS uses a 16-bit MIPI manufacturer identifier for firmware filenames compared to older 8-bit identifier used by SMIA. The requested firmware files used the MIPI manufacturer ID even for SMIA compliant devices, effectively making the manufacturer ID 0. While CCS static data is a feature of CCS 1.1, it has no hardware dependencies. Making this feature available for SMIA devices helps adding support for them and avoids requesting ill-generated CCS static data file names. The files are named as: ccs/smiapp-module-vv-mmmm-rrrr.fw, ccs/smiapp-sensor-vv-mmmm-rr.fw and ccs/smia-sensor-vv-mmmm-rr.fw where vv is the manufacturer ID, mmmm is the model ID and rr or rrrr is the revision number. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-11media: ccs: Apply module manufacturer hack on non-CCS devices onlySakari Ailus
Some modules don't have any model identification information in the register address space. The driver as a SMIA++ driver attempted to use sensor information in this case. This workaround is definitely not for CCS devices. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-11media: ccs: Support 16-bit sensor revision number registerSakari Ailus
Read 16-bit sensor revision number if the 8-bit register has value 0. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-11media: ccs: Add V4L2 controls from propertiesSakari Ailus
Add V4L2 controls (currently CAMERA_SENSOR_ROTATION and CAMERA_SENSOR_ORIENTATION) from properties. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-11media: ccs: Align flipping behaviour with other driversSakari Ailus
No longer mirror flipping controls if the sensor is mounted upside down. This way the behaviour of the flipping controls and rotation of the sensor are aligned with the rest of the drivers. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-11media: imx258: Remove mandatory 180 degrees rotationJacopo Mondi
The "rotation" fwnode device property is intended to allow specify the sensor's physical mounting rotation, so that it can be exposed through the read-only V4L2_CID_CAMERA_SENSOR_ROTATION control and applications can decide how to compensate for that. The imx258 driver has read-only VFLIP and HFLIP enabled, resulting in a 180 degrees image rotation being produced by the sensor. But this doesn't imply that the physical mounting rotation should match the driver's implementation. Now that the driver registers V4L2_CID_CAMERA_SENSOR_ROTATION and V4L2_CID_HFLIP/VFLIP correctly, userspace has all the required information to handle the rotation correctly, hence it is not necessary to require the 'rotation' property to be fixed to 180 degrees in DTS. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-11media: imx258: Register H/V flip controlsJacopo Mondi
Register controls for V4L2_CID_HFLIP and V4L2_CID_VFLIP. The controls are registered as read-only and enabled by default, as the driver embeds a 180 degrees rotation in its programming sequences and only supports that mode of operations. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-11media: dt-bindings: ov8856: Assign maintainership to myselfSakari Ailus
Dongchun's e-mail mailbox is no longer available, assign the maintainership to myself. The following message to <dongchun.zhu@mediatek.com> was undeliverable. The reason for the problem: 5.1.0 - Unknown address error 550-'Relaying mail to dongchun.zhu@mediatek.com is not allowed' Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-11MAINTAINERS: Assume ov8856 driver maintainershipSakari Ailus
Dongchun's e-mail address is no longer valid, assign the ov8856 driver to myself. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-11media: ipu3-cio2: support more camera sensors in cio2-bridgeBingbu Cao
Add more camera sensors into the supported camera sensors list to make cio2-bridge to support more camera sensors. Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-11media: hi556: add 2592x1444 resolutionJim Lai
Adding additional cropped 2592x1444 resolution for QHD output from Hi556 sensor Also implement the get_selection pad operation for the Hi556 sensor driver. The supported targets report the sensor's native size, the crop default rectangle and the crop rectangle. Signed-off-by: Jim Lai <jim.lai@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-11media: venus: drop unused opp_table field documentationKrzysztof Kozlowski
The struct venus_format does not have a "opp_table" field. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-11media: renesas: fdp1: remove R-Car H3 ES1.* handlingWolfram Sang
R-Car H3 ES1.* was only available to an internal development group and needed a lot of quirks and workarounds. These become a maintenance burden now, so our development group decided to remove upstream support and disable booting for this SoC. Public users only have ES2 onwards. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-11media: rcar-vin: csi2: remove R-Car H3 ES1.* handlingWolfram Sang
R-Car H3 ES1.* was only available to an internal development group and needed a lot of quirks and workarounds. These become a maintenance burden now, so our development group decided to remove upstream support and disable booting for this SoC. Public users only have ES2 onwards. Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-11media: rcar-vin: remove R-Car H3 ES1.* handlingWolfram Sang
R-Car H3 ES1.* was only available to an internal development group and needed a lot of quirks and workarounds. These become a maintenance burden now, so our development group decided to remove upstream support and disable booting for this SoC. Public users only have ES2 onwards. Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-11media: Use of_property_present() for testing DT property presenceRob Herring
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. As part of this, convert of_get_property/of_find_property calls to the recently added of_property_present() helper when we just want to test for presence of a property and nothing more. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-11media: ipu3-cio2: support multiple sensors and VCMs with same HIDBingbu Cao
In current cio2-bridge, it is using the hid name to register software node and software node will create kobject and sysfs entry according to the node name, if there are multiple sensors and VCMs which are sharing same HID name, it will cause the software nodes registration failure: sysfs: cannot create duplicate filename '/kernel/software_nodes/dw9714' ... Call Trace: software_node_register_nodes cio2_bridge_init ... kobject_add_internal failed for dw9714 with -EEXIST, don't try to register things with the same name in the same directory. One solution is appending the sensor link(Mipi Port) in SSDB as suffix of the node name to fix this problem. Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-11media: Accept non-subdev sinks in v4l2_create_fwnode_links_to_pad()Laurent Pinchart
The v4l2_create_fwnode_links_to_pad() helper requires the sink pad passed to it to belong to a subdev. This requirement can be lifted easily. Make the function usable for non-subdev sinks, which allows using it with video_device sinks. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-11media: i2c: adv7604: Fix range of hue controlLaurent Pinchart
The ADV7604, ADV7611 and ADV7612 software manuals document the CP_HUE value differently: - For ADV7604 and ADV7611, the hue is specified as an unsigned 8-bit value, and calculated as (CP_HUE[7:0] * 180) / 256 - 90 with the range set to [-90°, 90°]. Additionally, the values 0x00, 0x0f and 0xff are documented as corresponding to -90°, 0° and 90° respectively. - For ADV7612, the hue is specified as a signed 8-bit value in the range [0°, 360°[ without any formula. Additionally, the value 0x00 is documented as corresponding to 0°. The ADV7604 and ADV7611 documentation is clearly wrong as the example values don't correspond to the formula. Furthermore, the [-90°, 90°] range seems incorrect as it would cover only half of the hue space. The ADV7612 documentation is better, although the range should likely be [-180°, 180°[ if the value is signed. Given that the values wrap around, this makes no difference in practice. The hue values have been verified on ADV7612 to follow the documentation. There is a high chance they do as well on ADV7604 and ADV7611. In any case, all software manuals document the register as 8-bit, so the current range of the V4L2 hue control [0, 128] is not correct. Expand it to cover the full 8-bit space, using unsigned values to avoid breaking any application that may rely on 128 being a valid value. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-11media: i2c: adv7604: Enable video adjustmentLaurent Pinchart
The video adjustments (contrast, brightness, saturation and hue) are ignored by default by the device when the VID_ADJ_EN bit is clear. The corresponding V4L2 controls exposed by the drivers have thus no effect. Fix this by setting the VID_ADJ_EN bit. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-11media: i2c: ov2685: Make reset gpio optionalLuca Weiss
In some setups XSHUTDOWN is connected to DOVDD when it's unused, therefore treat the reset gpio as optional. Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-11media: dt-bindings: ov2685: convert to dtschemaLuca Weiss
Convert the text-based dt-bindings to yaml. Changes from original txt: * Take wording for various properties from other yaml bindings, this removes e.g. volt amount from schema since it isn't really relevant and the datasheet is a better source. * Don't make reset-gpios a required property since it can be tied to DOVDD instead. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Luca Weiss <luca@z3ntu.xyz> [Sakari Ailus: bump the maxItems for data-lanes to two] Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-11media: dt-bindings: media: rkisp1: complete ov2685 exampleLuca Weiss
With the upcoming conversion of ov2685 to dt-schema let's complete the example so validation succeeds. At the same time fix the indentation of the port node in this example. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-11media: mc-device: remove unnecessary __must_checkJason Kim
In the file mc-device.c, the function media_device_register_entity_notify() does not need to have the __must_check attribute since it returns only a value of 0. Therefore, we can remove this attribute and change the function's return type. Signed-off-by: Jason Kim <sukbeom.kim@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-11media: hi846: Fix memleak in hi846_init_controls()Wei Chen
hi846_init_controls doesn't clean the allocated ctrl_hdlr in case there is a failure, which causes memleak. Add v4l2_ctrl_handler_free to free the resource properly. Fixes: e8c0882685f9 ("media: i2c: add driver for the SK Hynix Hi-846 8M pixel camera") Signed-off-by: Wei Chen <harperchen1110@gmail.com> Reviewed-by: Martin Kepplinger <martin.kepplinger@puri.sm> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-11media: ov8856: Do not check for for module versionRicardo Ribalda
It the device is probed in non-zero ACPI D state, the module identification is delayed until the first streamon. The module identification has two parts: deviceID and version. To rea the version we have to enable OTP read. This cannot be done during streamon, becase it modifies REG_MODE_SELECT. Since the driver has the same behaviour for all the module versions, do not read the module version from the sensor's OTP. Cc: stable@vger.kernel.org Fixes: 0e014f1a8d54 ("media: ov8856: support device probe in non-zero ACPI D state") Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-11media: dt-bindings: Drop unneeded quotesRob Herring
Cleanup bindings dropping unneeded quotes. Once all these are fixed, checking for this can be enabled in yamllint. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Joe Tessler <jrt@google.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> #rockchip Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> [Sakari Ailus: Drop changes for files in which they had been done already] Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-11media: i2c: ov7670: Use the devm_clk_get_optional() helperChristophe JAILLET
Use devm_clk_get_optional() instead of hand writing it. This saves some loC and improves the semantic. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-11media: v4l: async: Return async sub-devices to subnotifier listSakari Ailus
When an async notifier is unregistered, the async sub-devices in the notifier's done list will disappear with the notifier. However this is currently also done to the sub-notifiers that remain registered. Their sub-devices only need to be unbound while the async sub-devices themselves need to be returned to the sub-notifier's waiting list. Do this now. Fixes: 2cab00bb076b ("media: v4l: async: Allow binding notifiers to sub-devices") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-11Merge tag 'ata-6.3-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull ata fix from Damien Le Moal: - Update my email address in the MAINTAINERS file * tag 'ata-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: MAINTAINERS: Change ata maintainer email addresses
2023-04-11arm64: dts: mediatek: mt8173: correct GPIO keys wakeupKrzysztof Kozlowski
gpio-keys,wakeup is a deprecated property. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230304123301.33952-1-krzysztof.kozlowski@linaro.org Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2023-04-11arm64: dts: mediatek: mt6795-xperia-m5: Add NXP PN547 NFC on I2C3AngeloGioacchino Del Regno
Add support for the NXP PN547 NFC chip found on this smartphone and configure its pins. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230327083647.22017-18-angelogioacchino.delregno@collabora.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2023-04-11arm64: dts: mediatek: mt6795-xperia-m5: Add Sensortek STK3310 ProximityAngeloGioacchino Del Regno
Add the STK3310 Proximity sensor and its pins. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230327083647.22017-17-angelogioacchino.delregno@collabora.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2023-04-11arm64: dts: mediatek: mt6795-xperia-m5: Add Synaptics RMI4 TouchscreenAngeloGioacchino Del Regno
Add the RMI4 Touchscreen on I2C2 and its pin definitions. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230327083647.22017-14-angelogioacchino.delregno@collabora.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2023-04-11arm64: dts: mediatek: mt6795-xperia-m5: Enable I2C 0-3 bussesAngeloGioacchino Del Regno
Properly configure and enable the three i2c controllers that have devices attached on the Sony Xperia M5 smartphone. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230327083647.22017-13-angelogioacchino.delregno@collabora.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2023-04-11arm64: dts: mediatek: mt6795: Add VDECSYS and VENCSYS clocksAngeloGioacchino Del Regno
In prepration for adding the IOMMUs and LARBs of this SoC, add the VDECSYS and VENCSYS clock controller nodes, providing clocks for the vcodec stateful decoder and stateful decoder hardware. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230327083647.22017-11-angelogioacchino.delregno@collabora.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
generated by cgit (git 2.34.1) at 2025-09-23 15:00:54 +0000