summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-03-27can: mcp251x: Remove redundant spi driver bus initializationLars-Peter Clausen
In ancient times it was necessary to manually initialize the bus field of an spi_driver to spi_bus_type. These days this is done in spi_driver_register() so we can drop the manual assignment. The patch was generated using the following coccinelle semantic patch: // <smpl> @@ identifier _driver; @@ struct spi_driver _driver = { .driver = { - .bus = &spi_bus_type, }, }; // </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2013-03-27can: Kconfig: CAN_AT91 depends on ARMLudovic Desroches
SAMA5D3 devices also embed CAN feature. Moreover if we want to produce a single kernel image it is not useful to be too restrictive. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2013-03-27can: at91_can: add dt supportLudovic Desroches
Add device tree support. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2013-03-27e1000e: Add missing dma_mapping_error-call in e1000_alloc_jumbo_rx_buffersChristoph Paasch
After dma_map_page, dma_mapping_error must be called. It seems safe to not free the skb/page allocated in this function, as the skb/page can be reused later. Signed-off-by: Christoph Paasch <christoph.paasch@uclouvain.be> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-03-27gpio: stmpe: pass DT node to irqdomainGabriel Fernandez
The irq domain was implemented but the device tree node was not transmitted to irq_domain_add_simple(). Cc: stable@vger.kernel.org Signed-off-by: Gabriel Fernandez <gabriel.fernandez@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-27ixgb: Add missing dma_mapping_error-call in ixgb_alloc_rx_buffersChristoph Paasch
After dma_map_single, dma_mapping_error must be called. It seems safe to not free the skb allocated in this function, as the skb can be reused later. Additionally this patch fixes one coding-style error. Signed-off-by: Christoph Paasch <christoph.paasch@uclouvain.be> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-03-27e1000: ethtool: Add missing dma_mapping_error-call in e1000_setup_desc_ringsChristoph Paasch
After dma_map_single, dma_mapping_error must be called. Signed-off-by: Christoph Paasch <christoph.paasch@uclouvain.be> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-03-27batman-adv: use seq_puts instead of seq_printf when the format is constantAntonio Quartulli
As reported by checkpatch, seq_puts has to be preferred with respect to seq_printf when the format is a constant string (no va_args) Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-03-27batman-adv: update Makefile copyright yearsAntonio Quartulli
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-03-27batman-adv: Start new development cycleSimon Wunderlich
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-03-27batman-adv: free an hard-interface before adding itAntonio Quartulli
When adding a new hard interface (e.g. wlan0) to a soft interface (e.g. bat0) and the former is already enslaved in another virtual interface (e.g. a software bridge) batman-adv has to free it first and then continue with the adding mechanism. In this way the behaviour becomes consistent with what "ip link set master" does. At the moment batman-adv enslaves the hard interface without checking for the master device, possibly causing strange behaviours which are never wanted by the users. Reported-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-03-27batman-adv: Allow to modify slaves of soft-interfaces through rntl_linkSven Eckelmann
The sysfs configuration interface of batman-adv to add/remove slaves of an soft-iface is not deadlock free and doesn't follow the currently common way to modify slaves of an interface. An additional configuration interface though rtnl_link is introduced which provides easy device adding/removing with tools like "ip": $ ip link set dev eth0 master bat0 $ ip link set dev eth0 nomaster Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-03-27batman-adv: Allow to use rntl_link for device creation/deletionSven Eckelmann
The sysfs configuration interface of batman-adv to add/remove soft-interfaces is not deadlock free and doesn't follow the currently common way to create new virtual interfaces. An additional interface though rtnl_link is introduced which provides easy device creation/deletion with tools like "ip": $ ip link add dev bat0 type batadv $ ip link del dev bat0 Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-03-27batman-adv: rename batadv_softif_destroy to reflect sysfs use caseMarek Lindner
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> CC: Sven Eckelmann <sven@narfation.org> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-03-27batman-adv: Don't always delete softif when last slave was removedSven Eckelmann
batman-adv has an unusual way to manage softinterfaces. These will be created automatically when a user writes to the batman-adv/mesh_iface file in sysfs and removed when no slave device exists anymore. This behaviour cannot be changed without breaking compatibility with existing code. Instead other interfaces should be able to slightly reduce this behaviour and provide a more common reaction to a removal of a slave interface. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-03-27batman-adv: Move deinitialization of soft-interface to destructorSven Eckelmann
The deinitialization of the soft-interface created in ndo_init/constructor should be done in the destructor and not directly before calling unregister_netdevice Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-03-27batman-adv: Move soft-interface initialization to ndo_initSven Eckelmann
The initialization of an net_device object should be done in the init/constructor function and not from the outside after the register_netdevice was done to avoid race conditions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-03-27batman-adv: Fix endianness errors for network codingMartin Hundebøll
Add a htonl() in network_coding.c when reading the sequence number from received ogm_packet, to avoid wrong byte ordering when comparing with a host value. This bug was introduced in 3ed7ada3f0bbcd058567bc0a8f9729a73eba7db6 ("batman-adv: network coding - detect coding nodes and remove these after timeout"). Change the type of coded_packet->coded_len from uint16 to __be16 to avoid wrong assumptions about endianness in later uses. Introduced in c3289f3650d34b60296000a629c99f2488f7c3dd ("batman-adv: network coding - code and transmit packets if possible"). Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-03-27iommu/amd: Make sure dma_ops are set for hotplug devicesJoerg Roedel
There is a bug introduced with commit 27c2127 that causes devices which are hot unplugged and then hot-replugged to not have per-device dma_ops set. This causes these devices to not function correctly. Fixed with this patch. Cc: stable@vger.kernel.org Reported-by: Andreas Degert <andreas.degert@googlemail.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2013-03-27gpio-ich: Fix value returned by ichx_gpio_requestJean Delvare
Per Documentation/gpio.txt, gpio_request callbacks should return 0 on success or a negative value on error. So it is not clear what was meant by letting ichx_gpio_request return 1 in some cases, nor how a caller would interpret it. Align the code with the comment above it and consider pins as available by default. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Grant Likely <grant.likely@secretlab.ca> Acked-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-26ARM: OMAP: clocks: Delay clk inits atleast until slab is initializedRajendra Nayak
clk inits on OMAP happen quite early, even before slab is available. The dependency comes from the fact that the timer init code starts to use clocks and hwmod and we need clocks to be initialized by then. There are various problems doing clk inits this early, one is, not being able to do dynamic clk registrations and hence the dependency on clk-private.h. The other is, inability to debug early kernel crashes without enabling DEBUG_LL and earlyprintk. Doing early clk init also exposed another instance of a kernel panic due to a BUG() when CONFIG_DEBUG_SLAB is enabled. [ 0.000000] Kernel BUG at c01174f8 [verbose debug info unavailable] [ 0.000000] Internal error: Oops - BUG: 0 [#1] SMP ARM [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 Not tainted (3.9.0-rc1-12179-g72d48f9 #6) [ 0.000000] PC is at __kmalloc+0x1d4/0x248 [ 0.000000] LR is at __clk_init+0x2e0/0x364 [ 0.000000] pc : [<c01174f8>] lr : [<c0441f54>] psr: 600001d3 [ 0.000000] sp : c076ff28 ip : c065cefc fp : c0441f54 [ 0.000000] r10: 0000001c r9 : 000080d0 r8 : c076ffd4 [ 0.000000] r7 : c074b578 r6 : c0794d88 r5 : 00000040 r4 : 00000000 [ 0.000000] r3 : 00000000 r2 : c07cac70 r1 : 000080d0 r0 : 0000001c [ 0.000000] Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel [ 0.000000] Control: 10c53c7d Table: 8000404a DAC: 00000017 [ 0.000000] Process swapper (pid: 0, stack limit = 0xc076e240) [ 0.000000] Stack: (0xc076ff28 to 0xc0770000) [ 0.000000] ff20: 22222222 c0794ec8 c06546e8 00000000 00000040 c0794d88 [ 0.000000] ff40: c074b578 c076ffd4 c07951c8 c076e000 00000000 c0441f54 c074b578 c076ffd4 [ 0.000000] ff60: c0793828 00000040 c0794d88 c074b578 c076ffd4 c0776900 c076e000 c07272ac [ 0.000000] ff80: 2f800000 c074c968 c07f93d0 c0719780 c076ffa0 c076ff98 00000000 00000000 [ 0.000000] ffa0: 00000000 00000000 00000000 00000001 c074cd6c c077b1ec 8000406a c0715724 [ 0.000000] ffc0: 00000000 00000000 00000000 00000000 00000000 c074c968 10c53c7d c0776974 [ 0.000000] ffe0: c074cd6c c077b1ec 8000406a 411fc092 00000000 80008074 00000000 00000000 [ 0.000000] [<c01174f8>] (__kmalloc+0x1d4/0x248) from [<c0441f54>] (__clk_init+0x2e0/0x364) [ 0.000000] [<c0441f54>] (__clk_init+0x2e0/0x364) from [<c07272ac>] (omap4xxx_clk_init+0xbc/0x140) [ 0.000000] [<c07272ac>] (omap4xxx_clk_init+0xbc/0x140) from [<c0719780>] (setup_arch+0x15c/0x284) [ 0.000000] [<c0719780>] (setup_arch+0x15c/0x284) from [<c0715724>] (start_kernel+0x7c/0x334) [ 0.000000] [<c0715724>] (start_kernel+0x7c/0x334) from [<80008074>] (0x80008074) [ 0.000000] Code: e5883004 e1a00006 e28dd00c e8bd8ff0 (e7f001f2) [ 0.000000] ---[ end trace 1b75b31a2719ed1c ]--- [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task! It was a know issue, that slab allocations would fail when common clock core tries to cache parent pointers for mux clocks on OMAP, and hence a patch 'clk: Allow late cache allocation for clk->parents, commit 7975059d' was added to work this problem around. A BUG() within kmalloc() with CONFIG_DEBUG_SLAB enabled was completely overlooked causing this regression. More details on the issue reported can be found here, http://www.mail-archive.com/linux-omap@vger.kernel.org/msg85932.html With all these issues around clk inits happening way too early, it makes sense to at least move them to a point where dynamic memory allocations are possible. So move them to a point just before the timer code starts using clocks and hwmod. This should at least pave way for clk inits on OMAP moving to dynamic clock registrations instead of using the static macros defined in clk-private.h. The issue with kernel panic while CONFIG_DEBUG_SLAB is enabled was reported by Piotr Haber and Tony Lindgren and this patch fixes the reported issue as well. Reported-by: Piotr Haber <phaber@broadcom.com> Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Mike Turquette <mturquette@linaro.org> Acked-by: Paul Walmsley <paul@pwsan.com> Cc: stable@vger.kernel.org # v3.8 Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-03-276lowpan: use IEEE802154_ADDR_LEN instead of a magic numberTony Cheneau
Signed-off-by: Tony Cheneau <tony.cheneau@amnesiak.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-276lowpan: fix a small formatting issueTony Cheneau
This formatting issue was introduced with commit d4ac32365dcbfd341a87eae444c26679f889249a Signed-off-by: Tony Cheneau <tony.cheneau@amnesiak.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-27ieee802154/at86rf230: Fix register names for RX_AACK_ON and TX_ARET_ONstefan@datenfreihafen.org
The register names have been wrong since the beginning but it only showed up now as they are actualy used for the upcoming auto ACK support. Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-27ieee802154/at86rf230: Implement hardware address filter callback.stefan@datenfreihafen.org
Implement the filter function to update short address, pan id and ieee address on change. Allowing for hardware address filtering needed for auto ACK. Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-27ieee802154/dgram: Pass source address in dgram_recvmsgStephen Röttger
This patch lets dgram_recvmsg fill in the sockaddr struct in msg->msg_name with the source address of the packet. This is used by the userland functions recvmsg and recvfrom to get the senders address. [Stefan: Changed from old zigbee legacy tree to mainline] Signed-off-by: Stephen Röttger <stephen.roettger@zero-entropy.de> Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-27VXLAN: Fix sparse warnings.Pravin B Shelar
Fixes following warning:- drivers/net/vxlan.c:471:35: warning: symbol 'dev' shadows an earlier one drivers/net/vxlan.c:433:26: originally declared here drivers/net/vxlan.c:794:34: warning: symbol 'vxlan' shadows an earlier one drivers/net/vxlan.c:757:26: originally declared here CC: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fixes from Al Viro: "stable fodder; assorted deadlock fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: vt: synchronize_rcu() under spinlock is not nice... Nest rename_lock inside vfsmount_lock Don't bother with redoing rw_verify_area() from default_file_splice_from()
2013-03-26vt: synchronize_rcu() under spinlock is not nice...Al Viro
vcs_poll_data_free() calls unregister_vt_notifier(), which calls atomic_notifier_chain_unregister(), which calls synchronize_rcu(). Do it *after* we'd dropped ->f_lock. Cc: stable@vger.kernel.org (all kernels since 2.6.37) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-27PCI / ACPI: hold acpi_scan_lock during root bus hotplugYinghai Lu
During merging the PCI tree with the PM/ACPI tree, Linus noticed that we don't use the same lock using patten about ACPI PCI root as acpiphp. Here apply the same locking patten, and we need to execute acpi_bus_hot_remove_device() via acpi_os_hotplug_execute() as it also holds acpi_scan_lock. [rjw: Changelog] Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Yinghai Lu <yinghai@kernel.org> No-objection-from: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-27ACPI / APEI: fix error status check condition for CPERChen Gong
In Table 18-289, ACPI5.0 SPEC, the error data length in CPER Generic Error Data Entry can be 0, which means this generic error data entry can have only one header. So fix the check conditon for it. Signed-off-by: Chen Gong <gong.chen@linux.intel.com> Reviewed-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-27ACPI / PM: fix suspend and resume on Sony Vaio VGN-FW21MFabio Valentini
Add Sony Vaio VGN-FW21M to the device blacklist in drivers/acpi/sleep.c. Fixes suspend/resume on this device (device no longer reboots instead of resuming). References: https://bugzilla.kernel.org/show_bug.cgi?id=55001 Signed-off-by: Fabio Valentini <fafatheone@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-26Nest rename_lock inside vfsmount_lockAl Viro
... lest we get livelocks between path_is_under() and d_path() and friends. The thing is, wrt fairness lglocks are more similar to rwsems than to rwlocks; it is possible to have thread B spin on attempt to take lock shared while thread A is already holding it shared, if B is on lower-numbered CPU than A and there's a thread C spinning on attempt to take the same lock exclusive. As the result, we need consistent ordering between vfsmount_lock (lglock) and rename_lock (seq_lock), even though everything that takes both is going to take vfsmount_lock only shared. Spotted-by: Brad Spengler <spender@grsecurity.net> Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-26drm/i915: Be sure to turn hsync/vsync back on at crt enable (v2)Adam Jackson
commit f40ebd6bcbbd0d30591f42dc16be52b5086a366b Author: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Date: Tue Mar 5 14:24:48 2013 +0100 drm/i915: Turn off hsync and vsync on ADPA when disabling crt properly disabled the hsync/vsync logic at disable time, but neglected to re-enable them at enable time. v2: In the enable hook, restore the connector's expected DPMS level instead of forcing ON. Do this by stashing a back pointer to the connector in the crt (suggested by danvet) since otherwise it's awkward to look up. Signed-off-by: Adam Jackson <ajax@redhat.com> Cc: stable@vger.kernel.org [danvet: Added more verbose commit citation and cc: stable tag. Also, make it compile. Then self-lart and try to assign the right pointer.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Always increment IPV4 ID field in encapsulated GSO packets, even when DF is set. Regression fix from Pravin B Shelar. 2) Fix per-net subsystem initialization in netfilter conntrack, otherwise we may access dynamically allocated memory before it is actually allocated. From Gao Feng. 3) Fix DMA buffer lengths in iwl3945 driver, from Stanislaw Gruszka. 4) Fix race between submission of sync vs async commands in mwifiex driver, from Amitkumar Karwar. 5) Add missing cancel of command timer in mwifiex driver, from Bing Zhao. 6) Missing SKB free in rtlwifi USB driver, from Jussi Kivilinna. 7) Thermal layer tries to use a genetlink multicast string that is longer than the 16 character limit. Fix it and add a BUG check to prevent this kind of thing from happening in the future. From Masatake YAMATO. 8) Fix many bugs in the handling of the teardown of L2TP connections, UDP encapsulation instances, and sockets. From Tom Parkin. 9) Missing socket release in IRDA, from Kees Cook. 10) Fix fec driver modular build, from Fabio Estevam. 11) Erroneous use of kfree() instead of free_netdev() in lantiq_etop, from Wei Yongjun. 12) Fix bugs in handling of queue numbers and steering rules in mlx4 driver, from Moshe Lazer, Hadar Hen Zion, and Or Gerlitz. 13) Some FOO_DIAG_MAX constants were defined off by one, fix from Andrey Vagin. 14) TCP segmentation deferral is unintentionally done too strongly, breaking ACK clocking. Fix from Eric Dumazet. 15) net_enable_timestamp() can legitimately be invoked from software interrupts, and in a way that is safe, so remove the WARN_ON(). Also from Eric Dumazet. 16) Fix use after free in VLANs, from Cong Wang. 17) Fix TCP slow start retransmit storms after SACK reneging, from Yuchung Cheng. 18) Unix socket release should mark a socket dead before NULL'ing out sock->sk, otherwise we can race. Fix from Paul Moore. 19) IPV6 addrconf code can try to free static memory, from Hong Zhiguo. 20) Fix register mis-programming, NULL pointer derefs, and wrong PHC clock frequency in IGB driver. From Lior LevyAlex Williamson, Jiri Benc, and Jeff Kirsher. 21) skb->ip_summed logic in pch_gbe driver is reversed, breaking packet forwarding. Fix from Veaceslav Falico. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (65 commits) ipv4: Fix ip-header identification for gso packets. bonding: remove already created master sysfs link on failure af_unix: dont send SCM_CREDENTIAL when dest socket is NULL pch_gbe: fix ip_summed checksum reporting on rx igb: fix PHC stopping on max freq igb: make sensor info static igb: SR-IOV init reordering igb: Fix null pointer dereference igb: fix i350 anti spoofing config ixgbevf: don't release the soft entries ipv6: fix bad free of addrconf_init_net unix: fix a race condition in unix_release() tcp: undo spurious timeout after SACK reneging bnx2x: fix assignment of signed expression to unsigned variable bridge: fix crash when set mac address of br interface 8021q: fix a potential use-after-free net: remove a WARN_ON() in net_enable_timestamp() tcp: preserve ACK clocking in TSO net: fix *_DIAG_MAX constants net/mlx4_core: Disallow releasing VF QPs which have steering rules ...
2013-03-26Merge tag 'nfs-for-3.9-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client bugfixes from Trond Myklebust: - Fix an NFSv4 idmapper regression - Fix an Oops in the pNFS blocks client - Fix up various issues with pNFS layoutcommit - Ensure correct read ordering of variables in rpc_wake_up_task_queue_locked * tag 'nfs-for-3.9-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: SUNRPC: Add barriers to ensure read ordering in rpc_wake_up_task_queue_locked NFSv4.1: Add a helper pnfs_commit_and_return_layout NFSv4.1: Always clear the NFS_INO_LAYOUTCOMMIT in layoutreturn NFSv4.1: Fix a race in pNFS layoutcommit pnfs-block: removing DM device maybe cause oops when call dev_remove NFSv4: Fix the string length returned by the idmapper
2013-03-26Merge tag 'for-usb-linus-2013-03-26' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-linus Misc xHCI fixes for 3.9 Hi Greg, Here's a couple of fixes for the xHCI driver. Three patches are nothing major: build warning fix, macro field width fix, and removing some unnecessary log spam. The only interesting thing here is Tianyu's two patches to fix the USB port connection type discovery, for the USB port power off mechanism. This adds new USB host API, but as discussed, it's necessary to avoid powering off the wrong USB port. It's not marked for backport to stable kernels, since the sysfs mechanism to manually power off a port didn't go in until 3.9. I've smoke tested these, including system suspend, USB device suspend, and rocking out in my cube with a pair of USB headphones. They look fine to me. Hibernate is currently broken on my system, due to some nouveau MMIO read faults. I'll report that separately. Sarah Sharp
2013-03-26rsxx: remove unused variablePhilip J Kelleher
Signed-off-by: Philip J Kelleher <pjk1939@linux.vnet.ibm.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-03-26rsxx: enable error return of rsxx_eeh_save_issued_dmas()Philip J Kelleher
Commit d8d595df introduced a bug where we did not check for a NULL return from kmalloc(). Make rsxx_eeh_save_issued_dmas() return an error for that case, and make the callers handle that. Signed-off-by: Philip J Kelleher <pjk1939@linux.vnet.ibm.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-03-26nfsd4: reject "negative" acl lengthsJ. Bruce Fields
Since we only enforce an upper bound, not a lower bound, a "negative" length can get through here. The symptom seen was a warning when we attempt to a kmalloc with an excessive size. Reported-by: Toralf Förster <toralf.foerster@gmx.de> Cc: stable@kernel.org Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2013-03-26yama: Better permission check for ptracemeEric W. Biederman
Change the permission check for yama_ptrace_ptracee to the standard ptrace permission check, testing if the traceer has CAP_SYS_PTRACE in the tracees user namespace. Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-03-26ipv4: Fix ip-header identification for gso packets.Pravin B Shelar
ip-header id needs to be incremented even if IP_DF flag is set. This behaviour was changed in commit 490ab08127cebc25e3a26 (IP_GRE: Fix IP-Identification). Following patch fixes it so that identification is always incremented. Reported-by: Cong Wang <amwang@redhat.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-26Btrfs: fix race between mmap writes and compressionChris Mason
Btrfs uses page_mkwrite to ensure stable pages during crc calculations and mmap workloads. We call clear_page_dirty_for_io before we do any crcs, and this forces any application with the file mapped to wait for the crc to finish before it is allowed to change the file. With compression on, the clear_page_dirty_for_io step is happening after we've compressed the pages. This means the applications might be changing the pages while we are compressing them, and some of those modifications might not hit the disk. This commit adds the clear_page_dirty_for_io before compression starts and makes sure to redirty the page if we have to fallback to uncompressed IO as well. Signed-off-by: Chris Mason <chris.mason@fusionio.com> Reported-by: Alexandre Oliva <oliva@gnu.org> cc: stable@vger.kernel.org
2013-03-26bonding: remove already created master sysfs link on failureVeaceslav Falico
If slave sysfs symlink failes to be created - we end up without removing the master sysfs symlink. Remove it in case of failure. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-26MAINTAINERS: Update qlge maintainers listShahed Shaikh
Add myself to qlge maintainers list. Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-26net: fec: TX Buffer incorrectly initializedJim Baxter
The TX Buffer in fec_enet_alloc_buffers was being initialized with the receive register define BD_ENET_RX_INT instead of the transmit register define BD_ENET_TX_INT Signed-off-by: Jim Baxter <jim_baxter@mentor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-26Merge branch 'stmmac'David S. Miller
Giuseppe CAVALLARO says: ==================== These patches enhance the driver adding the PTP support and the initial code for RGMII/SGMII/TBI/RTBI modes. Also this patches review the driver removing some Koption for selecting between chain and ring modes. REally useful to validate the driver also at build time. Before adding PTP, the extended descriptor support has been added because it is mandatory to save HW timestamp in new dedicated descriptors. Also in this case no Koption added. Concerning the PTP, I have hacked/reviewed and tested many part of these patches also verifying the back compatibility on several HW and chips. Concerning the SGMII/RGMII we have already discussed about the support in the net.dev Mailing list with Byungho where these patchs were partially analysed. So I have only ported them against the latest net-next (and on top of PTP). I have added some missing things: e.g. some parts of the ethtool for ANE. As we clarified with Byungho, we will add further enhancements on top of these patches if needed. I have also built all against ARM/SH/X68 platforms and no issues on ST-Boxes. Thx goes to Rayagond that wrote and tested the PTP and to Byungho for SGMII. V2: This Version 2 has the fixes discussed in the ML, for example: o completely remove the Koption... all the decisions are made at probe time o review the PTP patches and better organize them just in two patches o added all the fixes provided by Richard on PTP and CLK driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-26stmmac: update the Doc and Version (PTP+SGMII)Giuseppe CAVALLARO
This patch updates the stmmac.txt file adding information related to the PTP and SGMII/RGMII supports. Also the patch updates the driver version to: March_2013. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-26stmmac: add the support for PTP hw clock driverRayagond Kokatanur
This patch implements PHC (ptp hardware clock) driver for stmmac driver to support 1588 PTP. V2: added support for FINE method, reduced loop delay and review spinlock. Signed-off-by: Rayagond Kokatanur <rayagond@vayavyalabs.com> Hacked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-26stmmac: add IEEE PTPv1 and PTPv2 support.Rayagond Kokatanur
This patch enhances the stmmac driver to support IEEE 1588-2002 PTP (Precision Time Protocol) version 1 and IEEE 1588-2008 PPT version 2. Precision Time Protocol(PTP),which enables precise synchronization of clocks in measurement and control systems implemented with technologies such as network communication,local computing, & distributed objects. Both PTPv1 and PTPv2 is selected at run-time using the HW capability register. The PTPv1 TimeStamp support can be used on chips that have the normal descriptor structures and PTPv2 TimeStamp support can be used on chips that have the Extended descriptors(DES4-5-6-7). All such sanity checks are done and verified by using HW capability register. V2: in this version the ethtool support has been included in this patch; Koptions have been completely removed (previously added to select PTP and PTPv2). PTPv1 and PTPv2 is now added in a single patch instead of two patches. get_timestamp() and get_systemtime() L/H have been combined into single APIs. Signed-off-by: Rayagond Kokatanur <rayagond@vayavyalabs.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>