summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-10-25[S390] zero page cache synonymsMartin Schwidefsky
If the zero page is mapped to virtual user space addresses that differ only in bit 2^12 or 2^13 we get L1 cache synonyms which can affect performance. Follow the mips model and use multiple zero pages to avoid the synonyms. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25uwb: Orphan the UWB and WUSB subsystemsDavid Vrabel
I'm no longer in a position to be the maintainer for the Ultra-Wide Band (UWB) and Ceritified Wireless USB (WUSB) subsystems and no one else has volunteered to take over. Signed-off-by: David Vrabel <david.vrabel@csr.com>
2010-10-25uwb: Remove the WLP subsystem and driversDavid Vrabel
The only Wimedia LLC Protocol (WLP) hardware was an Intel i1480 chip with a beta release of firmware that was never commercially available as a product. This hardware and firmware is no longer available as Intel sold their UWB/WLP IP. I also see little prospect of other WLP capable hardware ever being available. Signed-off-by: David Vrabel <david.vrabel@csr.com>
2010-10-25Blackfin: ppi/spi/twi headers: add missing __BFP undefMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-25Blackfin: update defconfigsMike Frysinger
- enable pm for ADI boards - drop security option as no one uses it - enable uninitialized mmap for everyone - disable wireless by default as no one uses it - disable cfq io sched as noop is fine Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-25Blackfin: bfin_twi.h: start a common TWI headerMike Frysinger
Start one place for TWI definitions. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-25netdev: bfin_mac: push settings to platform resourcesSonic Zhang
Move all the pin settings out of the Kconfig and into the platform resources (MII vs RMII). This clean up also lets us push out the phy settings so that board porters may control the layout. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-25Merge branch 'topic/hda' into for-linusTakashi Iwai
2010-10-25ALSA: hda - Disable sticky PCM stream assignment for AD codecsTakashi Iwai
The sticky PCM stream assignment introduced in 2.6.36 kernel seems causing problems on AD codecs. At some time later, the streaming no longer works by unknown reason. A simple workaround is to disable sticky-assignment for these codecs. Tested-by: Vasily Khoruzhick <anarsoul@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-25Merge branch 'topic/asoc' into for-linusTakashi Iwai
Conflicts: arch/powerpc/platforms/85xx/p1022_ds.c
2010-10-25Merge branch 'topic/misc' into for-linusTakashi Iwai
2010-10-25Merge branch 'ec-param' into releaseLen Brown
2010-10-25Merge branch 'pnp-log' into releaseLen Brown
2010-10-25Merge branch 'pnpacpi-invalid-device-id' into releaseLen Brown
2010-10-25Merge branch 'power-refcount' into releaseLen Brown
2010-10-25Merge branch 'cleanup' into releaseLen Brown
2010-10-25Merge branch 'gpe-defer' into releaseLen Brown
2010-10-25Merge branch 'battery' into releaseLen Brown
2010-10-25Merge branch 'acpi_pm_device_sleep_state' into releaseLen Brown
2010-10-25Merge branches 'bugzilla-15807', 'bugzilla-15979-v2' and 'bugzilla-19162' ↵Len Brown
into release
2010-10-25Merge branch 'procfs-cleanup-v2' into releaseLen Brown
2010-10-25Merge branch 'acpica' into releaseLen Brown
Conflicts: drivers/acpi/acpica/aclocal.h Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-24IB/srp: Sync buffer before posting sendDavid Dillow
srp_send_tsk_mgmt() was missing the proper DMA sync calls before posting the buffer to the device. Signed-off-by: David Dillow <dillowda@ornl.gov> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-24IB/srp: Use list_first_entry()Bart Van Assche
Use the list_first_entry() macro in ib_srp instead of open-coding the equivalent, which makes the source code slightly more descriptive. The list_first_entry() macro itself was introduced in kernel 2.6.22. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: David Dillow <dillowda@ornl.gov> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-24IB/srp: Reduce number of BUSY conditionsBart Van Assche
As proposed by the SRP (draft) standard, ib_srp reserves one ring element for SRP_TSK_MGMT requests. This patch makes sure that the SCSI mid-layer never tries to queue more than (SRP request limit) - 1 SCSI commands to ib_srp. This improves performance for targets whose request limit is less than or equal to SRP_NORMAL_REQ_SQ_SIZE by reducing the number of BUSY responses reported by ib_srp to the SCSI mid-layer. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: David Dillow <dillowda@ornl.gov> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-24IB/srp: Eliminate two forward declarationsDavid Dillow
Signed-off-by: David Dillow <dillowda@ornl.gov> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-24Merge branch 'next' into for-linusDmitry Torokhov
2010-10-24Input: wacom - specify Cinitq supported toolsPing Cheng
Cintiq, being a display tablet, doesn't have mouse and associated BTN_s. Make sure we do not specify them when registering Cintiq's input device so that userland can retrieve the exact tool set the device supports. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-24Input: ab8500-ponkey - fix IRQ freeing in error pathNicolas Kaiser
Looks like an obvious typo to me. Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-24ACPI: Page based coalescing of I/O remappings optimizationMyron Stowe
This patch optimizes ACPI MMIO remappings by keeping track of the remappings on a PAGE_SIZE granularity. When an ioremap() occurs, the underlying infrastructure works on a 'page' based granularity. As such, an ioremap() request for 1 byte for example, will end up mapping in an entire (PAGE_SIZE) page. Huang Ying took advantage of this in commit 15651291a2f8c11e7e6a42d8bfde7a213ff13262 by checking if subsequent ioremap() requests reside within any of the list's existing remappings still in place, and if so, incrementing a reference count on the existing mapping as opposed to performing another ioremap(). Signed-off-by: Myron Stowe <myron.stowe@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-24ACPI: Convert simple locking to RCU based lockingMyron Stowe
Convert the simple locking introduced earlier for the ACPI MMIO remappings list to an RCU based locking scheme. Signed-off-by: Myron Stowe <myron.stowe@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-24ACPI: Pre-map 'system event' related register blocksMyron Stowe
During ACPI initialization, pre-map fixed hardware registers that are accessed during ACPI's 'system event' related IRQ handing. ACPI's 'system event' handing accesses specific fixed hardware registers; namely PM1a event, PM1b event, GPE0, and GPE1 register blocks which are declared within the FADT. If these registers are backed by MMIO, as opposed to I/O port space, accessing them within interrupt context will cause a panic as acpi_os_read_memory() depends on ioremap() in such cases - BZ 18012. By utilizing the functionality provided in the previous two patches - ACPI: Maintain a list of ACPI memory mapped I/O remappings, and, ACPI: Add interfaces for ioremapping/iounmapping ACPI registers - accesses to ACPI MMIO areas will now be safe from within interrupt contexts (IRQ and/or NMI) provided the area was pre-mapped. This solves BZ 18012. ACPI "System Event" reference(s): ACPI Specification, Revision 4.0, Section 3 "ACPI Overview", 3.8 "System Events", 5.6 "ACPI Event Programming Model". Reference: https://bugzilla.kernel.org/show_bug.cgi?id=18012 Reported-by: <bjorn.helgaas@hp.com> Signed-off-by: Myron Stowe <myron.stowe@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-24ACPI: Add interfaces for ioremapping/iounmapping ACPI registersMyron Stowe
Add remapping and unmapping interfaces for ACPI registers that are backed by memory mapped I/O (MMIO). These interfaces, along with the MMIO remapping list, enable accesses of such registers from within interrupt context. ACPI Generic Address Structure (GAS) reference (ACPI's fixed/generic hardware registers use the GAS format): ACPI Specification, Revision 4.0, Section 5.2.3.1, "Generic Address Structure". Signed-off-by: Myron Stowe <myron.stowe@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-24ACPI: Maintain a list of ACPI memory mapped I/O remappingsMyron Stowe
For memory mapped I/O (MMIO) remappings, add a list to maintain the remappings and augment the corresponding mapping and unmapping interface routines (acpi_os_map_memory() and acpi_os_unmap_memory()) to dynamically add to, and delete from, the list. The current ACPI I/O accessing methods - acpi_read() and acpi_write() - end up calling ioremap() when accessing MMIO. This prevents use of these methods within interrupt context (IRQ and/or NMI), since ioremap() may block to allocate memory. Maintaining a list of MMIO remappings enables accesses to such areas from within interrupt context provided they have been pre-mapped. Signed-off-by: Myron Stowe <myron.stowe@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-24ACPI: Fix ioremap size for MMIO reads and writesMyron Stowe
The size used for I/O remapping MMIO read and write accesses has not accounted for the basis of ACPI's Generic Address Structure (GAS) 'Register Bit Width' field which is bits, not bytes. This patch adjusts the ioremap() 'size' argument accordingly. ACPI "Generic Register" reference: ACPI Specification, Revision 4.0, Section 5.2.3.1, "Generic Address Structure". Signed-off-by: Myron Stowe <myron.stowe@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-25sh: i2c-sh7760: Replase from ctrl_* to __raw_*Nobuhiro Iwamatsu
ctrl_* is deprecated. We should to use __raw_*. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-24nfsd4: fix connection allocation in sequence()J. Bruce Fields
We're doing an allocation under a spinlock, and ignoring the possibility of allocation failure. A better fix wouldn't require an unnecessary allocation in the common case, but we'll leave that for later. Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-10-24NFSv4.1: Use more sensible names for 'initialize_mountpoint'Trond Myklebust
The initialize_mountpoint/uninitialise_mountpoint functions are really about setting or clearing the layout driver to be used on this filesystem. Change the names to the more descriptive 'set_layoutdriver/clear_layoutdriver'. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-10-24NFSv4.1: pnfs: filelayout: add driver's LAYOUTGET and GETDEVICEINFO ↵Andy Adamson
infrastructure Implement the driver's io_ops->alloc_lseg and free_lseg functions, which integrate into the deviceid cache and calls out to nfs4_proc_getdeviceinfo when necessary. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Dean Hildebrand <dhildebz@umich.edu> Signed-off-by: Marc Eshel <eshel@almaden.ibm.com> Signed-off-by: Mike Sager <sager@netapp.com> Signed-off-by: Oleg Drokin <green@linuxhacker.ru> Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com> Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-10-24NFSv4.1: pnfs: add LAYOUTGET and GETDEVICEINFO infrastructureAndy Adamson
Add the ability to actually send LAYOUTGET and GETDEVICEINFO. This also adds in the machinery to handle layout state and the deviceid cache. Note that GETDEVICEINFO is not called directly by the generic layer. Instead it is called by the drivers while parsing the LAYOUTGET opaque data in response to an unknown device id embedded therein. RFC 5661 only encodes device ids within the driver-specific opaque data. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Dean Hildebrand <dhildebz@umich.edu> Signed-off-by: Marc Eshel <eshel@almaden.ibm.com> Signed-off-by: Mike Sager <sager@netapp.com> Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com> Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-10-24NFS: client needs to maintain list of inodes with active layoutsAndy Adamson
In particular, server reboot will invalidate all layouts. Note that in order to have an active layout, we must get a successful response from the server. To avoid adding that machinery, this patch just includes a stub that fakes up a successful return. Since the layout is never referenced for io, this is not a problem. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Dean Hildebrand <dhildebz@umich.edu> Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-10-24NFS: create and destroy inode's layout cacheBenny Halevy
At the start of the io paths, try to grab the relevant layout information. This will initiate the inode's layout cache, but stubs ensure the cache stays empty. Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Dean Hildebrand <dhildebz@umich.edu> Signed-off-by: Marc Eshel <eshel@almaden.ibm.com> Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn> Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-10-24NFSv4.1: pnfs: filelayout: introduce minimal file layout driverDean Hildebrand
This driver just registers itself and supplies trivial mount/umount functions. Signed-off-by: Dean Hildebrand <dhildebz@umich.edu> Signed-off-by: Marc Eshel <eshel@almaden.ibm.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-10-24NFSv4.1: pnfs: full mount/umount infrastructureFred Isaman
Allow a module implementing a layout type to register, and have its mount/umount routines called for filesystems that the server declares support it. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Marc Eshel <eshel@almaden.ibm.com> Signed-off-by: Andy Adamson<andros@netapp.com> Signed-off-by: Bian Naimeng <biannm@cn.fujitsu.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-10-24NFS: set layout driverRicardo Labiaga
Put in the infrastructure that uses information returned from the server at mount to select a layout driver module. In this patch, a stub is used that always returns "no driver found". Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Dean Hildebrand <dhildebz@umich.edu> Signed-off-by: Marc Eshel <eshel@almaden.ibm.com> Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-10-24NFS: ask for layouttypes during v4 fsinfo callAndy Adamson
This information will be used to determine which layout driver, if any, to use for subsequent IO on this filesystem. Each driver is assigned an integer id, with 0 reserved to indicate no driver. The server can in theory return multiple ids. However, our current client implementation only notes the first entry and ignores the rest. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-10-24NFS: change stateid to be a unionAlexandros Batsakis
In NFSv4.1 the stateid consists of the other and seqid fields. For layout processing we need to numerically compare the seqid value of layout stateids. To do so, introduce a union to nfs4_stateid to switch between opaque(16 bytes) and opaque(12 bytes) / __be32 Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-10-24NFSv4.1: pnfsd, pnfs: protocol level pnfs constantsDean Hildebrand
Use only layoutreturn constant for both returns and recalls. (return_* works better for recall_type rather the other way around) Signed-off-by: Dean Hildebrand <dhildebz@umich.edu> Signed-off-by: Marc Eshel <eshel@almaden.ibm.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-10-24SUNRPC: define xdr_decode_opaque_fixedBenny Halevy
A helper for decoding a fixed length opaque value. Returns a pointer to the next item in the xdr stream. Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-10-24NFSD: remove duplicate NFS4_STATEID_SIZEAndy Adamson
Already accepted by Bruce Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
generated by cgit (git 2.34.1) at 2025-10-01 10:17:50 +0000