summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-01-01net: ethtool: Allow passing a phy index for some commandsMaxime Chevallier
Some netlink commands are target towards ethernet PHYs, to control some of their features. As there's several such commands, add the ability to pass a PHY index in the ethnl request, which will populate the generic ethnl_req_info with the relevant phydev when the command targets a PHY. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-01net: sfp: Add helper to return the SFP bus nameMaxime Chevallier
Knowing the bus name is helpful when we want to expose the link topology to userspace, add a helper to return the SFP bus name. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-01net: phy: add helpers to handle sfp phy connect/disconnectMaxime Chevallier
There are a few PHY drivers that can handle SFP modules through their sfp_upstream_ops. Introduce Phylib helpers to keep track of connected SFP PHYs in a netdevice's namespace, by adding the SFP PHY to the upstream PHY's netdev's namespace. By doing so, these SFP PHYs can be enumerated and exposed to users, which will be able to use their capabilities. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-01net: sfp: pass the phy_device when disconnecting an sfp module's PHYMaxime Chevallier
Pass the phy_device as a parameter to the sfp upstream .disconnect_phy operation. This is preparatory work to help track phy devices across a net_device's link. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-01net: phy: Introduce ethernet link topology representationMaxime Chevallier
Link topologies containing multiple network PHYs attached to the same net_device can be found when using a PHY as a media converter for use with an SFP connector, on which an SFP transceiver containing a PHY can be used. With the current model, the transceiver's PHY can't be used for operations such as cable testing, timestamping, macsec offload, etc. The reason being that most of the logic for these configuration, coming from either ethtool netlink or ioctls tend to use netdev->phydev, which in multi-phy systems will reference the PHY closest to the MAC. Introduce a numbering scheme allowing to enumerate PHY devices that belong to any netdev, which can in turn allow userspace to take more precise decisions with regard to each PHY's configuration. The numbering is maintained per-netdev, in a phy_device_list. The numbering works similarly to a netdevice's ifindex, with identifiers that are only recycled once INT_MAX has been reached. This prevents races that could occur between PHY listing and SFP transceiver removal/insertion. The identifiers are assigned at phy_attach time, as the numbering depends on the netdevice the phy is attached to. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-01bcachefs: check_directory_structure() can now be run onlineKent Overstreet
Now that we have dynamically resizable btree paths, check_directory_structure() can check one path - inode up to the root - in a single transaction. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-01bcachefs: Fix reattach_inode() for snapshotsKent Overstreet
reattach_inode() was broken w.r.t. snapshots - we'd lookup the subvolume to look up lost+found, but if we're in an interior node snapshot that didn't make any sense. Instead, this adds a dirent path for creating in a specific snapshot, skipping the subvolume; and we also make sure to create lost+found in the root snapshot, to avoid conflicts with lost+found being created in overlapping snapshots. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-01bcachefs: bch2_btree_trans_peek_slot_updatesKent Overstreet
refactoring the BTREE_ITER_WITH_UPDATES code, prep for removing the flag and making it always-on Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-01bcachefs: bch2_btree_trans_peek_prev_updatesKent Overstreet
bch2_btree_iter_peek_prev() now supports BTREE_ITER_WITH_UPDATES Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-01bcachefs: bch2_btree_trans_peek_updatesKent Overstreet
refactoring the BTREE_ITER_WITH_UPDATES code, prep for removing the flag and making it always-on Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-01bcachefs: growable btree_pathsKent Overstreet
XXX: we're allocating memory with btree locks held - bad We need to plumb through an error path so we can do allocate_dropping_locks() - but we're merging this now because it fixes a transaction path overflow caused by indirect extent fragmentation, and the resize path is rare. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-01bcachefs: Fix interior update path btree_path usesKent Overstreet
Since the btree_paths array is now about to become growable, we have to be careful not to refer to paths by pointer across contexts where they may be reallocated. This fixes the remaining btree_interior_update() paths - split and merge. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-01bcachefs: trans->nr_pathsKent Overstreet
Start to plumb through dynamically growable btree_paths; this patch replaces most BTREE_ITER_MAX references with trans->nr_paths. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-01bcachefs: trans->updates will also be resizableKent Overstreet
the reflink triggers are also bumping up against the maximum number of paths in a transaction - and generating proportional numbers of updates. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-01bcachefs: optimize __bch2_trans_get(), kill DEBUG_TRANSACTIONSKent Overstreet
- Some tweaks to greatly reduce locking overhead for the list of btree transactions, so that it can always be enabled: leave btree_trans objects on the list when they're on the percpu single item freelist, and only check for duplicates in the same process when CONFIG_BCACHEFS_DEBUG is enabled - don't zero out the full btree_trans() unless we allocated it from the mempool Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-01bcachefs: rcu protect trans->pathsKent Overstreet
Upcoming patches are going to be changing trans->paths to a reallocatable buffer. We need to guard against use after free when it's used by other threads; this introduces RCU protection to those paths and changes them to check for trans->paths == NULL Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-01bcachefs: Clean up btree_transKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-01bcachefs: kill btree_path.idxKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-01bcachefs: get_unlocked_mut_path() -> btree_path_idx_tKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-01bcachefs: bch2_btree_iter_peek_prev() no longer uses path->idxKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-01bcachefs: bch2_path_get() no longer uses path->idxKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-01bcachefs: trans_for_each_path_with_node() no longer uses path->idxKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-01bcachefs: trans_for_each_path() no longer uses path->idxKent Overstreet
path->idx is now a code smell: we should be using path_idx_t, since it's stable across btree path reallocation. This is also a bit faster, using the same loop counter vs. fetching path->idx from each path we iterate over. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-01bcachefs: kill trans_for_each_path_from()Kent Overstreet
dead code Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-01bcachefs: bch2_btree_path_to_text() -> btree_path_idx_tKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-01bcachefs: struct trans_for_each_path_inorder_iterKent Overstreet
reducing our usage of path->idx Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-01bcachefs: btree_insert_entry -> btree_path_idx_tKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-01bcachefs: btree_iter -> btree_path_idx_tKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-01bcachefs: btree_path_alloc() -> btree_path_idx_tKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-01bcachefs: bch2_btree_path_traverse() -> btree_path_idx_tKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-01bcachefs: bch2_btree_path_make_mut() -> btree_path_idx_tKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-01bcachefs: bch2_btree_path_set_pos() -> btree_path_idx_tKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-01bcachefs; bch2_path_put() -> btree_path_idx_tKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-01bcachefs: bch2_path_get() -> btree_path_idx_tKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-01bcachefs: minor bch2_btree_path_set_pos() optimizationKent Overstreet
bpos_eq() is cheaper than bpos_cmp() Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-01bcachefs: Kill GFP_NOFAIL usage in readahead pathKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-01bcachefs: Convert split_devs() to darrayKent Overstreet
Bit of cleanup & modernization: also moving this code to util.c, it'll be used by userspace as well. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-01bcachefs: skip journal more often in key cache reclaimKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-01bcachefs: for_each_keylist_key() declares loop iterKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-01bcachefs: bkey_for_each_ptr() now declares loop iterKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-01bcachefs: kill __bch2_btree_iter_peek_upto_and_restart()Kent Overstreet
dead code Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-01bcachefs: fsck -> bch2_trans_run()Kent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-01bcachefs: vstruct_for_each() now declares loop iterKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-01bcachefs: for_each_member_device_rcu() now declares loop iterKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-01bcachefs: for_each_member_device() now declares loop iterKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-01bcachefs: for_each_btree_key() now declares loop iterKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-01bcachefs: kill for_each_btree_key_norestart()Kent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-01bcachefs: kill for_each_btree_key_old_upto()Kent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-01bcachefs: for_each_btree_key_upto() -> for_each_btree_key_old_upto()Kent Overstreet
And for_each_btree_key2_upto -> for_each_btree_key_upto Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-01bcachefs: bch2_dirent_lookup() -> lockrestart_do()Kent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
generated by cgit (git 2.34.1) at 2025-09-15 13:39:26 +0000