| Age | Commit message (Collapse) | Author |
|---|
|
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
... that should zero on faults. Also remove the <censored> helpful
logics wrt range truncation copied from ppc32. Where it had ever
been needed only in case of copy_from_user() *and* had not been merged
into the mainline until a month after the need had disappeared.
A decade before openrisc went into mainline, I might add...
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
a) should not leave crap on fault
b) should _not_ require access_ok() in any cases.
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Al reported potential issue with ARC get_user() as it wasn't clearing
out destination pointer in case of fault due to bad address etc.
Verified using following
| {
| u32 bogus1 = 0xdeadbeef;
| u64 bogus2 = 0xdead;
| int rc1, rc2;
|
| pr_info("Orig values %x %llx\n", bogus1, bogus2);
| rc1 = get_user(bogus1, (u32 __user *)0x40000000);
| rc2 = get_user(bogus2, (u64 __user *)0x50000000);
| pr_info("access %d %d, new values %x %llx\n",
| rc1, rc2, bogus1, bogus2);
| }
| [ARCLinux]# insmod /mnt/kernel-module/qtn.ko
| Orig values deadbeef dead
| access -14 -14, new values 0 0
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-snps-arc@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Cc: stable@vger.kernel.org
Acked-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
It's -EFAULT, not -1 (and contrary to the comment in there,
__strnlen_user() can return 0 - on faults).
Cc: stable@vger.kernel.org
Acked-by: Richard Kuo <rkuo@codeaurora.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
It should check access_ok(). Otherwise a bunch of places turn into
trivially exploitable rootholes.
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
* copy_from_user() on access_ok() failure ought to zero the destination
* none of those primitives should skip the access_ok() check in case of
small constant size.
Cc: stable@vger.kernel.org
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
both for access_ok() failures and for faults halfway through
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Starting with v4.8, we allow a PCIe port to runtime suspend to D3hot if the
port itself and its children satisfy a number of conditions. Once a child
is removed, we recheck those conditions in case the removed device was
blocking the port from suspending.
The rechecking needs to happen *after* the device has been removed from the
bus it resides on. Otherwise when walking the port's subordinate bus in
pci_bridge_d3_update(), the device being removed would erroneously still be
taken into account.
However the device is removed from the bus_list in pci_destroy_dev() and we
currently recheck *before* that. Fix it.
Fixes: 9d26d3a8f1b0 ("PCI: Put PCIe ports into D3 during suspend")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Rafael J. Wysocki <mika.westerberg@linux.intel.com>
|
|
This patch adds PMU driver specific configuration to the parser
infrastructure by preceding any term with the '@' letter. As such doing
something like:
perf record -e some_event/@cfg1,@cfg2=config/ ...
will see 'cfg1' and 'cfg2=config' being added to the list of evsel
config terms. Token 'cfg1' and 'cfg2=config' are not processed in user
space and are meant to be interpreted by the PMU driver.
First the lexer/parser are supplemented with the required definitions to
recognise the driver specific configuration. From there they are simply
added to the list of event terms. The bulk of the work is done in
function "parse_events_add_pmu()" where driver config event terms are
added to a new list of driver config terms, which in turn spliced with
the event's new driver configuration list.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1473179837-3293-4-git-send-email-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Three fixes:
- AMD microcode loading fix with randomization
- an lguest tooling fix
- and an APIC enumeration boundary condition fix"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Fix num_processors value in case of failure
tools/lguest: Don't bork the terminal in case of wrong args
x86/microcode/AMD: Fix load of builtin microcode with randomized memory
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Ingo Molnar:
"A try_to_wake_up() memory ordering race fix causing a busy-loop in
ttwu()"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Fix a race between try_to_wake_up() and a woken up task
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"This contains:
- a set of fixes found by directed-random perf fuzzing efforts by
Vince Weaver, Alexander Shishkin and Peter Zijlstra
- a cqm driver crash fix
- an AMD uncore driver use after free fix"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Fix PEBSv3 record drain
perf/x86/intel/bts: Kill a silly warning
perf/x86/intel/bts: Fix BTS PMI detection
perf/x86/intel/bts: Fix confused ordering of PMU callbacks
perf/core: Fix aux_mmap_count vs aux_refcount order
perf/core: Fix a race between mmap_close() and set_output() of AUX events
perf/x86/amd/uncore: Prevent use after free
perf/x86/intel/cqm: Check cqm/mbm enabled state in event init
perf/core: Remove WARN from perf_event_read()
|
|
Now that all the missing pieces are implemented, let's enable it. An
example output below:
$ perf record -e '{cycles,instructions}' make
$ perf report --hierarchy --stdio
...
# Overhead Command / Shared Object / Symbol
# ...................... ..................................
#
...
25.74% 27.18% sh
19.96% 24.14% libc-2.24.so
9.55% 14.64% [.] __strcmp_sse2
1.54% 0.00% [.] __tfind
1.07% 1.13% [.] _int_malloc
0.95% 0.00% [.] __strchr_sse2
0.89% 1.39% [.] __tsearch
0.76% 0.00% [.] strlen
...
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Requested-by: Andi Kleen <andi@firstfloor.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20160913074552.13284-8-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Now the hists__fprintf_hierarchy_headers() is a simple wrapper passing
field separator. Let's do it directly.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20160913074552.13284-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When the --hierarchy option is used, each entry has its own hpp_list to
show the result. But it is not updating the width of each column for
perf-top. The perf-report command has no problem since it resets it
during header display.
$ sudo perf top --hierarchy --stdio
PerfTop: 160 irqs/sec kernel:38.8% exact: 100.0%
[4000Hz cycles:pp], (all, 12 CPUs)
----------------------------------------------------------------------
52.32% perf
24.74% [.] __symbols__insert
5.62% [.] rb_next
5.14% [.] dso__load_sym
Move the code into hists__fprintf() so that it can be called always.
Also it'd be better to put similar code together.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fixes: 1b2dbbf41a0f ("perf hists: Use own hpp_list for hierarchy mode")
Link: http://lkml.kernel.org/r/20160913074552.13284-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The hroot_in and hroot_out are roots of hierarchy trees of hist entries.
But when a hist entry is initialized by copying existing template entry,
it sometimes has non-empty tree and copies it incorrectly. This is a
problem especially when an event group is used since it creates dummy
entries from already-processed entries in other event members.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20160913074552.13284-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The hists__link_hierarchy() is to support hierarchy reports with an
event group. When it matches the leader event and the other members
(using hists__match_hierarchy()), it also needs to link unmatched member
entries with a dummy leader event so that it can show up in the output.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20160913074552.13284-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The hists__match_hierarchy() is to find matching hist entries in a
group. A matching entry has the same values for all sort keys given.
With an event group (e.g.: -e "{cycles,instructions}"), a leader event
should show other members in a group. So each entry in the leader
should be able to find its pair entries which have same values.
With hierarchy mode, it needs to search all matching children in a
hierarchy.
An example output looks like:
# Overhead Command / Shared Object / Symbol
# ...................... ..................................
#
25.74% 27.18% sh
19.96% 24.14% libc-2.24.so
9.55% 14.64% [.] __strcmp_sse2
1.54% 0.00% [.] __tfind
1.07% 1.13% [.] _int_malloc
...
In the above example, two overheads are shown - one for the leader and
another for the other group member. They were matched since their
command, dso and symbol have the same values.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20160913074552.13284-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Ingo Molnar:
"Another lockless_dereference() Sparse fix"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/barriers: Don't use sizeof(void) in lockless_dereference()
|
|
As with other cloned headers, compare the newly introduced mman related
headers against their source copy in kernel tree.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1473684871-209320-4-git-send-email-wangnan0@huawei.com
[ Added -I to ignore the uapi/ difference ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Ingo Molnar:
"This contains a Xen fix, an arm64 fix and a race condition /
robustization set of fixes related to ExitBootServices() usage and
boundary conditions"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/efi: Use efi_exit_boot_services()
efi/libstub: Use efi_exit_boot_services() in FDT
efi/libstub: Introduce ExitBootServices helper
efi/libstub: Allocate headspace in efi_get_memory_map()
efi: Fix handling error value in fdt_find_uefi_params
efi: Make for_each_efi_memory_desc_in_map() cope with running on Xen
|
|
The csets:
0ac3348e5024 ("perf tools: Recognize hugetlb mapping as anon mapping")
d7e404af115b ("perf record: Mark MAP_HUGETLB when synthesizing mmap events")
Added code conditional on MAP_HUGETLB, to make it build in older systems
where that define wasn't available. Now that we grabbed copies of
uapi/linux/mmap.h to have all those definitions in tools/, use it so
that we can support building the tools for older systems (without the
MAP_HUGETLB define in its libc headers) using new kernels that support
such maps.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/n/tip-wv6oqbfkpxbix4umj2kcfmaz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Several defines have different values in different arches, so we can't
just define it to the x86_64 value, use uapi/linux/mmap.h that was
recently introduced to reliably find those, not using possibly outdated
libc headers.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/n/tip-4eajp5yp8i2fuw44n7jmcg5t@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Some mmap related macros have different values for different
architectures. This patch introduces uapi mman.h for each
architectures.
Three headers are cloned from kernel include to tools/include:
tools/include/uapi/asm-generic/mman-common.h
tools/include/uapi/asm-generic/mman.h
tools/include/uapi/linux/mman.h
The main part of this patch is generated by following script:
macros=`cat $0 | awk 'V==1 {print}; /^# start macro list/ {V=1}'`
for arch in `ls tools/arch`
do
[ -d tools/arch/$arch/include/uapi/asm ] || mkdir -p tools/arch/$arch/include/uapi/asm
src=arch/$arch/include/uapi/asm/mman.h
target=tools/arch/$arch/include/uapi/asm/mman.h
guard="TOOLS_ARCH_"`echo $arch | awk '{print toupper($0)}'`_UAPI_ASM_MMAN_FIX_H
echo '#ifndef '$guard > $target
echo '#define '$guard >> $target
[ -f $src ] &&
for m in $macros
do
if grep '#define[ \t]*'$m $src > /dev/null 2>&1
then
grep -h '#define[ \t]*'$m $src | sed 's/[ \t]*\/\*.*$//g' >> $target
fi
done
if [ -f $src ]
then
grep '#include <asm-generic' $src >> $target
else
echo "#include <asm-generic/mman.h>" >> $target
fi
echo '#endif' >> $target
echo "$target"
done
exit 0
# Following macros are extracted from:
# tools/perf/trace/beauty/mmap.c
#
# start macro list
MADV_DODUMP
MADV_DOFORK
MADV_DONTDUMP
MADV_DONTFORK
MADV_DONTNEED
MADV_HUGEPAGE
MADV_HWPOISON
MADV_MERGEABLE
MADV_NOHUGEPAGE
MADV_NORMAL
MADV_RANDOM
MADV_REMOVE
MADV_SEQUENTIAL
MADV_SOFT_OFFLINE
MADV_UNMERGEABLE
MADV_WILLNEED
MAP_32BIT
MAP_ANONYMOUS
MAP_DENYWRITE
MAP_EXECUTABLE
MAP_FILE
MAP_FIXED
MAP_GROWSDOWN
MAP_HUGETLB
MAP_LOCKED
MAP_NONBLOCK
MAP_NORESERVE
MAP_POPULATE
MAP_PRIVATE
MAP_SHARED
MAP_STACK
MAP_UNINITIALIZED
MREMAP_FIXED
MREMAP_MAYMOVE
PROT_EXEC
PROT_GROWSDOWN
PROT_GROWSUP
PROT_NONE
PROT_READ
PROT_SEM
PROT_WRITE
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1473684871-209320-2-git-send-email-wangnan0@huawei.com
[ Added new files to tools/perf/MANIFEST to fix the detached tarball build, add mman.h for ARC ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Pull MD fixes from Shaohua Li:
"A few bug fixes for MD:
- Guoqing fixed a bug compiling md-cluster in kernel
- I fixed a potential deadlock in raid5-cache superblock write, a
hang in raid5 reshape resume and a race condition introduced in
rc4"
* tag 'md/4.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
raid5: fix a small race condition
md-cluster: make md-cluster also can work when compiled into kernel
raid5: guarantee enough stripes to avoid reshape hang
raid5-cache: fix a deadlock in superblock write
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto bugfix from Herbert Xu:
"Fix a bug in the cryptd code that may lead to crashes"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: cryptd - initialize child shash_desc on import
|
|
aic5_irq_domain_xlate() and aic_irq_domain_xlate() take the generic chip
lock without disabling interrupts, which can lead to a deadlock if an
interrupt occurs while the lock is held in one of these functions.
Replace irq_gc_{lock,unlock}() calls by
irq_gc_{lock_irqsave,unlock_irqrestore}() ones to prevent this bug from
happening.
Fixes: b1479ebb7720 ("irqchip: atmel-aic: Add atmel AIC/AIC5 drivers")
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: stable@vger.kernel.org
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Link: http://lkml.kernel.org/r/1473775109-4192-2-git-send-email-boris.brezillon@free-electrons.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Some irqchip drivers need to take the generic chip lock outside of the
irq context.
Provide the irq_gc_{lock_irqsave,unlock_irqrestore}() helpers to allow
one to disable irqs while entering a critical section protected by
gc->lock.
Note that we do not provide optimized version of these helpers for !SMP,
because they are not called from the hot-path.
[ tglx: Added a comment when these helpers should be [not] used ]
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: stable@vger.kernel.org
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Link: http://lkml.kernel.org/r/1473775109-4192-1-git-send-email-boris.brezillon@free-electrons.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
for-linus
Sagi writes:
Here we have:
- Kconfig dependencies fix from Arnd
- nvme-rdma device removal fixes from Steve
- possible bad deref fix from Colin
|
|
into drm-fixes
Two fixes for 4.8:
- missing static specifier on atmel_hlcdc_crtc_reset()
- bug in the hardware scaling logic
* tag 'drm/atmel-hlcdc/4.8-fixes' of github.com:bbrezillon/linux-at91:
drm/atmel-hlcdc: Make ->reset() implementation static
drm: atmel-hlcdc: Fix vertical scaling
|
|
git://anongit.freedesktop.org/drm-intel into drm-fixes
i915 fixes from Jani.
* tag 'drm-intel-fixes-2016-09-08' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Add GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE to SNB
drm/i915: disable 48bit full PPGTT when vGPU is active
drm/i915: enable vGPU detection for all
drm/i915/dvo: Remove dangling call to drm_encoder_cleanup()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Some small fixes for the new sunxi clk driver introduced this merge
window"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: sunxi-ng: Fix wrong reset register offsets
clk: sunxi-ng: nk: Make ccu_nk_find_best static
clk: sunxi-ng: Fix inverted test condition in ccu_helper_wait_for_lock
clk: sunxi: Fix return value check in sun8i_a23_mbus_setup()
clk: sunxi: pll2: Fix return value check in sun4i_pll2_setup()
|
|
Pull KVM fixes from Paolo Bonzini:
- s390: nested virt fixes (new 4.8 feature)
- x86: fixes for 4.8 regressions
- ARM: two small bugfixes
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm-arm: Unmap shadow pagetables properly
x86, clock: Fix kvm guest tsc initialization
arm: KVM: Fix idmap overlap detection when the kernel is idmap'ed
KVM: lapic: adjust preemption timer correctly when goes TSC backward
KVM: s390: vsie: fix riccbd
KVM: s390: don't use current->thread.fpu.* when accessing registers
|
|
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:
Stable patches:
- We must serialise LAYOUTGET and LAYOUTRETURN to ensure correct
state accounting
- Fix the CREATE_SESSION slot number
Bugfixes:
- sunrpc: fix a UDP memory accounting regression
- NFS: Fix an error reporting regression in nfs_file_write()
- pNFS: Fix further layout stateid issues
- RPC/rdma: Revert 3d4cf35bd4fa ("xprtrdma: Reply buffer
exhaustion...")
- RPC/rdma: Fix receive buffer accounting"
* tag 'nfs-for-4.8-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFSv4.1: Fix the CREATE_SESSION slot number accounting
xprtrdma: Fix receive buffer accounting
xprtrdma: Revert 3d4cf35bd4fa ("xprtrdma: Reply buffer exhaustion...")
pNFS: Don't forget the layout stateid if there are outstanding LAYOUTGETs
pNFS: Clear out all layout segments if the server unsets lrp->res.lrs_present
pNFS: Fix pnfs_set_layout_stateid() to clear NFS_LAYOUT_INVALID_STID
pNFS: Ensure LAYOUTGET and LAYOUTRETURN are properly serialised
NFS: Fix error reporting in nfs_file_write()
sunrpc: fix UDP memory accounting
|
|
rsc_lookup steals the passed-in memory to avoid doing an allocation of
its own, so we can't just pass in a pointer to memory that someone else
is using.
If we really want to avoid allocation there then maybe we should
preallocate somwhere, or reference count these handles.
For now we should revert.
On occasion I see this on my server:
kernel: kernel BUG at /home/cel/src/linux/linux-2.6/mm/slub.c:3851!
kernel: invalid opcode: 0000 [#1] SMP
kernel: Modules linked in: cts rpcsec_gss_krb5 sb_edac edac_core x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd btrfs xor iTCO_wdt iTCO_vendor_support raid6_pq pcspkr i2c_i801 i2c_smbus lpc_ich mfd_core mei_me sg mei shpchp wmi ioatdma ipmi_si ipmi_msghandler acpi_pad acpi_power_meter rpcrdma ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm nfsd nfs_acl lockd grace auth_rpcgss sunrpc ip_tables xfs libcrc32c mlx4_ib mlx4_en ib_core sr_mod cdrom sd_mod ast drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm crc32c_intel igb mlx4_core ahci libahci libata ptp pps_core dca i2c_algo_bit i2c_core dm_mirror dm_region_hash dm_log dm_mod
kernel: CPU: 7 PID: 145 Comm: kworker/7:2 Not tainted 4.8.0-rc4-00006-g9d06b0b #15
kernel: Hardware name: Supermicro Super Server/X10SRL-F, BIOS 1.0c 09/09/2015
kernel: Workqueue: events do_cache_clean [sunrpc]
kernel: task: ffff8808541d8000 task.stack: ffff880854344000
kernel: RIP: 0010:[<ffffffff811e7075>] [<ffffffff811e7075>] kfree+0x155/0x180
kernel: RSP: 0018:ffff880854347d70 EFLAGS: 00010246
kernel: RAX: ffffea0020fe7660 RBX: ffff88083f9db064 RCX: 146ff0f9d5ec5600
kernel: RDX: 000077ff80000000 RSI: ffff880853f01500 RDI: ffff88083f9db064
kernel: RBP: ffff880854347d88 R08: ffff8808594ee000 R09: ffff88087fdd8780
kernel: R10: 0000000000000000 R11: ffffea0020fe76c0 R12: ffff880853f01500
kernel: R13: ffffffffa013cf76 R14: ffffffffa013cff0 R15: ffffffffa04253a0
kernel: FS: 0000000000000000(0000) GS:ffff88087fdc0000(0000) knlGS:0000000000000000
kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
kernel: CR2: 00007fed60b020c3 CR3: 0000000001c06000 CR4: 00000000001406e0
kernel: Stack:
kernel: ffff8808589f2f00 ffff880853f01500 0000000000000001 ffff880854347da0
kernel: ffffffffa013cf76 ffff8808589f2f00 ffff880854347db8 ffffffffa013d006
kernel: ffff8808589f2f20 ffff880854347e00 ffffffffa0406f60 0000000057c7044f
kernel: Call Trace:
kernel: [<ffffffffa013cf76>] rsc_free+0x16/0x90 [auth_rpcgss]
kernel: [<ffffffffa013d006>] rsc_put+0x16/0x30 [auth_rpcgss]
kernel: [<ffffffffa0406f60>] cache_clean+0x2e0/0x300 [sunrpc]
kernel: [<ffffffffa04073ee>] do_cache_clean+0xe/0x70 [sunrpc]
kernel: [<ffffffff8109a70f>] process_one_work+0x1ff/0x3b0
kernel: [<ffffffff8109b15c>] worker_thread+0x2bc/0x4a0
kernel: [<ffffffff8109aea0>] ? rescuer_thread+0x3a0/0x3a0
kernel: [<ffffffff810a0ba4>] kthread+0xe4/0xf0
kernel: [<ffffffff8169c47f>] ret_from_fork+0x1f/0x40
kernel: [<ffffffff810a0ac0>] ? kthread_stop+0x110/0x110
kernel: Code: f7 ff ff eb 3b 65 8b 05 da 30 e2 7e 89 c0 48 0f a3 05 a0 38 b8 00 0f 92 c0 84 c0 0f 85 d1 fe ff ff 0f 1f 44 00 00 e9 f5 fe ff ff <0f> 0b 49 8b 03 31 f6 f6 c4 40 0f 85 62 ff ff ff e9 61 ff ff ff
kernel: RIP [<ffffffff811e7075>] kfree+0x155/0x180
kernel: RSP <ffff880854347d70>
kernel: ---[ end trace 3fdec044969def26 ]---
It seems to be most common after a server reboot where a client has been
using a Kerberos mount, and reconnects to continue its workload.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
A recent change removed the dependency on BLK_DEV_NVME, which implies
the dependency on PCI and BLOCK. We don't need CONFIG_PCI, but without
CONFIG_BLOCK we get tons of build errors, e.g.
In file included from drivers/nvme/host/core.c:16:0:
linux/blk-mq.h:182:33: error: 'struct gendisk' declared inside parameter list will not be visible outside of this definition or declaration [-Werror]
drivers/nvme/host/core.c: In function 'nvme_setup_rw':
drivers/nvme/host/core.c:295:21: error: implicit declaration of function 'rq_data_dir' [-Werror=implicit-function-declaration]
drivers/nvme/host/nvme.h: In function 'nvme_map_len':
drivers/nvme/host/nvme.h:217:6: error: implicit declaration of function 'req_op' [-Werror=implicit-function-declaration]
drivers/nvme/host/scsi.c: In function 'nvme_trans_bdev_limits_page':
drivers/nvme/host/scsi.c:768:85: error: implicit declaration of function 'queue_max_hw_sectors' [-Werror=implicit-function-declaration]
This adds back the specific CONFIG_BLOCK dependency to avoid broken
configurations.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: aa71987472a9 ("nvme: fabrics drivers don't need the nvme-pci driver")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
|
|
If there is an error on req->mr, req->mr is set to null, however
the following statement sets req->mr->need_inval causing a null
pointer dereference. Fix this by bailing out to label 'out' to
immediately return and hence skip over the offending null pointer
dereference.
Fixes: f5b7b559e1488 ("nvme-rdma: Get rid of duplicate variable")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
|
|
Change nvme-rdma to use the IB Client API to detect device removal.
This has the wonderful benefit of being able to blow away all the
ib/rdma_cm resources for the device being removed. No craziness about
not destroying the cm_id handling the event. No deadlocks due to broken
iw_cm/rdma_cm/iwarp dependencies. And no need to have a bound cm_id
around during controller recovery/reconnect to catch device removal
events.
We don't use the device_add aspect of the ib_client service since we only
want to create resources for an IB device if we have a target utilizing
that device.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
|
|
When we get a surprise disconnect from the target we queue a periodic
reconnect (which is the sane thing to do...).
We only move the queues out of CONNECTED when we retry to reconnect (after
10 seconds in the default case) but we stop the blk queues immediately
so we are not bothered with traffic from now on. If delete() is kicking
off in this period the queues are still in CONNECTED state.
Part of the delete sequence is trying to issue ctrl shutdown if the
admin queue is CONNECTED (which it is!). This request is issued but
stuck in blk-mq waiting for the queues to start again. This might be
the one preventing us from forward progress...
The patch separates the queue flags to CONNECTED and DELETING. Now we
will move out of CONNECTED as soon as error recovery kicks in (before
stopping the queues) and DELETING is on when we start the queue deletion.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
|
|
Pull networking fixes from David Miller:
"Mostly small sets of driver fixes scattered all over the place.
1) Mediatek driver fixes from Sean Wang. Forward port not written
correctly during TX map, missed handling of EPROBE_DEFER, and
mistaken use of put_page() instead of skb_free_frag().
2) Fix socket double-free in KCM code, from WANG Cong.
3) QED driver fixes from Sudarsana Reddy Kalluru, including a fix for
using the dcbx buffers before initializing them.
4) Mellanox Switch driver fixes from Jiri Pirko, including a fix for
double fib removals and an error handling fix in
mlxsw_sp_module_init().
5) Fix kernel panic when enabling LLDP in i40e driver, from Dave
Ertman.
6) Fix padding of TSO packets in thunderx driver, from Sunil Goutham.
7) TCP's rcv_wup not initialized properly when using fastopen, from
Neal Cardwell.
8) Don't use uninitialized flow keys in flow dissector, from Gao
Feng.
9) Use after free in l2tp module unload, from Sabrina Dubroca.
10) Fix interrupt registry ordering issues in smsc911x driver, from
Jeremy Linton.
11) Fix crashes in bonding having to do with enslaving and rx_handler,
from Mahesh Bandewar.
12) AF_UNIX deadlock fixes from Linus.
13) In mlx5 driver, don't read skb->xmit_mode after it might have been
freed from the TX reclaim path. From Tariq Toukan.
14) Fix a bug from 2015 in TCP Yeah where the congestion window does
not increase, from Artem Germanov.
15) Don't pad frames on receive in NFP driver, from Jakub Kicinski.
16) Fix chunk fragmenting in SCTP wrt. GSO, from Marcelo Ricardo
Leitner.
17) Fix deletion of VRF routes, from Mark Tomlinson.
18) Fix device refcount leak when DAD fails in ipv6, from Wei Yongjun"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (101 commits)
net/mlx4_en: Fix panic on xmit while port is down
net/mlx4_en: Fixes for DCBX
net/mlx4_en: Fix the return value of mlx4_en_dcbnl_set_state()
net/mlx4_en: Fix the return value of mlx4_en_dcbnl_set_all()
net: ethernet: renesas: sh_eth: add POST registers for rz
drivers: net: phy: mdio-xgene: Add hardware dependency
dwc_eth_qos: do not register semi-initialized device
sctp: identify chunks that need to be fragmented at IP level
mlxsw: spectrum: Set port type before setting its address
mlxsw: spectrum_router: Fix error path in mlxsw_sp_router_init
nfp: don't pad frames on receive
nfp: drop support for old firmware ABIs
nfp: remove linux/version.h includes
tcp: cwnd does not increase in TCP YeAH
net/mlx5e: Fix parsing of vlan packets when updating lro header
net/mlx5e: Fix global PFC counters replication
net/mlx5e: Prevent casting overflow
net/mlx5e: Move an_disable_cap bit to a new position
net/mlx5e: Fix xmit_more counter race issue
tcp: fastopen: avoid negative sk_forward_alloc
...
|
|
Milian reported that the event group on TUI shows duplicated overhead.
This was due to a bug on calculating hpp->buf position. The
hpp_advance() was called from __hpp__slsmg_color_printf() on TUI but
it's already called from the hpp__call_print_fn macro in __hpp__fmt().
The end result is that the print function returns number of bytes it
printed but the buffer advanced twice of the length.
This is generally not a problem since it doesn't need to access the
buffer again. But with event group, overhead needs to be printed
multiple times and hist_entry__snprintf_alignment() tries to fill the
space with buffer after it printed. So it (brokenly) showed the last
overhead again.
The bug was there from the beginning, but I think it's only revealed
when the alignment function was added.
Reported-by: Milian Wolff <milian.wolff@kdab.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fixes: 89fee7094323 ("perf hists: Do column alignment on the format iterator")
Link: http://lkml.kernel.org/r/20160912061958.16656-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In 293d5b439483 ("perf probe: Support probing on offline cross-arch binary")
DWARF register tables were introduced for many architectures, with the one for
the "dx" register being broken for x86_64, which got noticed by the 'perf test
bpf' testcase, that has this difference from a successful run to one that
fails, with the aforementioned patch:
-Writing event: p:perf_bpf_probe/func _text+5197232 f_mode=+68(%di):x32 offset=%si:s64 orig=dx:s32
-Failed to write event: Invalid argument
-bpf_probe: failed to apply perf probe eventsFailed to add events selected by BPF
+Writing event: p:perf_bpf_probe/func _text+5197232 f_mode=+68(%di):x32 offset=%si:s64 orig=%dx:s32
Add the missing '%' to '%dx' to fix this.
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 293d5b439483 ("perf probe: Support probing on offline cross-arch binary")
Link: https://lkml.kernel.org/r/20160909145955.GC32585@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add the required PCMCIA clock for the SA1111 "1800" device. This clock
is used to compute timing information for the PCMCIA interface in the
SoC device, rather than the SA1111. Hence, the provision of this clock
is a convenience for the driver and does not reflect the hardware, so
this must not be copied into DT.
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
