| Age | Commit message (Collapse) | Author |
|---|
|
During platform init, SNP initialization may fail for several reasons,
such as firmware command failures and incompatible versions. However,
the KVM capability may continue to advertise support for it.
The platform may have SNP enabled but if SNP_INIT fails then SNP is
not supported by KVM.
During KVM module initialization query the SNP platform status to obtain
the SNP initialization state and use it as an additional condition to
determine support for SEV-SNP.
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Co-developed-by: Pratik R. Sampat <prsampat@amd.com>
Signed-off-by: Pratik R. Sampat <prsampat@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Reviewed-by: Pavan Kumar Paluri <papaluri@amd.com>
Message-ID: <20250512221634.12045-1-Ashish.Kalra@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.16, take #2
- Rework of system register accessors for system registers that are
directly writen to memory, so that sanitisation of the in-memory
value happens at the correct time (after the read, or before the
write). For convenience, RMW-style accessors are also provided.
- Multiple fixes for the so-called "arch-timer-edge-cases' selftest,
which was always broken.
|
|
If reset_control_acquire() fails, then we can't return directly.
We need to do a little clean up first.
Fixes: cf2c3eceb757 ("spi: stm32-ospi: Make usage of reset_control_acquire/release() API")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aEmAGTUzzKZlLe3K@stanley.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Previously, the block layer stored the requests in the plug list in
LIFO order. For this reason, blk_attempt_plug_merge() would check
just the head entry for a back merge attempt, and abort after that
unless requests for multiple queues existed in the plug list. If more
than one request is present in the plug list, this makes the one-shot
back merging less useful than before, as it'll always fail to find a
quick merge candidate.
Use the tail entry for the one-shot merge attempt, which is the last
added request in the list. If that fails, abort immediately unless
there are multiple queues available. If multiple queues are available,
then scan the list. Ideally the latter scan would be a backwards scan
of the list, but as it currently stands, the plug list is singly linked
and hence this isn't easily feasible.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-block/20250611121626.7252-1-abuehaze@amazon.com/
Reported-by: Hazem Mohamed Abuelfotoh <abuehaze@amazon.com>
Fixes: e70c301faece ("block: don't reorder requests in blk_add_rq_to_plug")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Bios queued up in the zone write plug have already gone through all all
preparation in the submit_bio path, including the freeze protection.
Submitting them through submit_bio_noacct_nocheck duplicates the work
and can can cause deadlocks when freezing a queue with pending bio
write plugs.
Go straight to ->submit_bio or blk_mq_submit_bio to bypass the
superfluous extra freeze protection and checks.
Fixes: 9b1ce7f0c6f8 ("block: Implement zone append emulation")
Reported-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250611044416.2351850-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When blk_zone_write_plug_bio_endio() is called for a regular write BIO
used to emulate a zone append operation, that is, a BIO flagged with
BIO_EMULATES_ZONE_APPEND, the BIO operation code is restored to the
original REQ_OP_ZONE_APPEND but the BIO_EMULATES_ZONE_APPEND flag is not
cleared. Clear it to fully return the BIO to its orginal definition.
Fixes: 9b1ce7f0c6f8 ("block: Implement zone append emulation")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250611005915.89843-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Document recently merged feature auto buffer registration(UBLK_F_AUTO_BUF_REG).
Cc: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250611085632.109719-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It isn't necessary to freeze queue for updating disk size given submit_bio()
doesn't grab queue usage counter for checking eod.
Also many driver won't freeze queue for calling set_capacity_and_notify().
Move lo_set_size() out of queue freeze for fixing many lockdep warning
report.
Link: https://lore.kernel.org/linux-block/67ea99e0.050a0220.3c3d88.0042.GAE@google.com/
Reported-by: syzbot+9dd7dbb1a4b915dee638@syzkaller.appspotmail.com
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250611084938.108829-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When using publicly available tools like 'mdio-tools' to read/write data
from/to network interface and its PHY via C45 (clause 45) mdiobus,
there is no verification of parameters passed to the ioctl and
it accepts any mdio address.
Currently there is support for 32 addresses in kernel via PHY_MAX_ADDR define,
but it is possible to pass higher value than that via ioctl.
While read/write operation should generally fail in this case,
mdiobus provides stats array, where wrong address may allow out-of-bounds
read/write.
Fix that by adding address verification before C45 read/write operation.
While this excludes this access from any statistics, it improves security of
read/write operation.
Fixes: 4e4aafcddbbf ("net: mdio: Add dedicated C45 API to MDIO bus drivers")
Signed-off-by: Jakub Raczynski <j.raczynski@samsung.com>
Reported-by: Wenjing Shan <wenjing.shan@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When using publicly available tools like 'mdio-tools' to read/write data
from/to network interface and its PHY via mdiobus, there is no verification of
parameters passed to the ioctl and it accepts any mdio address.
Currently there is support for 32 addresses in kernel via PHY_MAX_ADDR define,
but it is possible to pass higher value than that via ioctl.
While read/write operation should generally fail in this case,
mdiobus provides stats array, where wrong address may allow out-of-bounds
read/write.
Fix that by adding address verification before read/write operation.
While this excludes this access from any statistics, it improves security of
read/write operation.
Fixes: 080bb352fad00 ("net: phy: Maintain MDIO device and bus statistics")
Signed-off-by: Jakub Raczynski <j.raczynski@samsung.com>
Reported-by: Wenjing Shan <wenjing.shan@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use common wrappers operating directly on the struct sg_table objects to
fix incorrect use of scatterlists sync calls. dma_sync_sg_for_*()
functions have to be called with the number of elements originally passed
to dma_map_sg_*() function, not the one returned in sgtable's nents.
Fixes: 1ffe09590121 ("udmabuf: fix dma-buf cpu access")
CC: stable@vger.kernel.org
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250507160913.2084079-3-m.szyprowski@samsung.com
|
|
Fix the TODO in ahci_broken_lpm() by using the proper BIOS build date.
The proper BIOS build date was provided by Hans, see Link.
Link: https://lore.kernel.org/linux-ide/6ea509c8-b38d-4941-8a29-c1117ff3dd5b@redhat.com/
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250610110757.1318959-6-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
pci_request_regions() became a managed devres functions if the PCI
device was enabled with pcim_enable_device(), which is the case for
pata_macio.
The PCI subsystem recently removed this hybrid feature from
pci_request_region(). When doing so, pata_macio was forgotten to be
ported to use pcim_request_all_regions(). If that function is not used,
pata_macio will fail on driver-reload because the PCI regions will
remain blocked.
Fix the region leak by replacing pci_request_regions() with its managed
counterpart, pcim_request_all_regions().
Fixes: 51f6aec99cb0 ("PCI: Remove hybrid devres nature from request functions")
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250610135413.35930-2-phasta@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
The recent change from using d_hash_and_lookup() to using
try_lookup_noperm() inadvertently introduce a d_revalidate() call when
the lookup was successful. Steven French reports that this resulted in
worse than halving of performance in some cases.
Prior to the offending patch the only caller of try_lookup_noperm() was
autofs which does not need the d_revalidate(). So it is safe to remove
the d_revalidate() call providing we stop using try_lookup_noperm() to
implement lookup_noperm().
The "try_" in the name is strongly suggestive that the caller isn't
expecting much effort, so it seems reasonable to avoid the effort of
d_revalidate().
Fixes: 06c567403ae5 ("Use try_lookup_noperm() instead of d_hash_and_lookup() outside of VFS")
Reported-by: Steve French <smfrench@gmail.com>
Link: https://lore.kernel.org/all/CAH2r5mu5SfBrdc2CFHwzft8=n9koPMk+Jzwpy-oUMx-wCRCesQ@mail.gmail.com/
Signed-off-by: NeilBrown <neil@brown.name>
Link: https://lore.kernel.org/174951744454.608730.18354002683881684261@noble.neil.brown.name
Tested-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Make sure all values are covered.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/20250610140020.2227932-1-hch@lst.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Smatch pointed out this trivial typo:
drivers/dma-buf/dma-buf.c:1123 dma_buf_map_attachment()
warn: passing positive error code '16' to 'ERR_PTR'
drivers/dma-buf/dma-buf.c
1113 dma_resv_assert_held(attach->dmabuf->resv);
1114
1115 if (dma_buf_pin_on_map(attach)) {
1116 ret = attach->dmabuf->ops->pin(attach);
1117 /*
1118 * Catch exporters making buffers inaccessible even when
1119 * attachments preventing that exist.
1120 */
1121 WARN_ON_ONCE(ret == EBUSY);
^^^^^
This was probably intended to be -EBUSY?
1122 if (ret)
--> 1123 return ERR_PTR(ret);
^^^
Otherwise we will eventually crash.
1124 }
1125
1126 sg_table = attach->dmabuf->ops->map_dma_buf(attach, direction);
1127 if (!sg_table)
1128 sg_table = ERR_PTR(-ENOMEM);
1129 if (IS_ERR(sg_table))
1130 goto error_unpin;
1131
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://lore.kernel.org/r/20250605085336.62156-1-christian.koenig@amd.com
|
|
The nl80211_parse_connkeys() function currently uses kfree() to release
the 'result' structure in error handling paths. However, if an error
occurs due to result->def being less than 0, the 'result' structure may
contain sensitive information.
To prevent potential leakage of sensitive data, replace kfree() with
kfree_sensitive() when freeing 'result'. This change aligns with the
approach used in its caller, nl80211_join_ibss(), enhancing the overall
security of the wireless subsystem.
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Link: https://patch.msgid.link/20250523110156.4017111-1-zilin@seu.edu.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
Jeff Johnson says:
==================
ath.git updates for v6.16-rc2
Fix a handful of both build and stability issues across multiple drivers.
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The changes I made in
wifi: iwlwifi: don't warn if the NIC is gone in resume
conflicted with a major rework done in this area.
The merge de-facto removed my changes.
Re-add them.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250603091754.70182-1-emmanuel.grumbach@intel.com
Fixes: 06c4b2036818 ("Merge tag 'iwlwifi-next-2025-05-15' of https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This reverts commit 4fcfcbe45734 ("wifi: mwifiex: Fix HT40 bandwidth
issue.")
That commit introduces a regression, when HT40 mode is enabled,
received packets are lost, this was experience with W8997 with both
SDIO-UART and SDIO-SDIO variants. From an initial investigation the
issue solves on its own after some time, but it's not clear what is
the reason. Given that this was just a performance optimization, let's
revert it till we have a better understanding of the issue and a proper
fix.
Cc: Jeff Chen <jeff.chen_1@nxp.com>
Cc: stable@vger.kernel.org
Fixes: 4fcfcbe45734 ("wifi: mwifiex: Fix HT40 bandwidth issue.")
Closes: https://lore.kernel.org/all/20250603203337.GA109929@francesco-nb/
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20250605130302.55555-1-francesco@dolcini.it
[fix commit reference format]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The commit d6d1e3e6580c ("mm/execmem: Unify early execmem_cache
behaviour") changed early behaviour of execemem ROX cache to allow its
usage in early x86 code that allocates text pages when
CONFIG_MITGATION_ITS is enabled.
The permission management of the pages allocated from execmem for ITS
mitigation is now completely contained in arch/x86/kernel/alternatives.c
and therefore there is no need to special case early allocations in
execmem.
This reverts commit d6d1e3e6580ca35071ad474381f053cbf1fb6414.
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20250603111446.2609381-6-rppt@kernel.org
|
|
execmem_alloc() sets permissions differently depending on the kernel
configuration, CPU support for PSE and whether a page is allocated
before or after mark_rodata_ro().
Add tracking for pages allocated for ITS when patching the core kernel
and make sure the permissions for ITS pages are explicitly managed for
both kernel and module allocations.
Fixes: 872df34d7c51 ("x86/its: Use dynamic thunks for indirect branches")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Co-developed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20250603111446.2609381-5-rppt@kernel.org
|
|
The of pages with ITS thunks allocated for modules are tracked by an
array in 'struct module'.
Since this is very architecture specific data structure, move it to
'struct mod_arch_specific'.
No functional changes.
Fixes: 872df34d7c51 ("x86/its: Use dynamic thunks for indirect branches")
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20250603111446.2609381-4-rppt@kernel.org
|
|
Currently ROX cache in execmem is enabled regardless of
STRICT_MODULE_RWX setting. This breaks an assumption that module memory
is writable when STRICT_MODULE_RWX is disabled, for instance for kernel
debuggin.
Only enable ROX cache in execmem when STRICT_MODULE_RWX is set to
restore the original behaviour of module text permissions.
Fixes: 64f6a4e10c05 ("x86: re-enable EXECMEM_ROX support")
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20250603111446.2609381-3-rppt@kernel.org
|
|
Collapsing pages to a leaf PMD or PUD should be done only if
X86_FEATURE_PSE is available, which is not the case when running e.g.
as a Xen PV guest.
Fixes: 41d88484c71c ("x86/mm/pat: restore large ROX pages after fragmentation")
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250528123557.12847-3-jgross@suse.com
|
|
According to 802.1AE standard, when ES and SC flags in TCI are zero,
used SCI should be the current active SC_RX. Current code uses the
header MAC address. Without this patch, when ES flag is 0 (using a
bridge or switch), header MAC will not fit the SCI and MACSec frames
will be discarted.
In order to test this issue, MACsec link should be stablished between
two interfaces, setting SC and ES flags to zero and a port identifier
different than one. For example, using ip macsec tools:
ip link add link $ETH0 macsec0 type macsec port 11 send_sci off
end_station off
ip macsec add macsec0 tx sa 0 pn 2 on key 01 $ETH1_KEY
ip macsec add macsec0 rx port 11 address $ETH1_MAC
ip macsec add macsec0 rx port 11 address $ETH1_MAC sa 0 pn 2 on key 02
ip link set dev macsec0 up
ip link add link $ETH1 macsec1 type macsec port 11 send_sci off
end_station off
ip macsec add macsec1 tx sa 0 pn 2 on key 01 $ETH0_KEY
ip macsec add macsec1 rx port 11 address $ETH0_MAC
ip macsec add macsec1 rx port 11 address $ETH0_MAC sa 0 pn 2 on key 02
ip link set dev macsec1 up
Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Co-developed-by: Andreu Montiel <Andreu.Montiel@technica-engineering.de>
Signed-off-by: Andreu Montiel <Andreu.Montiel@technica-engineering.de>
Signed-off-by: Carlos Fernandez <carlos.fernandez@technica-engineering.de>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This driver requires of_get_display_timing() from
CONFIG_VIDEOMODE_HELPERS but does not select it. If no other driver
selects it, there will be a failure from the linker if the driver is
built in or modpost if it is a module.
ERROR: modpost: "of_get_display_timing" [drivers/gpu/drm/sitronix/st7571-i2c.ko] undefined!
Select CONFIG_VIDEOMODE_HELPERS to resolve the build failure.
Fixes: 4b35f0f41ee2 ("drm/st7571-i2c: add support for Sitronix ST7571 LCD controller")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250610-drm-st7571-i2c-select-videomode-helpers-v1-1-d30b50ff6e64@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
The HKDF self-tests depend on the HMAC algorithms being registered.
HMAC is now registered at module_init, which put it at the same level as
HKDF. Move HKDF to late_initcall so that it runs afterwards.
Fixes: ef93f1562803 ("Revert "crypto: run initcalls for generic implementations earlier"")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Fix RX_DONE_INT_MASK definition in order to enable RX queues 16-31.
Fixes: f252493e18353 ("net: airoha: Enable multiple IRQ lines support in airoha_eth driver.")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250609-aioha-fix-rx-queue-mask-v1-1-f33706a06fa2@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Before appending sysdata, prepare_extradata() checks if any feature is
enabled in sysdata_fields (and exits early if none is enabled).
When SYSDATA_RELEASE was introduced, we missed adding it to the list of
features being checked against sysdata_fields in prepare_extradata().
The result was that, if only SYSDATA_RELEASE is enabled in
sysdata_fields, we incorreclty exit early and fail to append the
release.
Instead of checking specific bits in sysdata_fields, check if
sysdata_fields has ALL bit zeroed and exit early if true. This fixes
case when only SYSDATA_RELEASE enabled and makes the code more general /
less error prone in future feature implementation.
Signed-off-by: Gustavo Luiz Duarte <gustavold@gmail.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Fixes: cfcc9239e78a ("netconsole: append release to sysdata")
Link: https://patch.msgid.link/20250609-netconsole-fix-v1-1-17543611ae31@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sk->sk_prot->sock_is_readable is a valid function pointer when sk resides
in a sockmap. After the last sk_psock_put() (which usually happens when
socket is removed from sockmap), sk->sk_prot gets restored and
sk->sk_prot->sock_is_readable becomes NULL.
This makes sk_is_readable() racy, if the value of sk->sk_prot is reloaded
after the initial check. Which in turn may lead to a null pointer
dereference.
Ensure the function pointer does not turn NULL after the check.
Fixes: 8934ce2fd081 ("bpf: sockmap redirect ingress support")
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250609-skisreadable-toctou-v1-1-d0dfb2d62c37@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The TP-Link UE200 is a RTL8152B based USB 2.0 Fast Ethernet adapter. This
patch adds its device ID. It has been tested on Ubuntu 22.04.5.
Signed-off-by: Lucas Sanchez Sagrado <lucsansag@gmail.com>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://patch.msgid.link/20250609145536.26648-1-lucsansag@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
I've been focusing on networking BPF bits lately, add myself as a
reviewer.
Signed-off-by: Stanislav Fomichev <stfomichev@gmail.com>
Acked-by: KP Singh <kpsingh@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20250610175442.2138504-1-stfomichev@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Two 'static inline' TDX helper functions (sc_retry() and
sc_retry_prerr()) take function pointer arguments which refer to
assembly functions. Normally, the compiler inlines the TDX helper,
realizes that the function pointer targets are completely static --
thus can be resolved at compile time -- and generates direct call
instructions.
But, other times (like when CONFIG_CC_OPTIMIZE_FOR_SIZE=y), the
compiler declines to inline the helpers and will instead generate
indirect call instructions.
Indirect calls to assembly functions require special annotation (for
various Control Flow Integrity mechanisms). But TDX assembly
functions lack the special annotations and can only be called
directly.
Annotate both the helpers as '__always_inline' to prod the compiler
into maintaining the direct calls. There is no guarantee here, but
Peter has volunteered to report the compiler bug if this assumption
ever breaks[1].
Fixes: 1e66a7e27539 ("x86/virt/tdx: Handle SEAMCALL no entropy error in common code")
Fixes: df01f5ae07dd ("x86/virt/tdx: Add SEAMCALL error printing for module initialization")
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/lkml/20250605145914.GW39944@noisy.programming.kicks-ass.net/ [1]
Link: https://lore.kernel.org/all/20250606130737.30713-1-kai.huang%40intel.com
|
|
Commit a17b37a3f416 ("x86/idle: Change arguments of mwait_idle_with_hints()
to u32") changed the type of arguments of mwait_idle_with_hints() from
unsigned long to u32.
Change the type of variables in the call to mwait_idle_with_hints() to
unsigned int to follow the change.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Reviewed-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Link: https://patch.msgid.link/20250609063528.48715-1-ubizjak@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Use ACPI IRQ override on MACHENIKE laptop to make the internal
keyboard work.
Add a new entry to the irq1_edge_low_force_override structure, similar
to the existing ones.
Link: https://bbs.deepin.org.cn/zh/post/287628
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Link: https://patch.msgid.link/20250603122059.1072790-1-guanwentao@uniontech.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
On the MSI Modern 14 C5M the ECDT table contains invalid data:
UID : 00000000
GPE Number : 00 /* Invalid, 03 would be correct */
Namepath : "" /* Invalid, "\_SB.PCI0.SBRG.EC" would
* be correct
*/
This slows down the EC access as the wrong GPE event is used for
communication. Additionally the ID string is invalid.
Ignore such faulty ECDT tables by verifying that the ID string has
a valid format.
Tested-by: glpnk@proton.me
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20250529235310.540530-1-W_Armin@gmx.de
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
With nosmp in cmdline, other CPUs are not brought up, leaving
their cpc_desc_ptr NULL. CPU0's iteration via for_each_possible_cpu()
dereferences these NULL pointers, causing panic.
Panic backtrace:
[ 0.401123] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000b8
...
[ 0.403255] [<ffffffff809a5818>] cppc_allow_fast_switch+0x6a/0xd4
...
Kernel panic - not syncing: Attempted to kill init!
Fixes: 3cc30dd00a58 ("cpufreq: CPPC: Enable fast_switch")
Reported-by: Xu Lu <luxu.kernel@bytedance.com>
Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com>
Link: https://patch.msgid.link/20250604023036.99553-1-cuiyunhui@bytedance.com
[ rjw: New subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Commit a17b37a3f416 ("x86/idle: Change arguments of mwait_idle_with_hints()
to u32") changed the type of arguments of mwait_idle_with_hints() from
unsigned long to u32.
Change the type of variables in the call to mwait_idle_with_hints() to
unsigned int to follow the change.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Link: https://patch.msgid.link/20250609064235.49146-1-ubizjak@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Fix a compile error in the `impl_has_hr_timer!` macro as follows:
error[E0599]: no method named cast_mut found for raw pointer *mut Foo in the current scope
The `container_of!` macro already returns a mutable pointer when used
in a `*mut T` context so the `.cast_mut()` method is not available.
[ We missed this one because there is no caller yet and it is
a macro. - Miguel ]
Fixes: 74d6a606c2b3 ("rust: retain pointer mut-ness in `container_of!`")
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Acked-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250606020505.3186533-1-fujita.tomonori@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
CXL has a symbol dependency on einj_core.ko, so if einj_init() fails then
cxl_core.ko fails to load. Prior to the faux_device_create() conversion,
einj_probe() failures were tracked by the einj_initialized flag without
failing einj_init().
Revert to that behavior and always succeed einj_init() given there is no
way, and no pressing need, to discern faux device-create vs device-probe
failures.
This situation arose because CXL knows proper kernel named objects to
trigger errors against, but acpi-einj knows how to perform the error
injection. The injection mechanism is shared with non-CXL use cases. The
result is CXL now has a module dependency on einj-core.ko, and init/probe
failures are handled at runtime.
Fixes: 6cb9441bfe8d ("ACPI: APEI: EINJ: Transition to the faux device interface")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Ben Cheatham <benjamin.cheatham@amd.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20250607033228.1475625-4-dan.j.williams@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The acpi-einj conversion to faux_device_create() leads to a noisy error
message when the error injection facility is disabled. Quiet the error as
CXL error injection via ACPI expects the module to stay loaded even if the
error injection facility is disabled.
This situation arose because CXL knows proper kernel named objects to
trigger errors against, but acpi-einj knows how to perform the error
injection. The injection mechanism is shared with non-CXL use cases. The
result is CXL now has a module dependency on einj-core.ko, and init/probe
failures are handled at runtime.
Fixes: 6cb9441bfe8d ("ACPI: APEI: EINJ: Transition to the faux device interface")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20250607033228.1475625-3-dan.j.williams@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
faux_device_create() is almost a suitable candidate to replace
platform_driver_probe() if not for the fact that faux_device_create()
supports dynamic attach/detach of the driver.
Drop the bind attributes with the expectation that simple faux devices can
always assume that the device is permanently bound at create, and only
unbound at 'destroy'.
The acpi-einj driver depends on static bind.
Fixes: 6cb9441bfe8d ("ACPI: APEI: EINJ: Transition to the faux device interface")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20250607033228.1475625-2-dan.j.williams@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This reverts commit 28615e6eed152f2fda5486680090b74aeed7b554.
No, we don't make random features default to being on.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: SeongJae Park <sj@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
syzbot reports:
BUG: KASAN: slab-use-after-free in getrusage+0x1109/0x1a60
Read of size 8 at addr ffff88810de2d2c8 by task a.out/304
CPU: 0 UID: 0 PID: 304 Comm: a.out Not tainted 6.16.0-rc1 #1 PREEMPT(voluntary)
Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x53/0x70
print_report+0xd0/0x670
? __pfx__raw_spin_lock_irqsave+0x10/0x10
? getrusage+0x1109/0x1a60
kasan_report+0xce/0x100
? getrusage+0x1109/0x1a60
getrusage+0x1109/0x1a60
? __pfx_getrusage+0x10/0x10
__io_uring_show_fdinfo+0x9fe/0x1790
? ksys_read+0xf7/0x1c0
? do_syscall_64+0xa4/0x260
? vsnprintf+0x591/0x1100
? __pfx___io_uring_show_fdinfo+0x10/0x10
? __pfx_vsnprintf+0x10/0x10
? mutex_trylock+0xcf/0x130
? __pfx_mutex_trylock+0x10/0x10
? __pfx_show_fd_locks+0x10/0x10
? io_uring_show_fdinfo+0x57/0x80
io_uring_show_fdinfo+0x57/0x80
seq_show+0x38c/0x690
seq_read_iter+0x3f7/0x1180
? inode_set_ctime_current+0x160/0x4b0
seq_read+0x271/0x3e0
? __pfx_seq_read+0x10/0x10
? __pfx__raw_spin_lock+0x10/0x10
? __mark_inode_dirty+0x402/0x810
? selinux_file_permission+0x368/0x500
? file_update_time+0x10f/0x160
vfs_read+0x177/0xa40
? __pfx___handle_mm_fault+0x10/0x10
? __pfx_vfs_read+0x10/0x10
? mutex_lock+0x81/0xe0
? __pfx_mutex_lock+0x10/0x10
? fdget_pos+0x24d/0x4b0
ksys_read+0xf7/0x1c0
? __pfx_ksys_read+0x10/0x10
? do_user_addr_fault+0x43b/0x9c0
do_syscall_64+0xa4/0x260
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f0f74170fc9
Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 8
RSP: 002b:00007fffece049e8 EFLAGS: 00000206 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f0f74170fc9
RDX: 0000000000001000 RSI: 00007fffece049f0 RDI: 0000000000000004
RBP: 00007fffece05ad0 R08: 0000000000000000 R09: 00007fffece04d90
R10: 0000000000000000 R11: 0000000000000206 R12: 00005651720a1100
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
</TASK>
Allocated by task 298:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_slab_alloc+0x6e/0x70
kmem_cache_alloc_node_noprof+0xe8/0x330
copy_process+0x376/0x5e00
create_io_thread+0xab/0xf0
io_sq_offload_create+0x9ed/0xf20
io_uring_setup+0x12b0/0x1cc0
do_syscall_64+0xa4/0x260
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 22:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x37/0x50
kmem_cache_free+0xc4/0x360
rcu_core+0x5ff/0x19f0
handle_softirqs+0x18c/0x530
run_ksoftirqd+0x20/0x30
smpboot_thread_fn+0x287/0x6c0
kthread+0x30d/0x630
ret_from_fork+0xef/0x1a0
ret_from_fork_asm+0x1a/0x30
Last potentially related work creation:
kasan_save_stack+0x33/0x60
kasan_record_aux_stack+0x8c/0xa0
__call_rcu_common.constprop.0+0x68/0x940
__schedule+0xff2/0x2930
__cond_resched+0x4c/0x80
mutex_lock+0x5c/0xe0
io_uring_del_tctx_node+0xe1/0x2b0
io_uring_clean_tctx+0xb7/0x160
io_uring_cancel_generic+0x34e/0x760
do_exit+0x240/0x2350
do_group_exit+0xab/0x220
__x64_sys_exit_group+0x39/0x40
x64_sys_call+0x1243/0x1840
do_syscall_64+0xa4/0x260
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The buggy address belongs to the object at ffff88810de2cb00
which belongs to the cache task_struct of size 3712
The buggy address is located 1992 bytes inside of
freed 3712-byte region [ffff88810de2cb00, ffff88810de2d980)
which is caused by the task_struct pointed to by sq->thread being
released while it is being used in the function
__io_uring_show_fdinfo(). Holding ctx->uring_lock does not prevent ehre
relase or exit of sq->thread.
Fix this by assigning and looking up ->thread under RCU, and grabbing a
reference to the task_struct. This ensures that it cannot get released
while fdinfo is using it.
Reported-by: syzbot+531502bbbe51d2f769f4@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/682b06a5.a70a0220.3849cf.00b3.GAE@google.com
Fixes: 3fcb9d17206e ("io_uring/sqpoll: statistics of the true utilization of sq threads")
Signed-off-by: Penglei Jiang <superman.xpt@gmail.com>
Link: https://lore.kernel.org/r/20250610171801.70960-1-superman.xpt@gmail.com
[axboe: massage commit message]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux
Merge an urgent cpupower utility fix for 6.16-rc1 from Shuah Khan:
"Add unitdir variable for specifying the location to install systemd
service units instead of installing under ${libdir}/systemd/system
which doesn't work on some distributions."
* tag 'linux-cpupower-6.16-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
cpupower: split unitdir from libdir in Makefile
|
|
Previously, e1000_down called cancel_work_sync for the e1000 reset task
(via e1000_down_and_stop), which takes RTNL.
As reported by users and syzbot, a deadlock is possible in the following
scenario:
CPU 0:
- RTNL is held
- e1000_close
- e1000_down
- cancel_work_sync (cancel / wait for e1000_reset_task())
CPU 1:
- process_one_work
- e1000_reset_task
- take RTNL
To remedy this, avoid calling cancel_work_sync from e1000_down
(e1000_reset_task does nothing if the device is down anyway). Instead,
call cancel_work_sync for e1000_reset_task when the device is being
removed.
Fixes: e400c7444d84 ("e1000: Hold RTNL when e1000_down can be called")
Reported-by: syzbot+846bb38dc67fe62cc733@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/683837bf.a00a0220.52848.0003.GAE@google.com/
Reported-by: John <john.cs.hey@gmail.com>
Closes: https://lore.kernel.org/netdev/CAP=Rh=OEsn4y_2LvkO3UtDWurKcGPnZ_NPSXK=FbgygNXL37Sw@mail.gmail.com/
Signed-off-by: Joe Damato <jdamato@fastly.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Set use_nsecs=true as timestamp is reported in ns. Lack of this result
in smaller timestamp error window which cause error during phc2sys
execution on E825 NICs:
phc2sys[1768.256]: ioctl PTP_SYS_OFFSET_PRECISE: Invalid argument
This problem was introduced in the cited commit which omitted setting
use_nsecs to true when converting the ice driver to use
convert_base_to_cs().
Testing hints (ethX is PF netdev):
phc2sys -s ethX -c CLOCK_REALTIME -O 37 -m
phc2sys[1769.256]: CLOCK_REALTIME phc offset -5 s0 freq -0 delay 0
Fixes: d4bea547ebb57 ("ice/ptp: Remove convert_art_to_tsc()")
Signed-off-by: Anton Nadezhdin <anton.nadezhdin@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
If a reset event is received from the PF early in the init cycle, the
state machine hangs for about 25 seconds.
Reproducer:
echo 1 > /sys/class/net/$PF0/device/sriov_numvfs
ip link set dev $PF0 vf 0 mac $NEW_MAC
The log shows:
[792.620416] ice 0000:5e:00.0: Enabling 1 VFs
[792.738812] iavf 0000:5e:01.0: enabling device (0000 -> 0002)
[792.744182] ice 0000:5e:00.0: Enabling 1 VFs with 17 vectors and 16 queues per VF
[792.839964] ice 0000:5e:00.0: Setting MAC 52:54:00:00:00:11 on VF 0. VF driver will be reinitialized
[813.389684] iavf 0000:5e:01.0: Failed to communicate with PF; waiting before retry
[818.635918] iavf 0000:5e:01.0: Hardware came out of reset. Attempting reinit.
[818.766273] iavf 0000:5e:01.0: Multiqueue Enabled: Queue pair count = 16
Fix it by scheduling the reset task and making the reset task capable of
resetting early in the init cycle.
Fixes: ef8693eb90ae3 ("i40evf: refactor reset handling")
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Tested-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
When a VFLR interrupt is received during a VF reset initiated from a
different source, the VFLR may be not fully handled. This can
leave the VF in an undefined state.
To address this, set the I40E_VFLR_EVENT_PENDING bit again during VFLR
handling if the reset is not yet complete. This ensures the driver
will properly complete the VF reset in such scenarios.
Fixes: 52424f974bc5 ("i40e: Fix VF hang when reset is triggered on another VF")
Signed-off-by: Robert Malz <robert.malz@canonical.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
