| Age | Commit message (Collapse) | Author |
|---|
|
For WPA3-SAE Connection in EXTSAE mode, the userspace daemon is allowed to
generate the SAE Auth frames. The driver uses the "mgmt_frame" FW IOVAR to
transmit this MGMT frame.
Before sending the IOVAR, the Driver is incorrectly treating the channel
number read from the FW as a frequency value and again attempts to convert
this into a channel number using ieee80211_frequency_to_channel().
This added an invalid channel number as part of the IOVAR request to the FW
And some FW which strictly expects a valid channel would return BAD_CHAN
error, while failing to transmit the driver requested SAE Auth MGMT frame.
Fix this in the CYW vendor specific MGMT TX cfg80211 ops handler, by not
treating the channel number read from the FW as frequency value and skip
the attempt to convert it again into a channel number.
Also fix this in the generic MGMT TX cfg80211 ops handler.
Fixes: c2ff8cad6423 ("brcm80211: make mgmt_tx in brcmfmac accept a NULL channel")
Fixes: 66f909308a7c ("wifi: brcmfmac: cyw: support external SAE authentication in station mode")
Signed-off-by: Ting-Ying Li <tingying.li@cypress.com>
Signed-off-by: Gokul Sivakumar <gokulkumar.sivakumar@infineon.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>>
Link: https://patch.msgid.link/20250723105918.5229-1-gokulkumar.sivakumar@infineon.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This is a subset of unused functions in bcrmsmac phy_cmn.c,
They're unused since the original 2010
commit a9533e7ea3c4 ("Staging: Add initial release of brcm80211 - Broadcom
802.11n wireless LAN driver.")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>>
Link: https://patch.msgid.link/20250626140812.56700-4-linux@treblig.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This is a subset of unused functions in bcrmsmac phy_cmn.c,
They're unused since the original 2010
commit a9533e7ea3c4 ("Staging: Add initial release of brcm80211 - Broadcom
802.11n wireless LAN driver.")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>>
Link: https://patch.msgid.link/20250626140812.56700-3-linux@treblig.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This is a subset of unused functions in bcrmsmac phy_cmn.c,
They're unused since the original 2010
commit a9533e7ea3c4 ("Staging: Add initial release of brcm80211 - Broadcom
802.11n wireless LAN driver.")
Remove them.
Then remove two more functions in phy_n.c that were only used
by the ones just removed.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>>
Link: https://patch.msgid.link/20250626140812.56700-2-linux@treblig.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
iwl_ppag_table_cmd versions"
It turns out that version 6 is still needed.
This change will be brought back once the FW that supports version 6 will no
longer be supported.
This reverts commit 24bc49d158c7 ("wifi: iwlwifi: remove support of several
iwl_ppag_table_cmd versions")
Link: https://patch.msgid.link/20250723064515.2084903-2-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
We assume that iwl_mac_cfg and iwl_rf_cfg instances has either
both ucode_api_min and ucode_api_max set, or neither.
Validate this assumption with a Kunit test.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250723094230.66502f3f4345.I661f347d3bb29994d8b2ec1d3f31f3383422d68a@changeid
|
|
Functions that are not called from the opmodes shouldn't be exported.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250723094230.97b80d0d00b3.Ib8abe63c9b25ef1e4ae1bc167cb23fe34bb3682a@changeid
|
|
In missed beacon handling, we compare the FW link id to the
bss_param_ch_cnt_link_id, which is a spec link id. Fix it.
Reviewed-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250723094230.2104f8cac836.I25ed77c2b87bde82a9153e2aa26e09b8a42f6ee3@changeid
|
|
Only the EOF bit handling for single frames was ported to the MLD
driver. The code to handle AMPDUs correctly was forgotten. Add it back
so that the bit is reported in the radiotap headers again.
Fixes: d1e879ec600f ("wifi: iwlwifi: add iwlmld sub-driver")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250723094230.195be86372d5.I4db4abf348f7b6dfc75f869770dd77655a204bc7@changeid
|
|
This feature turns out to have an issue: it can take up to 8 seconds to
detect high throughput scenarios and to leave RX OMI bandwidth
reduction. This leads to throughput degradation.
Until the issues are fixed, remove the RX OMI implementation.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250723094230.a9ccfe210516.Ic87bc7709a6761f593e88f1488a41442c68c1686@changeid
|
|
This version doesn't provide the sta id, so we need to look it up -
assuming that no other sta exists, since one of the conditions of
entering OMI is not having P2P/TDLS.
But when we leave OMI, because of the P2P/TDLS activation, the P2P/TDLS
sta can already exist while we receive the notification from the FW.
This causes an error log which is incorrect.
Since OMI is only supported in SC, which is not shipped yet, no one will
use a FW with the old version.
Remove support for it.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250723094230.b716b9cebaa7.I2a1cc4be441dbbb5566a9a3d2d330d956ff3ed38@changeid
|
|
The only difference between SC2 and SC2F is that they use a different
FSEQ image.
The firmware of SC2 implements the logic of selecting the right FSEQ
image to load, so there is no need for SC2F firmware image.
Stop loading it, and load SC2 image instead.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250723094230.bf0ec63e49a9.Iffa0a982f90a179566d85c60ccd3dbfc50e293ef@changeid
|
|
NAN is not officially supported on any of the MVM devices so there
is no need to maintain it.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250723094230.b327adbf35c0.I0357e383ab5df72d8b87e0dee10609a6946865b6@changeid
|
|
If no frames are received on a queue for a while, the reorder buffer
head_sn may be an old one. When the next frame that is received on
that queue and buffered is a subframe of an AMSDU but not the last
subframe, it will not update the buffer's head_sn. When the frame
release notification arrives, it will not release the buffered frame
because it will look like the notification's NSSN is lower than the
buffer's head_sn (because of a wraparound).
Fix it by updating the head_sn when the first frame is buffered.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250723094230.e1f62a9a603c.I7b57a481122074b1f40d39cd31db2e5262668eb2@changeid
|
|
If no frames are received on a queue for a while, the reorder buffer
head_sn may be an old one. When the next frame that is received on
that queue and buffered is a subframe of an AMSDU but not the last
subframe, it will not update the buffer's head_sn. When the frame
release notification arrives, it will not release the buffered frame
because it will look like the notification's NSSN is lower than the
buffer's head_sn (because of a wraparound).
Fix it by updating the head_sn when the first frame is buffered.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Reviewed-by: Daniel Gabay <daniel.gabay@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250723094230.795ec0cb8817.I9ec9a3508e7935e8d1833ea3e086066fdefee644@changeid
|
|
When fips_enabled is set, keys will not be given to the
hardware by mac80211 since the hardware isn't certified.
In this case, various features cannot work correctly as
the firmware needs to handle frames, but it then cannot
since no keys are available.
Disable features:
- WoWLAN since no keys etc.
- MFP since some frames need to be handled in firmware
- EHT/6GHz since MFP is required
Also restrict A-MSDU size since A-MSDUs cannot be split
up by hardware and thus need to fit into the RX buffers
in one piece.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250723094230.329fade58a27.I0be27dd329643cc5fdf79a8c8b8f6d2e6fb5c175@changeid
|
|
The firmware is able to collect channel statistics when doing passive
scans. Enable the flag when doing a passive scan on an AP interface and
collect the survey information.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250723094230.a659ef1b1fd8.I24a9a0383327c231f36be170968bc7bac801f9f2@changeid
|
|
The user can request to disable RX aggregations via the module parameter
enable_11n.
Honor this request and reject addba.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250723094230.40746586ade7.Ibf5877df76ea2f1eee614166b3194843fd9898cd@changeid
|
|
Add device-tree bindings for the RT2800 SOC wifi device found in older
Ralink/Mediatek devices.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250722212856.11343-8-rosenp@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
MT7620A devices all contain a wifi device as part of the SOC. Add it
here to get it working.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://patch.msgid.link/20250722212856.11343-7-rosenp@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Remove a bunch of static memory management functions and simplify with
devm.
Also move allocation before ieee80211_alloc_hw to get rid of goto
statements and clarify the error handling a bit more.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://patch.msgid.link/20250722212856.11343-6-rosenp@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This driver was written with multiple SOC platforms in mind. However
since Ralink was aquired by Mediatek, it only effectively got used by
older platforms. As such, we can slim down the driver slightly by moving
all of rt2x00soc to rt2800soc in order to benefit from inlining.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://patch.msgid.link/20250722212856.11343-5-rosenp@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add a single binding to help the already present dts files load the
driver. More are possible but there doesn't seem to be a significant
difference between them to justify this.
Use wifi name per dtschema requirements.
Added OF dependency to SOC CONFIG as adding of_match_table without OF
being present makes no sense.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Link: https://patch.msgid.link/20250722212856.11343-4-rosenp@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
mod_name is a legacy debugging feature with no real modern use. An
analysis of the underlying MIPS setup code reveals it to also be unused.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Link: https://patch.msgid.link/20250722212856.11343-3-rosenp@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
While this driver is for a specific arch, there is nothing preventing it
from being compiled on other platforms.
Allows the various bots to test compilation and complain if a patch is
bad.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://patch.msgid.link/20250722212856.11343-2-rosenp@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
On devices without WANT_MONITOR_VIF (and probably without
channel context support) we get a WARN_ON for changing the
per-link setting of a monitor interface.
Since we already skip AP_VLAN interfaces and MONITOR with
WANT_MONITOR_VIF and/or NO_VIRTUAL_MONITOR should update
the settings, catch this in the link change code instead
of the warning.
Reported-by: Martin Kaistra <martin.kaistra@linutronix.de>
Link: https://lore.kernel.org/r/a9de62a0-28f1-4981-84df-253489da74ed@linutronix.de/
Fixes: c4382d5ca1af ("wifi: mac80211: update the right link for tx power")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In brcmf_cyw_mgmt_tx() the "len" counter of the struct
brcmf_mf_params_le::data flexible array is stored as little-endian via
cpu_to_le16() so the __counted_by_le() variant must be used:
struct brcmf_mf_params_le *mf_params;
...
mf_params_len = offsetof(struct brcmf_mf_params_le, data) +
(len - DOT11_MGMT_HDR_LEN);
mf_params = kzalloc(mf_params_len, GFP_KERNEL);
...
mf_params->len = cpu_to_le16(len - DOT11_MGMT_HDR_LEN);
Fixes: 66f909308a7c ("wifi: brcmfmac: cyw: support external SAE authentication in station mode")
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>>
Link: https://patch.msgid.link/20250721181810.work.575-kees@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2025-07-22
The patch is by me and fixes a potential NULL pointer deref in the CAN
device driver infrastructure. It can be triggered from user space.
* tag 'linux-can-fixes-for-6.16-20250722' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: netlink: can_changelink(): fix NULL pointer deref of struct can_priv::do_set_mode
====================
Link: https://patch.msgid.link/20250722110059.3664104-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Tariq Toukan says:
====================
mlx5-next updates 2025-07-22
The following pull-request contains common mlx5 updates
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Expose cable_length field in PFCC register
net/mlx5: Add IFC bits and enums for buf_ownership
net/mlx5: Add IFC bits to support RSS for IPSec offload
====================
Link: https://patch.msgid.link/1753175048-330044-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The test is supposed to observe that the 'clash_resolve' stat counter
incremented (i.e., the code path was covered).
This check was incorrect, 'conntrack -S' needs to be called in the
revevant namespace, not the initial netns.
The clash resolution logic in conntrack is only exercised when multiple
packets with the same udp quadruple race. Depending on kernel config,
number of CPUs, scheduling policy etc. this might not trigger even
after several retries. Thus the script eventually returns SKIP if the
retry count is exceeded.
The udpclash tool with also exit with a failure if it did not observe
the expected number of replies.
In the script, make a note of this but do not fail anymore, just check if
the clash resolution logic triggered after all.
Remove the 'single-core' test: while unlikely, with preemptible kernel it
should be possible to also trigger clash resolution logic.
With this change the test will either SKIP or pass.
Hard error could be restored later once its clear whats going on, so
also dump 'conntrack -S' when some packets went missing to see if
conntrack dropped them on insert.
Fixes: 78a588363587 ("selftests: netfilter: add conntrack clash resolution test case")
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20250721223652.6956-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-07-21 (i40e, ice, e1000e)
For i40e:
Dennis Chen adjusts reporting of VF Tx dropped to a more appropriate
field.
Jamie Bainbridge fixes a check which can cause a PF set VF MAC address
to be lost.
For ice:
Haoxiang Li adds an error check in DDP load to prevent NULL pointer
dereference.
For e1000e:
Jacek Kowalski adds workarounds for issues surrounding Tiger Lake
platforms with uninitialized NVMs.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
e1000e: ignore uninitialized checksum word on tgp
e1000e: disregard NVM checksum on tgp when valid checksum bit is not set
ice: Fix a null pointer dereference in ice_copy_and_init_pkg()
i40e: When removing VF MAC filters, only check PF-set MAC
i40e: report VF tx_dropped with tx_errors instead of tx_discards
====================
Link: https://patch.msgid.link/20250721173733.2248057-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Paolo Abeni says:
====================
tcp: a couple of fixes
This series includes a couple of follow-up for the recent tcp receiver
changes, addressing issues outlined by the nipa CI and the mptcp
self-tests.
Note that despite the affected self-tests where MPTCP ones, the issues
are really in the TCP code, see patch 1 for the details.
v1: https://lore.kernel.org/cover.1752859383.git.pabeni@redhat.com
====================
Link: https://patch.msgid.link/cover.1753118029.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The mentioned MIB is currently incremented even when a packet
with an old sequence number (i.e. a zero window probe) is received,
which is IMHO misleading.
Explicitly restrict such MIB increment at the relevant events.
Fixes: 6c758062c64d ("tcp: add LINUX_MIB_BEYOND_WINDOW")
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/20d147292eb4b13b6535e0ad6f56be64d9c330d3.1753118029.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The nipa CI is reporting frequent failures in the mptcp_connect
self-tests.
In the failing scenarios (TCP -> MPTCP) the involved sockets are
actually plain TCP ones, as fallback for passive socket at 2whs
time cause the MPTCP listener to actually create a TCP socket.
The transfer is stuck due to the receiver buffer being zero.
With the stronger check in place, tcp_clamp_window() can be invoked
while the TCP socket has sk_rmem_alloc == 0, and the receive buffer
will be zeroed, too.
Check for the critical condition in tcp_prune_queue() and just
drop the packet without shrinking the receiver buffer.
Fixes: 1d2fbaad7cd8 ("tcp: stronger sk_rcvbuf checks")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20c18165d3f848e1c5c1b782d88c1a5ab38b3f70.1753118029.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Tariq Toukan says:
====================
net/mlx5: misc changes 2025-07-21
This series by Lama contains misc enhancements to the SHAMPO parameters.
====================
Link: https://patch.msgid.link/1753081999-326247-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
SHAMPO structure holds two variations of the mkey, which is unnecessary,
a duplication that's repeated per rq.
Remove duplicate mkey information and keep only one version, the one
used in the fast path, rename field to reflect field type clearly.
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/1753081999-326247-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Refactor mlx5e_shampo_get_log_hd_entry_size() as macro, for more
simplicity.
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/1753081999-326247-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The reservation size formula can be reduced to a simple evaluation of
MLX5E_SHAMPO_WQ_RESRV_SIZE. This leaves mlx5e_shampo_get_log_rsrv_size()
with one single use, which can be replaced with a macro for simplicity.
Also, function mlx5e_shampo_get_log_rsrv_size() is used only throughout
params.c, make it static.
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/1753081999-326247-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Background
==========
When TCP retransmits a packet due to missing ACKs, the
retransmission may fail for various reasons (e.g., packets
stuck in driver queues, receiver zero windows, or routing issues).
The original tcp_retransmit_skb tracepoint:
'commit e086101b150a ("tcp: add a tracepoint for tcp retransmission")'
lacks visibility into these failure causes, making production
diagnostics difficult.
Solution
========
Adds the retval("err") to the tcp_retransmit_skb tracepoint.
Enables users to know why some tcp retransmission failed and
users can filter retransmission failures by retval.
Compatibility description
=========================
This patch extends the tcp_retransmit_skb tracepoint
by adding a new "err" field at the end of its
existing structure (within TP_STRUCT__entry). The
compatibility implications are detailed as follows:
1) Structural compatibility for legacy user-space tools
Legacy tools/BPF programs accessing existing fields
(by offset or name) can still work without modification
or recompilation.The new field is appended to the end,
preserving original memory layout.
2) Note: semantic changes
The original tracepoint primarily only focused on
successfully retransmitted packets. With this patch,
the tracepoint now can figure out packets that may
terminate early due to specific reasons. For accurate
statistics, users should filter using "err" to
distinguish outcomes.
Before patched:
field:const void * skbaddr; offset:8; size:8; signed:0;
field:const void * skaddr; offset:16; size:8; signed:0;
field:int state; offset:24; size:4; signed:1;
field:__u16 sport; offset:28; size:2; signed:0;
field:__u16 dport; offset:30; size:2; signed:0;
field:__u16 family; offset:32; size:2; signed:0;
field:__u8 saddr[4]; offset:34; size:4; signed:0;
field:__u8 daddr[4]; offset:38; size:4; signed:0;
field:__u8 saddr_v6[16]; offset:42; size:16; signed:0;
field:__u8 daddr_v6[16]; offset:58; size:16; signed:0;
print fmt: "skbaddr=%p skaddr=%p family=%s sport=%hu dport=%hu saddr=%pI4 daddr=%pI4 saddrv6=%pI6c daddrv6=%pI6c state=%s"
After patched:
field:const void * skbaddr; offset:8; size:8; signed:0;
field:const void * skaddr; offset:16; size:8; signed:0;
field:int state; offset:24; size:4; signed:1;
field:__u16 sport; offset:28; size:2; signed:0;
field:__u16 dport; offset:30; size:2; signed:0;
field:__u16 family; offset:32; size:2; signed:0;
field:__u8 saddr[4]; offset:34; size:4; signed:0;
field:__u8 daddr[4]; offset:38; size:4; signed:0;
field:__u8 saddr_v6[16]; offset:42; size:16; signed:0;
field:__u8 daddr_v6[16]; offset:58; size:16; signed:0;
field:int err; offset:76; size:4; signed:1;
print fmt: "skbaddr=%p skaddr=%p family=%s sport=%hu dport=%hu saddr=%pI4 daddr=%pI4 saddrv6=%pI6c daddrv6=%pI6c state=%s err=%d"
Co-developed-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: Fan Yu <fan.yu9@zte.com.cn>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250721111607626_BDnIJB0ywk6FghN63bor@zte.com.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add comments on endif & endmenu blocks. This can save time
when searching & trying to understand kconfig menu dependencies.
The other endif & endmenu statements are already commented like this.
This makes it similar to drivers/net/Kconfig, which is already
commented like this.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250721020420.3555128-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Mohsin Bashir says:
====================
selftests: drv-net: Test XDP native support
This patch series add tests to validate XDP native support for PASS,
DROP, ABORT, and TX actions, as well as headroom and tailroom adjustment.
For adjustment tests, validate support for both the extension and
shrinking cases across various packet sizes and offset values.
The pass criteria for head/tail adjustment tests require that at-least
one adjustment value works for at-least one packet size. This ensure
that the variability in maximum supported head/tail adjustment offset
across different drivers is being incorporated.
The results reported in this series are based on netdevsim. However,
the series is tested against multiple other drivers including fbnic.
Note: The XDP support for fbnic will be added later.
====================
Link: https://patch.msgid.link/20250719083059.3209169-1-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add test to validate the headroom adjustment support for both extension
and the shrinking cases. For the extension part, eat up space from
the start of payload data whereas, for the shrinking part, populate
the newly available space with a tag. In the user-space, validate that a
test string is manipulated accordingly.
The negative and positive offset values result in shrinking and growing of
headroom (growing and shrinking of payload) respectively.
TAP version 13
1..9
ok 1 xdp.test_xdp_native_pass_sb
ok 2 xdp.test_xdp_native_pass_mb
ok 3 xdp.test_xdp_native_drop_sb
ok 4 xdp.test_xdp_native_drop_mb
ok 5 xdp.test_xdp_native_tx_mb
\# Failed run: pkt_sz 512, ... offset 1. Reason: Adjustment failed
ok 6 xdp.test_xdp_native_adjst_tail_grow_data
ok 7 xdp.test_xdp_native_adjst_tail_shrnk_data
\# Failed run: pkt_sz 512, ... offset -128. Reason: Adjustment failed
ok 8 xdp.test_xdp_native_adjst_head_grow_data
\# Failed run: pkt_sz (512) > HDS threshold (0) and offset 64 > 48
ok 9 xdp.test_xdp_native_adjst_head_shrnk_data
\# Totals: pass:9 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20250719083059.3209169-6-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add test to validate support for the two cases of tail adjustment: 1)
tail extension, and 2) tail shrinking across different frame sizes and
offset values. For each of the two cases, test both the single and
multi-buffer cases by choosing appropriate packet size.
The negative offset value result in growing of tailroom (shrinking of
payload) while the positive offset result in shrinking of tailroom
(growing of payload).
Since the support for tail adjustment varies across drivers, classify the
test as pass if at least one combination of packet size and offset from a
pre-selected list results in a successful run. In case of an unsuccessful
run, report the failure and highlight the packet size and offset values
that caused the test to fail, as well as the values that resulted in the
last successful run.
Note: The growing part of this test for netdevsim may appear flaky when
the offset value is larger than 1. This behavior occurs because tailroom
is not explicitly reserved for netdevsim, with 1 being the typical
tailroom value. However, in certain cases, such as payload being the last
in the page with additional available space, the truesize is expanded.
This also result increases the tailroom causing the test to pass
intermittently. In contrast, when tailrrom is explicitly reserved, such
as in the of fbnic, the test results are deterministic.
./drivers/net/xdp.py
TAP version 13
1..7
ok 1 xdp.test_xdp_native_pass_sb
ok 2 xdp.test_xdp_native_pass_mb
ok 3 xdp.test_xdp_native_drop_sb
ok 4 xdp.test_xdp_native_drop_mb
ok 5 xdp.test_xdp_native_tx_mb
\# Failed run: ... successful run: ... offset 1. Reason: Adjustment failed
ok 6 xdp.test_xdp_native_adjst_tail_grow_data
ok 7 xdp.test_xdp_native_adjst_tail_shrnk_data
\# Totals: pass:7 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20250719083059.3209169-5-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add test to verify the XDP_TX functionality by generating traffic from a
remote node on a specific UDP port and redirecting it back to the sender.
./drivers/net/xdp.py
TAP version 13
1..5
ok 1 xdp.test_xdp_native_pass_sb
ok 2 xdp.test_xdp_native_pass_mb
ok 3 xdp.test_xdp_native_drop_sb
ok 4 xdp.test_xdp_native_drop_mb
ok 5 xdp.test_xdp_native_tx_mb
\# Totals: pass:5 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20250719083059.3209169-4-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Test XDP_PASS/DROP in single buffer and multi buffer mode when
XDP native support is available.
./drivers/net/xdp.py
TAP version 13
1..4
ok 1 xdp.test_xdp_native_pass_sb
ok 2 xdp.test_xdp_native_pass_mb
ok 3 xdp.test_xdp_native_drop_sb
ok 4 xdp.test_xdp_native_drop_mb
\# Totals: pass:4 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20250719083059.3209169-3-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add basic XDP support by hooking in do_xdp_generic().
This should be enough to validate most basic XDP tests.
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20250719083059.3209169-2-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As reported by the kernel test robot, a recent patch introduced an
unnecessary semicolon. Remove it.
Fixes: 55e8ff842051 ("drm/bridge: ti-sn65dsi86: Add HPD for DisplayPort connector type")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506301704.0SBj6ply-lkp@intel.com/
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250714130631.1.I1cfae3222e344a3b3c770d079ee6b6f7f3b5d636@changeid
|
|
Hariprasad Kelam says:
====================
Octeontx2-af: RPM: misc feaures
This series patches adds different features like debugfs
support for shared firmware structure and DMAC filter
related enhancements.
Patch1: Saves interface MAC address configured from DMAC filters.
Patch2: Disables the stale DMAC filters in driver initialization
Patch3: Configure dma mask for CGX/RPM drivers
Patch4: Debugfs support for shared firmware data.
====================
Link: https://patch.msgid.link/20250720163638.1560323-1-hkelam@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
MAC address, Link modes (supported and advertised) and eeprom data
for the Netdev interface are read from the shared firmware data.
This patch adds debugfs support for the same.
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://patch.msgid.link/20250720163638.1560323-5-hkelam@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
CGX/RPM driver supports 48 bits of DMA addressing. Update
the DMA mask accordingly.
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250720163638.1560323-4-hkelam@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
