| Age | Commit message (Collapse) | Author |
|---|
|
Extend the resize test:
- continuously dump table both via /proc and ctnetlink interfaces while
table is resized in a loop.
- if socat is available, send udp packets in additon to ping requests.
- increase/decrease the icmp and udp timeouts while resizes are happening.
This makes sure we also exercise the 'ct has expired' check that happens
on conntrack lookup.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The Lenovo Yoga Book 9i GenX has the wrong values in the cirrus,dev-index
_DSD property. Add a fixup for this model to ignore the property and
hardcode the index from the I2C bus address.
The error in the cirrus,dev-index property would prevent the second amp
instance from probing. The component binding would never see all the
required instances and so there would not be a binding between
patch_realtek.c and the cs35l56 driver.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reported-by: Brian Howard <blhoward2@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220228
Link: https://patch.msgid.link/20250714110154.204740-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Currently cpu hotplug with the PREEMPT_RT option set in the kernel is
not supported because the underlying generic power domain functions
used in the cpu hotplug callbacks are incompatible from a lock point
of view. This situation prevents the suspend to idle to reach the
deepest idle state for the "cluster" as identified in the
undermentioned commit.
Use the compatible ones when PREEMPT_RT is enabled and remove the
boolean disabling the hotplug callbacks with this option.
With this change the platform can reach the deepest idle state
allowing at suspend time to consume less power.
Tested-on Lenovo T14s with the following script:
echo 0 > /sys/devices/system/cpu/cpu3/online
BEFORE=$(cat /sys/kernel/debug/pm_genpd/power-domain-cpu-cluster0/idle_states | grep S0 | awk '{ print $3 }') ;
rtcwake -s 1 -m mem;
AFTER=$(cat /sys/kernel/debug/pm_genpd/power-domain-cpu-cluster0/idle_states | grep S0 | awk '{ print $3 }');
if [ $BEFORE -lt $AFTER ]; then
echo "Test successful"
else
echo "Test failed"
fi
echo 1 > /sys/devices/system/cpu/cpu3/online
Fixes: 1c4b2932bd62 ("cpuidle: psci: Enable the hierarchical topology for s2idle on PREEMPT_RT")
Cc: Raghavendra Kakarla <quic_rkakarla@quicinc.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250709154728.733920-1-daniel.lezcano@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Support mute LED on keyboard for Lenovo Yoga series products with
Realtek ALC287 chipset.
Tested on Lenovo Slim Pro 7 14APH8.
[ slight comment cleanup by tiwai ]
Signed-off-by: Jackie Dong <xy-jackie@139.com>
Link: https://patch.msgid.link/20250714094655.4657-1-xy-jackie@139.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
David Howells <dhowells@redhat.com> says:
Here are a couple of patches that fix the use of fscaching with ceph:
(1) Fix the read collector to mark the write request that it creates to copy
data to the cache with NETFS_RREQ_OFFLOAD_COLLECTION so that it will run
the write collector on a workqueue as it's meant to run in the background
and the app isn't going to wait for it.
(2) Fix the read collector to wake up the copy-to-cache write request after
it sets NETFS_RREQ_ALL_QUEUED if the write request doesn't have any
subrequests left on it. ALL_QUEUED indicates that there won't be any
more subreqs coming and the collector should clean up - except that an
event is needed to trigger that, but it only gets events from subreq
termination and so the last event can beat us to setting ALL_QUEUED.
* patches from https://lore.kernel.org/20250711151005.2956810-1-dhowells@redhat.com:
netfs: Fix race between cache write completion and ALL_QUEUED being set
netfs: Fix copy-to-cache so that it performs collection with ceph+fscache
Link: https://lore.kernel.org/20250711151005.2956810-1-dhowells@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When netfslib is issuing subrequests, the subrequests start processing
immediately and may complete before we reach the end of the issuing
function. At the end of the issuing function we set NETFS_RREQ_ALL_QUEUED
to indicate to the collector that we aren't going to issue any more subreqs
and that it can do the final notifications and cleanup.
Now, this isn't a problem if the request is synchronous
(NETFS_RREQ_OFFLOAD_COLLECTION is unset) as the result collection will be
done in-thread and we're guaranteed an opportunity to run the collector.
However, if the request is asynchronous, collection is primarily triggered
by the termination of subrequests queuing it on a workqueue. Now, a race
can occur here if the app thread sets ALL_QUEUED after the last subrequest
terminates.
This can happen most easily with the copy2cache code (as used by Ceph)
where, in the collection routine of a read request, an asynchronous write
request is spawned to copy data to the cache. Folios are added to the
write request as they're unlocked, but there may be a delay before
ALL_QUEUED is set as the write subrequests may complete before we get
there.
If all the write subreqs have finished by the ALL_QUEUED point, no further
events happen and the collection never happens, leaving the request
hanging.
Fix this by queuing the collector after setting ALL_QUEUED. This is a bit
heavy-handed and it may be sufficient to do it only if there are no extant
subreqs.
Also add a tracepoint to cross-reference both requests in a copy-to-request
operation and add a trace to the netfs_rreq tracepoint to indicate the
setting of ALL_QUEUED.
Fixes: e2d46f2ec332 ("netfs: Change the read result collector to only use one work item")
Reported-by: Max Kellermann <max.kellermann@ionos.com>
Link: https://lore.kernel.org/r/CAKPOu+8z_ijTLHdiCYGU_Uk7yYD=shxyGLwfe-L7AV3DhebS3w@mail.gmail.com/
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/20250711151005.2956810-3-dhowells@redhat.com
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
cc: Paulo Alcantara <pc@manguebit.org>
cc: Viacheslav Dubeyko <slava@dubeyko.com>
cc: Alex Markuze <amarkuze@redhat.com>
cc: Ilya Dryomov <idryomov@gmail.com>
cc: netfs@lists.linux.dev
cc: ceph-devel@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The netfs copy-to-cache that is used by Ceph with local caching sets up a
new request to write data just read to the cache. The request is started
and then left to look after itself whilst the app continues. The request
gets notified by the backing fs upon completion of the async DIO write, but
then tries to wake up the app because NETFS_RREQ_OFFLOAD_COLLECTION isn't
set - but the app isn't waiting there, and so the request just hangs.
Fix this by setting NETFS_RREQ_OFFLOAD_COLLECTION which causes the
notification from the backing filesystem to put the collection onto a work
queue instead.
Fixes: e2d46f2ec332 ("netfs: Change the read result collector to only use one work item")
Reported-by: Max Kellermann <max.kellermann@ionos.com>
Link: https://lore.kernel.org/r/CAKPOu+8z_ijTLHdiCYGU_Uk7yYD=shxyGLwfe-L7AV3DhebS3w@mail.gmail.com/
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/20250711151005.2956810-2-dhowells@redhat.com
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
cc: Paulo Alcantara <pc@manguebit.org>
cc: Viacheslav Dubeyko <slava@dubeyko.com>
cc: Alex Markuze <amarkuze@redhat.com>
cc: Ilya Dryomov <idryomov@gmail.com>
cc: netfs@lists.linux.dev
cc: ceph-devel@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The commit e6fe3f422be1 ("sched: Make multiple runqueue task counters
32-bit") changed nr_uninterruptible to an unsigned int. But the
nr_uninterruptible values for each of the CPU runqueues can grow to
large numbers, sometimes exceeding INT_MAX. This is valid, if, over
time, a large number of tasks are migrated off of one CPU after going
into an uninterruptible state. Only the sum of all nr_interruptible
values across all CPUs yields the correct result, as explained in a
comment in kernel/sched/loadavg.c.
Change the type of nr_uninterruptible back to unsigned long to prevent
overflows, and thus the miscalculation of load average.
Fixes: e6fe3f422be1 ("sched: Make multiple runqueue task counters 32-bit")
Signed-off-by: Aruna Ramakrishna <aruna.ramakrishna@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250709173328.606794-1-aruna.ramakrishna@oracle.com
|
|
[into #fixes, unless somebody objects]
Lifetime of new_dn_mark is controlled by that of its ->fsn_mark,
pointed to by new_fsn_mark. Unfortunately, a failure exit had
been inserted between the allocation of new_dn_mark and the
call of fsnotify_init_mark(), ending up with a leak.
Fixes: 1934b212615d "file: reclaim 24 bytes from f_owner"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/20250712171843.GB1880847@ZenIV
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
i2c-host-fixes for v6.16-rc6
omap: add missing error check and fix PM disable in probe error
path.
stm32: unmap DMA buffer on transfer failure and use correct
device when mapping and unmapping during transfers.
|
|
Sabrina Dubroca says:
====================
IPcomp tunnel states have an associated fallback tunnel, a keep a
reference on the corresponding xfrm_state, to allow deleting that
extra state when it's not needed anymore. These states cause issues
during netns deletion.
Commit f75a2804da39 ("xfrm: destroy xfrm_state synchronously on net
exit path") tried to address these problems but doesn't fully solve
them, and slowed down netns deletion by adding one synchronize_rcu per
deleted state.
The first patch solves the problem by moving the fallback state
deletion earlier (when we delete the user state, rather than at
destruction), then we can revert the previous fix.
====================
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
When a parent lease key is passed to the server during a create operation
while holding a directory lease, the server may not send a lease break to
the client. In such cases, it becomes the client’s responsibility to
ensure cache consistency.
This led to a problem where directory listings (e.g., `ls` or `readdir`)
could return stale results after a new file is created.
eg:
ls /mnt/share/
touch /mnt/share/file1
ls /mnt/share/
In this scenario, the final `ls` may not show `file1` due to the stale
directory cache.
For now, fix this by marking the cached directory as invalid if using
the parent lease key during create, and explicitly closing the cached
directory after successful file creation.
Fixes: 037e1bae588eacf ("smb: client: use ParentLeaseKey in cifs_do_create")
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The CVE-2024-50047 fix removed asynchronous crypto handling from
crypt_message(), assuming all crypto operations are synchronous.
However, when hardware crypto accelerators are used, this can cause
use-after-free crashes:
crypt_message()
// Allocate the creq buffer containing the req
creq = smb2_get_aead_req(..., &req);
// Async encryption returns -EINPROGRESS immediately
rc = enc ? crypto_aead_encrypt(req) : crypto_aead_decrypt(req);
// Free creq while async operation is still in progress
kvfree_sensitive(creq, ...);
Hardware crypto modules often implement async AEAD operations for
performance. When crypto_aead_encrypt/decrypt() returns -EINPROGRESS,
the operation completes asynchronously. Without crypto_wait_req(),
the function immediately frees the request buffer, leading to crashes
when the driver later accesses the freed memory.
This results in a use-after-free condition when the hardware crypto
driver later accesses the freed request structure, leading to kernel
crashes with NULL pointer dereferences.
The issue occurs because crypto_alloc_aead() with mask=0 doesn't
guarantee synchronous operation. Even without CRYPTO_ALG_ASYNC in
the mask, async implementations can be selected.
Fix by restoring the async crypto handling:
- DECLARE_CRYPTO_WAIT(wait) for completion tracking
- aead_request_set_callback() for async completion notification
- crypto_wait_req() to wait for operation completion
This ensures the request buffer isn't freed until the crypto operation
completes, whether synchronous or asynchronous, while preserving the
CVE-2024-50047 fix.
Fixes: b0abcd65ec54 ("smb: client: fix UAF in async decryption")
Link: https://lore.kernel.org/all/8b784a13-87b0-4131-9ff9-7a8993538749@huaweicloud.com/
Cc: stable@vger.kernel.org
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Wang Zhaolong <wangzhaolong@huaweicloud.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
A race condition can occur in cifs_oplock_break() leading to a
use-after-free of the cinode structure when unmounting:
cifs_oplock_break()
_cifsFileInfo_put(cfile)
cifsFileInfo_put_final()
cifs_sb_deactive()
[last ref, start releasing sb]
kill_sb()
kill_anon_super()
generic_shutdown_super()
evict_inodes()
dispose_list()
evict()
destroy_inode()
call_rcu(&inode->i_rcu, i_callback)
spin_lock(&cinode->open_file_lock) <- OK
[later] i_callback()
cifs_free_inode()
kmem_cache_free(cinode)
spin_unlock(&cinode->open_file_lock) <- UAF
cifs_done_oplock_break(cinode) <- UAF
The issue occurs when umount has already released its reference to the
superblock. When _cifsFileInfo_put() calls cifs_sb_deactive(), this
releases the last reference, triggering the immediate cleanup of all
inodes under RCU. However, cifs_oplock_break() continues to access the
cinode after this point, resulting in use-after-free.
Fix this by holding an extra reference to the superblock during the
entire oplock break operation. This ensures that the superblock and
its inodes remain valid until the oplock break completes.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220309
Fixes: b98749cac4a6 ("CIFS: keep FileInfo handle live during oplock break")
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Wang Zhaolong <wangzhaolong@huaweicloud.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Running lwt_dst_cache_ref_loop.sh in selftest with KASAN triggers
the splat below [0].
rpl_do_srh_inline() fetches ipv6_hdr(skb) and accesses it after
skb_cow_head(), which is illegal as the header could be freed then.
Let's fix it by making oldhdr to a local struct instead of a pointer.
[0]:
[root@fedora net]# ./lwt_dst_cache_ref_loop.sh
...
TEST: rpl (input)
[ 57.631529] ==================================================================
BUG: KASAN: slab-use-after-free in rpl_do_srh_inline.isra.0 (net/ipv6/rpl_iptunnel.c:174)
Read of size 40 at addr ffff888122bf96d8 by task ping6/1543
CPU: 50 UID: 0 PID: 1543 Comm: ping6 Not tainted 6.16.0-rc5-01302-gfadd1e6231b1 #23 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl (lib/dump_stack.c:122)
print_report (mm/kasan/report.c:409 mm/kasan/report.c:521)
kasan_report (mm/kasan/report.c:221 mm/kasan/report.c:636)
kasan_check_range (mm/kasan/generic.c:175 (discriminator 1) mm/kasan/generic.c:189 (discriminator 1))
__asan_memmove (mm/kasan/shadow.c:94 (discriminator 2))
rpl_do_srh_inline.isra.0 (net/ipv6/rpl_iptunnel.c:174)
rpl_input (net/ipv6/rpl_iptunnel.c:201 net/ipv6/rpl_iptunnel.c:282)
lwtunnel_input (net/core/lwtunnel.c:459)
ipv6_rcv (./include/net/dst.h:471 (discriminator 1) ./include/net/dst.h:469 (discriminator 1) net/ipv6/ip6_input.c:79 (discriminator 1) ./include/linux/netfilter.h:317 (discriminator 1) ./include/linux/netfilter.h:311 (discriminator 1) net/ipv6/ip6_input.c:311 (discriminator 1))
__netif_receive_skb_one_core (net/core/dev.c:5967)
process_backlog (./include/linux/rcupdate.h:869 net/core/dev.c:6440)
__napi_poll.constprop.0 (net/core/dev.c:7452)
net_rx_action (net/core/dev.c:7518 net/core/dev.c:7643)
handle_softirqs (kernel/softirq.c:579)
do_softirq (kernel/softirq.c:480 (discriminator 20))
</IRQ>
<TASK>
__local_bh_enable_ip (kernel/softirq.c:407)
__dev_queue_xmit (net/core/dev.c:4740)
ip6_finish_output2 (./include/linux/netdevice.h:3358 ./include/net/neighbour.h:526 ./include/net/neighbour.h:540 net/ipv6/ip6_output.c:141)
ip6_finish_output (net/ipv6/ip6_output.c:215 net/ipv6/ip6_output.c:226)
ip6_output (./include/linux/netfilter.h:306 net/ipv6/ip6_output.c:248)
ip6_send_skb (net/ipv6/ip6_output.c:1983)
rawv6_sendmsg (net/ipv6/raw.c:588 net/ipv6/raw.c:918)
__sys_sendto (net/socket.c:714 (discriminator 1) net/socket.c:729 (discriminator 1) net/socket.c:2228 (discriminator 1))
__x64_sys_sendto (net/socket.c:2231)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1))
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
RIP: 0033:0x7f68cffb2a06
Code: 5d e8 41 8b 93 08 03 00 00 59 5e 48 83 f8 fc 75 19 83 e2 39 83 fa 08 75 11 e8 26 ff ff ff 66 0f 1f 44 00 00 48 8b 45 10 0f 05 <48> 8b 5d f8 c9 c3 0f 1f 40 00 f3 0f 1e fa 55 48 89 e5 48 83 ec 08
RSP: 002b:00007ffefb7c53d0 EFLAGS: 00000202 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000564cd69f10a0 RCX: 00007f68cffb2a06
RDX: 0000000000000040 RSI: 0000564cd69f10a4 RDI: 0000000000000003
RBP: 00007ffefb7c53f0 R08: 0000564cd6a032ac R09: 000000000000001c
R10: 0000000000000000 R11: 0000000000000202 R12: 0000564cd69f10a4
R13: 0000000000000040 R14: 00007ffefb7c66e0 R15: 0000564cd69f10a0
</TASK>
Allocated by task 1543:
kasan_save_stack (mm/kasan/common.c:48)
kasan_save_track (mm/kasan/common.c:60 (discriminator 1) mm/kasan/common.c:69 (discriminator 1))
__kasan_slab_alloc (mm/kasan/common.c:319 mm/kasan/common.c:345)
kmem_cache_alloc_node_noprof (./include/linux/kasan.h:250 mm/slub.c:4148 mm/slub.c:4197 mm/slub.c:4249)
kmalloc_reserve (net/core/skbuff.c:581 (discriminator 88))
__alloc_skb (net/core/skbuff.c:669)
__ip6_append_data (net/ipv6/ip6_output.c:1672 (discriminator 1))
ip6_append_data (net/ipv6/ip6_output.c:1859)
rawv6_sendmsg (net/ipv6/raw.c:911)
__sys_sendto (net/socket.c:714 (discriminator 1) net/socket.c:729 (discriminator 1) net/socket.c:2228 (discriminator 1))
__x64_sys_sendto (net/socket.c:2231)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1))
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
Freed by task 1543:
kasan_save_stack (mm/kasan/common.c:48)
kasan_save_track (mm/kasan/common.c:60 (discriminator 1) mm/kasan/common.c:69 (discriminator 1))
kasan_save_free_info (mm/kasan/generic.c:579 (discriminator 1))
__kasan_slab_free (mm/kasan/common.c:271)
kmem_cache_free (mm/slub.c:4643 (discriminator 3) mm/slub.c:4745 (discriminator 3))
pskb_expand_head (net/core/skbuff.c:2274)
rpl_do_srh_inline.isra.0 (net/ipv6/rpl_iptunnel.c:158 (discriminator 1))
rpl_input (net/ipv6/rpl_iptunnel.c:201 net/ipv6/rpl_iptunnel.c:282)
lwtunnel_input (net/core/lwtunnel.c:459)
ipv6_rcv (./include/net/dst.h:471 (discriminator 1) ./include/net/dst.h:469 (discriminator 1) net/ipv6/ip6_input.c:79 (discriminator 1) ./include/linux/netfilter.h:317 (discriminator 1) ./include/linux/netfilter.h:311 (discriminator 1) net/ipv6/ip6_input.c:311 (discriminator 1))
__netif_receive_skb_one_core (net/core/dev.c:5967)
process_backlog (./include/linux/rcupdate.h:869 net/core/dev.c:6440)
__napi_poll.constprop.0 (net/core/dev.c:7452)
net_rx_action (net/core/dev.c:7518 net/core/dev.c:7643)
handle_softirqs (kernel/softirq.c:579)
do_softirq (kernel/softirq.c:480 (discriminator 20))
__local_bh_enable_ip (kernel/softirq.c:407)
__dev_queue_xmit (net/core/dev.c:4740)
ip6_finish_output2 (./include/linux/netdevice.h:3358 ./include/net/neighbour.h:526 ./include/net/neighbour.h:540 net/ipv6/ip6_output.c:141)
ip6_finish_output (net/ipv6/ip6_output.c:215 net/ipv6/ip6_output.c:226)
ip6_output (./include/linux/netfilter.h:306 net/ipv6/ip6_output.c:248)
ip6_send_skb (net/ipv6/ip6_output.c:1983)
rawv6_sendmsg (net/ipv6/raw.c:588 net/ipv6/raw.c:918)
__sys_sendto (net/socket.c:714 (discriminator 1) net/socket.c:729 (discriminator 1) net/socket.c:2228 (discriminator 1))
__x64_sys_sendto (net/socket.c:2231)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1))
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
The buggy address belongs to the object at ffff888122bf96c0
which belongs to the cache skbuff_small_head of size 704
The buggy address is located 24 bytes inside of
freed 704-byte region [ffff888122bf96c0, ffff888122bf9980)
The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x122bf8
head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0x200000000000040(head|node=0|zone=2)
page_type: f5(slab)
raw: 0200000000000040 ffff888101fc0a00 ffffea000464dc00 0000000000000002
raw: 0000000000000000 0000000080270027 00000000f5000000 0000000000000000
head: 0200000000000040 ffff888101fc0a00 ffffea000464dc00 0000000000000002
head: 0000000000000000 0000000080270027 00000000f5000000 0000000000000000
head: 0200000000000003 ffffea00048afe01 00000000ffffffff 00000000ffffffff
head: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888122bf9580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888122bf9600: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
>ffff888122bf9680: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
^
ffff888122bf9700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888122bf9780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
Fixes: a7a29f9c361f8 ("net: ipv6: add rpl sr tunnel")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We default to raising an exception when unknown attrs are found
to make sure those are noticed during development.
When YNL CLI is "installed" and used by sysadmins erroring out
is not going to be helpful. It's far more likely the user space
is older than the kernel in that case, than that some attr is
misdefined or missing.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Previously, only split rbios allocated in io_read.c would be removed
from the async obj list.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
It is currently possible to configure a kernel with all Intel SoC
configs as loadable modules, but the board config as built-in. This
causes a link failure in the reference to the snd_soc_sof.ko module:
x86_64-linux-ld: sound/soc/intel/boards/sof_rt5682.o: in function `sof_rt5682_hw_params':
sof_rt5682.c:(.text+0x1f9): undefined reference to `sof_dai_get_mclk'
x86_64-linux-ld: sof_rt5682.c:(.text+0x234): undefined reference to `sof_dai_get_bclk'
x86_64-linux-ld: sound/soc/intel/boards/sof_rt5682.o: in function `sof_rt5682_codec_init':
sof_rt5682.c:(.text+0x3e0): undefined reference to `sof_dai_get_mclk'
x86_64-linux-ld: sound/soc/intel/boards/sof_cs42l42.o: in function `sof_cs42l42_hw_params':
sof_cs42l42.c:(.text+0x2a): undefined reference to `sof_dai_get_bclk'
x86_64-linux-ld: sound/soc/intel/boards/sof_nau8825.o: in function `sof_nau8825_hw_params':
sof_nau8825.c:(.text+0x7f): undefined reference to `sof_dai_get_bclk'
x86_64-linux-ld: sound/soc/intel/boards/sof_da7219.o: in function `da7219_codec_init':
sof_da7219.c:(.text+0xbf): undefined reference to `sof_dai_get_mclk'
x86_64-linux-ld: sound/soc/intel/boards/sof_maxim_common.o: in function `max_98373_hw_params':
sof_maxim_common.c:(.text+0x6f9): undefined reference to `sof_dai_get_tdm_slots'
x86_64-linux-ld: sound/soc/intel/boards/sof_realtek_common.o: in function `rt1015_hw_params':
sof_realtek_common.c:(.text+0x54c): undefined reference to `sof_dai_get_bclk'
x86_64-linux-ld: sound/soc/intel/boards/sof_realtek_common.o: in function `rt1308_hw_params':
sof_realtek_common.c:(.text+0x702): undefined reference to `sof_dai_get_mclk'
x86_64-linux-ld: sound/soc/intel/boards/sof_cirrus_common.o: in function `cs35l41_hw_params':
sof_cirrus_common.c:(.text+0x2f): undefined reference to `sof_dai_get_bclk'
Add an optional dependency on SND_SOC_SOF_INTEL_COMMON, to ensure that whenever
the SOF support is in a loadable module, none of the board code can be built-in.
This may be be a little heavy-handed, but I also don't see a reason why one would
want the boards to be built-in but not the SoC, so it shouldn't actually cause
any usability problems.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20250709145626.64125-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The patch fixes an issue with the dmic data pin connected to GPIO2.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Link: https://patch.msgid.link/20250711034813.3278989-1-oder_chiou@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
'struct regmap_config' are not modified in these drivers. They be
statically defined instead of allocated and populated at run-time.
The main benefits are:
- it saves some memory at runtime
- the structures can be declared as 'const', which is always better for
structures that hold some function pointers
- the code is less verbose
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Fixes for a few clk drivers and bindings:
- Add a missing property to the Mediatek MT8188 clk binding to
keep binding checks happy
- Avoid an OOB by setting the correct number of parents in
dispmix_csr_clk_dev_data
- Allocate clk_hw structs early in probe to avoid an ordering
issue where clk_parent_data points to an unallocated clk_hw
when the child clk is registered before the parent clk in the
SCMI clk driver
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
dt-bindings: clock: mediatek: Add #reset-cells property for MT8188
clk: imx: Fix an out-of-bounds access in dispmix_csr_clk_dev_data
clk: scmi: Handle case where child clocks are initialized before their parents
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Update Kirill's email address
- Allow hugetlb PMD sharing only on 64-bit as it doesn't make a whole
lotta sense on 32-bit
- Add fixes for a misconfigured AMD Zen2 client which wasn't even
supposed to run Linux
* tag 'x86_urgent_for_v6.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Update Kirill Shutemov's email address for TDX
x86/mm: Disable hugetlb page table sharing on 32-bit
x86/CPU/AMD: Disable INVLPGB on Zen2
x86/rdrand: Disable RDSEED on AMD Cyan Skillfish
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Fix a case of recursive locking in the MSI code
- Fix a randconfig build failure in armada-370-xp irqchip
* tag 'irq_urgent_for_v6.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/irq-msi-lib: Fix build with PCI disabled
PCI/MSI: Prevent recursive locking in pci_msix_write_tph_tag()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fix from Borislav Petkov:
- Prevent perf_sigtrap() from observing an exiting task and warning
about it
* tag 'perf_urgent_for_v6.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix WARN in perf_sigtrap()
|
|
The commit "13bcd440f2ff nvmem: core: verify cell's raw_len" caused an
extension of the "mac-address" cell from 6 to 8 bytes due to word_size
of 4 bytes. This led to a required byte swap of the full buffer length,
which caused truncation of the mac-address when read.
Previously, the mac-address was incorrectly truncated from
70:B3:D5:14:E9:0E to 00:00:70:B3:D5:14.
Fix the issue by swapping only the first 6 bytes to correctly pass the
mac-address to the upper layers.
Fixes: 13bcd440f2ff ("nvmem: core: verify cell's raw_len")
Cc: stable@vger.kernel.org
Signed-off-by: Steffen Bätz <steffen@innosonix.de>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://lore.kernel.org/r/20250712181729.6495-3-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For UTMI+ PHY, according to programming guide, first should be set
PMUACTV bit then STOPPCLK bit. Otherwise, when the device issues
Remote Wakeup, then host notices disconnect instead.
For ULPI PHY, above mentioned bits must be set in reversed order:
STOPPCLK then PMUACTV.
Fixes: 4483ef3c1685 ("usb: dwc2: Add hibernation updates for ULPI PHY")
Cc: stable <stable@kernel.org>
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/692110d3c3d9bb2a91cedf24528a7710adc55452.1751881374.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Leaving the USB BCR asserted prevents the associated GDSC to turn on. This
blocks any subsequent attempts of probing the device, e.g. after a probe
deferral, with the following showing in the log:
[ 1.332226] usb30_prim_gdsc status stuck at 'off'
Leave the BCR deasserted when exiting the driver to avoid this issue.
Cc: stable <stable@kernel.org>
Fixes: a4333c3a6ba9 ("usb: dwc3: Add Qualcomm DWC3 glue driver")
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250709132900.3408752-1-krishna.kurapati@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Extend the process_unknown handing to enum values and flags.
Tested by removing entries from rt-link.yaml and rt-neigh.yaml:
./tools/net/ynl/pyynl/cli.py --family rt-link --dump getlink \
--process-unknown --output-json | jq '.[0] | ."ifi-flags"'
[
"up",
"Unknown(6)",
"loopback",
"Unknown(16)"
]
./tools/net/ynl/pyynl/cli.py --family rt-neigh --dump getneigh \
--process-unknown --output-json | jq '.[] | ."ndm-type"'
"unicast"
"Unknown(5)"
"Unknown(5)"
"unicast"
"Unknown(5)"
"unicast"
"broadcast"
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Syzbot found a buffer underflow in __hid_request(). Add a related test
case for it.
It's not perfect, but it allows to catch a corner case when a report
descriptor is crafted so that it has a size of 0.
Link: https://patch.msgid.link/20250710-report-size-null-v2-4-ccf922b7c4e5@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
hid_hw_raw_request() is actually useful to ensure the provided buffer
and length are valid. Directly calling in the low level transport driver
function bypassed those checks and allowed invalid paramto be used.
Reported-by: Alan Stern <stern@rowland.harvard.edu>
Closes: https://lore.kernel.org/linux-input/c75433e0-9b47-4072-bbe8-b1d14ea97b13@rowland.harvard.edu/
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250710-report-size-null-v2-3-ccf922b7c4e5@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
The low level transport driver expects the first byte to be the report
ID, even when the report ID is not use (in which case they just shift
the buffer).
However, __hid_request() whas not offsetting the buffer it used by one
in this case, meaning that the raw_request() callback emitted by the
transport driver would be stripped of the first byte.
Note: this changes the API for uhid devices when a request is made
through hid_hw_request. However, several considerations makes me think
this is fine:
- every request to a HID device made through hid_hw_request() would see
that change, but every request made through hid_hw_raw_request()
already has the new behaviour. So that means that the users are
already facing situations where they might have or not the first byte
being the null report ID when it is 0. We are making things more
straightforward in the end.
- uhid is mainly used for BLE devices
- uhid is also used for testing, but I don't see that change a big issue
- for BLE devices, we can check which kernel module is calling
hid_hw_request()
- and in those modules, we can check which are using a Bluetooth device
- and then we can check if the command is used with a report ID or not.
- surprise: none of the kernel module are using a report ID 0
- and finally, bluez, in its function set_report()[0], does the same
shift if the report ID is 0 and the given buffer has a size > 0.
[0] https://git.kernel.org/pub/scm/bluetooth/bluez.git/tree/profiles/input/hog-lib.c#n879
Reported-by: Alan Stern <stern@rowland.harvard.edu>
Closes: https://lore.kernel.org/linux-input/c75433e0-9b47-4072-bbe8-b1d14ea97b13@rowland.harvard.edu/
Reported-by: syzbot+8258d5439c49d4c35f43@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=8258d5439c49d4c35f43
Tested-by: syzbot+8258d5439c49d4c35f43@syzkaller.appspotmail.com
Fixes: 4fa5a7f76cc7 ("HID: core: implement generic .request()")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250710-report-size-null-v2-2-ccf922b7c4e5@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
When the report ID is not used, the low level transport drivers expect
the first byte to be 0. However, currently the allocated buffer not
account for that extra byte, meaning that instead of having 8 guaranteed
bytes for implement to be working, we only have 7.
Reported-by: Alan Stern <stern@rowland.harvard.edu>
Closes: https://lore.kernel.org/linux-input/c75433e0-9b47-4072-bbe8-b1d14ea97b13@rowland.harvard.edu/
Cc: stable@vger.kernel.org
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://patch.msgid.link/20250710-report-size-null-v2-1-ccf922b7c4e5@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
The port 2 host PF can be disabled, this bit reflects that setting.
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Reviewed-by: William Tu <witu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1752064867-16874-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Introduce the `disciplined_fr_counter` capability bit to indicate that
the device’s free-running cycle counter is disciplined to real-time.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1752064867-16874-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
When changing the page size on an mkey, the driver needs to set the
appropriate bits in the mkey mask to indicate which fields are being
modified.
The 6th bit of a page size in mlx5 driver is considered an extension,
and this bit has a dedicated capability and mask bits.
Previously, the driver was not setting this mask in the mkey mask when
performing page size changes, regardless of its hardware support,
potentially leading to an incorrect page size updates.
This fixes the issue by setting the relevant bit in the mkey mask when
performing page size changes on an mkey and the 6th bit of this field is
supported by the hardware.
Fixes: cef7dde8836a ("net/mlx5: Expand mkey page size to support 6 bits")
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/9f43a9c73bf2db6085a99dc836f7137e76579f09.1751979184.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Expose the HCA capability for maximal page size that can be configured
for an mkey. Used for enforcing capabilities when working with highly
contiguous memory and using large page sizes.
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/3e4d3fda37934430f65f72601519e22bf396fd05.1751979184.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Yun Lu says:
====================
fix two issues and optimize code on tpacket_snd()
This series fix two issues and optimize the code on tpacket_snd():
1, fix the SO_SNDTIMEO constraint not effective due to the changes in
commit 581073f626e3;
2, fix a soft lockup issue on a specific edge case, and also optimize
the loop logic to be clearer and more obvious;
---
Changes in v5:
- Still combine fix and optimization together, change to while(1).
Thanks: Willem de Bruijn.
- Link to v4: https://lore.kernel.org/all/20250710102639.280932-1-luyun_611@163.com/
Changes in v4:
- Fix a typo and add the missing semicolon. Thanks: Simon Horman.
- Split the second patch into two, one to fix, another to optimize.
Thanks: Willem de Bruijn
- Link to v3: https://lore.kernel.org/all/20250709095653.62469-1-luyun_611@163.com/
Changes in v3:
- Split in two different patches.
- Simplify the code and reuse ph to continue. Thanks: Eric Dumazet.
- Link to v2: https://lore.kernel.org/all/20250708020642.27838-1-luyun_611@163.com/
Changes in v2:
- Add a Fixes tag.
- Link to v1: https://lore.kernel.org/all/20250707081629.10344-1-luyun_611@163.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When MSG_DONTWAIT is not set, the tpacket_snd operation will wait for
pending_refcnt to decrement to zero before returning. The pending_refcnt
is decremented by 1 when the skb->destructor function is called,
indicating that the skb has been successfully sent and needs to be
destroyed.
If an error occurs during this process, the tpacket_snd() function will
exit and return error, but pending_refcnt may not yet have decremented to
zero. Assuming the next send operation is executed immediately, but there
are no available frames to be sent in tx_ring (i.e., packet_current_frame
returns NULL), and skb is also NULL, the function will not execute
wait_for_completion_interruptible_timeout() to yield the CPU. Instead, it
will enter a do-while loop, waiting for pending_refcnt to be zero. Even
if the previous skb has completed transmission, the skb->destructor
function can only be invoked in the ksoftirqd thread (assuming NAPI
threading is enabled). When both the ksoftirqd thread and the tpacket_snd
operation happen to run on the same CPU, and the CPU trapped in the
do-while loop without yielding, the ksoftirqd thread will not get
scheduled to run. As a result, pending_refcnt will never be reduced to
zero, and the do-while loop cannot exit, eventually leading to a CPU soft
lockup issue.
In fact, skb is true for all but the first iterations of that loop, and
as long as pending_refcnt is not zero, even if incremented by a previous
call, wait_for_completion_interruptible_timeout() should be executed to
yield the CPU, allowing the ksoftirqd thread to be scheduled. Therefore,
the execution condition of this function should be modified to check if
pending_refcnt is not zero, instead of check skb.
- if (need_wait && skb) {
+ if (need_wait && packet_read_pending(&po->tx_ring)) {
As a result, the judgment conditions are duplicated with the end code of
the while loop, and packet_read_pending() is a very expensive function.
Actually, this loop can only exit when ph is NULL, so the loop condition
can be changed to while (1), and in the "ph = NULL" branch, if the
subsequent condition of if is not met, the loop can break directly. Now,
the loop logic remains the same as origin but is clearer and more obvious.
Fixes: 89ed5b519004 ("af_packet: Block execution of tasks waiting for transmit to complete in AF_PACKET")
Cc: stable@kernel.org
Suggested-by: LongJun Tang <tanglongjun@kylinos.cn>
Signed-off-by: Yun Lu <luyun@kylinos.cn>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Due to the changes in commit 581073f626e3 ("af_packet: do not call
packet_read_pending() from tpacket_destruct_skb()"), every time
tpacket_destruct_skb() is executed, the skb_completion is marked as
completed. When wait_for_completion_interruptible_timeout() returns
completed, the pending_refcnt has not yet been reduced to zero.
Therefore, when ph is NULL, the wait function may need to be called
multiple times until packet_read_pending() finally returns zero.
We should call sock_sndtimeo() only once, otherwise the SO_SNDTIMEO
constraint could be way off.
Fixes: 581073f626e3 ("af_packet: do not call packet_read_pending() from tpacket_destruct_skb()")
Cc: stable@kernel.org
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Yun Lu <luyun@kylinos.cn>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A race condition can occur when 'agg' is modified in qfq_change_agg
(called during qfq_enqueue) while other threads access it
concurrently. For example, qfq_dump_class may trigger a NULL
dereference, and qfq_delete_class may cause a use-after-free.
This patch addresses the issue by:
1. Moved qfq_destroy_class into the critical section.
2. Added sch_tree_lock protection to qfq_dump_class and
qfq_dump_class_stats.
Fixes: 462dbc9101ac ("pkt_sched: QFQ Plus: fair-queueing service at DRR cost")
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"19 hotfixes. A whopping 16 are cc:stable and the remainder address
post-6.15 issues or aren't considered necessary for -stable kernels.
14 are for MM. Three gdb-script fixes and a kallsyms build fix"
* tag 'mm-hotfixes-stable-2025-07-11-16-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
Revert "sched/numa: add statistics of numa balance task"
mm: fix the inaccurate memory statistics issue for users
mm/damon: fix divide by zero in damon_get_intervals_score()
samples/damon: fix damon sample mtier for start failure
samples/damon: fix damon sample wsse for start failure
samples/damon: fix damon sample prcl for start failure
kasan: remove kasan_find_vm_area() to prevent possible deadlock
scripts: gdb: vfs: support external dentry names
mm/migrate: fix do_pages_stat in compat mode
mm/damon/core: handle damon_call_control as normal under kdmond deactivation
mm/rmap: fix potential out-of-bounds page table access during batched unmap
mm/hugetlb: don't crash when allocating a folio if there are no resv
scripts/gdb: de-reference per-CPU MCE interrupts
scripts/gdb: fix interrupts.py after maple tree conversion
maple_tree: fix mt_destroy_walk() on root leaf node
mm/vmalloc: leave lazy MMU mode on PTE mapping error
scripts/gdb: fix interrupts display after MCP on x86
lib/alloc_tag: do not acquire non-existent lock in alloc_tag_top_users()
kallsyms: fix build without execinfo
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
"Fix for a cache aliasing issue by adding missing flush_dcache_folio(),
which causes execution failures on some arm32 setups.
Fix for large compressed fragments, which could be generated by
-Eall-fragments option (but should be rare) and was rejected by
mistake due to an on-disk hardening commit.
The remaining ones are small fixes. Summary:
- Address cache aliasing for mappable page cache folios
- Allow readdir() to be interrupted
- Fix large fragment handling which was errored out by mistake
- Add missing tracepoints
- Use memcpy_to_folio() to replace copy_to_iter() for inline data"
* tag 'erofs-for-6.16-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: fix large fragment handling
erofs: allow readdir() to be interrupted
erofs: address D-cache aliasing
erofs: use memcpy_to_folio() to replace copy_to_iter()
erofs: fix to add missing tracepoint in erofs_read_folio()
erofs: fix to add missing tracepoint in erofs_readahead()
|
|
Pull bcachefs fixes from Kent Overstreet.
* tag 'bcachefs-2025-07-11' of git://evilpiepirate.org/bcachefs:
bcachefs: Don't set BCH_FS_error on transaction restart
bcachefs: Fix additional misalignment in journal space calculations
bcachefs: Don't schedule non persistent passes persistently
bcachefs: Fix bch2_btree_transactions_read() synchronization
bcachefs: btree read retry fixes
bcachefs: btree node scan no longer uses btree cache
bcachefs: Tweak btree cache helpers for use by btree node scan
bcachefs: Fix btree for nonexistent tree depth
bcachefs: Fix bch2_io_failures_to_text()
bcachefs: bch2_fpunch_snapshot()
|
|
Pull smb server fixes from Steve French:
- fix use after free in lease break
- small fix for freeing rdma transport (fixes missing logging of
cm_qp_destroy)
- fix write count leak
* tag 'v6.16-rc5-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix potential use-after-free in oplock/lease break ack
ksmbd: fix a mount write count leak in ksmbd_vfs_kern_path_locked()
smb: server: make use of rdma_destroy_qp()
|
|
The kobject for the queue, `disk->queue_kobj`, is initialized with a
reference count of 1 via `kobject_init()` in `blk_register_queue()`.
While `kobject_del()` is called during the unregister path to remove
the kobject from sysfs, the initial reference is never released.
Add a call to `kobject_put()` in `blk_unregister_queue()` to properly
decrement the reference count and fix the leak.
Fixes: 2bd85221a625 ("block: untangle request_queue refcounting from sysfs")
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250711083009.2574432-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
This cleanup patchset includes the following patches:
- bump version strings, by Simon Wunderlich
- batman-adv: store hard_iface as iflink private data,
by Matthias Schiffer
* tag 'batadv-next-pullrequest-20250710' of git://git.open-mesh.org/linux-merge:
batman-adv: store hard_iface as iflink private data
batman-adv: Start new development cycle
====================
Link: https://patch.msgid.link/20250710164501.153872-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
ice: cleanups and preparation for live migration
Jake Keller says:
Various cleanups and preparation to the ice driver code for supporting
SR-IOV live migration.
The logic for unpacking Rx queue context data is added. This is the inverse
of the existing packing logic. Thanks to <linux/packing.h> this is trivial
to add.
Code to enable both reading and writing the Tx queue context for a queue
over a shared hardware register interface is added. Thanks to ice_adapter,
this is locked across all PFs that need to use it, preventing concurrency
issues with multiple PFs.
The RSS hash configuration requested by a VF is cached within the VF
structure. This will be used to track and restore the same configuration
during migration load.
ice_sriov_set_msix_vec_count() is updated to use pci_iov_vf_id() instead of
open-coding a worse equivalent, and checks to avoid rebuilding MSI-X if the
current request is for the existing amount of vectors.
A new ice_get_vf_by_dev() helper function is added to simplify accessing a
VF from its PCI device structure. This will be used more heavily within the
live migration code itself.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: introduce ice_get_vf_by_dev() wrapper
ice: avoid rebuilding if MSI-X vector count is unchanged
ice: use pci_iov_vf_id() to get VF ID
ice: expose VF functions used by live migration
ice: move ice_vsi_update_l2tsel to ice_lib.c
ice: save RSS hash configuration for migration
ice: add functions to get and set Tx queue context
ice: add support for reading and unpacking Rx queue context
====================
Link: https://patch.msgid.link/20250710214518.1824208-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fixes from Bjorn Helgaas:
- Track apple Root Ports explicitly and look up the driver data from
the struct device instead of using dev->driver_data, which is used by
pci_host_common_init() for the generic host bridge pointer (Marc
Zyngier)
- Set dev->driver_data before pci_host_common_init() calls
gen_pci_init() because some drivers need it to set up ECAM mappings;
this fixes a regression on MicroChip MPFS Icicle (Geert Uytterhoeven)
- Revert the now-unnecessary use of ECAM pci_config_window.priv to
store a copy of dev->driver_data (Marc Zyngier)
* tag 'pci-v6.16-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
Revert "PCI: ecam: Allow cfg->priv to be pre-populated from the root port device"
PCI: host-generic: Set driver_data before calling gen_pci_init()
PCI: apple: Add tracking of probed root ports
|
|
Pull drm fixes from Simona Vetter:
"Cross-subsystem Changes:
- agp/amd64 binding dmesg noise regression fix
Core Changes:
- fix race in gem_handle_create_tail
- fixup handle_count fb refcount regression from -rc5, popular with
reports ...
- call rust dtor for drm_device release
Driver Changes:
- nouveau: magic 50ms suspend fix, acpi leak fix
- tegra: dma api error in nvdec
- pvr: fix device reset
- habanalbs maintainer update
- intel display: fix some dsi mipi sequences
- xe fixes: SRIOV fixes, small GuC fixes, disable indirect ring due
to issues, compression fix for fragmented BO, doc update
* tag 'drm-fixes-2025-07-12' of https://gitlab.freedesktop.org/drm/kernel: (22 commits)
drm/xe/guc: Default log level to non-verbose
drm/xe/bmg: Don't use WA 16023588340 and 22019338487 on VF
drm/xe/guc: Recommend GuC v70.46.2 for BMG, LNL, DG2
drm/xe/pm: Correct comment of xe_pm_set_vram_threshold()
drm/xe: Release runtime pm for error path of xe_devcoredump_read()
drm/xe/pm: Restore display pm if there is error after display suspend
drm/i915/bios: Apply vlv_fixup_mipi_sequences() to v2 mipi-sequences too
drm/gem: Fix race in drm_gem_handle_create_tail()
drm/framebuffer: Acquire internal references on GEM handles
agp/amd64: Check AGP Capability before binding to unsupported devices
drm/xe/bmg: fix compressed VRAM handling
Revert "drm/xe/xe2: Enable Indirect Ring State support for Xe2"
drm/xe: Allocate PF queue size on pow2 boundary
drm/xe/pf: Clear all LMTT pages on alloc
drm/nouveau/gsp: fix potential leak of memory used during acpi init
rust: drm: remove unnecessary imports
MAINTAINERS: Change habanalabs maintainer
drm/imagination: Fix kernel crash when hard resetting the GPU
drm/tegra: nvdec: Fix dma_alloc_coherent error check
rust: drm: device: drop_in_place() the drm::Device in release()
...
|
