| Age | Commit message (Collapse) | Author |
|---|
|
With EIOINTC interrupt controller, physical CPU ID is set for irq route.
However the function kvm_get_vcpu() is used to get destination vCPU when
delivering irq. With API kvm_get_vcpu(), the logical CPU ID is used.
With API kvm_get_vcpu_by_cpuid(), vCPU ID can be searched from physical
CPU ID.
Cc: stable@vger.kernel.org
Fixes: 3956a52bc05b ("LoongArch: KVM: Add EIOINTC read and write functions")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
With function eiointc_update_sw_coremap(), there is forced assignment
like val = *(u64 *)pvalue. Parameter pvalue may be pointer to char type
or others, there is problem with forced assignment with u64 type.
Here the detailed value is passed rather address pointer.
Cc: stable@vger.kernel.org
Fixes: 3956a52bc05b ("LoongArch: KVM: Add EIOINTC read and write functions")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
IOCSR instruction supports 1/2/4/8 bytes access, the address should be
naturally aligned with its access size. Here address alignment check is
added in the EIOINTC kernel emulation.
Cc: stable@vger.kernel.org
Fixes: 3956a52bc05b ("LoongArch: KVM: Add EIOINTC read and write functions")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
i2c-host fixes for v6.16-rc4
- imx: fix SMBus protocol compliance during block read
- omap: fix error handling path in probe
- robotfuzz, tiny-usb: prevent zero-length reads
- x86, designware, amdisp: fix build error when modules are
disabled
|
|
The empty panel_dpi struct was only ever used as a discriminant, but
it's kind of a hack, and with the reworks done in the previous patches,
we shouldn't need it anymore.
Let's get rid of it.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Toradex Colibri iMX6
Link: https://lore.kernel.org/r/20250626-drm-panel-simple-fixes-v2-5-5afcaa608bdc@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Commit de04bb0089a9 ("drm/panel/panel-simple: Use the new allocation in
place of devm_kzalloc()") moved the call to drm_panel_init into the
devm_drm_panel_alloc(), which needs a connector type to initialize
properly.
In the panel-dpi compatible case, the passed panel_desc structure is an
empty one used as a discriminant, and the connector type it contains
isn't actually initialized.
It is initialized through a call to panel_dpi_probe() later in the
function, which used to be before the call to drm_panel_init() that got
merged into devm_drm_panel_alloc().
So, we do need a proper panel_desc pointer before the call to
devm_drm_panel_alloc() now. All cases associate their panel_desc with
the panel compatible and use of_device_get_match_data, except for the
panel-dpi compatible.
In that case, we're expected to call panel_dpi_probe, which will
allocate and initialize the panel_desc for us.
Let's create such a helper function that would be called first in the
driver and will lookup the desc by compatible, or allocate one if
relevant.
Reported-by: Francesco Dolcini <francesco@dolcini.it>
Closes: https://lore.kernel.org/all/20250612081834.GA248237@francesco-nb/
Fixes: de04bb0089a9 ("drm/panel/panel-simple: Use the new allocation in place of devm_kzalloc()")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Toradex Colibri iMX6
Link: https://lore.kernel.org/r/20250626-drm-panel-simple-fixes-v2-4-5afcaa608bdc@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
In order to fix the regession introduced by commit de04bb0089a9
("drm/panel/panel-simple: Use the new allocation in place of
devm_kzalloc()"), we need to move the panel_desc lookup into the common
panel_simple_probe() function.
There's two callers for that function, the probe implementations of the
platform and MIPI-DSI drivers panel-simple implements.
The MIPI-DSI driver's probe will need to access the current panel_desc
to initialize properly, which won't be possible anymore if we make that
lookup in panel_simple_probe().
However, we can make panel_simple_probe() return the initialized
panel_simple structure it allocated, which will contain a pointer to the
associated panel_desc in its desc field.
This doesn't fix de04bb0089a9 ("drm/panel/panel-simple: Use the new
allocation in place of devm_kzalloc()") still, but makes progress
towards that goal.
Fixes: de04bb0089a9 ("drm/panel/panel-simple: Use the new allocation in place of devm_kzalloc()")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Toradex Colibri iMX6
Link: https://lore.kernel.org/r/20250626-drm-panel-simple-fixes-v2-3-5afcaa608bdc@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
If the panel-simple driver is probed from a panel-dpi compatible, the
driver will use an empty panel_desc structure as a descriminant. It
will then allocate and fill another panel_desc as part of its probe.
However, that allocation needs to happen after the panel_simple
structure has been allocated, since panel_dpi_probe(), the function
doing the panel_desc allocation and initialization, takes a panel_simple
pointer as an argument.
This pointer is used to fill the panel_simple->desc pointer that is
still initialized with the empty panel_desc when panel_dpi_probe() is
called.
Since commit de04bb0089a9 ("drm/panel/panel-simple: Use the new
allocation in place of devm_kzalloc()"), we will need the panel
connector type found in panel_desc to allocate panel_simple. This
creates a circular dependency where we need panel_desc to create
panel_simple, and need panel_simple to create panel_desc.
Let's break that dependency by making panel_dpi_probe simply return the
panel_desc it initialized and move the panel_simple->desc assignment to
the caller.
This will not fix the breaking commit entirely, but will move us towards
the right direction.
Fixes: de04bb0089a9 ("drm/panel/panel-simple: Use the new allocation in place of devm_kzalloc()")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Toradex Colibri iMX6
Link: https://lore.kernel.org/r/20250626-drm-panel-simple-fixes-v2-2-5afcaa608bdc@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
This will be especially useful for generic panels (like panel-simple)
which can take different code path depending on if they are MIPI-DSI
devices or platform devices.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Toradex Colibri iMX6
Link: https://lore.kernel.org/r/20250626-drm-panel-simple-fixes-v2-1-5afcaa608bdc@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
When two masters share an IOMMU, calling ops->of_xlate during
the second master's driver init may overwrite iommu->domain set
by the first. This causes the check if (iommu->domain == domain)
in rk_iommu_attach_device() to fail, resulting in the same
iommu->node being added twice to &rk_domain->iommus, which can
lead to an infinite loop in subsequent &rk_domain->iommus operations.
Cc: <stable@vger.kernel.org>
Fixes: 25c2325575cc ("iommu/rockchip: Add missing set_platform_dma_ops callback")
Signed-off-by: Simon Xue <xxm@rock-chips.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20250623020018.584802-1-xxm@rock-chips.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"This fixes a regression where wp512 can no longer be used with hmac"
* tag 'v6.16-p6' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: wp512 - Use API partial block handling
|
|
Pull bcachefs fixes from Kent Overstreet:
- Lots of small check/repair fixes, primarily in subvol loop and
directory structure loop (when involving snapshots).
- Fix a few 6.16 regressions: rare UAF in the foreground allocator path
when taking a transaction restart from the transaction bump
allocator, and some small fallout from the change to log the error
being corrected in the journal when repairing errors, also some
fallout from the btree node read error logging improvements.
(Alan, Bharadwaj)
- New option: journal_rewind
This lets the entire filesystem be reset to an earlier point in time.
Note that this is only a disaster recovery tool, and right now there
are major caveats to using it (discards should be disabled, in
particular), but it successfully restored the filesystem of one of
the users who was bit by the subvolume deletion bug and didn't have
backups. I'll likely be making some changes to the discard path in
the future to make this a reliable recovery tool.
- Some new btree iterator tracepoints, for tracking down some
livelock-ish behaviour we've been seeing in the main data write path.
* tag 'bcachefs-2025-06-26' of git://evilpiepirate.org/bcachefs: (51 commits)
bcachefs: Plumb correct ip to trans_relock_fail tracepoint
bcachefs: Ensure we rewind to run recovery passes
bcachefs: Ensure btree node scan runs before checking for scanned nodes
bcachefs: btree_root_unreadable_and_scan_found_nothing should not be autofix
bcachefs: fix bch2_journal_keys_peek_prev_min() underflow
bcachefs: Use wait_on_allocator() when allocating journal
bcachefs: Check for bad write buffer key when moving from journal
bcachefs: Don't unlock the trans if ret doesn't match BCH_ERR_operation_blocked
bcachefs: Fix range in bch2_lookup_indirect_extent() error path
bcachefs: fix spurious error_throw
bcachefs: Add missing bch2_err_class() to fileattr_set()
bcachefs: Add missing key type checks to check_snapshot_exists()
bcachefs: Don't log fsck err in the journal if doing repair elsewhere
bcachefs: Fix *__bch2_trans_subbuf_alloc() error path
bcachefs: Fix missing newlines before ero
bcachefs: fix spurious error in read_btree_roots()
bcachefs: fsck: Fix oops in key_visible_in_snapshot()
bcachefs: fsck: fix unhandled restart in topology repair
bcachefs: fsck: Fix check_directory_structure when no check_dirents
bcachefs: Fix restart handling in btree_node_scrub_work()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- fix for stalls during suspend/resume cycles with hid-nintendo (Daniel
J. Ogorchock)
- memory leak and reference count fixes in hid-wacom and in-appletb-kdb
(Qasim Ijaz)
- race condition (leading to kernel crash) fix during device removal in
hid-wacom (Thomas Zeitlhofer)
- fix for missed interrupt in intel-thc-hid (Intel-thc-hid:)
- support for a bunch of new device IDs
* tag 'hid-for-linus-2025062701' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: lenovo: Add support for ThinkPad X1 Tablet Thin Keyboard Gen2
HID: appletb-kbd: fix "appletb_backlight" backlight device reference counting
HID: wacom: fix crash in wacom_aes_battery_handler()
HID: intel-ish-hid: ipc: Add Wildcat Lake PCI device ID
hid: intel-ish-hid: Use PCI_DEVICE_DATA() macro for ISH device table
HID: lenovo: Restrict F7/9/11 mode to compact keyboards only
HID: Add IGNORE quirk for SMARTLINKTECHNOLOGY
HID: input: lower message severity of 'No inputs registered, leaving' to debug
HID: quirks: Add quirk for 2 Chicony Electronics HP 5MP Cameras
HID: Intel-thc-hid: Intel-quicki2c: Enhance QuickI2C reset flow
HID: nintendo: avoid bluetooth suspend/resume stalls
HID: wacom: fix kobject reference count leak
HID: wacom: fix memory leak on sysfs attribute creation failure
HID: wacom: fix memory leak on kobject creation failure
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
UAPI Changes:
Driver Changes:
- Missing error check (Haoxiang Li)
- Fix xe_hwmon_power_max_write (Karthik)
- Move flushes (Maarten and Matthew Auld)
- Explicitly exit CT safe mode on unwind (Michal)
- Process deferred GGTT node removals on device unwind (Michal)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/aF1T6EzzC3xj4K4H@fedora
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- Fix for SNPS PHY HDMI for 1080p@120Hz
- Correct DP AUX DPCD probe address
- Followup build fix for GCOV and AutoFDO enabled config
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://lore.kernel.org/r/aFzsHR9WLYsxg8jy@jlahtine-mobl
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.16-2025-25-25:
amdgpu:
- Cleaner shader support for additional GFX9 GPUs
- MES firmware compatibility fixes
- Discovery error reporting fixes
- SDMA6/7 userq fixes
- Backlight fix
- EDID sanity check
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250625151734.11537-1-alexander.deucher@amd.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Convert altr,uart-1.0 and altr,juart-1.0 to DT schema. These were
applied for nios2, but never sent upstream.
- Fix extra '/' in fsl,ls1028a-reset '$id' path
- Fix warnings in ti,sn65dsi83 schema due to unnecessary $ref.
* tag 'devicetree-fixes-for-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: serial: Convert altr,uart-1.0 to DT schema
dt-bindings: serial: Convert altr,juart-1.0 to DT schema
dt-bindings: soc: fsl,ls1028a-reset: Drop extra "/" in $id
dt-bindings: drm/bridge: ti-sn65dsi83: drop $ref to fix lvds-vod* warnings
|
|
A previous commit aborted mapping more for a non-incremental ring for
bundle peeking, but depending on where in the process this peeking
happened, it would not necessarily prevent a retry by the user. That can
create gaps in the received/read data.
Add struct buf_sel_arg->partial_map, which can pass this information
back. The networking side can then map that to internal state and use it
to gate retry as well.
Since this necessitates a new flag, change io_sr_msg->retry to a
retry_flags member, and store both the retry and partial map condition
in there.
Cc: stable@vger.kernel.org
Fixes: 26ec15e4b0c1 ("io_uring/kbuf: don't truncate end buffer for multiple buffer peeks")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Allow the flexfiles error handling to recognise NFS level errors (as
opposed to RPC level errors) and handle them separately. The main
motivator is the NFSERR_PERM errors that get returned if the NFS client
connects to the data server through a port number that is lower than
1024. In that case, the client should disconnect and retry a READ on a
different data server, or it should retry a WRITE after reconnecting.
Reviewed-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Fixes: d67ae825a59d ("pnfs/flexfiles: Add the FlexFile Layout Driver")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth and wireless.
Current release - regressions:
- bridge: fix use-after-free during router port configuration
Current release - new code bugs:
- eth: wangxun: fix the creation of page_pool
Previous releases - regressions:
- netpoll: initialize UDP checksum field before checksumming
- wifi: mac80211: finish link init before RCU publish
- bluetooth: fix use-after-free in vhci_flush()
- eth:
- ionic: fix DMA mapping test
- bnxt: properly flush XDP redirect lists
Previous releases - always broken:
- netlink: specs: enforce strict naming of properties
- unix: don't leave consecutive consumed OOB skbs.
- vsock: fix linux/vm_sockets.h userspace compilation errors
- selftests: fix TCP packet checksum"
* tag 'net-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (38 commits)
net: libwx: fix the creation of page_pool
net: selftests: fix TCP packet checksum
atm: Release atm_dev_mutex after removing procfs in atm_dev_deregister().
netlink: specs: enforce strict naming of properties
netlink: specs: tc: replace underscores with dashes in names
netlink: specs: rt-link: replace underscores with dashes in names
netlink: specs: mptcp: replace underscores with dashes in names
netlink: specs: ovs_flow: replace underscores with dashes in names
netlink: specs: devlink: replace underscores with dashes in names
netlink: specs: dpll: replace underscores with dashes in names
netlink: specs: ethtool: replace underscores with dashes in names
netlink: specs: fou: replace underscores with dashes in names
netlink: specs: nfsd: replace underscores with dashes in names
net: enetc: Correct endianness handling in _enetc_rd_reg64
atm: idt77252: Add missing `dma_map_error()`
bnxt: properly flush XDP redirect lists
vsock/uapi: fix linux/vm_sockets.h userspace compilation errors
wifi: mac80211: finish link init before RCU publish
wifi: iwlwifi: mvm: assume '1' as the default mac_config_cmd version
selftest: af_unix: Add tests for -ECONNRESET.
...
|
|
When performing a file read from RDMA, smbd_recv() prints an "Invalid msg
type 4" error and fails the I/O. This is due to the switch-statement there
not handling the ITER_FOLIOQ handed down from netfslib.
Fix this by collapsing smbd_recv_buf() and smbd_recv_page() into
smbd_recv() and just using copy_to_iter() instead of memcpy(). This
future-proofs the function too, in case more ITER_* types are added.
Fixes: ee4cdf7ba857 ("netfs: Speed up buffered reading")
Reported-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Tom Talpey <tom@talpey.com>
cc: Paulo Alcantara (Red Hat) <pc@manguebit.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The handling of received data in the smbdirect client code involves using
copy_to_iter() to copy data from the smbd_reponse struct's packet trailer
to a folioq buffer provided by netfslib that encapsulates a chunk of
pagecache.
If, however, CONFIG_HARDENED_USERCOPY=y, this will result in the checks
then performed in copy_to_iter() oopsing with something like the following:
CIFS: Attempting to mount //172.31.9.1/test
CIFS: VFS: RDMA transport established
usercopy: Kernel memory exposure attempt detected from SLUB object 'smbd_response_0000000091e24ea1' (offset 81, size 63)!
------------[ cut here ]------------
kernel BUG at mm/usercopy.c:102!
...
RIP: 0010:usercopy_abort+0x6c/0x80
...
Call Trace:
<TASK>
__check_heap_object+0xe3/0x120
__check_object_size+0x4dc/0x6d0
smbd_recv+0x77f/0xfe0 [cifs]
cifs_readv_from_socket+0x276/0x8f0 [cifs]
cifs_read_from_socket+0xcd/0x120 [cifs]
cifs_demultiplex_thread+0x7e9/0x2d50 [cifs]
kthread+0x396/0x830
ret_from_fork+0x2b8/0x3b0
ret_from_fork_asm+0x1a/0x30
The problem is that the smbd_response slab's packet field isn't marked as
being permitted for usercopy.
Fix this by passing parameters to kmem_slab_create() to indicate that
copy_to_iter() is permitted from the packet region of the smbd_response
slab objects, less the header space.
Fixes: ee4cdf7ba857 ("netfs: Speed up buffered reading")
Reported-by: Stefan Metzmacher <metze@samba.org>
Link: https://lore.kernel.org/r/acb7f612-df26-4e2a-a35d-7cd040f513e1@samba.org/
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Tested-by: Stefan Metzmacher <metze@samba.org>
cc: Paulo Alcantara <pc@manguebit.com>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Fix cifs_signal_cifsd_for_reconnect() to take the correct lock order
and prevent the following deadlock from happening
======================================================
WARNING: possible circular locking dependency detected
6.16.0-rc3-build2+ #1301 Tainted: G S W
------------------------------------------------------
cifsd/6055 is trying to acquire lock:
ffff88810ad56038 (&tcp_ses->srv_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0x134/0x200
but task is already holding lock:
ffff888119c64330 (&ret_buf->chan_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0xcf/0x200
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (&ret_buf->chan_lock){+.+.}-{3:3}:
validate_chain+0x1cf/0x270
__lock_acquire+0x60e/0x780
lock_acquire.part.0+0xb4/0x1f0
_raw_spin_lock+0x2f/0x40
cifs_setup_session+0x81/0x4b0
cifs_get_smb_ses+0x771/0x900
cifs_mount_get_session+0x7e/0x170
cifs_mount+0x92/0x2d0
cifs_smb3_do_mount+0x161/0x460
smb3_get_tree+0x55/0x90
vfs_get_tree+0x46/0x180
do_new_mount+0x1b0/0x2e0
path_mount+0x6ee/0x740
do_mount+0x98/0xe0
__do_sys_mount+0x148/0x180
do_syscall_64+0xa4/0x260
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #1 (&ret_buf->ses_lock){+.+.}-{3:3}:
validate_chain+0x1cf/0x270
__lock_acquire+0x60e/0x780
lock_acquire.part.0+0xb4/0x1f0
_raw_spin_lock+0x2f/0x40
cifs_match_super+0x101/0x320
sget+0xab/0x270
cifs_smb3_do_mount+0x1e0/0x460
smb3_get_tree+0x55/0x90
vfs_get_tree+0x46/0x180
do_new_mount+0x1b0/0x2e0
path_mount+0x6ee/0x740
do_mount+0x98/0xe0
__do_sys_mount+0x148/0x180
do_syscall_64+0xa4/0x260
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #0 (&tcp_ses->srv_lock){+.+.}-{3:3}:
check_noncircular+0x95/0xc0
check_prev_add+0x115/0x2f0
validate_chain+0x1cf/0x270
__lock_acquire+0x60e/0x780
lock_acquire.part.0+0xb4/0x1f0
_raw_spin_lock+0x2f/0x40
cifs_signal_cifsd_for_reconnect+0x134/0x200
__cifs_reconnect+0x8f/0x500
cifs_handle_standard+0x112/0x280
cifs_demultiplex_thread+0x64d/0xbc0
kthread+0x2f7/0x310
ret_from_fork+0x2a/0x230
ret_from_fork_asm+0x1a/0x30
other info that might help us debug this:
Chain exists of:
&tcp_ses->srv_lock --> &ret_buf->ses_lock --> &ret_buf->chan_lock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&ret_buf->chan_lock);
lock(&ret_buf->ses_lock);
lock(&ret_buf->chan_lock);
lock(&tcp_ses->srv_lock);
*** DEADLOCK ***
3 locks held by cifsd/6055:
#0: ffffffff857de398 (&cifs_tcp_ses_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0x7b/0x200
#1: ffff888119c64060 (&ret_buf->ses_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0x9c/0x200
#2: ffff888119c64330 (&ret_buf->chan_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0xcf/0x200
Cc: linux-cifs@vger.kernel.org
Reported-by: David Howells <dhowells@redhat.com>
Fixes: d7d7a66aacd6 ("cifs: avoid use of global locks for high contention data")
Reviewed-by: David Howells <dhowells@redhat.com>
Tested-by: David Howells <dhowells@redhat.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Delayed work to prevent USB3 hubs from runtime-suspending immediately
after resume was added in commit 8f5b7e2bec1c ("usb: hub: fix detection
of high tier USB3 devices behind suspended hubs").
This delayed work needs be flushed if system suspends, or hub needs to
be quiesced for other reasons right after resume. Not flushing it
triggered issues on QC SC8280XP CRD board during suspend/resume testing.
Fix it by flushing the delayed resume work in hub_quiesce()
The delayed work item that allow hub runtime suspend is also scheduled
just before calling autopm get. Alan pointed out there is a small risk
that work is run before autopm get, which would call autopm put before
get, and mess up the runtime pm usage order.
Swap the order of work sheduling and calling autopm get to solve this.
Cc: stable <stable@kernel.org>
Fixes: 8f5b7e2bec1c ("usb: hub: fix detection of high tier USB3 devices behind suspended hubs")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Closes: https://lore.kernel.org/linux-usb/acaaa928-832c-48ca-b0ea-d202d5cd3d6c@oss.qualcomm.com
Reported-by: Alan Stern <stern@rowland.harvard.edu>
Closes: https://lore.kernel.org/linux-usb/c73fbead-66d7-497a-8fa1-75ea4761090a@rowland.harvard.edu
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250626130102.3639861-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
While bdev_count_inflight is interating all cpus, if some IOs are issued
from traversed cpu and then completed from the cpu that is not traversed
yet:
cpu0
cpu1
bdev_count_inflight
//for_each_possible_cpu
// cpu0 is 0
infliht += 0
// issue a io
blk_account_io_start
// cpu0 inflight ++
cpu2
// the io is done
blk_account_io_done
// cpu2 inflight --
// cpu 1 is 0
inflight += 0
// cpu2 is -1
inflight += -1
...
In this case, the total inflight will be -1, causing lots of false
warning. Fix the problem by removing the warning.
Noted there is still a valid warning for nvme-mpath(From Yi) that is not
fixed yet.
Fixes: f5482ee5edb9 ("block: WARN if bdev inflight counter is negative")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Closes: https://lore.kernel.org/linux-block/aFtUXy-lct0WxY2w@mozart.vkv.me/T/#mae89155a5006463d0a21a4a2c35ae0034b26a339
Reported-and-tested-by: Calvin Owens <calvin@wbinvd.org>
Closes: https://lore.kernel.org/linux-block/aFtUXy-lct0WxY2w@mozart.vkv.me/T/#m1d935a00070bf95055d0ac84e6075158b08acaef
Reported-by: Dave Chinner <david@fromorbit.com>
Closes: https://lore.kernel.org/linux-block/aFuypjqCXo9-5_En@dread.disaster.area/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250626115743.1641443-1-yukuai3@huawei.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull NVMe fixes from Christoph:
" - reset delayed remove_work after reconnect (Keith Busch)
- fix atomic write size validation (Christoph Hellwig)"
* tag 'nvme-6.16-2025-06-26' of git://git.infradead.org/nvme:
nvme: fix atomic write size validation
nvme: refactor the atomic write unit detection
nvme: reset delayed remove_work after reconnect
|
|
Add additional checks that queue depth and number of queues are
non-zero.
Signed-off-by: Ronnie Sahlberg <rsahlberg@whamcloud.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250626022046.235018-1-ronniesahlberg@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
While we are indirectly draining our dedicated workqueue ggtt->wq
that we use to complete asynchronous removal of some GGTT nodes,
this happends as part of the managed-drm unwinding (ggtt_fini_early),
which could be later then manage-device unwinding, where we could
already unmap our MMIO/GMS mapping (mmio_fini).
This was recently observed during unsuccessful VF initialization:
[ ] xe 0000:00:02.1: probe with driver xe failed with error -62
[ ] xe 0000:00:02.1: DEVRES REL ffff88811e747340 __xe_bo_unpin_map_no_vm (16 bytes)
[ ] xe 0000:00:02.1: DEVRES REL ffff88811e747540 __xe_bo_unpin_map_no_vm (16 bytes)
[ ] xe 0000:00:02.1: DEVRES REL ffff88811e747240 __xe_bo_unpin_map_no_vm (16 bytes)
[ ] xe 0000:00:02.1: DEVRES REL ffff88811e747040 tiles_fini (16 bytes)
[ ] xe 0000:00:02.1: DEVRES REL ffff88811e746840 mmio_fini (16 bytes)
[ ] xe 0000:00:02.1: DEVRES REL ffff88811e747f40 xe_bo_pinned_fini (16 bytes)
[ ] xe 0000:00:02.1: DEVRES REL ffff88811e746b40 devm_drm_dev_init_release (16 bytes)
[ ] xe 0000:00:02.1: [drm:drm_managed_release] drmres release begin
[ ] xe 0000:00:02.1: [drm:drm_managed_release] REL ffff88810ef81640 __fini_relay (8 bytes)
[ ] xe 0000:00:02.1: [drm:drm_managed_release] REL ffff88810ef80d40 guc_ct_fini (8 bytes)
[ ] xe 0000:00:02.1: [drm:drm_managed_release] REL ffff88810ef80040 __drmm_mutex_release (8 bytes)
[ ] xe 0000:00:02.1: [drm:drm_managed_release] REL ffff88810ef80140 ggtt_fini_early (8 bytes)
and this was leading to:
[ ] BUG: unable to handle page fault for address: ffffc900058162a0
[ ] #PF: supervisor write access in kernel mode
[ ] #PF: error_code(0x0002) - not-present page
[ ] Oops: Oops: 0002 [#1] SMP NOPTI
[ ] Tainted: [W]=WARN
[ ] Workqueue: xe-ggtt-wq ggtt_node_remove_work_func [xe]
[ ] RIP: 0010:xe_ggtt_set_pte+0x6d/0x350 [xe]
[ ] Call Trace:
[ ] <TASK>
[ ] xe_ggtt_clear+0xb0/0x270 [xe]
[ ] ggtt_node_remove+0xbb/0x120 [xe]
[ ] ggtt_node_remove_work_func+0x30/0x50 [xe]
[ ] process_one_work+0x22b/0x6f0
[ ] worker_thread+0x1e8/0x3d
Add managed-device action that will explicitly drain the workqueue
with all pending node removals prior to releasing MMIO/GSM mapping.
Fixes: 919bb54e989c ("drm/xe: Fix missing runtime outer protection for ggtt_remove_node")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250612220937.857-2-michal.wajdeczko@intel.com
(cherry picked from commit 89d2835c3680ab1938e22ad81b1c9f8c686bd391)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
During driver probe we might be briefly using CT safe mode, which
is based on a delayed work, but usually we are able to stop this
once we have IRQ fully operational. However, if we abort the probe
quite early then during unwind we might try to destroy the workqueue
while there is still a pending delayed work that attempts to restart
itself which triggers a WARN.
This was recently observed during unsuccessful VF initialization:
[ ] xe 0000:00:02.1: probe with driver xe failed with error -62
[ ] ------------[ cut here ]------------
[ ] workqueue: cannot queue safe_mode_worker_func [xe] on wq xe-g2h-wq
[ ] WARNING: CPU: 9 PID: 0 at kernel/workqueue.c:2257 __queue_work+0x287/0x710
[ ] RIP: 0010:__queue_work+0x287/0x710
[ ] Call Trace:
[ ] delayed_work_timer_fn+0x19/0x30
[ ] call_timer_fn+0xa1/0x2a0
Exit the CT safe mode on unwind to avoid that warning.
Fixes: 09b286950f29 ("drm/xe/guc: Allow CTB G2H processing without G2H IRQ")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250612220937.857-3-michal.wajdeczko@intel.com
(cherry picked from commit 2ddbb73ec20b98e70a5200cb85deade22ccea2ec)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Only need the flush for DPT host updates here. Normal GGTT updates don't
need special flush.
Fixes: 01570b446939 ("drm/xe/bmg: implement Wa_16023588340")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: stable@vger.kernel.org # v6.12+
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250606104546.1996818-4-matthew.auld@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 35db1da40c8cfd7511dc42f342a133601eb45449)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Flushing l2 is only needed after all data has been written.
Fixes: 01570b446939 ("drm/xe/bmg: implement Wa_16023588340")
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: stable@vger.kernel.org # v6.12+
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250606104546.1996818-3-matthew.auld@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 0dd2dd0182bc444a62652e89d08c7f0e4fde15ba)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
The variable index is modified and reused as array index when modify
register EIOINTC_ENABLE. There will be array index overflow problem.
Cc: stable@vger.kernel.org
Fixes: 3956a52bc05b ("LoongArch: KVM: Add EIOINTC read and write functions")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
When the KCOV is enabled all functions get instrumented, unless
the __no_sanitize_coverage attribute is used. To prepare for
__no_sanitize_coverage being applied to __init functions, we have to
handle differences in how GCC's inline optimizations get resolved.
For LoongArch this exposed several places where __init annotations
were missing but ended up being "accidentally correct". So fix these
cases.
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The EFI memory map at 'boot_memmap' is crucial for kdump to understand
the primary kernel's memory layout. This memory region, typically part
of EFI Boot Services (BS) data, can be overwritten after ExitBootServices
if not explicitly preserved by the kernel.
This commit addresses this by:
1. Calling memblock_reserve() to reserve the entire physical region
occupied by the EFI memory map (header + descriptors). This prevents
the primary kernel from reallocating and corrupting this area.
2. Setting the EFI_PRESERVE_BS_REGIONS flag in efi.flags. This indicates
that efforts have been made to preserve critical BS code/data regions
which can be useful for other kernel subsystems or debugging.
These changes ensure the original EFI memory map data remains intact,
improving kdump reliability and potentially aiding other EFI-related
functionalities that might rely on preserved BS code/data.
Signed-off-by: Ming Wang <wangming01@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
After commit a934a57a42f64a4 ("scripts/misc-check: check missing #include
<linux/export.h> when W=1") and 7d95680d64ac8e836c ("scripts/misc-check:
check unnecessary #include <linux/export.h> when W=1"), we get some build
warnings with W=1:
arch/loongarch/kernel/acpi.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
arch/loongarch/kernel/alternative.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
arch/loongarch/kernel/kfpu.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
arch/loongarch/kernel/traps.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
arch/loongarch/kernel/unwind_guess.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
arch/loongarch/kernel/unwind_orc.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
arch/loongarch/kernel/unwind_prologue.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
arch/loongarch/lib/crc32-loongarch.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
arch/loongarch/lib/csum.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
arch/loongarch/kernel/elf.c: warning: EXPORT_SYMBOL() is not used, but #include <linux/export.h> is present
arch/loongarch/kernel/paravirt.c: warning: EXPORT_SYMBOL() is not used, but #include <linux/export.h> is present
arch/loongarch/pci/pci.c: warning: EXPORT_SYMBOL() is not used, but #include <linux/export.h> is present
So fix these build warnings for LoongArch.
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
While the GCC and Clang compilers already define __ASSEMBLER__
automatically when compiling assembler code, __ASSEMBLY__ is a macro
that only gets defined by the Makefiles in the kernel. This is bad
since macros starting with two underscores are names that are reserved
by the C language. It can also be very confusing for the developers
when switching between userspace and kernelspace coding, or when
dealing with uapi headers that rather should use __ASSEMBLER__ instead.
So let's now standardize on the __ASSEMBLER__ macro that is provided
by the compilers.
This is almost a completely mechanical patch (done with a simple
"sed -i" statement), with one comment tweaked manually in the
arch/loongarch/include/asm/cpu.h file (it was missing the trailing
underscores).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Don't mix the namespace and controller values, and validate the
per-controller limit when probing the controller. This avoid spurious
failures for controllers with namespaces that have different namespaces
with different logical block sizes, or report the per-namespace values
only for some namespaces.
It also fixes a missing queue_limits_cancel_update in an error path by
removing that error path.
Fixes: 8695f060a029 ("nvme: all namespaces in a subsystem must adhere to a common atomic write size")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
|
|
Move all the code out of nvme_update_disk_info into the helper, and
rename the helper to have a somewhat less clumsy name.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
|
|
The remove_work will proceed with permanently disconnecting on the
initial final path failure if the head shows no paths after the delay.
If a new path connects while the remove_work is pending, and if that new
path happens to disconnect before that remove_work executes, the delayed
removal should reset based on the most recent path disconnect time, but
queue_delayed_work() won't do anything if the work is already pending.
Attempt to cancel the delayed work when a new path connects, and use
mod_delayed_work() in case the remove_work remains pending anyway.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
'rx_ring->size' means the count of ring descriptors multiplied by the
size of one descriptor. When increasing the count of ring descriptors,
it may exceed the limit of pool size.
[ 864.209610] page_pool_create_percpu() gave up with errno -7
[ 864.209613] txgbe 0000:11:00.0: Page pool creation failed: -7
Fix to set the pool_size to the count of ring descriptors.
Fixes: 850b971110b2 ("net: libwx: Allocate Rx and Tx resources")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/434C72BFB40E350A+20250625023924.21821-1-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The length in the pseudo header should be the length of the L3 payload
AKA the L4 header+payload. The selftest code builds the packet from
the lower layers up, so all the headers are pushed already when it
constructs L4. We need to subtract the lower layer headers from skb->len.
Fixes: 3e1e58d64c3d ("net: add generic selftest support")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reported-by: Oleksij Rempel <o.rempel@pengutronix.de>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250624183258.3377740-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
If an AUX event overruns, the event core layer intends to disable the
event by setting the 'pending_disable' flag. Unfortunately, the event
is not actually disabled afterwards.
In commit:
ca6c21327c6a ("perf: Fix missing SIGTRAPs")
the 'pending_disable' flag was changed to a boolean. However, the
AUX event code was not updated accordingly. The flag ends up holding a
CPU number. If this number is zero, the flag is taken as false and the
IRQ work is never triggered.
Later, with commit:
2b84def990d3 ("perf: Split __perf_pending_irq() out of perf_pending_irq()")
a new IRQ work 'pending_disable_irq' was introduced to handle event
disabling. The AUX event path was not updated to kick off the work queue.
To fix this bug, when an AUX ring buffer overrun is detected, call
perf_event_disable_inatomic() to initiate the pending disable flow.
Also update the outdated comment for setting the flag, to reflect the
boolean values (0 or 1).
Fixes: 2b84def990d3 ("perf: Split __perf_pending_irq() out of perf_pending_irq()")
Fixes: ca6c21327c6a ("perf: Fix missing SIGTRAPs")
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Liang Kan <kan.liang@linux.intel.com>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: linux-perf-users@vger.kernel.org
Link: https://lore.kernel.org/r/20250625170737.2918295-1-leo.yan@arm.com
|
|
The built-in mic of ASUS VivoBook X507UAR is broken recently by the fix
of the pin sort. The fixup ALC256_FIXUP_ASUS_MIC_NO_PRESENCE is working
for addressing the regression, too.
Fixes: 3b4309546b48 ("ALSA: hda: Fix headset detection failure due to unstable sort")
Reported-by: Igor Tamara <igor.tamara@gmail.com>
Closes: https://bugs.debian.org/1108069
Signed-off-by: Salvatore Bonaccorso <carnil@debian.org>
Link: https://lore.kernel.org/CADdHDco7_o=4h_epjEAb92Dj-vUz_PoTC2-W9g5ncT2E0NzfeQ@mail.gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.16
A small collection of fixes, the main one being a fix for resume from
hibernation on AMD systems, plus a few new quirk entries for AMD
systems.
|
|
Pull bpf fixes from Alexei Starovoitov:
- Fix use-after-free in libbpf when map is resized (Adin Scannell)
- Fix verifier assumptions about 2nd argument of bpf_sysctl_get_name
(Jerome Marchand)
- Fix verifier assumption of nullness of d_inode in dentry (Song Liu)
- Fix global starvation of LRU map (Willem de Bruijn)
- Fix potential NULL dereference in btf_dump__free (Yuan Chen)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: adapt one more case in test_lru_map to the new target_free
libbpf: Fix possible use-after-free for externs
selftests/bpf: Convert test_sysctl to prog_tests
bpf: Specify access type of bpf_sysctl_get_name args
libbpf: Fix null pointer dereference in btf_dump__free on allocation failure
bpf: Adjust free target to avoid global starvation of LRU map
bpf: Mark dentry->d_inode as trusted_or_null
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Fix a 6.16 regression from the recovery pass rework, which introduced a
bug where calling bch2_run_explicit_recovery_pass() would only return
the error code to rewind recovery for the first call that scheduled that
recovery pass.
If the error code from the first call was swallowed (because it was
called by an asynchronous codepath), subsequent calls would go "ok, this
pass is already marked as needing to run" and return 0.
Fixing this ensures that check_topology bails out to run btree_node_scan
before doing any repair.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Previously, calling bch2_btree_has_scanned_nodes() when btree node
scan hadn't actually run would erroniously return false - causing us to
think a btree was entirely gone.
This fixes a 6.16 regression from moving the scheduling of btree node
scan out of bch2_btree_lost_data() (fixing the bug where we'd schedule
it persistently in the superblock) and only scheduling it when
check_toploogy() is asking for scanned btree nodes.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Autofix is specified in btree_gc.c if it's not an important btree.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Pull mount fixes from Al Viro:
"Several mount-related fixes"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
userns and mnt_idmap leak in open_tree_attr(2)
attach_recursive_mnt(): do not lock the covering tree when sliding something under it
replace collect_mounts()/drop_collected_mounts() with a safer variant
|
