Age | Commit message (Collapse) | Author |
|
In case a TPM in failure mode is detected, the TPM should be accessible
through a transparent communication channel for analysing purposes (e.g.
TPM_GetTestResult) or a field upgrade. Since a TPM in failure mode has
similar reduced functionality as in field upgrade mode, the flag
TPM_CHIP_FLAG_FIRMWARE_UPGRADE is also valid.
As described in TCG TPM Main Part1 Design Principles, Revision 116,
chapter 9.2.1. the TPM also allows an update function in case a TPM is
in failure mode.
If the TPM in failure mode is detected, the function tpm1_auto_startup()
sets TPM_CHIP_FLAG_FIRMWARE_UPGRADE flag, which is used later during
driver initialization/deinitialization to disable functionality which
makes no sense or will fail in the current TPM state. The following
functionality is affected:
* Do not register TPM as a hwrng
* Do not get pcr allocation
* Do not register sysfs entries which provide information impossible to
obtain in limited mode
Signed-off-by: Stefan Mahnke-Hartmann <stefan.mahnke-hartmann@infineon.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs iov_iter updates from Al Viro:
"Part 1 - isolated cleanups and optimizations.
One of the goals is to reduce the overhead of using ->read_iter() and
->write_iter() instead of ->read()/->write().
new_sync_{read,write}() has a surprising amount of overhead, in
particular inside iocb_flags(). That's the explanation for the
beginning of the series is in this pile; it's not directly
iov_iter-related, but it's a part of the same work..."
* tag 'pull-work.iov_iter-base' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
first_iovec_segment(): just return address
iov_iter: massage calling conventions for first_{iovec,bvec}_segment()
iov_iter: first_{iovec,bvec}_segment() - simplify a bit
iov_iter: lift dealing with maxpages out of first_{iovec,bvec}_segment()
iov_iter_get_pages{,_alloc}(): cap the maxsize with MAX_RW_COUNT
iov_iter_bvec_advance(): don't bother with bvec_iter
copy_page_{to,from}_iter(): switch iovec variants to generic
keep iocb_flags() result cached in struct file
iocb: delay evaluation of IS_SYNC(...) until we want to check IOCB_DSYNC
struct file: use anonymous union member for rcuhead and llist
btrfs: use IOMAP_DIO_NOSYNC
teach iomap_dio_rw() to suppress dsync
No need of likely/unlikely on calls of check_copy_size()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs dcache updates from Al Viro:
"The main part here is making parallel lookups safe for RT - making
sure preemption is disabled in start_dir_add()/ end_dir_add() sections
(on non-RT it's automatic, on RT it needs to to be done explicitly)
and moving wakeups from __d_lookup_done() inside of such to the end of
those sections.
Wakeups can be safely delayed for as long as ->d_lock on in-lookup
dentry is held; proving that has caught a bug in d_add_ci() that
allows memory corruption when sufficiently bogus ntfs (or
case-insensitive xfs) image is mounted. Easily fixed, fortunately"
* tag 'pull-work.dcache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs/dcache: Move wakeup out of i_seq_dir write held region.
fs/dcache: Move the wakeup from __d_lookup_done() to the caller.
fs/dcache: Disable preemption on i_dir_seq write side on PREEMPT_RT
d_add_ci(): make sure we don't miss d_lookup_done()
|
|
hmm-tests.c:1607:42: error: 'HMM_DMIRROR_MIGRATE' undeclared (first use in this function); did you mean 'HMM_DMIRROR_WRITE'?
Fixes: f6c3e1ae0114cd0 ("mm/hmm: add a test for cross device private faults")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs lseek updates from Al Viro:
"Jason's lseek series.
Saner handling of 'lseek should fail with ESPIPE' - this gets rid of
the magical no_llseek thing and makes checks consistent.
In particular, the ad-hoc "can we do splice via internal pipe" checks
got saner (and somewhat more permissive, which is what Jason had been
after, AFAICT)"
* tag 'pull-work.lseek' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: remove no_llseek
fs: check FMODE_LSEEK to control internal pipe splicing
vfio: do not set FMODE_LSEEK flag
dma-buf: remove useless FMODE_LSEEK flag
fs: do not compare against ->llseek
fs: clear or set FMODE_LSEEK based on llseek function
|
|
Document the constraints (number of GPIOs) for PM8226 variant.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220726115202.99108-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs namei updates from Al Viro:
"RCU pathwalk cleanups.
Storing sampled ->d_seq of the next dentry in nameidata simplifies
life considerably, especially if we delay fetching ->d_inode until
step_into()"
* tag 'pull-work.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
step_into(): move fetching ->d_inode past handle_mounts()
lookup_fast(): don't bother with inode
follow_dotdot{,_rcu}(): don't bother with inode
step_into(): lose inode argument
namei: stash the sampled ->d_seq into nameidata
namei: move clearing LOOKUP_RCU towards rcu_read_unlock()
switch try_to_unlazy_next() to __legitimize_mnt()
follow_dotdot{,_rcu}(): change calling conventions
namei: get rid of pointless unlikely(read_seqcount_retry(...))
__follow_mount_rcu(): verify that mount_lock remains unchanged
|
|
All the many other configs depend on config PINCTRL_MSM, yet for config
PINCTRL_SM8450 we select config PINCTRL_MSM. Make config PINCTRL_SM8450
depend on PINCTRL_MSM to be consistent with the rest.
Signed-off-by: John Garry <john.garry@huawei.com>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/1658829764-124936-1-git-send-email-john.garry@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Fixes speaker output on HP Spectre x360 15-eb0xxx
[ re-sorted in SSID order by tiwai ]
Signed-off-by: Ivan Hasenkampf <ivan.hasenkampf@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220803164001.290394-1-ivan.hasenkampf@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Fix the PDC mapping for SM8250, gpio39 is mapped to irq73(not irq37).
Fixes: b41efeed507a("pinctrl: qcom: sm8250: Specify PDC map.")
Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20220803015645.22388-1-lujianhua000@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
`char *output_enable` is no longer used once switching to unicode
output.
Fixes: e8129a076a50 ("pinctrl: amd: Use unicode for debugfs output")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220801144952.141-1-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Pull folio updates from Matthew Wilcox:
- Fix an accounting bug that made NR_FILE_DIRTY grow without limit
when running xfstests
- Convert more of mpage to use folios
- Remove add_to_page_cache() and add_to_page_cache_locked()
- Convert find_get_pages_range() to filemap_get_folios()
- Improvements to the read_cache_page() family of functions
- Remove a few unnecessary checks of PageError
- Some straightforward filesystem conversions to use folios
- Split PageMovable users out from address_space_operations into
their own movable_operations
- Convert aops->migratepage to aops->migrate_folio
- Remove nobh support (Christoph Hellwig)
* tag 'folio-6.0' of git://git.infradead.org/users/willy/pagecache: (78 commits)
fs: remove the NULL get_block case in mpage_writepages
fs: don't call ->writepage from __mpage_writepage
fs: remove the nobh helpers
jfs: stop using the nobh helper
ext2: remove nobh support
ntfs3: refactor ntfs_writepages
mm/folio-compat: Remove migration compatibility functions
fs: Remove aops->migratepage()
secretmem: Convert to migrate_folio
hugetlb: Convert to migrate_folio
aio: Convert to migrate_folio
f2fs: Convert to filemap_migrate_folio()
ubifs: Convert to filemap_migrate_folio()
btrfs: Convert btrfs_migratepage to migrate_folio
mm/migrate: Add filemap_migrate_folio()
mm/migrate: Convert migrate_page() to migrate_folio()
nfs: Convert to migrate_folio
btrfs: Convert btree_migratepage to migrate_folio
mm/migrate: Convert expected_page_refs() to folio_expected_refs()
mm/migrate: Convert buffer_migrate_page() to buffer_migrate_folio()
...
|
|
A build with -D_FORTIFY_SOURCE=2 enabled will produce the following warnings:
sysfs.c:63:30: warning: '%s' directive output may be truncated writing up to 255 bytes into a region of size between 0 and 255 [-Wformat-truncation=]
snprintf(filepath, 256, "%s/%s", path, filename);
^~
Bump up the buffer to PATH_MAX which is the limit and account for all of
the possible NUL and separators that could lead to exceeding the
allocated buffer sizes.
Fixes: 94f69966faf8 ("tools/thermal: Introduce tmon, a tool for thermal subsystem")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Since commit 0166dc11be91 ("of: make CONFIG_OF user selectable"), it
is possible to test-build any driver which depends on OF on any
architecture by explicitly selecting OF. Therefore depending on
COMPILE_TEST as an alternative is no longer needed.
It is actually better to always build such drivers with OF enabled,
so that the test builds are closer to how each driver will actually be
built on its intended target. Building them without OF may not test
much as the compiler will optimize out potentially large parts of the
code. In the worst case, this could even pop false positive warnings.
Dropping COMPILE_TEST here improves the quality of our testing and
avoids wasting time on non-existent issues.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
If cooling_device_stats_setup() fails to create the stats object, it
must clear the last slot in cooling_device_attr_groups that was
initially empty (so as to make it possible to add stats attributes to
the cooling device attribute groups).
Failing to do so may cause the stats attributes to be created by
mistake for a device that doesn't have a stats object, because the
slot in question might be populated previously during the registration
of another cooling device.
Fixes: 8ea229511e06 ("thermal: Add cooling device's statistics in sysfs")
Reported-by: Di Shen <di.shen@unisoc.com>
Tested-by: Di Shen <di.shen@unisoc.com>
Cc: 4.17+ <stable@vger.kernel.org> # 4.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add Alder Lake-N and Raptor Lake-P to the list of processor models
supported by the Intel TCC cooling driver.
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Pull XArray/IDR updates from Matthew Wilcox:
- Add appropriate might_alloc() annotations to the XArray APIs
- Document that the IDR is deprecated
* tag 'xarray-6.0' of git://git.infradead.org/users/willy/xarray:
IDR: Note that the IDR API is deprecated
XArray: Add calls to might_alloc()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
"Several core optimizations:
- threadgroup_rwsem write locking is skipped when configuring
controllers in empty subtrees.
Combined with CLONE_INTO_CGROUP, this allows the common static
usage pattern to not grab threadgroup_rwsem at all (glibc still
doesn't seem ready for CLONE_INTO_CGROUP unfortunately).
- threadgroup_rwsem used to be put into non-percpu mode by default
due to latency concerns in specific use cases. There's no reason
for everyone else to pay for it. Make the behavior optional.
- psi no longer allocates memory when disabled.
... along with some code cleanups"
* tag 'cgroup-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Skip subtree root in cgroup_update_dfl_csses()
cgroup: remove "no" prefixed mount options
cgroup: Make !percpu threadgroup_rwsem operations optional
cgroup: Add "no" prefixed mount options
cgroup: Elide write-locking threadgroup_rwsem when updating csses on an empty subtree
cgroup.c: remove redundant check for mixable cgroup in cgroup_migrate_vet_dst
cgroup.c: add helper __cset_cgroup_from_root to cleanup duplicated codes
psi: dont alloc memory for psi by default
|
|
Both, GEM and FB, CMA helpers were renamed to "GEM DMA" and "FB DMA",
hence the task can be removed.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-6-dakr@redhat.com
|
|
The field paddr of struct drm_gem_dma_object holds a DMA address, which
might actually be a physical address. However, depending on the platform,
it can also be a bus address or a virtual address managed by an IOMMU.
Hence, rename the field to dma_addr, which is more applicable.
In order to do this renaming the following coccinelle script was used:
```
@@
struct drm_gem_dma_object *gem;
@@
- gem->paddr
+ gem->dma_addr
@@
struct drm_gem_dma_object gem;
@@
- gem.paddr
+ gem.dma_addr
@exists@
typedef dma_addr_t;
symbol paddr;
@@
dma_addr_t paddr;
<...
- paddr
+ dma_addr
...>
@@
symbol paddr;
@@
dma_addr_t
- paddr
+ dma_addr
;
```
This patch is compile-time tested with:
```
make ARCH={x86_64,arm,arm64} allyesconfig
make ARCH={x86_64,arm,arm64} drivers/gpu/drm`
```
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-5-dakr@redhat.com
|
|
Rename "GEM CMA" helpers to "GEM DMA" helpers - considering the
hierarchy of APIs (mm/cma -> dma -> gem dma) calling them "GEM
DMA" seems to be more applicable.
Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers")
requests to rename the CMA helpers and implies that people seem to be
confused about the naming.
In order to do this renaming the following script was used:
```
#!/bin/bash
DIRS="drivers/gpu include/drm Documentation/gpu"
REGEX_SYM_UPPER="[0-9A-Z_\-]"
REGEX_SYM_LOWER="[0-9a-z_\-]"
REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(GEM)_CMA_(${REGEX_SYM_UPPER}*)"
REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(gem)_cma_(${REGEX_SYM_LOWER}*)"
REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g"
REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g"
# Find all upper case 'CMA' symbols and replace them with 'DMA'.
for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS)
do
sed -i -E "$REGEX_SED_UPPER" $ff
done
# Find all lower case 'cma' symbols and replace them with 'dma'.
for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS)
do
sed -i -E "$REGEX_SED_LOWER" $ff
done
# Replace all occurrences of 'CMA' / 'cma' in comments and
# documentation files with 'DMA' / 'dma'.
for ff in $(grep -RiHl " cma " $DIRS)
do
sed -i -E "s/ cma / dma /g" $ff
sed -i -E "s/ CMA / DMA /g" $ff
done
# Rename all 'cma_obj's to 'dma_obj'.
for ff in $(grep -RiHl "cma_obj" $DIRS)
do
sed -i -E "s/cma_obj/dma_obj/g" $ff
done
```
Only a few more manual modifications were needed, e.g. reverting the
following modifications in some DRM Kconfig files
- select CMA if HAVE_DMA_CONTIGUOUS
+ select DMA if HAVE_DMA_CONTIGUOUS
as well as manually picking the occurrences of 'CMA'/'cma' in comments and
documentation which relate to "GEM CMA", but not "FB CMA".
Also drivers/gpu/drm/Makefile was fixed up manually after renaming
drm_gem_cma_helper.c to drm_gem_dma_helper.c.
This patch is compile-time tested building a x86_64 kernel with
`make allyesconfig && make drivers/gpu/drm`.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> #drivers/gpu/drm/arm
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-4-dakr@redhat.com
|
|
Rename "FB CMA" helpers to "FB DMA" helpers - considering the hierarchy
of APIs (mm/cma -> dma -> fb dma) calling them "FB DMA" seems to be
more applicable.
Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers")
requests to rename the CMA helpers and implies that people seem to be
confused about the naming.
In order to do this renaming the following script was used:
```
#!/bin/bash
DIRS="drivers/gpu include/drm Documentation/gpu"
REGEX_SYM_UPPER="[0-9A-Z_\-]"
REGEX_SYM_LOWER="[0-9a-z_\-]"
REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(FB)_CMA_(${REGEX_SYM_UPPER}*)"
REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(fb)_cma_(${REGEX_SYM_LOWER}*)"
REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g"
REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g"
# Find all upper case 'CMA' symbols and replace them with 'DMA'.
for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS)
do
sed -i -E "$REGEX_SED_UPPER" $ff
done
# Find all lower case 'cma' symbols and replace them with 'dma'.
for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS)
do
sed -i -E "$REGEX_SED_LOWER" $ff
done
# Replace all occurrences of 'CMA' / 'cma' in comments and
# documentation files with 'DMA' / 'dma'.
for ff in $(grep -RiHl " cma " $DIRS)
do
sed -i -E "s/ cma / dma /g" $ff
sed -i -E "s/ CMA / DMA /g" $ff
done
```
Only a few more manual modifications were needed, e.g. reverting the
following modifications in some DRM Kconfig files
- select CMA if HAVE_DMA_CONTIGUOUS
+ select DMA if HAVE_DMA_CONTIGUOUS
as well as manually picking the occurrences of 'CMA'/'cma' in comments and
documentation which relate to "FB CMA", but not "GEM CMA".
This patch is compile-time tested building a x86_64 kernel with
`make allyesconfig && make drivers/gpu/drm`.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> #drivers/gpu/drm/arm
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-3-dakr@redhat.com
|
|
Quite a lot of drivers include the drm_fb_cma_helper.h header file
without actually making use of it's provided API, hence remove those
includes.
Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-2-dakr@redhat.com
|
|
This extracts common code from the branches of the forks if-then-else.
enable_counters(), which was at the beginning of both branches of the
conditional, is now unconditional; evlist__start_workload() is extracted
to a different if, which enables making the common clocking code
unconditional.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Adrián Herrera Arcila <adrian.herrera@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/r/20220729161244.10522-1-adrian.herrera@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a trace event for cpuidle to track missed (too deep or too shallow)
wakeups.
After each wakeup, CPUIdle already computes whether the entered state was
optimal, above or below the desired one and updates the relevant
counters. This patch makes it possible to trace those events in addition
to just reading the counters.
The patterns of types and percentages of misses across different
workloads appear to be very consistent. This makes the trace event very
useful for comparing the relative correctness of different CPUIdle
governors for different types of workloads, or for finding the
optimal governor for a given device.
Signed-off-by: Kajetan Puchalski <kajetan.puchalski@arm.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull operating performance points (OPP) updates for 5.20-rc1 from Viresh
Kumar:
"- Make dev_pm_opp_set_regulators() accept NULL terminated list (Viresh
Kumar).
- Add dev_pm_opp_set_config() and friends and migrate other
users/helpers to using them (Viresh Kumar).
- Add support for multiple clocks for a device (Viresh Kumar and
Krzysztof Kozlowski).
- Configure resources before adding OPP table for Venus (Stanimir
Varbanov).
- Keep reference count up for opp->np and opp_table->np while they are
still in use (Liang He).
- Minor cleanups (Viresh Kumar and Yang Li)."
* tag 'opp-updates-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: (43 commits)
venus: pm_helpers: Fix warning in OPP during probe
OPP: Don't drop opp->np reference while it is still in use
OPP: Don't drop opp_table->np reference while it is still in use
OPP: Remove dev{m}_pm_opp_of_add_table_noclk()
PM / devfreq: tegra30: Register config_clks helper
OPP: Allow config_clks helper for single clk case
OPP: Provide a simple implementation to configure multiple clocks
OPP: Assert clk_count == 1 for single clk helpers
OPP: Add key specific assert() method to key finding helpers
OPP: Compare bandwidths for all paths in _opp_compare_key()
OPP: Allow multiple clocks for a device
dt-bindings: opp: accept array of frequencies
OPP: Make dev_pm_opp_set_opp() independent of frequency
OPP: Reuse _opp_compare_key() in _opp_add_static_v2()
OPP: Remove rate_not_available parameter to _opp_add()
OPP: Use consistent names for OPP table instances
OPP: Use generic key finding helpers for bandwidth key
OPP: Use generic key finding helpers for level key
OPP: Add generic key finding helpers and use them for freq APIs
OPP: Remove dev_pm_opp_find_freq_ceil_by_volt()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull cpufreq/ARM updates for 5.20-rc1 from Viresh Kumar:
"- Fix return error code in mtk_cpu_dvfs_info_init (Yang Yingliang).
- Minor cleanups and support for new boards for Qcom cpufreq drivers
(Bryan O'Donoghue, Konrad Dybcio, Pierre Gondois, and Yicong Yang).
- Fix sparse warnings for Tegra driver (Viresh Kumar)."
* tag 'cpufreq-arm-updates-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: tegra194: Staticize struct tegra_cpufreq_soc instances
dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM6375 compatible
dt-bindings: opp: Add msm8939 to the compatible list
dt-bindings: opp: Add missing compat devices
dt-bindings: opp: opp-v2-kryo-cpu: Fix example binding checks
cpufreq: Change order of online() CB and policy->cpus modification
cpufreq: qcom-hw: Remove deprecated irq_set_affinity_hint() call
cpufreq: qcom-hw: Disable LMH irq when disabling policy
cpufreq: qcom-hw: Reset cancel_throttle when policy is re-enabled
cpufreq: qcom-cpufreq-hw: use HZ_PER_KHZ macro in units.h
cpufreq: mediatek: fix error return code in mtk_cpu_dvfs_info_init()
|
|
Function ni_ins_new_attr now returns ERR_PTR(err),
so we check it now in other functions like ni_expand_mft_list
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Also removed uninformative print
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Added done and undo labels for restoring after errors
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Added comments to code
Added new function run_clone to make a copy of run
Added done and undo labels for restoring after errors
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Added comments to code
Added two undo labels for restoring after errors
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
There are repetitive steps in case of bad inode
This commit wraps them in function
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Now we take free space after the MFT zone if the MFT zone shrinks.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Checking in advance speeds things up in some cases.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Added some comments in frecord.c for more context.
Also changed run_lookup to static because it's an internal function.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Work with names must be completed in ni_add_name
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
attr_load_runs is an internal function
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
This argument helps in avoiding double locking
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Cleaning up dead code
Fix wrong comments
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
In some cases we need to ni_find_attr attr_b
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
In some cases xattr is too fragmented,
so we need to load it before writing.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
In some cases we need to return ENOSPC
Fixes xfstest generic/213
Fixes: 114346978cf6 ("fs/ntfs3: Check new size for limits")
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Fixes xfstest generic/300
Fixes: 4534a70b7056 ("fs/ntfs3: Add headers and misc files")
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Also don't mask EFBIG
Fixes xfstest generic/485
Fixes: 4342306f0f0d ("fs/ntfs3: Add file operations and implementation")
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
ntfs_set_ea can fail with NOSPC, so we don't need to
change mode in this situation.
Fixes xfstest generic/449
Fixes: be71b5cba2e6 ("fs/ntfs3: Add attrib operations")
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
During MU initialization, there maybe pending GSR and RSR pending
interrupt, clear them to avoid unexpected kernel dump when requesting
mailbox channel
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The two parameters of 'res' and 'cflags' are swapped, so fix it.
Without this fix, 'ublk del' hangs forever.
Cc: Pavel Begunkov <asml.silence@gmail.com>
Fixes: de23077eda61f ("io_uring: set completion results upfront")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220803120757.1668278-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The section name of Rel and Rela starts with ".rel" and ".rela"
respectively (but, I do not know whether this is specification or
convention).
For example, ".rela.text" holds relocation entries applied to the
".text" section.
So, the code chops the ".rel" or ".rela" prefix to get the name of
the section to which the relocation applies.
However, I do not like to skip 4 or 5 bytes blindly because it is
potential memory overrun.
The ELF specification provides a more reliable way to do this.
- The sh_info field holds extra information, whose interpretation
depends on the section type
- If the section type is SHT_REL or SHT_RELA, the sh_info field holds
the section header index of the section to which the relocation
applies.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The section index is always positive, so the argument, secindex, should
be unsigned.
Also, inserted the array range check.
If sym->st_shndx is a special section index (between SHN_LORESERVE and
SHN_HIRESERVE), there is no corresponding section header.
For example, if a symbol specifies an absolute value, sym->st_shndx is
SHN_ABS (=0xfff1).
The current users do not cause the out-of-range access of
info->sechddrs[], but it is better to avoid such a pitfall.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|