| Age | Commit message (Collapse) | Author |
|---|
|
It is difficult to intuit the semantics of owning and non-owning
references from verifier code. In order to keep the high-level details
from being lost in the mailing list, this patch adds documentation
explaining semantics and details.
The target audience of doc added in this patch is folks working on BPF
internals, as there's focus on "what should the verifier do here". Via
reorganization or copy-and-paste, much of the content can probably be
repurposed for BPF program writer audience as well.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230214004017.2534011-9-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch adds selftests exercising the logic changed/added in the
previous patches in the series. A variety of successful and unsuccessful
rbtree usages are validated:
Success:
* Add some nodes, let map_value bpf_rbtree_root destructor clean them
up
* Add some nodes, remove one using the non-owning ref leftover by
successful rbtree_add() call
* Add some nodes, remove one using the non-owning ref returned by
rbtree_first() call
Failure:
* BTF where bpf_rb_root owns bpf_list_node should fail to load
* BTF where node of type X is added to tree containing nodes of type Y
should fail to load
* No calling rbtree api functions in 'less' callback for rbtree_add
* No releasing lock in 'less' callback for rbtree_add
* No removing a node which hasn't been added to any tree
* No adding a node which has already been added to a tree
* No escaping of non-owning references past their lock's
critical section
* No escaping of non-owning references past other invalidation points
(rbtree_remove)
These tests mostly focus on rbtree-specific additions, but some of the
failure cases revalidate scenarios common to both linked_list and rbtree
which are covered in the former's tests. Better to be a bit redundant in
case linked_list and rbtree semantics deviate over time.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230214004017.2534011-8-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
These kfuncs will be used by selftests in following patches
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230214004017.2534011-7-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Newly-added bpf_rbtree_{remove,first} kfuncs have some special properties
that require handling in the verifier:
* both bpf_rbtree_remove and bpf_rbtree_first return the type containing
the bpf_rb_node field, with the offset set to that field's offset,
instead of a struct bpf_rb_node *
* mark_reg_graph_node helper added in previous patch generalizes
this logic, use it
* bpf_rbtree_remove's node input is a node that's been inserted
in the tree - a non-owning reference.
* bpf_rbtree_remove must invalidate non-owning references in order to
avoid aliasing issue. Use previously-added
invalidate_non_owning_refs helper to mark this function as a
non-owning ref invalidation point.
* Unlike other functions, which convert one of their input arg regs to
non-owning reference, bpf_rbtree_first takes no arguments and just
returns a non-owning reference (possibly null)
* For now verifier logic for this is special-cased instead of
adding new kfunc flag.
This patch, along with the previous one, complete special verifier
handling for all rbtree API functions added in this series.
With functional verifier handling of rbtree_remove, under current
non-owning reference scheme, a node type with both bpf_{list,rb}_node
fields could cause the verifier to accept programs which remove such
nodes from collections they haven't been added to.
In order to prevent this, this patch adds a check to btf_parse_fields
which rejects structs with both bpf_{list,rb}_node fields. This is a
temporary measure that can be removed after "collection identity"
followup. See comment added in btf_parse_fields. A linked_list BTF test
exercising the new check is added in this patch as well.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230214004017.2534011-6-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Some BPF helpers take a callback function which the helper calls. For
each helper that takes such a callback, there's a special call to
__check_func_call with a callback-state-setting callback that sets up
verifier bpf_func_state for the callback's frame.
kfuncs don't have any of this infrastructure yet, so let's add it in
this patch, following existing helper pattern as much as possible. To
validate functionality of this added plumbing, this patch adds
callback handling for the bpf_rbtree_add kfunc and hopes to lay
groundwork for future graph datastructure callbacks.
In the "general plumbing" category we have:
* check_kfunc_call doing callback verification right before clearing
CALLER_SAVED_REGS, exactly like check_helper_call
* recognition of func_ptr BTF types in kfunc args as
KF_ARG_PTR_TO_CALLBACK + propagation of subprogno for this arg type
In the "rbtree_add / graph datastructure-specific plumbing" category:
* Since bpf_rbtree_add must be called while the spin_lock associated
with the tree is held, don't complain when callback's func_state
doesn't unlock it by frame exit
* Mark rbtree_add callback's args with ref_set_non_owning
to prevent rbtree api functions from being called in the callback.
Semantically this makes sense, as less() takes no ownership of its
args when determining which comes first.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230214004017.2534011-5-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Now that we find bpf_rb_root and bpf_rb_node in structs, let's give args
that contain those types special classification and properly handle
these types when checking kfunc args.
"Properly handling" these types largely requires generalizing similar
handling for bpf_list_{head,node}, with little new logic added in this
patch.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230214004017.2534011-4-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch adds implementations of bpf_rbtree_{add,remove,first}
and teaches verifier about their BTF_IDs as well as those of
bpf_rb_{root,node}.
All three kfuncs have some nonstandard component to their verification
that needs to be addressed in future patches before programs can
properly use them:
* bpf_rbtree_add: Takes 'less' callback, need to verify it
* bpf_rbtree_first: Returns ptr_to_node_type(off=rb_node_off) instead
of ptr_to_rb_node(off=0). Return value ref is
non-owning.
* bpf_rbtree_remove: Returns ptr_to_node_type(off=rb_node_off) instead
of ptr_to_rb_node(off=0). 2nd arg (node) is a
non-owning reference.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230214004017.2534011-3-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch adds special BPF_RB_{ROOT,NODE} btf_field_types similar to
BPF_LIST_{HEAD,NODE}, adds the necessary plumbing to detect the new
types, and adds bpf_rb_root_free function for freeing bpf_rb_root in
map_values.
structs bpf_rb_root and bpf_rb_node are opaque types meant to
obscure structs rb_root_cached rb_node, respectively.
btf_struct_access will prevent BPF programs from touching these special
fields automatically now that they're recognized.
btf_check_and_fixup_fields now groups list_head and rb_root together as
"graph root" fields and {list,rb}_node as "graph node", and does same
ownership cycle checking as before. Note that this function does _not_
prevent ownership type mixups (e.g. rb_root owning list_node) - that's
handled by btf_parse_graph_root.
After this patch, a bpf program can have a struct bpf_rb_root in a
map_value, but not add anything to nor do anything useful with it.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230214004017.2534011-2-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Fix a slew of kernel-doc warnings in pata_octeon_cf.c by changing
all "/**" comments to "/*" since they are not in kernel-doc format.
Fixes: 3c929c6f5aa7 ("libata: New driver for OCTEON SOC Compact Flash interface (v7).")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/all/202302101722.5O56RClE-lkp@intel.com/
Cc: David Daney <ddaney@caviumnetworks.com>
Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
Mark the Tiger Lake UP{3,4} AHCI controller as "low_power". This enables
S0ix to work out of the box. Otherwise this isn't working unless the
user manually sets /sys/class/scsi_host/*/link_power_management_policy.
Intel lists a total of 4 SATA controller IDs in [1] for those mobile
PCHs. This commit just adds the "AHCI" variant since I only tested
those.
[1]: https://cdrdv2.intel.com/v1/dl/getContent/631119
Signed-off-by: Simon Gaiser <simon@invisiblethingslab.com>
CC: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
Samsung MZ7LH drives are spewing messages like this in to dmesg with AMD
SATA controllers:
ata1.00: exception Emask 0x0 SAct 0x7e0000 SErr 0x0 action 0x6 frozen
ata1.00: failed command: SEND FPDMA QUEUED
ata1.00: cmd 64/01:88:00:00:00/00:00:00:00:00/a0 tag 17 ncq dma 512 out
res 40/00:01:01:4f:c2/00:00:00:00:00/00 Emask
0x4 (timeout)
Since this was seen previously with SSD 840 EVO drives in
https://bugzilla.kernel.org/show_bug.cgi?id=203475 let's add the same
fix for these drives as the EVOs have, since they likely have very
similar firmwares.
Signed-off-by: Patrick McLean <chutzpah@gentoo.org>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
Set xdp_features netdevice flag if lan966x nic supports xdp mode.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/01f4412f28899d97b0054c9c1a63694201301b42.1676055718.git.lorenzo@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On JZ4760 and JZ4760B, SD cards fail to run if the maximum clock
rate is set to 50 MHz, even though the controller officially does
support it.
Until the actual bug is found and fixed, limit the maximum clock rate to
24 MHz.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230131210229.68129-1-paul@crapouillou.net
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
If mmc_add_host() fails, it doesn't need to call mmc_remove_host(),
or it will cause null-ptr-deref, because of deleting a not added
device in mmc_remove_host().
To fix this, goto label 'fail_glue_init', if mmc_add_host() fails,
and change the label 'fail_add_host' to 'fail_gpiod_request'.
Fixes: 15a0580ced08 ("mmc_spi host driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230131013835.3564011-1-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
If sdio_add_func() or sdio_init_func() fails, sdio_remove_func() can
not release the resources, because the sdio function is not presented
in these two cases, it won't call of_node_put() or put_device().
To fix these leaks, make sdio_func_present() only control whether
device_del() needs to be called or not, then always call of_node_put()
and put_device().
In error case in sdio_init_func(), the reference of 'card->dev' is
not get, to avoid redundant put in sdio_free_func_cis(), move the
get_device() to sdio_alloc_func() and put_device() to sdio_release_func(),
it can keep the get/put function be balanced.
Without this patch, while doing fault inject test, it can get the
following leak reports, after this fix, the leak is gone.
unreferenced object 0xffff888112514000 (size 2048):
comm "kworker/3:2", pid 65, jiffies 4294741614 (age 124.774s)
hex dump (first 32 bytes):
00 e0 6f 12 81 88 ff ff 60 58 8d 06 81 88 ff ff ..o.....`X......
10 40 51 12 81 88 ff ff 10 40 51 12 81 88 ff ff .@Q......@Q.....
backtrace:
[<000000009e5931da>] kmalloc_trace+0x21/0x110
[<000000002f839ccb>] mmc_alloc_card+0x38/0xb0 [mmc_core]
[<0000000004adcbf6>] mmc_sdio_init_card+0xde/0x170 [mmc_core]
[<000000007538fea0>] mmc_attach_sdio+0xcb/0x1b0 [mmc_core]
[<00000000d4fdeba7>] mmc_rescan+0x54a/0x640 [mmc_core]
unreferenced object 0xffff888112511000 (size 2048):
comm "kworker/3:2", pid 65, jiffies 4294741623 (age 124.766s)
hex dump (first 32 bytes):
00 40 51 12 81 88 ff ff e0 58 8d 06 81 88 ff ff .@Q......X......
10 10 51 12 81 88 ff ff 10 10 51 12 81 88 ff ff ..Q.......Q.....
backtrace:
[<000000009e5931da>] kmalloc_trace+0x21/0x110
[<00000000fcbe706c>] sdio_alloc_func+0x35/0x100 [mmc_core]
[<00000000c68f4b50>] mmc_attach_sdio.cold.18+0xb1/0x395 [mmc_core]
[<00000000d4fdeba7>] mmc_rescan+0x54a/0x640 [mmc_core]
Fixes: 3d10a1ba0d37 ("sdio: fix reference counting in sdio_remove_func()")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230130125808.3471254-1-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Some SDIO WiFi modules stopped working after SDIO interrupt mode
was added if cap_sdio_irq isn't set in device tree. This patch was
confirmed to fix the issue.
Fixes: 066ecde6d826 ("mmc: meson-gx: add SDIO interrupt support")
Reported-by: Geraldo Nascimento <geraldogabriel@gmail.com>
Tested-by: Geraldo Nascimento <geraldogabriel@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/816cba9f-ff92-31a2-60f0-aca542d1d13e@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
qcom,rpmcc bindings expect RPM clock controller to be named generic
"clock-controller":
rpm-glink: rpm-requests: 'qcom,rpmcc' does not match any of the regexes: '^regulators(-[01])?$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230208101545.45711-3-krzysztof.kozlowski@linaro.org
|
|
Bindings expect (and most of DTS use) the RPM G-Link node name to be
"rpm-requests".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230208101545.45711-2-krzysztof.kozlowski@linaro.org
|
|
Bindings expect (and most of DTS use) the RPM G-Link node name to be
"rpm-requests".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230208101545.45711-1-krzysztof.kozlowski@linaro.org
|
|
Enable the pinctrl, GCC clock and interconnect drivers in order to allow
booting SA8775P boards. The drivers need to be built-in for QUPv3 and
subsequently UART console to work.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Eric Chanudet <echanude@redhat.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230209103531.469809-1-brgl@bgdev.pl
|
|
The interconnect property is already present in the qce node, which
is the consumer of the cryptobam, so no need for an interconnect property
as documented by the bindings.
Fixes: 433477c3bf0b ("arm64: dts: qcom: sm8550: add QCrypto nodes")
Suggested-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230209-topic-sm8550-upstream-cryptobam-remove-interconnect-v1-1-84587c7bad0f@linaro.org
|
|
Tune the PWM to solve screen flashing issue and high frequency noise.
While at it, the comment for the PWM settings incorrectly said we were
using a 5kHz duty cycle. It should have said "period", not "duty cycle".
Correct this while updating the values.
Signed-off-by: Owen Yang <ecs.taipeikernel@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230213105803.v2.1.I610cef0ead2d5df1f7bd18bc0e0ae040b03725d0@changeid
|
|
Nodes like pwrkey, resin, iadc, adc-tm, temp-alarm which are the grand
children of spmi_bus node represent the interrupt generating devices but
don't have "interrupt-parent" property.
As per the devicetree spec v0.3, section 2.4:
"The physical wiring of an interrupt source to an interrupt controller is
represented in the devicetree with the interrupt-parent property. Nodes
that represent interrupt-generating devices contain an interrupt-parent
property which has a phandle value that points to the device to which the
device’s interrupts are routed, typically an interrupt controller. If an
interrupt-generating device does not have an interrupt-parent property,
its interrupt parent is assumed to be its devicetree parent."
This clearly says that if the "interrupt-parent" property is absent, then
the immediate devicetree parent will be assumed as the interrupt parent.
But the immediate parents of these nodes are not interrupt controllers
themselves.
This may lead to failure while wiring the interrupt for these nodes by an
operating system. But a few operating systems like Linux, workaround this
issue by walking up the parent nodes until it finds the "interrupt-cells"
property. Then the node that has the "interrupt-cells" property will be
used as the interrupt parent.
But this workaround is not as per the DT spec and is not being implemented
by other operating systems such as OpenBSD.
Hence, fix this issue by adding the "interrupts-extended" property that
explicitly specifies the spmi_bus node as the interrupt parent. Note that
the "interrupts-extended" property is chosen over "interrupt-parent" as it
allows specifying both interrupt parent phandle and interrupt specifiers in
a single property.
Reported-by: Patrick Wildt <patrick@blueri.se>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230213090118.11527-1-manivannan.sadhasivam@linaro.org
|
|
Enable all i2c busses where something is connected on this phone. Add
comments as placeholders for which components are still missing.
Also enable gpi_dma and the other qupv3 for that.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230213-fp4-more-i2c-v2-2-1c459c572f80@fairphone.com
|
|
Currently the dts contains a mix of status-as-first-property (old qcom
style) and status-as-last-property (new style).
Move all status properties down to the bottom once and for all so that
the style is consistent between different nodes.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230213-fp4-more-i2c-v2-1-1c459c572f80@fairphone.com
|
|
A special compatible was introduced for PMK8350 both in the driver and
the bindings to facilitate for 2 base registers (PBS & HLOS). Use it.
Fixes: b2de43136058 ("arm64: dts: qcom: pmk8350: Add peripherals for pmk8350")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230213212930.2115182-1-konrad.dybcio@linaro.org
|
|
The QCOM_PMIC_GLINK implements the parts of a TCPM necessary for
negotiating DP altmode and the TYPEC_MUX_GPIO_SBU driver is used for
controlling connection and orientation switching of the SBU lanes in the
USB-C connector Enable these to enable USB Type-C DisplayPort on
SC8280XP laptops.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230213215619.1362566-5-quic_bjorande@quicinc.com
|
|
Like on the CRD, add the necessary nodes to enable USB Type-C
altmode-based external display on the Lenovo ThinkPad X13s.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230213215619.1362566-4-quic_bjorande@quicinc.com
|
|
The SC8280XP CRD control over battery management and its two USB Type-C
port using pmic_glink and two GPIO-based SBU muxes.
Enable the two DisplayPort instances, GPIO SBU mux instance and
pmic_glink with the two connectors on the CRD.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230213215619.1362566-3-quic_bjorande@quicinc.com
|
|
Add the two DisplayPort controllers that are attached to QMP phys for
providing display output on USB Type-C.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230213215619.1362566-2-quic_bjorande@quicinc.com
|
|
Enable the GPU on the SM8350-HDK device. The ZAP shader is required for
the GPU to function properly.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230209133839.762631-7-dmitry.baryshkov@linaro.org
|
|
Add device nodes required to enable GPU on the SM8350 platform.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
[bjorn: Workaround for lacking RPMH_REGULATOR_LEVEL_LOW_SVS_L1 constant]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230209133839.762631-6-dmitry.baryshkov@linaro.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Twelve hotfixes, mostly against mm/.
Five of these fixes are cc:stable"
* tag 'mm-hotfixes-stable-2023-02-13-13-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
of: reserved_mem: Have kmemleak ignore dynamically allocated reserved mem
scripts/gdb: fix 'lx-current' for x86
lib: parser: optimize match_NUMBER apis to use local array
mm: shrinkers: fix deadlock in shrinker debugfs
mm: hwpoison: support recovery from ksm_might_need_to_copy()
kasan: fix Oops due to missing calls to kasan_arch_is_ready()
revert "squashfs: harden sanity check in squashfs_read_xattr_id_table"
fsdax: dax_unshare_iter() should return a valid length
mm/gup: add folio to list when folio_isolate_lru() succeed
aio: fix mremap after fork null-deref
mailmap: add entry for Alexander Mikhalitsyn
mm: extend max struct page size for kmsan
|
|
Finish reordering DT nodes by their address. Move PDC, tsens, AOSS,
SRAM, SPMI and TLMM nodes to the proper position.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230209133839.762631-5-dmitry.baryshkov@linaro.org
|
|
Continue ordering DT nodes by their address. Move RNG, UFS, system NoC
and SLPI nodes to the proper position.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230209133839.762631-4-dmitry.baryshkov@linaro.org
|
|
Somehow sm8350 got its device nodes not fully sorted. Start reordering
DT nodes by their address. Move apps SMMU, GIC, timer, apps RSC, cpufreq
ADSP and cDSP nodes to the end to the proper position at the end of
/soc/.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230209133839.762631-3-dmitry.baryshkov@linaro.org
|
|
This patch introduces non-owning reference semantics to the verifier,
specifically linked_list API kfunc handling. release_on_unlock logic for
refs is refactored - with small functional changes - to implement these
semantics, and bpf_list_push_{front,back} are migrated to use them.
When a list node is pushed to a list, the program still has a pointer to
the node:
n = bpf_obj_new(typeof(*n));
bpf_spin_lock(&l);
bpf_list_push_back(&l, n);
/* n still points to the just-added node */
bpf_spin_unlock(&l);
What the verifier considers n to be after the push, and thus what can be
done with n, are changed by this patch.
Common properties both before/after this patch:
* After push, n is only a valid reference to the node until end of
critical section
* After push, n cannot be pushed to any list
* After push, the program can read the node's fields using n
Before:
* After push, n retains the ref_obj_id which it received on
bpf_obj_new, but the associated bpf_reference_state's
release_on_unlock field is set to true
* release_on_unlock field and associated logic is used to implement
"n is only a valid ref until end of critical section"
* After push, n cannot be written to, the node must be removed from
the list before writing to its fields
* After push, n is marked PTR_UNTRUSTED
After:
* After push, n's ref is released and ref_obj_id set to 0. NON_OWN_REF
type flag is added to reg's type, indicating that it's a non-owning
reference.
* NON_OWN_REF flag and logic is used to implement "n is only a
valid ref until end of critical section"
* n can be written to (except for special fields e.g. bpf_list_node,
timer, ...)
Summary of specific implementation changes to achieve the above:
* release_on_unlock field, ref_set_release_on_unlock helper, and logic
to "release on unlock" based on that field are removed
* The anonymous active_lock struct used by bpf_verifier_state is
pulled out into a named struct bpf_active_lock.
* NON_OWN_REF type flag is introduced along with verifier logic
changes to handle non-owning refs
* Helpers are added to use NON_OWN_REF flag to implement non-owning
ref semantics as described above
* invalidate_non_owning_refs - helper to clobber all non-owning refs
matching a particular bpf_active_lock identity. Replaces
release_on_unlock logic in process_spin_lock.
* ref_set_non_owning - set NON_OWN_REF type flag after doing some
sanity checking
* ref_convert_owning_non_owning - convert owning reference w/
specified ref_obj_id to non-owning references. Set NON_OWN_REF
flag for each reg with that ref_obj_id and 0-out its ref_obj_id
* Update linked_list selftests to account for minor semantic
differences introduced by this patch
* Writes to a release_on_unlock node ref are not allowed, while
writes to non-owning reference pointees are. As a result the
linked_list "write after push" failure tests are no longer scenarios
that should fail.
* The test##missing_lock##op and test##incorrect_lock##op
macro-generated failure tests need to have a valid node argument in
order to have the same error output as before. Otherwise
verification will fail early and the expected error output won't be seen.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230212092715.1422619-2-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
There are several architectures that duplicate definitions of
map_page_into_agp(), unmap_page_from_agp() and flush_agp_cache().
Define those in asm-generic/agp.h and use it instead of duplicated
per-architecture headers.
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
There is a copy of alloc_gatt_pages() and free_gatt_pages in several
architectures in arch/$ARCH/include/asm/agp.h. All the copies do exactly
the same: alias alloc_gatt_pages() to __get_free_pages(GFP_KERNEL) and
alias free_gatt_pages() to free_pages().
Define alloc_gatt_pages() and free_gatt_pages() in drivers/char/agp/agp.h
and drop per-architecture definitions.
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
* irq/irqdomain-locking:
: .
: irqdomain locking overhaul courtesy of Johan Hovold.
:
: From the cover letter:
:
: "Parallel probing (e.g. due to asynchronous probing) of devices that
: share interrupts can currently result in two mappings for the same
: hardware interrupt to be created.
:
: This series fixes this mapping race and reworks the irqdomain locking so
: that in the end the global irq_domain_mutex is only used for managing
: the likewise global irq_domain_list, while domain operations (e.g. IRQ
: allocations) use per-domain (hierarchy) locking."
: .
irqdomain: Switch to per-domain locking
irqchip/mvebu-odmi: Use irq_domain_create_hierarchy()
irqchip/loongson-pch-msi: Use irq_domain_create_hierarchy()
irqchip/gic-v3-mbi: Use irq_domain_create_hierarchy()
irqchip/gic-v3-its: Use irq_domain_create_hierarchy()
irqchip/gic-v2m: Use irq_domain_create_hierarchy()
irqchip/alpine-msi: Use irq_domain_add_hierarchy()
x86/uv: Use irq_domain_create_hierarchy()
x86/ioapic: Use irq_domain_create_hierarchy()
irqdomain: Clean up irq_domain_push/pop_irq()
irqdomain: Drop leftover brackets
irqdomain: Drop dead domain-name assignment
irqdomain: Drop revmap mutex
irqdomain: Fix domain registration race
irqdomain: Fix mapping-creation race
irqdomain: Refactor __irq_domain_alloc_irqs()
irqdomain: Look for existing mapping only once
irqdomain: Drop bogus fwspec-mapping error handling
irqdomain: Fix disassociation race
irqdomain: Fix association race
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The IRQ domain structures are currently protected by the global
irq_domain_mutex. Switch to using more fine-grained per-domain locking,
which can speed up parallel probing by reducing lock contention.
On a recent arm64 laptop, the total time spent waiting for the locks
during boot drops from 160 to 40 ms on average, while the maximum
aggregate wait time drops from 550 to 90 ms over ten runs for example.
Note that the domain lock of the root domain (innermost domain) must be
used for hierarchical domains. For non-hierarchical domains (as for root
domains), the new root pointer is set to the domain itself so that
&domain->root->mutex always points to the right lock.
Also note that hierarchical domains should be constructed using
irq_domain_create_hierarchy() (or irq_domain_add_hierarchy()) to avoid
having racing allocations access a not fully initialised domain. As a
safeguard, the lockdep assertion in irq_domain_set_mapping() will catch
any offenders that also fail to set the root domain pointer.
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230213104302.17307-21-johan+linaro@kernel.org
|
|
Use the irq_domain_create_hierarchy() helper to create the hierarchical
domain, which both serves as documentation and avoids poking at
irqdomain internals.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230213104302.17307-20-johan+linaro@kernel.org
|
|
Use the irq_domain_create_hierarchy() helper to create the hierarchical
domain, which both serves as documentation and avoids poking at
irqdomain internals.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230213104302.17307-19-johan+linaro@kernel.org
|
|
Use the irq_domain_create_hierarchy() helper to create the hierarchical
domain, which both serves as documentation and avoids poking at
irqdomain internals.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230213104302.17307-18-johan+linaro@kernel.org
|
|
Use the irq_domain_create_hierarchy() helper to create the hierarchical
domain, which both serves as documentation and avoids poking at
irqdomain internals.
Note that the domain host_data was first set to the struct its_node
during allocation only to immediately be overwritten with the struct
msi_domain_info.
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230213104302.17307-17-johan+linaro@kernel.org
|
|
Use the irq_domain_create_hierarchy() helper to create the hierarchical
domain, which both serves as documentation and avoids poking at
irqdomain internals.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230213104302.17307-16-johan+linaro@kernel.org
|
|
Use the irq_domain_add_hierarchy() helper to create the hierarchical
domain, which both serves as documentation and avoids poking at
irqdomain internals.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230213104302.17307-15-johan+linaro@kernel.org
|
|
Use the irq_domain_create_hierarchy() helper to create the hierarchical
domain, which both serves as documentation and avoids poking at
irqdomain internals.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230213104302.17307-14-johan+linaro@kernel.org
|
|
Use the irq_domain_create_hierarchy() helper to create the hierarchical
domain, which both serves as documentation and avoids poking at
irqdomain internals.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230213104302.17307-13-johan+linaro@kernel.org
|
|
The irq_domain_push_irq() interface is used to add a new (outmost) level
to a hierarchical domain after IRQs have been allocated.
Possibly due to differing mental images of hierarchical domains, the
names used for the irq_data variables make these functions much harder
to understand than what they need to be.
Rename the struct irq_data pointer to the data embedded in the
descriptor as simply 'irq_data' and refer to the data allocated by this
interface as 'parent_irq_data' so that the names reflect how
hierarchical domains are implemented.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230213104302.17307-12-johan+linaro@kernel.org
|
