summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-02-13irqdomain: Drop leftover bracketsJohan Hovold
Drop some unnecessary brackets that were left in place when the corresponding code was updated. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Hsin-Yi Wang <hsinyi@chromium.org> Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230213104302.17307-11-johan+linaro@kernel.org
2023-02-13irqdomain: Drop dead domain-name assignmentJohan Hovold
Since commit d59f6617eef0 ("genirq: Allow fwnode to carry name information only") an IRQ domain is always given a name during allocation (e.g. used for the debugfs entry). Drop the leftover name assignment when allocating the first IRQ. Tested-by: Hsin-Yi Wang <hsinyi@chromium.org> Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230213104302.17307-10-johan+linaro@kernel.org
2023-02-13irqdomain: Drop revmap mutexJohan Hovold
The revmap mutex is essentially only used to maintain the integrity of the radix tree during updates (lookups use RCU). As the global irq_domain_mutex is now held in all paths that update the revmap structures there is strictly no longer any need for the dedicated mutex, which can be removed. Drop the revmap mutex and add lockdep assertions to the revmap helpers to make sure that the global lock is always held when updating the revmap. Tested-by: Hsin-Yi Wang <hsinyi@chromium.org> Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230213104302.17307-9-johan+linaro@kernel.org
2023-02-13irqdomain: Fix domain registration raceMarc Zyngier
Hierarchical domains created using irq_domain_create_hierarchy() are currently added to the domain list before having been fully initialised. This specifically means that a racing allocation request might fail to allocate irq data for the inner domains of a hierarchy in case the parent domain pointer has not yet been set up. Note that this is not really any issue for irqchip drivers that are registered early (e.g. via IRQCHIP_DECLARE() or IRQCHIP_ACPI_DECLARE()) but could potentially cause trouble with drivers that are registered later (e.g. modular drivers using IRQCHIP_PLATFORM_DRIVER_BEGIN(), gpiochip drivers, etc.). Fixes: afb7da83b9f4 ("irqdomain: Introduce helper function irq_domain_add_hierarchy()") Cc: stable@vger.kernel.org # 3.19 Signed-off-by: Marc Zyngier <maz@kernel.org> [ johan: add commit message ] Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230213104302.17307-8-johan+linaro@kernel.org
2023-02-13irqdomain: Fix mapping-creation raceJohan Hovold
Parallel probing of devices that share interrupts (e.g. when a driver uses asynchronous probing) can currently result in two mappings for the same hardware interrupt to be created due to missing serialisation. Make sure to hold the irq_domain_mutex when creating mappings so that looking for an existing mapping before creating a new one is done atomically. Fixes: 765230b5f084 ("driver-core: add asynchronous probing support for drivers") Fixes: b62b2cf5759b ("irqdomain: Fix handling of type settings for existing mappings") Link: https://lore.kernel.org/r/YuJXMHoT4ijUxnRb@hovoldconsulting.com Cc: stable@vger.kernel.org # 4.8 Cc: Dmitry Torokhov <dtor@chromium.org> Cc: Jon Hunter <jonathanh@nvidia.com> Tested-by: Hsin-Yi Wang <hsinyi@chromium.org> Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230213104302.17307-7-johan+linaro@kernel.org
2023-02-13irqdomain: Refactor __irq_domain_alloc_irqs()Johan Hovold
Refactor __irq_domain_alloc_irqs() so that it can be called internally while holding the irq_domain_mutex. This will be used to fix a shared-interrupt mapping race, hence the Fixes tag. Fixes: b62b2cf5759b ("irqdomain: Fix handling of type settings for existing mappings") Cc: stable@vger.kernel.org # 4.8 Tested-by: Hsin-Yi Wang <hsinyi@chromium.org> Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230213104302.17307-6-johan+linaro@kernel.org
2023-02-13irqdomain: Look for existing mapping only onceJohan Hovold
Avoid looking for an existing mapping twice when creating a new mapping using irq_create_fwspec_mapping() by factoring out the actual allocation which is shared with irq_create_mapping_affinity(). The new helper function will also be used to fix a shared-interrupt mapping race, hence the Fixes tag. Fixes: b62b2cf5759b ("irqdomain: Fix handling of type settings for existing mappings") Cc: stable@vger.kernel.org # 4.8 Tested-by: Hsin-Yi Wang <hsinyi@chromium.org> Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230213104302.17307-5-johan+linaro@kernel.org
2023-02-13irqdomain: Drop bogus fwspec-mapping error handlingJohan Hovold
In case a newly allocated IRQ ever ends up not having any associated struct irq_data it would not even be possible to dispose the mapping. Replace the bogus disposal with a WARN_ON(). This will also be used to fix a shared-interrupt mapping race, hence the CC-stable tag. Fixes: 1e2a7d78499e ("irqdomain: Don't set type when mapping an IRQ") Cc: stable@vger.kernel.org # 4.8 Tested-by: Hsin-Yi Wang <hsinyi@chromium.org> Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230213104302.17307-4-johan+linaro@kernel.org
2023-02-13irqdomain: Fix disassociation raceJohan Hovold
The global irq_domain_mutex is held when mapping interrupts from non-hierarchical domains but currently not when disposing them. This specifically means that updates of the domain mapcount is racy (currently only used for statistics in debugfs). Make sure to hold the global irq_domain_mutex also when disposing mappings from non-hierarchical domains. Fixes: 9dc6be3d4193 ("genirq/irqdomain: Add map counter") Cc: stable@vger.kernel.org # 4.13 Tested-by: Hsin-Yi Wang <hsinyi@chromium.org> Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230213104302.17307-3-johan+linaro@kernel.org
2023-02-13irqdomain: Fix association raceJohan Hovold
The sanity check for an already mapped virq is done outside of the irq_domain_mutex-protected section which means that an (unlikely) racing association may not be detected. Fix this by factoring out the association implementation, which will also be used in a follow-on change to fix a shared-interrupt mapping race. Fixes: ddaf144c61da ("irqdomain: Refactor irq_domain_associate_many()") Cc: stable@vger.kernel.org # 3.11 Tested-by: Hsin-Yi Wang <hsinyi@chromium.org> Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230213104302.17307-2-johan+linaro@kernel.org
2023-02-13ACPICA: Fix typo in CDAT DSMAS struct definitionLukas Wunner
ACPICA commit 9d8bd58d5f3495ce76d1b9767ec0b92251cbc366 Link: https://github.com/acpica/acpica/commit/9d8bd58d5f34 Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-13arm64: configs: Add virtconfigMark Brown
Provide a slimline configuration intended to be booted on virtual machines, with the goal of providing a light configuration which will boot on and enable features available in mach-virt. This is defined in terms of the standard defconfig, with an additional virt.config fragment which disables options unneeded in a virtual configuration. As a first step we just disable all the ARCH_ configuration options, disabling the build of all the SoC specific drivers. This results in a kernel that builds about 25% faster in my testing, if this approach works for people we can add further options. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20230203-arm64-defconfigs-v1-3-cd0694a05f13@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-02-13kbuild: Provide a version of merge_into_defconfig without override warningsMark Brown
While warning on overridden Kconfig options is a good default for merging config fragements sometimes that is our explicit intent and the warnings are unhelpful, add a new merge_into_defconfig_override which does the merge but with warnings suppressed. Since merge_into_defconfig accepts any number of fragments it is difficult to allow it to accept the flag. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20230203-arm64-defconfigs-v1-2-cd0694a05f13@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-02-13scripts: merge_config: Add option to suppress warning on overridesMark Brown
Currently merge_config.sh will unconditionally warn if a fragment overrides any already set symbol. This is generally desirable but is inconvenient in cases where we want to create a fragment which disables unwanted options in the base configuration, for example when attempting to produce a smaller version of another configuration. Add an option -Q which will suppress these warnings. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20230203-arm64-defconfigs-v1-1-cd0694a05f13@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-02-13ice: fix lost multicast packets in promisc modeJesse Brandeburg
There was a problem reported to us where the addition of a VF with an IPv6 address ending with a particular sequence would cause the parent device on the PF to no longer be able to respond to neighbor discovery packets. In this case, we had an ovs-bridge device living on top of a VLAN, which was on top of a PF, and it would not be able to talk anymore (the neighbor entry would expire and couldn't be restored). The root cause of the issue is that if the PF is asked to be in IFF_PROMISC mode (promiscuous mode) and it had an ipv6 address that needed the 33:33:ff:00:00:04 multicast address to work, then when the VF was added with the need for the same multicast address, the VF would steal all the traffic destined for that address. The ice driver didn't auto-subscribe a request of IFF_PROMISC to the "multicast replication from other port's traffic" meaning that it won't get for instance, packets with an exact destination in the VF, as above. The VF's IPv6 address, which adds a "perfect filter" for 33:33:ff:00:00:04, results in no packets for that multicast address making it to the PF (which is in promisc but NOT "multicast replication"). The fix is to enable "multicast promiscuous" whenever the driver is asked to enable IFF_PROMISC, and make sure to disable it when appropriate. Fixes: e94d44786693 ("ice: Implement filter sync, NDO operations and bump version") Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-13ACPI: resource: Do IRQ override on all TongFang GMxRGxxWerner Sembach
Apply commit 7592b79ba4a9 ("ACPI: resource: do IRQ override on XMG Core 15") override for all vendors using this mainboard. Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Fixes: 9946e39fe8d0 ("ACPI: resource: skip IRQ override on AMD Zen platforms") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-13Merge tag 'clocksource.2023.02.06b' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into timers/core Pull clocksource watchdog changes from Paul McKenney: o Improvements to clocksource-watchdog console messages. o Loosening of the clocksource-watchdog skew criteria to match those of NTP (500 parts per million, relaxed from 400 parts per million). If it is good enough for NTP, it is good enough for the clocksource watchdog. o Suspend clocksource-watchdog checking temporarily when high memory latencies are detected. This avoids the false-positive clock-skew events that have been seen on production systems running memory-intensive workloads. o On systems where the TSC is deemed trustworthy, use it as the watchdog timesource, but only when specifically requested using the tsc=watchdog kernel boot parameter. This permits clock-skew events to be detected, but avoids forcing workloads to use the slow HPET and ACPI PM timers. These last two timers are slow enough to cause systems to be needlessly marked bad on the one hand, and real skew does sometimes happen on production systems running production workloads on the other. And sometimes it is the fault of the TSC, or at least of the firmware that told the kernel to program the TSC with the wrong frequency. o Add a tsc=revalidate kernel boot parameter to allow the kernel to diagnose cases where the TSC hardware works fine, but was told by firmware to tick at the wrong frequency. Such cases are rare, but they really have happened on production systems. Link: https://lore.kernel.org/r/20230210193640.GA3325193@paulmck-ThinkPad-P17-Gen-1
2023-02-13ACPI: resource: Add IRQ overrides for MAINGEAR Vector Pro 2 modelsAdam Niederer
Fix a regression introduced by commit 9946e39fe8d0 ("ACPI: resource: skip IRQ override on AMD Zen platforms") on MAINGEAR Vector Pro 2 systems, which causes the built-in keyboard to not work. This restores the functionality by adding an IRQ override. No other IRQs were being overridden before, so this should be all that is needed for these systems. I have personally tested this on the 15" model (MG-VCP2-15A3070T), and I have confirmation that the issue is present on the 17" model (MG-VCP2-17A3070T). Fixes: 9946e39fe8d0 ("ACPI: resource: skip IRQ override on AMD Zen platforms") Signed-off-by: Adam Niederer <adam.niederer@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-13Merge tag 'timers-v6.3-rc1' of ↵Thomas Gleixner
https://git.linaro.org/people/daniel.lezcano/linux into timers/core Pull clocksource/event changes from Daniel Lezcano: - Add rktimer for rv1126 Rockchip based board (Jagan Teki) - Initialize hrtimer based broadcast clock event device on RISC-V before C3STOP can be used (Conor Dooley) - Add DT binding for RISC-V timer and add the C3STOP flag if the DT tells the timer can not wake up the CPU (Anup Patel) - Increase the RISC-V timer rating as it is more efficient than mmio timers (Samuel Holland) - Drop obsolete dependency on COMPILE_TEST on microchip-pit64b as the OF is already depending on it (Jean Delvare) - Mark sh_cmt, sh_tmu, em_sti drivers as non-removable (Uwe Kleine-König) - Add binding description for mediatek,mt8365-systimer (Bernhard Rosenkränzer) - Add compatibles for T-Head's C9xx (Icenowy Zheng) - Restrict the microchip-pit64b compilation to the ARM architecture and add the delay timer (Claudiu Beznea) - Set the static key to select the SBI or Sstc timer sooner to prevent the first call to use the SBI while Sstc must be used (Matt Evans) - Add the CLOCK_EVT_FEAT_DYNIRQ flag to optimize the timer wake up on the sun4i platform (Yangtao Li) Link: https://lore.kernel/org/r/b7d1d982-d717-2930-b353-19b92cbe390f@linaro.org
2023-02-13PM: Add EXPORT macros for exporting PM functionsRichard Fitzgerald
Add a pair of macros for exporting functions only if CONFIG_PM is enabled. The naming follows the style of the standard EXPORT_SYMBOL_*() macros that they replace. Sometimes a module wants to export PM functions directly to other drivers, not a complete struct dev_pm_ops. A typical example is where a core library exports the generic (shared) implementation and calling code wraps one or more of these in custom code. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-13Merge branch 'xdp-ice-mbuf'Daniel Borkmann
Alexander Lobakin says: ==================== The set grew from the poor performance of %BPF_F_TEST_XDP_LIVE_FRAMES when the ice-backed device is a sender. Initially there were around 3.3 Mpps / thread, while I have 5.5 on skb-based pktgen ... After fixing 0005 (0004 is a prereq for it) first (strange thing nobody noticed that earlier), I started catching random OOMs. This is how 0002 (and partially 0001) appeared. 0003 is a suggestion from Maciej to not waste time on refactoring dead lines. 0006 is a "cherry on top" to get away with the final 6.7 Mpps. 4.5 of 6 are fixes, but only the first three are tagged, since it then starts being tricky. I may backport them manually later on. TL;DR for the series is that shortcuts are good, but only as long as they don't make the driver miss important things. %XDP_TX is purely driver-local, however .ndo_xdp_xmit() is not, and sometimes assumptions can be unsafe there. With that series and also one core code patch[0], "live frames" and xdp-trafficgen are now safe'n'fast on ice (probably more to come). [0] https://lore.kernel.org/all/20230209172827.874728-1-alexandr.lobakin@intel.com ==================== Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2023-02-13ice: Micro-optimize .ndo_xdp_xmit() pathAlexander Lobakin
After the recent mbuf changes, ice_xmit_xdp_ring() became a 3-liner. It makes no sense to keep it global in a different file than its caller. Move it just next to the sole call site and mark static. Also, it doesn't need a full xdp_convert_frame_to_buff(). Save several cycles and fill only the fields used by __ice_xmit_xdp_ring() later on. Finally, since it doesn't modify @xdpf anyhow, mark the argument const to save some more (whole -11 bytes of .text! :D). Thanks to 1 jump less and less calcs as well, this yields as many as 6.7 Mpps per queue. `xdp.data_hard_start = xdpf` is fully intentional again (see xdp_convert_buff_to_frame()) and just works when there are no source device's driver issues. Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/bpf/20230210170618.1973430-7-alexandr.lobakin@intel.com
2023-02-13ice: Fix freeing XDP frames backed by Page PoolAlexander Lobakin
As already mentioned, freeing any &xdp_frame via page_frag_free() is wrong, as it assumes the frame is backed by either an order-0 page or a page with no "patrons" behind them, while in fact frames backed by Page Pool can be redirected to a device, which's driver doesn't use it. Keep storing a pointer to the raw buffer and then freeing it unconditionally via page_frag_free() for %XDP_TX frames, but introduce a separate type in the enum for frames coming through .ndo_xdp_xmit(), and free them via xdp_return_frame_bulk(). Note that saving xdpf as xdp_buff->data_hard_start is intentional and is always true when everything is configured properly. After this change, %XDP_REDIRECT from a Page Pool based driver to ice becomes zero-alloc as it should be and horrendous 3.3 Mpps / queue turn into 6.6, hehe. Let it go with no "Fixes:" tag as it spans across good 5+ commits and can't be trivially backported. Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/bpf/20230210170618.1973430-6-alexandr.lobakin@intel.com
2023-02-13ice: Robustify cleaning/completing XDP Tx buffersAlexander Lobakin
When queueing frames from a Page Pool for redirecting to a device backed by the ice driver, `perf top` shows heavy load on page_alloc() and page_frag_free(), despite that on a properly working system it must be fully or at least almost zero-alloc. The problem is in fact a bit deeper and raises from how ice cleans up completed Tx buffers. The story so far: when cleaning/freeing the resources related to a particular completed Tx frame (skbs, DMA mappings etc.), ice uses some heuristics only without setting any type explicitly (except for dummy Flow Director packets, which are marked via ice_tx_buf::tx_flags). This kinda works, but only up to some point. For example, currently ice assumes that each frame coming to __ice_xmit_xdp_ring(), is backed by either plain order-0 page or plain page frag, while it may also be backed by Page Pool or any other possible memory models introduced in future. This means any &xdp_frame must be freed properly via xdp_return_frame() family with no assumptions. In order to do that, the whole heuristics must be replaced with setting the Tx buffer/frame type explicitly, just how it's always been done via an enum. Let us reuse 16 bits from ::tx_flags -- 1 bit-and instr won't hurt much -- especially given that sometimes there was a check for %ICE_TX_FLAGS_DUMMY_PKT, which is now turned from a flag to an enum member. The rest of the changes is straightforward and most of it is just a conversion to rely now on the type set in &ice_tx_buf rather than to some secondary properties. For now, no functional changes intended, the change only prepares the ground for starting freeing XDP frames properly next step. And it must be done atomically/synchronously to not break stuff. Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/bpf/20230210170618.1973430-5-alexandr.lobakin@intel.com
2023-02-13ice: Remove two impossible branches on XDP Tx cleaningAlexander Lobakin
The tagged commit started sending %XDP_TX frames from XSk Rx ring directly without converting it to an &xdp_frame. However, when XSk is enabled on a queue pair, it has its separate Tx cleaning functions, so neither ice_clean_xdp_irq() nor ice_unmap_and_free_tx_buf() ever happens there. Remove impossible branches in order to reduce the diffstat of the upcoming change. Fixes: a24b4c6e9aab ("ice: xsk: Do not convert to buff to frame for XDP_TX") Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/bpf/20230210170618.1973430-4-alexandr.lobakin@intel.com
2023-02-13ice: Fix XDP Tx ring overrunAlexander Lobakin
Sometimes, under heavy XDP Tx traffic, e.g. when using XDP traffic generator (%BPF_F_TEST_XDP_LIVE_FRAMES), the machine can catch OOM due to the driver not freeing all of the pages passed to it by .ndo_xdp_xmit(). Turned out that during the development of the tagged commit, the check, which ensures that we have a free descriptor to queue a frame, moved into the branch happening only when a buffer has frags. Otherwise, we only run a cleaning cycle, but don't check anything. ATST, there can be situations when the driver gets new frames to send, but there are no buffers that can be cleaned/completed and the ring has no free slots. It's very rare, but still possible (> 6.5 Mpps per ring). The driver then fills the next buffer/descriptor, effectively overwriting the data, which still needs to be freed. Restore the check after the cleaning routine to make sure there is a slot to queue a new frame. When there are frags, there still will be a separate check that we can place all of them, but if the ring is full, there's no point in wasting any more time. (minor: make `!ready_frames` unlikely since it happens ~1-2 times per billion of frames) Fixes: 3246a10752a7 ("ice: Add support for XDP multi-buffer on Tx side") Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/bpf/20230210170618.1973430-3-alexandr.lobakin@intel.com
2023-02-13ice: fix ice_tx_ring:: Xdp_tx_active underflowAlexander Lobakin
xdp_tx_active is used to indicate whether an XDP ring has any %XDP_TX frames queued to shortcut processing Tx cleaning for XSk-enabled queues. When !XSk, it simply indicates whether the ring has any queued frames in general. It gets increased on each frame placed onto the ring and counts the whole frame, not each frag. However, currently it gets decremented in ice_clean_xdp_tx_buf(), which is called per each buffer, i.e. per each frag. Thus, on completing multi-frag frames, an underflow happens. Move the decrement to the outer function and do it once per frame, not buf. Also, do that on the stack and update the ring counter after the loop is done to save several cycles. XSk rings are fine since there are no frags at the moment. Fixes: 3246a10752a7 ("ice: Add support for XDP multi-buffer on Tx side") Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/bpf/20230210170618.1973430-2-alexandr.lobakin@intel.com
2023-02-13Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for v6.3. Major changes: ath12k * new driver for Qualcomm Wi-Fi 7 devices ath11k * IPQ5018 support * Fine Timing Measurement (FTM) responder role support * channel 177 support ath10k * store WLAN firmware version in SMEM image table
2023-02-13ice: Fix check for weight and priority of a scheduling nodeMichal Wilczynski
Currently checks for weight and priority ranges don't check incoming value from the devlink. Instead it checks node current weight or priority. This makes those checks useless. Change range checks in ice_set_object_tx_priority() and ice_set_object_tx_weight() to check against incoming priority an weight. Fixes: 42c2eb6b1f43 ("ice: Implement devlink-rate API") Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-13wifi: zd1211rw: remove redundant declsTom Rix
building with W=2 has these errors redundant redeclaration of ‘zd_rf_generic_patch_6m’ [-Werror=redundant-decls] redundant redeclaration of ‘zd_rf_patch_6m_band_edge’ [-Werror=redundant-decls] Remove the second decls. Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230204200902.1709343-1-trix@redhat.com
2023-02-13wifi: rtl8xxxu: fix txdw7 assignment of TX DESC v3Ping-Ke Shih
Type of txdw7 is __le16, so assign __le32 is wrong. Also, the TXDESC_ANTENNA_SELECT_C is defined for __le32, so shift 16 bits to fit the value. Compile test only. sparse warnings: (new ones prefixed by >>) >> rtl8xxxu_core.c:5198:24: sparse: sparse: invalid assignment: |= >> rtl8xxxu_core.c:5198:24: sparse: left side has type restricted __le16 >> rtl8xxxu_core.c:5198:24: sparse: right side has type restricted __le32 Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Tested-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230119113146.9640-1-pkshih@realtek.com
2023-02-13wifi: rtl8xxxu: Add LED control code for RTL8723AUBitterblue Smith
By default the LED will blink when there is some activity. This is only compile tested. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/73323811-aa58-a1be-7867-a5d45b7ae3d6@gmail.com
2023-02-13wifi: rtl8xxxu: Add LED control code for RTL8192EUBitterblue Smith
By default the LED will blink when there is some activity. This was tested with a cheap "HT-WR813" from Aliexpress. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/8f7fd5d7-5baa-b38b-ad2a-977dcd9edd81@gmail.com
2023-02-13wifi: rtl8xxxu: Add LED control code for RTL8188EUBitterblue Smith
By default the LED will blink when there is some activity. This was tested with a TP-Link TL-WN725N. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/34d62bf5-3595-0c77-2ca7-be78555f765d@gmail.com
2023-02-13wifi: rtl8xxxu: Register the LED and make it blinkBitterblue Smith
If the chip can have an LED, register a struct led_classdev and enable hardware-controlled blinking. When the chip is not transmitting or receiving anything the LED is off. Otherwise the LED will blink faster or slower according to the throughput. The LED can be controlled from userspace by writing 0, 1, or 2 to /sys/class/leds/rtl8xxxu-usbX-Y/brightness: 0 - solid off. 1 - solid on. 2 - hardware-controlled blinking. In this patch none of the chips advertise having an LED. That will be added in the next patches. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/b8235bca-60c3-d0fe-a958-53c6dd3ba3f6@gmail.com
2023-02-13wifi: rsi: Avoid defines prefixed with CONFIGPeter Lafreniere
Macros prefixed with CONFIG_ are intended to be defined only by Kconfig scripts. Here we remove the prefix from the CONFIG_AUTO_READ_MODE define to avoid confusion when reading the code. This causes no change to functionality. Signed-off-by: Peter Lafreniere <peter@n8pjl.ca> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230118185353.2422-1-peter@n8pjl.ca
2023-02-13wifi: rtw89: phy: set TX power according to RF path number by chipZong-Zhe Yang
Previously, all supported chips had two RF paths. Therefore, these codes used static number for TX power setting. Now, we are planning to support a new chip which has only one RF path. So, we refine the setting codes to refer to chip's RF path number at runtime. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230203065157.8227-1-pkshih@realtek.com
2023-02-13wifi: rtw89: 8852b: correct register mask name of TX power offsetPing-Ke Shih
For a packet with 1SS rate, it can also transmit via 2 antenna, called 2T mode. For 2T TX power offset, mask should be 2T as well. Fortunately, the mask of 2T and 1T are the same, so it can still work well without this fix. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230203064907.8046-1-pkshih@realtek.com
2023-02-13wifi: rtw89: use passed channel in set_tx_shape_dfir()Zong-Zhe Yang
In path of setting channel and setting TX power, the rtw89_chan instance to be used is controlled by top and passed down. The set_tx_shape_dfir() is in path of setting TX power, so it should use the passed rtw89_chan instead of querying it itself. Otherwise, it might encounter mismatch between parameters if multi-channel. For example, rtw89_8852ce 0000:04:00.0: set tx shape dfir by unknown ch: 155 on 2GHz Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230201032057.7349-1-pkshih@realtek.com
2023-02-13wifi: rtw89: 8852be: enable CLKREQ of PCI capabilityChin-Yen Lee
Enable CLKREQ to reduce power consumption for 8852BE. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230126112715.5811-1-pkshih@realtek.com
2023-02-13wifi: rtw89: 8852b: try to use NORMAL_CE type firmware firstPing-Ke Shih
New firmware type NORMAL_CE is introduced to support P2P-PS and hardware scan, but no LPS-PG mode. After this patch, old firmware with NORMAL type can still work well. The use of this new type is the same as before, so we add new type to avoid taking wrong firmware. Then, driver log can also give clear information about this change: rtw89_8852be 0000:03:00.0: Firmware version 0.29.26.0, cmd version 0, type 5 rtw89_8852be 0000:03:00.0: Firmware version 0.29.26.0, cmd version 0, type 3 Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230123065401.14174-7-pkshih@realtek.com
2023-02-13wifi: rtw89: 8852b: don't support LPS-PG mode after firmware 0.29.26.0Ping-Ke Shih
Due to firmware size limit of 8852b, LPS-PG mode isn't supported after 0.29.26.0, and then we have more space to support other features, such as P2P-PS, hardware scan and so on. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230123065401.14174-6-pkshih@realtek.com
2023-02-13wifi: rtw89: 8852b: reset IDMEM mode to default valuePing-Ke Shih
For different firmware type, it could use different IDMEM mode, so reset it to default to avoid encountering error during we bisect firmware version, like rtw89_8852be 0000:03:00.0: Firmware version 0.29.26.0, cmd version 0, type 5 rtw89_8852be 0000:03:00.0: Firmware version 0.29.26.0, cmd version 0, type 3 rtw89_8852be 0000:03:00.0: fw security fail rtw89_8852be 0000:03:00.0: download firmware fail rtw89_8852be 0000:03:00.0: [ERR]fwdl 0x1E0 = 0x62 rtw89_8852be 0000:03:00.0: [ERR]fwdl 0x83F2 = 0x8 rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb8931154 rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb8931154 rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb8931150 rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb8931154 Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230123065401.14174-5-pkshih@realtek.com
2023-02-13wifi: rtw89: add use of pkt_list offload to debug entryPing-Ke Shih
Driver can prepare pkt_list for firmware that only uses them to send out the packets in specific situations. To understand the usage of current status, and to check if there is leakage problem, dump bitmap and the indices used by certain function. An example looks like: map: ... pkt_ofld: 3f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ... [SCAN 0]: 3 [SCAN 1]: 4 [SCAN 3]: 5 VIF [0] xx:xx:xx:xx:xx:xx ... pkt_ofld[GENERAL]: 0 1 2 Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230123065401.14174-4-pkshih@realtek.com
2023-02-13wifi: rtw89: refine packet offload flowChin-Yen Lee
For upcoming firmware, driver needs to do packet offload to firmware to ensure LPS protocol work properly, so we update current connection and disconnect flow to maintain packet offload flow, and integrate with current WoWLAN flow which also needs packet offload. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230123065401.14174-3-pkshih@realtek.com
2023-02-13wifi: rtw89: fix potential wrong mapping for pkt-offloadChin-Yen Lee
When driver fails to send H2C to firmware for pkt-offload, we should not update the pkt_list of driver, and need to release allocated pkt index to avoid wrong mapping between driver and firmware. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230123065401.14174-2-pkshih@realtek.com
2023-02-13wifi: rtw89: disallow enter PS mode after create TDLS linkKuan-Chung Chen
Buffer STA on TDLS links are not currently supported. Therefore, it is not allowed to enter the PS mode after TDLS link is established. Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230119064631.66971-1-pkshih@realtek.com
2023-02-13selftests/bpf: Fix out-of-srctree buildIlya Leoshkevich
Building BPF selftests out of srctree fails with: make: *** No rule to make target '/linux-build//ima_setup.sh', needed by 'ima_setup.sh'. Stop. The culprit is the rule that defines convenient shorthands like "make test_progs", which builds $(OUTPUT)/test_progs. These shorthands make sense only for binaries that are built though; scripts that live in the source tree do not end up in $(OUTPUT). Therefore drop $(TEST_PROGS) and $(TEST_PROGS_EXTENDED) from the rule. The issue exists for a while, but it became a problem only after commit d68ae4982cb7 ("selftests/bpf: Install all required files to run selftests"), which added dependencies on these scripts. Fixes: 03dcb78460c2 ("selftests/bpf: Add simple per-test targets to Makefile") Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20230208231211.283606-1-iii@linux.ibm.com
2023-02-13wifi: rtw89: refine MCC C2H debug logsZong-Zhe Yang
To debug channel concurrency more centrally, we add a new debug flag, RTW89_DBG_CHAN, for channel related things, especially channel concurrency. Then, we change MCC (multi-channel concurrency) C2H (chip to host packets) debug flag to it. Besides, refine debug logs to show TSF in u64 directly. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230119064342.65391-2-pkshih@realtek.com
2023-02-13wifi: rtw89: fix parsing offset for MCC C2HZong-Zhe Yang
A 8-byte offset is missed during parsing C2Hs (chip to host packets) of MCC (multi-channel concurrent) series. So, we fix it. Fixes: ef9dff4cb491 ("wifi: rtw89: mac: process MCC related C2H") Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230119064342.65391-1-pkshih@realtek.com
generated by cgit (git 2.34.1) at 2025-09-14 20:13:23 +0000