summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-03-11regulator: max1586: Use DIV_ROUND_UP macro to calculate selectorAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-11regulator: ad5398: Use DIV_ROUND_UP macro to calculate selectorAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-11regulator: Add a pointer to aat2870_data in struct aat2870_regulatorAxel Lin
The reason we add *pdev in struct aat2870_regulator is to use it to get a pointer to struct aat2870_data. Save a pointer to struct aat2870_data instead of pdev in struct aat2870_regulator, this change makes the intention more clear. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Jin Park <jinyoungp@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-11regulator: Simplify the code to get selector in isl6271a_set_voltageAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-11regulator: Kill max8998_get_ldo functionAxel Lin
Use rdev_get_id() directly. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-11regulator: Kill max8997_get_rid functionAxel Lin
Use rdev_get_id() directly. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-11regulator: Fix n_voltage settings for pcf50633 regulatorAxel Lin
Current code has off-by-one n_voltage settings for AUTO/DOWN*/LDO* regulators. Take ldo1 as example: n_voltage should be (3.6 - 0.9) / 0.1 + 1 = 28 Table 76. LDO1OUT - LDO1 output voltage select register (address 2Dh) bit description[1] Bit Symbol Access Description 4:0 ldo1_out R/W VO(prog) = 0.9 + ldo1_out × 0.1 V (max 3.6V); e.g. 00000 : 0.9 V 00001 : 1.0 V 11000 : 3.3 V 11011 : 3.6 V 11111 : 3.6 V The n_voltage settings for HCLDO and MEMLDO are also wrong. n_voltage for HCLDO and MEMLDO should be (3.6 - 0.9) / 0.1 + 1 = 28 Table 88. HCLDOOUT - HCLDO output voltage select register (addr. 39h) bit description[1] Bit Symbol Access Description 4:0 hcldo_out R/W VO(prog) = 0.9 + hcldo_out × 0.1 V (max 3.6 V); e.g. 00000 : 0.9 V 00001 : 1.0 V 11011 : 3.6 V 11111 : 3.6 V Table 62. MEMLDOOUT - MEMLDO o/p voltage select reg. (address 26h) bit description[1] Bit Symbol Access Description 4:0 memldo_out R/W VO(prog) = 0.9 + memldo_out × 0.1 V; e.g. 00000: 0.9 V 00001: 1.0 V 11000 : 3.3 V 11011 : 3.6 V 11111 : 3.6 V Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-11regulator: Fix the logic of s5m8767_set_voltage_time_selAxel Lin
This patch includes below fixes: 1. The mask variable is not used at all here, remove it. 2. We already have the new_sel and old_sel, simply returns the delay by: DIV_ROUND_UP(desc->step * (new_sel - old_sel), s5m8767->ramp_delay); Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-11regulator: mc13783: bail out without platform dataSascha Hauer
the platform data pointer is used without checking it. Bail out in the driver instead of crashing the kernel. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-11regulator: Convert ab8499 to use get_voltage_sel()Axel Lin
This change is required to make ab8500_regulator_get_voltage_sel work. The regulator core will call set_voltage_time_sel only when get_voltage_sel is implemented. Signed-off-by: Axel Lin <axel.lin@gmail.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-11regulator: Sort Kconfig and Makefile entriesAxel Lin
Sort Kconfig entries by company name/driver in alphabetical order. Sort Makefile entries by alphabetical order. In order to group all the Kconfig entries by company name, this patch also adds company name to some Kconfig entries. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-11regulator: Fix module desciption for tps65910 regulatorAxel Lin
Fix the module desciption and also update Kconfig to include supporting tps65911 chip. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-11regulator: tps65910: Correct VIO voltage configurationLaxman Dewangan
The VIO regulator register specify the voltage configuration on bit3:2 of its register. And hence only these bits should be modified when setting voltage and used when reading voltage from register setting. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-11regulator: wm8994: Convert to devm_kzalloc()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-11regulator: tps62360: Remove pointless test for unsigned less than zeroAxel Lin
The variable 'selector' is a 'unsigned int', so it can never be less than zero. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-11regulator: s5m8767: Fix unused variable warning in probe()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Sangbeom Kim <sbkim73@samsung.com>
2012-03-11regulator: da9052: Ensure the selected voltage falls within the specified rangeAxel Lin
Integer division may truncate the result, use DIV_ROUND_UP to ensure the selected voltage falls within the specified range. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-11regulator: Set n_voltages for da9052 regulatorsAxel Lin
The n_voltages setting for all LDOs and DCDCs are missing in current code. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-11regulator: Fix setting selector in tps6524x set_voltage functionAxel Lin
Don't assign the voltage to selector. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-03-11mfd: twl-core: regulator configuration for twl6030 V1V8, V2V1 SMPSPeter Ujfalusi
To be able to attach consumers to these supplies from board files we need to have regulator_init_data for them. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-11regulator: twl-regulator: Add fixed LDO for V1V8, V2V1 supplyPeter Ujfalusi
V1V8 supply most common use is to provide VIO for the system. V2V1 supply is used on SDP4430/PandaBoards to provide 2.1V to twl6040, and also as an input to VCXIO_IN, VDAC_IN of twl6030. Also update the bindings documentation with the new compatible property for these additional LDOs. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-11regulator: twl: adapt twl-regulator driver to dtRajendra Nayak
Modify the twl regulator driver to extract the regulator_init_data from device tree when passed, instead of getting it through platform_data structures (on non-DT builds) Also add documentation for TWL regulator specific bindings. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-11regulator: twl6030: add support for vdd1, vdd2 and vdd3 regulatorsTero Kristo
vdd1 and vdd2 are now common regulators for twl4030 and twl6030. Also added vdd3 as a new regulator for twl6030. twl6030 vdd1...vdd3 smps regulator voltages can only be controlled through the smartreflex voltage channel, thus the support for the voltage_get and set is minimal and requires external controller. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-11regulator: twl4030: add support for external voltage get/setTero Kristo
This is needed for SMPS regulators, which use the OMAP voltage processor for voltage get/set functions instead of the normal I2C channel. For this purpose, regulator_init_data->driver_data contents are expanded, it is now a struct which contains function pointers for the set/get voltage operations, a data pointer for these, and the previously used features bitmask. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> [for the MFD part] Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-11regulator: twl6030: Fix voltage selection logicLaxman Dewangan
The voltage selection logic for the twl6030 smps fails if min:max is such that min < 1300mV and max > 1300mV although this is in valid range for a regulator e.g. [x, 1350] where x < 1300. Fixing the voltage selection logic such that first it will check for min_uV for a range and then calculated value will be checked against max_uV. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-10spi: release lock on error path in spi_pump_messages()Dan Carpenter
We should release the lock here and enable IRQs before returning. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> [grant.likely: move unlock above dev_err() call] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-03-11batman-adv: Remove spaces after a castSven Eckelmann
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-03-11batman-adv: Use {} braces consistent on the arms of a statementSven Eckelmann
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-03-11batman-adv: Don't begin block comments with only a /* lineSven Eckelmann
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-03-11batman-adv: Ignore 80-chars per line limits for stringsSven Eckelmann
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-03-10restore smp_mb() in unlock_new_inode()Al Viro
wait_on_inode() doesn't have ->i_lock Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-03-10vfs: fix return value from do_last()Miklos Szeredi
complete_walk() returns either ECHILD or ESTALE. do_last() turns this into ECHILD unconditionally. If not in RCU mode, this error will reach userspace which is complete nonsense. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> CC: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-03-10vfs: fix double put after complete_walk()Miklos Szeredi
complete_walk() already puts nd->path, no need to do it again at cleanup time. This would result in Oopses if triggered, apparently the codepath is not too well exercised. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> CC: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-03-10Linux 3.3-rc7v3.3-rc7Linus Torvalds
2012-03-10r8169: stop using net_device.{base_addr, irq}.Francois Romieu
The driver does not need this leftover of the ISA drivers era. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com>
2012-03-10r8169: move rtl_cfg_info closer to its caller.Francois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com>
2012-03-10r8169: move the netpoll handler after the irq handler.Francois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com>
2012-03-10r8169: move rtl8169_open after rtl_task it depends on.Francois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com>
2012-03-10r8169: move rtl_set_rx_mode before its rtl_hw_start callers.Francois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com>
2012-03-10r8169: move net_device_ops beyond the methods it references.Francois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com>
2012-03-10r8169: move the driver probe method to the end of the driver file.Francois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com>
2012-03-10r8169: move the driver removal method to the end of the driver file.Francois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com>
2012-03-10udf: Fix deadlock in udf_release_file()Jan Kara
udf_release_file() can be called from munmap() path with mmap_sem held. Thus we cannot take i_mutex there because that ranks above mmap_sem. Luckily, i_mutex is not needed in udf_release_file() anymore since protection by i_data_sem is enough to protect from races with write and truncate. Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Reviewed-by: Namjae Jeon <linkinjeon@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-03-10vfs: Correctly set the dir i_mutex lockdep classTyler Hicks
9a7aa12f3911853a introduced additional logic around setting the i_mutex lockdep class for directory inodes. The idea was that some filesystems may want their own special lockdep class for different directory inodes and calling unlock_new_inode() should not clobber one of those special classes. I believe that the added conditional, around the *negated* return value of lockdep_match_class(), caused directory inodes to be placed in the wrong lockdep class. inode_init_always() sets the i_mutex lockdep class with i_mutex_key for all inodes. If the filesystem did not change the class during inode initialization, then the conditional mentioned above was false and the directory inode was incorrectly left in the non-directory lockdep class. If the filesystem did set a special lockdep class, then the conditional mentioned above was true and that class was clobbered with i_mutex_dir_key. This patch removes the negation from the conditional so that the i_mutex lockdep class is properly set for directory inodes. Special classes are preserved and directory inodes with unmodified classes are set with i_mutex_dir_key. Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-03-09net: powerpc: remove the legacy iSeries ethernet driverStephen Rothwell
This driver is specific to the PowerPC legcay iSeries platform which is being removed. Cc: David Miller <davem@davemloft.net> Cc: <netdev@vger.kernel.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-03-09spi: Compatibility with direction which is used in samsung DMA operationKyoungil Kim
I found that there are two kind of direction type. First one is dma_data_direction defined in include/linux/dma-direction.h. It is used for parameter of dma_map/unmap_single in spi-s3c64xx. The other one is dma_transter_direction defined in include/linux/dmaengine.h. It is used for direction of samsung DMA operation (arch/arm/plat-samsung/dma-ops.c). This patch is just some changes to use direction defines which is used in samsung DMA operation. Signed-off-by: Boojin Kim <boojin.kim@samsung.com> Signed-off-by: Kyoungil Kim <ki0351.kim@samsung.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-03-09spi-topcliff-pch: add recovery processing in case wait-event timeoutTomoya MORINAGA
Currently, pch_spi_start_transfer failure is not anticipated. This patch adds the processing. Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-03-09spi-topcliff-pch: supports a spi mode setup and bit order setup by IO controlTomoya MORINAGA
This patch supports a spi mode setup and bit order setup by IO control. spi mode: mode 0 to mode 3 bit order: LSB first, MSB first Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-03-09spi-topcliff-pch: Fix issue for transmitting over 4KByteTomoya MORINAGA
Currently, when spi-topcliff-pch receives transmit request over 4KByte, this driver can't process correctly. This driver needs to divide the data into 4Kbyte unit. This patch fixes the issue. Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-03-09aio: fix the "too late munmap()" raceAl Viro
Current code has put_ioctx() called asynchronously from aio_fput_routine(); that's done *after* we have killed the request that used to pin ioctx, so there's nothing to stop io_destroy() waiting in wait_for_all_aios() from progressing. As the result, we can end up with async call of put_ioctx() being the last one and possibly happening during exit_mmap() or elf_core_dump(), neither of which expects stray munmap() being done to them... We do need to prevent _freeing_ ioctx until aio_fput_routine() is done with that, but that's all we care about - neither io_destroy() nor exit_aio() will progress past wait_for_all_aios() until aio_fput_routine() does really_put_req(), so the ioctx teardown won't be done until then and we don't care about the contents of ioctx past that point. Since actual freeing of these suckers is RCU-delayed, we don't need to bump ioctx refcount when request goes into list for async removal. All we need is rcu_read_lock held just over the ->ctx_lock-protected area in aio_fput_routine(). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Acked-by: Benjamin LaHaise <bcrl@kvack.org> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit (git 2.34.1) at 2025-09-22 17:33:16 +0000