| Age | Commit message (Collapse) | Author |
|---|
|
So far `DevresInner` is kept alive, even if `Devres` is dropped until
the devres callback is executed to avoid a WARN() when the action has
been released already.
With the introduction of devm_remove_action_nowarn() we can remove the
action in `Devres::drop`, handle the case where the action has been
released already and hence also free `DevresInner`.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250107122609.8135-2-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
devm_remove_action() warns if the action to remove does not exist
(anymore).
The Rust devres abstraction, however, has a use-case to call
devm_remove_action() at a point where it can't be guaranteed that the
corresponding action hasn't been released yet.
In particular, an instance of `Devres<T>` may be dropped after the
action has been released. So far, `Devres<T>` worked around this by
keeping the inner type alive.
Hence, add devm_remove_action_nowarn(), which returns an error code if
the action has been removed already.
A subsequent patch uses devm_remove_action_nowarn() to remove the action
when `Devres<T>` is dropped.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250107122609.8135-1-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
disable cdx bus when bus shutdown is called.
Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com>
Link: https://lore.kernel.org/r/20241203084409.2747897-2-abhijit.gangurde@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This commit reintroduces interrupt-based card detection previously
used in the rts5139 driver. This functionality was removed in commit
00d8521dcd23 ("staging: remove rts5139 driver code").
Reintroducing this mechanism fixes presence detection for certain card
readers, which with the current driver, will taken approximately 20
seconds to enter S3 as `mmc_rescan` has to be frozen.
Fixes: 00d8521dcd23 ("staging: remove rts5139 driver code")
Cc: stable@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Link: https://lore.kernel.org/r/20241119085815.11769-1-sean@starlabs.systems
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
class_compat_[create|remove]_link
After 7e722083fcc3 ("i2c: Remove I2C_COMPAT config symbol and related
code") there's no caller left passing a non-null device_link argument.
So remove this argument to simplify the code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/db49131d-fd79-4f23-93f2-0ab541a345fa@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since commit d492cc2573a0 ("driver core: device.h: make struct
bus_type a const *"), the driver core can properly handle constant
struct bus_type, move the ecard_bus_type variable to be a constant
structure as well, placing it into read-only memory which can not be
modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240823081444.150976-1-kunwu.chan@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This field duplicate the LO_FLAGS_DIRECT_IO flag in lo_flags. Remove it
to have a single source of truth about using direct I/O.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250110073750.1582447-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
All callers of loop_update_dio except for loop_configure already have the
queue frozen, and loop_configure works on an unbound device. Remove the
superfluous recursive freezing in loop_update_dio and add asserts for the
locking and freezing state instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250110073750.1582447-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Unlike all other calls of (__)loop_update_dio, loop_set_status never
looks at the O_DIRECT flag of the backing file, and thus doesn't
re-enable direct I/O on an O_DIRECT backing file if e.g. the new block
size would allow it. Fix that and remove the need for the separate
__loop_update_dio flag.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250110073750.1582447-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
loop_set_dio is different from the other (__)loop_update_dio callers in
that it doesn't take any implicit conditions into account and wants to
update the direct I/O flag to the user passed in value and fail if that
can't be done.
Open code the logic here to prepare for simplifying the other direct I/O
flag updates and to make the error handling less convoluted.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250110073750.1582447-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is no point in doing an fdatasync to write out pages when switching
away from direct I/O, as there won't be any. The writeback is only
needed when switching to direct I/O, which would have to invalidate the
pagecache less efficiently from the I/O path.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250110073750.1582447-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Factor out a part of __loop_update_dio in preparation for further
refactoring.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250110073750.1582447-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The concept of transfers is gone since commit 47e9624616c8 ("block:
remove support for cryptoloop and the xor transfer").
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250110073750.1582447-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
While loop_configure simplify assigns the flags passed in by userspace,
loop_set_status only looks at the two changeable flags, and currently
has to do a complicate dance to implement that.
Move assign lo->lo_flags out of loop_set_status_from_info into the
callers and thus drastically simplify the lo_flags handling in
loop_set_status.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250110073750.1582447-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.13
A collection of device specific fixes that came in over the holidays,
plus a MAINTAINERS update and some documentation to help users debug
problems with some of the Cirrus CODECs found in modern laptops.
|
|
Match the locking order used by the core block code by only freezing
the queue after taking the limits lock using the
queue_limits_commit_update_frozen helper and document the callers that
do not freeze the queue at all.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Replace loop_reconfigure_limits with a slightly less encompassing
loop_update_limits that expects the caller to acquire and commit the
queue limits to prepare for sorting out the freeze vs limits lock
ordering.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Match the locking order used by the core block code by only freezing
the queue after taking the limits lock using the
queue_limits_commit_update_frozen helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Match the locking order used by the core block code by only freezing
the queue after taking the limits lock using the
queue_limits_commit_update_frozen helper.
This also allows removes the need for the separate __nbd_set_size helper,
so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Match the locking order used by the core block code by only freezing
the queue after taking the limits lock.
Unlike most queue updates this does not use the
queue_limits_commit_update_frozen helper as the nvme driver want the
queue frozen for more than just the limits update.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
queue_attr_store() always freezes a device queue before calling the
attribute store operation. For attributes that control queue limits, the
store operation will also lock the queue limits with a call to
queue_limits_start_update(). However, some drivers (e.g. SCSI sd) may
need to issue commands to a device to obtain limit values from the
hardware with the queue limits locked. This creates a potential ABBA
deadlock situation if a user attempts to modify a limit (thus freezing
the device queue) while the device driver starts a revalidation of the
device queue limits.
Avoid such deadlock by not freezing the queue before calling the
->store_limit() method in struct queue_sysfs_entry and instead use the
queue_limits_commit_update_frozen helper to freeze the queue after taking
the limits lock.
This also removes taking the sysfs lock for the store_limit method as
it doesn't protect anything here, but creates even more nesting.
Hopefully it will go away from the actual sysfs methods entirely soon.
(commit log adapted from a similar patch from Damien Le Moal)
Fixes: ff956a3be95b ("block: use queue_limits_commit_update in queue_discard_max_store")
Fixes: 0327ca9d53bf ("block: use queue_limits_commit_update in queue_max_sectors_store")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
De-duplicate the code for updating queue limits by adding a store_limit
method that allows having common code handle the actual queue limits
update.
Note that this is a pure refactoring patch and does not address the
existing freeze vs limits lock order problem in the refactored code,
which will be addressed next.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When __blk_mq_update_nr_hw_queues changes the number of tag sets, it
might have to disable poll queues. Currently it does so by adjusting
the BLK_FEAT_POLL, which is a bit against the intent of features that
describe hardware / driver capabilities, but more importantly causes
nasty lock order problems with the broadly held freeze when updating the
number of hardware queues and the limits lock. Fix this by leaving
BLK_FEAT_POLL alone, and instead check for the number of poll queues in
the bio submission and poll handlers. While this adds extra work to the
fast path, the variables are in cache lines used by these operations
anyway, so it should be cheap enough.
Fixes: 8023e144f9d6 ("block: move the poll flag to queue_limits")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Otherwise feature reconfiguration can race with I/O submission.
Also drop the bio_clear_polled in the error path, as the flag does not
matter for instant error completions, it is a left over from when we
allowed polled I/O to proceed unpolled in this case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a helper that freezes the queue, updates the queue limits and
unfreezes the queue and convert all open coded versions of that to the
new helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
queue_limits_commit_update is the function that needs to operate on a
frozen queue, not queue_limits_start_update. Update the kerneldoc
comments to reflect that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The following two APIs are for finding child device, and both only have
one line code in function body.
device_find_child_by_name()
device_find_any_child()
Move them to header as static inline function.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250105-class_fix-v6-8-3a2f1768d4d4@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There are several for_each APIs which has parameter with type below:
int (*fn)(struct device *dev, void *data)
They iterate over various device lists and call @fn() for each device
with caller provided data @*data, and they usually need to modify @*data.
Give the type an dedicated typedef with advantages shown below:
typedef int (*device_iter_t)(struct device *dev, void *data)
- Shorter API declarations and definitions
- Prevent further for_each APIs from using bad parameter type
So introduce device_iter_t and apply it to various existing APIs below:
bus_for_each_dev()
(class|driver)_for_each_device()
device_for_each_child(_reverse|_reverse_from)().
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250105-class_fix-v6-7-3a2f1768d4d4@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For API device_for_each_child_reverse_from(..., const void *data,
int (*fn)(struct device *dev, const void *data))
- Type of @data is const pointer, and means caller's data @*data is not
allowed to be modified, but that usually is not proper for such non
finding device iterating API.
- Types for both @data and @fn are not consistent with all other
for_each device iterating APIs device_for_each_child(_reverse)(),
bus_for_each_dev() and (driver|class)_for_each_device().
Correct its prototype by removing const from parameter types, then adapt
for various existing usages.
An dedicated typedef device_iter_t will be introduced as @fn() type for
various for_each device interating APIs later.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250105-class_fix-v6-6-3a2f1768d4d4@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
device_for_each_child_reverse_from()
device_for_each_child_reverse_from() checks (!parent->p) for its
parameter @parent, and that is not consistent with other APIs of
its cluster as shown below:
device_for_each_child_reverse_from() // check (!parent->p)
device_for_each_child_reverse() // check (!parent || !parent->p)
device_for_each_child() // same above
device_find_child() // same above
Correct the API's parameter @parent check by (!parent || !parent->p).
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250105-class_fix-v6-5-3a2f1768d4d4@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
cluster
For APIs:
device_find_child()
device_for_each_child()
device_for_each_child_reverse()
Their declaration has parameter name 'dev', but their defination
changes the name to 'parent'.
Rename declaration name to defination 'parent' to make both have
the same name.
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250105-class_fix-v6-4-3a2f1768d4d4@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For bus_find_device(), driver_find_device(), and device_find_child(), all
of their function body have pattern below:
{
struct klist_iter i;
struct device *dev;
...
while ((dev = next_device(&i)))
if (match(dev, data) && get_device(dev))
break;
...
}
The expression 'get_device(dev)' in the if condition always returns true
since @dev != NULL.
Move the expression to if body to make logic of these APIs more clearer.
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250105-class_fix-v6-3-3a2f1768d4d4@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
blkcg_fill_root_iostats() iterates over @block_class's devices by
class_dev_iter_(init|next)(), but does not end iterating with
class_dev_iter_exit(), so causes the class's subsystem refcount leakage.
Fix by ending the iterating with class_dev_iter_exit().
Fixes: ef45fe470e1e ("blk-cgroup: show global disk stats in root cgroup io.stat")
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250105-class_fix-v6-2-3a2f1768d4d4@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There are a potential wild pointer dereferences issue regarding APIs
class_dev_iter_(init|next|exit)(), as explained by below typical usage:
// All members of @iter are wild pointers.
struct class_dev_iter iter;
// class_dev_iter_init(@iter, @class, ...) checks parameter @class for
// potential class_to_subsys() error, and it returns void type and does
// not initialize its output parameter @iter, so caller can not detect
// the error and continues to invoke class_dev_iter_next(@iter) even if
// @iter still contains wild pointers.
class_dev_iter_init(&iter, ...);
// Dereference these wild pointers in @iter here once suffer the error.
while (dev = class_dev_iter_next(&iter)) { ... };
// Also dereference these wild pointers here.
class_dev_iter_exit(&iter);
Actually, all callers of these APIs have such usage pattern in kernel tree.
Fix by:
- Initialize output parameter @iter by memset() in class_dev_iter_init()
and give callers prompt by pr_crit() for the error.
- Check if @iter is valid in class_dev_iter_next().
Fixes: 7b884b7f24b4 ("driver core: class.c: convert to only use class_to_subsys")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250105-class_fix-v6-1-3a2f1768d4d4@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since commit aed65af1cc2f ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move all the
device_type variables used in the bus to be constant structures as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo.marliere@suse.com>
Link: https://lore.kernel.org/r/20240904-class_cleanup-fsl-mc-bus-v2-1-83fa25cbdc68@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The information passed as request tgid and pid is actually the
client id of the process. This client id is used as an
identifier by DSP to identify the DSP PD corresponding to the
process. Currently process tgid is getting passed as the
identifier which is getting replaced by a custom client id.
Rename the data which uses this client id.
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20250110134308.123739-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Memory intensive applications(which requires more tha 4GB) that wants
to offload tasks to DSP might have to split the tasks to multiple
user PD to make the resources available.
For every call to DSP, fastrpc driver passes the process tgid which
works as an identifier for the DSP to enqueue the tasks to specific PD.
With current design, if any process opens device node more than once
and makes PD init request, same tgid will be passed to DSP which will
be considered a bad request and this will result in failure as the same
identifier cannot be used for multiple DSP PD.
Assign and pass a client ID to DSP which would be assigned during device
open and will be dependent on the index of session allocated for the PD.
This will allow the same process to open the device more than once and
spawn multiple dynamic PD for ease of processing.
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20250110134308.123739-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently, 'unsigned long' is used for intermediate variables when
calculating CRCs.
The size of 'long' differs depending on the architecture: it is 32 bits
on 32-bit architectures and 64 bits on 64-bit architectures.
The CRC values generated by genksyms represent the compatibility of
exported symbols. Therefore, reproducibility is important. In other
words, we need to ensure that the output is the same when the kernel
source is identical, regardless of whether genksyms is running on a
32-bit or 64-bit build machine.
Fortunately, the output from genksyms is not affected by the build
machine's architecture because only the lower 32 bits of the
'unsigned long' variables are used.
To make it even clearer that the CRC calculation is independent of
the build machine's architecture, this commit explicitly uses the
fixed-width type, uint32_t.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Use macros provided by hashtable.h
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
free_list() must be called before returning from this for-loop.
Swap 'break' and the combination of free_list() and 'return'.
This reduces the code and minimizes the risk of introducing memory
leaks in future changes.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
To improve readability, reduce the indentation as follows:
- Use 'continue' earlier when the symbol does not match
- flip !sym->is_declared to flatten the if-else chain
No functional changes are intended.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
When a symbol that is already registered is read again from *.symref
file, __add_symbol() removes the previous one from the hash table without
freeing it.
[Test Case]
$ cat foo.c
#include <linux/export.h>
void foo(void);
void foo(void) {}
EXPORT_SYMBOL(foo);
$ cat foo.symref
foo void foo ( void )
foo void foo ( void )
When a symbol is removed from the hash table, it must be freed along
with its ->name and ->defn members. However, sym->name cannot be freed
because it is sometimes shared with node->string, but not always. If
sym->name and node->string share the same memory, free(sym->name) could
lead to a double-free bug.
To resolve this issue, always assign a strdup'ed string to sym->name.
Fixes: 64e6c1e12372 ("genksyms: track symbol checksum changes")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
When a symbol that is already registered is added again, __add_symbol()
returns without freeing the symbol definition, making it unreachable.
The following test cases demonstrate different memory leak points.
[Test Case 1]
Forward declaration with exactly the same definition
$ cat foo.c
#include <linux/export.h>
void foo(void);
void foo(void) {}
EXPORT_SYMBOL(foo);
[Test Case 2]
Forward declaration with a different definition (e.g. attribute)
$ cat foo.c
#include <linux/export.h>
void foo(void);
__attribute__((__section__(".ref.text"))) void foo(void) {}
EXPORT_SYMBOL(foo);
[Test Case 3]
Preserving an overridden symbol (compile with KBUILD_PRESERVE=1)
$ cat foo.c
#include <linux/export.h>
void foo(void);
void foo(void) { }
EXPORT_SYMBOL(foo);
$ cat foo.symref
override foo void foo ( int )
The memory leaks in Test Case 1 and 2 have existed since the introduction
of genksyms into the kernel tree. [1]
The memory leak in Test Case 3 was introduced by commit 5dae9a550a74
("genksyms: allow to ignore symbol checksum changes").
When multiple init_declarators are reduced to an init_declarator_list,
the decl_spec must be duplicated. Otherwise, the following Test Case 4
would result in a double-free bug.
[Test Case 4]
$ cat foo.c
#include <linux/export.h>
extern int foo, bar;
int foo, bar;
EXPORT_SYMBOL(foo);
In this case, 'foo' and 'bar' share the same decl_spec, 'int'. It must
be unshared before being passed to add_symbol().
[1]: https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/commit/?id=46bd1da672d66ccd8a639d3c1f8a166048cca608
Fixes: 5dae9a550a74 ("genksyms: allow to ignore symbol checksum changes")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
I do not think the '#' flag is useful here because adding the explicit
'0x' is clearer. Add the '0' flag to zero-pad the CRC values.
This change gives better alignment in the generated *.mod.c files.
There is no impact to the compiled modules.
[Before]
$ grep -A5 modversion_info fs/efivarfs/efivarfs.mod.c
static const struct modversion_info ____versions[]
__used __section("__versions") = {
{ 0x907d14d, "blocking_notifier_chain_register" },
{ 0x53d3b64, "simple_inode_init_ts" },
{ 0x65487097, "__x86_indirect_thunk_rax" },
{ 0x122c3a7e, "_printk" },
[After]
$ grep -A5 modversion_info fs/efivarfs/efivarfs.mod.c
static const struct modversion_info ____versions[]
__used __section("__versions") = {
{ 0x0907d14d, "blocking_notifier_chain_register" },
{ 0x053d3b64, "simple_inode_init_ts" },
{ 0x65487097, "__x86_indirect_thunk_rax" },
{ 0x122c3a7e, "_printk" },
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Commit 71810db27c1c ("modversions: treat symbol CRCs as 32 bit
quantities") changed the CRC fields to s32 because the __kcrctab and
__kcrctab_gpl sections contained relative references to the actual
CRC values stored in the .rodata section when CONFIG_MODULE_REL_CRCS=y.
Commit 7b4537199a4a ("kbuild: link symbol CRCs at final link, removing
CONFIG_MODULE_REL_CRCS") removed this complexity. Now, the __kcrctab
and __kcrctab_gpl sections directly contain the CRC values in all cases.
The genksyms tool outputs unsigned 32-bit CRC values, so u32 is preferred
over s32.
No functional changes are intended.
Regardless of this change, the CRC value is assigned to the u32 variable
'crcval' before the comparison, as seen in kernel/module/version.c:
crcval = *crc;
It was previously mandatory (but now optional) in order to avoid sign
extension because the following line previously compared 'unsigned long'
and 's32':
if (versions[i].crc == crcval)
return 1;
versions[i].crc is still 'unsigned long' for backward compatibility.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
|
|
A QString constructed from a character literal of length 0, i.e. "", is not
"null" for historical reasons. This does not matter here so use the preferred
method isEmpty() instead.
Also directly construct empty QString objects instead of passing in an empty
character literal that has to be parsed into an empty object first.
Signed-off-by: Rolf Eike Beer <eb@emlix.com>
Link: https://doc.qt.io/qt-6/qstring.html#distinction-between-null-and-empty-strings
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Symptom:
The command
find ... | xargs ... perl -i
occasionally triggers error messages like the following, with the build
still succeeding:
Can't open <redacted>/kernel/.tmp_dir/include/dt-bindings/clock/XXNX4nW9: No such file or directory.
Analysis:
With strace, the root cause has been identified to be `perl -i` creating
temporary files inside ${tmpdir}, which causes `find` to see the
temporary files and emit the names. `find` is likely implemented with
readdir. POSIX `readdir` says:
If a file is removed from or added to the directory after the most
recent call to opendir() or rewinddir(), whether a subsequent call
to readdir() returns an entry for that file is unspecified.
So if the libc that `find` links against choose to return that entry
in readdir(), a possible sequence of events is the following:
1. find emits foo.h
2. xargs executes `perl -i foo.h`
3. perl (pid=100) creates temporary file `XXXXXXXX`
4. find sees file `XXXXXXXX` and emit it
5. PID 100 exits, cleaning up the temporary file `XXXXXXXX`
6. xargs executes `perl -i XXXXXXXX`
7. perl (pid=200) tries to read the file, but it doesn't exist any more.
... triggering the error message.
One can reproduce the bug with the following command (assuming PWD
contains the list of headers in kheaders.tar.xz)
for i in $(seq 100); do
find -type f -print0 |
xargs -0 -P8 -n1 perl -pi -e 'BEGIN {undef $/;}; s/\/\*((?!SPDX).)*?\*\///smg;';
done
With a `find` linking against musl libc, the error message is emitted
6/100 times.
The fix:
This change stores the results of `find` before feeding them into xargs.
find and xargs will no longer be able to see temporary files that perl
creates after this change.
Signed-off-by: HONG Yifan <elsk@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The 'cpio' command is used solely for copying header files to the
temporary directory. However, there is no strong reason to use 'cpio'
for this purpose. For example, scripts/package/install-extmod-build
uses the 'tar' command to copy files.
This commit replaces the use of 'cpio' with 'tar' because 'tar' is
already used in this script to generate kheaders_data.tar.xz anyway.
Performance-wide, there is no significant difference between 'cpio'
and 'tar'.
[Before]
$ rm -fr kheaders; mkdir kheaders
$ time sh -c '
for f in include arch/x86/include
do
find "$f" -name "*.h"
done | cpio --quiet -pd kheaders
'
real 0m0.148s
user 0m0.021s
sys 0m0.140s
[After]
$ rm -fr kheaders; mkdir kheaders
$ time sh -c '
for f in include arch/x86/include
do
find "$f" -name "*.h"
done | tar -c -f - -T - | tar -xf - -C kheaders
'
real 0m0.098s
user 0m0.024s
sys 0m0.131s
Revert commit 69ef0920bdd3 ("Docs: Add cpio requirement to changes.rst")
because 'cpio' is not used anywhere else during the kernel build.
Please note that the built-in initramfs is created by the in-tree tool,
usr/gen_init_cpio, so it does not rely on the external 'cpio' command
at all.
Remove 'cpio' from the package build dependencies as well.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The next commit will get rid of the use of 'cpio' command, as there is
no strong reason to use it just for copying files.
Before that, this commit renames the 'cpio_dir' variable to 'tmpdir'.
No functional changes are intended.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Exclude include/generated/{utsversion.h,autoconf.h} by using the -path
option to reduce the cost of forking new processes.
No functional changes are intended.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
