| Age | Commit message (Collapse) | Author |
|---|
|
For tcp_yeah, use an ssthresh floor of 2, the same floor used by Reno
and CUBIC, per RFC 5681 (equation 4).
tcp_yeah_ssthresh() was sometimes returning a 0 or negative ssthresh
value if the intended reduction is as big or bigger than the current
cwnd. Congestion control modules should never return a zero or
negative ssthresh. A zero ssthresh generally results in a zero cwnd,
causing the connection to stall. A negative ssthresh value will be
interpreted as a u32 and will set a target cwnd for PRR near 4
billion.
Oleksandr Natalenko reported that a system using tcp_yeah with ECN
could see a warning about a prior_cwnd of 0 in
tcp_cwnd_reduction(). Testing verified that this was due to
tcp_yeah_ssthresh() misbehaving in this way.
Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
All hists test cases forget to reset err after using it to hold an
error code. If error occure in setup_fake_machine() it incorrectly
return TEST_OK.
This patch fixes it.
Suggested-and-Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1452520124-2073-13-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Commit 71d6de64fedd ("perf test: Fix hist testcases when kptr_restrict is on")
solves a double free problem when 'perf test hist' calling
setup_fake_machine(). However, the result is still incorrect. For example:
$ ./perf test -v 'filtering hist entries'
25: Test filtering hist entries :
--- start ---
test child forked, pid 4186
Cannot create kernel maps
test child finished with 0
---- end ----
Test filtering hist entries: Ok
In this case the body of this test is not get executed at all, but the
result is 'Ok'.
Actually, in setup_fake_machine() there's no need to create real kernel
maps. What we want are the fake maps. This patch removes the
machine__create_kernel_maps() in setup_fake_machine(), so it won't be
affected by kptr_restrict setting.
Test result:
$ cat /proc/sys/kernel/kptr_restrict
1
$ ~/perf test -v hist
15: Test matching and linking multiple hists :
--- start ---
test child forked, pid 24031
test child finished with 0
---- end ----
Test matching and linking multiple hists: Ok
[SNIP]
Suggested-and-Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1452520124-2073-12-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The test-all.c file doesn't check BPF related features. For an
environment with all other features enabled, BPF would be considered
enabled without doing real feature check.
This patch adds test-bpf.c into test-all.c.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1452520124-2073-11-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
perf build is currently (v4.4-rc5) broken on powerpc:
bpf.c:28:4: error: #error __NR_bpf not defined. libbpf does not support
your arch.
# error __NR_bpf not defined. libbpf does not support your arch.
^
Fix this by including tools/scripts/Makefile.arch for the proper $ARCH
macro. While at it, remove redundant LP64 macro definition.
Also, since libbpf require $(srctree) now, detect the path of srctree
like perf.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1452520124-2073-10-git-send-email-wangnan0@huawei.com
[Use tools/scripts/Makefile.arch]
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
After this patch other directories can use this architecture detector
without directly including it from perf's directory. Libbpf would
utilize it to get proper $(ARCH) so it can receive correct uapi include
directory.
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1452520124-2073-8-git-send-email-wangnan0@huawei.com
[ Add missing srctree definition in tests/make ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@kernel.org>
|
|
Checks BPF syscall number, turn off libbpf building on platform doesn't
correctly support sys_bpf instead of blocking compiling.
Reported-and-Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1452520124-2073-7-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"So we have a laundry list of locking subsystem changes:
- continuing barrier API and code improvements
- futex enhancements
- atomics API improvements
- pvqspinlock enhancements: in particular lock stealing and adaptive
spinning
- qspinlock micro-enhancements"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Allow FUTEX_CLOCK_REALTIME with FUTEX_WAIT op
futex: Cleanup the goto confusion in requeue_pi()
futex: Remove pointless put_pi_state calls in requeue()
futex: Document pi_state refcounting in requeue code
futex: Rename free_pi_state() to put_pi_state()
futex: Drop refcount if requeue_pi() acquired the rtmutex
locking/barriers, arch: Remove ambiguous statement in the smp_store_mb() documentation
lcoking/barriers, arch: Use smp barriers in smp_store_release()
locking/cmpxchg, arch: Remove tas() definitions
locking/pvqspinlock: Queue node adaptive spinning
locking/pvqspinlock: Allow limited lock stealing
locking/pvqspinlock: Collect slowpath lock statistics
sched/core, locking: Document Program-Order guarantees
locking, sched: Introduce smp_cond_acquire() and use it
locking/pvqspinlock, x86: Optimize the PV unlock code path
locking/qspinlock: Avoid redundant read of next pointer
locking/qspinlock: Prefetch the next node cacheline
locking/qspinlock: Use _acquire/_release() versions of cmpxchg() & xchg()
atomics: Add test for atomic operations with _relaxed variants
|
|
The spew in /proc/net/bonding/bond0 uses netif_carrier_ok() to determine
mii_status, while /sys/class/net/bond0/bonding/mii_status looks at
curr_active_slave, which doesn't actually seem to be set sometimes when
the bond actually is up. A mode 4 bond configured via ifcfg-foo files on a
Red Hat Enterprise Linux system, after boot, comes up clean and
functional, but the sysfs node shows mii_status of down, while proc shows
up. A simple enough fix here seems to be to use the same method for
determining up or down in both places, and I'd opt for the one that seems
to match reality.
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <gospo@cumulusnetworks.com>
CC: netdev@vger.kernel.org
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Dmitry Vyukov reported a use-after-free in the code expanded by the
macro debug_post_sfx, which is caused by the use of the asoc pointer
after it was freed within sctp_side_effect() scope.
This patch fixes it by allowing sctp_side_effect to clear that asoc
pointer when the TCB is freed.
As Vlad explained, we also have to cover the SCTP_DISPOSITION_ABORT case
because it will trigger DELETE_TCB too on that same loop.
Also, there were places issuing SCTP_CMD_INIT_FAILED and ASSOC_FAILED
but returning SCTP_DISPOSITION_CONSUME, which would fool the scheme
above. Fix it by returning SCTP_DISPOSITION_ABORT instead.
The macro is already prepared to handle such NULL pointer.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
make_kernelsrc and make_kernelsrc_tools are skiped if a previous
build-test is done, because 'make build-test' creates two files with
same names. To avoid this, they should be included in .PHONY list.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1452520124-2073-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
On some system the perf-config is broken, causes link failure like this:
/usr/lib64/python2.7/config/libpython2.7.a(posixmodule.o): In function `posix_forkpty':
/opt/wangnan/yocto-build/tmp-eglibc/work/x86_64-oe-linux/python/2.7.3-r0.3.1/Python-2.7.3/./Modules/posixmodule.c:3816: undefined reference to `forkpty'
/usr/lib64/python2.7/config/libpython2.7.a(posixmodule.o): In function `posix_openpty':
/opt/wangnan/yocto-build/tmp-eglibc/work/x86_64-oe-linux/python/2.7.3-r0.3.1/Python-2.7.3/./Modules/posixmodule.c:3756: undefined reference to `openpty'
collect2: error: ld returned 1 exit status
make[1]: *** [/home/wangnan/kernel-hydrogen/tools/perf/out/perf] Error 1
make: *** [all] Error 2
$ python-config --libs
-lpthread -ldl -lpthread -lutil -lm -lpython2.7
In this case a '-lutil' should be appended to -lpython2.7.
(I know we have --start-group and --end-group. I can see them in command
line of collect2 by strace. However it doesn't work. Seems I have a
broken environment?)
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1452520124-2073-2-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The vt8500 clocksource driver declares itself as capable to handle the
minimum delay of 4 cycles by passing the value into
clockevents_config_and_register(). The vt8500_timer_set_next_event()
requires the passed cycles value to be at least 16. The impact is that
userspace hangs in nanosleep() calls with small delay intervals.
This problem is reproducible in Linux 4.2 starting from:
c6eb3f70d448 ('hrtimer: Get rid of hrtimer softirq')
From Russell King, more detailed explanation:
"It's a speciality of the StrongARM/PXA hardware. It takes a certain
number of OSCR cycles for the value written to hit the compare registers.
So, if a very small delta is written (eg, the compare register is written
with a value of OSCR + 1), the OSCR will have incremented past this value
before it hits the underlying hardware. The result is, that you end up
waiting a very long time for the OSCR to wrap before the event fires.
So, we introduce a check in set_next_event() to detect this and return
-ETIME if the calculated delta is too small, which causes the generic
clockevents code to retry after adding the min_delta specified in
clockevents_config_and_register() to the current time value.
min_delta must be sufficient that we don't re-trip the -ETIME check - if
we do, we will return -ETIME, forward the next event time, try to set it,
return -ETIME again, and basically lock the system up. So, min_delta
must be larger than the check inside set_next_event(). A factor of two
was chosen to ensure that this situation would never occur.
The PXA code worked on PXA systems for years, and I'd suggest no one
changes this mechanism without access to a wide range of PXA systems,
otherwise they're risking breakage."
Cc: stable@vger.kernel.org
Cc: Russell King <linux@arm.linux.org.uk>
Acked-by: Alexey Charkov <alchark@gmail.com>
Signed-off-by: Roman Volkov <rvolkov@v1ros.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
"The changes in this cycle were:
- Adding transitivity uniformly to rcu_node structure ->lock
acquisitions. (This is implemented by the first two commits on top
of v4.4-rc2 due to the pervasive nature of this change.)
- Documentation updates, including RCU requirements.
- Expedited grace-period changes.
- Miscellaneous fixes.
- Linked-list fixes, courtesy of KTSAN.
- Torture-test updates.
- Late-breaking fix to sysrq-generated crash.
One thing I should note is that these pieces of documentation are
fairly large files:
.../RCU/Design/Requirements/Requirements.html | 2897 ++++++++++++++++++++
.../RCU/Design/Requirements/Requirements.htmlx | 2741 ++++++++++++++++++
and are written in HTML, not the usual .txt style. I hope they are
fine"
Paul McKenney explains the html docs:
"For whatever it is worth, the reason for this unconventional choice
was that attempts to do the diagrams in ASCII art failed miserably.
And attempts to do ASCII art for the upcoming documentation of the
data structures failed even more miserably"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (49 commits)
sysrq: Fix warning in sysrq generated crash.
list: Add lockless list traversal primitives
rcu: Make rcu_gp_init() be bool rather than int
rcu: Move wakeup out from under rnp->lock
rcu: Fix comment for rcu_dereference_raw_notrace
rcu: Don't redundantly disable irqs in rcu_irq_{enter,exit}()
rcu: Make cpu_needs_another_gp() be bool
rcu: Eliminate unused rcu_init_one() argument
rcu: Remove TINY_RCU bloat from pointless boot parameters
torture: Place console.log files correctly from the get-go
torture: Abbreviate console error dump
rcutorture: Print symbolic name for ->gp_state
rcutorture: Print symbolic name for rcu_torture_writer_state
rcutorture: Remove CONFIG_RCU_USER_QS from rcutorture selftest doc
rcutorture: Default grace period to three minutes, allow override
rcutorture: Dump stack when GP kthread stalls
rcutorture: Flag nonexistent RCU GP kthread
rcutorture: Add batch number to script printout
Documentation/memory-barriers.txt: Fix ACCESS_ONCE thinko
documentation: Update RCU requirements based on expedited changes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs xattr updates from Al Viro:
"Andreas' xattr cleanup series.
It's a followup to his xattr work that went in last cycle; -0.5KLoC"
* 'work.xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
xattr handlers: Simplify list operation
ocfs2: Replace list xattr handler operations
nfs: Move call to security_inode_listsecurity into nfs_listxattr
xfs: Change how listxattr generates synthetic attributes
tmpfs: listxattr should include POSIX ACL xattrs
tmpfs: Use xattr handler infrastructure
btrfs: Use xattr handler infrastructure
vfs: Distinguish between full xattr names and proper prefixes
posix acls: Remove duplicate xattr name definitions
gfs2: Remove gfs2_xattr_acl_chmod
vfs: Remove vfs_xattr_cmp
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs RCU symlink updates from Al Viro:
"Replacement of ->follow_link/->put_link, allowing to stay in RCU mode
even if the symlink is not an embedded one.
No changes since the mailbomb on Jan 1"
* 'work.symlinks' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
switch ->get_link() to delayed_call, kill ->put_link()
kill free_page_put_link()
teach nfs_get_link() to work in RCU mode
teach proc_self_get_link()/proc_thread_self_get_link() to work in RCU mode
teach shmem_get_link() to work in RCU mode
teach page_get_link() to work in RCU mode
replace ->follow_link() with new method that could stay in RCU mode
don't put symlink bodies in pagecache into highmem
namei: page_getlink() and page_follow_link_light() are the same thing
ufs: get rid of ->setattr() for symlinks
udf: don't duplicate page_symlink_inode_operations
logfs: don't duplicate page_symlink_inode_operations
switch befs long symlinks to page_symlink_operations
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs compat_ioctl fixes from Al Viro:
"This is basically Jann's patches from last week. I have _not_
included the stuff like switching i2c to ->compat_ioctl() into this
one - those need more testing.
Ideally I would like fs/compat_ioctl.c shrunk a lot, but that's a
separate story"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
compat_ioctl: don't call do_ioctl under set_fs(KERNEL_DS)
compat_ioctl: don't pass fd around when not needed
compat_ioctl: don't look up the fd twice
|
|
|
|
When we do dquot readahead in log recovery, we do not use a verifier
as the underlying buffer may not have dquots in it. e.g. the
allocation operation hasn't yet been replayed. Hence we do not want
to fail recovery because we detect an operation to be replayed has
not been run yet. This problem was addressed for inodes in commit
d891400 ("xfs: inode buffers may not be valid during recovery
readahead") but the problem was not recognised to exist for dquots
and their buffers as the dquot readahead did not have a verifier.
The result of not using a verifier is that when the buffer is then
next read to replay a dquot modification, the dquot buffer verifier
will only be attached to the buffer if *readahead is not complete*.
Hence we can read the buffer, replay the dquot changes and then add
it to the delwri submission list without it having a verifier
attached to it. This then generates warnings in xfs_buf_ioapply(),
which catches and warns about this case.
Fix this and make it handle the same readahead verifier error cases
as for inode buffers by adding a new readahead verifier that has a
write operation as well as a read operation that marks the buffer as
not done if any corruption is detected. Also make sure we don't run
readahead if the dquot buffer has been marked as cancelled by
recovery.
This will result in readahead either succeeding and the buffer
having a valid write verifier, or readahead failing and the buffer
state requiring the subsequent read to resubmit the IO with the new
verifier. In either case, this will result in the buffer always
ending up with a valid write verifier on it.
Note: we also need to fix the inode buffer readahead error handling
to mark the buffer with EIO. Brian noticed the code I copied from
there wrong during review, so fix it at the same time. Add comments
linking the two functions that handle readahead verifier errors
together so we don't forget this behavioural link in future.
cc: <stable@vger.kernel.org> # 3.12 - current
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
When we do inode readahead in log recovery, we do can do the
readahead before we've replayed the icreate transaction that stamps
the buffer with inode cores. The inode readahead verifier catches
this and marks the buffer as !done to indicate that it doesn't yet
contain valid inodes.
In adding buffer error notification (i.e. setting b_error = -EIO at
the same time as as we clear the done flag) to such a readahead
verifier failure, we can then get subsequent inode recovery failing
with this error:
XFS (dm-0): metadata I/O error: block 0xa00060 ("xlog_recover_do..(read#2)") error 5 numblks 32
This occurs when readahead completion races with icreate item replay
such as:
inode readahead
find buffer
lock buffer
submit RA io
....
icreate recovery
xfs_trans_get_buffer
find buffer
lock buffer
<blocks on RA completion>
.....
<ra completion>
fails verifier
clear XBF_DONE
set bp->b_error = -EIO
release and unlock buffer
<icreate gains lock>
icreate initialises buffer
marks buffer as done
adds buffer to delayed write queue
releases buffer
At this point, we have an initialised inode buffer that is up to
date but has an -EIO state registered against it. When we finally
get to recovering an inode in that buffer:
inode item recovery
xfs_trans_read_buffer
find buffer
lock buffer
sees XBF_DONE is set, returns buffer
sees bp->b_error is set
fail log recovery!
Essentially, we need xfs_trans_get_buf_map() to clear the error status of
the buffer when doing a lookup. This function returns uninitialised
buffers, so the buffer returned can not be in an error state and
none of the code that uses this function expects b_error to be set
on return. Indeed, there is an ASSERT(!bp->b_error); in the
transaction case in xfs_trans_get_buf_map() that would have caught
this if log recovery used transactions....
This patch firstly changes the inode readahead failure to set -EIO
on the buffer, and secondly changes xfs_buf_get_map() to never
return a buffer with an error state set so this first change doesn't
cause unexpected log recovery failures.
cc: <stable@vger.kernel.org> # 3.12 - current
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
Select CLKSRC_MMIO when FSL_FTM_TIMER is enabled. Otherwise it fails to
compile on i386 with COMPILE_TEST=y.
"
on i386:
when CLKSRC_MMIO is not enabled:
drivers/built-in.o: In function `ftm_timer_init':
fsl_ftm_timer.c:(.init.text+0x6842): undefined reference to `clocksource_mmio_readl_up'
fsl_ftm_timer.c:(.init.text+0x6855): undefined reference to `clocksource_mmio_init'
"
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Not every arch has io memory.
So, unbreak the build by fixing the dependencies.
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
and 'spi/topic/zynq' into spi-next
|
|
'spi/topic/s3c64xx', 'spi/topic/sh-msiof' and 'spi/topic/spidev' into spi-next
|
|
'spi/topic/mtk' and 'spi/topic/omap2-mcspi' into spi-next
|
|
'spi/topic/fsl-espi' and 'spi/topic/imx' into spi-next
|
|
'spi/topic/cadence' and 'spi/topic/davinci' into spi-next
|
|
|
|
|
|
|
|
Adding missing bitmap.[ch] sources to the MANIFEST file. Fixes building
'make perf-*-src-pkg' generated tarballs.
Reported-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fixes: 915b0882c310 ("tools lib: Move bitmap.[ch] from tools/perf/ to tools/{lib,include}/")
Link: http://lkml.kernel.org/r/1452509693-13452-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add *.cmd files to be removed within clean target.
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1452509693-13452-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add *.cmd files to be removed within clean target.
Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1452509693-13452-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Adding missing clean targets for following tools directories:
lib/bpf
lib/subcmd
build
This are now cleaned via 'make -C tools clean' command.
Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1452509693-13452-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
There are a few discussions left with regards to this ioctl:
1) the name of the new structs will contain _v2_ on it?
2) what's the best alternative to avoid compat32 issues?
Due to that, let's postpone the addition of this new ioctl to
the next Kernel version, to give people more time to discuss it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
While mxl111sf may have multiple frontends, it has just one
tuner. Reflect that on the media graph.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Devices like mxl111sf-based WinTV Aero-m have multiple
frontends, all linked on the same demod. Currently, the
dvb_create_graph() function is not smart enough to create
multiple links. Fix it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Sometimes, it is desired to create 1:n and n:1 or even
n:n links between different entities with the same
function.
This is actually needed to support DVB devices that
have multiple frontends. While we could do a function
like that internally at the DVB core, such function is
generic enough to be at media-entity, and it could be
useful on some other places.
So, add such function.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
We should not remove the media_device until its last usage,
or we may have use after free troubles.
So, move the per-adapter media_device removal to happen at
the end of the adapter removal code.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Several pure digital TV devices have a frontend with the tuner
integrated on it. Add the RF connector when dvb_create_media_graph()
is called on such devices.
Tested with siano and dvb_usb_mxl111sf drivers.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Those functions are used only if CONFIG_MEDIA_CONTROLLER_DVB.
Without that, if !CONFIG_MEDIA_CONTROLLER_DVB, it would produce
two warnings:
drivers/media/dvb-core/dvbdev.c:219:12: warning: 'dvb_create_tsout_entity' defined but not used [-Wunused-function]
static int dvb_create_tsout_entity(struct dvb_device *dvbdev,
^
drivers/media/dvb-core/dvbdev.c:264:12: warning: 'dvb_create_media_entity' defined but not used [-Wunused-function]
static int dvb_create_media_entity(struct dvb_device *dvbdev,
^
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Currently, v4l2_device_register() doesn't use the media_device
struct. So, calling media_device_init() could be called either
before or after v4l2_device_register().
Yet, it is a good practice to initialize everything before calling
the register functions. Also, the other drivers call
media_device_init() before registering the V4L2 device.
So, move the call for media_device_init() to happen earlier on
exynos4-is and s3c-camif.
This is just a cleanup patch.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
While we need to keep a u64 alignment to avoid compat32 issues,
having the number of entities/pads/links/interfaces represented
by an u64 is incoherent with the ID number, with is an u32.
In order to make it coherent, change those quantities to u32.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
media_device_register_entity() is protected by a spin_lock.
Calling ida_pre_get() with GFP_KERNEL may put it to sleep,
with is a bad idea and causes this warning:
[ 8812.397195] BUG: sleeping function called from invalid context at mm/slub.c:1287
[ 8812.397203] in_atomic(): 1, irqs_disabled(): 0, pid: 15179, name: modprobe
[ 8812.397207] INFO: lockdep is turned off.
[ 8812.397213] CPU: 2 PID: 15179 Comm: modprobe Tainted: G B 4.4.0-rc2+ #41
[ 8812.397218] Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0350.2015.0812.1722 08/12/2015
[ 8812.397222] 0000000000000000 ffff880314c77268 ffffffff818f8ba7 ffff8803b17dde00
[ 8812.397232] ffff880314c77290 ffffffff811c2ee5 ffff8803b17dde00 ffffffff8284dbc9
[ 8812.397241] 0000000000000507 ffff880314c772d0 ffffffff811c30d5 0000000041b58ab3
[ 8812.397250] Call Trace:
[ 8812.397258] [<ffffffff818f8ba7>] dump_stack+0x4b/0x64
[ 8812.397265] [<ffffffff811c2ee5>] ___might_sleep+0x245/0x3a0
[ 8812.397270] [<ffffffff811c30d5>] __might_sleep+0x95/0x1a0
[ 8812.397276] [<ffffffff818fd083>] ? ida_pre_get+0x113/0x250
[ 8812.397282] [<ffffffff8153bb77>] kmem_cache_alloc+0x197/0x250
[ 8812.397288] [<ffffffff818fd083>] ida_pre_get+0x113/0x250
[ 8812.397293] [<ffffffff818fd265>] ida_simple_get+0xa5/0x170
[ 8812.397298] [<ffffffff818fd1c0>] ? ida_pre_get+0x250/0x250
[ 8812.397306] [<ffffffffa07382d1>] media_device_register_entity+0x171/0x420 [media]
[ 8812.397318] [<ffffffffa129e76f>] v4l2_device_register_subdev+0x34f/0x640 [videodev]
[ 8812.397324] [<ffffffffa0768dea>] v4l2_i2c_new_subdev_board+0x12a/0x250 [v4l2_common]
[ 8812.397330] [<ffffffffa0768fe7>] v4l2_i2c_new_subdev+0xd7/0x110 [v4l2_common]
[ 8812.397337] [<ffffffffa0768f10>] ? v4l2_i2c_new_subdev_board+0x250/0x250 [v4l2_common]
[ 8812.397347] [<ffffffffa13d2f76>] au0828_card_analog_fe_setup+0x2e6/0x3f0 [au0828]
[ 8812.397352] [<ffffffff814450cc>] ? power_down+0xc4/0xc4
[ 8812.397361] [<ffffffffa13d2c90>] ? au0828_tuner_callback+0x160/0x160 [au0828]
[ 8812.397370] [<ffffffffa13d319f>] au0828_card_setup+0x11f/0x340 [au0828]
[ 8812.397378] [<ffffffffa13d3080>] ? au0828_card_analog_fe_setup+0x3f0/0x3f0 [au0828]
[ 8812.397384] [<ffffffff812a575b>] ? msleep+0x7b/0xc0
[ 8812.397393] [<ffffffffa13d0d79>] au0828_usb_probe+0x679/0xcf0 [au0828]
[ 8812.397399] [<ffffffff81d7619d>] usb_probe_interface+0x45d/0x940
[ 8812.397406] [<ffffffff81ca7004>] driver_probe_device+0x454/0xd90
[ 8812.397411] [<ffffffff81ca7940>] ? driver_probe_device+0xd90/0xd90
[ 8812.397417] [<ffffffff81ca7940>] ? driver_probe_device+0xd90/0xd90
[ 8812.397422] [<ffffffff81ca7a61>] __driver_attach+0x121/0x160
[ 8812.397427] [<ffffffff81ca141f>] bus_for_each_dev+0x11f/0x1a0
[ 8812.397433] [<ffffffff81ca1300>] ? subsys_dev_iter_exit+0x10/0x10
[ 8812.397439] [<ffffffff822917d7>] ? _raw_spin_unlock+0x27/0x40
[ 8812.397445] [<ffffffff81ca5d4d>] driver_attach+0x3d/0x50
[ 8812.397450] [<ffffffff81ca5039>] bus_add_driver+0x4c9/0x770
[ 8812.397456] [<ffffffff81ca944c>] driver_register+0x18c/0x3b0
[ 8812.397462] [<ffffffff8124c952>] ? __raw_spin_lock_init+0x32/0x100
[ 8812.397468] [<ffffffff81d71e58>] usb_register_driver+0x1f8/0x440
[ 8812.397473] [<ffffffffa0208000>] ? 0xffffffffa0208000
[ 8812.397481] [<ffffffffa02080b7>] au0828_init+0xb7/0x1000 [au0828]
[ 8812.397486] [<ffffffff810021b1>] do_one_initcall+0x141/0x300
[ 8812.397492] [<ffffffff81002070>] ? try_to_run_init_process+0x40/0x40
[ 8812.397497] [<ffffffff8123bbf6>] ? trace_hardirqs_on_caller+0x16/0x590
[ 8812.397502] [<ffffffff815406e6>] ? kasan_unpoison_shadow+0x36/0x50
[ 8812.397507] [<ffffffff815406e6>] ? kasan_unpoison_shadow+0x36/0x50
[ 8812.397512] [<ffffffff815406e6>] ? kasan_unpoison_shadow+0x36/0x50
[ 8812.397517] [<ffffffff815407f7>] ? __asan_register_globals+0x87/0xa0
[ 8812.397524] [<ffffffff814454e5>] do_init_module+0x1d0/0x5a4
[ 8812.397530] [<ffffffff812ed7e8>] load_module+0x6648/0x9d70
[ 8812.397535] [<ffffffff812e4b70>] ? symbol_put_addr+0x50/0x50
[ 8812.397546] [<ffffffff812e71a0>] ? module_frob_arch_sections+0x20/0x20
[ 8812.397552] [<ffffffff8158e950>] ? open_exec+0x50/0x50
[ 8812.397559] [<ffffffff811648db>] ? ns_capable+0x5b/0xd0
[ 8812.397565] [<ffffffff812f1208>] SyS_finit_module+0x108/0x130
[ 8812.397571] [<ffffffff812f1100>] ? SyS_init_module+0x1f0/0x1f0
[ 8812.397576] [<ffffffff81004044>] ? lockdep_sys_exit_thunk+0x12/0x14
[ 8812.397582] [<ffffffff82292236>] entry_SYSCALL_64_fastpath+0x16/0x7a
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
The DVB drivers may have 257 PADs. Get the next power of two
that would accomodate that amount.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
There are two ancillary functions that are missing comments.
While those are used only internally at media-entity.c,
document them, for completeness.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Instead of using one u32 counter per type for object IDs, use
just one counter. With such change, it makes sense to simplify
the debug logs too.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Several parameters added by the media_ent_enum patches
were declared with wrong argument names:
include/media/media-device.h:333: warning: No description found for parameter 'entity_internal_idx_max'
include/media/media-device.h:354: warning: No description found for parameter 'ent_enum'
include/media/media-device.h:354: warning: Excess function parameter 'e' description in 'media_entity_enum_init'
include/media/media-device.h:333: warning: No description found for parameter 'entity_internal_idx_max'
include/media/media-device.h:354: warning: No description found for parameter 'ent_enum'
include/media/media-device.h:354: warning: Excess function parameter 'e' description in 'media_entity_enum_init'
include/media/media-entity.h:397: warning: No description found for parameter 'ent_enum'
include/media/media-entity.h:397: warning: Excess function parameter 'e' description in 'media_entity_enum_zero'
include/media/media-entity.h:409: warning: No description found for parameter 'ent_enum'
include/media/media-entity.h:409: warning: Excess function parameter 'e' description in 'media_entity_enum_set'
include/media/media-entity.h:424: warning: No description found for parameter 'ent_enum'
include/media/media-entity.h:424: warning: Excess function parameter 'e' description in 'media_entity_enum_clear'
include/media/media-entity.h:441: warning: No description found for parameter 'ent_enum'
include/media/media-entity.h:441: warning: Excess function parameter 'e' description in 'media_entity_enum_test'
include/media/media-entity.h:458: warning: No description found for parameter 'ent_enum'
include/media/media-entity.h:458: warning: Excess function parameter 'e' description in 'media_entity_enum_test_and_set'
include/media/media-entity.h:474: warning: No description found for parameter 'ent_enum'
include/media/media-entity.h:474: warning: Excess function parameter 'e' description in 'media_entity_enum_empty'
include/media/media-entity.h:474: warning: Excess function parameter 'entity' description in 'media_entity_enum_empty'
include/media/media-entity.h:489: warning: No description found for parameter 'ent_enum1'
include/media/media-entity.h:489: warning: No description found for parameter 'ent_enum2'
include/media/media-entity.h:489: warning: Excess function parameter 'e' description in 'media_entity_enum_intersects'
include/media/media-entity.h:489: warning: Excess function parameter 'f' description in 'media_entity_enum_intersects'
Fix them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
This function was added recently, but weren't documented.
Add documentation for it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Some exported functions were still documented at the .c file,
instead of documenting at the .h one.
Move the documentation to the right place, as we only use headers
at media device-drivers.xml DocBook.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
