summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-07-31ASoC: rsnd: fixup pcm_new callback methodKuninori Morimoto
bff58ea4f43d9b4a9fd6fb05fabc8f50f68131f5 (ASoC: rsnd: add DVC support) added DVC support, and it added pcm_new callback feature for it. Then it called all DAI's pcm_new callback, and it was wrong. This patch fixup it and call correct callback. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-31ASoC: rsnd: add missing dev_dbg() in rsnd_bset()Kuninori Morimoto
b8c637864a6904a9ba8e0df556d5bdf9f26b2c54 (ASoC: rsnd: use regmap_mmio instead of original regmap bus) used regmap_mmio and modified dev_dbg() for rsnd_read/write(). But rsnd_bset() is missing it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-31ASoC: rsnd: care audio local bus data format consistencyKuninori Morimoto
R-Car sound uses Audio Local Bus which uses Lch/Rch format. This bus is used if driver uses BUSIF. But sound data is written as Rch/Lch format in register. This means Rch <-> Lch will be inverted. SSIU :: BUSIF_DALIGN is used to controlling data format. Reported-by: Jun Watanabe <jun.watanabe.ue@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-31ASoC: rsnd: care detail of SRC_BSDSRKuninori Morimoto
Driver should care more detail of SRC_BSDSR settings. The sound includes noise without this patch if it used SRC. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-31spi: davinci: fix to support more than 2 chip selectsMurali Karicheri
Currently, the driver defines SPI_MAX_CHIPSELECT as 2 and use per device array bytes_per_word based on this. This breaks if num_chipselect per device is greater than 2. This patch fix this and allocate memory for this array based on num_chipselect. It's preparation patch to enable GPIO CS feature for Davinci SPI. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-31ASoC: pxa: pxa-ssp: small leak in probe()Dan Carpenter
There is a small memory leak if probe() fails. Fixes: 2023c90c3a2c ('ASoC: pxa: pxa-ssp: add DT bindings') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-31regulator: tps65090: Set voltage for fixed regulatorsJavier Martinez Canillas
According to the tps65090 data manual [0], the DCDC1 and DCDC2 step-down converters and the LDO's have a fixed output voltage. Add this information to the driver since these fixed regulators can be used as parent input supply for switches that don't have an output voltage defined. So the regulator core needs to fetch the FET parent output voltage if the child voltage is queried. [0]: http://www.ti.com/lit/gpn/tps65090 Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-31ASoC: fsl_asrc: fix an error code in fsl_asrc_probe()Dan Carpenter
There is a cut and paste bug so it returns success instead of the error code. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-31ASoC: fsl_asrc: Fix sparse warnings in FSL_ASRC_FORMATS due to typoNicolin Chen
reproduce: make C=1 CF=-D__CHECK_ENDIAN__ sparse warnings: (new ones prefixed by >>) >> sound/soc/fsl/fsl_asrc.c:563:28: sparse: restricted snd_pcm_format_t degrades to integer >> sound/soc/fsl/fsl_asrc.c:570:28: sparse: restricted snd_pcm_format_t degrades to integer vim +563 sound/soc/fsl/fsl_asrc.c 557 .probe = fsl_asrc_dai_probe, 558 .playback = { 559 .stream_name = "ASRC-Playback", 560 .channels_min = 1, 561 .channels_max = 10, 562 .rates = FSL_ASRC_RATES, > 563 .formats = FSL_ASRC_FORMATS, 564 }, 565 .capture = { 566 .stream_name = "ASRC-Capture", 567 .channels_min = 1, 568 .channels_max = 10, 569 .rates = FSL_ASRC_RATES, > 570 .formats = FSL_ASRC_FORMATS, 571 }, 572 .ops = &fsl_asrc_dai_ops, 573 }; Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-31bridge: Don't include NDA_VLAN for FDB entries with vid 0Toshiaki Makita
An FDB entry with vlan_id 0 doesn't mean it is used in vlan 0, but used when vlan_filtering is disabled. There is inconsistency around NDA_VLAN whose payload is 0 - even if we add an entry by RTM_NEWNEIGH without any NDA_VLAN, and even though adding an entry with NDA_VLAN 0 is prohibited, we get an entry with NDA_VLAN 0 by RTM_GETNEIGH. Dumping an FDB entry with vlan_id 0 shouldn't include NDA_VLAN. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-31ASoC: Intel: mfld-pcm: Allocate platform dataSubhransu S. Prusty
Platform data may be null during platform_device_add. Allocate platform data before using. Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-31ASoC: Intel: mfld-pcm: Fix to use correct sst_data pointerSubhransu S. Prusty
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-31netfilter: nf_tables: check for unset NFTA_SET_ELEM_LIST_ELEMENTS attributePablo Neira Ayuso
Otherwise, the kernel oopses in nla_for_each_nested when iterating over the unset attribute NFTA_SET_ELEM_LIST_ELEMENTS in the nf_tables_{new,del}setelem() path. netlink: 65524 bytes leftover after parsing attributes in process `nft'. [...] Oops: 0000 [#1] SMP [...] CPU: 2 PID: 6287 Comm: nft Not tainted 3.16.0-rc2+ #169 RIP: 0010:[<ffffffffa0526e61>] [<ffffffffa0526e61>] nf_tables_newsetelem+0x82/0xec [nf_tables] [...] Call Trace: [<ffffffffa05178c4>] nfnetlink_rcv+0x2e7/0x3d7 [nfnetlink] [<ffffffffa0517939>] ? nfnetlink_rcv+0x35c/0x3d7 [nfnetlink] [<ffffffff8137d300>] netlink_unicast+0xf8/0x17a [<ffffffff8137d6a5>] netlink_sendmsg+0x323/0x351 [...] Fix this by returning -EINVAL if this attribute is not set, which doesn't make sense at all since those commands are there to add and to delete elements from the set. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2014-07-31Revert "irq: Warn when shared interrupts do not match on NO_SUSPEND"Thomas Gleixner
This reverts commit 4fae4e7624653ef498d0e2a38f00620b9701ab04. Undo because it breaks working systems. Requested-by: Rafael J. Wysocki <rjw@rjwysocki.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-07-31Revert "PM / sleep / irq: Do not suspend wakeup interrupts"Thomas Gleixner
This reverts commit d709f7bcbb3ab01704fa7b37a2e4b981cf3783c1. Undo, because it might break exisiting functionality. Requested-by: Rafael J. Wysocki <rjw@rjwysocki.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-07-31Merge branches 'x86/vt-d', 'x86/amd', 'arm/omap', 'ppc/pamu', 'arm/smmu', ↵Joerg Roedel
'arm/exynos' and 'core' into next
2014-07-31devicetree: Add generic IOMMU device tree bindingsThierry Reding
This commit introduces a generic device tree binding for IOMMU devices. Only a very minimal subset is described here, but it is enough to cover the requirements of both the Exynos System MMU and Tegra SMMU as discussed here: https://lkml.org/lkml/2014/4/27/346 Acked-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Olof Johansson <olof@lixom.net> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-07-31bonding: use kobject_put instead of _del after kobject_addVeaceslav Falico
Otherwise the name of the kobject isn't getting freed and other stuff from kobject_cleanup() isn't getting called. kobject_put() will call kobject_del() on its own in kobject_cleanup(). CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-31netfilter: nfnetlink_acct: avoid using NFACCT_F_OVERQUOTA with bit helper ↵Alexey Perevalov
functions Bit helper functions were used for manipulation with NFACCT_F_OVERQUOTA, but they are accepting pit position, but not a bit mask. As a result not a third bit for NFACCT_F_OVERQUOTA was set, but forth. Such behaviour was dangarous and could lead to unexpected overquota report result. Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2014-07-31ASoC: wm9713: Convert to params_width()Mark Brown
The CODEC doesn't care how data is laid out in memory. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-07-31ASoC: wm9081: Convert to params_width()Mark Brown
The CODEC doesn't care how data is laid out in memory. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-07-31ASoC: wm8995: Convert to params_width()Mark Brown
The CODEC doesn't care how data is laid out in memory. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-07-31ASoC: wm8994: Convert to params_width()Mark Brown
The CODEC doesn't care how data is laid out in memory. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-07-31ASoC: wm8993: Convert to params_width()Mark Brown
The CODEC doesn't care how data is laid out in memory. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-07-31ASoC: wm8991: Convert to params_width()Mark Brown
The CODEC doesn't care how data is laid out in memory. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-07-31ASoC: wm8990: Convert to params_width()Mark Brown
The CODEC doesn't care how data is laid out in memory. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-07-31ASoC: wm8988: Convert to params_width()Mark Brown
The CODEC doesn't care how data is laid out in memory. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-07-31ASoC: wm8985: Convert to params_width()Mark Brown
The CODEC doesn't care how data is laid out in memory. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-07-31ASoC: wm8983: Convert to params_width()Mark Brown
The CODEC doesn't care how data is laid out in memory. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-07-31ASoC: wm8978: Convert to params_width()Mark Brown
The CODEC doesn't care how data is laid out in memory. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-07-31ASoC: wm8974: Convert to params_width()Mark Brown
The CODEC doesn't care how data is laid out in memory. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-07-31ASoC: wm8971: Convert to params_width()Mark Brown
The CODEC doesn't care how data is laid out in memory. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-07-31ASoC: wm8962: Convert to params_width()Mark Brown
The CODEC doesn't care how data is laid out in memory. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-07-31ASoC: wm8961: Convert to params_width()Mark Brown
The CODEC doesn't care how data is laid out in memory. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-07-31ASoC: wm8960: Convert to params_width()Mark Brown
The CODEC doesn't care how data is laid out in memory. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-07-31ASoC: wm8955: Convert to params_width()Mark Brown
The CODEC doesn't care how data is laid out in memory. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-07-31ASoC: wm8940: Convert to params_width()Mark Brown
The CODEC doesn't care how data is laid out in memory. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-07-31ASoC: wm8904: Convert to params_width()Mark Brown
The CODEC doesn't care how data is laid out in memory. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-07-31ASoC: wm8903: Convert to params_width()Mark Brown
The CODEC doesn't care how data is laid out in memory. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-07-31ASoC: wm8900: Convert to params_width()Mark Brown
The CODEC doesn't care how data is laid out in memory. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-07-31ASoC: wm8804: Convert to params_width()Mark Brown
The CODEC doesn't care how data is laid out in memory. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-07-31ASoC: wm8770: Convert to params_width()Mark Brown
The CODEC doesn't care how data is laid out in memory. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-07-31ASoC: wm8753: Convert to params_width()Mark Brown
The CODEC doesn't care how data is laid out in memory. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-07-31ASoC: wm8750: Convert to params_width()Mark Brown
The CODEC doesn't care how data is laid out in memory. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-07-31ASoC: wm8741: Convert to params_width()Mark Brown
The CODEC doesn't care how data is laid out in memory. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-07-31ASoC: wm8737: Convert to params_width()Mark Brown
The CODEC doesn't care how data is laid out in memory. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-07-31ASoC: wm8731: Convert to params_width()Mark Brown
The CODEC doesn't care how data is laid out in memory. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-07-31ASoC: wm8728: Convert to params_width()Mark Brown
The CODEC doesn't care how data is laid out in memory. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-07-31ASoC: wm8711: Convert to params_width()Mark Brown
The CODEC doesn't care how data is laid out in memory. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-07-31ASoC: wm8580: Convert to params_width()Mark Brown
The CODEC doesn't care how data is laid out in memory. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
generated by cgit (git 2.34.1) at 2025-09-29 21:23:58 +0000