| Age | Commit message (Collapse) | Author |
|---|
|
Add a new test case which performs double query of the bpf_mprog through
libbpf API, but also via raw bpf(2) syscall. This is testing to gather
first the count and then in a subsequent probe the full information with
the program array without clearing passed structs in between.
# ./vmtest.sh -- ./test_progs -t tc_opts
[...]
./test_progs -t tc_opts
[ 1.398818] tsc: Refined TSC clocksource calibration: 3407.999 MHz
[ 1.400263] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fd336761, max_idle_ns: 440795243819 ns
[ 1.402734] clocksource: Switched to clocksource tsc
[ 1.426639] bpf_testmod: loading out-of-tree module taints kernel.
[ 1.428112] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel
#252 tc_opts_after:OK
#253 tc_opts_append:OK
#254 tc_opts_basic:OK
#255 tc_opts_before:OK
#256 tc_opts_chain_classic:OK
#257 tc_opts_chain_mixed:OK
#258 tc_opts_delete_empty:OK
#259 tc_opts_demixed:OK
#260 tc_opts_detach:OK
#261 tc_opts_detach_after:OK
#262 tc_opts_detach_before:OK
#263 tc_opts_dev_cleanup:OK
#264 tc_opts_invalid:OK
#265 tc_opts_max:OK
#266 tc_opts_mixed:OK
#267 tc_opts_prepend:OK
#268 tc_opts_query:OK <--- (new test)
#269 tc_opts_replace:OK
#270 tc_opts_revision:OK
Summary: 19/0 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20231006220655.1653-4-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
The recently added tcx attachment extended the BPF UAPI for attaching and
detaching by a couple of fields. Those fields are currently only supported
for tcx, other types like cgroups and flow dissector silently ignore the
new fields except for the new flags.
This is problematic once we extend bpf_mprog to older attachment types, since
it's hard to figure out whether the syscall really was successful if the
kernel silently ignores non-zero values.
Explicitly reject non-zero fields relevant to bpf_mprog for attachment types
which don't use the latter yet.
Fixes: e420bed02507 ("bpf: Add fd-based tcx multi-prog infra with link support")
Signed-off-by: Lorenz Bauer <lmb@isovalent.com>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20231006220655.1653-3-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Improve consistency for bpf_mprog_query() API and let the latter also handle
a NULL entry as can be the case for tcx. Instead of returning -ENOENT, we
copy a count of 0 and revision of 1 to user space, so that this can be fed
into a subsequent bpf_mprog_attach() call as expected_revision. A BPF self-
test as part of this series has been added to assert this case.
Suggested-by: Lorenz Bauer <lmb@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20231006220655.1653-2-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
While working on the ebpf-go [0] library integration for bpf_mprog and tcx,
Lorenz noticed that two subsequent BPF_PROG_QUERY requests currently fail. A
typical workflow is to first gather the bpf_mprog count without passing program/
link arrays, followed by the second request which contains the actual array
pointers.
The initial call populates count and revision fields. The second call gets
rejected due to a BPF_PROG_QUERY_LAST_FIELD bug which should point to
query.revision instead of query.link_attach_flags since the former is really
the last member.
It was not noticed in libbpf as bpf_prog_query_opts() always calls bpf(2) with
an on-stack bpf_attr that is memset() each time (and therefore query.revision
was reset to zero).
[0] https://ebpf-go.dev
Fixes: e420bed02507 ("bpf: Add fd-based tcx multi-prog infra with link support")
Reported-by: Lorenz Bauer <lmb@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20231006220655.1653-1-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Exit early if the list is empty.
Some applications using TCP zerocopy are calling
recvmsg( ... MSG_ERRQUEUE) and hit this case quite often,
probably because busy polling only deals with sk_receive_queue.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231005114504.642589-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Yoshihiro Shimoda says:
====================
ravb: Fix use-after-free issues
This patch series fixes use-after-free issues in ravb_remove().
The original patch is made by Zheng Wang [1]. And, I made the patch
1/2 which I found other issue in the ravb_remove().
[1]
https://lore.kernel.org/netdev/20230725030026.1664873-1-zyytlz.wz@163.com/
v1: https://lore.kernel.org/all/20231004091253.4194205-1-yoshihiro.shimoda.uh@renesas.com/
====================
Link: https://lore.kernel.org/r/20231005011201.14368-1-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ravb_stop() should call cancel_work_sync(). Otherwise,
ravb_tx_timeout_work() is possible to use the freed priv after
ravb_remove() was called like below:
CPU0 CPU1
ravb_tx_timeout()
ravb_remove()
unregister_netdev()
free_netdev(ndev)
// free priv
ravb_tx_timeout_work()
// use priv
unregister_netdev() will call .ndo_stop() so that ravb_stop() is
called. And, after phy_stop() is called, netif_carrier_off()
is also called. So that .ndo_tx_timeout() will not be called
after phy_stop().
Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Reported-by: Zheng Wang <zyytlz.wz@163.com>
Closes: https://lore.kernel.org/netdev/20230725030026.1664873-1-zyytlz.wz@163.com/
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20231005011201.14368-3-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In ravb_remove(), dma_free_coherent() should be call after
unregister_netdev(). Otherwise, this controller is possible to use
the freed buffer.
Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20231005011201.14368-2-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.7
The first pull request for v6.7, with both stack and driver changes.
We have a big change how locking is handled in cfg80211 and mac80211
which removes several locks and hopefully simplifies the locking
overall. In drivers rtw89 got MCC support and smaller features to
other active drivers but nothing out of ordinary.
Major changes:
cfg80211
- remove wdev mutex, use the wiphy mutex instead
- annotate iftype_data pointer with sparse
- first kunit tests, for element defrag
- remove unused scan_width support
mac80211
- major locking rework, remove several locks like sta_mtx, key_mtx
etc. and use the wiphy mutex instead
- remove unused shifted rate support
- support antenna control in frame injection (requires driver support)
- convert RX_DROP_UNUSABLE to more detailed reason codes
rtw89
- TDMA-based multi-channel concurrency (MCC) support
iwlwifi
- support set_antenna() operation
- support frame injection antenna control
ath12k
- WCN7850: enable 320 MHz channels in 6 GHz band
- WCN7850: hardware rfkill support
- WCN7850: enable IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS to make scan faster
ath11k
- add chip id board name while searching board-2.bin
* tag 'wireless-next-2023-10-06' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (272 commits)
wifi: rtlwifi: remove unreachable code in rtl92d_dm_check_edca_turbo()
wifi: rtw89: debug: txpwr table supports Wi-Fi 7 chips
wifi: rtw89: debug: show txpwr table according to chip gen
wifi: rtw89: phy: set TX power RU limit according to chip gen
wifi: rtw89: phy: set TX power limit according to chip gen
wifi: rtw89: phy: set TX power offset according to chip gen
wifi: rtw89: phy: set TX power by rate according to chip gen
wifi: rtw89: mac: get TX power control register according to chip gen
wifi: rtlwifi: use unsigned long for rtl_bssid_entry timestamp
wifi: rtlwifi: fix EDCA limit set by BT coexistence
wifi: rt2x00: fix MT7620 low RSSI issue
wifi: rtw89: refine bandwidth 160MHz uplink OFDMA performance
wifi: rtw89: refine uplink trigger based control mechanism
wifi: rtw89: 8851b: update TX power tables to R34
wifi: rtw89: 8852b: update TX power tables to R35
wifi: rtw89: 8852c: update TX power tables to R67
wifi: rtw89: regd: configure Thailand in regulation type
wifi: mac80211: add back SPDX identifier
wifi: mac80211: fix ieee80211_drop_unencrypted_mgmt return type/value
wifi: rtlwifi: cleanup few rtlxxxx_set_hw_reg() routines
...
====================
Link: https://lore.kernel.org/r/87jzrz6bvw.fsf@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
dm-devel@redhat.com has migrated to dm-devel@lists.linux.dev
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
This patch adds the BCM5221 PHY support by reusing brcm_fet_*()
callbacks and adding quirks for BCM5221 when needed.
Cc: Jim Reinhart <jimr@tekvox.com>
Cc: James Autry <jautry@tekvox.com>
Cc: Matthew Maron <matthewm@tekvox.com>
Signed-off-by: Giulio Benetti <giulio.benetti+tekvox@benettiengineering.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231005182915.153815-1-giulio.benetti@benettiengineering.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
i40e: House-keeping and clean-up
Ivan Vecera says:
The series makes some house-keeping tasks on i40e driver:
Patch 1: Removes unnecessary back pointer from i40e_hw
Patch 2: Moves I40E_MASK macro to i40e_register.h where is used
Patch 3: Refactors I40E_MDIO_CLAUSE* to use the common macro
Patch 4: Add header dependencies to <linux/avf/virtchnl.h>
Patch 5: Simplifies memory alloction functions
Patch 6: Moves mem alloc structures to i40e_alloc.h
Patch 7: Splits i40e_osdep.h to i40e_debug.h and i40e_io.h
Patch 8: Removes circular header deps, fixes and cleans headers
Patch 9: Moves DDP specific macros and structs to i40e_ddp.c
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
i40e: Move DDP specific macros and structures to i40e_ddp.c
i40e: Remove circular header dependencies and fix headers
i40e: Split i40e_osdep.h
i40e: Move memory allocation structures to i40e_alloc.h
i40e: Simplify memory allocation functions
virtchnl: Add header dependencies
i40e: Refactor I40E_MDIO_CLAUSE* macros
i40e: Move I40E_MASK macro to i40e_register.h
i40e: Remove back pointer from i40e_hw structure
====================
Link: https://lore.kernel.org/r/20231005162850.3218594-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Devlink health dump get callback should take devlink lock as any other
devlink callback. Otherwise, since devlink_mutex was removed, this
callback is not protected from a race of the reporter being destroyed
while handling the callback.
Add devlink lock to the callback and to any call for
devlink_health_do_dump(). This should be safe as non of the drivers dump
callback implementation takes devlink lock.
As devlink lock is added to any callback of dump, the reporter dump_lock
is now redundant and can be removed.
Fixes: d3efc2a6a6d8 ("net: devlink: remove devlink_mutex")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/1696510216-189379-1-git-send-email-moshe@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
`strncpy` is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We expect netdev->name to be NUL-terminated based on its use with format
strings and dev_info():
| dev_info(&adapter->pdev->dev,
| "%s link is up %d Mbps %s\n",
| netdev->name, adapter->link_speed,
| adapter->link_duplex == FULL_DUPLEX ?
| "full duplex" : "half duplex");
Furthermore, NUL-padding is not required as netdev is already
zero-initialized through alloc_etherdev().
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20231005-strncpy-drivers-net-ethernet-atheros-atlx-atl2-c-v1-1-493f113ebfc7@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
`strncpy` is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
A suitable replacement is `strscpy` [2] due to the fact that it
guarantees NUL-termination on the destination buffer without
unnecessarily NUL-padding.
It should be noted that there doesn't currently exist a bug here as
DRV_NAME is a small string literal which means no overread bugs are
present.
Also to note, other ethernet drivers are using strscpy in a similar
pattern:
| dec/tulip/tulip_core.c
| 861: strscpy(info->driver, DRV_NAME, sizeof(info->driver));
|
| 8390/ax88796.c
| 582: strscpy(info->driver, DRV_NAME, sizeof(info->driver));
|
| dec/tulip/dmfe.c
| 1077: strscpy(info->driver, DRV_NAME, sizeof(info->driver));
|
| 8390/etherh.c
| 558: strscpy(info->driver, DRV_NAME, sizeof(info->driver));
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Lukasz Stelmach <l.stelmach@samsung.com>
Link: https://lore.kernel.org/r/20231005-strncpy-drivers-net-ethernet-asix-ax88796c_ioctl-c-v1-1-6fafdc38b170@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As we don't specify the MTU in the driver, the framework
will fall back to 1500 bytes and this doesn't work very
well when we try to attach a DSA switch:
eth1: mtu greater than device maximum
ixp4xx_eth c800a000.ethernet eth1: error -22 setting
MTU to 1504 to include DSA overhead
After locating an out-of-tree patch in OpenWrt I found
suitable code to set the MTU on the interface and ported
it and updated it. Now the MTU gets set properly.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231005-ixp4xx-eth-mtu-v4-1-08c66ed0bc69@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix a recently introduced hibernation crash (Pavankumar Kondeti)"
* tag 'pm-6.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: hibernate: Fix copying the zero bitmap to safe pages
|
|
Since there's no alternate driver, change this entry from obsolete
to orphan.
Signed-off-by: Harini Katakam <harini.katakam@amd.com>
Link: https://lore.kernel.org/r/20231005131039.25881-1-harini.katakam@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull block fixes from Jens Axboe:
"Just two minor fixes, for nbd and md"
* tag 'block-6.6-2023-10-06' of git://git.kernel.dk/linux:
nbd: don't call blk_mark_disk_dead nbd_clear_sock_ioctl
md/raid5: release batch_last before waiting for another stripe_head
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2023-10-05
The first patch is by Miquel Raynal and fixes a comment in the sja1000
driver.
Vincent Mailhol contributes 2 patches that fix W=1 compiler warnings
in the etas_es58x driver.
Jiapeng Chong's patch removes an unneeded NULL pointer check before
dev_put() in the CAN raw protocol.
A patch by Justin Stittreplaces a strncpy() by strscpy() in the
peak_pci sja1000 driver.
The next 5 patches are by me and fix the can_restart() handler and
replace BUG_ON()s in the CAN dev helpers with proper error handling.
The last 27 patches are also by me and target the at91_can driver.
First a new helper function is introduced, the at91_can driver is
cleaned up and updated to use the rx-offload helper.
* tag 'linux-can-next-for-6.7-20231005' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (37 commits)
can: at91_can: switch to rx-offload implementation
can: at91_can: at91_alloc_can_err_skb() introduce new function
can: at91_can: at91_irq_err_line(): send error counters with state change
can: at91_can: at91_irq_err_line(): make use of can_change_state() and can_bus_off()
can: at91_can: at91_irq_err_line(): take reg_sr into account for bus off
can: at91_can: at91_irq_err_line(): make use of can_state_get_by_berr_counter()
can: at91_can: at91_irq_err(): rename to at91_irq_err_line()
can: at91_can: at91_irq_err_frame(): move next to at91_irq_err()
can: at91_can: at91_irq_err_frame(): call directly from IRQ handler
can: at91_can: at91_poll_err(): increase stats even if no quota left or OOM
can: at91_can: at91_poll_err(): fold in at91_poll_err_frame()
can: at91_can: add CAN transceiver support
can: at91_can: at91_open(): forward request_irq()'s return value in case or an error
can: at91_can: at91_chip_start(): don't disable IRQs twice
can: at91_can: at91_set_bittiming(): demote register output to debug level
can: at91_can: rename struct at91_priv::{tx_next,tx_echo} to {tx_head,tx_tail}
can: at91_can: at91_setup_mailboxes(): update comments
can: at91_can: add more register definitions
can: at91_can: MCR Register: convert to FIELD_PREP()
can: at91_can: MSR Register: convert to FIELD_PREP()
...
====================
Link: https://lore.kernel.org/r/20231005195812.549776-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull io_uring fixes from Jens Axboe:
- syzbot report on a crash on 32-bit arm with highmem, and went digging
to check for potentially similar issues and found one more (me)
- Fix a syzbot report with PROVE_LOCKING=y and setting up the ring in a
disabled state (me)
- Fix for race with CPU hotplut and io-wq init (Jeff)
* tag 'io_uring-6.6-2023-10-06' of git://git.kernel.dk/linux:
io-wq: fully initialize wqe before calling cpuhp_state_add_instance_nocalls()
io_uring: don't allow IORING_SETUP_NO_MMAP rings on highmem pages
io_uring: ensure io_lockdep_assert_cq_locked() handles disabled rings
io_uring/kbuf: don't allow registered buffer rings on highmem pages
|
|
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for
array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle [1], add __counted_by for struct bpf_stack_map.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci [1]
Link: https://lore.kernel.org/bpf/20231006201657.work.531-kees@kernel.org
|
|
do_pages_move does not handle compat pointers for the page list.
correctly. Add in_compat_syscall check and appropriate get_user fetch
when iterating the page list.
It makes the syscall in compat mode (32-bit userspace, 64-bit kernel)
work the same way as the native 32-bit syscall again, restoring the
behavior before my broken commit 5b1b561ba73c ("mm: simplify
compat_sys_move_pages").
More specifically, my patch moved the parsing of the 'pages' array from
the main entry point into do_pages_stat(), which left the syscall
working correctly for the 'stat' operation (nodes = NULL), while the
'move' operation (nodes != NULL) is now missing the conversion and
interprets 'pages' as an array of 64-bit pointers instead of the
intended 32-bit userspace pointers.
It is possible that nobody noticed this bug because the few
applications that actually call move_pages are unlikely to run in
compat mode because of their large memory requirements, but this
clearly fixes a user-visible regression and should have been caught by
ltp.
Link: https://lkml.kernel.org/r/20231003144857.752952-1-gregory.price@memverge.com
Fixes: 5b1b561ba73c ("mm: simplify compat_sys_move_pages")
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Co-developed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We used to determine the number of page table entries to set for a NAPOT
hugepage by using the pte value which actually fails when the pte to set
is a swap entry.
So take advantage of a recent fix for arm64 reported in [1] which
introduces the size of the mapping as an argument of set_huge_pte_at(): we
can then use this size to compute the number of page table entries to set
for a NAPOT region.
Link: https://lkml.kernel.org/r/20230928151846.8229-3-alexghiti@rivosinc.com
Fixes: 82a1a1f3bfb6 ("riscv: mm: support Svnapot in hugetlb page")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reported-by: Ryan Roberts <ryan.roberts@arm.com>
Closes: https://lore.kernel.org/linux-arm-kernel/20230922115804.2043771-1-ryan.roberts@arm.com/ [1]
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Qinglin Pan <panqinglin2020@iscas.ac.cn>
Cc: Conor Dooley <conor@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Fix set_huge_pte_at()".
A recent report [1] from Ryan for arm64 revealed that we do not handle
swap entries when setting a hugepage backed by a NAPOT region (the contpte
riscv equivalent).
As explained in [1], the issue was discovered by a new test in kselftest
which uses poison entries, but the symptoms are different from arm64 though:
- the riscv kernel bugs because we do not handle VM_FAULT_HWPOISON*,
this is fixed by patch 1,
- after that, the test passes because the first pte_napot() fails (the
poison entry does not have the N bit set), and then we only set the
first page table entry covering the NAPOT hugepage, which is enough
for hugetlb_fault() to correctly raise a VM_FAULT_HWPOISON wherever we
write in this mapping since only this first page table entry is
checked
(see https://elixir.bootlin.com/linux/v6.6-rc3/source/mm/hugetlb.c#L6071).
But this seems fragile so patch 2 sets all page table entries of a
NAPOT mapping.
[1]: https://lore.kernel.org/linux-arm-kernel/20230922115804.2043771-1-ryan.roberts@arm.com/
This patch (of 2):
We used to panic when such faults were encountered but we should handle
those faults gracefully for userspace by sending a SIGBUS to the process,
like most architectures do.
Link: https://lkml.kernel.org/r/20230928151846.8229-1-alexghiti@rivosinc.com
Link: https://lkml.kernel.org/r/20230928151846.8229-2-alexghiti@rivosinc.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Andrew Jones <ajones@ventanamicro.com>
Cc: Conor Dooley <conor@kernel.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Qinglin Pan <panqinglin2020@iscas.ac.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When the calling function fails after the dup_anon_vma(), the
duplication of the anon_vma is not being undone. Add the necessary
unlink_anon_vma() call to the error paths that are missing them.
This issue showed up during inspection of the error path in vma_merge()
for an unrelated vma iterator issue.
Users may experience increased memory usage, which may be problematic as
the failure would likely be caused by a low memory situation.
Link: https://lkml.kernel.org/r/20230929183041.2835469-3-Liam.Howlett@oracle.com
Fixes: d4af56c5c7c6 ("mm: start tracking VMAs with maple tree")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
During the error path, the vma iterator may not be correctly positioned or
set to the correct range. Undo the vma_prev() call by resetting to the
passed in address. Re-walking to the same range will fix the range to the
area previously passed in.
Users would notice increased cycles as vma_merge() would be called an
extra time with vma == prev, and thus would fail to merge and return.
Link: https://lore.kernel.org/linux-mm/CAG48ez12VN1JAOtTNMY+Y2YnsU45yL5giS-Qn=ejtiHpgJAbdQ@mail.gmail.com/
Link: https://lkml.kernel.org/r/20230929183041.2835469-2-Liam.Howlett@oracle.com
Fixes: 18b098af2890 ("vma_merge: set vma iterator to correct position.")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Jann Horn <jannh@google.com>
Closes: https://lore.kernel.org/linux-mm/CAG48ez12VN1JAOtTNMY+Y2YnsU45yL5giS-Qn=ejtiHpgJAbdQ@mail.gmail.com/
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Calling vm_brk_flags() with flags set other than VM_EXEC will exit the
function without releasing the mmap_write_lock.
Just do the sanity check before the lock is acquired. This doesn't fix an
actual issue since no caller sets a flag other than VM_EXEC.
Link: https://lkml.kernel.org/r/20230929171937.work.697-kees@kernel.org
Fixes: 2e7ce7d354f2 ("mm/mmap: change do_brk_flags() to expand existing VMA and add do_brk_munmap()")
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The two users of mbind_range() are expecting that mbind_range() will
update the pointer to the previous VMA, or return an error. However,
set_mempolicy_home_node() does not call mbind_range() if there is no VMA
policy. The fix is to update the pointer to the previous VMA prior to
continuing iterating the VMAs when there is no policy.
Users may experience a WARN_ON() during VMA policy updates when updating
a range of VMAs on the home node.
Link: https://lkml.kernel.org/r/20230928172432.2246534-1-Liam.Howlett@oracle.com
Link: https://lore.kernel.org/linux-mm/CALcu4rbT+fMVNaO_F2izaCT+e7jzcAciFkOvk21HGJsmLcUuwQ@mail.gmail.com/
Fixes: f4e9e0e69468 ("mm/mempolicy: fix use-after-free of VMA iterator")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Yikebaer Aizezi <yikebaer61@gmail.com>
Closes: https://lore.kernel.org/linux-mm/CALcu4rbT+fMVNaO_F2izaCT+e7jzcAciFkOvk21HGJsmLcUuwQ@mail.gmail.com/
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When guard page debug is enabled and set_page_guard returns success, we
miss to forward page to point to start of next split range and we will do
split unexpectedly in page range without target page. Move start page
update before set_page_guard to fix this.
As we split to wrong target page, then splited pages are not able to merge
back to original order when target page is put back and splited pages
except target page is not usable. To be specific:
Consider target page is the third page in buddy page with order 2.
| buddy-2 | Page | Target | Page |
After break down to target page, we will only set first page to Guard
because of bug.
| Guard | Page | Target | Page |
When we try put_page_back_buddy with target page, the buddy page of target
if neither guard nor buddy, Then it's not able to construct original page
with order 2
| Guard | Page | buddy-0 | Page |
All pages except target page is not in free list and is not usable.
Link: https://lkml.kernel.org/r/20230927094401.68205-1-shikemeng@huaweicloud.com
Fixes: 06be6ff3d2ec ("mm,hwpoison: rework soft offline for free pages")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/fixes
Renesas fixes for v6.6
- Fix RISC-V multi-platform kernels by excluding RZ/Five.
* tag 'renesas-fixes-for-v6.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
soc: renesas: Make ARCH_R9A07G043 (riscv version) depend on NONPORTABLE
Link: https://lore.kernel.org/r/cover.1696578170.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The DSU PMU allows monitoring performance events in the DSU cluster,
which is done by configuring and reading back values from the DSU PMU
system registers. However, for write-access to be allowed by ELs lower
than EL3, the EL3 firmware needs to update the setting on the ACTLR3_EL3
register, as it is disallowed by default.
That configuration is not done on the firmware used by the MT8195 SoC,
as a consequence, booting a MT8195-based machine like
mt8195-cherry-tomato-r2 with CONFIG_ARM_DSU_PMU enabled hangs the kernel
just as it writes to the CLUSTERPMOVSCLR_EL1 register, since the
instruction faults to EL3, and BL31 apparently just re-runs the
instruction over and over.
Mark the DSU PMU node in the Devicetree with status "fail", as the
machine doesn't have a suitable firmware to make use of it from the
kernel, and allowing its driver to probe would hang the kernel.
Fixes: 37f2582883be ("arm64: dts: Add mediatek SoC mt8195 and evaluation board")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230720200753.322133-1-nfraprado@collabora.com
Link: https://lore.kernel.org/r/20231003-mediatek-fixes-v6-7-v1-5-dad7cd62a8ff@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
dtbs_check throws a warning at t-phy nodes:
Warning (unit_address_vs_reg): /t-phy@1a243000: node has a unit name, but no reg or ranges property
Warning (unit_address_vs_reg): /soc/t-phy@11c00000: node has a unit name, but no reg or ranges property
The ranges is empty thus removing the `@1a243000`, `@11c00000` from
the node name.
Fixes: 6029cae696c8 ("arm64: dts: mediatek: mt7622: harmonize node names and compatibles")
Fixes: 918aed7abd2d ("arm64: dts: mt7986: add pcie related device nodes")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230814093931.9298-2-eugen.hristev@collabora.com
Link: https://lore.kernel.org/r/20231003-mediatek-fixes-v6-7-v1-4-dad7cd62a8ff@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The dts file of the MediaTek MT8195 demo board has been updated to include
new reserved memory regions.
These reserved memory regions are:
- SCP
- VPU,
- Sound DMA
- APU.
These regions are defined with the "shared-dma-pool" compatible property.
In addition, the existing reserved memory regions have been reordered by
their addresses to improve readability and maintainability of the DTS
file.
Cc: stable@vger.kernel.org # 6.1, 6.4, 6.5
Fixes: e4a417520101 ("arm64: dts: mediatek: mt8195-demo: fix the memory size of node secmon")
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230905034511.11232-2-macpaul.lin@mediatek.com
Link: https://lore.kernel.org/r/20231003-mediatek-fixes-v6-7-v1-3-dad7cd62a8ff@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The onboard dram of mt8195-demo board is 8GB.
Cc: stable@vger.kernel.org # 6.1, 6.4, 6.5
Fixes: 6147314aeedc ("arm64: dts: mediatek: Add device-tree for MT8195 Demo board")
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230905034511.11232-1-macpaul.lin@mediatek.com
Link: https://lore.kernel.org/r/20231003-mediatek-fixes-v6-7-v1-2-dad7cd62a8ff@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
I am a top reviewer mainly for MediaTek SoC related patches in most
subsystems and I've also been upstreaming both improvements, fixes
and new drivers and devicetrees when required.
The MediaTek scene saw a generous increase in number of patches that
are sent to the lists every week, increasing the amount of required
efforts to maintain the MTK bits overall, and we will possibly see
even more of that.
For this reason, and also because of suggestions and encouragement
coming from the community, I'm stepping up to be a co-maintainer of
MediaTek SoCs support.
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20230929082009.71843-1-angelogioacchino.delregno@collabora.com
Link: https://lore.kernel.org/r/20231003-mediatek-fixes-v6-7-v1-1-dad7cd62a8ff@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes
AMDTEE fix possible use-after-free
* tag 'amdtee-fix-for-v6.6' of https://git.linaro.org/people/jens.wiklander/linux-tee:
tee: amdtee: fix use-after-free vulnerability in amdtee_close_session
Link: https://lore.kernel.org/r/20231003171835.GA669924@rayden
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The correct name of this chip is MXC4005, not MX4005. This is confirmed
both by the manufacturer website and by the title of the original commit,
which added other MXCxxxx devices as well but only this one misses a "c" in
the compatible string.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Fixes: d9bf5d37fd58 ("dt-bindings:trivial-devices: Add memsic,mxc4005/mxc6255/mxc6655 entries")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231004-mxc4005-device-tree-support-v1-1-e7c0faea72e4@bootlin.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The 'msi' child node schema is missing constraints on additional properties.
It turns out it is incomplete and properties for it are documented in the
parent node by mistake. Move the reference to msi-controller.yaml and
the custom properties to the 'msi' node. Adding 'unevaluatedProperties'
ensures all the properties in the 'msi' node are documented.
With the schema corrected, a minimal interrupt controller node is needed
to properly decode the interrupt properties since the example has
multiple interrupt parents.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Fixes: 905b986d099c ("dt-bindings: pci: Convert iProc PCIe to YAML")
Link: https://lore.kernel.org/r/20230926155613.33904-3-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Drop the unnecessary listing of properties already defined in
pci-bus.yaml. Unless there are additional constraints, it is not
necessary.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230926155351.31117-2-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The example's indentation is off. While fixing this, the 'bus' node
is unnecessary and can be dropped. It is also preferred to split up
unrelated examples to their own entries.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230926155351.31117-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Just as unevaluatedProperties or additionalProperties are required at
the top level of schemas, they should (and will) also be required for
child node schemas. That ensures only documented properties are
present for any node.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230925212803.1976803-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
A bus schema based on simple-pm-bus shouldn't define how many 'reg' entries
a child device has. That is a property of the device. Drop the 'reg' entry.
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230925212639.1975002-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Extract duplicate code from these four functions
unix_redir_to_connected()
udp_redir_to_connected()
inet_unix_redir_to_connected()
unix_inet_redir_to_connected()
to generate a new helper pairs_redir_to_connected(). Create the
different socketpairs in these four functions, then pass the
socketpairs info to the new common helper to do the connections.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Link: https://lore.kernel.org/r/54bb28dcf764e7d4227ab160883931d2173f4f3d.1696588133.git.geliang.tang@suse.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
We currently expect up to a three-digit number of tests and subtests, so:
#999/999: some_test/some_subtest: ...
Is the largest test/subtest we can see. If we happen to cross into
1000s, current logic will just truncate everything after 7th character.
This patch fixes this truncate and allows to go way higher (up to 31
characters in total). We still nicely align test numbers:
#60/66 core_reloc_btfgen/type_based___incompat:OK
#60/67 core_reloc_btfgen/type_based___fn_wrong_args:OK
#60/68 core_reloc_btfgen/type_id:OK
#60/69 core_reloc_btfgen/type_id___missing_targets:OK
#60/70 core_reloc_btfgen/enumval:OK
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20231006175744.3136675-3-andrii@kernel.org
|
|
Add support for building selftests with -O2 level of optimization, which
allows more compiler warnings detection (like lots of potentially
uninitialized usage), but also is useful to have a faster-running test
for some CPU-intensive tests.
One can build optimized versions of libbpf and selftests by running:
$ make RELEASE=1
There is a measurable speed up of about 10 seconds for me locally,
though it's mostly capped by non-parallelized serial tests. User CPU
time goes down by total 40 seconds, from 1m10s to 0m28s.
Unoptimized build (-O0)
=======================
Summary: 430/3544 PASSED, 25 SKIPPED, 4 FAILED
real 1m59.937s
user 1m10.877s
sys 3m14.880s
Optimized build (-O2)
=====================
Summary: 425/3543 PASSED, 25 SKIPPED, 9 FAILED
real 1m50.540s
user 0m28.406s
sys 3m13.198s
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20231006175744.3136675-2-andrii@kernel.org
|
|
Fix a bunch of potentially unitialized variable usage warnings that are
reported by GCC in -O2 mode. Also silence overzealous stringop-truncation
class of warnings.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20231006175744.3136675-1-andrii@kernel.org
|
|
Currently, there exists a system-wide setting related to CPU security
mitigations, denoted as 'mitigations='. When set to 'mitigations=off', it
deactivates all optional CPU mitigations. Therefore, if we implement a
system-wide 'mitigations=off' setting, it should inherently bypass Spectre
v1 and Spectre v4 in the BPF subsystem.
Please note that there is also a more specific 'nospectre_v1' setting on
x86 and ppc architectures, though it is not currently exported. For the
time being, let's disregard more fine-grained options.
This idea emerged during our discussion about potential Spectre v1 attacks
with Luis [0].
[0] https://lore.kernel.org/bpf/b4fc15f7-b204-767e-ebb9-fdb4233961fb@iogearbox.net
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Song Liu <song@kernel.org>
Acked-by: KP Singh <kpsingh@kernel.org>
Cc: Luis Gerhorst <gerhorst@cs.fau.de>
Link: https://lore.kernel.org/bpf/20231005084123.1338-1-laoar.shao@gmail.com
|
|
On i.MX8MQ the MIPI CSI block does have an associated power-domain, but
the CSI bridge does not.
Remove the power-domains requirement from the i.MX8MQ CSI bridge
to fix the following schema warning:
imx8mq-librem5-r4.dtb: csi@30a90000: 'power-domains' is a required property
from schema $id: http://devicetree.org/schemas/media/nxp,imx7-csi.yaml#
Fixes: de655386845a ("media: dt-bindings: media: imx7-csi: Document i.MX8M power-domains property")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20231004201105.2323758-1-festevam@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fixes from Bjorn Helgaas:
- Fix a qcom register offset that broke IPQ8074 PCIe controller
enumeration (Sricharan Ramabadhran)
- Handle interrupt parsing failures when creating a device tree node to
avoid using uninitialized data (Lizhi Hou)
- Clean up if adding PCI device node fails when creating a device tree
node to avoid a memory leak (Lizhi Hou)
- If a link is down, mark all downstream devices as "disconnected" so
we don't wait for them on resume (Mika Westerberg)
* tag 'pci-v6.6-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/PM: Mark devices disconnected if upstream PCIe link is down on resume
PCI: of: Destroy changeset when adding PCI device node fails
PCI: of_property: Handle interrupt parsing failures
PCI: qcom: Fix IPQ8074 enumeration
|
