| Age | Commit message (Collapse) | Author |
|---|
|
Log recovery has always run on read only mounts, even where the primary
superblock advertises unknown rocompat bits. Due to a misunderstanding
between Eric and Darrick back in 2018, we accidentally changed the
superblock write verifier to shutdown the fs over that exact scenario.
As a result, the log cleaning that occurs at the end of the mounting
process fails if there are unknown rocompat bits set.
As we now allow writing of the superblock if there are unknown rocompat
bits set on a RO mount, we no longer want to turn off RO state to allow
log recovery to succeed on a RO mount. Hence we also remove all the
(now unnecessary) RO state toggling from the log recovery path.
Fixes: 9e037cb7972f ("xfs: check for unknown v5 feature bits in superblock write verifier"
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
The previous patch to reload unrecovered unlinked inodes when adding a
newly created inode to the unlinked list is missing a key piece of
functionality. It doesn't handle the case that someone calls xfs_iget
on an inode that is not the last item in the incore list. For example,
if at mount time the ondisk iunlink bucket looks like this:
AGI -> 7 -> 22 -> 3 -> NULL
None of these three inodes are cached in memory. Now let's say that
someone tries to open inode 3 by handle. We need to walk the list to
make sure that inodes 7 and 22 get loaded cold, and that the
i_prev_unlinked of inode 3 gets set to 22.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
In the next patch, we're going to prohibit log recovery if the primary
superblock contains an unrecognized rocompat feature bit even on
readonly mounts. This requires removing all the code in the log
mounting process that temporarily disables the readonly state.
Unfortunately, inode inactivation disables itself on readonly mounts.
Clearing the iunlinked lists after log recovery needs inactivation to
run to free the unreferenced inodes, which (AFAICT) is the only reason
why log mounting plays games with the readonly state in the first place.
Therefore, change the inactivation predicates to allow inactivation
during log recovery of a readonly mount.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
Alter the definition of i_prev_unlinked slightly to make it more obvious
when an inode with 0 link count is not part of the iunlink bucket lists
rooted in the AGI. This distinction is necessary because it is not
sufficient to check inode.i_nlink to decide if an inode is on the
unlinked list. Updates to i_nlink can happen while holding only
ILOCK_EXCL, but updates to an inode's position in the AGI unlinked list
(which happen after the nlink update) requires both ILOCK_EXCL and the
AGI buffer lock.
The next few patches will make it possible to reload an entire unlinked
bucket list when we're walking the inode table or performing handle
operations and need more than the ability to iget the last inode in the
chain.
The upcoming directory repair code also needs to be able to make this
distinction to decide if a zero link count directory should be moved to
the orphanage or allowed to inactivate. An upcoming enhancement to the
online AGI fsck code will need this distinction to check and rebuild the
AGI unlinked buckets.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Eric Dumazet says:
====================
tcp: backlog processing optims
First patches are mostly preparing the ground for the last one.
Last patch of the series implements sort of ACK reduction
only for the cases a TCP receiver is under high stress,
which happens for high throughput flows.
This gives us a ~20% increase of single TCP flow (100Gbit -> 120Gbit)
====================
Link: https://lore.kernel.org/r/20230911170531.828100-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This idea came after a particular workload requested
the quickack attribute set on routes, and a performance
drop was noticed for large bulk transfers.
For high throughput flows, it is best to use one cpu
running the user thread issuing socket system calls,
and a separate cpu to process incoming packets from BH context.
(With TSO/GRO, bottleneck is usually the 'user' cpu)
Problem is the user thread can spend a lot of time while holding
the socket lock, forcing BH handler to queue most of incoming
packets in the socket backlog.
Whenever the user thread releases the socket lock, it must first
process all accumulated packets in the backlog, potentially
adding latency spikes. Due to flood mitigation, having too many
packets in the backlog increases chance of unexpected drops.
Backlog processing unfortunately shifts a fair amount of cpu cycles
from the BH cpu to the 'user' cpu, thus reducing max throughput.
This patch takes advantage of the backlog processing,
and the fact that ACK are mostly cumulative.
The idea is to detect we are in the backlog processing
and defer all eligible ACK into a single one,
sent from tcp_release_cb().
This saves cpu cycles on both sides, and network resources.
Performance of a single TCP flow on a 200Gbit NIC:
- Throughput is increased by 20% (100Gbit -> 120Gbit).
- Number of generated ACK per second shrinks from 240,000 to 40,000.
- Number of backlog drops per second shrinks from 230 to 0.
Benchmark context:
- Regular netperf TCP_STREAM (no zerocopy)
- Intel(R) Xeon(R) Platinum 8481C (Saphire Rapids)
- MAX_SKB_FRAGS = 17 (~60KB per GRO packet)
This feature is guarded by a new sysctl, and enabled by default:
/proc/sys/net/ipv4/tcp_backlog_ack_defer
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Dave Taht <dave.taht@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
__sk_flush_backlog() / sk_flush_backlog() are used
when TCP recvmsg()/sendmsg() process large chunks,
to not let packets in the backlog too long.
It makes sense to call tcp_release_cb() to also
process actions held in sk->sk_tsq_flags for smoother
scheduling.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
sock_release_ownership() should only be called by user
owning the socket lock.
After prior commit, we can remove one condition.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This partially reverts c3f9b01849ef ("tcp: tcp_release_cb()
should release socket ownership").
prequeue has been removed by Florian in commit e7942d0633c4
("tcp: remove prequeue support")
__tcp_checksum_complete_user() being gone, we no longer
have to release socket ownership in tcp_release_cb().
This is a prereq for third patch in the series
("net: call prot->release_cb() when processing backlog").
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
iomap_to_bh currently BUG()s when the passed in block number is not
in the iomap. For file systems that have proper synchronization this
should never happen and so far hasn't in mainline, but for block devices
size changes aren't fully synchronized against ongoing I/O. Instead
of BUG()ing in this case, return -EIO to the caller, which already has
proper error handling. While we're at it, also return -EIO for an
unknown iomap state instead of returning garbage.
Fixes: 487c607df790 ("block: use iomap for writes to block devices")
Reported-by: syzbot+4a08ffdf3667b36650a1@syzkaller.appspotmail.com
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
|
|
ip6_sock_set_addr_preferences() second argument should be an integer.
SUNRPC attempts to set IPV6_PREFER_SRC_PUBLIC were
translated to IPV6_PREFER_SRC_TMP
Fixes: 18d5ad623275 ("ipv6: add ip6_sock_set_addr_preferences")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230911154213.713941-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
CHARGER_RT5033 should honor the EXTCON setting to prevent these
build errors:
riscv64-linux-ld: drivers/power/supply/rt5033_charger.o: in function `.L33':
rt5033_charger.c:(.text.rt5033_charger_probe+0x578): undefined reference to `extcon_find_edev_by_node'
riscv64-linux-ld: drivers/power/supply/rt5033_charger.o: in function `.L0 ':
rt5033_charger.c:(.text.rt5033_charger_probe+0x64e): undefined reference to `devm_extcon_register_notifier_all'
riscv64-linux-ld: drivers/power/supply/rt5033_charger.o: in function `.L96':
rt5033_charger.c:(.text.rt5033_charger_extcon_work+0x32): undefined reference to `extcon_get_state'
Fixes: 12cc585f36b8 ("power: supply: rt5033_charger: Add cable detection and USB OTG supply")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jakob Hauser <jahau@rocketmail.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Lee Jones <lee@kernel.org>
Cc: linux-pm@vger.kernel.org
Link: https://lore.kernel.org/r/20230828224201.26823-1-rdunlap@infradead.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
The Starfive VisionFive 2 has a 16MiB NOR flash, while the reserved-data
partition is declared starting at address 0x600000 with a size of
0x1000000. This causes the kernel to output the following warning:
[ 22.156589] mtd: partition "reserved-data" extends beyond the end of device "13010000.spi.0" -- size truncated to 0xa00000
It seems to be a confusion between the size of the partition and the end
address. Fix that by specifying the right size.
Fixes: 8384087a4223 ("riscv: dts: starfive: Add QSPI controller node for StarFive JH7110 SoC")
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
- kselftest runner script to propagate SIGTERM to runner child
to avoid kselftest hang
- install symlinks required for test execution to avoid test
failures
- kselftest dependency checker script argument parsing
* tag 'linux-kselftest-next-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: Keep symlinks, when possible
selftests: fix dependency checker script
kselftest/runner.sh: Propagate SIGTERM to runner child
selftests/ftrace: Correctly enable event in instance-event.tc
|
|
If a device has no NUMA node information associated with it, the driver
puts the device in node first_memory_node (say node 0). Not having a
NUMA node and being associated with node 0 are completely different
things and it makes little sense to mix the two.
Signed-off-by: Pratyush Yadav <ptyadav@amazon.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit fixes from Shuah Khan:
"Fixes to possible memory leak, null-ptr-deref, wild-memory-access, and
error path bugs"
* tag 'linux-kselftest-kunit-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Fix possible memory leak in kunit_filter_suites()
kunit: Fix possible null-ptr-deref in kunit_parse_glob_filter()
kunit: Fix the wrong err path and add goto labels in kunit_filter_suites()
kunit: Fix wild-memory-access bug in kunit_free_suite_set()
kunit: test: Make filter strings in executor_test writable
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs
Pull overlayfs fixes from Amir Goldstein:
"Two fixes for pretty old regressions"
* tag 'ovl-fixes-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs:
ovl: fix incorrect fdput() on aio completion
ovl: fix failed copyup of fileattr on a symlink
|
|
Commit cb855971d717 ("x86/putuser: Provide room for padding") changed
__put_user_nocheck_*() into proper functions but failed to note that
SYM_FUNC_START() already provides ENDBR, rendering the explicit ENDBR
superfluous.
Fixes: cb855971d717 ("x86/putuser: Provide room for padding")
Reported-by: David Kaplan <David.Kaplan@amd.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230802110323.086971726@infradead.org
|
|
It was reported that under certain circumstances GCC emits ENDBR
instructions for _THIS_IP_ usage. Specifically, when it appears at the
start of a basic block -- but not elsewhere.
Since _THIS_IP_ is never used for control flow, these ENDBR
instructions are completely superfluous. Override the _THIS_IP_
definition for x86_64 to avoid this.
Less ENDBR instructions is better.
Fixes: 156ff4a544ae ("x86/ibt: Base IBT bits")
Reported-by: David Kaplan <David.Kaplan@amd.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230802110323.016197440@infradead.org
|
|
John David Anglin reported parisc has been broken since commit
ddb5cdbafaaa ("kbuild: generate KSYMTAB entries by modpost").
Like ia64, parisc64 uses a function descriptor. The function
references must be prefixed with P%.
Also, symbols prefixed $$ from the library have the symbol type
STT_LOPROC instead of STT_FUNC. They should be handled as functions
too.
Fixes: ddb5cdbafaaa ("kbuild: generate KSYMTAB entries by modpost")
Reported-by: John David Anglin <dave.anglin@bell.net>
Tested-by: John David Anglin <dave.anglin@bell.net>
Tested-by: Helge Deller <deller@gmx.de>
Closes: https://lore.kernel.org/linux-parisc/1901598a-e11d-f7dd-a5d9-9a69d06e6b6e@bell.net/T/#u
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Fix to unmount the tracefs if the ftracetest mounted it for recovering
system environment. If the tracefs is already mounted, this does nothing.
Suggested-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/all/29fce076-746c-4650-8358-b4e0fa215cf7@sirena.org.uk/
Fixes: cbd965bde74c ("ftrace/selftests: Return the skip code when tracing directory not configured in kernel")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Turns out CONFIG_BPF_KPROBE_OVERRIDE=y is only enabled in x86-64 CI, but
is not set on aarch64, causing CI failures ([0]).
Move CONFIG_BPF_KPROBE_OVERRIDE=y to arch-agnostic CI config.
[0] https://github.com/kernel-patches/bpf/actions/runs/6122324047/job/16618390535
Fixes: 7182e56411b9 ("selftests/bpf: Add kprobe_multi override test")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230912055928.1704269-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
There's an early return in veth_set_features() if the device is in a down
state, which leads to the XDP feature flags not being updated when enabling
GRO while the device is down. Which in turn leads to XDP_REDIRECT not
working, because the redirect code now checks the flags.
Fix this by updating the feature flags after bringing the device up.
Before this patch:
NETDEV_XDP_ACT_BASIC: yes
NETDEV_XDP_ACT_REDIRECT: yes
NETDEV_XDP_ACT_NDO_XMIT: no
NETDEV_XDP_ACT_XSK_ZEROCOPY: no
NETDEV_XDP_ACT_HW_OFFLOAD: no
NETDEV_XDP_ACT_RX_SG: yes
NETDEV_XDP_ACT_NDO_XMIT_SG: no
After this patch:
NETDEV_XDP_ACT_BASIC: yes
NETDEV_XDP_ACT_REDIRECT: yes
NETDEV_XDP_ACT_NDO_XMIT: yes
NETDEV_XDP_ACT_XSK_ZEROCOPY: no
NETDEV_XDP_ACT_HW_OFFLOAD: no
NETDEV_XDP_ACT_RX_SG: yes
NETDEV_XDP_ACT_NDO_XMIT_SG: yes
Fixes: fccca038f300 ("veth: take into account device reconfiguration for xdp_features flag")
Fixes: 66c0e13ad236 ("drivers: net: turn on XDP features")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20230911135826.722295-1-toke@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Inject fault while probing btrfs.ko, if kstrdup() fails in
eventfs_prepare_ef() in eventfs_add_dir(), it will return ERR_PTR
to assign file->ef. But the eventfs_remove() check NULL in
trace_module_remove_events(), which causes the below NULL
pointer dereference.
As both Masami and Steven suggest, allocater side should handle the
error carefully and remove it, so fix the places where it failed.
Could not create tracefs 'raid56_write' directory
Btrfs loaded, zoned=no, fsverity=no
Unable to handle kernel NULL pointer dereference at virtual address 000000000000001c
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=0000000102544000
[000000000000001c] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
Dumping ftrace buffer:
(ftrace buffer empty)
Modules linked in: btrfs(-) libcrc32c xor xor_neon raid6_pq cfg80211 rfkill 8021q garp mrp stp llc ipv6 [last unloaded: btrfs]
CPU: 15 PID: 1343 Comm: rmmod Tainted: G N 6.5.0+ #40
Hardware name: linux,dummy-virt (DT)
pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : eventfs_remove_rec+0x24/0xc0
lr : eventfs_remove+0x68/0x1d8
sp : ffff800082d63b60
x29: ffff800082d63b60 x28: ffffb84b80ddd00c x27: ffffb84b3054ba40
x26: 0000000000000002 x25: ffff800082d63bf8 x24: ffffb84b8398e440
x23: ffffb84b82af3000 x22: dead000000000100 x21: dead000000000122
x20: ffff800082d63bf8 x19: fffffffffffffff4 x18: ffffb84b82508820
x17: 0000000000000000 x16: 0000000000000000 x15: 000083bc876a3166
x14: 000000000000006d x13: 000000000000006d x12: 0000000000000000
x11: 0000000000000001 x10: 00000000000017e0 x9 : 0000000000000001
x8 : 0000000000000000 x7 : 0000000000000000 x6 : ffffb84b84289804
x5 : 0000000000000000 x4 : 9696969696969697 x3 : ffff33a5b7601f38
x2 : 0000000000000000 x1 : ffff800082d63bf8 x0 : fffffffffffffff4
Call trace:
eventfs_remove_rec+0x24/0xc0
eventfs_remove+0x68/0x1d8
remove_event_file_dir+0x88/0x100
event_remove+0x140/0x15c
trace_module_notify+0x1fc/0x230
notifier_call_chain+0x98/0x17c
blocking_notifier_call_chain+0x4c/0x74
__arm64_sys_delete_module+0x1a4/0x298
invoke_syscall+0x44/0x100
el0_svc_common.constprop.1+0x68/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x3c/0xc4
el0t_64_sync_handler+0xa0/0xc4
el0t_64_sync+0x174/0x178
Code: 5400052c a90153b3 aa0003f3 aa0103f4 (f9401400)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Oops: Fatal exception
SMP: stopping secondary CPUs
Dumping ftrace buffer:
(ftrace buffer empty)
Kernel Offset: 0x384b00c00000 from 0xffff800080000000
PHYS_OFFSET: 0xffffcc5b80000000
CPU features: 0x88000203,3c020000,1000421b
Memory Limit: none
Rebooting in 1 seconds..
Link: https://lore.kernel.org/linux-trace-kernel/20230912134752.1838524-1-ruanjinjie@huawei.com
Link: https://lore.kernel.org/all/20230912025808.668187-1-ruanjinjie@huawei.com/
Link: https://lore.kernel.org/all/20230911052818.1020547-1-ruanjinjie@huawei.com/
Link: https://lore.kernel.org/all/20230909072817.182846-1-ruanjinjie@huawei.com/
Link: https://lore.kernel.org/all/20230908074816.3724716-1-ruanjinjie@huawei.com/
Cc: Ajay Kaher <akaher@vmware.com>
Fixes: 5bdcd5f5331a ("eventfs: Implement removal of meta data from eventfs")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The commit d21fdd07cea4 ("driver core: Return proper error code when
dev_set_name() fails") rewrote the logic of handling the dev_set_name()
error codes, but missed the point that initially set error value to
-EINVAL might be rewritten and hence the error path can't be triggered
at some circumstances. To fix this, make sure that error variable is
set to -EINVAL when other conditionals are false.
Reported-by: syzbot+bdfb03b1ec8b342c12cb@syzkaller.appspotmail.com
Fixes: d21fdd07cea4 ("driver core: Return proper error code when dev_set_name() fails")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230828145824.3895288-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit b5c75b68b7ded84d4c82118974ce3975a4dcaa74.
The commit makes it impossible to select configuration options that
depend on COMEDI_8254, COMEDI_DAS08, COMEDI_NI_LABPC, or
COMEDI_AMPLC_DIO200 options due to changing 'select' directives to
'depends on' directives and there being no other way to select those
codependent configuration options.
Fixes: b5c75b68b7de ("comedi: add HAS_IOPORT dependencies")
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: <stable@vger.kernel.org> # v6.5+
Acked-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20230905090922.3314-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
sample
timerlat auto-analysis takes note of all IRQs, before or after the
execution of the timerlat thread.
Because we cannot go backward in the trace (we will fix it when
moving to trace-cmd lib?), timerlat aa take note of the last IRQ
execution in the waiting for the IRQ state, and then print it
if it is executed after the expected timer IRQ starting time.
After the thread sample, the timerlat starts recording the next IRQs as
"previous" irq for the next occurrence.
However, if an IRQ happens after the thread measurement but before the
tracing stops, it is classified as a previous IRQ. That is not
wrong, as it can be "previous" for the subsequent activation. What is
wrong is considering it as a potential source for the last activation.
Ignore the IRQ interference that happens after the IRQ starting time for
now. A future improvement for timerlat can be either keeping a list of
previous IRQ execution or using the trace-cmd library. Still, it requires
further investigation - it is a new feature.
Link: https://lore.kernel.org/lkml/a44a3f5c801dcc697bacf7325b65d4a5b0460537.1691162043.git.bristot@kernel.org
Fixes: 27e348b221f6 ("rtla/timerlat: Add auto-analysis core")
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
|
|
When estimating the IRQ timer delay, we are dealing with two different
clock sources: the external clock source that timerlat uses as a reference
and the clock used by the tracer. There are also two moments: the time
reading the clock and the timer in which the event is placed in the
buffer (the trace event timestamp).
If the processor is slow or there is some hardware noise, the difference
between the timestamp and the external clock, read can be longer than the
IRQ handler delay, resulting in a negative time.
If so, set IRQ to start delay as 0. In the end, it is less near-zero and relevant
then the noise.
Link: https://lore.kernel.org/lkml/a066fb667c7136d86dcddb3c7ccd72587db3e7c7.1691162043.git.bristot@kernel.org
Fixes: 27e348b221f6 ("rtla/timerlat: Add auto-analysis core")
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
|
|
The thread thread_thread_sum accounts for thread interference
during a single activation. It was not being zeroed, so it was
accumulating thread interference over all activations.
It was not that visible when timerlat was the highest priority.
Link: https://lore.kernel.org/lkml/97bff55b0141f2d01b47d9450a5672fde147b89a.1691162043.git.bristot@kernel.org
Fixes: 27e348b221f6 ("rtla/timerlat: Add auto-analysis core")
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
|
|
If /proc/fs/nfsd/pool_stats is open when the last nfsd thread exits, then
when the file is closed a NULL pointer is dereferenced.
This is because nfsd_pool_stats_release() assumes that the
pointer to the svc_serv cannot become NULL while a reference is held.
This used to be the case but a recent patch split nfsd_last_thread() out
from nfsd_put(), and clearing the pointer is done in nfsd_last_thread().
This is easily reproduced by running
rpc.nfsd 8 ; ( rpc.nfsd 0;true) < /proc/fs/nfsd/pool_stats
Fortunately nfsd_pool_stats_release() has easy access to the svc_serv
pointer, and so can call svc_put() on it directly.
Fixes: 9f28a971ee9f ("nfsd: separate nfsd_last_thread() from nfsd_put()")
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
If jack-detection is not used; or has already been disabled then
there is no need to call rt5640_cancel_work().
Move the rt5640_cancel_work() inside the "if (rt5640->jack) {}" block,
grouping it together with the disabling of the IRQ which queues the work
in the first place.
This also makes suspend() symetrical with resume() which re-queues the work
in an "if (rt5640->jack) {}" block.
Cc: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230912113245.320159-7-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Set "rt5640->irq_requested = true" after a successful request_irq()
in rt5640_enable_hda_jack_detect(), so that rt5640_disable_jack_detect()
properly frees the IRQ.
This fixes the IRQ not being freed on rmmod / driver unbind.
Fixes: 2b9c8d2b3c89 ("ASoC: rt5640: Add the HDA header support")
Cc: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230912113245.320159-6-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The jack-detect IRQ should be enabled *after* the jack-detect related
configuration registers have been programmed.
Move the enable_irq() call for this to after the register setup.
Fixes: 5fabcc90e79b ("ASoC: rt5640: Fix Jack work after system suspend")
Cc: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230912113245.320159-5-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When jack-detect was originally added disabling the IRQ during suspend
was done by the sound/soc/intel/boards/bytcr_rt5640.c driver
calling snd_soc_component_set_jack(NULL) on suspend, which calls
rt5640_disable_jack_detect(), which calls free_irq() which also
disables it.
Commit 5fabcc90e79b ("ASoC: rt5640: Fix Jack work after system suspend")
added disable_irq() / enable_irq() calls on suspend/resume for machine
drivers which do not call snd_soc_component_set_jack(NULL) on suspend.
The new disable_irq() / enable_irq() are made conditional by
"if (rt5640->irq)" statements, but this is true for the machine drivers
which do call snd_soc_component_set_jack(NULL) on suspend too, causing
a disable_irq() call there on the already free-ed IRQ.
Change the "if (rt5640->irq)" condition to "if (rt5640->jack)" to fix this,
rt5640->jack is only set if the jack-detect IRQ handler is still active
when rt5640_suspend() runs.
And adjust rt5640_enable_hda_jack_detect()'s request_irq() error handling
to set rt5640->jack to NULL to match (note that the old setting of irq to
-ENOXIO still resulted in disable_irq(-ENOXIO) calls on suspend).
Fixes: 5fabcc90e79b ("ASoC: rt5640: Fix Jack work after system suspend")
Cc: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230912113245.320159-4-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Following prints are observed while testing audio on Jetson AGX Orin which
has onboard RT5640 audio codec:
BUG: sleeping function called from invalid context at kernel/workqueue.c:3027
in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 0, name: swapper/0
preempt_count: 10001, expected: 0
RCU nest depth: 0, expected: 0
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at kernel/irq/handle.c:159 __handle_irq_event_percpu+0x1e0/0x270
---[ end trace ad1c64905aac14a6 ]-
The IRQ handler rt5640_irq() runs in interrupt context and can sleep
during cancel_delayed_work_sync().
The only thing which rt5640_irq() does is cancel + (re-)queue
the jack_work delayed_work. This can be done in a single non sleeping
call by replacing queue_delayed_work() with mod_delayed_work(),
avoiding the sleep in atomic context.
Fixes: 051dade34695 ("ASoC: rt5640: Fix the wrong state of JD1 and JD2")
Reported-by: Sameer Pujar <spujar@nvidia.com>
Closes: https://lore.kernel.org/r/1688015537-31682-4-git-send-email-spujar@nvidia.com
Cc: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230912113245.320159-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit 70a6404ff610 ("ASoC: rt5640: Fix sleep in atomic context")
not only switched from request_irq() to request_threaded_irq(),
to fix the sleep in atomic context issue, but it also added
devm management of the IRQ by actually switching to
devm_request_threaded_irq() (without any explanation in the commit
message for this change).
This is wrong since the IRQ was already explicitly managed by
the driver. On unbind the ASoC core will call rt5640_set_jack(NULL)
which in turn will call rt5640_disable_jack_detect() which
frees the IRQ already. So now we have a double free.
Besides the unexplained switch to devm being wrong, the actual fix
for the sleep in atomic context issue also is not the best solution.
The only thing which rt5640_irq() does is cancel + (re-)queue
the jack_work delayed_work. This can be done in a single non sleeping
call by replacing queue_delayed_work() with mod_delayed_work(),
which does not sleep. Using mod_delayed_work() is a much better fix
then adding a thread which does nothing other then queuing a work-item.
This patch is a straight revert of the troublesome changes, the switch
to mod_delayed_work() is done in a separate follow-up patch.
Fixes: 70a6404ff610 ("ASoC: rt5640: Fix sleep in atomic context")
Cc: Sameer Pujar <spujar@nvidia.com>
Cc: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230912113245.320159-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is no need to use temporary string for the debugfs directory name as
we can use the device name of the card.
This change will also fixes the following compiler warning/error (W=1):
sound/core/init.c: In function ‘snd_card_init’:
sound/core/init.c:367:28: error: ‘%d’ directive writing between 1 and 10 bytes into a region of size 4 [-Werror=format-overflow=]
367 | sprintf(name, "card%d", idx);
| ^~
sound/core/init.c:367:23: note: directive argument in the range [0, 2147483646]
367 | sprintf(name, "card%d", idx);
| ^~~~~~~~
sound/core/init.c:367:9: note: ‘sprintf’ output between 6 and 15 bytes into a destination of size 8
367 | sprintf(name, "card%d", idx);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
The idx is guarantied to be less than SNDRV_CARDS (max 256 or 8) by the
code in snd_card_init(), however the compiler does not see that.
The warnings got brought to light by a recent patch upstream:
commit 6d4ab2e97dcf ("extrawarn: enable format and stringop overflow warnings in W=1")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230912110113.3166-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
macb_set_tx_clk() is called under a spinlock but itself calls clk_set_rate()
which can sleep. This results in:
| BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580
| pps pps1: new PPS source ptp1
| in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 40, name: kworker/u4:3
| preempt_count: 1, expected: 0
| RCU nest depth: 0, expected: 0
| 4 locks held by kworker/u4:3/40:
| #0: ffff000003409148
| macb ff0c0000.ethernet: gem-ptp-timer ptp clock registered.
| ((wq_completion)events_power_efficient){+.+.}-{0:0}, at: process_one_work+0x14c/0x51c
| #1: ffff8000833cbdd8 ((work_completion)(&pl->resolve)){+.+.}-{0:0}, at: process_one_work+0x14c/0x51c
| #2: ffff000004f01578 (&pl->state_mutex){+.+.}-{4:4}, at: phylink_resolve+0x44/0x4e8
| #3: ffff000004f06f50 (&bp->lock){....}-{3:3}, at: macb_mac_link_up+0x40/0x2ac
| irq event stamp: 113998
| hardirqs last enabled at (113997): [<ffff800080e8503c>] _raw_spin_unlock_irq+0x30/0x64
| hardirqs last disabled at (113998): [<ffff800080e84478>] _raw_spin_lock_irqsave+0xac/0xc8
| softirqs last enabled at (113608): [<ffff800080010630>] __do_softirq+0x430/0x4e4
| softirqs last disabled at (113597): [<ffff80008001614c>] ____do_softirq+0x10/0x1c
| CPU: 0 PID: 40 Comm: kworker/u4:3 Not tainted 6.5.0-11717-g9355ce8b2f50-dirty #368
| Hardware name: ... ZynqMP ... (DT)
| Workqueue: events_power_efficient phylink_resolve
| Call trace:
| dump_backtrace+0x98/0xf0
| show_stack+0x18/0x24
| dump_stack_lvl+0x60/0xac
| dump_stack+0x18/0x24
| __might_resched+0x144/0x24c
| __might_sleep+0x48/0x98
| __mutex_lock+0x58/0x7b0
| mutex_lock_nested+0x24/0x30
| clk_prepare_lock+0x4c/0xa8
| clk_set_rate+0x24/0x8c
| macb_mac_link_up+0x25c/0x2ac
| phylink_resolve+0x178/0x4e8
| process_one_work+0x1ec/0x51c
| worker_thread+0x1ec/0x3e4
| kthread+0x120/0x124
| ret_from_fork+0x10/0x20
The obvious fix is to move the call to macb_set_tx_clk() out of the
protected area. This seems safe as rx and tx are both disabled anyway at
this point.
It is however not entirely clear what the spinlock shall protect. It
could be the read-modify-write access to the NCFGR register, but this
is accessed in macb_set_rx_mode() and macb_set_rxcsum_feature() as well
without holding the spinlock. It could also be the register accesses
done in mog_init_rings() or macb_init_buffers(), but again these
functions are called without holding the spinlock in macb_hresp_error_task().
The locking seems fishy in this driver and it might deserve another look
before this patch is applied.
Fixes: 633e98a711ac0 ("net: macb: use resolved link config in mac_link_up()")
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20230908112913.1701766-1-s.hauer@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
for '#interrupt-cells' property
Update description for '#interrupt-cells' property to utilize the
RZG2L_{NMI,IRQX} for the first cell defined in the
include/dt-bindings/interrupt-controller/irqc-rzg2l.h file.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fixes: 96fed779d3d4cb3c ("dt-bindings: interrupt-controller: Add Renesas RZ/G2L Interrupt Controller")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220722151155.21100-3-prabhakar.mahadev-lad.rj@bp.renesas.com
|
|
Follow the example of other platforms and extend the PDC resource region
to 0x30000, so that the PDC driver can read the PDC_VERSION register.
Fixes: 397ad94668c1 ("arm64: dts: qcom: sm8150: Add pdc interrupt controller node")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230905-topic-sm8x50-upstream-pdc-ver-v4-2-fc633c7df84b@linaro.org
|
|
Starting from HW version 3.2 the IRQ_ENABLE bit has moved to the
IRQ_i_CFG register and requires a change of the driver to avoid
writing into an undefined register address.
Get the HW version from registers and set the IRQ_ENABLE bit to the
correct register depending on the HW version.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Maulik Shah <quic_mkshah@quicinc.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230905-topic-sm8x50-upstream-pdc-ver-v4-1-fc633c7df84b@linaro.org
|
|
Apparently Acer Chromebook C740 (BDW-ULT) doesn't have the
eDP HPD line properly connected, and thus fails the new
HPD check during eDP probe. The result is that we lose the
eDP output.
I suspect all such machines would be Chromebooks or other
Linux exclusive systems as the Windows driver likely wouldn't
work either. I did check a few other BDW machines here and
those do have eDP HPD connected, one of them even is a
different Chromebook (Samus).
To account for these funky machines let's skip the HPD check when
it looks like the eDP port is the only one using that specific AUX
channel. In case of multiple ports sharing the same AUX CH (eg. on
Asrock B250M-HDV) we still do the check and thus should correctly
ignore the eDP port in favor of the other DP port (usually a DP->VGA
converter).
v2: Don't oops during list iteration
Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9264
Fixes: cfe5bdfb27fa ("drm/i915: Check HPD live state during eDP probe")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230908052527.685-1-ville.syrjala@linux.intel.com
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
(cherry picked from commit 70052100fabec5d8c1b09c9959817a2f4517e6b5)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Like the Lenovo 82TL and 82V2, the Lenovo 82QF (Yoga 7 14ARB7) and 82UG
(Legion S7 16ARHA7) both need a quirk entry for the internal microphone to
function. Commit c008323fe361 ("ASoC: amd: yc: Fix a non-functional mic on
Lenovo 82SJ") restricted the quirk that previously matched "82" to "82V2",
breaking microphone functionality on these devices. Fix this by adding
specific quirks for these models, as was done for the Lenovo 82TL.
Fixes: c008323fe361 ("ASoC: amd: yc: Fix a non-functional mic on Lenovo 82SJ")
Closes: https://github.com/tomsom/yoga-linux/issues/51
Link: https://bugzilla.kernel.org/show_bug.cgi?id=208555#c780
Cc: stable@vger.kernel.org
Signed-off-by: August Wikerfors <git@augustwikerfors.se>
Link: https://lore.kernel.org/r/20230911213409.6106-1-git@augustwikerfors.se
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When SVE is enabled, the host may set bit 16 in SMCCC function IDs, a
hint that indicates an unused SVE state. At the moment NVHE doesn't
account for this bit when inspecting the function ID, and rejects most
calls. Clear the hint bit before comparing function IDs.
About version compatibility: the host's PSCI driver initially probes the
firmware for a SMCCC version number. If the firmware implements a
protocol recent enough (1.3), subsequent SMCCC calls have the hint bit
set. Since the hint bit was reserved in earlier versions of the
protocol, clearing it is fine regardless of the version in use.
When a new hint is added to the protocol in the future, it will be added
to ARM_SMCCC_CALL_HINTS and NVHE will handle it straight away. This
patch only clears known hints and leaves reserved bits as is, because
future SMCCC versions could use reserved bits as modifiers for the
function ID, rather than hints.
Fixes: cfa7ff959a78 ("arm64: smccc: Support SMCCC v1.3 SVE register saving hint")
Reported-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230911145254.934414-4-jean-philippe@linaro.org
|
|
Marek reports that his RPi4 spits out a warning at boot time,
right at the point where the GICv2 virtual CPU interface gets
mapped.
Upon investigation, it seems that we never return the allocated
VA and use whatever was on the stack at this point. Yes, this
is good stuff, and Marek was pretty lucky that he ended-up with
a VA that intersected with something that was already mapped.
On my setup, this random value is plausible enough for the mapping
to take place. Who knows what happens...
Fixes: f156a7d13fc3 ("KVM: arm64: Remove size-order align in the nVHE hyp private VA range")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/79b0ad6e-0c2a-f777-d504-e40e8123d81d@samsung.com
Link: https://lore.kernel.org/r/20230828153121.4179627-1-maz@kernel.org
|
|
If system has two speakers and one connect to 0x14 pin, use this
function will disable it.
Fixes: e43252db7e20 ("ALSA: hda/realtek - ALC287 I2S speaker platform support")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/r/e3f2aac3fe6a47079d728a6443358cc2@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Use bitmap_zalloc() and bitmap_free() instead of hand-writing them.
It is less verbose and it improves the type checking and semantic.
While at it, add missing header inclusion (should be bitops.h,
but with the above change it becomes bitmap.h).
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230911131618.4159437-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit 5904de0d735b ("PM: hibernate: Do not get block device exclusively
in test_resume mode") fixes a hibernation issue under test_resume mode.
That commit is supposed to open the block device in non-exclusive mode
when in test_resume. However the code does the opposite, which is against
its description.
In summary, the swap device is only opened exclusively by swsusp_check()
with its corresponding *close(), and must be in non test_resume mode.
This is to avoid the race condition that different processes scribble the
device at the same time. All the other cases should use non-exclusive mode.
Fix it by really disabling exclusive mode under test_resume.
Fixes: 5904de0d735b ("PM: hibernate: Do not get block device exclusively in test_resume mode")
Closes: https://lore.kernel.org/lkml/000000000000761f5f0603324129@google.com/
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Tested-by: Chenzhou Feng <chenzhoux.feng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Several functions reply on snapshot_test to decide whether to
open the resume device exclusively. However there is no strict
connection between the snapshot_test and the open mode. Rename
the 'snapshot_test' input parameter to 'exclusive' to better reflect
the use case.
No functional change is expected.
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Since commit 1202cdd66531("Remove DECnet support from kernel") has been
merged, all callers pass in the initial_ref value of 1 when they call
dst_alloc(). Therefore, remove initial_ref when the dst_alloc() is
declared and replace initial_ref with 1 in dst_alloc().
Also when all callers call dst_init(), the value of initial_ref is 1.
Therefore, remove the input parameter initial_ref of the dst_init() and
replace initial_ref with the value 1 in dst_init.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20230911125045.346390-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
