summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-02-08arm64: defconfig: enable Qualcomm SDAM nvmem driverJohan Hovold
The SDAM nvmem driver can be used to access the Shared Direct Access Memory Module registers in some Qualcomm PMICs. These registers can specifically be used to store a time offset on platforms where the PMIC RTC time registers are read-only in order to allow the RTC time to be updated. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230202155448.6715-19-johan+linaro@kernel.org
2023-02-08drm/amdgpu/smu: skip pptable init under sriovJane Jian
sriov does not need to init pptable from amdgpu driver we finish it from PF Signed-off-by: Jane Jian <Jane.Jian@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-08amd/amdgpu: remove test ib on hw ringJesseZhang
test ib function is not necessary on hw ring, so remove it. v2: squash in NULL check fix Signed-off-by: JesseZhang <Jesse.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-08drm/amdgpu/fence: Fix oops due to non-matching drm_sched init/finiGuilherme G. Piccoli
Currently amdgpu calls drm_sched_fini() from the fence driver sw fini routine - such function is expected to be called only after the respective init function - drm_sched_init() - was executed successfully. Happens that we faced a driver probe failure in the Steam Deck recently, and the function drm_sched_fini() was called even without its counter-part had been previously called, causing the following oops: amdgpu: probe of 0000:04:00.0 failed with error -110 BUG: kernel NULL pointer dereference, address: 0000000000000090 PGD 0 P4D 0 Oops: 0002 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 609 Comm: systemd-udevd Not tainted 6.2.0-rc3-gpiccoli #338 Hardware name: Valve Jupiter/Jupiter, BIOS F7A0113 11/04/2022 RIP: 0010:drm_sched_fini+0x84/0xa0 [gpu_sched] [...] Call Trace: <TASK> amdgpu_fence_driver_sw_fini+0xc8/0xd0 [amdgpu] amdgpu_device_fini_sw+0x2b/0x3b0 [amdgpu] amdgpu_driver_release_kms+0x16/0x30 [amdgpu] devm_drm_dev_init_release+0x49/0x70 [...] To prevent that, check if the drm_sched was properly initialized for a given ring before calling its fini counter-part. Notice ideally we'd use sched.ready for that; such field is set as the latest thing on drm_sched_init(). But amdgpu seems to "override" the meaning of such field - in the above oops for example, it was a GFX ring causing the crash, and the sched.ready field was set to true in the ring init routine, regardless of the state of the DRM scheduler. Hence, we ended-up using sched.ops as per Christian's suggestion [0], and also removed the no_scheduler check [1]. [0] https://lore.kernel.org/amd-gfx/984ee981-2906-0eaf-ccec-9f80975cb136@amd.com/ [1] https://lore.kernel.org/amd-gfx/cd0e2994-f85f-d837-609f-7056d5fb7231@amd.com/ Fixes: 067f44c8b459 ("drm/amdgpu: avoid over-handle of fence driver fini in s3 test (v2)") Suggested-by: Christian König <christian.koenig@amd.com> Cc: Guchun Chen <guchun.chen@amd.com> Cc: Luben Tuikov <luben.tuikov@amd.com> Cc: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-08ARM: dts: qcom: sdx55: correct TLMM gpio-rangesKrzysztof Kozlowski
Correct the number of GPIOs in TLMM pin controller. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230202104452.299048-9-krzysztof.kozlowski@linaro.org
2023-02-08drm/amd/pm/smu7: move variables to where they are usedAlex Deucher
Move variable declarations to where they are used. Fixes a segfault on smu7 V0 structures where some tables don't exist. Cc: Evan Quan <evan.quan@amd.com> Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2388 Fixes: b1a9557a7d00 ("drm/amd/pm: fulfill powerplay peak profiling mode shader/memory clock settings") Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-08scsi: ufs: core: Fix an error handling path in ufshcd_read_desc_param()Christophe JAILLET
If an error occurs, some memory may need to be freed, as in the other error handling paths. Before the commit in the Fixes tag, this test was done before the memory allocation, so there was no issue. Fixes: 16ed9d312b42 ("scsi: ufs: core: Remove ufshcd_map_desc_id_to_length()") Link: https://lore.kernel.org/r/2c6e42205e5ec22e5e8c7c85c6deb8fde31c74da.1673781835.git.christophe.jaillet@wanadoo.fr Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-02-08scsi: ufs: core: Fix device management cmd timeout flowMason Zhang
In the UFS error handling flow, the host will send a device management cmd (NOP OUT) to the device for link recovery. If this cmd times out and clearing the doorbell fails, ufshcd_wait_for_dev_cmd() will do nothing and return. hba->dev_cmd.complete struct is not set to NULL. When this happens, if cmd has been completed by device, then we will call complete() in __ufshcd_transfer_req_compl(). Because the complete struct is allocated on the stack, the following crash will occur: ipanic_die+0x24/0x38 [mrdump] die+0x344/0x748 arm64_notify_die+0x44/0x104 do_debug_exception+0x104/0x1e0 el1_dbg+0x38/0x54 el1_sync_handler+0x40/0x88 el1_sync+0x8c/0x140 queued_spin_lock_slowpath+0x2e4/0x3c0 __ufshcd_transfer_req_compl+0x3b0/0x1164 ufshcd_trc_handler+0x15c/0x308 ufshcd_host_reset_and_restore+0x54/0x260 ufshcd_reset_and_restore+0x28c/0x57c ufshcd_err_handler+0xeb8/0x1b6c process_one_work+0x288/0x964 worker_thread+0x4bc/0xc7c kthread+0x15c/0x264 ret_from_fork+0x10/0x30 Link: https://lore.kernel.org/r/20221216032532.1280-1-mason.zhang@mediatek.com Signed-off-by: Mason Zhang <Mason.Zhang@mediatek.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-02-08dt-bindings: arm: qcom: add the sa8775p-ride boardBartosz Golaszewski
Document the sa8775p SoC and its reference board: sa8775p-ride. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230201152038.203387-5-brgl@bgdev.pl
2023-02-08ARM: dts: qcom: apq8064: add second DSI host and PHYDmitry Baryshkov
Add second DSI host and PHY available on the APQ8064 platform. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230121091237.2734272-1-dmitry.baryshkov@linaro.org
2023-02-08ARM: dts: qcom: apq8060-dragonboard: align MPP pin node names with DT schemaKrzysztof Kozlowski
DT schema expects nodes ending with "pins: qcom-apq8060-dragonboard.dtb: mpps@50: cm3605-mpps-state: 'oneOf' conditional failed, one must be fixed: 'mpp5' does not match any of the regexes: '-pins$', 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230120174036.351937-1-krzysztof.kozlowski@linaro.org
2023-02-08arm64: dts: qcom: sm8350: fixup SDHCI interconnect argumentsKrzysztof Kozlowski
After switching interconnects to 2 cells, the SDHCI interconnects need to get one more argument. Fixes: 4f287e31ff5f ("arm64: dts: qcom: sm8350: Use 2 interconnect cells") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230119105434.51635-1-krzysztof.kozlowski@linaro.org
2023-02-08kunit: Add printf attribute to fail_current_test_implDavid Gow
Add the gnu_printf (__printf()) attribute to the kunit_fail_current_test() implementation in __kunit_fail_current_test_impl(). While it's not actually useful here, as this function is never called directly, it nevertheless was triggering -Wsuggest-attribute=format warnings, so we should add it to reduce the noise. Fixes: cc3ed2fe5c93 ("kunit: Add "hooks" to call into KUnit when it's built as a module") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: David Gow <davidgow@google.com> Reviewed-by: Rae Moar <rmoar@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-02-08selftests: Fix failing VXLAN VNI filtering testIdo Schimmel
iproute2 does not recognize the "group6" and "remote6" keywords. Fix by using "group" and "remote" instead. Before: # ./test_vxlan_vnifiltering.sh [...] Tests passed: 25 Tests failed: 2 After: # ./test_vxlan_vnifiltering.sh [...] Tests passed: 27 Tests failed: 0 Fixes: 3edf5f66c12a ("selftests: add new tests for vxlan vnifiltering") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Link: https://lore.kernel.org/r/20230207141819.256689-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-08samples/bpf: Add openat2() enter/exit tracepoint to syscall_tp sampleRong Tao
Commit fe3300897cbf("samples: bpf: fix syscall_tp due to unused syscall") added openat() syscall tracepoints. This patch adds support for openat2() as well. Signed-off-by: Rong Tao <rongtao@cestc.cn> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/tencent_9381CB1A158ED7ADD12C4406034E21A3AC07@qq.com
2023-02-08scsi: aic94xx: Add missing check for dma_map_single()Jiasheng Jiang
Add check for dma_map_single() and return error if it fails in order to avoid invalid DMA address. Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver") Link: https://lore.kernel.org/r/20230128110832.6792-1-jiasheng@iscas.ac.cn Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Reviewed-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-02-08scsi: smartpqi: Replace one-element array with flexible-array memberGustavo A. R. Silva
One-element arrays are deprecated, and we are replacing them with flexible array members instead. So, replace one-element array with flexible-array member in struct report_log_lun_list. This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy(). Link: https://lore.kernel.org/r/Y+LJz/r6+UeLqnV3@work Link: https://github.com/KSPP/linux/issues/79 Link: https://github.com/KSPP/linux/issues/204 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Acked-by: Don Brace <don.brace@microchip.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-02-08arm64: dts: qcom: sdm670: add interconnectsRichard Acayan
The interconnects for Snapdragon 670 can be controlled. Add their corresponding nodes in the device tree. Signed-off-by: Richard Acayan <mailingradian@gmail.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230201010020.84586-2-mailingradian@gmail.com
2023-02-08arm64: dts: qcom: sm8250: Add device tree for Xiaomi Mi Pad 5 ProJianhua Lu
Add support for Xiaomi Mi Pad 5 Pro, codename is xiaomi-elish. This commit brings support for: * ADSP/CDSP/SLPI/VENUS * Backlight * Battery fuel gauge * Framebuffer * PCIe0 * USB2.0 Signed-off-by: Jianhua Lu <lujianhua000@gmail.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230131123515.833-2-lujianhua000@gmail.com
2023-02-08arm64: dts: qcom: sa8540p-ride: Document i2c bussesAndrew Halaney
It isn't obvious in the current devicetree what is connected. Go ahead and document what's on the other end. Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Reviewed-by: Eric Chanudet <echanude@redhat.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230130154823.117542-2-ahalaney@redhat.com
2023-02-08arm64: dts: qcom: sa8540p-ride: Fix some i2c pinctrl settingsAndrew Halaney
Some of the pinctrl groups were invalid for the selected pins. Select the proper qup group to fix these warnings: [ 6.523566] sc8280xp-tlmm f100000.pinctrl: invalid group "gpio135" for function "qup15" [ 6.535042] sc8280xp-tlmm f100000.pinctrl: invalid group "gpio136" for function "qup15" [ 6.597536] sc8280xp-tlmm f100000.pinctrl: invalid group "gpio158" for function "qup15" [ 6.597544] sc8280xp-tlmm f100000.pinctrl: invalid group "gpio159" for function "qup15" [ 6.597991] sc8280xp-tlmm f100000.pinctrl: invalid group "gpio0" for function "qup15" [ 6.597996] sc8280xp-tlmm f100000.pinctrl: invalid group "gpio1" for function "qup15" Fixes: e073899ec3e1 ("arm64: dts: qcom: sa8540p-ride: add i2c nodes") Reviewed-by: Shazad Hussain <quic_shazhuss@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Brian Masney <bmasney@redhat.com> Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230130154823.117542-1-ahalaney@redhat.com
2023-02-08arm64: dts: qcom: sm8550: Fix the aoss_qmp node nameAbel Vesa
The proper name for it is power-management. Currently, with the node name being power-controller, the bindings check fails due to the property #power-domain-cells missing. Fixes: ffc50b2d3828 ("arm64: dts: qcom: Add base SM8550 dtsi") Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230127131441.1157679-1-abel.vesa@linaro.org
2023-02-08arm64: dts: qcom: sm8550-mtp: correct vdd-l5-l16-supplyKrzysztof Kozlowski
Fix typo in vdd-l5-l16 supply of qcom,pm8550-rpmh-regulators. Fixes: 71342fb91eae ("arm64: dts: qcom: Add base SM8550 MTP dts") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230127121843.349738-1-krzysztof.kozlowski@linaro.org
2023-02-08arm64: dts: qcom: sm8550: add specific SMMU compatibleKrzysztof Kozlowski
Generic SMMU compatibles are not allowed alone and we expect specific one. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230127115513.268843-1-krzysztof.kozlowski@linaro.org
2023-02-08arm64: dts: qcom: sm8450: align RPMh regulator nodes with bindingsKrzysztof Kozlowski
Device node names should be generic and bindings expect certain pattern for RPMh regulator nodes. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230127114347.235963-11-krzysztof.kozlowski@linaro.org
2023-02-08arm64: dts: qcom: sm8350: align RPMh regulator nodes with bindingsKrzysztof Kozlowski
Device node names should be generic and bindings expect certain pattern for RPMh regulator nodes. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230127114347.235963-10-krzysztof.kozlowski@linaro.org
2023-02-08arm64: dts: qcom: sm8250: align RPMh regulator nodes with bindingsKrzysztof Kozlowski
Device node names should be generic and bindings expect certain pattern for RPMh regulator nodes. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230127114347.235963-9-krzysztof.kozlowski@linaro.org
2023-02-08arm64: dts: qcom: sm8150: align RPMh regulator nodes with bindingsKrzysztof Kozlowski
Device node names should be generic and bindings expect certain pattern for RPMh regulator nodes. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230127114347.235963-8-krzysztof.kozlowski@linaro.org
2023-02-08arm64: dts: qcom: sm7225: align RPMh regulator nodes with bindingsKrzysztof Kozlowski
Device node names should be generic and bindings expect certain pattern for RPMh regulator nodes. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230127114347.235963-7-krzysztof.kozlowski@linaro.org
2023-02-08arm64: dts: qcom: sdm845: align RPMh regulator nodes with bindingsKrzysztof Kozlowski
Device node names should be generic and bindings expect certain pattern for RPMh regulator nodes. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230127114347.235963-6-krzysztof.kozlowski@linaro.org
2023-02-08arm64: dts: qcom: sc8280xp: align RPMh regulator nodes with bindingsKrzysztof Kozlowski
Device node names should be generic and bindings expect certain pattern for RPMh regulator nodes. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230127114347.235963-5-krzysztof.kozlowski@linaro.org
2023-02-08arm64: dts: qcom: sc7180: align RPMh regulator nodes with bindingsKrzysztof Kozlowski
Device node names should be generic and bindings expect certain pattern for RPMh regulator nodes. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230127114347.235963-4-krzysztof.kozlowski@linaro.org
2023-02-08arm64: dts: qcom: sa8295p-adp: align RPMh regulator nodes with bindingsKrzysztof Kozlowski
Device node names should be generic and bindings expect certain pattern for RPMh regulator nodes. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230127114347.235963-3-krzysztof.kozlowski@linaro.org
2023-02-08arm64: dts: qcom: sdm845-xiaomi-beryllium: Add reserved memory regionAmit Pundir
Put cont splash memory region under the reserved-memory as confirmed by the downstream code for both Tianma and EBBG variants. Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230127063355.1775246-1-amit.pundir@linaro.org
2023-02-08arm64: dts: qcom: sdm845-oneplus-*: add audio devicesCaleb Connolly
Populate the audio devices found on the OnePlus 6 and 6T using the sdm845-sndcard driver. Both devices have the earpiece and headphone jack connected to the WCD9341 codec. The OnePlus 6 uses the MAX98927 speaker codec which is already supported upstream. The OnePlus 6T uses a currently unsupported TFA9894 codec. Two internal microphones are supported, as well as an external headset mic. Each DAI link is expected to be used for a single device. Alsa UCM2 configs for this setup can be found here, they are not yet upstream and include support for call audio which is missing in this patch https://gitlab.com/sdm845-mainline/alsa-ucm-conf/-/tree/9ed12836b269764c4a853411d38ccb6abb70b383/ucm2/OnePlus Co-developed-by: Dylan Van Assche <me@dylanvanassche.be> Signed-off-by: Dylan Van Assche <me@dylanvanassche.be> Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230125231829.2621768-1-caleb.connolly@linaro.org
2023-02-08arm64: dts: qcom: sdm845-audio-wcd9340: commonize clocksKrzysztof Kozlowski
Clock for WCD9340 is coming from the SoC and is the same in all users, so move it to common file to reduce the code duplication (which still allows further customizations per board). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230123084300.22353-6-krzysztof.kozlowski@linaro.org
2023-02-08arm64: dts: qcom: sdm845-audio-wcd9340: commonize pinctrlKrzysztof Kozlowski
Pin configuration fow WCD9340 is the same in all users, so move it to common file to reduce the code duplication (which still allows further customizations per board). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230123084300.22353-5-krzysztof.kozlowski@linaro.org
2023-02-08arm64: dts: qcom: sdm845: move codec to separate fileKrzysztof Kozlowski
Re-organize SDM845 audio codec into separate, audio DTSI which should be included and customized by the SDM845 boards wanting audio. The codec node is anyway not a property of the SoC, but the boards. On all others boards not using audio, keep the Slimbus node disabled as it is empty. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230123084300.22353-4-krzysztof.kozlowski@linaro.org
2023-02-08arm64: dts: qcom: sdm850-lenovo-yoga: correct sound compatibleKrzysztof Kozlowski
There is dedicated compatible for Lenovo Yoga C630 sound card (documented in bindings and used by Linux driver), so use it along with a generic sound card fallback. The device is actually fully compatible with the generic one. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230123084300.22353-3-krzysztof.kozlowski@linaro.org
2023-02-08arm64: dts: qcom: sdm845-xiaomi-beryllium: add generic sound compatibleKrzysztof Kozlowski
Use generic sound card fallback compatible, because the device is actually fully compatible with the generic one. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230123084300.22353-2-krzysztof.kozlowski@linaro.org
2023-02-08arm64: dts: qcom: sdm845-db845c: add generic sound compatibleKrzysztof Kozlowski
Use generic sound card fallback compatible, because the device is actually fully compatible with the generic one. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230123084300.22353-1-krzysztof.kozlowski@linaro.org
2023-02-08scsi: mpt3sas: Fix a memory leakTomas Henzl
Add a forgotten kfree(). Fixes: dbec4c9040ed ("scsi: mpt3sas: lockless command submission") Link: https://lore.kernel.org/r/20230207152159.18627-1-thenzl@redhat.com Signed-off-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-02-08Merge branch 'md-next' of ↵Jens Axboe
https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-6.3/block Pull MD fix from Song: "This commit fixes a rare crash during the takeover process." * 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md: md: account io_acct_set usage with active_io
2023-02-08scsi: qla2xxx: Remove the unused variable wwnJiapeng Chong
Variable wwn is not used. Delete it. drivers/scsi/qla2xxx/qla_init.c:1657:6: warning: variable 'wwn' set but not used. Link: https://lore.kernel.org/r/20230207052234.24535-1-jiapeng.chong@linux.alibaba.com Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-02-08arm64: dts: qcom: sm8250: Disable wsamacro and swr0 by defaultKonrad Dybcio
They are not used on all boards, so disable them by default. Enable them back on MTP/RB5, which were the only current users. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230124164616.228619-1-konrad.dybcio@linaro.org
2023-02-08arm64: dts: qcom: sm8550: drop incorrect cells from serialKrzysztof Kozlowski
The serial/UART device node does not have children with unit addresses, so address/size cells are not correct. Fixes: 377972ac743f ("arm64: dts: qcom: sm8550: add I2C Master Hub nodes") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230124084951.38195-4-krzysztof.kozlowski@linaro.org
2023-02-08arm64: dts: qcom: sm8450: drop incorrect cells from serialKrzysztof Kozlowski
The serial/UART device node does not have children with unit addresses, so address/size cells are not correct. Fixes: f5837418479a ("arm64: dts: qcom: sm8450: add uart20 node") Fixes: 5188049c9b36 ("arm64: dts: qcom: Add base SM8450 DTSI") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230124084951.38195-3-krzysztof.kozlowski@linaro.org
2023-02-08arm64: dts: qcom: sm8350: drop incorrect cells from serialKrzysztof Kozlowski
The serial/UART device node does not have children with unit addresses, so address/size cells are not correct. Fixes: cf03cd7e12bd ("arm64: dts: qcom: sm8350: Set up WRAP0 QUPs") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230124084951.38195-2-krzysztof.kozlowski@linaro.org
2023-02-08arm64: dts: qcom: use generic node name for BluetoothKrzysztof Kozlowski
Node names should be generic (as Devicetree spec mandates), so use "bluetooth" for BT node. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230124084951.38195-1-krzysztof.kozlowski@linaro.org
2023-02-08arm64: dts: qcom: sm8450: Fix DSIn PHY compatibleKonrad Dybcio
Use the correct compatible so that the driver can probe properly. Fixes: a6dd1206e45a ("arm64: dts: qcom: sm8450: add display hardware devices") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on HDK8450 Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230123200552.553181-1-konrad.dybcio@linaro.org
generated by cgit (git 2.34.1) at 2025-09-24 10:51:37 +0000