summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-06-18ARM: AM33XX: clock: Add debugSS clock nodesVaibhav Hiremath
Represent debugSS clock interface as provided in CM_WKUP_DEBUGSS_CLKCTRL register, includes - Clock gate for optional DEBUG_CLKA and DBGSYSCLK - Clock Mux for TRC_PMD and STM_PMD - Clock divider for STM and TPIU Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: OMAP5: Add Palmas MFD node and regulator nodesJ Keerthy
Add Palmas MFD node and the regulator nodes for OMAP5. The node definitions are based on: https://lkml.org/lkml/2013/6/6/25 Boot tested on omap5-uevm board. Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: J Keerthy <j-keerthy@ti.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evmskPhilip Avinash
PWM output from ecap2 uses as backlight source. Also adds low threshold value to have a uniform divisions in brightness-levels scales with inverse polarity. Signed-off-by: Philip Avinash <avinashphilip@ti.com> Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evmPhilip Avinash
PWM output from ecap0 uses as backlight source. Also adds low threshold value to have a uniform divisions in brightness-levels scales. Signed-off-by: Philip Avinash <avinashphilip@ti.com> Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: AM33XX: Add PWMSS device tree nodesPhilip Avinash
Add PWMSS device tree nodes in relation with ECAP & EHRPWM DT nodes to AM33XX SoC family. Also populates device tree nodes for ECAP & EHRPWM by adding necessary properties like pwm-cells, base reg & set disabled as status. Signed-off-by: Philip Avinash <avinashphilip@ti.com> Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: OMAP4460: Add bandgap entry for OMAP4460 devicesEduardo Valentin
Add bandgap devices for OMAP4460 devices. Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: OMAP443x: Add bandgap entry for OMAP443x devicesEduardo Valentin
Add the bandgap entry for OMAP4430 devices. Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> [benoit.cousson@linaro.org: Add blank line and fix reg presentation] Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: TWL4030: fix mux and wakeup for SYS_NIRQ lineKevin Hilman
On most OMAP3 platforms, the twl4030 IRQ line is connected to the SYS_NIRQ line on OMAP. Add another DTS include file (twl4030_omap3.dtsi) for boards that hook up the twl4030 this way to include. This allows RTC wake from off-mode to work again on OMAP3-based platforms with twl4030. Tested on 3530/Beagle, 3730/Beagle-xM, 3530/Overo, 3730/Overo-STORM. Special thanks to Florian Vaussard for suggesting use of preprocessor feature. Cc: Florian Vaussard <florian.vaussard@epfl.ch> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: OMAP3: beagle: enable user button via gpio_keys, enable wakeupKevin Hilman
Using the gpio-keys bindings, configure the user button on Beagle boards. Since the user button is enabled as a wakeup source, also ensure the GPIO pin is mux'd correctly and has IO ring wakeups enabled, so it can also wakeup from off mode. Special thanks to Florian Vaussard for suggesting the preprocessor feature. Cc: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: OMAP3: beagle/overo: mux console UART, enable wakeupKevin Hilman
Ensure the console uart (UART3) on these boards is mux'd correctly, and IO ring wakeup is enabled. This is needed for serial console wakeups when using DT boot. Thanks to Florian Vaussard for suggestion to use preprocessor features. Cc: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: omap5-uevm: Add uart pinctrl dataSourav Poddar
Booting omap5 uevm results in the following error "did not get pins for uart error: -19" This happens because omap5 uevm dts file is not adapted to use uart through pinctrl framework. Populate uart pinctrl data to get rid of the error. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> [r.sricharan@ti.com: Replaced constants with preprocessor macros] Signed-off-by: Sricharan R <r.sricharan@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: omap5-uevm: Add LED support for uEVM blue LEDDan Murphy
Add support for blue LED 1 off of GPIO 153. Make the LED a heartbeat LED Configure the MUX for GPIO output. Signed-off-by: Dan Murphy <dmurphy@ti.com> [r.sricharan@ti.com: Replaced constants with preprocessor macros] Signed-off-by: Sricharan R <r.sricharan@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: omap5-uevm: Add USB Host supportRoger Quadros
Provide the RESET regulators for the USB PHYs, the USB Host port modes and the PHY devices. Also provide pin multiplexer information for the USB host pins. Signed-off-by: Roger Quadros <rogerq@ti.com> [r.sricharan@ti.com: Replaced constants with preprocessor macros] Signed-off-by: Sricharan R <r.sricharan@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: omap5: Make uevm as the official board and deprecate sevm supportSricharan R
The uevm is the only official board supported for the OMAP5 soc in mainline. The existent sevm platform will no more be supported. Hence cleaning up the board dts file to have only the data required for uevm. Renaming the board dts file and adding the following cleanups. * There are no devices connected on I2C 2,3,4 buses. So remove the pinmux data for the same. * OMAP5432 and DDR3 memory is used in the uevm. Temperature polling is not supported with DDR3 memories. Because of DDR3 phy limitation the voltage change across DVFS and all shadow registers for DVFS on DDR3 is not supported. Hence the emif kernel driver is not required, so removing the DDR3 device file and emif nodes for uevm. * Keypad is not supported on uevm. So remove the device node. Signed-off-by: Sricharan R <r.sricharan@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: OMAP4/AM35xx: Add missing dtb in the dtbs targetFlorian Vaussard
When making the dtbs target on OMAP/AM35xx, some trees are not built. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: AM33XX: Use pinctrl constantsFlorian Vaussard
Using constants for pinctrl allows a better readability, and removes redundancy with comments. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Tested-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: AM33XX: Specific pinctrl headerFlorian Vaussard
The pinctrl IP inside the AM33XX family differs slightly from what is found on OMAP2+. Define a specific header to take account of the differences. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Tested-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: AM33XX: Use existing constants for GPIOsFlorian Vaussard
Use standard GPIO constants to enhance the readability of DT GPIOs. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Tested-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: AM3XXX: Use #include for all device treesFlorian Vaussard
Replace /include/ by #include for AM33XX and AM35XX device tree files, in order to use the C pre-processor, making use of #define features possible. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Tested-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: AM43x: Initial supportAfzal Mohammed
DT source (minimal) for AM4372 SoC to represent AM43x SoC's. Those represented here are the minimal DT nodes necessary to get kernel booting. In DT nodes, "ti,hwmod" property has not been added, this would be added along with PRCM support for AM43x. Signed-off-by: Ankur Kishore <a-kishore@ti.com> Signed-off-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: omap4-panda: Update the twl6040 gpio to macro definitionDan Murphy
Update the dt property ti,audpwron-gpio to use the gpio macro definition for GPIO_ACTIVE_HIGH. Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: omap4-panda: Update the LED support for the pandaDan Murphy
The GPIO for LED D1 on the omap4-panda a1-a3 rev and the omap4-panda-es are different. A1-A3 = gpio_wk7 ES = gpio_110 There is no change to LED D2 Abstract away the pinmux and the LED definitions for the two boards into the respective DTS files. Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: OMAP2+: Use pinctrl constantsFlorian Vaussard
Using constants for pinctrl allows a better readability, and removes redundancy with comments. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: OMAP2+: Header file for pinctrl constantsFlorian Vaussard
Most of the constants are taken from arch/arm/mach-omap2/mux.h. Define some others for the PIN_OUTPUT_* flavours. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: OMAP4/5: Use existing constants for IRQsFlorian Vaussard
Use the constants defined in include/dt-bindings/interrupt-controller/ to enhance readability. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: OMAP2+: Use existing constants for GPIOsFlorian Vaussard
Use standard GPIO constants to enhance the readability of DT GPIOs. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: OMAP2+: Use #include for all device treesFlorian Vaussard
Replace /include/ by #include for OMAP2+ DT, in order to use the C pre-processor, making use of #define features possible. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: AM33XX: Add NAND flash device tree data to am335x-evmPhilip Avinash
GPMC controller on AM335x-EVM has a NAND flash connected to it. This patch updates following in am335x-evm.dts: - adds nandflash specific pin-mux configs - adds nand node as child of GPMC contoller, with information about NAND flash interface, NAND partition table, ECC scheme, elm handle id. - updates GPMC node for newer GPMC DT properties added in linux-3.10. Signed-off-by: Philip Avinash <avinashphilip@ti.com> Signed-off-by: Gupta, Pekon <pekon@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: AM33XX: Add ELM nodePhilip, Avinash
ELM hardware engine is used for locating bit-flips in NAND data This patch is required for working of hardware based NAND ECC schemes with DT support. Signed-off-by: Philip Avinash <avinashphilip@ti.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Pekon Gupta <pekon@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: omap3-igep0030: Add NAND flash supportJavier Martinez Canillas
The IGEP COM Module has an 512MB NAND flash memory. Add a device node for this NAND and its partition layout. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: omap3-igep0020: Add NAND flash supportJavier Martinez Canillas
The IGEPv2 board has an 512MB NAND flash memory. Add a device node for this NAND and its partition layout. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: omap3-igep0020: Add SMSC911x LAN chip supportJavier Martinez Canillas
The IGEPv2 board has an SMSC LAN9221i ethernet chip connected to the OMAP3 processor though the General-Purpose Memory Controller. This patch adds a device node for the ethernet chip as a GPMC child and all its dependencies (regulators, GPIO and pin muxs). Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: AM33XX: Set pinmux for clkout2 pad used for clock outputVaibhav Hiremath
xdma_event_intr1.clkout2 pad can be used to source clock from either 32K OSC or any of the PLL (except MPU) outputs. On the existing AM335x based boards (EVM, EVM-SK and Bone), this pad is used to feed the clock to audio codes. So, this patch configures the pinmux to get clkout2 on the pad. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: AM33XX: Add default pinctrl binding for UART0 deviceVaibhav Hiremath
Add pin control binding for UART0 device nodes in all board specific DT files. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Matt Porter <mporter@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: AM33XX: Fix uart numbering to match hardware/TRMVaibhav Hiremath
With DT support, where naming convention is based on base-addr and not id, so we should follow TRM/Spec numbering label. This patch changes UART numbering as per TRM, as uart0-5. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Matt Porter <mporter@ti.com> Cc: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: AM33XX: Add pinctrl binding to gpio-leds nodeVaibhav Hiremath
Now gpio-leds driver is using devm_pinctrl_get_select_default() api to set default pinmux configuration required for the functionality of the driver, so this patch moves respective pinctrl binding inside leds node. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: AM33XX: Add default pinctrl binding for I2C deviceVaibhav Hiremath
Add pin control binding for I2C device nodes in all board specific DT files (as per current usage), EVM: Both i2c0 and i2c1 EVM-SK and Bone: Only i2c0 Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Matt Porter <mporter@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: OMAP4+: Remove multimedia carveoutsSuman Anna
The carveouts that have been reserved for multimedia usecases are not being used currently by any driver and so have been cleaned up. Memory will be allocated runtime through CMA for enabling the multimedia usecases. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18UIO: fix uio_pdrv_genirq with device tree but no interruptPavel Machek
If device is initialized from device tree, but has no interrupt assigned, uio will still try to request and interrupt old way, fails, and fails registration. This is wrong; don't try initializing irq using platform data if device tree is available. Simplified code based on suggestion by Grant Likely. Fixed memory leak in "irq can not be registered" error path. Signed-off-by: Pavel Machek <pavel@denx.de> Reported-by: Detlev Zundel <dzu@denx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-18UIO: allow binding uio_pdrv_genirq.c to devices using command line optionPavel Machek
This adds ability to bind uio driver to given open firmware device using command line option. Thus, userspace driver can be developed and used without modifying the kernel. Signed-off-by: Pavel Machek <pavel@denx.de> Tested-by: Detlev Zundel <dzu@denx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-18FMC: add a char-device mezzanine driverAlessandro Rubini
This driver exports the memory area associated with the mezzanine card as a misc device, so users can access registers. Signed-off-by: Alessandro Rubini <rubini@gnudd.com> Acked-by: Juan David Gonzalez Cobas <dcobas@cern.ch> Acked-by: Emilio G. Cota <cota@braap.org> Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-18FMC: add a driver to write mezzanine EEPROMAlessandro Rubini
This driver allows to reprogram the EEPROM in a mezzanine, to store its own identifiers during manufacturing or to save other useful data. Signed-off-by: Alessandro Rubini <rubini@gnudd.com> Acked-by: Juan David Gonzalez Cobas <dcobas@cern.ch> Acked-by: Emilio G. Cota <cota@braap.org> Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-18FMC: add a software mezzanine driverAlessandro Rubini
This simple do-nothing mezzanine driver shows how to write a mezzanine driver, that can also handle interrupts reported by the carrier. Signed-off-by: Alessandro Rubini <rubini@gnudd.com> Acked-by: Juan David Gonzalez Cobas <dcobas@cern.ch> Acked-by: Emilio G. Cota <cota@braap.org> Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-18FMC: add a software carrier driverAlessandro Rubini
This fake carrier is designed to help FMC users understand how a carrier driver works, and to experiment the behaviour with EEPROM reprogramming (with a mezzanine driver commited later). This carrier can register up to 4 (fake) mezzanines. We have real carriers (both on PCI-E and VME), but they are bigger things and are not part of this submission. Signed-off-by: Alessandro Rubini <rubini@gnudd.com> Acked-by: Juan David Gonzalez Cobas <dcobas@cern.ch> Acked-by: Emilio G. Cota <cota@braap.org> Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-18FMC: add documentation for the coreAlessandro Rubini
This is selected sections of the current manual for fmc-bus, as developed outside of the kernel before submission. Like the other patches in this set, it corresponds to commit ab23167f of the repository at ohwr.org Signed-off-by: Alessandro Rubini <rubini@gnudd.com> Acked-by: Juan David Gonzalez Cobas <dcobas@cern.ch> Acked-by: Emilio G. Cota <cota@braap.org> Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Acked-by: Rob Landley <rob@landley.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-18FMC: add core bus driverAlessandro Rubini
This module offers registration services for both carriers (i.e. devices) and mezzanines (i.e. drivers). The matching for devices and drivers is performed according to the IPMI standard for FRU devices (Field Replaceable Units). The code includes support for parsing an SDB tree if present in the FPGA, and dumping it for diagnostics. SDB is not mandatory. Files in this commit correspond to commit ab23167f in the master branch of the project hosted on ohwr.org. Signed-off-by: Alessandro Rubini <rubini@gnudd.com> Acked-by: Juan David Gonzalez Cobas <dcobas@cern.ch> Acked-by: Emilio G. Cota <cota@braap.org> Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-18MAINTAINERS: add stable_kernel_rules.txt to stable maintainer informationGreg Kroah-Hartman
This hopefully will help point developers to the proper way that patches should be submitted for inclusion in the stable kernel releases. Reported-by: David Howells <dhowells@redhat.com> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-18x86: fix build error and kconfig for ia32_emulation and binfmtRandy Dunlap
Fix kconfig warning and build errors on x86_64 by selecting BINFMT_ELF when COMPAT_BINFMT_ELF is being selected. warning: (IA32_EMULATION) selects COMPAT_BINFMT_ELF which has unmet direct dependencies (COMPAT && BINFMT_ELF) fs/built-in.o: In function `elf_core_dump': compat_binfmt_elf.c:(.text+0x3e093): undefined reference to `elf_core_extra_phdrs' compat_binfmt_elf.c:(.text+0x3ebcd): undefined reference to `elf_core_extra_data_size' compat_binfmt_elf.c:(.text+0x3eddd): undefined reference to `elf_core_write_extra_phdrs' compat_binfmt_elf.c:(.text+0x3f004): undefined reference to `elf_core_write_extra_data' [ hpa: This was sent to me for -next but it is a low risk build fix ] Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: http://lkml.kernel.org/r/51C0B614.5000708@infradead.org Cc: <stable@vger.kernel.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-06-18Merge branch 'for-rmk/arch-timer-cleanups' of git://linux-arm.org/linux-mr ↵Russell King
into devel-stable Please pull these arch_timer cleanups I've been holding onto for a while. They're the same as my last posting [1], but have been rebased to v3.10-rc3. [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2013-May/170602.html -- Mark Rutland
2013-06-18Merge branch 'for-rmk/lpae' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into devel-stable Conflicts: arch/arm/kernel/smp.c Please pull these miscellaneous LPAE fixes I've been collecting for a while now for 3.11. They've been tested and reviewed by quite a few people, and most of the patches are pretty trivial. -- Will Deacon.
generated by cgit (git 2.34.1) at 2025-09-16 09:12:05 +0000