| Age | Commit message (Collapse) | Author |
|---|
|
This moves device tree parsing to its own function so more stuff can
be cleanly added in the future.
Signed-off-by: Leon Romanovsky <leon@leon.nu>
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Tegra has been converted to support device tree only. Remove support
for instantiating via platform device.
Signed-off-by: Leon Romanovsky <leon@leon.nu>
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixed a coding style issue.
Signed-off-by: John B. Wyatt IV <sageofredondo@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The SCmdLinkStatus struct has a couple holes. There is one between
->bLink and ->wBSSType, and another between ->abySSID and ->uChannel.
I've added a memset() to initialize the struct to zero. Since we don't
need to clear abySSID any more so I've removed that memset. It was
wrong anyway: abySSID has "SSID_MAXLEN + 2" (34) bytes, not
"WLAN_SSID_MAXLEN + 1" (33).
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
I screwed up the sense of this if() statement while porting our
vendor driver to create the dwc2 driver. This caused frame overrun
errors on periodic transfers when there were other transfers
active in the same (micro)frame.
With this fix, the dwc2 driver now works on the Raspberry Pi
platform even with the USB Ethernet controller enabled, where
before that would cause all USB devices to stop working.
Thanks to Ray Jui and Jerry Lin at Broadcom for tracking this down.
Reported-by: Ray Jui <rjui@broadcom.com>
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Correct spelling typo in printk.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix "with with" in debug message.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Collect "be be" in dev_err messages.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
__sync_fetch_and_and and __sync_fetch_and_or are functions that are provided
by gcc and depending on the target architecture may be implemented in libgcc,
which is not always available in the kernel. This leads to a build failure
on ARMv5:
drivers/built-in.o: In function `line6_pcm_release':
:(.text+0x3bfe80): undefined reference to `__sync_fetch_and_and_4'
drivers/built-in.o: In function `line6_pcm_acquire':
:(.text+0x3bff30): undefined reference to `__sync_fetch_and_or_4'
To work around this, we can use the kernel-provided cmpxchg macro.
Build-tested only.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Markus Grabner <grabner@icg.tugraz.at>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 30dcf76acc69 "libata: migrate ACPI code over to new bindings"
mistakenly dropped the code to register hotplug notificaion handler
for ATA port/devices, causing regression for people using ATA bay,
as kernel bug #59871 shows.
Fix this by adding back the hotplug notification handler registration
code. Since this code has to be run once and notification needs to
be installed on every ATA port/devices handle no matter if there is
actual device attached, we can't do this in binding time for ATA
device ACPI handle, as the binding only occurs when a SCSI device is
created, i.e. there is device attached. So introduce the
ata_acpi_hotplug_init() function to loop scan all ATA ACPI handles
and if it is available, install the notificaion handler for it during
ATA init time.
With the ATA ACPI handle binding to SCSI device tree, it is possible
now that when the SCSI hotplug work removes the SCSI device, the ACPI
unbind function will find that the corresponding ACPI device has
already been deleted by dock driver, causing a scaring message like:
[ 128.263966] scsi 4:0:0:0: Oops, 'acpi_handle' corrupt
Fix this by waiting for SCSI hotplug task finish in our notificaion
handler, so that the removal of ACPI device done in ACPI unbind
function triggered by the removal of SCSI device is run earlier when
ACPI device is still available.
[rjw: Rebased]
References: https://bugzilla.kernel.org/show_bug.cgi?id=59871
Reported-bisected-and-tested-by: Dirk Griesbach <spamthis@freenet.de>
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: 3.6+ <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Rename a couple private functions so they have the same namespace
as the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Returning 0 for success is more common.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This is just added noise. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
As suggested by the CodingStyle.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove all the unused #define's and add namespace to the ones that
are used.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use the pcmuio_{read,write}() helpers to read/write all 24 channels
instead of handling the digital I/O as three separate ports. This
simplifies both functions with minimal overhead.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Introduce a helper function to handle reading a 24-bit value from the
three 8-bit registers associated with a "port" or "page".
Simplify the for() loop in pcmuio_handle_asic_interrupt() that finds
which channels have triggered the interrupt.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Only subdevices 0 and 2 support interrupts. Simplify the attach
a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The 'asic' and 'port' associated with a given subdevice can easily be
found based on the subdevice 'index'. With that information we can
then calculate the correct iobase and register offset needed to read/
write the 8-bit ports.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
It's simple enough to calculate the iobase when needed. Remove this
member from the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The number of subdevices needed by the driver is based on the
'num_asics' reported by the boardinfo and each subdevice always
has 24 channels. Simplify the attach a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
These members of the boardinfo are not used by the driver. Remove
them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The 'subpriv' pointer is kzalloc'ed during the attach.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This member of the subdevice private data is always initialize to
'0' due to the 'thisasic_chanct' always being zero when it is set
during the attach. Simplify the driver a bit by removing it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This member of the subdevice private data is always initialize to
s->n_chan if the subdevice supports interrupts and is only used
in functions that can be called by the interrupt subdevice.
Simplyfy the driver a bit by removing it and just using s->n_chan.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This member of the subdevice private data is always initialize to
'0' due to the 'byte_no' always being zero when it is set during
the attach. Simplify the driver a bit by removing it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
These members of the private data are either not referenced or are set
but never used by the driver. Remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Introduce a helper function to handle writing a 24-bit value to the
three 8-bit registers associated with a "port" or "page".
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
All the I/O ports are left unlocked in the driver so the 'pagelock'
in the private data is not necessary. The paranoia sanity checks
are also unnecessary, Remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add namespace to the register map defines. Gather them together
and tidy them up a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
These functions are #ifdef'ed out and not needed in the driver.
Just remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
As suggested by Ian Abbott, comedi_set_spriv() can only be used to
set the subdevice->private pointer to something that can be kfree()'d.
Rename the function to comedi_alloc_spriv() and have it kzalloc() the
memory as well as set the private pointer. This saves a function call
in the drivers and avoids the possibility of incorrectly calling
comedi_set_spriv() for some pointer that is not meant to be kfree()'d.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
for_each_subsys() walks over subsystems attached to a hierarchy and
we're gonna add iterators which walk over all available subsystems.
Rename for_each_subsys() to for_each_root_subsys() so that it's more
appropriately named and for_each_subsys() can be used to iterate all
subsystems.
While at it, remove unnecessary underbar prefix from macro arguments,
put them inside parentheses, and adjust indentation for the two
for_each_*() macros.
This patch is purely cosmetic.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
|
|
find_css_set() passes uninitialized on-stack template[] array to
find_existing_css_set() which sets the entries for all subsystems.
Passing around an uninitialized array is a bit icky and we want to
introduce an iterator which only iterates loaded subsystems. Let's
initialize it on definition.
While at it, also make the following cosmetic cleanups.
* Convert to proper /** comments.
* Reorder variable declarations.
* Replace comment on synchronization with lockdep_assert_held().
This patch doesn't make any functional differences.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
|
|
cgroup curiously has two subsystem masks, ->subsys_mask and
->actual_subsys_mask. The latter only exists because the new target
subsys_mask is passed into rebind_subsystems() via @root>subsys_mask.
rebind_subsystems() needs to know what the current mask is to decide
how to reach the target mask so ->actual_subsys_mask is used as the
temp location to remember the current state.
Adding a temporary field to a permanent data structure is rather silly
and can be misleading. Update rebind_subsystems() to take @added_mask
and @removed_mask instead and remove @root->actual_subsys_mask.
This patch shouldn't introduce any behavior changes.
v2: Comment and description updated as suggested by Li.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
|
|
Global variable names in kernel/cgroup.c are asking for trouble -
subsys, roots, rootnode and so on. Rename them to have "cgroup_"
prefix.
* s/subsys/cgroup_subsys/
* s/rootnode/cgroup_dummy_root/
* s/dummytop/cgroup_cummy_top/
* s/roots/cgroup_roots/
* s/root_count/cgroup_root_count/
This patch is purely cosmetic.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
|
|
Purely cosmetic.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
|
|
We want the USB fixes and other good stuff in this branch as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We want the tty fixes in this branch as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We want the firmware merge fixes, and other bits, in here now.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The following commit caused a fatal oops when booting on mpc83xx with
a non-express PCI bus (regardless of whether a PCI device is present):
commit 50d8f87d2b39313dae9d0a2d9b23d377328f2f7b
Author: Rojhalat Ibrahim <imr@rtschenk.de>
Date: Mon Apr 8 10:15:28 2013 +0200
powerpc/fsl-pci Make PCIe hotplug work with Freescale PCIe controllers
Up to now the PCIe link status on Freescale PCIe controllers was only
checked once at boot time. So hotplug did not work. With this patch the
link status is checked on every config read. PCIe devices not present at
boot time are found after doing 'echo 1 >/sys/bus/pci/rescan'.
Signed-off-by: Rojhalat Ibrahim <imr@rtschenk.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
This patch fixes the issue by calling setup_indirect_pci for all device types.
fsl_indirect_read_config is now only used for booke/86xx PCIe controllers.
Reported-by: Michael Guntsche <mike@it-loops.com>
Cc: Scott Wood <scottwood@freescale.com>
Signed-off-by: Rojhalat Ibrahim <imr@rtschenk.de>
Signed-off-by: Scott Wood <scottwood@freescale.com>
|
|
Move the existing clock code in mach-msm to the common clock
framework. We lose our capability to set the rate of and enable a
clock through debugfs. This is ok though because the debugfs
features are mainly used for testing and development of new clock
code.
To maintain compatibility with the original MSM clock code we
make a wrapper for clk_reset() that calls the struct msm_clk
specific reset function. This is necessary for the usb and sdcc
devices on MSM until a better suited API is made available.
Cc: Saravana Kannan <skannan@codeaurora.org>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
|
|
To move closer to the generic struct clock framework move the
proc_comm based clock code to a platform driver. The data
describing the struct clks still live in the devices-$ARCH file,
but the clock initialization is done at driver binding time.
Cc: Saravana Kannan <skannan@codeaurora.org>
Reviewed-by: Pankaj Jangra <jangra.pankaj9@gmail.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
|
|
In the near future we'll be moving clock-pcom to a platform
driver, in which case these two users of clk_get() in mach-msm
need to be updated. Have board-trout-panel.c make the proc_comm
call directly so that we don't have to port this board specific
code to the driver right now and reorder the initcall order of
dma.c so that it initializes after the clock driver probes but
before any drivers use dma APIs.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
|
|
This file is not used outside of the two users in the clock-7x30
array. Those two clocks are virtual "source" clocks that don't
really need to exist outside of the clock driver. Let's remove
them from the array, since they're not doing anything anyway, and
then remove the clock-7x30.h include file along with it.
Cc: Saravana Kannan <skannan@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
|
|
There are no users of this API anymore so let's just remove it.
If a need arises in the future we can extend the common clock API
to handle it.
Acked-by: Saravana Kannan <skannan@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
|
|
Nobody is using this API upstream and it's just contributing
cruft. Remove it so the MSM clock API is closer to the generic
struct clock API.
Acked-by: Saravana Kannan <skannan@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
|
|
Calling clk_set_min_rate() is no better than just calling
clk_set_rate() because MSM clock code already takes care of
calling the min_rate ops if the clock really needs
clk_set_min_rate() called on it.
Cc: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
|
|
Add calls to clk_prepare and unprepare so that MSM can migrate to
the common clock framework. We never unprepare the clocks until
driver remove because the clocks are enabled and disabled in irq
context. Finer grained power management is possible in the future
via runtime power management techniques.
Cc: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
|
|
Add calls to clk_prepare and unprepare so that MSM can migrate to
the common clock framework.
Cc: Chris Ball <cjb@laptop.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
|
