summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-05-10sfc: Do not attempt to flush queues if DMA is disabledStuart Hodgson
efx_nic_fatal_interrupt() disables DMA before scheduling a reset. After this, we need not and *cannot* flush queues. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-05-09dsa: Convert compare_ether_addr to ether_addr_equalJoe Perches
Use the new bool function ether_addr_equal to add some clarity and reduce the likelihood for misuse of compare_ether_addr for sorting. Done via cocci script: $ cat compare_ether_addr.cocci @@ expression a,b; @@ - !compare_ether_addr(a, b) + ether_addr_equal(a, b) @@ expression a,b; @@ - compare_ether_addr(a, b) + !ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) == 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) != 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) == 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) != 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !!ether_addr_equal(a, b) + ether_addr_equal(a, b) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-09wireless: Convert compare_ether_addr to ether_addr_equal by handJoe Perches
spatch/coccinelle isn't perfect. It doesn't understand __aligned(x) and doesn't convert functions it can't parse. Convert the remaining compare_ether_addr uses. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-09wireless: Convert compare_ether_addr to ether_addr_equalJoe Perches
Use the new bool function ether_addr_equal to add some clarity and reduce the likelihood for misuse of compare_ether_addr for sorting. I removed a conversion from scan.c/cmp_bss_core that appears to be a sorting function. Done via cocci script: $ cat compare_ether_addr.cocci @@ expression a,b; @@ - !compare_ether_addr(a, b) + ether_addr_equal(a, b) @@ expression a,b; @@ - compare_ether_addr(a, b) + !ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) == 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) != 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) == 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) != 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !!ether_addr_equal(a, b) + ether_addr_equal(a, b) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-09netfilter: Convert compare_ether_addr to ether_addr_equalJoe Perches
Use the new bool function ether_addr_equal to add some clarity and reduce the likelihood for misuse of compare_ether_addr for sorting. Done via cocci script: $ cat compare_ether_addr.cocci @@ expression a,b; @@ - !compare_ether_addr(a, b) + ether_addr_equal(a, b) @@ expression a,b; @@ - compare_ether_addr(a, b) + !ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) == 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) != 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) == 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) != 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !!ether_addr_equal(a, b) + ether_addr_equal(a, b) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-09mac80211: Convert compare_ether_addr to ether_addr_equal by handJoe Perches
spatch/coccinelle isn't perfect. It doesn't understand __aligned(x) and doesn't convert functions it can't parse. Convert the remaining compare_ether_addr uses. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-09mac80211: Convert compare_ether_addr to ether_addr_equalJoe Perches
Use the new bool function ether_addr_equal to add some clarity and reduce the likelihood for misuse of compare_ether_addr for sorting. Done via cocci script: $ cat compare_ether_addr.cocci @@ expression a,b; @@ - !compare_ether_addr(a, b) + ether_addr_equal(a, b) @@ expression a,b; @@ - compare_ether_addr(a, b) + !ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) == 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) != 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) == 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) != 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !!ether_addr_equal(a, b) + ether_addr_equal(a, b) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-09bluetooth: Convert compare_ether_addr to ether_addr_equalJoe Perches
Use the new bool function ether_addr_equal to add some clarity and reduce the likelihood for misuse of compare_ether_addr for sorting. Done via cocci script: $ cat compare_ether_addr.cocci @@ expression a,b; @@ - !compare_ether_addr(a, b) + ether_addr_equal(a, b) @@ expression a,b; @@ - compare_ether_addr(a, b) + !ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) == 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) != 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) == 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) != 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !!ether_addr_equal(a, b) + ether_addr_equal(a, b) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-09atm: Convert compare_ether_addr to ether_addr_equalJoe Perches
Use the new bool function ether_addr_equal to add some clarity and reduce the likelihood for misuse of compare_ether_addr for sorting. Done via cocci script: $ cat compare_ether_addr.cocci @@ expression a,b; @@ - !compare_ether_addr(a, b) + ether_addr_equal(a, b) @@ expression a,b; @@ - compare_ether_addr(a, b) + !ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) == 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) != 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) == 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) != 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !!ether_addr_equal(a, b) + ether_addr_equal(a, b) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-09bridge: Convert compare_ether_addr to ether_addr_equalJoe Perches
Use the new bool function ether_addr_equal to add some clarity and reduce the likelihood for misuse of compare_ether_addr for sorting. Done via cocci script: $ cat compare_ether_addr.cocci @@ expression a,b; @@ - !compare_ether_addr(a, b) + ether_addr_equal(a, b) @@ expression a,b; @@ - compare_ether_addr(a, b) + !ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) == 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) != 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) == 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) != 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !!ether_addr_equal(a, b) + ether_addr_equal(a, b) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-09bridge: netfilter: Convert compare_ether_addr to ether_addr_equalJoe Perches
Use the new bool function ether_addr_equal to add some clarity and reduce the likelihood for misuse of compare_ether_addr for sorting. Done via cocci script: $ cat compare_ether_addr.cocci @@ expression a,b; @@ - !compare_ether_addr(a, b) + ether_addr_equal(a, b) @@ expression a,b; @@ - compare_ether_addr(a, b) + !ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) == 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) != 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) == 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) != 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !!ether_addr_equal(a, b) + ether_addr_equal(a, b) Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-098021q: Convert compare_ether_addr to ether_addr_equalJoe Perches
Use the new bool function ether_addr_equal to add some clarity and reduce the likelihood for misuse of compare_ether_addr for sorting. Done via cocci script: $ cat compare_ether_addr.cocci @@ expression a,b; @@ - !compare_ether_addr(a, b) + ether_addr_equal(a, b) @@ expression a,b; @@ - compare_ether_addr(a, b) + !ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) == 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) != 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) == 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) != 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !!ether_addr_equal(a, b) + ether_addr_equal(a, b) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-09802: Convert compare_ether_addr to ether_addr_equalJoe Perches
Use the new bool function ether_addr_equal to add some clarity and reduce the likelihood for misuse of compare_ether_addr for sorting. Done via cocci script: $ cat compare_ether_addr.cocci @@ expression a,b; @@ - !compare_ether_addr(a, b) + ether_addr_equal(a, b) @@ expression a,b; @@ - compare_ether_addr(a, b) + !ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) == 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) != 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) == 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) != 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !!ether_addr_equal(a, b) + ether_addr_equal(a, b) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-09etherdevice.h: Add ether_addr_equalJoe Perches
Add a boolean function to check if 2 ethernet addresses are the same. This is to avoid any confusion about compare_ether_addr returning an unsigned, and not being able to use the compare_ether_addr function for sorting ala memcmp. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-09arm/dts: omap4-panda: Add LEDs supportBenoit Cousson
Add the debug LEDs nodes for an OMAP4 PandaBoard. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-09arm/dts: omap4-sdp: Add LEDs supportBenoit Cousson
Add the debug LEDs nodes for an OMAP4 SDP/Blaze. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-09arm/dts: twl4030: Add twl4030-gpio nodeBenoit Cousson
Add the twl-gpio node inside twl4030 definition. Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-10regulator: wm831x: Register all normal regulatorsMark Brown
Register all normal regulators rather than skipping unconfigured ones now that the core can handle regulators without init data. Skip the boost and isink regulators since they are normally controlled by other drivers. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-09printk - fix compilation for CONFIG_PRINTK=nKay Sievers
Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09usb-gadget: Initial merge of target module for UASP + BOTSebastian Andrzej Siewior
This fabric uses the target framework to provide a usb gadget device. This gadget supports the USB Attached SCSI Protocol (UASP) and Bulk Only Transfers (BOT or BBB). BOT is the primary interface, UAS is the alternative interface. It has been tested with dummy_hcd on HS and SS. On SS USB3 are supported. I also took my omap device and tried it there against WindowsXP. UAS implements basic command passing (i.e. read/write requests) and TASK MANAGEMENT functions are missing. I had to add a little of error recovery to BOT because Windows was issuing some strange commands and it does not complain after the gadget responded with CSW.status=1. (nab: Move to drivers/usb/gadget as per Sebastian to address legacy limitations for built-in gadget code) Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Felipe Balbi <balbi@ti.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Christoph Hellwig <hch@lst.de> Cc: Greg KH <gregkh@linuxfoundation.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-09sbp-target: Initial merge of firewire/ieee-1394 target mode supportChris Boot
The FireWire SBP-2 Target is a driver for using an IEEE-1394 connection as a SCSI transport. This module uses the SCSI Target framework to expose LUNs to other machines attached to a FireWire bus, in effect acting as a FireWire hard disk similar to FireWire Target Disk mode on many Apple computers. This commit contains the squashed pull from Chris Boot's SBP-2-Target: https://github.com/bootc/Linux-SBP-2-Target.git patch-v3 firewire-sbp-target: Add sbp_base.h header firewire-sbp-target: Add sbp_configfs.c firewire-sbp-target: Add sbp_fabric.{c,h} firewire-sbp-target: Add sbp_management_agent.{c,h} firewire-sbp-target: Add sbp_login.{c,h} firewire-sbp-target: Add sbp_target_agent.{c,h} firewire-sbp-target: Add sbp_scsi_cmnd.{c,h} firewire-sbp-target: Add to target Kconfig and Makefile Also add bootc's entry to the MAINTAINERS file. Great work Chris !! Signed-off-by: Chris Boot <bootc@bootc.net> Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Andy Grover <agrover@redhat.com> Cc: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-09firewire: Move fw_card kref functions into linux/firewire.hChris Boot
When writing a firewire driver that doesn't deal with struct fw_device objects (e.g. it only publishes FireWire units and doesn't subscribe to them), you likely need to keep referenced to struct fw_card objects so that you can send messages to other nodes. This patch moves fw_card_put(), fw_card_get() and fw_card_release() into the public include/linux/firewire.h header instead of drivers/firewire/core.h, and adds EXPORT_SYMBOL_GPL(fw_card_release). The firewire-sbp-target module requires these so it can keep a reference to the fw_card object in order that it can fetch ORBs to execute and read/write related data and status information. Signed-off-by: Chris Boot <bootc@bootc.net> Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-09firewire: Add function to get speed from opaque struct fw_requestChris Boot
Sometimes it's useful to know the FireWire speed of the request that has just come in to a fw_address_handler callback. As struct fw_request is opaque we can't peek inside to get the speed out of the struct fw_packet that's just inside. For example, the SBP-2 spec says: "The speed at which the block write request to the MANAGEMENT_AGENT register is received shall determine the speed used by the target for all subsequent requests to read the initiator’s configuration ROM, fetch ORB’s from initiator memory or store status at the initiator’s status_FIFO. Command block ORB’s separately specify the speed for requests addressed to the data buffer or page table." [ ANSI T10/1155D Revision 4 page 53/54 ] Signed-off-by: Chris Boot <bootc@bootc.net> Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-09usb:hsotg:samsung:cosmetic Move <linux/platform_data/s3c-hsotg.h> to proper ↵Lukasz Majewski
place This commit adds a cosmetic change to the s3c-hsotg UDC driver. It moves s3c-hsotg.h to other linux/ related inclusions. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09USB: ohci-at91: add a reset function to fix race conditionNicolas Ferre
A possible race condition appears because we are not initializing the ohci->regs before calling usb_hcd_request_irqs(). We move the call to ohci_init() in hcd->driver->reset() instead of hcd->driver->start() to fix this. This was experienced when we share the same IRQ line between OHCI and EHCI controllers. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Christian Eggers <christian.eggers@kathrein.de> Cc: stable <stable@vger.kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09USB: ohci-at91: use resource_size() for memory/io resource lengthNicolas Ferre
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09ARM: OMAP: USB: fix warning on EHCI PHY reset pathIgor Grinberg
When PHY reset pin is connected to a GPIO on external GPIO chip (e.g. I2C), we should not call the gpio_set_value() function, but gpio_set_value_cansleep(). Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Felipe Balbi <balbi@ti.com> Tested-by: Govindraj.R <govindraj.raja@ti.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09misc: MAX8997: Remove max8997-muic driverChanwoo Choi
This patch remove old max8997-muic drvier because of newly Extcon framework. Extcon framework manages the external connector, so add extcon-max8997 driver by using Extcon interface to support MUIC feature of Maxim 8997 PMIC instead of max8997-muic driver(drivers/misc/max8997-muic.c). Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09Extcon: add MAX8997 extcon driverChanwoo Choi
This patch add extcon-max8997 driver to support the muic feature of Maxim max8997 by using Extcon framework. The extcon-max8997 driver is implemented based on 'drivers/misc/ max8997-muic.c' and then use Extcon interface instead of callback function in struct max8997_muic_platform_data to notify cable state of notifee which want to know always newly cable state when external connector(e.g., USB, TA, JIG) is attached or detached. v1 - Use Extcon interface to notify cable state of notifee instead of callback function when external connector is attached or detached. - Bug fix of getting platform_data for irq_base value. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09serial8250-em: Add DT supportMagnus Damm
Update the 8250_em driver to support DT. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09serial8250-em: clk_get() IS_ERR() error handling fixMagnus Damm
Update the 8250_em driver to correctly handle the case where no clock is associated with the device. The return value of clk_get() needs to be checked with IS_ERR() to avoid NULL pointer referencing. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09target: Remove max_sectors device attribute for modern se_task less codeNicholas Bellinger
This patch removes the original usage of dev_attr->max_sectors in favor of dev_attr->hw_max_sectors that is now being enforced by target core from within transport_generic_cmd_sequencer() for SCF_SCSI_DATA_SG_IO_CDB ops. After the recent se_task removal patches from hch, this value for IBLOCK backends being set via configfs by userspace from an saved max_sectors value that is turning out to be problematic, so it makes sense to go ahead and remove this now legacy attribute all-together. This patch also continues to make se_dev_set_default_attribs() do (sectors / block_size) alignment for what actually get used by target_core_mod to be safe here, following the same alignment currently used by fabric_max_sectors. Reported-by: Andy Grover <agrover@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-09Merge git://1984.lsi.us.es/net-nextDavid S. Miller
2012-05-09target: lock => unlock typo in transport_lun_wait_for_tasksDan Carpenter
target_stop_cmd() returns with the lock held and IRQs disabled. The intent was to unlock here. This bug was originally added with: commit cf572a9627c9ae86082216de109780c1d2e2ee28 Author: Christoph Hellwig <hch@infradead.org> Date: Tue Apr 24 00:25:05 2012 -0400 target: move the state and execute lists to the command Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-09target: Enforce hw_max_sectors for SCF_SCSI_DATA_SG_IO_CDBNicholas Bellinger
Instead of depending upon a max_sectors value that may be set via configfs based upon original HW queue limitations, go ahead and convert to using the hw_max_sectors reported by the backend device in order to determine when to reject an I/O's who's sector count exceeds what is supported by the backend with a single se_cmd descriptor. It addresses a potential case where se_dev_attrib.max_sectors for IBLOCK backends has already been set via queue_max_sectors() to something small like max_sectors=32 (LVM, DRBD may do this), resulting typically sized SCF_SCSI_DATA_SG_IO_CDB to be incorrectly rejected with invalid_cdb_field in transport_generic_cmd_sequencer(). Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@purestorage.com> Cc: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-09usb: gadget: ci13xxx: convert to new styleAlexander Shishkin
Finally, convert to the new style framework, using udc_start/udc_stop methods. Since there is no need in the global _udc pointer, remove it. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09usb: gadget: ci13xxx: move endpoint (de-)initialization to probe/removeAlexander Shishkin
Currently, endpoints are initialized in gadget start/stop methods, however for the new style gadgets it is expected that bind() can be called before controller's start(), and we need endpoints already initialized at that point. So, move endpoint initialization to controller's probe before we switch to the "new style" gadget framework. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09usb: gadget: ci13xxx: replace home-brewed logging with dev_{err,warn,info}Alexander Shishkin
Logging output in the driver is mostly done using custom err/warn/info macros which rely on the existence of the global variable _udc, which is a global reference to the udc controller structure. This reference will have to go in order to allow us to have more than one chipidea udc in the system. Thus, replace custom macros with dev_{err,warn,info} using the platform device where possible. The trace() macro, which is a nop by default is left for tracing purposes. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09ASoC: cs42l52: Staticise non-exported symbolsMark Brown
Makes sparse happy and avoids polluting the global namespace. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Brian Austin <brian.austin@cirrus.com>
2012-05-09usb: gadget: ci13xxx: convert to platform deviceAlexander Shishkin
Let's break ci13xxx driver into a separate udc driver and platform drivers _pci and _msm, which will create a platform device for each pci (or msm) device found. The approach was introduced by Felipe in dwc3 driver and there seems to be no reason not to use it. msm related code is only compile-tested. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09usb: gadget: conversion of controllers choice to menuAlexander Shishkin
After the UDC class conversion, there is no reason to limit the kernel to have only one UDC controller in the system. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09usb: gadget: ci13xxx: redo register accessAlexander Shishkin
Use lookup table instead of conditional macrodefinitions of register addresses. With two different possible register layouts and different register offsets, it's easiest to build a table with register addresses at probe time, based on the information supplied from the platform and device capabilities. This way we get rid of branch-per-register-access. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09usb: gadget: ci13xxx: move global variables inside struct ci13xxxAlexander Shishkin
Make global variables that are specific for each UDC instance part of struct ci13xxx. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09usb: gadget: ci13xxx: drop needless parensAlexander Shishkin
Small and self-evident cleanup. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09usb-storage: unusual_devs entry for Yarvik PMP400 MP4 playerAlan Stern
This patch (as1553) adds an unusual_dev entrie for the Yarvik PMP400 MP4 music player. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Jesse Feddema <jdfeddema@gmail.com> Tested-by: Jesse Feddema <jdfeddema@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09serial_core: Update buffer overrun statistics.Corbin Atkinson
Currently, serial drivers don't report buffer overruns. When a buffer overrun occurs, tty_insert_flip_char returns 0, and no attempt is made to insert that same character again (i.e. it is lost). This patch reports buffer overruns via the buf_overrun field in the port's icount structure. Signed-off-by: Corbin Atkinson <corbin.atkinson@ni.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09tty: drop the pty lock during hangupAlan Cox
In theory we don't need it, in practice we are hitting some ill understood deadlock when we don't drop it. The old code dropped it here so we are not undoing anything problematic for pty. If pty could be unloaded it would be a problem but it can't. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09rcu: Make rcu_barrier() less disruptivePaul E. McKenney
The rcu_barrier() primitive interrupts each and every CPU, registering a callback on every CPU. Once all of these callbacks have been invoked, rcu_barrier() knows that every callback that was registered before the call to rcu_barrier() has also been invoked. However, there is no point in registering a callback on a CPU that currently has no callbacks, most especially if that CPU is in a deep idle state. This commit therefore makes rcu_barrier() avoid interrupting CPUs that have no callbacks. Doing this requires reworking the handling of orphaned callbacks, otherwise callbacks could slip through rcu_barrier()'s net by being orphaned from a CPU that rcu_barrier() had not yet interrupted to a CPU that rcu_barrier() had already interrupted. This reworking was needed anyway to take a first step towards weaning RCU from the CPU_DYING notifier's use of stop_cpu(). Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-05-09rcu: Explicitly initialize RCU_FAST_NO_HZ per-CPU variablesPaul E. McKenney
The current initialization of the RCU_FAST_NO_HZ per-CPU variables makes needless and fragile assumptions about the initial value of things like the jiffies counter. This commit therefore explicitly initializes all of them that are better started with a non-zero value. It also adds some comments describing the per-CPU state variables. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-05-09rcu: Make RCU_FAST_NO_HZ handle timer migrationPaul E. McKenney
The current RCU_FAST_NO_HZ assumes that timers do not migrate unless a CPU goes offline, in which case it assumes that the CPU will have to come out of dyntick-idle mode (cancelling the timer) in order to go offline. This is important because when RCU_FAST_NO_HZ permits a CPU to enter dyntick-idle mode despite having RCU callbacks pending, it posts a timer on that CPU to force a wakeup on that CPU. This wakeup ensures that the CPU will eventually handle the end of the grace period, including invoking its RCU callbacks. However, Pascal Chapperon's test setup shows that the timer handler rcu_idle_gp_timer_func() really does get invoked in some cases. This is problematic because this can cause the CPU that entered dyntick-idle mode despite still having RCU callbacks pending to remain in dyntick-idle mode indefinitely, which means that its RCU callbacks might never be invoked. This situation can result in grace-period delays or even system hangs, which matches Pascal's observations of slow boot-up and shutdown (https://lkml.org/lkml/2012/4/5/142). See also the bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=806548 This commit therefore causes the "should never be invoked" timer handler rcu_idle_gp_timer_func() to use smp_call_function_single() to wake up the CPU for which the timer was intended, allowing that CPU to invoke its RCU callbacks in a timely manner. Reported-by: Pascal Chapperon <pascal.chapperon@wanadoo.fr> Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
generated by cgit (git 2.34.1) at 2025-09-23 01:15:24 +0000