summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-05-09OMAP: omap4panda: Use common configuration for V1V8, V2V1 suppliesPeter Ujfalusi
These supplies going to be needed for the twl6040 driver. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-09OMAP: 4430SDP: Use common configuration for V1V8, V2V1 suppliesPeter Ujfalusi
These supplies going to be needed for the twl6040 driver. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-09OMAP4: twl-common: Add twl6030 V1V8, V2V1 SMPS common configurationPeter Ujfalusi
V1V8 supply from twl6030 commonly used as VIO for the machine. V2V1 is adviced to supply the twl6040, and also to feed the twl6030's VCXIO_IN, and VDAC_IN inputs. Create the common regulator configurations for these regulators: Make the V2V1 as supply_regulator for VCXIO, VDAC. Add twl6040 (1-004b) as consumer for V1V8, and V2V1. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> [tony@atomide.com: updated for the pm regulator changes] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-09ARM: OMAP: Mark Beagleboard-xM MMC bus as 4-bitRuss Dill
On Beagleboard-xM (all revisions) only MMC1_DAT0-MMC1_DAT3 are wired up. Tested on Beagleboard-xM Rev C1 and Beagleboard Rev B4. Signed-off-by: Russ Dill <Russ.Dill@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-09Add MSUB support for the LogicPD OMAP3530 DevKitsAshwin Bihari
Add support for the OMAP3 MUSB OTG controller to the LogicPD OMAP3530 SOM-LV[1] and Torpedo[2] DevKits [1] - www.logicpd.com/products/system-on-modules/omap35x-som-lv/ [2] - www.logicpd.com/products/system-on-modules/omap35x-torpedo-som/ Signed-off-by: Ashwin Bihari <ashwin.bihari@logicpd.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-09ARM: OMAP: rx51: Platform support for lis3lv02d accelerometerAmeya Palande
Platform support for lis3lv02d accelerometer Signed-off-by: Ameya Palande <ameya.palande@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-09ARM: OMAP2+: craneboard: register emac deviceMans Rullgard
This adds the required am35xx_emac_init() call to the craneboard init function. Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-09ARM: OMAP4: board-omap4panda: Register platform device for HDMI audio codecRicardo Neri
Add platform device registratation for HDMI audio codec. This is to be able to transmit audio through the HDMI output featured in Pandaboard and PandaboardES boards. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-09ARM: OMAP4: board-4430sdp: Register platform device for HDMI audio codecRicardo Neri
Add platform device registratation for HDMI audio codec. This is to be able to transmit audio through the HDMI output featured in SDP4430 and Blaze boards. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-09ARM: OMAP: devices: Register platform devices for HDMI audioRicardo Neri
Add platform registration for the devices HDMI audio support. The omap-hdmi-audio-dai platform device is to be used by the ASoC HDMI CPU DAI driver. The omap-hdmi-audio platform device is to be used by the ASoC HDMI machine driver that links together the ASOC CPU DAI, ASoC plaform and ASoC codec drivers. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-09ARM: OMAP3: igep0020: Add support for Micron NAND Flash storage memoryJavier Martinez Canillas
IGEP-based boards can have two different flash memories, a OneNAND or a NAND device. The boot configuration pins (sys_boot) are used to specify which memory is available. Also, this patch removes unnecesary code for registering the OneNAND. Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org> Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com> Tested-by: Enric Balletbo i Serra <eballetbo@gmail.com> [tony@atomide.com: fixed up a minor checkpatch warning] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-09ARM: OMAP2+: nand: Make board_onenand_init() visible to board codeJavier Martinez Canillas
board_onenand_init() and board_nand_init() initialization functions are used to initialize OneNAND and NAND memories respectively. But only board_nand_init() was visible to be used from board code. This patch makes possible to initialize a OneNAND flash memory within platform code. Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org> Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com> Tested-by: Enric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-09ARM: OMAP3: cm-t35: add support for power offIgor Grinberg
Enable the power off feature of the TPS65930 on-board PMIC. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-09ARM: OMAP: WiLink platform data for the PandaBoardMircea Gherzan
The "uim" deamon requires sysfs entries that are filled in using this platform data. Signed-off-by: Mircea Gherzan <mgherzan@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-09ARM: OMAP2PLUS: Enable HIGHMEMSantosh Shilimkar
HIGMEM support in kernel is quite mature now and we have boards like ZOOM, PANDA, SDP where 1 GB memories are installed. With HIGHMEM disabled not all of the 1GB of RAM (only ~700MB) can be accessed. Hence, enable HIGMEM to make use of the entire memory. On the boards which doesn't have more than 768 MB memory, all the memory is directly mapped in "lowmem" and highmem isn't exercised. Hence, there should be no impact by enabling HIGHMEM for boards that do not need it. Tested on OMAP4460 Panda-ES. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Jon Hunter <jon-hunter@ti.com> Tested-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-09ARM: OMAP: omap2plus_defconfig: Enable ehci-omap and sms95xx supportGovindraj.R
Boards like beagle and panda use ehci based smsc95xx lan chips one has to manually enable these supports to get nfs working on these boards. So keep these support enable by default. Signed-off-by: Govindraj.R <govindraj.raja@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-09Staging: ipack: add support for IP-OCTAL mezzanine boardSamuel Iglesias Gonsalvez
IP-OCTAL is a 8-channels serial port device. There are several models one per each standard: RS-232, RS-422, RS-485. This driver can manage all of them. Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09Staging: ipack: added support for the TEWS TPCI-200 carrier boardSamuel Iglesias Gonsalvez
Driver for the carrier board TEWS TPCI-200, a bridge between PCIe bus and IndustryPack bus. Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09Staging: IndustryPack bus for the Linux KernelSamuel Iglesias Gonsalvez
Add IndustryPack bus support for the Linux Kernel. This is a virtual bus that allows to perform all the operations between carrier and mezzanine boards. Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09mei: update MAINTAINERS fileTomas Winkler
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09mei: update Documentation/ioctl/ioctl-number.txtTomas Winkler
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09mei: move doc files Documentation/misc-devices/meiTomas Winkler
1. move mei.txt, TODO, and the example code under Documentation/misc-devices/mei 2. update the TODO file Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09mei: export mei.h for the user spaceTomas Winkler
The header exports API for application layer 1. move under include/linux and add to the export list 2. update include path n the sources 3. update TODO Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09uuid: add uuid.h to exported header listTomas Winkler
uuid is used in mei.h interface Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09mei: pci_probe/remove: use dev_err instead of printk(KERN_ERRTomas Winkler
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09mei: use pr_err instead of printk(KERN_ERRTomas Winkler
pr_ format is more compact and enable utilizing of pr_fmt macro Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09staging: Remove test of is_broadcast with is_multicastJoe Perches
A broadcast packet is a multicast packet, no need to test twice. Reorder one defective test in rtl_core of is_multi_ether_addr before is_broadcast_ether_addr as the is_multi returns true for broadcast frames. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09staging: line6/pcm.c: Removed trailing whitespaceJohannes Thumshirn
Removed a line of only whitespace Signed-off-by: Johannes Thumshirn <morbidrsa@googlemail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09staging: line6/midi.c: Added space between switch and open parenthesisJohannes Thumshirn
Added space between switch and open parenthesis to make checkpatch.pl happy Signed-off-by: Johannes Thumshirn <morbidrsa@googlemail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09staging: line6/midibuf.c changed printk(KERN_DEBUG, ... to pr_debug(Johannes Thumshirn
Changed printk(KERN_DEBUG, ...) call to pr_debug call in function void line6_midibuf_status(struct MidiBuffer *this) Signed-off-by: Johannes Thumshirn <morbidrsa@googlemail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09staging: wlags49_h2: Fix spelling Endianess to Endianness in wlags49_h2Masanari Iida
Correct spelling typo "Endianess" to "Endianness" in wlags49_h2. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09staging: rtl8712: Fix typos.Justin P. Mattock
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09staging: comedi: refactor sysfs files in comedi_fops.cH Hartley Sweeten
Refactor the sysfs attributes and functions to remove the need for the forward declarations and use the DEVICE_ATTR macro to define them. Instead of individually creating sysfs device attribute files, wrap them in an attribute_group and use the sysfs_create_group function to create them. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09staging: comedi: rtf520: las0, las1, and lcfg are void __iomem *H Hartley Sweeten
The las0, las1, and lcfg variables in struct rtdPrivate are all ioremap'ed pci resources and should be void __iomem * not void *. This quiets a lot of sparse warings for the writel and readl like: warning: incorrect type in argument 1 (different address spaces)    expected void const volatile [noderef] <asn:2>*addr    got void *<noident> warning: incorrect type in argument 2 (different address spaces)    expected void volatile [noderef] <asn:2>*addr    got void * Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09staging: comedi: mite: mite_io_addr and daq_io_addr are void __iomem *H Hartley Sweeten
The mite_io_addr and daq_io_addr variables in struct mite_struct are both ioremap'ed pci resources and should be void __iomem * not void *. This quiets a lot of sparse warings for the write[lwb],read[lwb] calls in the comedi mite drives like: warning: incorrect type in argument 1 (different address spaces) expected void const volatile [noderef] <asn:2>*addr got void *<noident> warning: incorrect type in argument 2 (different address spaces) expected void volatile [noderef] <asn:2>*addr got void * It also exposed some warnings in the mite ni_660x driver where the daq_io_address was getting cast as a void *const. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09staging: comedi: rename addi CamelCase function pointersH Hartley Sweeten
Rename the CamelCase variable names for the ADDI subdevice functions. This makes the code a bit cleaner and easier to follow. This will also help with converting the struct addi_board boardtypes array to C99 style initialization to help with maintaining the code. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09staging: comedi: refactor dt2814 driver and use module_comedi_driverH Hartley Sweeten
Move the struct comedi_driver to the end of the source and refactor the code to remove the forward declarations. Convert the driver to use the module_comedi_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09staging: comedi: refactor dt282x driver to remove forward declarationsH Hartley Sweeten
Move the struct comedi_driver and variables to the end of the source. This is more typical of how other drivers are written and removes the need for the forward declarations. Convert the driver to use the module_comedi_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09staging: comedi: refactor dt3000 driver to remove forward declarationsH Hartley Sweeten
Move the module_init/module_exit routines and the associated struct comedi_driver and other variables to the end of the source. This is more typical of how other drivers are written. Also, refactor a couple of the pci helper functions used during the attach. The removes the need for the forward declarations. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09staging: comedi: refactor dyna_pci10xx driver to remove forward declarationsH Hartley Sweeten
Move the struct comedi_driver and associated variables to the end of the source. This is more typical of how other drivers are written and removes the need for the forward declarations. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09staging: comedi: refactor the icp_multi driver to remove forward declarationsH Hartley Sweeten
Move the setup_channel_list function forward in the souce and the struct comedi_driver and associated variables to the end of the source. This is more typical of how other drivers are written and removes the need for the forward declarations. Remove the unnecessary comments for the attach/detach functions. Change the initialization of struct boardtype to c99 syntax and remove the comments. Convert the driver to use the module_comedi_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09staging: comedi: refactor jr3_pci driver to remove forward declarationsH Hartley Sweeten
Move the struct comedi_driver and associated variables to the end of the source. This is more typical of how other drivers are written and removes the need for the forward declarations. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09staging: comedi: refactor me4000 driver to remove forward declarationsH Hartley Sweeten
Move the struct comedi_driver, attach/detach functions, and associated variables to the end of the source. This is more typical of how other drivers are written and removes the need for most of the forward declarations. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09staging: comedi: refactor me_daq driver to remove forward declarationsH Hartley Sweeten
Move the module_init/module_exit routines and the associated struct comedi_driver and other variables to the end of the source. This is more typical of how other drivers are written and removes the need for the forward declarations. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09staging: comedi: refactor mpc624 driver and use module_comedi_driverH Hartley Sweeten
Move the struct comedi_driver and associated attach/detach routines to the end of the source. This is more typical of how other drivers are written and removes the need for the forward declarations. Convert the driver to use the module_comedi_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09staging: comedi: refactor mpc8260cpm driver and use module_comedi_driverH Hartley Sweeten
Move the module_init/module_exit routines and the associated struct comedi_driver and other variables to the end of the source. This is more typical of how other drivers are written and removes the need for the forward declarations. Convert the driver to use the module_comedi_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09staging: comedi: refactor multiq3 driver and use module_comedi_driverH Hartley Sweeten
Move the struct comedi_driver to the end of the source. Convert the driver to use the module_comedi_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09staging: comedi: partial refactor of s626 driver to remove forward declarationsH Hartley Sweeten
Move the module_init/module_exit routines and the associated struct comedi_driver and other variables to the end of the source. This is more typical of how other drivers are written and removes the need for the forward declarations. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09staging: comedi: refactor ssv_dnp driver and use module_comedi_driverH Hartley Sweeten
Move the module_init/module_exit routines and the associated struct comedi_driver and other variables to the end of the source. This is more typical of how other drivers are written and removes the need for the forward declarations. Convert the driver to use the module_comedi_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09staging: comedi: refactor unioxx5 driver and use module_comedi_driverH Hartley Sweeten
Move the module_init/module_exit routines and the associated struct comedi_drive to the end of the source. This is more typical of how other drivers are written and removes the need for the forward declarations. Convert the driver to use the module_comedi_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-23 12:14:12 +0000