summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-05-20[media] V4L2: Mark the DV Preset API as deprecatedHans Verkuil
The DV Preset API will be phased out in favor of the more flexible DV Timings API. Mark the preset API accordingly in the header and documentation. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] Feature removal: remove invalid DV presetsHans Verkuil
Formats V4L2_DV_1080I25, V4L2_DV_1080I30 and V4L2_DV_1080I29_97 do not exist, so these presets are bogus. Remove them in 3.6. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] tvp7002: add support for the new dv timings APIHans Verkuil
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] v4l2-dv-timings.h: definitions for CEA-861 and VESA DMT timingsHans Verkuil
This header contains the timings for the common CEA-861 and all VESA DMT formats for use with the V4L2 dv_timings API. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20m68k: add a defconfig for the M5475EVB ColdFire with MMU boardGreg Ungerer
Add a default configuration for the newly supported ColdFire CPUs running with MMU enabled. This is based on Freescales own M5475EVB demo board. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20m68knommu: unaligned.h fix for M68000 coreLuis Alves
This patch fixes unaligned memory access for the 68000 core based cpu's. Some time ago, my cpu (68000) was raising address/bus error's when mounting cifs shares (didn't bother to debug it at the time). After developing the MMC/SD card driver I was having the same issue when mounting the vfat fs. I've traced the issue down to the 'unaligned.h' file. (I guess nobody has ever used unaligned.h back in the 68328 'era'. Signed-off-by: Luis Alves <ljalvs@gmail.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20m68k: merge the MMU and non-MMU versions of the arch dma codeGreg Ungerer
The majority of the m68k architecture dma code is the same, so merge the current separated files dma_no.c and dma_mm.c back into a single dma.c The main alloc and free routines are a little different, so we keep a single #ifdef based on CONFIG_MMU for them. All the other support functions are now identical. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-05-20[media] v4l2 framework: add support for the new dv_timings ioctlsHans Verkuil
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20m68knommu: reorganize the no-MMU cache flushing to match m68kGreg Ungerer
Introduce cache_push() and cache_clear() functions for the non-MMU m68k devices. With these in place we can more easily merge some of the common m68k arch code. In particular by reorganizing the __flush_cache_all() code and separating the cache push and clear functions it becomes trivial to implement the new cache_push() and cache_clear() functions. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-05-20m68knommu: move the 54xx platform code into the common ColdFire code directoryGreg Ungerer
All these separate directories for each ColdFire CPU SoC varient seems like overkill. The majority of them only contain a single small config file. Move these into the common ColdFire code directory. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20m68knommu: move the 532x platform code into the common ColdFire code directoryGreg Ungerer
All these separate directories for each ColdFire CPU SoC varient seems like overkill. The majority of them only contain a single small config file. Move these into the common ColdFire code directory. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20m68knommu: move the 5407 platform code into the common ColdFire code directoryGreg Ungerer
All these separate directories for each ColdFire CPU SoC varient seems like overkill. The majority of them only contain a single small config file. Move these into the common ColdFire code directory. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20m68knommu: move the 5307 platform code into the common ColdFire code directoryGreg Ungerer
All these separate directories for each ColdFire CPU SoC varient seems like overkill. The majority of them only contain a single small config file. Move these into the common ColdFire code directory. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20m68knommu: move the 528x platform code into the common ColdFire code directoryGreg Ungerer
All these separate directories for each ColdFire CPU SoC varient seems like overkill. The majority of them only contain a single small config file. Move these into the common ColdFire code directory. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20m68knommu: move the 527x platform code into the common ColdFire code directoryGreg Ungerer
All these separate directories for each ColdFire CPU SoC varient seems like overkill. The majority of them only contain a single small config file. Move these into the common ColdFire code directory. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20m68knommu: move the 5272 platform code into the common ColdFire code directoryGreg Ungerer
All these separate directories for each ColdFire CPU SoC varient seems like overkill. The majority of them only contain a single small config file. Move these into the common ColdFire code directory. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20m68knommu: move the 5249 platform code into the common ColdFire code directoryGreg Ungerer
All these separate directories for each ColdFire CPU SoC varient seems like overkill. The majority of them only contain a single small config file. Move these into the common ColdFire code directory. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20m68knommu: move the 523x platform code into the common ColdFire code directoryGreg Ungerer
All these separate directories for each ColdFire CPU SoC varient seems like overkill. The majority of them only contain a single small config file. Move these into the common ColdFire code directory. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20m68knommu: move the 520x platform code into the common ColdFire code directoryGreg Ungerer
All these separate directories for each ColdFire CPU SoC varient seems like overkill. The majority of them only contain a single small config file. Move these into the common ColdFire code directory. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20m68knommu: move the 5206 platform code into the common ColdFire code directoryGreg Ungerer
All these separate directories for each ColdFire CPU SoC varient seems like overkill. The majority of them only contain a single small config file. Move these into the common ColdFire code directory. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20m68knommu: simplify the ColdFire 5407 GPIO struct setupGreg Ungerer
The GPIO data struct setup is now the only remaining code in the platform gpio.c file. So move it to the platform config.c code and remove the gpio.c file. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: simplify the ColdFire 532x GPIO struct setupGreg Ungerer
The GPIO data struct setup is now the only remaining code in the platform gpio.c file. So move it to the platform config.c code and remove the gpio.c file. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: simplify the ColdFire 5307 GPIO struct setupGreg Ungerer
The GPIO data struct setup is now the only remaining code in the platform gpio.c file. So move it to the platform config.c code and remove the gpio.c file. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: simplify the ColdFire 528x GPIO struct setupGreg Ungerer
The GPIO data struct setup is now the only remaining code in the platform gpio.c file. So move it to the platform config.c code and remove the gpio.c file. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: simplify the ColdFire 527x GPIO struct setupGreg Ungerer
The GPIO data struct setup is now the only remaining code in the platform gpio.c file. So move it to the platform config.c code and remove the gpio.c file. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: simplify the ColdFire 5272 GPIO struct setupGreg Ungerer
The GPIO data struct setup is now the only remaining code in the platform gpio.c file. So move it to the platform config.c code and remove the gpio.c file. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: simplify the ColdFire 5249 GPIO struct setupGreg Ungerer
The GPIO data struct setup is now the only remaining code in the platform gpio.c file. So move it to the platform config.c code and remove the gpio.c file. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: simplify the ColdFire 523x GPIO struct setupGreg Ungerer
The GPIO data struct setup is now the only remaining code in the platform gpio.c file. So move it to the platform config.c code and remove the gpio.c file. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: simplify the ColdFire 520x GPIO struct setupGreg Ungerer
The GPIO data struct setup is now the only remaining code in the platform gpio.c file. So move it to the platform config.c code and remove the gpio.c file. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: simplify the ColdFire 5206 GPIO struct setupGreg Ungerer
The GPIO data struct setup is now the only remaining code in the platform gpio.c file. So move it to the platform config.c code and remove the gpio.c file. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: make duplicated ColdFire GPIO init code common for allGreg Ungerer
The code that adds each ColdFire platforms GPIO signals is duplicated in each platforms specific code. Remove it from each platforms code and put a single version in the existing ColdFire gpio subsystem init code. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: switch to GPIO init macros in ColdFire 532x init codeGreg Ungerer
Modify the GPIO setup table to use the mcfgpio.h macros for table init. Simplifies code and reduces line count significantly. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: switch to GPIO init macros in ColdFire 5407 init codeGreg Ungerer
Modify the GPIO setup table to use the mcfgpio.h macros for table init. Simplifies code and reduces line count significantly. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: switch to GPIO init macros in ColdFire 5307 init codeGreg Ungerer
Modify the GPIO setup table to use the mcfgpio.h macros for table init. Simplifies code and reduces line count significantly. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: switch to GPIO init macros in ColdFire 528x init codeGreg Ungerer
Modify the GPIO setup table to use the mcfgpio.h macros for table init. Simplifies code and reduces line count significantly. We also need to rename some of the GPIO registers to be consistent with all other ColdFire parts (we can't use the new GPIO macros otherwise). Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: switch to GPIO init macros in ColdFire 527x init codeGreg Ungerer
Modify the GPIO setup table to use the mcfgpio.h macros for table init. Simplifies code and reduces line count significantly. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: switch to GPIO init macros in ColdFire 5272 init codeGreg Ungerer
Modify the GPIO setup table to use the mcfgpio.h macros for table init. Simplifies code and reduces line count significantly. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: switch to GPIO init macros in ColdFire 5249 init codeGreg Ungerer
Modify the GPIO setup table to use the mcfgpio.h macros for table init. Simplifies code and reduces line count significantly. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: switch to GPIO init macros in ColdFire 523x init codeGreg Ungerer
Modify the GPIO setup table to use the mcfgpio.h macros for table init. Simplifies code and reduces line count significantly. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: switch to GPIO init macros in ColdFire 520x init codeGreg Ungerer
Modify the GPIO setup table to use the mcfgpio.h macros for table init. Simplifies code and reduces line count significantly. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: switch to GPIO init macros in ColdFire 5206 init codeGreg Ungerer
Modify the GPIO setup table to use the mcfgpio.h macros for table init. Simplifies code and reduces line count significantly. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: introduce macros to simplify ColdFire GPIO table initializationGreg Ungerer
We have very large tables in the ColdFire CPU GPIO setup code that essentially boil down to 2 distinct types of GPIO pin initiaization. Using 2 macros we can reduce these large tables to at most a dozen lines of setup code, and in quite a few cases a single table entry. Introduce these 2 macros into the existing mcfgpio.h header. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68k: fix compiler warning by properly inlining flat_set_persistent()Ezequiel Garcia
This patch removes the following warning: fs/binfmt_flat.c:752: warning: unused variable 'persistent'. There is neither functionality change, nor extra code generated. Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20m68k: merge the MMU and non-MMU signal.c codeGreg Ungerer
The MMU (signal_mm.c) and non-MMU (signal_no.c) versions of the m68k architecture signal handling code are very similar. Most of their code is the same. Merge the two back into a single signal.c, and move some of the code around inside the file to minimize the number of #ifdefs required. Specificially we can group out the CONFIG_FPU and the CONFIG_MMU code. We end up needing a few other "#ifdef CONFIG_MMU" as well, but not too many. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-05-20[media] V4L2 spec: document the new V4L2 DV timings ioctlsHans Verkuil
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20net/ipv4: replace simple_strtoul with kstrtoulEldad Zack
Replace simple_strtoul with kstrtoul in three similar occurrences, all setup handlers: * route.c: set_rhash_entries * tcp.c: set_thash_entries * udp.c: set_uhash_entries Also check if the conversion failed. Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-20net/ipv4/ipconfig: neaten __setup placementEldad Zack
The __setup macro should follow the corresponding setup handler. Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19sparc32: drop unused inline functions in srmmu.cSam Ravnborg
When decelared inline the compiler does not warn about unused functions. But they are not used so drop them. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19sparc32: drop unused functions in pgtsrmmu.hSam Ravnborg
One function was only used by leon - move it to a leon specific file. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19sparc32,leon: move leon mmu functions to leon_mm.cSam Ravnborg
We already have a leaon specific file - so keep all the laon stuff in one place. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Konrad Eisele <konrad@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-13 21:28:18 +0000