| Age | Commit message (Collapse) | Author |
|---|
|
Move some userq fence handling code into amdgpu_userq_fence.c.
This matches the other code in that file.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Split out the queue map from the mqd create call and split
out the queue unmap from the mqd destroy call. This splits
the queue setup and teardown with the actual enablement
in the firmware.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Rename to map and umap to better align with what is happening
at the firmware level and remove the extra level of indirection
in the MES userq code.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This is unused so remove it.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Due to lack of a proper format specifier, %p4cc was being used instead
of %p4cl for the purpose of printing FourCCs. But the disadvange was
that they were being printed in a reverse order. %p4cl should correct
this issue.
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Link: https://lore.kernel.org/r/PN3PR01MB959783DC6377C4CAB203D7ADB8B52@PN3PR01MB9597.INDPRD01.PROD.OUTLOOK.COM
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
|
|
This patch adds support for kunit tests of generic 32-bit FourCCs added to
vsprintf.
Acked-by: Tamir Duberstein <tamird@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/PN3PR01MB95973AF4F6262B2D1996FB25B8B52@PN3PR01MB9597.INDPRD01.PROD.OUTLOOK.COM
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
|
|
%p4cc is designed for DRM/V4L2 FourCCs with their specific quirks, but
it's useful to be able to print generic 4-character codes formatted as
an integer. Extend it to add format specifiers for printing generic
32-bit FourCCs with various endian semantics:
%p4ch Host byte order
%p4cn Network byte order
%p4cl Little-endian
%p4cb Big-endian
The endianness determines how bytes are interpreted as a u32, and the
FourCC is then always printed MSByte-first (this is the opposite of
V4L/DRM FourCCs). This covers most practical cases, e.g. %p4cn would
allow printing LSByte-first FourCCs stored in host endian order
(other than the hex form being in character order, not the integer
value).
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/PN3PR01MB9597B01823415CB7FCD3BC27B8B52@PN3PR01MB9597.INDPRD01.PROD.OUTLOOK.COM
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
|
|
In preparation for moving the common bits of this driver, merge the
contents of mtk_hdmi_output_init in mtk_hdmi_register_audio_driver
function to aggregate all of the initial audio setup together in
the same function and to make it clear that all of the setup that
is performed in mtk_hdmi_output_init is specifically related only
to audio and not video.
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250415104321.51149-15-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Move the CEC device parsing logic to a new function called
mtk_hdmi_get_cec_dev(), and move the parsing action to the end
of mtk_hdmi_dt_parse_pdata(), allowing to remove gotos in this
function, reducing code size and improving readability.
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250415104321.51149-14-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Change error prints to use dev_err_probe() instead of dev_err()
where possible in function mtk_hdmi_dt_parse_pdata(), used only
during device probe.
While at it, also beautify some prints.
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250415104321.51149-13-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
In preparation for splitting common bits of this driver, moving
the hdmi_rec_n_table struct array, and the hdmi_recommended_n(),
hdmi_mode_clock_to_hz(), hdmi_expected_cts() functions, add one
function called mtk_hdmi_get_ncts() that sets both N and CTS in
a single call.
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250415104321.51149-12-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
In preparation for splitting common bits of this driver, move the
mutex-protected cable plugged callback and codec device setting
to a new function called mtk_hdmi_audio_set_plugged_cb().
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250415104321.51149-11-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
In preparation for splitting common bits of this driver, move the
audio params (codec, sample rate/size, input type, i2s format, etc)
selection to a new function called mtk_hdmi_audio_params().
While at it, also rename "hdmi_params" to "aud_params" both to match
the mtk_hdmi struct member name and to clarify that those parameters
are for HDMI Audio and not for HDMI Video configuration.
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250415104321.51149-10-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
As a cleanup, and in preparation for splitting common bits of this
driver, disgregate the code in function mtk_hdmi_audio_set_param()
to the beginning and end of function mtk_hdmi_audio_hw_params().
In a later commit, the hw_params callback function will also be
disgregated so that the code will get two functions: one that
performs the generic hdmi_audio_param copy, and one that performs
IP specific setup, both of which will be called in the callback,
allowing all of the non IP version specific code to get moved in
a common file.
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250415104321.51149-9-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
In preparation for the addition of a new version of the HDMI IP
which will need to share its iospace between multiple subdrivers,
and in preparation for moving out the common bits between the two,
migrate this driver to fully use regmap.
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250415104321.51149-8-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Now that all of the mtk_hdmi subdrivers are a platform driver on
their own it is possible to remove the custom init/exit functions
in this driver and just use the module_platform_driver() macro.
While at it, also compress struct of_device_id entries and remove
stray commas in mtk_hdmi_driver assignments.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250415104321.51149-7-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
In preparation for adding a driver for the new HDMIv2 IP, and
before splitting out the common bits from the HDMI driver,
change the mtk_hdmi_ddc driver from being registered from the
HDMI driver itself to be a module_platform_driver of its own.
With this change, there are no more users of the mtk_hdmi.h header
so, while at it, also remove it.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250415104321.51149-6-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
found with the new enumerated_ref code
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We've got some reports of this happening in the wild, and need a bit
more info to debug it:
https://github.com/koverstreet/bcachefs/issues/854
https://www.reddit.com/r/bcachefs/comments/1k28kjm/surprise_soft_lockup/
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We don't require that bucket size is block size aligned (although it
should be!) - so we need to handle this in the journal code.
This fixes an assertion pop in jorunal_entry_close(), where the journal
entry overruns available space - after rounding it up to block size.
Fixes: https://github.com/koverstreet/bcachefs/issues/854
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Syzbot managed to come up with a filesystem where check/repair got
rather confused at finding a reflink pointer in the inodes btree.
Currently, the "key allowed in this btree" checks only apply at commit
time, not read time - for forwards compatibility. It seems this is too
loose.
Now, strict key type allowed checks apply:
- at commit time (no forward compatibility issues)
- for btree node pointers
- if it's a known btree, known key type, and the key type has the
"BKEY_TYPE_strict_btree_checks" flag.
This means we still have the option of using generic key types - e.g.
KEY_TYPE_error, KEY_TYPE_set - on more existing btrees in the future,
while most key types that are intended for only a specific btree get
stricter checks.
Reported-by: syzbot+baee8591f336cab0958b@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We now more often do repair automatically, without the user invoking
fsck - and sometimes that can involve fixing lots of errors, so let's
avoid flooding the dmesg log.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Reported-by: syzbot+baee8591f336cab0958b@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Don't set JOURNAL_running until we're also calling
journal_space_available() for the first time.
If JOURNAL_running is set, shutdown will write an empty journal entry -
but this will hit an assert in journal_entry_open() if we've never
called journal_space_available().
Reported-by: syzbot+53bb24d476ef8368a7f0@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
I had left the warning around but as a non-fatal error to get my gcc-15
builds going, but fixed up some of the most annoying warning cases so
that it wouldn't be *too* verbose.
Because I like the _concept_ of the warning, even if I detested the
implementation to shut it up.
It turns out the implementation to shut it up is even more broken than I
thought, and my "shut up most of the warnings" patch just caused fatal
errors on gcc-14 instead.
I had tested with clang, but when I upgrade my development environment,
I try to do it on all machines because I hate having different systems
to maintain, and hadn't realized that gcc-14 now had issues.
The ACPI case is literally why I wanted to have a *type* that doesn't
trigger the warning (see commit d5d45a7f2619: "gcc-15: make
'unterminated string initialization' just a warning"), instead of
marking individual places as "__nonstring".
But gcc-14 doesn't like that __nonstring location that shut gcc-15 up,
because it's on an array of char arrays, not on one single array:
drivers/acpi/tables.c:399:1: error: 'nonstring' attribute ignored on objects of type 'const char[][4]' [-Werror=attributes]
399 | static const char table_sigs[][ACPI_NAMESEG_SIZE] __initconst __nonstring = {
| ^~~~~~
and my attempts to nest it properly with a type had failed, because of
how gcc doesn't like marking the types as having attributes, only
symbols.
There may be some trick to it, but I was already annoyed by the bad
attribute design, now I'm just entirely fed up with it.
I wish gcc had a proper way to say "this type is a *byte* array, not a
string".
The obvious thing would be to distinguish between "char []" and an
explicitly signed "unsigned char []" (as opposed to an implicitly
unsigned char, which is typically an architecture-specific default, but
for the kernel is universal thanks to '-funsigned-char').
But any "we can typedef a 8-bit type to not become a string just because
it's an array" model would be fine.
But "__attribute__((nonstring))" is sadly not that sane model.
Reported-by: Chris Clayton <chris2553@googlemail.com>
Fixes: 4b4bd8c50f48 ("gcc-15: acpi: sprinkle random '__nonstring' crumbles around")
Fixes: d5d45a7f2619 ("gcc-15: make 'unterminated string initialization' just a warning")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
RK3588 integrates the Analogix eDP 1.3 TX controller IP and the HDMI/eDP
TX Combo PHY based on a Samsung IP block. There are also two independent
eDP display interface with different address on RK3588 Soc.
The patch currently adds only the basic support, specifically RGB output
up to 4K@60Hz, without the tests for audio, PSR and other eDP 1.3 specific
features.
In additon, the above Analogix IP has always been utilized as eDP on
Rockchip platform, despite its capability to also support the DP v1.2.
Therefore, the newly added logs will contain the term 'edp' rather than
'dp'. And the newly added 'apb' reset control is to ensure the APB bus
of eDP controller works well on the RK3588 SoC.
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Link: https://lore.kernel.org/r/20250310104114.2608063-12-damon.ding@rock-chips.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Expand enum analogix_dp_devtype with RK3588_EDP, and add max_link_rate
and max_lane_count configs for it.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Link: https://lore.kernel.org/r/20250310104114.2608063-11-damon.ding@rock-chips.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Compared with RK3288/RK3399, the HBR2 link rate support is the main
improvement of RK3588 eDP TX controller, and there are also two
independent eDP display interfaces on RK3588 Soc.
The newly added 'apb' reset is to ensure the APB bus of eDP controller
works well on the RK3588 SoC.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Link: https://lore.kernel.org/r/20250310104114.2608063-10-damon.ding@rock-chips.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Move drm_of_find_panel_or_bridge() a little later and combine it with
component_add() into a new function rockchip_dp_link_panel(). The function
will serve as done_probing() callback of devm_of_dp_aux_populate_bus(),
aiding to support for obtaining the eDP panel via the DP AUX bus.
If failed to get the panel from the DP AUX bus, it will then try the other
way to get panel information through the platform bus.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250310104114.2608063-9-damon.ding@rock-chips.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Add analogix_dpaux_wait_hpd_asserted() to help confirm the HPD state
before doing AUX transfers.
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250310104114.2608063-8-damon.ding@rock-chips.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
The main modification is moving the DP AUX initialization from function
analogix_dp_bind() to analogix_dp_probe(). In order to get the EDID of
eDP panel during probing, it is also needed to advance PM operations to
ensure that eDP controller and phy are prepared for AUX transmission.
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250310104114.2608063-7-damon.ding@rock-chips.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
&analogix_dp_device.aux
Add two new functions: one to find &analogix_dp_device.plat_data via
&drm_dp_aux, and the other to get &analogix_dp_device.aux. Both of them
serve for the function of getting panel from DP AUX bus, which is why
they are included in a single commit.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Link: https://lore.kernel.org/r/20250310104114.2608063-6-damon.ding@rock-chips.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
the DP AUX bus
According to Documentation/devicetree/bindings/display/dp-aux-bus.yaml,
it is a good way to get panel through the DP AUX bus.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Link: https://lore.kernel.org/r/20250310104114.2608063-5-damon.ding@rock-chips.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Add support to configurate link rate, lane count, voltage swing and
pre-emphasis with phy_configure(). It is helpful in application scenarios
where analogix controller is mixed with the phy of other vendors.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Link: https://lore.kernel.org/r/20250310104114.2608063-4-damon.ding@rock-chips.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
analogix_dp_bind()/analogix_dp_unbind()
Remove the check related to CONFIG_PM in order to make the code more
concise, as the CONFIG_PM should be a required option for many drivers.
In addition, it is preferable to use devm_pm_runtime_enable() instead of
manually invoking pm_runtime_enable() followed by pm_runtime_disable().
Suggested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Link: https://lore.kernel.org/r/20250310104114.2608063-3-damon.ding@rock-chips.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
disable_irq()
The IRQF_NO_AUTOEN can be used for the drivers that don't want
interrupts to be enabled automatically via devm_request_threaded_irq().
Using this flag can provide be more robust compared to the way of
calling disable_irq() after devm_request_threaded_irq() without the
IRQF_NO_AUTOEN flag.
Suggested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Link: https://lore.kernel.org/r/20250310104114.2608063-2-damon.ding@rock-chips.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
|
|
The C sequence points are complicated things, and gcc-15 has apparently
added a warning for the case where an object is both used and modified
multiple times within the same sequence point.
That's a great warning.
Or rather, it would be a great warning, except gcc-15 seems to not
really be very exact about it, and doesn't notice that the modification
are to two entirely different members of the same object: the array
counter and the array entries.
So that seems kind of silly.
That said, the code that gcc complains about is unnecessarily
complicated, so moving the array counter update into a separate
statement seems like the most straightforward fix for these warnings:
drivers/net/wireless/intel/iwlwifi/mld/d3.c: In function ‘iwl_mld_set_netdetect_info’:
drivers/net/wireless/intel/iwlwifi/mld/d3.c:1102:66: error: operation on ‘netdetect_info->n_matches’ may be undefined [-Werror=sequence-point]
1102 | netdetect_info->matches[netdetect_info->n_matches++] = match;
| ~~~~~~~~~~~~~~~~~~~~~~~~~^~
drivers/net/wireless/intel/iwlwifi/mld/d3.c:1120:58: error: operation on ‘match->n_channels’ may be undefined [-Werror=sequence-point]
1120 | match->channels[match->n_channels++] =
| ~~~~~~~~~~~~~~~~~^~
side note: the code at that second warning is actively buggy, and only
works on little-endian machines that don't do strict alignment checks.
The code casts an array of integers into an array of unsigned long in
order to use our bitmap iterators. That happens to work fine on any
sane architecture, but it's still wrong.
This does *not* fix that more serious problem. This only splits the two
assignments into two statements and fixes the compiler warning. I need
to get rid of the new warnings in order to be able to actually do any
build testing.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
All of these cases are perfectly valid and good traditional C, but hit
by the "you're not NUL-terminating your byte array" warning.
And none of the cases want any terminating NUL character.
Mark them __nonstring to shut up gcc-15 (and in the case of the ak8974
magnetometer driver, I just removed the explicit array size and let gcc
expand the 3-byte and 6-byte arrays by one extra byte, because it was
the simpler change).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This removes two cases of explicit NUL padding that now causes warnings
because of '-Wunterminated-string-initialization' being part of -Wextra
in gcc-15.
Gcc is being silly in this case when it says that it truncates a NUL
terminator, because in these cases there were _multiple_ NUL characters.
But we can get rid of the warning by just simplifying the two
initializers that trigger the warning for me, so this does exactly that.
I'm not sure why the power supply code did that odd
.attr_name = #_name "\0",
pattern: it was introduced in commit 2cabeaf15129 ("power: supply: core:
Cleanup power supply sysfs attribute list"), but that 'attr_name[]'
field is an explicitly sized character array in a statically initialized
variable, and a string initializer always has a terminating NUL _and_
statically initialized character arrays are zero-padded anyway, so it
really seems to be rather extraneous belt-and-suspenders.
The zero_uuid[16] initialization in drivers/md/bcache/super.c makes
perfect sense, but it isn't necessary for the same reasons, and not
worth the new gcc warning noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is not great: I'd much rather introduce a typedef that is a "ACPI
name byte buffer", and use that to mark these special 4-byte ACPI names
that do not use NUL termination.
But as noted in the previous commit ("gcc-15: make 'unterminated string
initialization' just a warning") gcc doesn't actually seem to support
that notion, so instead you have to just mark every single array
declaration individually.
So this is not pretty, but this gets rid of the bulk of the annoying
warnings during an allmodconfig build for me.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
gcc-15 enabling -Wunterminated-string-initialization in -Wextra by
default was done with the best intentions, but the warning is still
quite broken.
What annoys me about the warning is that this is a very traditional AND
CORRECT way to initialize fixed byte arrays in C:
unsigned char hex[16] = "0123456789abcdef";
and we use this all over the kernel. And the warning is fine, but gcc
developers apparently never made a reasonable way to disable it. As is
(sadly) tradition with these things.
Yes, there's "__attribute__((nonstring))", and we have a macro to make
that absolutely disgusting syntax more palatable (ie the kernel syntax
for that monstrosity is just "__nonstring").
But that attribute is misdesigned. What you'd typically want to do is
tell the compiler that you are using a type that isn't a string but a
byte array, but that doesn't work at all:
warning: ‘nonstring’ attribute does not apply to types [-Wattributes]
and because of this fundamental mis-design, you then have to mark each
instance of that pattern.
This is particularly noticeable in our ACPI code, because ACPI has this
notion of a 4-byte "type name" that gets used all over, and is exactly
this kind of byte array.
This is a sad oversight, because the warning is useful, but really would
be so much better if gcc had also given a sane way to indicate that we
really just want a byte array type at a type level, not the broken "each
and every array definition" level.
So now instead of creating a nice "ACPI name" type using something like
typedef char acpi_name_t[4] __nonstring;
we have to do things like
char name[ACPI_NAMESEG_SIZE] __nonstring;
in every place that uses this concept and then happens to have the
typical initializers.
This is annoying me mainly because I think the warning _is_ a good
warning, which is why I'm not just turning it off in disgust. But it is
hampered by this bad implementation detail.
[ And obviously I'm doing this now because system upgrades for me are
something that happen in the middle of the release cycle: don't do it
before or during travel, or just before or during the busy merge
window period. ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
During initialisation of Focusrite USB audio interfaces, -EPROTO is
sometimes returned from usb_set_interface(), which sometimes prevents
the device from working: subsequent usb_set_interface() and
uac_clock_source_is_valid() calls fail.
This patch adds up to 5 retries in endpoint_set_interface(), with a
delay starting at 5ms and doubling each time. 5 retries was chosen to
allow for longer than expected waits for the interface to start
responding correctly; in testing, a single 5ms delay was sufficient to
fix the issue.
Closes: https://github.com/geoffreybennett/fcp-support/issues/2
Cc: stable@vger.kernel.org
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://patch.msgid.link/Z//7s9dKsmVxHzY2@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The speaker doesn't mute when plugged headphone.
This platform support 4ch speakers.
The speaker pin 0x14 wasn't fill verb table.
After assigned model ALC245_FIXUP_HP_SPECTRE_X360_EU0XXX.
The speaker can mute when headphone was plugged.
Fixes: aa8e3ef4fe53 ("ALSA: hda/realtek: Add quirks for various HP ENVY models")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/eb4c14a4d85740069c909e756bbacb0e@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The old development toolchain binaries were hosted in the or1k-gcc
development github repo release page. However, now that we have all
code upstream I cut releases from stable upstream tarballs. It does not
make sense to tag the or1k-gcc github repo releases for these stable
releases.
Update the toolchain binaries URL to point to where they are now hosted
on the or1k-toolchain-build github release page.
Signed-off-by: Stafford Horne <shorne@gmail.com>
|
|
The librecores.org mailing list was replaced with vger.kernel.org last
year after the old mail server went offline. Update the docs to reflect
the new list.
Signed-off-by: Stafford Horne <shorne@gmail.com>
|
|
Add cacheinfo support for OpenRISC.
Currently, a few CPU cache attributes pertaining to OpenRISC processors
are exposed along with other unrelated CPU attributes in the procfs file
system (/proc/cpuinfo). However, a few cache attributes remain unexposed.
Provide a mechanism that the generic cacheinfo infrastructure can employ
to expose these attributes via the sysfs file system. These attributes
can then be exposed in /sys/devices/system/cpu/cpuX/cache/indexN. Move
the implementation to pull cache attributes from the processor's
registers from arch/openrisc/kernel/setup.c with a few modifications.
This implementation is based on similar work done for MIPS and LoongArch.
Link: https://raw.githubusercontent.com/openrisc/doc/master/openrisc-arch-1.4-rev0.pdf
Signed-off-by: Sahil Siddiq <sahilcdq0@gmail.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>
|
|
According to the OpenRISC architecture manual, the dcache and icache may
not be present. When these caches are present, the invalidate and flush
registers may be absent. The current implementation does not perform
checks to verify their presence before utilizing cache registers, or
invalidating and flushing cache blocks.
Introduce new functions to detect the presence of cache components and
related special-purpose registers.
There are a few places where a range of addresses have to be flushed or
invalidated and the implementation is duplicated. Introduce new utility
functions and macros that generalize this implementation and reduce
duplication.
Signed-off-by: Sahil Siddiq <sahilcdq0@gmail.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>
|
|
The "cpuinfo_or1k" structure currently has identical data members for
different cache components.
Remove these fields out of struct cpuinfo_or1k and into its own struct.
This reduces duplication while keeping cpuinfo_or1k extensible so more
cache descriptors can be added in the future.
Also add a new field "sets" to the new structure.
Signed-off-by: Sahil Siddiq <sahilcdq0@gmail.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>
|
