| Age | Commit message (Collapse) | Author |
|---|
|
When AC adapter is unplugged or plugged in EC wakes from HW sleep but
APU doesn't enter back into HW sleep.
The reason this happens is that, when the APU exits HW sleep, the power
rails controlled by the EC will power up the TCON. The TCON has a GPIO
that will be toggled at this time. The GPIO is not marked as a wakeup
source, but the GPIO controller still has an unserviced interrupt.
Unserviced interrupts will block entering HW sleep again. Clearing the
GPIO doesn't help as the TCON continues to assert it until it's been
initialized by i2c-hid.
Fixing this would require TCON F/W changes and it's already broken in
the wild on production hardware.
To avoid triggering this issue add a quirk to avoid letting EC wake
up system at all. The power button still works properly on this system.
Reported-by: Antheas Kapenekakis <lkml@antheas.dev>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3929
Link: https://github.com/bazzite-org/patchwork/commit/95b93b2852718ee1e808c72e6b1836da4a95fc63
Co-developed-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20250401133858.1892077-1-superm1@kernel.org
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Passing a non-literal format string to dev_set_name causes a warning:
drivers/infiniband/core/ucaps.c:173:33: error: format string is not a string literal (potentially insecure) [-Werror,-Wformat-security]
173 | ret = dev_set_name(&ucap->dev, ucap_names[type]);
| ^~~~~~~~~~~~~~~~
drivers/infiniband/core/ucaps.c:173:33: note: treat the string as an argument to avoid this
173 | ret = dev_set_name(&ucap->dev, ucap_names[type]);
| ^
| "%s",
Turn the name into the %s argument as suggested by gcc.
Fixes: 61e51682816d ("RDMA/uverbs: Introduce UCAP (User CAPabilities) API")
Link: https://patch.msgid.link/r/20250314155721.264083-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The cited commit in Fixes tag introduced a bug which can cause hang
of completion queue processing because of notification queue budget
goes to zero.
Found while doing nfs over rdma mount and umount.
Below message is noticed because of the existing bug.
kernel: cm_destroy_id_wait_timeout: cm_id=00000000ff6c6cc6 timed out. state 11 -> 0, refcnt=1
Fix to handle this issue -
Driver will not change nq->budget upon create and destroy of cq and srq
rdma resources.
Fixes: cb97b377a135 ("RDMA/bnxt_re: Refurbish CQ to NQ hash calculation")
Link: https://patch.msgid.link/r/20250324040935.90182-1-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Commit a7e23ec17feec ("ACPI: button: Install notifier for system
events as well") modified the ACPI button behavior to send
`ACPI_BUTTON_NOTIFY_WAKE` events.
This caused a regression on Dell Optiplex 3040 sending `KEY_POWER`
randomly at runtime.
Adjust logic so that the `ACPI_BUTTON_NOTIFY_WAKE` event will never
send `KEY_POWER`.
Fixes: a7e23ec17feec ("ACPI: button: Install notifier for system events as well")
Reported-by: Ian Laurie <nixuser@mail.com>
Closes: https://lore.kernel.org/linux-acpi/CAJZ5v0hbA6bqxHupTh4NZR-GVSb9M5RL7JSb2yQgvYYJg+z2aQ@mail.gmail.com/T/#md8071e480212201f23e4929607386750d3b6bc13
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2357044
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Ian Laurie <nixuser@mail.com>
Link: https://patch.msgid.link/20250404145034.2608574-1-superm1@kernel.org
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Syzbot reported an issue in hfs subsystem:
BUG: KASAN: slab-out-of-bounds in memcpy_from_page include/linux/highmem.h:423 [inline]
BUG: KASAN: slab-out-of-bounds in hfs_bnode_read fs/hfs/bnode.c:35 [inline]
BUG: KASAN: slab-out-of-bounds in hfs_bnode_read_key+0x314/0x450 fs/hfs/bnode.c:70
Write of size 94 at addr ffff8880123cd100 by task syz-executor237/5102
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:377 [inline]
print_report+0x169/0x550 mm/kasan/report.c:488
kasan_report+0x143/0x180 mm/kasan/report.c:601
kasan_check_range+0x282/0x290 mm/kasan/generic.c:189
__asan_memcpy+0x40/0x70 mm/kasan/shadow.c:106
memcpy_from_page include/linux/highmem.h:423 [inline]
hfs_bnode_read fs/hfs/bnode.c:35 [inline]
hfs_bnode_read_key+0x314/0x450 fs/hfs/bnode.c:70
hfs_brec_insert+0x7f3/0xbd0 fs/hfs/brec.c:159
hfs_cat_create+0x41d/0xa50 fs/hfs/catalog.c:118
hfs_mkdir+0x6c/0xe0 fs/hfs/dir.c:232
vfs_mkdir+0x2f9/0x4f0 fs/namei.c:4257
do_mkdirat+0x264/0x3a0 fs/namei.c:4280
__do_sys_mkdir fs/namei.c:4300 [inline]
__se_sys_mkdir fs/namei.c:4298 [inline]
__x64_sys_mkdir+0x6c/0x80 fs/namei.c:4298
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fbdd6057a99
Add a check for key length in hfs_bnode_read_key to prevent
out-of-bounds memory access. If the key length is invalid, the
key buffer is cleared, improving stability and reliability.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+5f3a973ed3dfb85a6683@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=5f3a973ed3dfb85a6683
Cc: stable@vger.kernel.org
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Link: https://lore.kernel.org/20241019191303.24048-1-kovalev@altlinux.org
Reviewed-by: Cengiz Can <cengiz.can@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
e820__register_nosave_regions()
While debugging kexec/hibernation hangs and crashes, it turned out that
the current implementation of e820__register_nosave_regions() suffers from
multiple serious issues:
- The end of last region is tracked by PFN, causing it to find holes
that aren't there if two consecutive subpage regions are present
- The nosave PFN ranges derived from holes are rounded out (instead of
rounded in) which makes it inconsistent with how explicitly reserved
regions are handled
Fix this by:
- Treating reserved regions as if they were holes, to ensure consistent
handling (rounding out nosave PFN ranges is more correct as the
kernel does not use partial pages)
- Tracking the end of the last RAM region by address instead of pages
to detect holes more precisely
These bugs appear to have been introduced about ~18 years ago with the very
first version of e820_mark_nosave_regions(), and its flawed assumptions were
carried forward uninterrupted through various waves of rewrites and renames.
[ mingo: Added Git archeology details, for kicks and giggles. ]
Fixes: e8eff5ac294e ("[PATCH] Make swsusp avoid memory holes and reserved memory regions on x86_64")
Reported-by: Roberto Ricci <io@r-ricci.it>
Tested-by: Roberto Ricci <io@r-ricci.it>
Signed-off-by: Myrrh Periwinkle <myrrhperiwinkle@qtmlabs.xyz>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Len Brown <len.brown@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250406-fix-e820-nosave-v3-1-f3787bc1ee1d@qtmlabs.xyz
Closes: https://lore.kernel.org/all/Z4WFjBVHpndct7br@desktop0a/
|
|
The function get_vm_area() is not defined for non-MMU builds and causes a
build error if it is used. Hide the map_pages() function around a:
#ifdef CONFIG_MMU
to keep it from being compiled when CONFIG_MMU is not set.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250407120111.2ccc9319@gandalf.local.home
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/all/4f8ece8b-8862-4f7c-8ede-febd28f8a9fe@roeck-us.net/
Fixes: 394f3f02de531 ("tracing: Use vmap_page_range() to map memmap ring buffer")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Because the clocks were just enabled, bail out to the proper target if
there are problems with the regulator.
Fixes: fae80a99dc03 ("mmc: renesas_sdhi: Add support for RZ/G3E SoC")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250330221732.56072-2-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The driver started using the regulator subsystem and fails to build without
a dependeny on CONFIG_REGULATOR:
ERROR: modpost: "rdev_get_drvdata" [drivers/mmc/host/renesas_sdhi_core.ko] undefined!
ERROR: modpost: "devm_regulator_register" [drivers/mmc/host/renesas_sdhi_core.ko] undefined!
The 'select RESET_CONTROLLER' needs to either go away or get changed to a dependency
in order to avoid Kconfig dependency loops here. It also turns out the the superh
version needs neither RESET_CONTROLLER nor REGULATOR, and this works because
CONFIG_OF is not set there.
Change both to a 'depends on', but add '|| !OF' for the superh case.
Fixes: fae80a99dc03 ("mmc: renesas_sdhi: Add support for RZ/G3E SoC")
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250329164145.3194284-1-arnd@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
After moving tmio_mmc_host_probe down, error handling has to be
adjusted.
Fixes: 74f45de394d9 ("mmc: renesas_sdhi: register irqs before registering controller")
Reviewed-by: Ihar Salauyou <salauyou.ihar@gmail.com>
Signed-off-by: Ruslan Piasetskyi <ruslan.piasetskyi@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250326220638.460083-1-ruslan.piasetskyi@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Xen disables ACPI for PV guests in DomU, which causes acpi_mps_check() to
return 1 when CONFIG_X86_MPPARSE is not set. As a result, the local APIC is
disabled and the guest is later limited to a single vCPU, despite being
configured with more.
This regression was introduced in version 6.9 in commit 7c0edad3643f
("x86/cpu/topology: Rework possible CPU management"), which added an
early check that limits CPUs to 1 if apic_is_disabled.
Update the acpi_mps_check() logic to return 0 early when running as a Xen
PV guest in DomU, preventing APIC from being disabled in this specific case
and restoring correct multi-vCPU behaviour.
Fixes: 7c0edad3643f ("x86/cpu/topology: Rework possible CPU management")
Signed-off-by: Petr Vaněk <arkamar@atlas.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250407132445.6732-2-arkamar@atlas.cz
|
|
As I am leaving AMD and will no longer be maintaining
these platform drivers, so removing myself from maintainership.
Signed-off-by: Mubin Sayyed <mubin.sayyed@amd.com>
Acked-by: Damien Le Moal <dlemoal@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20250403060836.2602361-1-mubin.sayyed@amd.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
The recently introduced msi_parent_ops::chip_flags sets irq_eoi()/irq_ack()
conditionally, but MIP driver has not been updated. Populate chip_flags
with EOI | ACK flags.
Fixes: 32c6c054661a ("irqchip: Add Broadcom BCM2712 MSI-X interrupt controller")
Signed-off-by: Stanimir Varbanov <svarbanov@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250407125918.3021454-1-svarbanov@suse.de
|
|
Scanning for namespaces can take some time, so if the target is
reconfigured while the scan is running we may miss a Attached Namespace
Attribute Changed AEN.
Check if the NVME_AER_NOTICE_NS_CHANGED bit is set once the scan has
finished, and requeue scanning to pick up any missed change.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
governor
The min_limit perf and freq values can get disconnected with performance
governor, as we only modify the perf value in the special case. Fix that
by modifying the perf and freq values together
Fixes: 009d1c29a451 ("cpufreq/amd-pstate: Move perf values into a union")
Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250407081925.850473-1-dhananjay.ugwekar@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
This isn't fixing a real issue, but there's also zero point in going
through group and buffer setup, when the buffers are going to be
rejected once attempted to get used.
Cc: stable@vger.kernel.org
Reported-by: syzbot+58928048fd1416f1457c@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When XE_BO_FLAG_PINNED_NORESTORE and XE_BO_FLAG_PINNED_LATE_RESTORE were
added, they were assigned BO flag values in the middle of the flag
range, requiring renumbering of the higher flags. In both cases,
XE_BO_FLAG_CPU_ADDR_MIRROR was overlooked during renumbering because it
was defined below XE_BO_FLAG_GGTT_ALL and thus was not immediately
visible in code diffs changing this area of the code; this resulted in
XE_BO_FLAG_CPU_ADDR_MIRROR clashing with another flag.
Assign XE_BO_FLAG_CPU_ADDR_MIRROR a unique value, and also move the
definition of XE_BO_FLAG_GGTT_ALL down below all of the individual flags
so that this kind of mistake is less likely in the future. Also, while
we're at it, fix up some space vs tab whitespace inconsistency in these
flag definitions.
Fixes: 7f387e6012b6 ("drm/xe: add XE_BO_FLAG_PINNED_LATE_RESTORE")
Fixes: 045448da87bf ("drm/xe: Add XE_BO_FLAG_PINNED_NORESTORE")
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20250404220053.1758356-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
A preparation patch that separates the number of pages / folios from
the number of niovs. They will not match in the future to support huge
pages, improved dma mapping and/or larger chunk sizes.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/0780ac966ee84200385737f45bb0f2ada052392b.1743848231.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Refill queue lock and other bits are only used from the allocation path
on the rx softirq side, but it shares the cache line with other fields
like ctx that are used also in the "syscall" path, which causes cache
bouncing when softirq runs on a different CPU.
Separate them into different cache lines. The first one now contains
constant fields used by both contextx, followed by a line responsible
for refill queue data.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/6d1f598e27d623c07fc49d6baee13089a9b1216c.1743848241.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
intel_dp::mst.active_links actually indicates the number of MST streams,
not the number of MST links (one MST link carrying one or more MST
streams), rename the field accordingly.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250404150310.1156696-7-imre.deak@intel.com
|
|
Use intel_dp_mst_active_streams() everywhere, instead of open-coding it.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250404150310.1156696-6-imre.deak@intel.com
|
|
intel_dp_mst_active_streams()
It's not clear which encoder intel_dp_mst_encoder_active_links() refers
to (primary/stream), but there is also no reason to call the queried
property an encoder property; remove encoder from the name. Also it's
the number of MST streams being queried, vs. the number of MST links
(there is one MST link carrying one or more MST streams), so rename link
to stream as well.
While at it pass intel_dp to the function, which is more logical and
makes it easier to re-use the function later (without the need to get
the digital port pointer).
Also move the function earlier, next to the related ones.
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250404150310.1156696-5-imre.deak@intel.com
|
|
There doesn't seem to be a reason to assert for a non-negative stream
counter in intel_dp_check_mst_status() in particular, remove it. There
is now an equivalent assert in intel_dp_mst_dec_active_streams().
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250404150310.1156696-4-imre.deak@intel.com
|
|
Add helpers to increment/decrement the active MST stream count, instead
of open-coding these.
In mst_stream_pre_enable(), the increment will happen earlier, this is
ok, since nothing depends on the counter between the two points.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250404150310.1156696-3-imre.deak@intel.com
|
|
The intel_dp::link_trained flag indicates whether the link is active,
regardless of whether the link training passed or failed. For clarity
rename the flag to 'active'. While at it move the flag under
intel_dp::link.
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250404150310.1156696-2-imre.deak@intel.com
|
|
In certain scenarios, for example, during fuzz testing, the source
name may be NULL, which could lead to a kernel panic. Therefore, an
extra check for the source name should be added.
Fixes: a62a8ef9d97d ("virtio-fs: add virtiofs filesystem")
Cc: <stable@vger.kernel.org> # all LTS kernels
Signed-off-by: Xiangsheng Hou <xiangsheng.hou@mediatek.com>
Link: https://lore.kernel.org/20250407115111.25535-1-xiangsheng.hou@mediatek.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Fix devpts to parse uid and gid params using the correct type so that they
get interpreted in the context of the user namespace.
Fixes: cc0876f817d6 ("vfs: Convert devpts to use the new mount API")
Reported-by: Debarshi Ray <dray@redhat.com>
Closes: https://github.com/containers/podman/issues/25751
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/759134.1743596274@warthog.procyon.org.uk
cc: Eric Sandeen <sandeen@redhat.com>
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The .round_waveform_tohw() is supposed to return 1 if the requested
waveform cannot be implemented by rounding down all parameters. Also
adapt the corresponding comment to better describe why the implemented
procedure is right.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Tested-by: Trevor Gamblin <tgamblin@baylibre.com>
Link: https://lore.kernel.org/r/ba451573f0218d76645f068cec78bd97802cf010.1743844730.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
If another channel is already enabled period must not be modified. If
the requested period is smaller than this unchangable period the driver
is still supposed to search a duty_cycle according to the usual rounding
rules.
So don't set the duty_cycle to 0 but continue to determine an
appropriate value for ccr.
Fixes: deaba9cff809 ("pwm: stm32: Implementation of the waveform callbacks")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/f0c50df31daa3d6069bfa8d7fb3e71fae241b026.1743844730.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
Waveform parameters are supposed to be rounded down to the next value
possible for the hardware. However when a requested value is too small,
.round_waveform_tohw() is supposed to pick the next bigger value and
return 1. Let pwm_set_waveform() behave in the same way.
This creates consistency between pwm_set_waveform_might_sleep() with
exact=false and pwm_round_waveform_might_sleep() +
pwm_set_waveform_might_sleep() with exact=true.
The PWM_DEBUG rounding check has to be adapted to only trigger if no
uprounding happend.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Tested-by: Trevor Gamblin <tgamblin@baylibre.com>
Link: https://lore.kernel.org/r/353dc6ae31be815e41fd3df89c257127ca0d1a09.1743844730.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
Reimplement ast_mode_config_mode_valid() with DRM format helpers and
ast's helpers for framebuffer size calculation. Replaces ast's open-
coded assumptions on bpp and page-alignments.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250324094520.192974-4-tzimmermann@suse.de
|
|
The vaddr field in struct ast_plane serves no purpose. Its value
can be calculated easily from the VRAM base plus the plane offset.
Do so and remove the field.
In ast_primary_plane_helper_get_scanout_buffer(), remove the test
for vaddr being NULL. This cannot legally happen.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250324094520.192974-3-tzimmermann@suse.de
|
|
The ast driver protects the commit tail against concurrent reads
of the display modes by acquiring a lock. The comment is misleading
as the lock is not released in atomic_flush, but at the end of the
commit-tail helper. Rewrite the comment.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 1fe182154984 ("drm/ast: Acquire I/O-register lock in atomic_commit_tail function")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.2+
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250324094520.192974-2-tzimmermann@suse.de
|
|
Based on feedback from hardware folks, row[13] is part of the variable
bits within a physical row (along with all column bits).
Only half the physical addresses affected by a row are calculated if
this bit is not included.
Add the row[13] bit to the row retirement flow.
Fixes: 3b566b30b414 ("RAS/AMD/ATL: Add MI300 row retirement support")
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250401-fix-fmpm-extra-records-v1-1-840bcf7a8ac5@amd.com
|
|
Reuse existing code plumbing HDMI audio support and the existing HDMI
audio helpers that register HDMI codec device and plumb in the
DisplayPort audio interfaces to be handled by the drm_bridge_connector.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250314-dp-hdmi-audio-v6-3-dbd228fa73d7@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
It is common for the DisplayPort bridges to implement audio support. In
preparation to providing a generic framework for DP audio, add
corresponding interface to struct drm_bridge. As suggested by Maxime
for now this is mostly c&p of the corresponding HDMI audio API.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250314-dp-hdmi-audio-v6-2-dbd228fa73d7@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
As pointed out by Laurent, OP bits are supposed to describe operations.
Split DRM_BRIDGE_OP_HDMI_AUDIO from DRM_BRIDGE_OP_HDMI instead of
overloading DRM_BRIDGE_OP_HDMI.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250314-dp-hdmi-audio-v6-1-dbd228fa73d7@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Backmerging to get v6.15-rc1 into drm-misc-next. Also fixes a
build issue when enabling CONFIG_DRM_SCHED_KUNIT_TEST.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
Add the missing vrr parameters in vrr_params_changed() helper.
This ensures that changes in vrr.vsync_{start,end} trigger a call to
appropriate helpers to update the VRR registers.
Fixes: e8cd188e91bb ("drm/i915/display: Compute vrr_vsync params")
Cc: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Cc: Arun R Murthy <arun.r.murthy@intel.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: <stable@vger.kernel.org> # v6.10+
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250404080540.2059511-1-ankit.k.nautiyal@intel.com
|
|
Introduce a configuration option that allows users to build the
intel_pmc_ipc driver without ACPI support. This is useful for
systems where ACPI is not available or desired.
Based on the discussion from the patch [1], it was necessary to
provide this option to accommodate specific use cases.
Link: https://patchwork.kernel.org/project/netdevbpf/patch/20250227121522.1802832-6-yong.liang.choong@linux.intel.com/#26280764 [1]
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Co-developed-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Signed-off-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250313085526.1439092-1-yong.liang.choong@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Allow this bridge to be removable without dangling pointers and
use-after-free, together with proper use of drm_bridge_get() and _put() by
consumers.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250326-drm-bridge-refcount-v9-5-5e0661fe1f84@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
|
|
Allow this bridge to be removable without dangling pointers and
use-after-free, together with proper use of drm_bridge_get() and _put() by
consumers.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250326-drm-bridge-refcount-v9-4-5e0661fe1f84@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
|
|
All DRM bridges are now supposed to be allocated using
devm_drm_bridge_alloc(), which is cleaner and necessary to support
refcounting.
In the absence of a drm_bridge_init() or such initialization function,
document the new mandatory alloc function on the first DRM bridge core
function that is called after allocation, i.e. drm_bridge_add().
Suggested-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250326-drm-bridge-refcount-v9-3-5e0661fe1f84@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
|
|
DRM bridges are currently considered as a fixed element of a DRM card, and
thus their lifetime is assumed to extend for as long as the card
exists. New use cases, such as hot-pluggable hardware with video bridges,
require DRM bridges to be added to and removed from a DRM card without
tearing the card down. This is possible for connectors already (used by DP
MST), it is now needed for DRM bridges as well.
As a first preliminary step, make bridges reference-counted to allow a
struct drm_bridge (along with the private driver structure embedding it) to
stay allocated even after the driver has been removed, until the last
reference is put.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250326-drm-bridge-refcount-v9-2-5e0661fe1f84@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
|
|
Add a macro to allocate and initialize a DRM bridge embedded within a
private driver struct.
Compared to current practice, which is based on [devm_]kzalloc() allocation
followed by open-coded initialization of fields, this allows to have a
common and explicit API to allocate and initialize DRM bridges.
Besides being useful to consolidate bridge driver code, this is a
fundamental step in preparation for adding dynamic lifetime to bridges
based on refcount.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250326-drm-bridge-refcount-v9-1-5e0661fe1f84@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
|
|
PVH dom0 re-uses logic from PV dom0, in which RAM ranges not assigned to
dom0 are re-used as scratch memory to map foreign and grant pages. Such
logic relies on reporting those unpopulated ranges as RAM to Linux, and
mark them as reserved. This way Linux creates the underlying page
structures required for metadata management.
Such approach works fine on PV because the initial balloon target is
calculated using specific Xen data, that doesn't take into account the
memory type changes described above. However on HVM and PVH the initial
balloon target is calculated using get_num_physpages(), and that function
does take into account the unpopulated RAM regions used as scratch space
for remote domain mappings.
This leads to PVH dom0 having an incorrect initial balloon target, which
causes malfunction (excessive memory freeing) of the balloon driver if the
dom0 memory target is later adjusted from the toolstack.
Fix this by using xen_released_pages to account for any pages that are part
of the memory map, but are already unpopulated when the balloon driver is
initialized. This accounts for any regions used for scratch remote
mappings. Note on x86 xen_released_pages definition is moved to
enlighten.c so it's uniformly available for all Xen-enabled builds.
Take the opportunity to unify PV with PVH/HVM guests regarding the usage of
get_num_physpages(), as that avoids having to add different logic for PV vs
PVH in both balloon_add_regions() and arch_xen_unpopulated_init().
Much like a6aa4eb994ee, the code in this changeset should have been part of
38620fc4e893.
Fixes: a6aa4eb994ee ('xen/x86: add extra pages to unpopulated-alloc if available')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250407082838.65495-1-roger.pau@citrix.com>
|
|
The ovl_get_verity_xattr() function was never added, only its declaration.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Fixes: 184996e92e86 ("ovl: Validate verity xattr when resolving lowerdata")
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Alexander Larsson <alexl@redhat.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
In theory overlayfs could support upper layer directly referring to a data
layer, but there's no current use case for this.
Originally, when data-only layers were introduced, this wasn't allowed,
only introduced by the "datadir+" feature, but without actually handling
this case, resulting in an Oops.
Fix by disallowing datadir without lowerdir.
Reported-by: Giuseppe Scrivano <gscrivan@redhat.com>
Fixes: 24e16e385f22 ("ovl: add support for appending lowerdirs one by one")
Cc: <stable@vger.kernel.org> # v6.7
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Alexander Larsson <alexl@redhat.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
xen-acpi-processor functions under a PVH dom0 with only a
xen_initial_domain() runtime check. Change the Kconfig dependency from
PV dom0 to generic dom0 to reflect that.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Tested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250331172913.51240-1-jason.andryuk@amd.com>
|
|
Reduce the scope of some loop counters as these aren't needed outside
the loops they're used in.
Signed-off-by: Alexandru Dadu <alexandru.dadu@imgtec.com>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Link: https://lore.kernel.org/r/20250402-for-loop-counter-scope-v2-1-4fd550d22832@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
|
