summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-05-19crypto: testmgr - Add testing for async hashing and update/finalDavid S. Miller
Extend testmgr such that it tests async hash algorithms, and that for both sync and async hashes it tests both ->digest() and ->update()/->final() sequences. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-05-19crypto: tcrypt - Add speed tests for async hashingDavid S. Miller
These are invoked in the 'mode' range of 400 to 499. The cost of async vs. sync for the software algorithm implementations varies. It can be as low as 16 cycles but as much as a couple hundred. Here two runs of md5 testing, async then sync: testing speed of async md5 test 0 ( 16 byte blocks, 16 bytes per update, 1 updates): 2448 cycles/operation, 153 cycles/byte test 1 ( 64 byte blocks, 16 bytes per update, 4 updates): 4992 cycles/operation, 78 cycles/byte test 2 ( 64 byte blocks, 64 bytes per update, 1 updates): 3808 cycles/operation, 59 cycles/byte test 3 ( 256 byte blocks, 16 bytes per update, 16 updates): 14000 cycles/operation, 54 cycles/byte test 4 ( 256 byte blocks, 64 bytes per update, 4 updates): 8480 cycles/operation, 33 cycles/byte test 5 ( 256 byte blocks, 256 bytes per update, 1 updates): 7280 cycles/operation, 28 cycles/byte test 6 ( 1024 byte blocks, 16 bytes per update, 64 updates): 50016 cycles/operation, 48 cycles/byte test 7 ( 1024 byte blocks, 256 bytes per update, 4 updates): 22496 cycles/operation, 21 cycles/byte test 8 ( 1024 byte blocks, 1024 bytes per update, 1 updates): 21232 cycles/operation, 20 cycles/byte test 9 ( 2048 byte blocks, 16 bytes per update, 128 updates): 117184 cycles/operation, 57 cycles/byte test 10 ( 2048 byte blocks, 256 bytes per update, 8 updates): 43008 cycles/operation, 21 cycles/byte test 11 ( 2048 byte blocks, 1024 bytes per update, 2 updates): 40176 cycles/operation, 19 cycles/byte test 12 ( 2048 byte blocks, 2048 bytes per update, 1 updates): 39888 cycles/operation, 19 cycles/byte test 13 ( 4096 byte blocks, 16 bytes per update, 256 updates): 194176 cycles/operation, 47 cycles/byte test 14 ( 4096 byte blocks, 256 bytes per update, 16 updates): 84096 cycles/operation, 20 cycles/byte test 15 ( 4096 byte blocks, 1024 bytes per update, 4 updates): 78336 cycles/operation, 19 cycles/byte test 16 ( 4096 byte blocks, 4096 bytes per update, 1 updates): 77120 cycles/operation, 18 cycles/byte test 17 ( 8192 byte blocks, 16 bytes per update, 512 updates): 403056 cycles/operation, 49 cycles/byte test 18 ( 8192 byte blocks, 256 bytes per update, 32 updates): 166112 cycles/operation, 20 cycles/byte test 19 ( 8192 byte blocks, 1024 bytes per update, 8 updates): 154768 cycles/operation, 18 cycles/byte test 20 ( 8192 byte blocks, 4096 bytes per update, 2 updates): 151904 cycles/operation, 18 cycles/byte test 21 ( 8192 byte blocks, 8192 bytes per update, 1 updates): 155456 cycles/operation, 18 cycles/byte testing speed of md5 test 0 ( 16 byte blocks, 16 bytes per update, 1 updates): 2208 cycles/operation, 138 cycles/byte test 1 ( 64 byte blocks, 16 bytes per update, 4 updates): 5008 cycles/operation, 78 cycles/byte test 2 ( 64 byte blocks, 64 bytes per update, 1 updates): 3600 cycles/operation, 56 cycles/byte test 3 ( 256 byte blocks, 16 bytes per update, 16 updates): 14080 cycles/operation, 55 cycles/byte test 4 ( 256 byte blocks, 64 bytes per update, 4 updates): 8560 cycles/operation, 33 cycles/byte test 5 ( 256 byte blocks, 256 bytes per update, 1 updates): 7040 cycles/operation, 27 cycles/byte test 6 ( 1024 byte blocks, 16 bytes per update, 64 updates): 50592 cycles/operation, 49 cycles/byte test 7 ( 1024 byte blocks, 256 bytes per update, 4 updates): 22736 cycles/operation, 22 cycles/byte test 8 ( 1024 byte blocks, 1024 bytes per update, 1 updates): 24960 cycles/operation, 24 cycles/byte test 9 ( 2048 byte blocks, 16 bytes per update, 128 updates): 99312 cycles/operation, 48 cycles/byte test 10 ( 2048 byte blocks, 256 bytes per update, 8 updates): 43520 cycles/operation, 21 cycles/byte test 11 ( 2048 byte blocks, 1024 bytes per update, 2 updates): 40704 cycles/operation, 19 cycles/byte test 12 ( 2048 byte blocks, 2048 bytes per update, 1 updates): 39552 cycles/operation, 19 cycles/byte test 13 ( 4096 byte blocks, 16 bytes per update, 256 updates): 196720 cycles/operation, 48 cycles/byte test 14 ( 4096 byte blocks, 256 bytes per update, 16 updates): 85152 cycles/operation, 20 cycles/byte test 15 ( 4096 byte blocks, 1024 bytes per update, 4 updates): 79408 cycles/operation, 19 cycles/byte test 16 ( 4096 byte blocks, 4096 bytes per update, 1 updates): 76816 cycles/operation, 18 cycles/byte test 17 ( 8192 byte blocks, 16 bytes per update, 512 updates): 391520 cycles/operation, 47 cycles/byte test 18 ( 8192 byte blocks, 256 bytes per update, 32 updates): 168464 cycles/operation, 20 cycles/byte test 19 ( 8192 byte blocks, 1024 bytes per update, 8 updates): 156912 cycles/operation, 19 cycles/byte test 20 ( 8192 byte blocks, 4096 bytes per update, 2 updates): 154016 cycles/operation, 18 cycles/byte test 21 ( 8192 byte blocks, 8192 bytes per update, 1 updates): 153856 cycles/operation, 18 cycles/byte We can ditch the sync hash code at some point if we feel that makes sense. For now I've left it there. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-05-19crypto: scatterwalk - Fix scatterwalk_done() testDavid S. Miller
We are done with the scattergather entry when the walk offset goes past sg->offset + sg->length, not when it crosses a page boundary. There is a similarly queer test in the second half of scatterwalk_pagedone() that probably needs some scrutiny. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-05-19crypto: hifn_795x - Rename ablkcipher_walk to hifn_cipher_walkDavid S. Miller
This is in preparation for the generic ablkcipher_walk helpers that will be added to the crypto layer. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-05-19padata: Use get_online_cpus/put_online_cpus in padata_freeSteffen Klassert
Add get_online_cpus/put_online_cpus to ensure that no cpu goes offline during the flushing of the padata percpu queues. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-05-19padata: Add some code commentsSteffen Klassert
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-05-19padata: Flush the padata queues activelySteffen Klassert
yield was used to wait until all references of the internal control structure in use are dropped before it is freed. This patch implements padata_flush_queues which actively flushes the padata percpu queues in this case. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-05-19padata: Use a timer to handle remaining objects in the reorder queues Steffen Klassert
padata_get_next needs to check whether the next object that need serialization must be parallel processed by the local cpu. This check was wrong implemented and returned always true, so the try_again loop in padata_reorder was never taken. This can lead to object leaks in some rare cases due to a race that appears with the trylock in padata_reorder. The try_again loop was not a good idea after all, because a cpu could take that loop frequently, so we handle this with a timer instead. This patch adds a timer to handle the race that appears with the trylock. If cpu1 queues an object to the reorder queue while cpu2 holds the pd->lock but left the while loop in padata_reorder already, cpu2 can't care for this object and cpu1 exits because it can't get the lock. Usually the next cpu that takes the lock cares for this object too. We need the timer just if this object was the last one that arrives to the reorder queues. The timer function sends it out in this case. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-05-19drm/nv50: fix monitor detection on certain chipsetsBen Skeggs
There appears to be some kind of switch on certain chips to control whether the DP auxch or traditional i2c bus will be operational on a connector, this commit hopefully fixes nouveau to do the right thing. Likely only relevent on chips with DP outputs. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-05-19drm/nv50: store full dcb i2c entry from vbiosBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-05-19drm/nv50: fix suspend/resume with DP outputsBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-05-19drm/nv50: output calculated crtc pll when debugging onBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-05-19drm/nouveau: dump pll limits entries when debugging is onBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-05-19drm/nouveau: bios parser fixes for eDP boardsBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-05-19drm/nouveau: fix a nouveau_bo dereference after it's been destroyedBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-05-19drm/nv40: remove some completed ctxprog TODOsBen Skeggs
I actually thought these were gone already when the initial commit was done.. I guess not! Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-05-19drm/nv04: Implement missing nv04 PGRAPH methods in software.Marcin Kościelnicki
Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-05-19drm/nouveau: Use 0x5f instead of 0x9f as imageblit on original NV10.Marcin Kościelnicki
Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-05-18ixgbe: add support for active DA cablesDon Skidmore
This patch adds support of active DA cables. This is renaming and adding some PHY type enumerations. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18ixgbe: dcb, do not tag tc_prio_control framesJohn Fastabend
The network stack indicate packets should not be DCB tagged by setting the priority to TC_PRIO_CONTROL. One usage for this is lldp frames which are not suppossed to be tagged. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18ixgbe: fix ixgbe_tx_is_paused logicJohn Fastabend
The TFCS bits show the current XON state. Meaning that the device is paused if these bits are 0. This fixes the logic to work as it was intended. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18ixgbe: always enable vlan strip/insert when DCB is enabledYi Zou
when DCB mode is on, we want the HW VLAN stripping to be always enabled. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18ixgbe: remove some redundant code in setting FCoE FIP filterYi Zou
The ETQS setup for FIP out side the if..else is enough for the ETQS setup for FIP, so remove redundant code. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18ixgbe: fix wrong offset to fc_frame_header in ixgbe_fcoe_ddpYi Zou
Make sure we point to the right offset of the fc_frame_header when VLAN header exists and HW has VLAN stripping disabled. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18ixgbe: fix header len when unsplit packet overflows to data bufferShannon Nelson
When in packet split mode, packet type is not recognized, and the packet is larger than the header size, the 82599 overflows the packet into the data area, but doesn't set the HDR_LEN field. We can safely assume the length is the current header size. This fixes an obscure corner case that can be triggered by non-ip packet headers or (more likely) by disabling the L2 packet recognition. Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-19crypto: shash - Remove usage of CRYPTO_MINALIGNHerbert Xu
The macro CRYPTO_MINALIGN is not meant to be used directly. This patch replaces it with crypto_tfm_ctx_alignment. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-05-19drm/radeon: fix hdmi offset bug reported by smatch.Dave Airlie
Reported-by: Dan Carpenter Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-19drm/radeon/kms: hpd cleanupAlex Deucher
- Use radeon hpd enum consistently (in both hotplug and dp) - Legacy r100 with DVI should be HPD_1 not NONE Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-19drm/radeon/kms: reset ddc_bus in object header parsingAlex Deucher
Some LVDS connectors don't have a ddc bus, so reset the ddc bus to invalid before parsing the next connector to avoid using stale ddc bus data. Should fix fdo bug 28164. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-19amd64-agp: Probe unknown AGP devices the right wayBen Hutchings
The current initialisation code probes 'unsupported' AGP devices simply by calling its own probe function. It does not lock these devices or even check whether another driver is already bound to them. We must use the device core to manage this. So if the specific device id table didn't match anything and agp_try_unsupported=1, switch the device id table and call driver_attach() again. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-19sis-agp: Remove SIS 760, handled by amd64-agpBen Hutchings
SIS 760 is listed in the device tables for both amd64-agp and sis-agp. amd64-agp is apparently preferable since it has workarounds for some BIOS misconfigurations that sis-agp doesn't handle. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18ocfs2: Silence a gcc warning.Joel Becker
ocfs2_block_group_claim_bits() is never called with min_bits=0, but we shouldn't leave status undefined if it ever is. Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-05-18ocfs2: Don't retry xattr set in case value extension fails.Tao Ma
In normal xattr set, the set sequence is inode, xattr block and finally xattr bucket if we meet with a ENOSPC. But there is a corner case. So consider we will set a xattr whose value will be stored in a cluster, and there is no xattr block by now. So we will reserve 1 xattr block and 1 cluster for setting it. Now if we fail in value extension(in case the volume is almost full and we can't allocate the cluster because the check in ocfs2_test_bg_bit_allocatable), ENOSPC will be returned. So we will try to create a bucket(this time there is a chance that the reserved cluster will be used), and when we try value extension again, kernel bug happens. We did meet with it. Check the bug below. http://oss.oracle.com/bugzilla/show_bug.cgi?id=1251 This patch just try to avoid this by adding a set_abort in ocfs2_xattr_set_ctxt, so in case ENOSPC happens in value extension, we will check whether it is caused by the real ENOSPC or just the full of inode or xattr block. If it is the first case, we set set_abort so that we don't try any further. we are safe to exit directly here ince it is really ENOSPC. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-05-18ocfs2:dlm: avoid dlm->ast_lock lockres->spinlock dependency breakWengang Wang
Currently we process a dirty lockres with the lockres->spinlock taken. While during the process, we may need to lock on dlm->ast_lock. This breaks the dependency of dlm->ast_lock(lock first) and lockres->spinlock(lock second). This patch fixes the problem. Since we can't release lockres->spinlock, we have to take dlm->ast_lock just before taking the lockres->spinlock and release it after lockres->spinlock is released. And use __dlm_queue_bast()/__dlm_queue_ast(), the nolock version, in dlm_shuffle_lists(). There are no too many locks on a lockres, so there is no performance harm. Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-05-18ocfs2: Reset xattr value size after xa_cleanup_value_truncate().Tao Ma
In ocfs2_prepare_xattr_entry, if we fail to grow an existing value, xa_cleanup_value_truncate() will leave the old entry in place. Thus, we reset its value size. However, if we were allocating a new value, we must not reset the value size or we will BUG(). This resolves oss.oracle.com bug 1247. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-05-18Merge branch 'discontig-bg' of git://oss.oracle.com/git/tma/linux-2.6 into ↵Joel Becker
ocfs2-merge-window
2010-05-19Merge remote branch 'anholt/drm-intel-next' into drm-nextDave Airlie
* anholt/drm-intel-next: (515 commits) drm/i915: Fix out of tree builds drm/i915: move fence lru to struct drm_i915_fence_reg drm/i915: don't allow tiling changes on pinned buffers v2 drm/i915: Be extra careful about A/D matching for multifunction SDVO drm/i915: Fix DDC bus selection for multifunction SDVO drm/i915: cleanup mode setting before unmapping registers drm/i915: Make fbc control wrapper functions drm/i915: Wait for the GPU whilst shrinking, if truly desperate. drm/i915: Use spatio-temporal dithering on PCH [MTD] Remove zero-length files mtdbdi.c and internal.ho pata_pcmcia / ide-cs: Fix bad hashes for Transcend and kingston IDs libata: Fix several inaccuracies in developer's guide slub: Fix bad boundary check in init_kmem_cache_nodes() raid6: fix recovery performance regression KEYS: call_sbin_request_key() must write lock keyrings before modifying them KEYS: Use RCU dereference wrappers in keyring key type code KEYS: find_keyring_by_name() can gain access to a freed keyring ALSA: hda: Fix 0 dB for Packard Bell models using Conexant CX20549 (Venice) ALSA: hda - Add quirk for Dell Inspiron 19T using a Conexant CX20582 ALSA: take tu->qlock with irqs disabled ...
2010-05-18Revert "nfsd4: distinguish expired from stale stateids"J. Bruce Fields
This reverts commit 78155ed75f470710f2aecb3e75e3d97107ba8374. We're depending here on the boot time that we use to generate the stateid being monotonic, but get_seconds() is not necessarily. We still depend at least on boot_time being different every time, but that is a safer bet. We have a few reports of errors that might be explained by this problem, though we haven't been able to confirm any of them. But the minor gain of distinguishing expired from stale errors seems not worth the risk. Conflicts: fs/nfsd/nfs4state.c Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2010-05-18ipv6: Never schedule DAD timer on dead addressHerbert Xu
This patch ensures that all places that schedule the DAD timer look at the address state in a safe manner before scheduling the timer. This ensures that we don't end up with pending timers after deleting an address. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18ipv6: Use POSTDAD stateHerbert Xu
This patch makes use of the new POSTDAD state. This prevents a race between DAD completion and failure. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18ipv6: Use state_lock to protect ifa stateHerbert Xu
This patch makes use of the new state_lock to synchronise between updates to the ifa state. This fixes the issue where a remotely triggered address deletion (through DAD failure) coincides with a local administrative address deletion, causing certain actions to be performed twice incorrectly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18ipv6: Replace inet6_ifaddr->dead with stateHerbert Xu
This patch replaces the boolean dead flag on inet6_ifaddr with a state enum. This allows us to roll back changes when deleting an address according to whether DAD has completed or not. This patch only adds the state field and does not change the logic. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18sparc: Define ARCH_SLAB_MINALIGNDavid S. Miller
Because SLOB fancies being different, the default minimum alignment is only "unsigned long" instead of SLAB/SLUB where the default is "unsigned long long" The inconsistency makes no sense and is asking for trouble, but define ARCH_SLAB_MINALIGN to get it right in all cases even after they fix the inconsistency. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18cxgb4: notify upper drivers if the device is already up when they loadDimitris Michailidis
Upper layer drivers aren't notified that a device is ready if their modules load after the device becomes ready. Add the missing notification. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18cxgb4: keep interrupts available when the ports are brought downDimitris Michailidis
The PF driver needs to remain alert while its ports are down to service requests or errors from virtual functions or FW so keep interrupts and queues available when the ports are brought down. The change makes open_device_map unnecessary so remove it. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18cxgb4: fix initial addition of MAC addressDimitris Michailidis
The call to add the MAC address during link initialization wasn't adding the address to one of the HW tables. Fix. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18cnic: Return SPQ credit to bnx2x after ring setup and shutdown.Michael Chan
Everytime the iSCSI ring finishes setup or shutdown, we need to return the SPQ (slow path queue) credit to the bnx2x driver. Without this step, the SPQ will eventually be full causing iSCSI to fail. This can happen after 3 or 4 MTU changes for example. Add code to wait for these slow path commands to complete in the RX ring and return the SPQ credit to bnx2x. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18cnic: Convert cnic_local_flags to atomic ops.Michael Chan
It is easier to expand the flags for other purposes because it does not require a spin_lock. The next bug fix patch needs a flag in cnic_local_flags. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18of: eliminate of_device->node and dev_archdata->{of,prom}_nodeGrant Likely
This patch eliminates the node pointer from struct of_device and the of_node (or prom_node) pointer from struct dev_archdata since the node pointer is now part of struct device proper when CONFIG_OF is set, and all users of the old pointer locations have already been converted over to use device->of_node. Also remove dev_archdata_{get,set}_node() as it is no longer used by anything. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-18of: Always use 'struct device.of_node' to get device node pointer.Grant Likely
The following structure elements duplicate the information in 'struct device.of_node' and so are being eliminated. This patch makes all readers of these elements use device.of_node instead. (struct of_device *)->node (struct dev_archdata *)->prom_node (sparc) (struct dev_archdata *)->of_node (powerpc & microblaze) Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
generated by cgit (git 2.34.1) at 2025-09-22 16:50:40 +0000