| Age | Commit message (Collapse) | Author |
|---|
|
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (scsi_debug, ufs, lpfc, st, fnic, mpi3mr,
mpt3sas) and the removal of cxlflash.
The only non-trivial core change is an addition to unit attention
handling to recognize UAs for power on/reset and new media so the tape
driver can use it"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (107 commits)
scsi: st: Tighten the page format heuristics with MODE SELECT
scsi: st: ERASE does not change tape location
scsi: st: Fix array overflow in st_setup()
scsi: target: tcm_loop: Fix wrong abort tag
scsi: lpfc: Restore clearing of NLP_UNREG_INP in ndlp->nlp_flag
scsi: hisi_sas: Fixed failure to issue vendor specific commands
scsi: fnic: Remove unnecessary NUL-terminations
scsi: fnic: Remove redundant flush_workqueue() calls
scsi: core: Use a switch statement when attaching VPD pages
scsi: ufs: renesas: Add initialization code for R-Car S4-8 ES1.2
scsi: ufs: renesas: Add reusable functions
scsi: ufs: renesas: Refactor 0x10ad/0x10af PHY settings
scsi: ufs: renesas: Remove register control helper function
scsi: ufs: renesas: Add register read to remove save/set/restore
scsi: ufs: renesas: Replace init data by init code
scsi: ufs: dt-bindings: renesas,ufs: Add calibration data
scsi: mpi3mr: Task Abort EH Support
scsi: storvsc: Don't report the host packet status as the hv status
scsi: isci: Make most module parameters static
scsi: megaraid_sas: Make most module parameters static
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata updates from Niklas Cassel:
- Add 'external' to the libata.force module parameter, in order to
allow a user to workaround broken firmware (me)
- Use the str_up_down() helper in the sata_via driver (Salah Triki)
- Convert the Freescale PowerQUICC SATA device tree binding to YAML
(J. Neuschäfer)
- Do not use ATAPI DMA for a device that only supports PIO (me)
- Add Marvell 88SE9215 PCI device ID to the ahci driver. Since the
controller has quirks, it cannot rely on the generic AHCI PCI class
code entry (Daniel Kral)
- Improve the return value of atapi_check_dma() (Huacai Chen)
- Fix the NCQ Non-Data log not supported print to actually reference
the correct log (me)
- Make Marvel 88SE9215 prefer DMA for ATAPI devices (Huacai Chen)
- Simplify the AHCI IRQ vector allocations by performing the IRQ vector
allocations in the same function, regardless of IRQ type (Tomas
Henzl)
* tag 'ata-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: ahci: simplify init function
ahci: Marvell 88SE9215 controllers prefer DMA for ATAPI
ata: libata: Fix NCQ Non-Data log not supported print
ata: libata: Improve return value of atapi_check_dma()
ahci: add PCI ID for Marvell 88SE9215 SATA Controller
ata: libata-eh: Do not use ATAPI DMA for a device limited to PIO mode
dt-bindings: ata: Convert fsl,pq-sata to YAML
ata: sata_via: Use str_up_down() helper in vt6420_prereset()
ata: libata-core: Add 'external' to the libata.force kernel parameter
|
|
Remove unnecessary semicolons reported by Coccinelle/coccicheck and the
semantic patch at scripts/coccinelle/misc/semicolon.cocci.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
The existing check_and_ack() function had unnecessary complexity. The
logic could be streamlined to improve code readability and maintainability.
The command update register needs to be updated in order to acknowledge
the platform notification through type 4 channel. So it can be done
unconditionally. Currently it is complicated just to make use of
pcc_send_data() which also executes the same updation.
In order to simplify, let us just ring the doorbell directly from
check_and_ack() instead of calling into pcc_send_data(). While at it,
rename it into pcc_chan_check_and_ack() to maintain consistency in the
driver.
Acked-by: Huisong Li <lihuisong@huawei.com>
Tested-by: Adam Young <admiyo@os.amperecomputing.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Currently the shared memory communication address was mapped by the
mailbox client drivers leading to all sorts of inconsistencies.
It also has resulted in the inconsistent attributes used while mapping
the shared memory regions.
In order to remove/eliminate any issues, let us ensures the shared
memory address is always mapped and unmapped when the PCC channels are
requested and release.
We need to map them as the ACPI PCCT associates these shared memory
with each channel subspace and may need use the status or the flags in
the headers of those shared memory communication address regions to
manage the transport/channel.
Note, until all the drivers using PCC start using this mapped shmem,
there might be double mapping of the shared memory address. This
shouldn't have any impact on existing mbox client drivers.
Since there are no users of pcc_chan_ioremap() and also it is mapped
by default, we can stop exporting it and merge the functionality into
pcc_mbox_request_channel().
Acked-by: Huisong Li <lihuisong@huawei.com>
Tested-by: Huisong Li <lihuisong@huawei.com>
Tested-by: Adam Young <admiyo@os.amperecomputing.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
The existing error handling logic in pcc_mbox_irq() is intermixed with the
main flow of the function. The command complete check and the complete
complete update/acknowledgment are nicely factored into separate functions.
Moves error detection and clearing logic into a separate function called:
pcc_mbox_error_check_and_clear() by extracting error-handling logic from
pcc_mbox_irq().
This ensures error checking and clearing are handled separately and it
improves maintainability by keeping the IRQ handler focused on processing
events.
Acked-by: Huisong Li <lihuisong@huawei.com>
Tested-by: Huisong Li <lihuisong@huawei.com>
Tested-by: Adam Young <admiyo@os.amperecomputing.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
The Platform Communication Channel (PCC) mailbox driver currently uses
ioremap() to map channel shared memory regions. However it is preferred
to use acpi_os_ioremap(), which is mapping function specific to EFI/ACPI
defined memory regions. It ensures that the correct memory attributes
are applied when mapping ACPI-provided regions.
While at it, also add checks for handling any errors with the mapping.
Acked-by: Huisong Li <lihuisong@huawei.com>
Tested-by: Huisong Li <lihuisong@huawei.com>
Tested-by: Adam Young <admiyo@os.amperecomputing.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
pcc_mbox_cmd_complete_check() accesses pchan->cmd_complete.gas to check
command completion status. Even if GAS is NULL, pcc_chan_reg_read() gets
called which returns success doing nothing and then we return.
Add an early return if pchan->cmd_complete.gas == NULL before performing
any operations.
Acked-by: Huisong Li <lihuisong@huawei.com>
Tested-by: Huisong Li <lihuisong@huawei.com>
Tested-by: Adam Young <admiyo@os.amperecomputing.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
The Sparse static checker flags a type mismatch warning related to
endianness conversion:
| warning: incorrect type in argument 1 (different base types)
| expected restricted __le32 const [usertype] *p
| got unsigned int *
This is because an explicit endianness conversion (le32_to_cpu()) was
applied unnecessarily to a pcc_hdr.flags field that is already in
little-endian format.
The PCC driver is only enabled on little-endian kernels due to its
dependency on ACPI and EFI, making the explicit conversion unnecessary.
The redundant conversion occurs in pcc_chan_check_and_ack() for the
pcc_hdr.flags field. Drop this unnecessary endianness conversion of
pcc_hdr.flags.
Also drop the redundant PCC_ACK_FLAG_MASK definition and use the
more appropriate and already defined PCC_CMD_COMPLETION_NOTIFY.
Acked-by: Huisong Li <lihuisong@huawei.com>
Tested-by: Adam Young <admiyo@os.amperecomputing.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
The PCC mailbox interrupt handler (pcc_mbox_irq()) currently checks
for command completion flags and any error status before clearing the
interrupt.
The below sequence highlights an issue in the handling of PCC mailbox
interrupts, specifically when dealing with doorbell notifications and
acknowledgment between the OSPM and the platform where type3 and type4
channels are sharing the interrupt.
-------------------------------------------------------------------------
| T | Platform Firmware | OSPM/Linux PCC driver |
|---|---------------------------------|---------------------------------|
| 1 | | Build message in shmem |
| 2 | | Ring Type3 chan doorbell |
| 3 | Receives the doorbell interrupt | |
| 4 | Process the message from OSPM | |
| 5 | Build response for the message | |
| 6 | Ring Platform ACK interrupt on | |
| | Type3 chan to OSPM | Received the interrupt |
| 7 | Build Notification in Type4 Chan| |
| 8 | | Start processing interrupt in |
| | | pcc_mbox_irq() handler |
| 9 | | Enter PCC handler for Type4 chan|
|10 | | Check command complete cleared |
|11 | | Read the notification |
|12 | | Clear Platform ACK interrupt |
| | No effect from the previous step yet as the Platform ACK |
| | interrupt has not yet been triggered for this channel |
|13 | Ring Platform ACK interrupt on | |
| | Type4 chan to OSPM | |
|14 | | Enter PCC handler for Type3 chan|
|15 | | Command complete is set. |
|16 | | Read the response. |
|17 | | Clear Platform ACK interrupt |
|18 | | Leave PCC handler for Type3 |
|19 | | Leave pcc_mbox_irq() handler |
|20 | | Re-enter pcc_mbox_irq() handler |
|21 | | Enter PCC handler for Type4 chan|
|22 | | Leave PCC handler for Type4 chan|
|23 | | Enter PCC handler for Type3 chan|
|24 | | Leave PCC handler for Type3 chan|
|25 | | Leave pcc_mbox_irq() handler |
-------------------------------------------------------------------------
The key issue occurs when OSPM tries to acknowledge platform ack
interrupt for a notification which is ready to be read and processed
but the interrupt itself is not yet triggered by the platform.
This ineffective acknowledgment leads to an issue later in time where
the interrupt remains pending as we exit the interrupt handler without
clearing the platform ack interrupt as there is no pending response or
notification. The interrupt acknowledgment order is incorrect.
To resolve this issue, the platform acknowledgment interrupt should
always be cleared before processing the interrupt for any notifications
or response.
Reported-by: Robbie King <robbiek@xsightlabs.com>
Reviewed-by: Huisong Li <lihuisong@huawei.com>
Tested-by: Huisong Li <lihuisong@huawei.com>
Tested-by: Adam Young <admiyo@os.amperecomputing.com>
Tested-by: Robbie King <robbiek@xsightlabs.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
The function mbox_chan_received_data() calls the Rx callback of the
mailbox client driver. The callback might set chan_in_use flag from
pcc_send_data(). This flag's status determines whether the PCC channel
is in use.
However, there is a potential race condition where chan_in_use is
updated incorrectly due to concurrency between the interrupt handler
(pcc_mbox_irq()) and the command sender(pcc_send_data()).
The 'chan_in_use' flag of a channel is set to true after sending a
command. And the flag of the new command may be cleared erroneous by
the interrupt handler afer mbox_chan_received_data() returns,
As a result, the interrupt being level triggered can't be cleared in
pcc_mbox_irq() and it will be disabled after the number of handled times
exceeds the specified value. The error log is as follows:
| kunpeng_hccs HISI04B2:00: PCC command executed timeout!
| kunpeng_hccs HISI04B2:00: get port link status info failed, ret = -110
| irq 13: nobody cared (try booting with the "irqpoll" option)
| Call trace:
| dump_backtrace+0x0/0x210
| show_stack+0x1c/0x2c
| dump_stack+0xec/0x130
| __report_bad_irq+0x50/0x190
| note_interrupt+0x1e4/0x260
| handle_irq_event+0x144/0x17c
| handle_fasteoi_irq+0xd0/0x240
| __handle_domain_irq+0x80/0xf0
| gic_handle_irq+0x74/0x2d0
| el1_irq+0xbc/0x140
| mnt_clone_write+0x0/0x70
| file_update_time+0xcc/0x160
| fault_dirty_shared_page+0xe8/0x150
| do_shared_fault+0x80/0x1d0
| do_fault+0x118/0x1a4
| handle_pte_fault+0x154/0x230
| __handle_mm_fault+0x1ac/0x390
| handle_mm_fault+0xf0/0x250
| do_page_fault+0x184/0x454
| do_translation_fault+0xac/0xd4
| do_mem_abort+0x44/0xb4
| el0_da+0x40/0x74
| el0_sync_handler+0x60/0xb4
| el0_sync+0x168/0x180
| handlers:
| pcc_mbox_irq
| Disabling IRQ #13
To solve this issue, pcc_mbox_irq() must clear 'chan_in_use' flag before
the call to mbox_chan_received_data().
Tested-by: Adam Young <admiyo@os.amperecomputing.com>
Tested-by: Robbie King <robbiek@xsightlabs.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
(sudeep.holla: Minor updates to the subject, commit message and comment)
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Add the mailbox compatible for MSM8226 SoC.
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Add compatible string "fsl,imx94-mu" for the i.MX94 chip, which is backward
compatible with i.MX95. Set it to fall back to "fsl,imx95-mu".
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Add mailbox API tree type and location. It helps contributors know
what's currently queued.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
There's nothing used from these header files, remove their inclusion.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Don't rely on those including the header file to already include the
needed <linux/bits.h>. Include it in the header file.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Sorting headers alphabetically helps locating duplicates,
and makes it easier to figure out where to insert new headers.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
There are no concurrency problems if multiple consumers parse the
phandle, don't gratuiously protect the parsing with the mutex used
for the controllers list.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
In case of error, of_parse_phandle_with_args() returns -EINVAL when the
passed index is negative, or -ENOENT when the index is for an empty
phandle. The mailbox core overwrote the error return code with a less
precise -ENODEV. Use the error returned code from
of_parse_phandle_with_args().
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
'struct amba_id' table is not modified so can be changed to const for
more safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
'struct amba_id' table is not modified so can be changed to const for
more safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
'struct amba_id' table is not modified so can be changed to const for
more safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
'struct amba_id' table is not modified so can be changed to const for
more safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
set_destination() and clear_destination() are static functions not used
anywhere in the code:
pl320-ipc.c:48:20: error: unused function 'set_destination' [-Werror,-Wunused-function]
pl320-ipc.c:54:20: error: unused function 'clear_destination' [-Werror,-Wunused-function]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Tegra264 has updated HSP_INT_DIMENSIONING register as follows:
* nSI is now BIT17:BIT21.
* nDB is now BIT12:BIT16.
Currently, we are using a static macro HSP_nINT_MASK to get the values
from HSP_INT_DIMENSIONING register. This results in wrong values for nSI
for HSP instances that supports 16 shared interrupts.
Define dimensioning masks in soc data and use them to parse nSI, nDB,
nAS, nSS & nSM values.
Fixes: 602dbbacc3ef ("mailbox: tegra: add support for Tegra264")
Cc: stable@vger.kernel.org
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Add the compatible name and iommus property for MT8196.
In MT8196, all command buffers allocated and used by the GCE device
work with IOMMU.
Signed-off-by: Jason-JH Lin <jason-jh.lin@mediatek.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Every client driver has the struct cmdq_client information, so
it's not necessary to store it in struct cmdq_pkt. cl is used to
store struct cmdq_client information and now no client driver use
it, so remove it.
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Pull block updates from Jens Axboe:
- Fixes for integrity handling
- NVMe pull request via Keith:
- Secure concatenation for TCP transport (Hannes)
- Multipath sysfs visibility (Nilay)
- Various cleanups (Qasim, Baruch, Wang, Chen, Mike, Damien, Li)
- Correct use of 64-bit BARs for pci-epf target (Niklas)
- Socket fix for selinux when used in containers (Peijie)
- MD pull request via Yu:
- fix recovery can preempt resync (Li Nan)
- fix md-bitmap IO limit (Su Yue)
- fix raid10 discard with REQ_NOWAIT (Xiao Ni)
- fix raid1 memory leak (Zheng Qixing)
- fix mddev uaf (Yu Kuai)
- fix raid1,raid10 IO flags (Yu Kuai)
- some refactor and cleanup (Yu Kuai)
- Series cleaning up and fixing bugs in the bad block handling code
- Improve support for write failure simulation in null_blk
- Various lock ordering fixes
- Fixes for locking for debugfs attributes
- Various ublk related fixes and improvements
- Cleanups for blk-rq-qos wait handling
- blk-throttle fixes
- Fixes for loop dio and sync handling
- Fixes and cleanups for the auto-PI code
- Block side support for hardware encryption keys in blk-crypto
- Various cleanups and fixes
* tag 'for-6.15/block-20250322' of git://git.kernel.dk/linux: (105 commits)
nvmet: replace max(a, min(b, c)) by clamp(val, lo, hi)
nvme-tcp: fix selinux denied when calling sock_sendmsg
nvmet: pci-epf: Always configure BAR0 as 64-bit
nvmet: Remove duplicate uuid_copy
nvme: zns: Simplify nvme_zone_parse_entry()
nvmet: pci-epf: Remove redundant 'flush_workqueue()' calls
nvmet-fc: Remove unused functions
nvme-pci: remove stale comment
nvme-fc: Utilise min3() to simplify queue count calculation
nvme-multipath: Add visibility for queue-depth io-policy
nvme-multipath: Add visibility for numa io-policy
nvme-multipath: Add visibility for round-robin io-policy
nvmet: add tls_concat and tls_key debugfs entries
nvmet-tcp: support secure channel concatenation
nvmet: Add 'sq' argument to alloc_ctrl_args
nvme-fabrics: reset admin connection for secure concatenation
nvme-tcp: request secure channel concatenation
nvme-keyring: add nvme_tls_psk_refresh()
nvme: add nvme_auth_derive_tls_psk()
nvme: add nvme_auth_generate_digest()
...
|
|
Pull io_uring updates from Jens Axboe:
"This is the first of the io_uring pull requests for the 6.15 merge
window, there will be others once the net tree has gone in. This
contains:
- Cleanup and unification of cancelation handling across various
request types.
- Improvement for bundles, supporting them both for incrementally
consumed buffers, and for non-multishot requests.
- Enable toggling of using iowait while waiting on io_uring events or
not. Unfortunately this is still tied with CPU frequency boosting
on short waits, as the scheduler side has not been very receptive
to splitting the (useless) iowait stat from the cpufreq implied
boost.
- Add support for kbuf nodes, enabling zero-copy support for the ublk
block driver.
- Various cleanups for resource node handling.
- Series greatly cleaning up the legacy provided (non-ring based)
buffers. For years, we've been pushing the ring provided buffers as
the way to go, and that is what people have been using. Reduce the
complexity and code associated with legacy provided buffers.
- Series cleaning up the compat handling.
- Series improving and cleaning up the recvmsg/sendmsg iovec and msg
handling.
- Series of cleanups for io-wq.
- Start adding a bunch of selftests. The liburing repository
generally carries feature and regression tests for everything, but
at least for ublk initially, we'll try and go the route of having
it in selftests as well. We'll see how this goes, might decide to
migrate more tests this way in the future.
- Various little cleanups and fixes"
* tag 'for-6.15/io_uring-20250322' of git://git.kernel.dk/linux: (108 commits)
selftests: ublk: add stripe target
selftests: ublk: simplify loop io completion
selftests: ublk: enable zero copy for null target
selftests: ublk: prepare for supporting stripe target
selftests: ublk: move common code into common.c
selftests: ublk: increase max buffer size to 1MB
selftests: ublk: add single sqe allocator helper
selftests: ublk: add generic_01 for verifying sequential IO order
selftests: ublk: fix starting ublk device
io_uring: enable toggle of iowait usage when waiting on CQEs
selftests: ublk: fix write cache implementation
selftests: ublk: add variable for user to not show test result
selftests: ublk: don't show `modprobe` failure
selftests: ublk: add one dependency header
io_uring/kbuf: enable bundles for incrementally consumed buffers
Revert "io_uring/rsrc: simplify the bvec iter count calculation"
selftests: ublk: improve test usability
selftests: ublk: add stress test for covering IO vs. killing ublk server
selftests: ublk: add one stress test for covering IO vs. removing device
selftests: ublk: load/unload ublk_drv when preparing & cleaning up tests
...
|
|
Samuel Holland <samuel.holland@sifive.com> says:
Currently, RISC-V NOMMU kernels are linked at CONFIG_PAGE_OFFSET, and
since they are not relocatable, must be loaded at this address as well.
CONFIG_PAGE_OFFSET is not a user-visible Kconfig option, so its value is
not obvious, and users must patch the kernel source if they want to load
it at a different address.
Make NOMMU kernels more portable by making them relocatable by default.
This allows a single kernel binary to work when loaded at any address.
* b4-shazam-merge:
riscv: Remove CONFIG_PAGE_OFFSET
riscv: Support CONFIG_RELOCATABLE on riscv32
asm-generic: Always define Elf_Rel and Elf_Rela
riscv: Support CONFIG_RELOCATABLE on NOMMU
riscv: Allow NOMMU kernels to access all of RAM
riscv: Remove duplicate CONFIG_PAGE_OFFSET definition
Link: https://lore.kernel.org/r/20241026171441.3047904-1-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The current definition of CONFIG_PAGE_OFFSET is problematic for a couple
of reasons:
1) The value is misleading for normal 64-bit kernels, where it is
overridden at runtime if Sv48 or Sv39 is chosen. This is especially
the case for XIP kernels, which always use Sv39.
2) The option is not user-visible, but for NOMMU kernels it must be a
valid RAM address, and for !RELOCATABLE it must additionally be the
exact address where the kernel is loaded.
Fix both of these by removing the option.
1) For MMU kernels, drop the indirection through Kconfig. Additionally,
for XIP, drop the indirection through kernel_map.
2) For NOMMU kernels, use the user-visible physical RAM base if
provided. Otherwise, force the kernel to be relocatable.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Jesse Taube <mr.bossman075@gmail.com>
Link: https://lore.kernel.org/r/20241026171441.3047904-7-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
When adjusted to use the correctly-sized ELF types, relocate_kernel()
works on riscv32 as well. The caveat about crossing an intermediate page
table boundary does not apply to riscv32, since for Sv32 the early
kernel mapping uses only PGD entries. Since KASLR is not yet supported
on riscv32, this option is mostly useful for NOMMU.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20241026171441.3047904-6-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
These definitions are useful for relocating the kernel image as well,
regardless of the type of relocations used for modules.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20241026171441.3047904-5-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Move relocate_kernel() out of the CONFIG_MMU block so it can be called
from the NOMMU version of setup_vm(). Set some offsets in kernel_map so
relocate_kernel() does not need to be modified. Relocatable NOMMU
kernels can be loaded to any physical memory address; they no longer
depend on CONFIG_PAGE_OFFSET.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20241026171441.3047904-4-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
NOMMU kernels currently cannot access memory below the kernel link
address. Remove this restriction by setting PAGE_OFFSET to the actual
start of RAM, as determined from the devicetree. The kernel link address
must be a constant, so keep using CONFIG_PAGE_OFFSET for that purpose.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Jesse Taube <mr.bossman075@gmail.com>
Link: https://lore.kernel.org/r/20241026171441.3047904-3-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
This definition is already provided by include/generated/autoconf.h,
so it does not need to be provided on the command line.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Jesse Taube <mr.bossman075@gmail.com>
Link: https://lore.kernel.org/r/20241026171441.3047904-2-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
We're trying to mix non-PIC/PIE objects into the otherwise-PIE
relocatable kernels, to avoid GOT/PLT references during early boot
alternative resolution (which happens before the GOT/PLT are set up).
riscv64-unknown-linux-gnu-ld: arch/riscv/errata/sifive/errata.o: relocation R_RISCV_HI20 against `tlb_flush_all_threshold' can not be used when making a shared object; recompile with -fPIC
riscv64-unknown-linux-gnu-ld: arch/riscv/errata/thead/errata.o: relocation R_RISCV_HI20 against `riscv_cbom_block_size' can not be used when making a shared object; recompile with -fPIC
Fixes: 8dc2a7e8027f ("riscv: Fix relocatable kernels with early alternatives using -fno-pie")
Link: https://lore.kernel.org/r/20250326224506.27165-2-palmer@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/alexghiti/linux into for-next
riscv patches for 6.15-rc1
* A bunch of fixes:
- We were missing a secondary mmu notifier call when flushing the tlb which is required for IOMMU
- Fix ftrace panics by saving the registers as expected by ftrace
- Fix a couple of stimecmp usage related to cpu hotplug
- Fix a bunch of issues in the misaligned probing handling
* Perf improvements:
- Introduce support for runtime constant improving perf of d_hash()
- Add support for huge pfnmaps to improve tlb utilization
- Use Zawrs to improve smp_cond_load8/16() used by the queued spinlocks
* Hwprobe additions:
- Add support for Zicntr and Zihpm
- Add support for Zaamo and Zalrsc
- Add support for bfloat16 extensiosn
- Add support for Zicbom (only enabling clean and flush, not inval for security reasons)
* Misc:
- Add a kernel parameter to bypass the misaligned speed probing since we can't rely on Zicclsm
* tag 'riscv-mw1-6.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/alexghiti/linux: (1585 commits)
riscv: Add runtime constant support
riscv: Move nop definition to insn-def.h
Documentation/kernel-parameters: Add riscv unaligned speed parameters
riscv: Add parameter for skipping access speed tests
riscv: Fix set up of vector cpu hotplug callback
riscv: Fix set up of cpu hotplug callbacks
riscv: Change check_unaligned_access_speed_all_cpus to void
riscv: Fix check_unaligned_access_all_cpus
riscv: Fix riscv_online_cpu_vec
riscv: Annotate unaligned access init functions
KVM: riscv: selftests: Add Zaamo/Zalrsc extensions to get-reg-list test
RISC-V: KVM: Allow Zaamo/Zalrsc extensions for Guest/VM
riscv: hwprobe: export Zaamo and Zalrsc extensions
riscv: add parsing for Zaamo and Zalrsc extensions
dt-bindings: riscv: add Zaamo and Zalrsc ISA extension description
riscv: fgraph: Fix stack layout to match __arch_ftrace_regs argument of ftrace_return_to_handler
riscv: fgraph: Select HAVE_FUNCTION_GRAPH_TRACER depends on HAVE_DYNAMIC_FTRACE_WITH_ARGS
riscv: Fix missing __free_pages() in check_vector_unaligned_access()
riscv: Fix the __riscv_copy_vec_words_unaligned implementation
riscv: mm: Don't use %pK through printk
...
|
|
GC12 only has 1 mec.
Fixes: 52cb80c12e8a ("drm/amdgpu: Add gfx v12_0 ip block support (v6)")
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
GC11 only has 1 mec.
Fixes: 3d879e81f0f9 ("drm/amdgpu: add init support for GFX11 (v2)")
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add new gpu_metrics_v1_8 to acquire below host limit counters
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fetch VBIOS from shadow ROM when available before trying other methods
like EFI method.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Fixes: 9c081c11c621 ("drm/amdgpu: Reorder to read EFI exported ROM first")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4066
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Update smu metrics table to vesrion 0x10 for smu_v13_0_6
v2: Host metrics support removal moved to separate patch (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Firmware algorithm changed and the values in this version
are not accurate thereby remove host limit metric support
for smu_v13_0_6, smu_v13_0_12 & smu_v13_0_14
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
GC v9_4_2 uses a new versioning scheme for CP firmware, making
the warning ("CP firmware version too old, please update!") irrelevant.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
This looks unnecessary and actually extremely harmful since using kmap()
is not possible while inside the ring reset.
Remove all the extra mapping and unmapping of the MQDs.
v2: also fix debugfs
v3: fix coding style typo
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
this temporarily reverts
commit 6ec04e38b2f6 ("drm/amdgpu/sdma_v4_4_2: update VM flush implementation for SDMA")
it cause a regression.
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We should only increase the deferred errors in UMC block.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update ta ra block to keep sync with RAS TA.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Compute partition DPX is possible in NPS2 mode. Update the compatible
modes for DPX.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
