summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-01-05RISC-V: defconfigs: Remove redundant CONFIG_POWER_RESETPalmer Dabbelt
As of ab7fbad0c7d7 ("riscv: Fix unmet direct dependencies built based on SOC_VIRT") we select CONFIG_POWER_RESET=y along with CONFIG_SOC_VIRT, which is already in defconfig. This make setting CONFIG_POWER_RESET in the defconfigs redundant, so remove it to remain consistent with savedefconfig. Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-05RISC-V: defconfigs: Sort CONFIG_BLK_DEV_BSGPalmer Dabbelt
This should have no functional change, it just sorts CONFIG_BLK_DEV_BSG the same way savedefconfig does. Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-05RISC-V: defconfigs: Sort CONFIG_SURFACE_PLATFORMSPalmer Dabbelt
This should have no functional change, it just sorts CONFIG_SURFACE_PLATFORMS the same way savedefconfig does. Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-05RISC-V: defconfigs: Sort CONFIG_MMCPalmer Dabbelt
This should have no functional change, it just sorts CONFIG_MMC the same way savedefconfig does. This only touches the rv64 defconfig because rv32_defconfig was already sorted correctly. Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-05RISC-V: defconfigs: Sort CONFIG_PTP_1588_CLOCKPalmer Dabbelt
This should have no functional change, it just sorts CONFIG_PTP_1588_CLOCK the same way savedefconfig does. This only touches the rv64 defconfig because rv32_defconfig was already sorted correctly. Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-05RISC-V: defconfigs: Sort CONFIG_SOC_POLARFIREPalmer Dabbelt
This should have no functional change, it just sorts CONFIG_SOC_POLARFIRE the same way savedefconfig does. Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-05RISC-V: defconfigs: Sort CONFIG_SYSFS_SYSCALLPalmer Dabbelt
This should have no functional change, it just sorts CONFIG_SYSFS_SYSCALL the same way savedefconfig does. Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-05RISC-V: defconfigs: Sort CONFIG_BPF_SYSCALLPalmer Dabbelt
This should have no functional change, it just sorts CONFIG_BPF_SYSCALL the same way savedefconfig does. Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-05RISC-V: MAXPHYSMEM_2GB doesn't depend on CMODEL_MEDLOWPalmer Dabbelt
For non-relocatable kernels we need to be able to link the kernel at approximately PAGE_OFFSET, thus requiring medany (as medlow requires the code to be linked within 2GiB of 0). The inverse doesn't apply, though: since medany code can be linked anywhere it's fine to link it close to 0, so we can support the smaller memory config. Fixes: de5f4b8f634b ("RISC-V: Define MAXPHYSMEM_1GB only for RV32") Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-05RISC-V: defconfigs: Set CONFIG_FB=y, for FB consolePalmer Dabbelt
We have CONFIG_FRAMEBUFFER_CONSOLE=y in the defconfigs, but that depends on CONFIG_FB so it's not actually getting set. I'm assuming most users on real systems want a framebuffer console, so this enables CONFIG_FB to allow that to take effect. Fixes: 33c57c0d3c67 ("RISC-V: Add a basic defconfig") Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-05xdp: Add xdp_do_redirect_frame() for pre-computed xdp_framesToke Høiland-Jørgensen
Add an xdp_do_redirect_frame() variant which supports pre-computed xdp_frame structures. This will be used in bpf_prog_run() to avoid having to write to the xdp_frame structure when the XDP program doesn't modify the frame boundaries. Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20220103150812.87914-6-toke@redhat.com
2022-01-05xdp: Move conversion to xdp_frame out of map functionsToke Høiland-Jørgensen
All map redirect functions except XSK maps convert xdp_buff to xdp_frame before enqueueing it. So move this conversion of out the map functions and into xdp_do_redirect(). This removes a bit of duplicated code, but more importantly it makes it possible to support caller-allocated xdp_frame structures, which will be added in a subsequent commit. Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20220103150812.87914-5-toke@redhat.com
2022-01-05page_pool: Store the XDP mem idToke Høiland-Jørgensen
Store the XDP mem ID inside the page_pool struct so it can be retrieved later for use in bpf_prog_run(). Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Link: https://lore.kernel.org/bpf/20220103150812.87914-4-toke@redhat.com
2022-01-05page_pool: Add callback to init pages when they are allocatedToke Høiland-Jørgensen
Add a new callback function to page_pool that, if set, will be called every time a new page is allocated. This will be used from bpf_test_run() to initialise the page data with the data provided by userspace when running XDP programs with redirect turned on. Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Link: https://lore.kernel.org/bpf/20220103150812.87914-3-toke@redhat.com
2022-01-05xdp: Allow registering memory model without rxq referenceToke Høiland-Jørgensen
The functions that register an XDP memory model take a struct xdp_rxq as parameter, but the RXQ is not actually used for anything other than pulling out the struct xdp_mem_info that it embeds. So refactor the register functions and export variants that just take a pointer to the xdp_mem_info. This is in preparation for enabling XDP_REDIRECT in bpf_prog_run(), using a page_pool instance that is not connected to any network device. Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20220103150812.87914-2-toke@redhat.com
2022-01-05riscv: mm: Enable PMD split page table lock for RV64Kefeng Wang
After commit 1355c31eeb7e ("asm-generic: pgalloc: provide generic pmd_alloc_one() and pmd_free_one()"), the main part to support PMD split page table lock is in asm-generic/pgalloc.h. The only change is add pgtable_pmd_page_ctor() into alloc_pmd_late(), then we could enable ARCH_ENABLE_SPLIT_PMD_PTLOCK for RV64. Reviewed-by: Alexandre Ghiti <alex@ghiti.fr> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-05riscv: Make vmalloc/vmemmap end equal to the start of the next regionAlexandre Ghiti
We used to define VMALLOC_END equal to the start of the next region *minus one* which is inconsistent with the use of this define in the core code (for example, see the definitions of VMALLOC_TOTAL and is_vmalloc_addr). And then make the definition of VMEMMAP_END consistent with VMALLOC_END and all other regions actually. Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com> Reviewed-by: Jisheng Zhang <jszhang@kernel.org> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-05riscv: switch to relative extable and other improvementsPalmer Dabbelt
Similar as other architectures such as arm64, x86 and so on, use offsets relative to the exception table entry values rather than absolute addresses for both the exception locationand the fixup. And recently, arm64 and x86 remove anonymous out-of-line fixups, we want to acchieve the same result.
2022-01-05riscv: vmlinux.lds.S|vmlinux-xip.lds.S: remove `.fixup` sectionJisheng Zhang
These are no longer necessary now that we have a more standard extable mechanism. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-05riscv: extable: add a dedicated uaccess handlerJisheng Zhang
Inspired by commit 2e77a62cb3a6 ("arm64: extable: add a dedicated uaccess handler"), do similar to riscv to add a dedicated uaccess exception handler to update registers in exception context and subsequently return back into the function which faulted, so we remove the need for fixups specialized to each faulting instruction. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-05Merge branch 'samples/bpf: xdpsock app enhancements'Alexei Starovoitov
Ong Boon says: ==================== First of all, sorry for taking more time to get back to this series and thanks to all valuble feedback in series-1 at [1] from Jesper and Song Liu. Since then I have looked into what Jesper suggested in [2] and worked on revising the patch series into several patches for ease of review: v1->v2: 1/7: [No change]. Add VLAN tag (ID & Priority) to the generated Tx-Only frames. 2/7: [No change]. Add DMAC and SMAC setting to the generated Tx-Only frames. If parameters are not set, previous DMAC and SMAC are used. 3/7: [New]. Add support for selecting different CLOCK for clock_gettime() used in get_nsecs. 4/7: [New]. This is a total rework from series-1 3/4-patch [3]. It uses clock_nanosleep() suggested by Jesper. In addition, added statistic for Tx schedule variance under application stat (-a|--app-stats). Make the cyclic Tx operation and --poll mode to be mutually- exclusive. Still, the ability to specify TX cycle time and used together with batch size and packet count remain the same. 5/7: [New]. Add the support for TX process schedule policy and priority setting. By default, SCHED_OTHER policy is used. This too is matching the schedule policy setting in [2]. 6/7: [Change]. This is update from series-1 4/4-patch [4]. Added TX clean process time-out in 1s granularity with configurable retries count (-O|--retries). 7/7: [New]. Added timestamp for TX packet following pktgen_hdr format matching the implementation in [2]. However, the sequence ID remains the same as it is instead of process schedule diff in [2]. To summarize on what program options have been added with v2 series using an example below:- DMAC (-G) = fa:8d:f1:e2:0b:e8 SMAC (-H) = ce:17:07:17:3e:3a VLAN tagged (-V) VLAN ID (-J) = 12 VLAN Pri (-K) = 3 Tx Queue (-q) = 3 Cycle Time in us (-T) = 1000 Batch (-b) = 2 Packet Count = 6 Tx schedule policy (-W) = FIFO Tx schedule priority (-U) = 50 Clock selection (-w) = REALTIME Tx timeout retries(-O) = 5 Tx timestamp (-y) Cyclic Tx schedule stat (-a) Note: xdpsock sets UDP dest-port and src-port to 0x1000 as default. Sending Board ============= $ xdpsock -i eth0 -t -N -z -H ce:17:07:17:3e:3a -G fa:8d:f1:e2:0b:e8 \ -V -J 12 -K 3 -q 3 \ -T 1000 -b 2 -C 6 -W FIFO -U 50 -w REALTIME \ -O 5 -y -a sock0@eth0:3 txonly xdp-drv pps pkts 0.00 rx 0 0 tx 0 6 calls/s count rx empty polls 0 0 fill fail polls 0 0 copy tx sendtos 0 0 tx wakeup sendtos 0 5 opt polls 0 0 period min ave max cycle Cyclic TX 1000000 31033 32009 33397 3 Receiving Board =============== $ tcpdump -nei eth0 udp port 0x1000 -vv -Q in -X \ --time-stamp-precision nano tcpdump: listening on eth0, link-type EN10MB (Ethernet), capture size 262144 bytes 03:46:40.520111580 ce:17:07:17:3e:3a > fa:8d:f1:e2:0b:e8, ethertype 802.1Q (0x8100), length 62: vlan 12, p 3, ethertype IPv4, (tos 0x0, ttl 64, id 0, offset 0, flags [none], proto UDP (17), length 44) 10.10.10.16.4096 > 10.10.10.32.4096: [udp sum ok] UDP, length 16 0x0000: 4500 002c 0000 0000 4011 527e 0a0a 0a10 E..,....@.R~.... 0x0010: 0a0a 0a20 1000 1000 0018 e997 be9b e955 ...............U 0x0020: 0000 0000 61cd 2ba1 0006 987c ....a.+....| 03:46:40.520112163 ce:17:07:17:3e:3a > fa:8d:f1:e2:0b:e8, ethertype 802.1Q (0x8100), length 62: vlan 12, p 3, ethertype IPv4, (tos 0x0, ttl 64, id 0, offset 0, flags [none], proto UDP (17), length 44) 10.10.10.16.4096 > 10.10.10.32.4096: [udp sum ok] UDP, length 16 0x0000: 4500 002c 0000 0000 4011 527e 0a0a 0a10 E..,....@.R~.... 0x0010: 0a0a 0a20 1000 1000 0018 e996 be9b e955 ...............U 0x0020: 0000 0001 61cd 2ba1 0006 987c ....a.+....| 03:46:40.521066860 ce:17:07:17:3e:3a > fa:8d:f1:e2:0b:e8, ethertype 802.1Q (0x8100), length 62: vlan 12, p 3, ethertype IPv4, (tos 0x0, ttl 64, id 0, offset 0, flags [none], proto UDP (17), length 44) 10.10.10.16.4096 > 10.10.10.32.4096: [udp sum ok] UDP, length 16 0x0000: 4500 002c 0000 0000 4011 527e 0a0a 0a10 E..,....@.R~.... 0x0010: 0a0a 0a20 1000 1000 0018 e5af be9b e955 ...............U 0x0020: 0000 0002 61cd 2ba1 0006 9c62 ....a.+....b 03:46:40.521067012 ce:17:07:17:3e:3a > fa:8d:f1:e2:0b:e8, ethertype 802.1Q (0x8100), length 62: vlan 12, p 3, ethertype IPv4, (tos 0x0, ttl 64, id 0, offset 0, flags [none], proto UDP (17), length 44) 10.10.10.16.4096 > 10.10.10.32.4096: [udp sum ok] UDP, length 16 0x0000: 4500 002c 0000 0000 4011 527e 0a0a 0a10 E..,....@.R~.... 0x0010: 0a0a 0a20 1000 1000 0018 e5ae be9b e955 ...............U 0x0020: 0000 0003 61cd 2ba1 0006 9c62 ....a.+....b 03:46:40.522061935 ce:17:07:17:3e:3a > fa:8d:f1:e2:0b:e8, ethertype 802.1Q (0x8100), length 62: vlan 12, p 3, ethertype IPv4, (tos 0x0, ttl 64, id 0, offset 0, flags [none], proto UDP (17), length 44) 10.10.10.16.4096 > 10.10.10.32.4096: [udp sum ok] UDP, length 16 0x0000: 4500 002c 0000 0000 4011 527e 0a0a 0a10 E..,....@.R~.... 0x0010: 0a0a 0a20 1000 1000 0018 e1c5 be9b e955 ...............U 0x0020: 0000 0004 61cd 2ba1 0006 a04a ....a.+....J 03:46:40.522062173 ce:17:07:17:3e:3a > fa:8d:f1:e2:0b:e8, ethertype 802.1Q (0x8100), length 62: vlan 12, p 3, ethertype IPv4, (tos 0x0, ttl 64, id 0, offset 0, flags [none], proto UDP (17), length 44) 10.10.10.16.4096 > 10.10.10.32.4096: [udp sum ok] UDP, length 16 0x0000: 4500 002c 0000 0000 4011 527e 0a0a 0a10 E..,....@.R~.... 0x0010: 0a0a 0a20 1000 1000 0018 e1c4 be9b e955 ...............U 0x0020: 0000 0005 61cd 2ba1 0006 a04a ....a.+....J I have tested the above with both tagged and untagged packet format and based on the timestamp in tcpdump found that the timing of the batch cyclic transmission is correct. Appreciate if community can give the patch series v2 a try and point out any gap. Thanks Boon Leong [1] https://patchwork.kernel.org/project/netdevbpf/cover/20211124091821.3916046-1-boon.leong.ong@intel.com/ [2] https://github.com/netoptimizer/network-testing/blob/master/src/udp_pacer.c [3] https://patchwork.kernel.org/project/netdevbpf/patch/20211124091821.3916046-4-boon.leong.ong@intel.com/ [4] https://patchwork.kernel.org/project/netdevbpf/patch/20211124091821.3916046-5-boon.leong.ong@intel.com/ ==================== Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-01-05samples/bpf: xdpsock: Add timestamp for Tx-only operationOng Boon Leong
It may be useful to add timestamp for Tx packets for continuous or cyclic transmit operation. The timestamp and sequence ID of a Tx packet are stored according to pktgen header format. To enable per-packet timestamp, use -y|--tstamp option. If timestamp is off, pktgen header is not included in the UDP payload. This means receiving side can use the magic number for pktgen for differentiation. The implementation supports both VLAN tagged and untagged option. By default, the minimum packet size is set at 64B. However, if VLAN tagged is on (-V), the minimum packet size is increased to 66B just so to fit the pktgen_hdr size. Added hex_dump() into the code path just for future cross-checking. As before, simply change to "#define DEBUG_HEXDUMP 1" to inspect the accuracy of TX packet. Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211230035447.523177-8-boon.leong.ong@intel.com
2022-01-05samples/bpf: xdpsock: Add time-out for cleaning TxOng Boon Leong
When user sets tx-pkt-count and in case where there are invalid Tx frame, the complete_tx_only_all() process polls indefinitely. So, this patch adds a time-out mechanism into the process so that the application can terminate automatically after it retries 3*polling interval duration. v1->v2: Thanks to Jesper's and Song Liu's suggestion. - clean-up git message to remove polling log - make the Tx time-out retries configurable with 1s granularity Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211230035447.523177-7-boon.leong.ong@intel.com
2022-01-05samples/bpf: xdpsock: Add sched policy and priority supportOng Boon Leong
By default, TX schedule policy is SCHED_OTHER (round-robin time-sharing). To improve TX cyclic scheduling, we add SCHED_FIFO policy and its priority by using -W FIFO or --policy=FIFO and -U <PRIO> or --schpri=<PRIO>. A) From xdpsock --app-stats, for SCHED_OTHER policy: $ xdpsock -i eth0 -t -N -z -T 1000 -b 16 -C 100000 -a period min ave max cycle Cyclic TX 1000000 53507 75334 712642 6250 B) For SCHED_FIFO policy and schpri=50: $ xdpsock -i eth0 -t -N -z -T 1000 -b 16 -C 100000 -a -W FIFO -U 50 period min ave max cycle Cyclic TX 1000000 3699 24859 54397 6250 Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211230035447.523177-6-boon.leong.ong@intel.com
2022-01-05samples/bpf: xdpsock: Add cyclic TX operation capabilityOng Boon Leong
Tx cycle time is in micro-seconds unit. By combining the batch size (-b M) and Tx cycle time (-T|--tx-cycle N), xdpsock now can transmit batch-size of packets every N-us periodically. Cyclic TX operation is not applicable if --poll mode is used. To transmit 16 packets every 1ms cycle time for total of 100000 packets silently: $ xdpsock -i eth0 -T -N -z -T 1000 -b 16 -C 100000 To print cyclic TX schedule variance stats, use --app-stats|-a: $ xdpsock -i eth0 -T -N -z -T 1000 -b 16 -C 100000 -a sock0@eth0:0 txonly xdp-drv pps pkts 0.00 rx 0 0 tx 0 100000 calls/s count rx empty polls 0 0 fill fail polls 0 0 copy tx sendtos 0 0 tx wakeup sendtos 0 6254 opt polls 0 0 period min ave max cycle Cyclic TX 1000000 53507 75334 712642 6250 Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211230035447.523177-5-boon.leong.ong@intel.com
2022-01-05samples/bpf: xdpsock: Add clockid selection supportOng Boon Leong
User specifies the clock selection by using -w CLOCK or --clock=CLOCK where CLOCK=[REALTIME, TAI, BOOTTIME, MONOTONIC]. The default CLOCK selection is MONOTONIC. The implementation of clock selection parsing is borrowed from iproute2/tc/q_taprio.c Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211230035447.523177-4-boon.leong.ong@intel.com
2022-01-05samples/bpf: xdpsock: Add Dest and Src MAC setting for Tx-only operationOng Boon Leong
To set Dest MAC address (-G|--tx-dmac) only: $ xdpsock -i eth0 -t -N -z -G aa:bb:cc:dd:ee:ff To set Source MAC address (-H|--tx-smac) only: $ xdpsock -i eth0 -t -N -z -H 11:22:33:44:55:66 To set both Dest and Source MAC address: $ xdpsock -i eth0 -t -N -z -G aa:bb:cc:dd:ee:ff \ -H 11:22:33:44:55:66 The default Dest and Source MAC address remain the same as before. Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Link: https://lore.kernel.org/bpf/20211230035447.523177-3-boon.leong.ong@intel.com
2022-01-05samples/bpf: xdpsock: Add VLAN support for Tx-only operationOng Boon Leong
In multi-queue environment testing, the support for VLAN-tag based steering is useful. So, this patch adds the capability to add VLAN tag (VLAN ID and Priority) to the generated Tx frame. To set the VLAN ID=10 and Priority=2 for Tx only through TxQ=3: $ xdpsock -i eth0 -t -N -z -q 3 -V -J 10 -K 2 If VLAN ID (-J) and Priority (-K) is set, it default to VLAN ID = 1 VLAN Priority = 0. For example, VLAN-tagged Tx only, xdp copy mode through TxQ=1: $ xdpsock -i eth0 -t -N -c -q 1 -V Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20211230035447.523177-2-boon.leong.ong@intel.com
2022-01-05riscv: add gpr-num.hJisheng Zhang
This defines the mapping from ABI names to X registers. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-05riscv: extable: add `type` and `data` fieldsJisheng Zhang
This is a riscv port of commit d6e2cc564775 ("arm64: extable: add `type` and `data` fields"). Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-05riscv: extable: consolidate definitionsJisheng Zhang
This is a riscv port of commit 819771cc2892 ("arm64: extable: consolidate definitions"). Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-05riscv: lib: uaccess: fold fixups into bodyJisheng Zhang
uaccess functions such __asm_copy_to_user(), __arch_copy_from_user() and __clear_user() place their exception fixups in the `.fixup` section without any clear association with themselves. If we backtrace the fixup code, it will be symbolized as an offset from the nearest prior symbol. Similar as arm64 does, we must move fixups into the body of the functions themselves, after the usual fast-path returns. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-05riscv: extable: use `ex` for `exception_table_entry`Jisheng Zhang
The var name "fixup" is a bit confusing, since this is a exception_table_entry. Use "ex" instead to refer to an entire entry. In subsequent patches we'll use `fixup` to refer to the fixup field specifically. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-05riscv: extable: make fixup_exception() return boolJisheng Zhang
The return values of fixup_exception() and riscv_bpf_fixup_exception() represent a boolean condition rather than an error code, so it's better to return `bool` rather than `int`. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-05riscv: bpf: move rv_bpf_fixup_exception signature to extable.hJisheng Zhang
This is to group riscv related extable related functions signature into one file. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-05riscv: switch to relative exception tablesJisheng Zhang
Similar as other architectures such as arm64, x86 and so on, use offsets relative to the exception table entry values rather than absolute addresses for both the exception locationand the fixup. However, RISCV label difference will actually produce two relocations, a pair of R_RISCV_ADD32 and R_RISCV_SUB32. Take below simple code for example: $ cat test.S .section .text 1: nop .section __ex_table,"a" .balign 4 .long (1b - .) .previous $ riscv64-linux-gnu-gcc -c test.S $ riscv64-linux-gnu-readelf -r test.o Relocation section '.rela__ex_table' at offset 0x100 contains 2 entries: Offset Info Type Sym. Value Sym. Name + Addend 000000000000 000600000023 R_RISCV_ADD32 0000000000000000 .L1^B1 + 0 000000000000 000500000027 R_RISCV_SUB32 0000000000000000 .L0 + 0 The modpost will complain the R_RISCV_SUB32 relocation, so we need to patch modpost.c to skip this relocation for .rela__ex_table section. After this patch, the __ex_table section size of defconfig vmlinux is reduced from 7072 Bytes to 3536 Bytes. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-05riscv: consolidate __ex_table constructionJisheng Zhang
Consolidate all the __ex_table constuction code with a _ASM_EXTABLE helper. There should be no functional change as a result of this patch. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-05riscv: remove unused __cmpxchg_user() macroJisheng Zhang
This macro is defined but not used, remove it. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-05clk: Drop unused COMMON_CLK_STM32MP157_SCMI configSudeep Holla
Commit 21e743300dd0 ("clk: stm32mp1: new compatible for secure RCC support") introduced a new Kconfig option COMMON_CLK_STM32MP157_SCMI which is not used anywhere. Further, it looks like this Kconfig option is just to select bunch of other options which doesn't sound correct to me. There is no need for another SCMI firmware based clock driver and hence the same applies for the config option too. Let us just drop the unused COMMON_CLK_STM32MP157_SCMI before it gives someone idea to write a specific clock driver for this SoC/platform. Cc: Etienne Carriere <etienne.carriere@foss.st.com> Cc: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Cc: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Link: https://lore.kernel.org/r/20211015150043.140793-1-sudeep.holla@arm.com Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-01-05clk: st: clkgen-mux: search reg within node or parentAlain Volmat
In order to avoid having duplicated addresses within the DT, only have one unit-address per clockgen and each driver within the clockgen should look at the parent node (overall clockgen) to figure out the reg property. Such behavior is already in place in other STi platform clock drivers such as clk-flexgen and clkgen-pll. Keep backward compatibility by first looking at reg within the node before looking into the parent node. Signed-off-by: Alain Volmat <avolmat@me.com> Link: https://lore.kernel.org/r/20211218211157.188214-3-avolmat@me.com Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-01-05clk: st: clkgen-fsyn: search reg within node or parentAlain Volmat
In order to avoid having duplicated addresses within the DT, only have one unit-address per clockgen and each driver within the clockgen should look at the parent node (overall clockgen) to figure out the reg property. Such behavior is already in place in other STi platform clock drivers such as clk-flexgen and clkgen-pll. Keep backward compatibility by first looking at reg within the node before looking into the parent node. Signed-off-by: Alain Volmat <avolmat@me.com> Link: https://lore.kernel.org/r/20211218211157.188214-2-avolmat@me.com Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-01-05clk: Enable/Disable runtime PM for clk_summaryTaniya Das
The registers for some clocks in the SOC area, which are under the power domain are required to be enabled before accessing them. During the clk_summary if the power-domains are not enabled they could result into NoC errors. Thus ensure the register access of the clock controller is done with pm_untime_get/put functions. Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lore.kernel.org/r/1640018638-19436-3-git-send-email-tdas@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-01-05Merge branch 'net-lantiq_xrx200-improve-ethernet-performance'Jakub Kicinski
Aleksander Jan Bajkowski says: ==================== net: lantiq_xrx200: improve ethernet performance This patchset improves Ethernet performance by 15%. NAT Performance results on BT Home Hub 5A (kernel 5.10.89, mtu 1500): Down Up Before 539 Mbps 599 Mbps After 624 Mbps 695 Mbps ==================== Link: https://lore.kernel.org/r/20220104151144.181736-1-olek2@wp.pl Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-05net: lantiq_xrx200: convert to build_skbAleksander Jan Bajkowski
We can increase the efficiency of rx path by using buffers to receive packets then build SKBs around them just before passing into the network stack. In contrast, preallocating SKBs too early reduces CPU cache efficiency. NAT Performance results on BT Home Hub 5A (kernel 5.10.89, mtu 1500): Down Up Before 577 Mbps 648 Mbps After 624 Mbps 695 Mbps Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-05net: lantiq_xrx200: increase napi poll weigthAleksander Jan Bajkowski
NAT Performance results on BT Home Hub 5A (kernel 5.10.89, mtu 1500): Down Up Before 545 Mbps 625 Mbps After 577 Mbps 648 Mbps Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-05MIPS: lantiq: dma: increase descritor countAleksander Jan Bajkowski
NAT Performance results on BT Home Hub 5A (kernel 5.10.89, mtu 1500): Down Up Before 539 Mbps 599 Mbps After 545 Mbps 625 Mbps Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-05MAINTAINERS: Add entries for Toshiba Visconti PLL and clock controllerNobuhiro Iwamatsu
Add entries for Toshiba Visconti PLL and clock controller binding and driver. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Link: https://lore.kernel.org/r/20211025031038.4180686-5-nobuhiro1.iwamatsu@toshiba.co.jp Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-01-05clk: visconti: Add support common clock driver and reset driverNobuhiro Iwamatsu
Add support for common interface of the common clock and reset driver for Toshiba Visconti5 and its SoC, TMPV7708. The PIPLLCT provides the PLL, and the PISMU provides clock and reset functionality. Each drivers are provided in this patch. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Link: https://lore.kernel.org/r/20211025031038.4180686-4-nobuhiro1.iwamatsu@toshiba.co.jp [sboyd@kernel.org: Add bitfield.h include to pll.c] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-01-05testptp: set pin function before other requestsMiroslav Lichvar
When the -L option of the testptp utility is specified with other options (e.g. -p to enable PPS output), the user probably wants to apply it to the pin configured by the -L option. Reorder the code to set the pin function before other function requests to avoid confusing users. Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/20220105152506.3256026-1-mlichvar@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-05dt-bindings: clock: Add DT bindings for SMU of Toshiba Visconti TMPV770x SoCNobuhiro Iwamatsu
Add device tree bindings for SMU (System Management Unit) controller of Toshiba Visconti TMPV770x SoC series. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211025031038.4180686-3-nobuhiro1.iwamatsu@toshiba.co.jp Signed-off-by: Stephen Boyd <sboyd@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-23 20:29:03 +0000